SHAPE Sony a7S III Offset Shoulder Mount

SH-A7S3OF SH/A7S3OF SHA7S3OF SH A7S3OF SHAPE Sony a7S III Offset Shoulder Mount About The SHAPE Sony A7SIII Offset Shoulder Mount Sony Alpha A7S III cage Made from CNC-machined aluminium, the cage is specially designed for the Sony Alpha a7S III. The camera is strongly mounted to the cage using a 1/4-20 screw and an Allen key. The cage is designed with the following mounting options: (1) cold shoe, several 1/4-20 threaded holes and (7) 3/8"-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 3 left cables as well as your 4K FULL HDMI cable is included with the cage. The bottom of the cage has (2) 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. A DELTA adapter (included in this package) can be added to mount on 15 LWS baseplate,  an ARRI rosette can be added on the right side to mount compatible accessories (included in this package). Wooden Push-Button Top Handle The ergonomic and easily removable SHAPE Top Handle was designed to provide the required space for mounting your Audio Unit. It offers a comfortable and secure wooden grip for carrying your camera and securing accessories. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its locked. This nicely crafted Push-Button Top Handle provides multiple mounting options, including ARRI Standard 3/8″-16 anti-rotating hole patterns on the top, SHAPE Standard 1/4″-20 anti-rotating hole patterns on the top and side, cold shoe mounts, and a 3/8″-16 UNC threaded hole at the front. The SHAPE Rod Clamp at the front (15CTH) can be added, allowing you to directly mount a 15 mm rod onto the handle. Made of CNC aluminium, the 15 mm LW Clamp (15CTH) can be easily attached to the top Handle. The clamp is designed to support a 15 mm rod such as the SHAPE REVOLT EVF Mount Bracket. The ratchet knob clamp lets you adjust and strongly fix the position of the 15 mm rod to the SHAPE Top Handle and (2) cold shoe mounts, one at the front of the handle and one at the back. Quick handle rod bloc (HAND5) The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminium rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. Composite mini shoulder pad (SHPAD3) The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently. Back pad (PAD1) The back pad (PAD1) features a powder coated anodized aluminium plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights. 15 mm 10" rods (15TUBE10) This pair of SHAPE 15 mm aluminium Rods (10") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish. 15 mm 12" rods (15TUBE12) This pair of SHAPE 15 mm aluminium Rods (12") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

Shape Cage Kit with Matte Box & Follow Focus for Blackmagic Pocket Cinema Camera 4K

Shape SH-BM4SMKIT (SHBM4SMKIT, SH_BM4SMKIT, SH/BM4SMKIT, SH BM4SMKIT) Cage Kit with Matte Box & Follow Focus for Blackmagic Pocket Cinema Camera 4K CBM4K cage made of CNC Machined Aluminium with Shoulder Mount. Also includes Matte Box 4x4, Follow Focus, Top Handle, Quick Handles, 15mm Quick Release Rod Base System and 15mm Rods. Top and bottom of the cage designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble.

Shape Cage Kit with Matte Box & Follow Focus for Blackmagic Pocket Cinema Camera 4K

Shape SH-BM4KIT (SHBM4KIT, SH/BM4KIT, SH BM4KIT, SH_BM4KIT) Cage Kit with Matte Box & Follow Focus for Blackmagic Pocket Cinema Camera 4K CBM4K cage made of CNC Machined Aluminium. Also includes matte box 4x4, follow focus, top handle, 15mm quick release rod base system and 15mm rods. Top and bottom of the cage designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble.

Shape Blackmagic Pocket Cinema 4K Offset Shoulder Mount

Shape SH-BM4KSMOF (SHBM4KSMOF, SH/BM4KSMOF, SH_BM4KSMOF, SH BM4KSMOF) Blackmagic Pocket Cinema 4K Offset Shoulder Mount CBM4K cage made of CNC Machined Aluminium with shoulder mount and back pad. Also includes top handle, pair of quick handles, 15mm quick release rod base system, rods and offset rail rod bloc. Top and bottom of the cage designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble.

Shape Blackmagic Pocket Cinema 4K Shoulder Mount

Shape SH-BM4KSM (SH/BM4KSM, SHBM4KSM, SH_BM4KSM, SH BM4KSM) Blackmagic Pocket Cinema 4K Shoulder Mount CBM4K cage made of CNC Machined Aluminium with shoulder mount and back pad. Also includes top handle, pair of quick handles, 15mm quick release rod base system and rods. Top and bottom of the cage designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble.

Shape Camera Cage with 15mm Rod System for Blackmagic Pocket Cinema 4K

Shape SH-C4KROD (SH/C4KROD, SH_C4KROD, SH C4KROD, SHC4KROD) Camera Cage with 15mm Rod System for Blackmagic Pocket Cinema 4K Cage made of CNC Machined Aluminium. Top and bottom designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble - you don’t need to remove any parts to install the camera. Includes top handle, 15mm quick release rod base system and rods.

Shape Blackmagic Pocket Cinema 4K Handheld Cage

Shape SH-BM4KHH (SH/BM4KHH, SH_BM4KHH, SHBM4KHH, SH BM4KHH) Blackmagic Pocket Cinema 4K Handheld Cage Shape BM4KHH (BM4K-HH) Handheld Cage for Blackmagic made of CNC Machined Aluminium. Top and bottom of the cage are designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble - you don’t need to remove any parts to install the camera. Includes rod indexable left side wooden handle.

Shape DSLR Kirk Neff Offset Rig

Shape SH-DSLRKN2 (SH_DSLRKN2, SHDSLRKN2, SH DSLRKN2, SH/DSLRKN2) DSLR Kirk Neff Offset Rig The DSLR Kirk Neff Offset Rig from SHAPE is a 15mm rod, shoulder-mount solution designed for DSLR or other compact cameras. The offset design places your camera's LCD screen in front of your eyes for easier viewing while shooting. Centered around the DSLR Kirk Neff Baseplate 2.0, the rig features a rod offset bracket, and a pair of 10" and 12" long 15mm rods that support the included shoulder pad and handgrips. The shoulder pad and handgrips can be removed for tripod-mounted setups. Your camera attaches to the baseplate via a V-lock quick-release camera plate. The plate is also compatible with third party support systems that utilize the V-lock interface. The baseplate provides clamps to support one of the 15mm rod pairs, allowing you to the dual handgrips in front of the baseplate, as well as the rod offset bracket behind it. The Quick Handle Rod Bloc provides dual handgrip support and features SHAPE's push button rosette release, which allows you to adjust the angle of the handgrips without having to remove your hands from the rig. At the rear of the rig is the Mini Composite Shoulder Pad which provides padded shoulder support for the rig. It mounts onto the pair of 15mm rods extending out the back of the rod offset bracket. A Back Pad is included which attaches to the shoulder pad for augmented camera support and comfort. A 1/4"-20 hole allows for additional accessories to be added. DSLR Kirk Neff Baseplate 2.0 The DSLR Kirk Neff Baseplate 2.0 from SHAPE is a 15mm rod baseplate designed for DSLR cameras that utilizes a standard V-lock quick-release system. The quick-release plate provides a 1/4"-20 threaded camera screw and has rubber stoppers at the back to prevent your camera from twisting during operation. The rubber stoppers can be adjusted and removed using the included hex key. For alignment and balance adjustments, the V-lock delta adapter on the bottom of the quick-release plate can be also adjusted forward/backward, and the camera screw can be placed in a front or rear position - using appropriate hex keys. The baseplate itself features two 15mm rod ports with thumbscrews. It's design places the optical center of camera between the two rods and places the lens at a height suitable for use with a matte box. A pair of 8" aluminum rods come included. 15mm rod baseplate for DSLR cameras V-lock quick-release system Adjustable and removable rubber stoppers on quick-release plate prevent camera for twisting 1/4"-20 camera screw Baseplate respects DSLR optical center 8" aluminum 15mm rods included Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Quick Handle Provides professional video stabilization with 2 handles Each handle offers 360° individual rotation Offers easy attachment/removal Rod Block Composed of anodized aluminum Offers composite camera support for all 15mm rods Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob With 2 screw-threaded holes, the Rod Block provides for attachment of components Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Compatible Support Series: Composite Cameleon Sumo Spider Off-Set Bracket for Blackmagic Cage The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. 15mm Aluminum Rods (Pair, 12") This pair of Shape 15mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.  

