Libec TH-M Kit Hands-Free Monopod Kit

Libec TH-M Kit Hands-Free Monopod Kit(TH-M-Kit, THM-Kit, TH M-Kit) The TH-M Hands-Free Monopod Kit from Libec is a hands-free monopod support system for recording with a video camera, camcorder, mirrorless, or DSLR camera. It features a 9 lb load capacity, a maximum working height of 74.6", and a minimum working height of 34.4". A Perfect Lock feature makes it easy to maneuver the monopod's head, and lock and release foot pedals let you quickly lock and release the unit during photo and video shoots. Designed to be a hands-free device, the monopod stands on its own with a wide range of cameras, allowing users to multi-task and make equipment adjustments in between shots, and the smooth movements of the head allow manual focus while simultaneously panning, tilting, and shooting. This kit's dual-head structure features a flat base and 65mm bowl, making the head compatible with 65mm bowls, flat base tripods, monopods, sliders, skater dollies, and other equipment with 3/8"-16 screws. The head features a one touch on/off sliding plate that is compatible with Manfrotto and Sachtler heads, and a dual-size, padded, travel bag is included so you can store and carry the monopod with or without the head. Hands-Free Monopod Fold-out feet increase stability and allow the monopod to stand on its own with a wide range of cameras, allowing you to multi-task and make equipment adjustments in between shots, without the need to lay the monopod on the ground or floor or lean it against a wall. Perfect Lock Feature Lock the bottom part of the monopod by stepping on the foot pedal, and the ball joint will be locked as well. This ensures the pan movement of the head on the monopod is smooth and allows you to control the camera's manual focus while panning and shooting. Upgraded Head Attachment The top cover of the TH-M monopod is equipped with both a 1/4"-20 and a 3/8"-16 screw hole. The 1/4"-20 screw is covered by a storable 3/8"-16 screw socket, allowing both kinds of equipment to be attached. Smooth Panoramic Rotation At the base of the unit a special built-in lubricated ball joint system, designed to prevent dust and debris from entering, offers smooth quality movements. Quick Adjustments for Your Preferred Height A sleek design with numeric indicators for preferred height settings improves the usability of the monopod when it's necessary to frequently adjust height settings. Speedy Open and Close Functions Designed for swift setups and compact travel, user-friendly folding legs can be easily opened and closed with a push of a button. Pan Tilt Head with Dual Head Structure The head has tilt and pan functions, and the unit's dual-head structure features a flat base and 65mm bowl, making the head compatible with 65mm bowls, flat base tripods, monopods, sliders, skater dollies, and other equipment with 3/8"-16 screws. Sliding Plates Compatible with Manfrotto and Sachtler Heads This one touch on/off sliding plate is compatible with Manfrotto and Sachtler heads, enabling quick equipment swaps without the need to change sliding plates. Dual size Carrying Bag   A dual size travel bag is included to carry and store the monopod with or without the head.

Libec TH-M Hands-Free Monopod

Libec TH-M Hands-Free Monopod(TH-M, THM,TH M) The TH-M Hands-Free Monopod from Libec is an easy-to-use, three-section monopod. It features a 17.6 lb load capacity, a maximum working height of 69.3", and a minimum working height of 29". On the top cover of the monopod, a 1/4"-20 screw is covered by a storable 3/8"-16 screw socket, allowing both kinds of equipment to be attached, and fold-out feet enable the TH-M to stand on its own, allowing you to multi-task and make equipment adjustments in between shots. Flip-out lever locks let you quickly adjust height, and numeric indicators for your preferred height settings let you frequently adjust and return to those settings. For smooth and quality movements, the base of the unit provides a built-in lubricated ball joint system, and the easy-to-clean base lets you remove dirt and debris when necessary. Designed for swift setup and compact travel, the unit's folding legs can be opened and closed with a push of a button, and a padded travel bag for storage and transport is included. Hands-Free Monopod Fold-out feet increase stability and allow the monopod to stand on its own with a wide range of cameras, allowing you to multi-task and make equipment adjustments in between shots, without the need to lay the monopod on the ground or floor or lean it against a wall. Perfect Lock Feature Locks the ball joint and bottom part of the monopod by stepping on the foot pedal. Head Attachment The top cover of the TH-M monopod is equipped with both a 1/4"-20 and a 3/8"-16 screw. The 1/4"-20 screw is covered by a storable 3/8"-16 screw socket, allowing both kinds of equipment to be attached. Smooth Panoramic Rotation At the base of the unit, a special built-in lubricated ball joint system that is designed to prevent dust and debris from entering offers smooth quality movements. Quick Adjustments for Your Preferred Height A sleek design with numeric indicators for preferred height settings improves the usability of the monopod when it's necessary to frequently adjust height settings. Speedy Open and Close Functions Designed for swift setups and compact travel, user-friendly folding legs can be easily opened and closed with a push of a button. Dual Size Carrying Bag A dual-size travel bag is included to carry and store the monopod with or without a head.

