Matthews - Dutti Dolly Tripod Wings

Matthews - Dutti Dolly Tripod Wings - 395410 The Dutti Dolly Tripod Wing kit was designed to accommodate mid-level and floor spreader tripods with a 30” diameter or less. No tools required, but a ratchet strap or rope tie might be helpful in securing the tripod for faster, more aggressive moves.

Camgear TERRA II AL Pedestal

2760.0169 27600169 2760 0169 2760/0169 Ensures effortless setup and great ease of use Provides a wide height range from 92.5 cm/36.4 in up to 171 cm/67.3 in Adjustable tripod leg height which allows you to reach a greater height range without using any extensions Precise, smooth and low noise in-shot column movement with 36 cm/14.2 in stroke  Convenient air adjustable column for quick payload balancing Multiple wheel positions for linear or radius dolly tracking Center hub locking column with adjustable spreading arm and tripod leg support Robust and easy to manage steering wheel with a diameter of 35 cm/13.8 in Strong and adjustable cable guards Supplied with portable hand pump

Camgear Dolly L

2760.0077 27600077 2760 0077 2760/0077 For DV6P, V10, V12, V15P, V20P, V25P,  V35P & all Elite Tripod Systems

Camgear Dolly XL

2760.0123 27600123 2760 0123 2760/0123 For V60S EFP, V60 Studio/OB, V90 Studio/OB & Elite 25 Tripod Systems

DL-10RB-COMPACT Dolly for Select Libec, Sachtler & Vinten Tripods

Libec DL-10RB-COMPACT (DL_10RB_COMPACT, DL/10RB/COMPACT, DL 10RB COMPACT) Dolly for Select Libec, Sachtler & Vinten Tripods The DL-10RB Compact Dolly from Libec is a foldable dolly for select Libec, Sachtler, and Vinten video tripods. It features a 242.5 lb payload, locking wheels, and an aluminum structure, along with an integrated carrying handle and detachable cable guards.

Manfrotto 127VS Variable Spread Basic Dolly

Manfrotto MAN-127VS (MAN/127VS, MAN127VS, MAN_127VS) (127-VS, 127/VS) 127VS Variable Spread Basic Dolly The Manfrotto 127VS is the variable leg portable dolly. This dolly has a special feature that allows adjustment of the radius from a maximum of 44.9" to as little as 30.7". This dolly is suitable for all tripod foot types.  

Hague D9 Camera Table Tracking Dolly

Hague D9 (D 9, D-9, D/9, d9) Camera Table Tracking Dolly The Hague D9 Table Dolly enables you get tracking shots on a table, board or any smooth surface. The high quality 80mm diameter wheels have twin sealed radial ball bearings, which make the table dolly easy and quiet to move. The dolly will track in a straight line or it can be set to track in an arc, to go round an item. On top of the dolly is a 75mm bowl, this enables you to transfer your “75mm bowl type” video head from your tripod onto the dolly and level it off on the bowl mount. You then have the facility to be able to both pan and tilt whilst tracking the dolly. The large footprint of the dolly prevents tipping or slipping when using the video head. It's ideal for both DSLRs and camcorders. An articulated arm, for a monitor or other accessory, can be fastened to the dolly using one of the table dollies 1/4” or 3/8” threaded mounting points. Includes D9 Table Dolly. The price does not include the video head, camera, monitor or any other accessories shown.  

Hague D10 Camera Skater Ladder Dolly

Hague D10 (D-10, D 10, D/10, d10) Camera Skater Ladder Dolly The Hague dual purpose Skater Ladder Dolly runs on any smooth, flat surface and the wheels can be set to track in a straight line or angled to track round an object.  The Hague Skater Ladder Dolly also runs on a ladder to create tracking shots over any terrain. The high quality wheels have sealed radial ball bearings to ensure super smooth movement. Your video head can easily attach to the dolly as it has a 75mm bowl mount. This means you can simply remove the head from your tripod and mount it on the dolly, with the facility to level off the head. The 75mm bowl levelling system has now become the most popular on the majority of professional tripods. When the dolly is mounted onto a ladder an extra set of guide wheels are used to prevent it from coming off the ladder and the dolly’s width is adjustable to accommodate the different widths of ladder.   A ladder makes an ideal track as it can just be laid on the ground for low shots or suspended above ground for higher shots or to go over an item. This enables you to get tracking shots over any terrain. Optional ladder supports are available to suspend the ladder between two tripods or to level off the ladder when used on the ground. A track kit is also available, with the advantage of the track breaking down to shorter lengths for easier transportation.

Hague Tripod Tracking Dolly (Inc Track)

D5T - Hague Tripod Tracking Dolly Kit The Hague D5T Tripod Tracking Dolly has two sets of locating holes for the tripod legs, which means the tripod can be used in both high and low positions. It has eight radial ball bearing wheels which set the track width to the correct positions as the dolly moves down the track. The Tracking Dolly is ideal for use on location or in the studio, all you need is a reasonably flat surface. The dollies width has been set to allow it to go through doorways, it has its own levelling system which prevents any rocking should the track be on uneven ground. It runs on inexpensive 40mm dia. PVC pipe which can be supplied or is available from DIY stores. The dolly will accept all tripods that have feet smaller than 45mm in diameter or with a base spreader, 3 straps are supplied for securing your tripod to the dolly and also supplied are 2 track connectors for joining your track.

Libec TR-320 Tracking Dolly Rail System

Libec TR-320 (TR_320, TR/320, TR 320) Tracking Dolly Rail System The TR-320 includes a set of 80cm/31.5" aluminum pipes to construct a 320cm/126" tracking rail. The dolly offers high-performance bearings and a specialized tracking system to prevent derailing. This allows smooth moving shots on either straight or curved rails. With a simple screw-in mechanism, pipes can be easily and firmly assembled, which enables a quick set up. The CR-90 curved rail and the EX-160S straight extension rails are also available, which offers more shooting flexibility.     

Manfrotto Cine/Video Dolly with Spiked Feet and Individual Brakes

Manfrotto 114Mv (114-Mv, 114/Mv, 114 Mv) Cine/Video Dolly with Spiked Feet and Individual Brakes The ultimate sturdy, multi-purpose, and reliable video dolly. You’ll feel in total control when using the cleverly designed Cine/Video Dolly with Spiked Feet and Individual Brakes. It’s made for heavy lifting, and adaptable enough to use with a variety of tripods. You can pair it with both still and video tripods, and stands with spiked feet, so you’ll always have the right dolly for any job. Able to support a maximum 60kg and made from ultra-strong, super lightweight aluminium, it’s a video dolly that ticks all the essential boxes for busy professionals on the go. You can set up fast, and collapse with ease when you’re done. In fact, despite its impressive heavy lifting capabilities, it’s a compact package when tidied away. This makes it easy to store, a cinch to carry, and the perfect video dolly for challenging outdoor shoots. To add to its list of great design features, it also has smart locks on each individual 127mm wheel. This gives you the freedom to tinker, without any troublesome slips at the crucial moment, and it gives you even more control when everything’s locked down, which is especially ideal on rough terrain. Plus, locking each wheel on this user-friendly video dolly can be done in a jiffy, without any fumbling, so you can concentrate fully on the task in hand. The wheels even have separate cable guards, for extra peace of mind and complete safety while you work.