Shape ARRI Standard Bridgeplate and 12" Dovetail Plate with 19mm Rods

Shape SH-DPK19 (SH/DPK19, SH_DPK19, SHDPK19, SH DPK19) ARRI Standard Bridgeplate and 12" Dovetail Plate with 19mm Rods SHAPE ARRI Standard 19mm Studio Bridge Plate & 12′′ Dovetail Plate Kit DPK19 This lightweight and strong aluminum body ARRI Standard 19mm Studio Bridge Plate slides onto an ARRI Standard Dovetail Plate and uses 19mm rods (12′′) (rods spaced104mm center to center). Additionally, the Bridge Plate is equipped with a convenient Custom Flat Screwdriver that is integrated and secured by a magnet, used to quickly tighten the 1/4′′-20 and 3/8′′-16 UNC captive screws (included) that hold the base components together. There is also a locking lever to lock the Bridge Plate firmly in place and a slotted design to accommodate screw spacings. The SHAPE Lightweight ARRI Standard 12′′ Dovetail Plate allows you to quickly and easily balance the weight when using front or back heavy camera equipment. It also features an easy-to-access stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. The dovetail also provides several 1/4′′-20 and 3/8′′-16 threaded holes for tripod plate attachment. It can be attached to a shoulder pad for custom handheld configurations.

Shape ARRI Standard Bridgeplate and 12" Dovetail Plate with 15mm Rods

Shape SH-DPK15 (SHDPK15, SH DPK15, SH/DPK15, SH_DPK15) ARRI Standard Bridgeplate and 12" Dovetail Plate with 15mm Rods  SHAPE ARRI Standard 15mm Studio Bridge Plate & 12′′ Dovetail Plate Kit This lightweight and strong aluminum body ARRI Standard 15mm Studio Bridge Plate slides onto an ARRI Standard Dovetail Plate; it uses 15mm rods (12′′) and 15mm Studio Offset Spacing (rods spaced 100mm center to center).Additionally, the Bridge Plate is equipped with a convenient Custom Flat Screwdriver that is integrated and secured by a magnet, used to quickly tighten the 1/4′′-20 and 3/8′′-16 UNC captive screws (included) that hold the base components together. Thereis also a locking lever to lock the Bridge Plate firmly in place and a slotted design to accommodate screw spacings. The SHAPE Lightweight ARRI Standard 12′′ Dovetail Plate allows you to quickly and easily balance the weight when using front or back heavy camera equipment. It also features an easy-to-access stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. The dovetail also provides several 1/4′′-20 and 3/8′′-16 threaded holes for tripod plateattachment. It can be attached to a shoulder pad for custom handheld configurations.

Shape ARRI Standard Bridgeplate with 19mm Rods

Shape SH-DP19S (SH/DP19S, SH_DP19S, SHDP19S, SH DP19S) ARRI Standard Bridgeplate with 19mm Rods This lightweight and strong aluminum body ARRI Standard 19mm Studio Bridge Plate slides onto an ARRI Standard Dovetail Plate and uses 19mm rods (12′′) (rods spaced 104mm center to center). Additionally, the Bridge Plate is equipped with a convenient Custom Flat Screwdriver that is integrated and secured by a magnet, used to quickly tighten the 1/4′′-20 and 3/8′′-16 UNC captive screws (included) that hold the base components together. There is also a locking lever to lock the Bridge Plate firmly in place and a slotted design to accommodate screw spacings.

Shape 19mm Studio Sliding Baseplate For Sony Venice

Shape SH-VN19D (SH/VN19D, SH VN19D, SHVN19D, VN19D, sh-vn19d) 19mm Studio Sliding Baseplate For Sony Venice Build a VENICE studio rig with the SHAPE 19mm Studio Sliding Baseplate for Sony VENICE. The sliding studio bridgeplate conforms to the ARRI standard and has clamps for properly spaced 19mm studio rods for securing a lens support, follow focus, matte box, or other accessory. A pair of 12" rods is included for that purpose. Slide the bridgeplate along the included 12" ARRI-standard dovetail to achieve balance atop a tripod or other grip equipment. For finer adjustment, the riser plate also slides back and forth for camera positioning relative to the bridgeplate. Assembly tools and camera mounting screws are included inside a magnetic tool box that fits beneath the plate.

Shape 15mm Studio Sliding Baseplate For Sony Venice

Shape SH-VN15D (SH/VN15D, SH VN15D, SHVN15D, VN15D, sh-vn15d) 15mm Studio Sliding Baseplate For Sony Venice Build a VENICE studio rig with the SHAPE 15mm Studio Sliding Baseplate for Sony VENICE. The sliding studio bridgeplate conforms to the ARRI standard and has clamps for properly spaced 15mm studio rods for securing a lens support, follow focus, matte box, or other accessory. A pair of 12" rods is included for that purpose. Slide the bridgeplate along the included 12" ARRI-standard dovetail to achieve balance atop a tripod or other grip equipment. For finer adjustment, the riser plate also slides back and forth for camera positioning relative to the bridgeplate. Assembly tools and camera mounting screws are included inside a magnetic tool box that fits beneath the plate.

Shape Top Plate for Sony Venice with 15 mm LW front Rod Clamp

Shape SH-VNT15 (SH/VNT15, SH VNT15, SHVNT15, VNT15, sh-vnt15) Top Plate for Sony venice with 15mm LW front Rod Clamp The robust CNC machined aluminium Top Plate is designed to support and facilitate the handling of your Sony Venice Camera. It is secured on top of the camera using four 1/4″-20 UNC socket head cap screws. The Top Plate offers an array of 3/8″-16 UNC threaded mounting holes on the top and on both sides, including the ARRI anti-rotating system which can be used to better secure your accessories directly mounted onto the Top Plate. It also features two velcro strap attachment slots for cable management to keep cables away from the camera menu screens and buttons. The SHAPE Top Plate fits the Sony Venice original handle perfectly well and can be placed further forward for better balance. The 15mm Top Plate Rods allow you to mount the original Sony viewfinder bracket. The Top Plate can be equipped with a removable 15mm Studio Rod Clamp for Top Plate 15CTH or a 19mm Studio Rod Clamp for Top Plate 19CTH that can be mounted at the front of the Top Plate, allowing easy positioning of 15mm and 19mm rods to set the accessories at the proper height with respect to the Sony Venice camera optical center.   In addition, the original Sony Venice Camera Top Handle can be used with the SHAPE Sony Venice Top Plate for a lightweight shoulder rig solution. The SHAPE Top Plate also features a dovetail and safety pin system that reproduce the one on top of the camera body; the Allen Key must be temporarily removed to insert it into the Top Handle. The SHAPE Top Plate comes with a tool box and magnetic Allen Key which are useful for adjusting and installing the Top Plate onto the camera. 

Shape Sony FS7 Lightweight Bundle Rig

Shape SH-FS7LWBR (SH-FS7LWBR, SH-FS7LWBR, FS7LWBR, sh-fs7lwbr) Sony FS7 Lightweight Bundle Rig The Sony FS7 Lightweight Bundle Rig from SHAPE expands the accessory support of your FS7 camera by outfitting it with a 15mm rod baseplate and a top plate with 1/4"-20 and 3/8"-16 threaded holes. It also replaces the rosette arm section of the FS7's handgrip with a piece that allows for faster and easier grip position adjustments. The baseplate includes a pair of 8" long 15mm rods for attaching optional accessories such as a follow focus and matte box, and its compact design leaves access to the camera's shoulder pad open. A V-lock adapter on the underside of the baseplate allows the camera to be mounted on quick-release V-lock tripod plates. It also provides ARRI rosettes on each side for attaching the included Sony FS7 Remote Extension Handle and an optional left-sided rosette handle. The Remote Extension Handle features SHAPE's patented push-button design technology and ratcheting levers for quick and easy rotation and extension adjustment of the camera's remote handgrip. The Top Plate attaches around the FS7's top handle using a pair of supplied screws, providing 1/4"-20 and 3/8"-16 threads on top of the camera. This is useful for articulating arms to support external monitors and viewfinders, or mounting additional accessories. Sony FS7 Lightweight Plate The Sony FS7 Lightweight Plate from SHAPE is a fixed baseplate that provides 15mm LWS rod support without interfering with the camera's shoulder-mount design. A pair of 8" long 15mm rods is included for attaching optional accessories such as a follow focus and matte box. In addition to rod ports, the Lightweight Plate also features ARRI rosettes on each side for attaching the FS7's right handle and an optional left-sided rosette handle. On the underside of the baseplate is a V-lock delta adapter, allowing the baseplate to be mounted on V-lock quick-release tripod plates, such as the Panasonic SHAM-TM700 or Sony VCT14. The delta adapter is attached to a bottom door, which can be opened up to access 1/4"-20 and 3/8"-16 camera screws. Top Plate for Sony FS7 Camera Use the top surface of your FS7 camcorder to mount accessories with this Top Plate from SHAPE. With multiple 1/4"-20 and 3/8"-16 tapped holes, this top plate will accept many standard accessories from magic arms to cold shoe adapters. The U-shape of the plate allows for the original camera handle to remain mounted while the non-flush design prevents over-tightened screws from puncturing the top of the camera casing. Sony FS7 Remote Extension Handle   The Sony FS7 Remote Extension Handle from SHAPE is a replacement for the rosette arm section of the FS7's SmartGrip handle, adding SHAPE's patented push-button design technology for easy angle adjustment. It also provides a ratcheting lever for quick length adjustment of the SmartGrip's support arm.