Libec SS-5 2x Monopod Set

Libec SS-5 2x Monopod Set(SS-5,SS5, SS 5) The Libec SS-5 Monopod Set includes two monopods for providing additional support for your ALX S series slider when the slider is already mounted on a tripod. Instead of carrying around two tripods, you can mount your slider on one tripod, and then secure one of these monopods under each end of the slider. The monopods will hold up the ends while your tripod holds up the middle of the slider. The monopods are height adjustable from approximately 17 to 55" in four stages and secured via flip locks at each stage. They're made of aluminum and feature a 1/4"-20 mounting screw on top for securing into the slider. A knob near the mounting platform allows you to adjust the tilt position of the mounting platform, allowing you to find the sweet spot when securing to your slider.    

Libec HS-450 Tripod System - FS

Libec HS-450 Tripod System - FS(HS-450 , HS 450 , HS450 ) Perfect Balance Libec's unique continuous perfect counterbalance system enables the camera to perfectly balance at any tilt angle. This smooth balance system makes it a lot easier for users to concentrate on precise camera movements, even when using a telephoto lens at its maximum zoomed position. Newly Designed Fluid Head From scratch, the fluid head was designed to dramatically reduce play inside its superior pan and tilt drag units, dramatically increasing its longevity. From start to finish, this new fluid head provides ultra-smooth movements and is equipped with many features that enhance a user's experience. Counterbalance Meter Equipped with a counterbalance meter with the measurement range of 0 to 100. This allows users to glance at the head's minimum/maximum inner spring strength, making camera balances on site a piece of cake. Snap On/Off Plate The slide plate can be attached and released with just one-touch. Quick and easy setups in the field are easily achieved. Advanced Drag Unit The layered metal unit in the drag system ensures operability, durability and reliability. Thanks to the finest silicon grease applied, the advanced drag unit offers smoother starts and ultimately improved backlash control. In addition, the grease provides ordinary pan and tilt movements at a wide temperature range from -40˚C/-40˚F up to +60˚C/+140˚F. The variable 4 step drag pan tilt system features a zero "free" mode option with no friction. Unlike other brand heads, there is no need to store it in its zero "free" mode. Dual Head The Dual-head base specification allows for a quick set-up with both 75mm bowl and flat base tripods. The Dual-head base is also compatible with sliders, skater dollies, and photo tripods. User Friendly Accessory Port Equipped on the fluid head's side, there are 1/4 and 3/8 inch screw holes allowing users to attach an accessory arm to hold monitors, lights and other accessories. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance of the head are not affected. LED Bubble Level   The bubble level is equipped with an LED light allowing users to level a tripod head in the dark. In addition, the counterbalance meter is also illuminated.

Libec H45 75mm ball and flat base video head

Libec H45 75mm ball and flat base video head(H45) Integrate a fluid head into your tripod configuration with various adjustment features using this H45 75mm Ball and Flat Base Video Head with Pan Handle from Libec. An included pan handle makes for easy movement up and down or side to side. Independent pan and tilt adjustments make movements intuitive and smooth. The H45 head has a load capacity of 26.5 lb and an adjustable counterbalance range of 9.9 to 23.1 lb.   Your camera is secured via a 1/4"-20 screw and locating pin, and additional 3/8"-16 and 1/4"-20 screws are included for further attachments. The head also comes with a long sliding plate with one 3/8"-16 screw and one 1/4"-20 screw. An illuminated bubble level ensures your configuration is level when mounted onto tripod legs. The H45 is compatible with Manfrotto or Sachtler heads.