Shape Panasonic AU-EVA1 Camera Bayonet Mount Remote Extension With Cable

Shape SH-EVACA (SH/EVACA, SH EVACA, SHEVACA, EVACA, sh-evaca) Panasonic AU-EVA1 Camera Bayonet Mount Remote Extension With Cable The Panasonic AU-EVA1 remote extension handle with Bayonet mount from SHAPE offers an adjustable arm extension for the side hand grip provided with the Panasonic AU-EVA1. The Remote Extension Handle is designed with a Bayonet Mount, allowing you to quickly attach and secure the handle to the Panasonic AU-EVA1 female adaptor camera body. It also features SHAPE's patented Push-button Technology for easy angle adjustment and 360-degree rotation. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm.

Shape Composite F3

Shape SH-COMPOF3 (SH_OMPOF3, SHCOMPOF3, SH/COMPOF3, SH COMPOF3) Composite F3 The SHAPE COMPOSITE F3 is designed to position the camera near or over the shoulder, and allows for quick adjustments and easy customizations. It is easy to set up and requires a 0.16” (4mm) hexagonal key. With various threaded holes (20.25”/51.44cm and 16.38”/41.61cm) at its base, the paparazzi riser camera platform allows for attachment of the quick release plate. The front rods of the COMPOSITE F3 allow you to attach video accessories such as a matte box, a 1.38” (35mm) lens adaptor, and a follow focus mechanism. Each handle of the COMPOSITE F3 can be individually rotated to 360° by pressing the button located at the articulation. With the release of this button, the handle stays firmly at 1 place. Made of lightweight aluminum, the components of the COMPOSITE F3 offer strength and durability. Most of the parts sport a powder coat paint with wrinkle finish and the rest of the parts are hard anodized. Designed to position the camera near the shoulder or over the shoulder Allows for quick adjustments and easy customizations Easy to set up; requires a 0.16" (4mm) hexagonal key Paparazzi riser camera platform has various threaded holes (20.25"/51.44cm and 16.38"/41.61cm) at its base, which allows for attachment of the quick release plate Front rods of the Composite F3 allow you to attach video accessories such as a matte box, a 1.38" (35mm) lens adaptor, and a follow focus mechanism Each handle of the Composite F3 can be individually rotated to 360° by pressing the button located at the articulation; with the release of this button, the handle stays firmly at one place Components are made of lightweight aluminum, which offers strength and durability Most of the parts sport a powder coat paint with wrinkle finish and the rest of the parts are hard anodized Shoulder pad and the back pad are padded for superior comfort  

Shape BLOC 15 Arri Rosette Adapter for 15mm LWS and Studio-Spaced Rods

Shape SH-BLOC1515ST (SH_BLOC1515ST, SHBLOC1515ST, SH/BLOC1515ST, SH BLOC1515ST) BLOC 15 Arri Rosette Adapter for 15mm LWS and Studio-Spaced Rods The BLOC 15 Arri Rosette Adapter for 15mm LWS and Studio-Spaced Rods from SHAPE provides a left hand and a right hand Arri rosette for the addition of hand grips and other accessories to a 15mm rod system. The adapter features both 60mm center-to-center "LWS" (light weight support) and 100mm center-to-center "Studio" spacings for compatibility with virtually any 15mm rod system (19mm rods are not supported).

Shape V-Lock Quick Release Baseplate for Blackmagic URSA mini

Shape SH-URSABP (SHURSABP, SH/URSABP, SH URSABP, URSABP, sh-ursabp) V-Lock Quick Release Baseplate for Blackmagic URSA mini The SHAPE V-Lock Quick Release Baseplate is designed specifically for the Blackmagic URSA Mini cameras. It can be used shoulder mounted, tripod mounted, or attached to V-Lock tripod adapters. The baseplate includes a removable shoulder pad and ARRI standard rosettes for installing SHAPE handles. The baseplate offers 1/4"-20 and 3/8"-16 tripod mount threads, and includes 8" and 4" rods made of hard anodized aluminum for strength and durability.

Shape Blackmagic URSA Mini Bundle Rig

Shape SH-URSABR (SH_URSABR, SHURSABR, SH/URSABR, SH URSABR) Blackmagic URSA Mini Bundle Rig Shape designed this new bundle to offer a balanced solution directly on the shoulder when using the Blackmagic URSA Mini. This kit was designed  to provide a balanced shoulder mount solution and to help you shoot for long hours with comfort. The baseplate is built sturdy and lightweight  for a perfect fit with the URSA Mini features. This solution comes with 15mm-8 inches rods and 15mm- 4 inches rods and offers two levels of adjustment for the front rods. The bundle also includes a remote extension arm enabling users to fix the Ursa mini side hand grip directly on the ARRI rosettes of the baseplate. The adjustable arm length provides great versatility and features a push-button for a 360 degree rotation. The kit also includes Shape handle grip with the patented red push-button technology.  

Shape Blackmagic URSA Mini Kit with Matte Box & Follow Focus Pro

Shape SH-URSAKIT (SH_URSAKIT, SHURSAKIT, SH/URSAKIT, SH URSAKIT) Blackmagic URSA Mini Kit with Matte Box & Follow Focus Pro The SHAPE Blackmagic URSA Mini Kit is designed to provide a balanced shoulder mount solution and to help you shoot for long hours with comfort. The baseplate is sturdy and lightweight for compatibility with the URSA Mini. This solution comes with 8" and 4" 15mm rods, and offers two levels of adjustment for the front rods. This kit also includes the SHAPE Matte Box 4x4 for optimal image quality. The ergonomic and robust SHAPE Follow Focus Pro is also a part of this bundle, allowing for quick attachment, removal, and repositioning.  The bundle includes a remote extension arm, enabling users to attach the URSA Mini side handgrip directly onto the ARRI rosettes on the baseplate. The adjustable arm length provides flexibility, and features a push button for 360° rotation. The kit also includes the SHAPE handle grip with the red push button technology. 

Shape DSLR Kirk Neff Baseplate 2.0

Shape SH-DSLRKNBPLT2.0 (SH_DSLRKNBPLT2.0, SHDSLRKNBPLT2.0, SH/DSLRKNBPLT2.0, SH DSLRKNBPLT2.0) DSLR Kirk Neff Baseplate 2.0 The DSLR Kirk Neff Baseplate 2.0 from SHAPE is a 15mm rod baseplate designed for DSLR cameras that utilizes a standard V-lock quick-release system. The quick-release plate provides a 1/4"-20 threaded camera screw and has rubber stoppers at the back to prevent your camera from twisting during operation. The rubber stoppers can be adjusted and removed using the included hex key. For alignment and balance adjustments, the V-lock delta adapter on the bottom of the quick-release plate can be also adjusted forward/backward, and the camera screw can be placed in a front or rear position - using appropriate hex keys. The baseplate itself features two 15mm rod ports with thumbscrews. It's design places the optical center of camera between the two rods and places the lens at a height suitable for use with a matte box. A pair of 8" aluminum rods come included.

Shape DSLR Kirk Neff Rig

Shape SH-DSLRKN3 (SH_DSLRKN3, SHDSLRKN3, SH/DSLRKN3, SH DSLRKN3) DSLR Kirk Neff Rig The DSLR Kirk Neff Rig from Shape is a 15mm rod, shoulder-mount solution designed for DSLR or other compact cameras. Centered around the DSLR Kirk Neff Baseplate 2.0, the bundle features a pair of 18" long 15mm rods that supports the included Quick Handle Rod Bloc and Mini Composite Shoulder Pad with Back Pad. You can also expand your rig with the addition of optional accessories such as a matte box and follow focus. The shoulder pad and handgrips can be removed for mounting the rig onto a tripod. Your camera attaches to the baseplate via a V-lock quick-release camera plate. The plate is also compatible with third party support systems that utilize the V-lock interface. The baseplate provides clamps to support one of the 15mm rod pairs, allowing you to the dual handgrips in front of the baseplate, as well as the rod offset bracket behind it. The Quick Handle Rod Bloc provides dual handgrip support and features SHAPE's push button rosette release, which allows you to adjust the angle of the handgrips without having to remove your hands from the rig. At the rear of the rig is the Mini Composite Shoulder Pad which provides padded shoulder support for the rig. It mounts onto the pair of 15mm rods extending out the back of the rod offset bracket. A Back Pad is included which attaches to the shoulder pad for augmented camera support and comfort. A 1/4"-20 hole allows for additional accessories to be added. DSLR Kirk Neff Baseplate 2.0 The DSLR Kirk Neff Baseplate 2.0 from SHAPE is a 15mm rod baseplate designed for DSLR cameras that utilizes a standard V-lock quick-release system. The quick-release plate provides a 1/4"-20 threaded camera screw and has rubber stoppers at the back to prevent your camera from twisting during operation. The rubber stoppers can be adjusted and removed using the included hex key. For alignment and balance adjustments, the V-lock delta adapter on the bottom of the quick-release plate can be also adjusted forward/backward, and the camera screw can be placed in a front or rear position - using appropriate hex keys. The baseplate itself features two 15mm rod ports with thumbscrews. It's design places the optical center of camera between the two rods and places the lens at a height suitable for use with a matte box. A pair of 8" aluminum rods come included. 15mm rod baseplate for DSLR cameras V-lock quick-release system Adjustable and removable rubber stoppers on quick-release plate prevent camera for twisting 1/4"-20 camera screw Baseplate respects DSLR optical center 8" aluminum 15mm rods included Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Quick Handle Provides professional video stabilization with 2 handles Each handle offers 360° individual rotation Offers easy attachment/removal Rod Block Composed of anodized aluminum Offers composite camera support for all 15mm rods Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob With 2 screw-threaded holes, the Rod Block provides for attachment of components Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Compatible Support Series: Composite Cameleon Sumo Spider 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps. Pair of aluminum support rods for 15mm rod clamps. 18" long rods with chamfered ends that guide the rod into an available rod clamp, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.

Shape DSLR Kirk Neff Offset Rig Bundle

Shape SH-DSLRKN1 (SH_DSLRKN1, SHDSLRKN1, SH/DSLRKN1, SH DSLRKN1) DSLR Kirk Neff Offset Rig Bundle The DSLR Kirk Neff Offset Rig Bundle from SHAPE is a 15mm rod, shoulder-mount solution designed for DSLR or other compact cameras and comes complete with a matte box and follow focus. The offset design places your camera's LCD screen in front of your eyes for easier viewing while shooting. At the heart of the bundle are the DSLR Kirk Neff Baseplate 2.0, a rod offset bracket, and a pair of 10"- and 12"-long 15mm rods. The rig, matte box, and follow focus are supported using an included shoulder pad and dual handgrips. Your camera attaches to the baseplate via a V-lock quick-release camera plate. The plate is also compatible with third party support systems that utilize the V-lock interface. The baseplate provides clamps to support one of the 15mm rod pairs, allowing you to mount the dual handgrips, matte box, and follow focus in front of the baseplate, as well as the rod offset bracket behind it. The follow focus uses a clamping mechanism to quickly attach and detached off of the rods. It features a removable white marking disc and comes with both a 0.8 pitch gear for interfacing with cine-style lenses, as well as a friction gear for use with lenses that lack built-in gear rings. To block unwanted light from hitting your lens, the matte box attaches to the rods and features a swing-away design for quick lens changes. It comes with a top flag, side flags, and provides two 4x4" rotating filter stages. The Quick Handle Rod Bloc provides dual handgrip support and features SHAPE's push button rosette release, which allows you to adjust the angle of the handgrips without having to remove your hands from the rig. At the rear of the rig is the Mini Composite Shoulder Pad which provides padded shoulder support for the rig. It mounts onto the pair of 15mm rods extending out the back of the rod offset bracket. A Back Pad is included, which attaches to the back of the shoulder pad for augmented camera support and comfort. A 1/4"-20 hole allows for additional accessories or weights to be added. DSLR Kirk Neff Baseplate 2.0 The DSLR Kirk Neff Baseplate 2.0 from SHAPE is a 15mm rod baseplate designed for DSLR cameras that utilizes a standard V-lock quick-release system. The quick-release plate provides a 1/4"-20 threaded camera screw and has rubber stoppers at the back to prevent your camera from twisting during operation. The rubber stoppers can be adjusted and removed using the included hex key. For alignment and balance adjustments, the V-lock delta adapter on the bottom of the quick-release plate can be also adjusted forward/backward, and the camera screw can be placed in a front or rear position - using appropriate hex keys. The baseplate itself features two 15mm rod ports with thumbscrews. It's design places the optical center of camera between the two rods and places the lens at a height suitable for use with a matte box. A pair of 8" aluminum rods come included. 15mm rod baseplate for DSLR cameras V-lock quick-release system Adjustable and removable rubber stoppers on quick-release plate prevent camera for twisting 1/4"-20 camera screw Baseplate respects DSLR optical center 8" aluminum 15mm rods included 2-Stage 4 x 4" Matte Box The SHAPE 2-Stage 4 x 4" Matte Box accepts lenses with up to a 100mm front outside diameter. It mounts to 15mm LWS rods and utilizes a swing-away design, which lets you perform quick lens changes without having to remove the matte box from your rods. You can adjust the height of the matte box in relation to the rods, which comes in handy when your lens center to rod center height is slightly off from the standard. Two rotating filter stages support the use of 4x4" filters. The matte box comes with a top flag (eyebrow), side flags, four matte box donuts in 66, 72, 82, and 90mm sizes, and elastic donut. The matte box has a rear opening of 100mm for lenses. The included anti-reflection donuts prevent light behind the camera from reflecting off any filters in the matte box and degrading the image. Included with the matte box are anti-reflection donuts for lenses with a front outside diameter of 66, 72, 82, and 90mm. The included elastic donut supports lenses with a front outside diameter between 66 and 90mm, and it is especially useful with lenses that grow and shrink as you change focus or zoom. The side flags incorporate a hook design as a safety feature where they attach to the matte box. This helps prevent them from falling out of the matte box should the lock-down thumbscrew loosen accidentally. The swing-away bracket incorporates a height adjustment, enabling you to compensate a total of 0.65" vertically. This allows you to use this matte box with a variety of camera/rod support combinations that may vary slightly from the industry standard 85mm distance from LWS rod center to lens port center. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Quick Handle Provides professional video stabilization with 2 handles Each handle offers 360° individual rotation Offers easy attachment/removal Rod Block Composed of anodized aluminum Offers composite camera support for all 15mm rods Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob With 2 screw-threaded holes, the Rod Block provides for attachment of components Friction & Gear Follow-Focus Clic with Adjustable Marker The Shape Friction & Gear Follow-Focus Clic with Adjustable Marker is designed to attach onto standard 15mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic atop the rods, and then slide and close a Shape-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods. The Clic's focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature -- the focus disk -- moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism, as you see in the photo above, or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from a cube-shaped gearbox that you can't see in the photo above because it sits behind the focus disk. Once the screws are off, the focus disk can just be flipped over for use with longer lens constructions. In the photo above, the white mark disk that you see to the right of the red knob is made of highly resistant Delrin thermoplastic. It can be written on with non-permanent markers to mark up focus measurements for various predetermined shots, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. The Clic is CNC machined and made of lightweight anodized aluminum for strength and durability. Designed to attach onto standard 15mm rods. Attaches onto the rods via a patented clamp system. The focus mechanism moves horizontally to adjust to the lens. The focus mechanism can be used on the left or right side of the lens. A friction wheel and a gear wheel are included to interchange as the focus disk. The focus disk flips to the rear of the focus mechanism to accommodate longer lenses. A thermoplastic mark disk can be written on with non-permanent markers and is interchangeable. An included marker attaches beside the mark disk and slides and tightens into positions along the disk. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Compatible Support Series Composite Cameleon Sumo Spider Off-Set Bracket for Blackmagic Cage The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. 15mm Aluminum Rods (Pair, 12") This pair of Shape 15mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Top Plate Extendable Handle for Select RED Cinema Cameras

Shape SH-RWTPH (SH_RWTPH, SHRWTPH, SH/RWTPH, SH RWTPH) Top Plate Extendable Handle for Select RED Cinema Cameras The Top Handle and Top Plate are designed to give you a solid and comfortable grip for the manipulation of your RED camera. The handle grip frame is made from robust CNC machined aluminium and the finger grip is made from genuine Canadian maple wood for maximum comfort. You can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your camera to your lens type. The centre of the Top Plate is designed to perfectly insert and mount the Top Handle that you can strongly attach with an Allen Key. The plate is specifically designed to be strongly attached with (4) Four 1/4-20 stainless screws at the top of the RED DSMC2, EPIC WEAPON, SCARLET WEAPON, RAVEN. All Shape products and accessories are covered by a lifetime manufacturer's warranty solely on CNC machined parts unless otherwise stated. Removable and robust top plate with ergonomic and extendable top handle Compatible with RED’s DSMC2 (MONSTRO, HELIUM, GEMINI), EPIC, SCARLET, RAVEN, DRAGON.  