Libec 75mm ball and flat base video head H35

Libec 75mm ball and flat base video head  H35(H35) Perfect Balance Libec's unique continuous perfect counterbalance system enables the camera to perfectly balance at any tilt angle. This smooth balance system makes it a lot easier for users to concentrate on precise camera movements, even when using a telephoto lens at its maximum zoomed position. Newly Designed Fluid Head From scratch, the fluid head was designed to dramatically reduce play inside its superior pan and tilt drag units, dramatically increasing its longevity. From start to finish, this new fluid head provides ultra-smooth movements and is equipped with many features that enhance a user's experience. Counterbalance Meter Equipped with a counterbalance meter with the measurement range of 0 to 100. This allows users to glance at the head's minimum/maximum inner spring strength, making camera balances on site a piece of cake. Snap On/Off Plate The slide plate can be attached and released with just one-touch. Quick and easy setups in the field are easily achieved. Advanced Drag Unit The layered metal unit in the drag system ensures operability, durability and reliability. Thanks to the finest silicon grease applied, the advanced drag unit offers smoother starts and ultimately improved backlash control. In addition, the grease provides ordinary pan and tilt movements at a wide temperature range from -40˚C/-40˚F up to +60˚C/+140˚F. The variable 4 step drag pan tilt system features a zero "free" mode option with no friction. Unlike other brand heads, there is no need to store it in its zero "free" mode. Dual Head The Dual-head base specification allows for a quick set-up with both 75mm bowl and flat base tripods. The Dual-head base is also compatible with sliders, skater dollies, and photo tripods. User Friendly Accessory Port Equipped on the fluid head's side, there are 1/4 and 3/8 inch screw holes allowing users to attach an accessory arm to hold monitors, lights and other accessories. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance of the head are not affected. LED Bubble Level   The bubble level is equipped with an LED light allowing users to level a tripod head in the dark. In addition, the counterbalance meter is also illuminated.

Libec FP-6B Large rubber feet

Libec FP-6B Large rubber feet(FP-6B, FP6B, FP 6B) The replacement Large Rubber Foot Pads for Select Tripods from Libec are compatible with their T102B, T103B, T150B, and T150C tripods. The rubber pads attach to the bottom of each leg and prevent the tripod from sliding on smooth surfaces.

Libec JB40-KIT Jib Arm Kit with Tripod And Dolly

Libec JB40-KIT (JB40/KIT, JB40_KIT, JB40KIT, JB40 KIT, jb40-kit) Jib Arm Kit with Tripod And Dolly Professional Jib arm with T102B tripod and DL-8RB dolly . JB40 KIT includes Jib arm：JB40, Tripod：T102B, Dolly：DL-8RB, Weight Kit: WEIGHT30 KIT. As the successor to the best selling jib arm JB30, the new JB40 has been redesigned for professionals who can enjoy and appreciate a rigid, compact and lightweight jib arm. The JB40 jib arm is the ideal solution for front operations as it provides outstanding stability and flexibility to users who work with heavy cameras onsite. Simply designed for quick and easy setup, the JB40 enables even the smallest crew to effortlessly and comfortably operate the jib. Buy Libec JB40 KIT from UBMS Dubai. We can provide best price and fast delivery for all Libec products. UBMS is the authorized Libec dealer in Middle East . Rigidity JB40 can support weights up to 20kg and is designed to minimize wobbling or bending of the arm, resulting in smooth and stable camera shots. High Portability When folded and stored in its respective included carrying case, the jib arm is only about 120cm in length and easily fits in the trunk of a car. Although the jib arm only weighs 10kg, the case's shoulder strap offers extra support and reduces the burden of transportation. Compact Design By sliding the main arm, the jib arm becomes remarkably compact with a radius of about one meter, making it perfectly suitable for any production set including sets in tight places. Redesigned Weight Mounting Method By changing the weight bar's design from the former JB-30's Screw-in type to a new Plug-in type for the JB40, assembly and break down time is dramatically decreased. 3-Step Easy Setup Connect the support arms, set the jib on the tripod, and adjust the balance. With only 3 steps, the JB40 is ready for any video production. Compatibility In addition to Libec's 100mm tripods, the JB40 jib arm can also be used with other brand tripods you may already own. 100mm to 75mm Conversion Adapter A 75mm ball base fluid head can be attached by using the included adapter AD-75.