Shape Pro Bundle Rig for RED WEAPON EPIC-W, SCARLET-W, and RAVEN Cameras

Shape SH-RWBR (SH_RWBR, SHRWBR, SH/RWBR, SH RWBR) Pro Bundle Rig for RED WEAPON EPIC-W, SCARLET-W, and RAVEN Cameras The perfect camera accessories for the manipulation of your RED camera. Compatible with RED’s DSMC2 (MONSTRO, HELIUM, GEMINI), RAVEN. Removable, ergonomic and robust top plate & extendable top handle with EVF mount. The Top Handle and Top Plate are designed to give you a solid and comfortable grip for the manipulation of your RED camera. The handle grip frame is made from robust CNC machined aluminium and the finger grip is made from genuine Canadian maple wood for maximum comfort. You can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your camera to your lens type. The centre of the Top Plate is designed to perfectly insert and mount the Top Handle that you can strongly attach with an Allen Key. The plate is specifically designed to be strongly attached with (4) Four 1/4-20 stainless screws at the top of the RED Weapon, RED Epic-Weapon, RED Scarlet-Weapon and RED Raven (Not compatible with the RED Dragon, Epic and Scarlet because of their bolt pattern and fan position).

Shape Complete Rig System for RED WEAPON EPIC-W, SCARLET-W, and RAVEN Cameras

Shape SH-RWKS (SH_RWKS, SHRWKS, SH/RWKS, SH RWKS) Complete Rig System for RED WEAPON EPIC-W, SCARLET-W, and RAVEN Cameras The ultimate camera support for your RED camera. Compatible with RED’s DSMC2 (MONSTRO, HELIUM, GEMINI), EPIC, SCARLET, RAVEN, DRAGON; Removable, ergonomic and robust top plate & extendable top handle with EVF mount. The Top Handle and Top Plate are designed to give you a solid and comfortable grip for the manipulation of your RED camera. The handle grip frame is made from robust CNC machined aluminium and the finger grip is made from genuine Canadian maple wood for maximum comfort. You can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your camera to your lens type. The centre of the Top Plate is designed to perfectly insert and mount the Top Handle that you can strongly attach with an Allen Key. The plate is specifically designed to be strongly attached with four 1/4-20 stainless screws at the top of the RED DSMC2, EPIC WEAPON, SCARLET WEAPON, RAVEN.

Shape 4-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw

Shape SH-RPB4A (SH_RPB4A, SHRPB4A, SH/RPB4A, SH RPB4A) 4-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw Providing push button adjustment, the SHAPE 4-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw allows you to quickly mount this accessory support arm to a 1/4"-20 threaded mounting hole. You mount your 1/4"-20 accessory to the top of the arm, which features a small mounting platform with rubberized surface. The D-ring assembly enables you to securely tighten down the screw without using tools. The arm is 6.5" long and features slotted D-rings mounting screws enabling you to either use a slotted screwdriver to tighten the screws, or finger-tighten using the D-ring. The push button adjustment allows you to tilt the mounting platform forward or backward, and another push button provides you with pan adjustment to position your accessory just how you want it. This arrangement doesn't require you to stress, strain, or worry when loosening or tightening the central lock-down arm common to most accessory arms. Additionally, each push button only controls one axis, so you don't have to worry about your arm collapsing when you make an adjustment.

Shape Revolt Sliding Dovetail Riser

Shape SH-RSDR (SHRSDR, SH/RSDR, SH RSDR, RSDR, sh-rsdr) Revolt Sliding Dovetail Riser Mount your camera to the SHAPE Revolt Sliding Dovetail Riser for precise tripod balancing and 15mm LWS accessory compatibility. The long plate design can compensate for short or long camera lengths, and it slides to further compensate for interchangeable lenses or other accessories mounted on the camera. The bottom of the baseplate has 1/4"-20 and 3/8"-16 threaded holes for compatibility with most video fluid heads. At the front, a 15mm rod clamp secures the two included rods for accessory mounting. Equipment such as follow focuses, lens supports, drive motors, and matte boxes can be attached to build up your rig. The levers on the baseplate are spring-loaded, so they can be optimally rotated for tightening and loosening bolts. Safety catches on adjustable surfaces have been implemented to prevent the camera from accidentally falling during adjustment. Sliding Plate with Locking Lever Disengage the lever at the side of the baseplate to find the center of gravity for precise balancing. Height-Adjustable Rod Clamp Adjust the height of the rod clamp to ensure that your rod-mounted accessories line up with your camera's optical center.

Shape REVOLT Bridgeplate with Sliding Dovetail Riser

Shape SH-RSB15 (SH_RSB15, SHRSB15, SH/RSB15, SH RSB15) REVOLT Bridgeplate with Sliding Dovetail Riser The REVOLT Bridgeplate from SHAPE allows you to quickly mount your camera on a tripod instead of your shoulder. It also provides a robust support to your camera rig. The bridgeplate features a sliding dovetail riser that can be directly attached to the ARRI Amira camera. An easily accessible locking lever on the side of the bridgeplate allows you to adjust and fix the camera rig's position onto the tripod. Furthermore, the included quick-release safety pins prevent the upper plate from sliding. The bridgeplate features 1/4"-20 and 3/8"-16 threaded holes at the base for tripod attachment.

Shape REVOLT VCT Universal Baseplate with Wooden Handle Grips

Shape SH-BPW14 (SH_BPW14, SHBPW14, SH/BPW14, SH BPW14) REVOLT VCT Universal Baseplate with Wooden Handle Grips When the Revolt VCT Universal Baseplate is combined with SHAPE’s Canadian maple wooden handle grips, it results in the most robust and comfortable camera support when you are shooting for long hours. Front to Back Sliding Plate Providing you with quick positioning of your camera accessories for an optimal adjustment of your camera’s centre of gravity and weight distribution. Match your camera’s optical centre Focal length is probably the most important factor when distinguishing one lens from another. Being able to adjust the height of your rod bloc to match your camera’s optical centre is exactly what you can do with the Revolt Universal Baseplate. Front and rear rod bloc Two 15 mm lightweight rod blocs can be fixed to the front and rear of the Baseplate, allowing you to install more camera accessories. Safety Pins and Ratchet knobs The Revolt VCT Universal Baseplate is built from robust components to prevent the plate from sliding, to secure the rods and to increase the strength of your rig. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The safety pins are located in strategic areas to maximize stabilization. Robust and easy to use, the safety pins prevent the upper plate from sliding. Soft & Ergonomic Shoulder Mount The shoulder Mount Support for the Revolt produces maximum comfort and stability; thanks to its gel padding, its softness and ergonomic shape, its thickness and slip-free material. Sophisticated tool box Quick access to your extra screws and Allen Key can be a time saver, even more so, when you are in the middle of a shoot. The REVOLT is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored. There is also a magnet at the back to attach your Allen Key. Compatible with the following cameras, ARRI (Amira and Alexa Mini), SONY (FS7, FS7M2, F5, F55, EX1, EX3), CANON (C300, C300M2, C700), RED SERIES, PANASONIC (Panasonic Cinema Varicam Lt 4k S35, Panasonic Ag-af100, Panasonic Ag-af101 Varicam Lt, Panasonic P2), BLACKMAGIC (Blackmagic Ursa Mini) and many other camera models with Interchangeable Lenses. Made of Canadian Maple Hardwood The wooden hand grip will give a natural touch to your rig and is designed with an ergonomic surface to add more comfort when you are shooting for long hours. The camera handgrip is made of Canadian maple hardwood and a high quality varnish top-coat to provide more durability. Push-Button System SHAPE is well known for its red push button handle, now used by so many professionals in the industry. They developed this patented technology to give users quick and easy adjustment. By simply pressing the red button, you are allowed a 360 degree rotation to place the handle in the best position for your use. Ratchet Knobs adjustments The handle offers two points of adjustment allowing 360° rotating positions for an optimal user comfort. Compatible with ARRI Rosettes Standard The Camera Handle is compatible with any camera rig with standard ARRI rosettes. Perfect to be fixed on the ARRI Alexa, the ARRI Amira cameras, or all others based on ARRI standard rosettes and screws with a red ratchet knob.

Shape REVOLT VCT Universal Baseplate with Follow Focus & Matte Box Pro Kit

Shape SH-BP15 (SH_BP15, SHBP15, SH/BP15, SH BP15) REVOLT VCT Universal Baseplate with Follow Focus & Matte Box Pro Kit  The Revolt VCT Universal baseplate offers a unique design, created for both amateur and professional filmmakers seeking camera stabilizers & supports of high quality. This bundle includes a perfect combination of SHAPE’s universal baseplate with SHAPE’s patented push button technology telescopic handles, a 2-stage matte box and a sophisticated follow focus pro system. Front to Back Sliding Plate Providing you with quick positioning of your camera accessories for an optimal adjustment of your camera’s centre of gravity and weight distribution. Match your camera’s optical centre Focal length is probably the most important factor when distinguishing one lens from another. Being able to adjust the height of your rod bloc to match your camera’s optical centre is exactly what you can do with the Revolt Universal Baseplate. Front and rear rod bloc Two 15 mm lightweight rod blocs can be fixed to the front and rear of the Baseplate, allowing you to install more camera accessories. Safety Pins and Ratchet knobs The Revolt VCT Universal Baseplate is built from robust components to prevent the plate from sliding, to secure the rods and to increase the strength of your rig. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The safety pins are located in strategic areas to maximize stabilization. Robust and easy to use, the safety pins prevent the upper plate from sliding. Soft & Ergonomic Shoulder Mount The shoulder Mount Support for the REVOLT produces maximum comfort and stability; thanks to its gel padding, its softness and ergonomic SHAPE, its thickness and slip-free material. Sophisticated tool box Quick access to your extra screws and Allen Key can be a time saver, even more so, when you are in the middle of a shoot. The REVOLT is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored. There is also a magnet at the back to attach your Allen Key. Baseplate Compatible with the following cameras, ARRI (Amira and Alexa Mini), SONY (FS7, FS7M2, F5, F55, EX1, EX3), CANON (C300, C300M2, C700), RED SERIES, PANASONIC (Panasonic Cinema Varicam Lt 4k S35, Panasonic Ag-af100, Panasonic Ag-af101 Varicam Lt, Panasonic P2), BLACKMAGIC (Blackmagic Ursa Mini) and many other camera models with Interchangeable Lenses. Telescopic Handles with Rubber Handgrips The black Telescopic Handles are left and right rubber handgrips that can be attached to cameras and camera support rig that has standard ARRI rosettes. Each arm features (4) four points of articulation: (2) Push-button system to optimize your rig support and manipulation and (2) Ratchet Knobs System allowing 360° rotating positions and 1.5" extension length to adjust the arms for your comfort. Push-Button System facilitate manipulation Each handle features two Push-button System. SHAPE is well known for its Push-button handle, now used by so many professionals in the industry. SHAPE developed this patented technology to give users quick and easy adjustment. By simply pressing the red button, you are allowed a 360 degree rotation to place the handle in the best position for your use. Ratchet Knobs adjustments Each handle features two points of adjustment allowing 360° rotating positions for an optimal user comfort. Compatible with ARRI Rosettes Standard The Camera Handle is compatible with any camera rig with standard ARRI rosettes. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. Pull focus on any type of project The Follow Focus Pro is perfect for use with film and cine-style lenses. It’s an industry workhorse and has already proven itself on countless tough shoots all over the world. Snap-on unit adaptor for 15 mm rods The Follow Focus Pro is designed with a ‘Snap-on unit adaptor for 15 mm rods’ to meet your particular camera rig requirements and adjustments. Reliable build quality. Your pictures will stay sharp Manufactured in sleek black anodized aluminium, it is made from robust CNC Machined Aluminium. SHAPE engineering is internationally renowned and the Follow Focus Pro is one of the most robust motion picture accessories ever built. The Gear Arm is reversible and two gear wheels are supplied to accommodate a wide range of lens barrel sizes 0.8 mm pitch (28 and 43 teeth aluminium gear). There is also a choice of two different focusing methods (Standard or Hard Stop) for an accurate adjustment on set. Matte Box 4X5.6 The SHAPE Matte Box 4X5.6 is a 2-Stage Matte Box designed for light control and adjustment of filters. It is compatible with various photo lenses with at least 52 mm diameter, but can also fit professional video optics with up to 114 mm front diameter. The mounting of the Matte Box is done via a ‘15 mm Clip-on rods system bracket’. There is also 360 Degrees of rotation offered by the filter holders.  

Shape REVOLT VCT Universal Baseplate with Telescopic Handles

Shape SH-BP12 (SH_BP12, SHBP12, SH/BP12, SH BP12) REVOLT VCT Universal Baseplate with Telescopic Handles The REVOLT VCT Universal Baseplate with Telescopic Handles from SHAPE is a camera support system for shoulder-mounted and handheld shooting. It includes the REVOLT VCT universal baseplate and dual telescopic handgrips with ARRI rosettes. The baseplate comes integrated with a shoulder mount, one pair of 8" standard 15mm rods, and one pair of 4" standard 15mm rods. The camera can be attached via 1/4"-20 or 3/8"-16 screws to the top plate. The sliding baseplate provides a quick positioning of your camera and accessories, for an optimal adjustment of your camera's balance center. The left and right handgrips attach to the sides of the baseplate via standard ARRI rosettes. REVOLT VCT Universal Baseplate Featuring a sliding camera plate, SHAPE's REVOLT VCT Universal Baseplate can accommodate rigs of varying sizes. Simply attach your camera via 1/4"-20 or 3/8"-16 screws to the top plate, and slide it onto the shoulder plate. Fore and aft movement allows you to balance the weight of your setup properly. Further adjustments can be made by moving the shoulder pad. The 15mm rod clamps at the front and rear of the baseplate allow you to secure 15mm accessories such as a matte box, follow focus, lens motors, lens supports, battery plates, or external recorders. Since the front rod clamp is attached to the top plate, the rod-mounted accessories don't need to be repositioned as the rig is adjusted. Additionally, handles can be mounted to the ARRI standard rosettes on either side of the plate. When not shoulder-mounted, the baseplate can be secured to a standard VCT-14 ENG quick release in a matter of seconds, saving time on set. The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center. Height-adjustable rod clamp for aligning the 15mm rods at the proper LWS height in relation to the optical axis. Front and rear rod clamps allow you to extend your rig forwards and backwards. Built-in storage areas for extra screws and the Allen wrench ensure that necessary adjustment tools are always close at hand. Safety pins and spring-loaded levers prevent the top plate from sliding unintentionally. Soft and ergonomic shoulder pad. Telescopic Handles with ARRI Rosettes (Black) The black Telescopic Handles with ARRI Rosettes from SHAPE are left and right handgrips that can be attached to cameras and camera support hardware that has standard ARRI rosettes. Each arm features three points of articulation, combined with the approximately two inches of arm extension allows you to adjust the arms for your comfort. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place without having a full 360° of rotation. Shape's unique push-button articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. A second spring-loaded locking lever along the arms allows you to extend the arms up to two inches and rotate the handgrips throughout 360°. The arms are indexed for extension and rotation, so you can quickly move between known setups. The push-button locking joint enables independent rotation throughout 360°. Spring-loaded locking levers allow you to tighten or loosen the lever even when you do not have space to turn the lever throughout the entire 360° range. The arms feature two inches of extension and are indexed every 5mm of extension. The arms can rotate through 360° and feature 30° of index markings.    

Shape REVOLT VCT Universal Baseplate

Shape SH-BP10 (SH_BP10, SHBP10, SH/BP10, SH BP10) REVOLT VCT Universal Baseplate Featuring a sliding camera plate, SHAPE's REVOLT VCT Universal Baseplate can accommodate rigs of varying sizes. Simply attach your camera via 1/4"-20 or 3/8"-16 screws to the top plate, and slide it onto the shoulder plate. Fore and aft movement allows you to balance the weight of your setup properly. Further adjustments can be made by moving the shoulder pad. The 15mm rod clamps at the front and rear of the baseplate allow you to secure 15mm accessories such as a matte box, follow focus, lens motors, lens supports, battery plates, or external recorders. Since the front rod clamp is attached to the top plate, the rod-mounted accessories don't need to be repositioned as the rig is adjusted. Additionally, handles can be mounted to the ARRI standard rosettes on either side of the plate. When not shoulder-mounted, the baseplate can be secured to a standard VCT-14 ENG quick release in a matter of seconds, saving time on set. The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center. Height-adjustable rod clamp for aligning the 15mm rods at the proper LWS height in relation to the optical axis. Front and rear rod clamps allow you to extend your rig forwards and backwards. Built-in storage areas for extra screws and the Allen wrench ensure that necessary adjustment tools are always close at hand. Safety pins and spring-loaded levers prevent the top plate from sliding unintentionally. Soft and ergonomic shoulder pad.

Shape VCT Universal Baseplate Arri Rosette

Shape SH-BPVCT (SH_BPVCT, SHBPVCT, SH/BPVCT, SH BPVCT) VCT Universal Baseplate Arri Rosette This baseplate is designed to provide balance and comfort for every camera and should be used with cameras with external viewfinders. The SHAPE VCT UNIVERSAL BASEPLATE ARRI ROSETTE features a V-lock delta adapter at the bottom of base plate, a removable Velcro shoulder pad, 1 ratchet knob to secure both rods, 15mm (8’’) rods at the front and (4’’) rods at the back, and threaded holes (1/4-20 & 3/8-16) to fix your accessories. 

Shape Quick Handle Rod Bloc and Grip Relocator Kit for Canon C Series Cameras

Shape SH-HANDCS (SHHANDCS, SH/HANDCS, SH HANDCS, HANDCS, sh-handcs) Quick Handle Rod Bloc and Grip Relocator Kit for Canon C Series Cameras This bundle combines the unique SHAPE quick handle with our exclusive Canon C series RELOCATOR cable. Perfect for benefiting from the red push-button technology with Canon C100/C300/C500 cameras. This ready to use assortment allow users to control the record trigger, menu, power on/off and several other options on the Canon C series cameras. The SHAPE rubber hand grip is made of robust and non-slip rubber, allowing the user to manipulate it with confidence and precision.   Compatible with all 15mm rod systems, placed in front of any type of camera support for the Canon C series, the SHAPE QUICK HANDLE ROD BLOC features a stainless steel locking mechanism for more durability.The user can achieve precise positioning by sliding the SHAPE QUICK HANDLE ROD BLOC along the rods and secure the handles by tightening the single red knob on the ROD BLOC. All CNC machined, high-quality aircraft grade aluminum parts are hard anodised for a resistant finish and assembled with stainless steel screws to prevent rusting.

Shape Canon C100 C300 C500 Bracket

Shape SH-HAC300 (SHHAC300, SH/HAC300, SH HAC300, HAC300, sh-hac300) Canon C100 C300 C500 Bracket The Shape C300 Bracket for the C300 Handle serves to connect Shape's C300 Handle onto a rig. The Bracket is threaded on one end for the Handle to screw on, and with the other end it mounts a rig. A screw comes included to tighten the Bracket onto the rig.

Shape Push-Button Viewfinder Mount for Canon C200 Cinema Camera

Shape SH-C2VVF (SHC2VVF, SH/C2VVF, SH C2VVF, C2VVF, sh-c2vvf) Push-Button Viewfinder Mount for Canon C200 Cinema Camera The Push-Button Viewfinder Mount from SHAPE is compatible with the Canon C200 camera. The mount is designed with an L-bracket with two ratchet knobs for quick mounting and adjustment. It features three points of articulation with SHAPE patented push-button design allowing horizontal, vertical, and transversal adjustment of your viewfinder. The viewfinder can be secured to the bracket with a captive screw, and three 1/4"-20 threaded holes provide additional mounting options.

Shape Top Handle EVF Mount for Canon C200 Camera

Shape SH-C2HVF (SH-C2HVF, SH-C2HVF, SH-C2HVF, C2HVF, sh-c2hvf) Top Handle EVF Mount for Canon C200 Camera The handle grip frame is made from robust CNC machined aluminum and the finger grip is made from genuine Canadian maple wood for maximum comfort. You can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your camera to your lens type The View Finder Bracket Arm can quickly be mounted to the Canon C200 Top Plate with the help of a Ratchet Knob. The position of the View finder can also be adjusted to your need with the  Lightweight and robust CNC machined aluminum plate designed to support and facilitate the manipulation of your Canon C200. The top plate offers an array of 1/4" and 3/8" threads which can be used to attach options around the camera, for example, our top handle and EVF mount bracket (also compatible with Canon’s C200 original top handle).

Shape Canon C200 Shoulder Mount System

Shape SH-C200SM (SHC200SM, SH/C200SM, SH C200SM, C200SM, sh-c200sm) Canon C200 Shoulder Mount System The Shoulder Mount System from SHAPE is a shoulder rig system with lightweight support (LWS) for the Canon C200 camera. It includes one B15C200 Baseplate, one HAND5 Quick Handle with Rod Block, one Mini Composite Shoulder Pad, two 15mm Aluminum Rods (18"), and one Back Pad. The Baseplate features four attachment points for securely mounting the C200. It includes a pair of 15mm rods that are 18” long and run through the length of the baseplate. The Quick Handle with Rod Block is a professional video stabilization accessory with two camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A push button located at the articulation allows for easy attachment and removal. The Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm Rod Block mount, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a lever. The Back Pad is a standard rig component included with most SHAPE camera rigs. Its design features a powder-coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. Baseplate with 15mm Rod System for Canon C200 Camera The SHAPE Baseplate is designed for use with the Canon C200 camera. It comes with a pair of 15mm rods that are 12" long through the length of the baseplate. The baseplate features three attachment points for securing your camera and tripod plate attachment via three 1/4"-20 mounting holes. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally.

Shape C200 Canon Camera Bundle Rig with Follow Focus Pro & 4 x 5.6" Matte Box

Shape SH-C2KIT (SHC2KIT, SH/C2KIT, SH C2KIT, C2KIT, sh-c2kit) C200 Canon Camera Bundle Rig with Follow Focus Pro & 4 x 5.6" Matte Box The SHAPE Canon C200 Camera Bundle Rig is a support system suitable for both handheld or shoulder-mounted shooting. It includes the BP0008 V-Lock Quick Release Baseplate with a pair each of 8" and 4" 15mm aluminum rods, the V-Lock Replacement Pad, one HAND3 Telescopic Handle for ARRI Rosette, the Two-Stage 4 x 5.6" Matte Box, and one Follow Focus Pro. The BP0008 V-Lock Quick Release Baseplate is a long-format baseplate for larger cameras like the ALEXA, F5, C300, and broadcast cameras. It can be used shoulder or tripod-mounted, or attached to V-Lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-Lock Delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures via touch fasteners. The tripod mount threads are located underneath the shoulder pad. Both 8" and 4" 15mm rods are included for the front and back. The Two-Stage 4 x 5.6" Matte Box can be used as a clip-on, or can be mounted on an industry standard 15mm rod system. The Telescopic Handle is indexed for extension and rotation, so you can quickly move between setups. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers. The rotating capability allows it to be adjusted for left and right-handed use. The arm features three points of articulation—one ratchet knob and two push button systems. A spring-loaded locking lever allows you to extend the arms up to 1.5" and rotate the handgrips throughout 360°. By simply pressing the button, you can achieve 360° rotation to place the handle in the required position for your use. The push button system on the handle articulating joint provides additional articulation near the rosette, while a second push button articulation joint allows you to rotate and precisely position the handgrips. The Follow Focus Pro is suitable for use with film and cine-style lenses. It is designed with a snap-on unit adapter for 15mm rods to meet your camera rig requirements and adjustments. The unit sports a sleek black anodized finish and is made of robust CNC Machined aluminum. The Gear Arm is reversible, and two gear wheels are supplied to accommodate a wide range of lens barrel sizes with 0.8mm pitch (28 and 43-teeth aluminum gear). There is also a choice of two different focusing methods (standard or hard stop) for accurate adjustment on the set. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. V-Lock Replacement Pad The V-Lock Replacement Pad from SHAPE is a replacement shoulder pad for the V-lock system BP6000 and  BP7000. The pad utilizes a hook-and-loop system which allows for easy attachment and removal. The additional padding provided by the strap increases user comfort and reduces strain on the shoulder. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig. 2-Stage 4 x 5.6" Matte Box The 2-Stage 4 x 5.6" Matte Box from SHAPE can be used as a clip-on matte box or can be mounted on industry-standard 15mm rod system. It is designed for light control, insertion, and adjustment of filters. It features a two-stage rotating 4 x 5.6" filter holder. The matte box accepts lenses with a front diameter up to 114mm. It comes with six step-down rings that allow you to fit lenses with an outer diameter of 52, 58, 62, 67, 72, 77, and 82mm as well. Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.

Shape Bundle Rig with Follow Focus Pro for Canon EOS C200

Shape SH-C2BRFFP (SHC2BRFFP, SH/C2BRFFP, SH C2BRFFP, C2BRFFP, sh-c2brffp) Bundle Rig with Follow Focus Pro for Canon EOS C200 The SHAPE Bundle Rig with Follow Focus Pro is a camera support system designed for the Canon EOS C200, suitable for both handheld and shoulder-mounted shooting. It includes the BP0008 V-Lock Quick Release Baseplate, one V-Lock Replacement Pad, the HAND3 Telescopic Handle for ARRI Rosette, the Follow Focus Pro, and a pair each 8" and 4" 15mm aluminum rods. The long-format V-Lock Quick Release Baseplate is designed for larger cameras like the ARRI ALEXA, Sony PMW-F5, Canon C300, and broadcast cameras. It can be used shoulder or tripod-mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock Delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. A pair each of 8" and 4" 15mm aluminum rods are included for the front and back. The Telescopic Handle is indexed for extension and rotation, so you can quickly move between known setups. The arms attach to your camera or support via an ARRI-compatible rosette with spring-loaded locking levers, allowing you to lock your arms in place without having a full 360° of rotation. The rotating capability allows it to be adjusted for left and right-handed use. The arm features three points of articulation (one ratchet knob and two push-button systems). A spring-loaded locking lever along the arms allows you to extend the arms up to 1.5" and rotate the handgrips throughout 360°. The Follow Focus Pro is suitable for use with film and cine-style lenses. It is designed with a snap-on unit adapter for 15mm rods, to meet your camera rig requirements and adjustments. The unit sports a sleek black anodized finish and is made of robust CNC Machined aluminum. The gear arm is reversible, and two gear wheels are supplied to accommodate a wide range of lens barrels with .8mm pitch—28 and 43-tooth aluminum gear. A choice of two different focusing methods (standard or hard stop) allows for accurate adjustment on the set. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. V-Lock Replacement Pad The V-Lock Replacement Pad from SHAPE is a replacement shoulder pad for the V-lock system BP6000 and  BP7000. The pad utilizes a hook-and-loop system which allows for easy attachment and removal. The additional padding provided by the strap increases user comfort and reduces strain on the shoulder. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

Shape Canon C200 Camera Bundle Rig

Shape SH-C200BR (SHC200BR, SH C200BR, SH/C200BR, C200BR, sh-c200br) Canon C200 Camera Bundle Rig The SHAPE Canon C200 Camera Bundle Rig is a support system designed for the C200 cinema camera, and can be used for shoulder-mounted as well as handheld shooting. The system includes one Canon C200 Baseplate with a shoulder mount and 15mm rod system, one C200 Adapter Plate, and one Telescopic Handle with ARRI Rosette and push button technology. The Canon C200 Baseplate features a Quick Handle Grip compatible with all standard ARRI rosettes. The Adapter Plate is designed to be mounted at the bottom of the camera and lets you quickly attach your C200 camera to the Baseplate with a shoulder mount. Made of slip-free material, the shoulder pad offers ample comfort and stability. If you want to use the tripod option, the Baseplate also includes a delta plate and can be quickly mounted onto a VCT Tripod Plate. The Rod Bloc System of the Baseplate features two ratchet knob devices to adjust the length and height of your rods. The 15mm lightweight Rod Bloc can be fixed to the C200 Baseplate, allowing you to install additional camera accessories (8” rods at the front and 4” at the back). The Adapter Plate lets you quickly attach your Canon C200 camera to the Baseplate. The position of the captive screws matches the threaded holes on the base of the camera. The Telescopic Handle is indexed for extension and rotation, so you can quickly move between known setups. The arm attaches to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arm in place without having a full 360° of rotation. The rotating capability allows it to be adjusted for left and right-handed use. The arm features three points of articulation (one ratchet knob and two push button systems). A spring-loaded locking lever along the arm allows you to extend it up to 1.5". By pressing the button, you can achieve 360° rotation to place the handle in any required position. The push button system provides additional articulation near the rosette, while a second push button articulation joint allows you to rotate and precisely position the handgrip. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

Shape Cage Handle EVF Mount for Canon C200 Camera

Shape SH-C2EVFC (SHC2EVFC, SH/C2EVFC, SH C2EVFC, C2EVFC, sh-c2evfc) Cage Handle EVF Mount for Canon C200 Camera The handle grip frame is made from robust CNC machined aluminum and the finger grip is made from genuine Canadian maple wood for maximum comfort. The Canon c200 top handle is removable and you can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your Canon C200 to your lens type. The View Finder Bracket Arm can quickly be mounted to the Canon C200 Top Plate with the help of a Ratchet Knob.The position of the View finder can also be adjusted to your need with the help of the ratchet knob system and our patented Push Button Technology (nothing to unscrew - Push, adjust, release, and then its lock).

Shape Canon C200 Cage With Top Handle

Shape SH-C2THC (SHC2THC, SH/C2THC, SH C2THC, C2THC, sh-c2thc) Canon C200 Cage With Top Handle The SHAPE C200 Cage with Top Handle features a formfitting, four-sided cage for the Canon C200 camera and a top handle that attaches to a top plate on the cage. The cage offers numerous mounting threads all around including on the bottom, and a rosette adapter on the side. The top handle provides two shoe mounts and other mounting points, and is telescopically extendable by up to 2.5".

Shape Camera Cage for Canon EOS C200

Shape SH-C200CAGE (SHC200CAGE, SH/C200CAGE, SH C200CAGE, C200CAGE, sh-c200cage) Camera Cage for Canon EOS C200 The SHAPE Camera Cage is designed for use with the Canon EOS C200 cinema camera. It is made of CNC Machined aluminum and offers several mounting points and threaded holes to attach other SHAPE parts and third-party accessories. The cage also includes an ARRI rosette on the right side for attaching the Remote Extension Handle or C200 Handle.

Shape Sony FS7M2 V-Lock Quick-Release Baseplate

Shape SH-FS72BP (SHFS72BP, SH/FS72BP, SH FS72BP, FS72BP, sh-fs72bp) Sony FS7M2 V-Lock Quick-Release Baseplate With SHAPE's Sony FS7M2 V-Lock Quick Release Baseplate you can build a 15mm LWS rig around your FS7 or FS7M2 camera. The included 15mm rods enable you to mount a matte box, follow focus, lens support or other production accessory. Since the plate is designed for the FS7, correct lens height is ensured for correct accessory clearance. A rear insert plate is included to support the raised rear portion of the FS7 body, increasing the surface area of the camera base. The mounting points on the bottom of the baseplate itself can secure to a standard VCT-14 quick release tripod plate. When not locked down, the shoulder pad provides cushioned support for handheld shooting. Touch-fastener on the shoulder pad allows easy removal for cleaning or replacement. Further handheld options can be introduced using the rosettes towards the front of the baseplate. Separately available handgrips, like the SHAPE Telescoping Handles can be secured directly to the baseplate for increased stability. Separately available 15mm rods can also be attached at the rear of the plate using the 15mm Rod Bloc (also available separately).

Shape Sony FS7 II Base Plate Top Plate Follow Focus Pro

Shape SH-FS72FFP (SHFS72FFP, SH/FS72FFP, SH FS72FFP, FS72FFP, sh-fs72ffp) Sony FS7 II Base Plate Top Plate Follow Focus Pro Gear up your Sony PXW-FS7 or PXW-FS7M2 for cinema production with this Shoulder Rig Bundle from SHAPE. Comprised of SHAPE's V-Lock Quick-Release Baseplate, a telescoping handle with SHAPE's signature rubber grip and button-press adjustments, and a Follow Focus Pro for smooth focus pulls on lenses with 0.8 MOD gearing. The baseplate is the core of the kit, allowing for 15mm LWS accessories to be mounted, and clips right into a standard VCT-14 tripod plate. When not locked into a tripod, it functions as a cushioned shoulder mount. The included telescoping handle secures to one of the baseplate's rosettes and complements the FS7's existing handgrip for additional stability when handheld. For camera-top accessories, a top cheese plate is included. It fits around the existing top handle to retain all camera functionality. The included 4" rods can be mounted at the rear of the baseplate using the included 15mm rear rod clamp. See below for more information on the individual items included in this kit. Sony FS7M2 V-Lock Quick Release Baseplate With SHAPE's Sony FS7M2 V-Lock Quick Release Baseplate you can build a 15mm LWS rig around your FS7 or FS7M2 camera. The included 15mm rods enable you to mount a matte box, follow focus, lens support or other production accessory. Since the plate is designed for the FS7, correct lens height is ensured for correct accessory clearance. A rear insert plate is included to support the raised rear portion of the FS7 body, increasing the surface area of the camera base. The mounting points on the bottom of the baseplate itself can secure to a standard VCT-14 quick release tripod plate. When not locked down, the shoulder pad provides cushioned support for handheld shooting. Touch-fastener on the shoulder pad allows easy removal for cleaning or replacement. Further handheld options can be introduced using the rosettes towards the front of the baseplate. Separately available handgrips, like the SHAPE Telescoping Handles can be secured directly to the baseplate for increased stability. Separately available 15mm rods can also be attached at the rear of the plate using the 15mm Rod Bloc (also available separately). Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig. Top Plate for Sony FS7 Camera Use the top surface of your FS7 camcorder to mount accessories with this Top Plate from SHAPE. With multiple 1/4"-20 and 3/8"-16 tapped holes, this top plate will accept many standard accessories from magic arms to cold shoe adapters. The U-shape of the plate allows for the original camera handle to remain mounted while the non-flush design prevents over-tightened screws from puncturing the top of the camera casing. 15mm Aluminum Rods (Pair, 4") This pair of Shape 15mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.

Shape Sony FS7 II Rig Baseplate and Top Plate

Shape SH-FS72BT (SHFS72BT, SH/FS72BT, SH FS72BT, FS72BT, sh-fs72bt) Sony FS7 II Rig Baseplate and Top Plate Go handheld with your FS7 camera by attaching the SHAPE Sony FS7M2 Rig Baseplate and Top Plate. The baseplate has a comfortable shoulder pad and a VCT-14 quick-release for ENG tripod plates. The included handle fits right in the rosette for extra comfort and security when handheld. Extra accessory mounting options are offered via the top plate, with tapped 1/4"-20 and 3/8"-16 threads, great for articulating arms. For mounting batteries or other rod-based accessories at the rear of the camera, a rear rod block is included for securing 15mm rods. See below for more information on the items included in this kit. Sony FS7M2 V-Lock Quick Release Baseplate With SHAPE's Sony FS7M2 V-Lock Quick Release Baseplate you can build a 15mm LWS rig around your FS7 or FS7M2 camera. The included 15mm rods enable you to mount a matte box, follow focus, lens support or other production accessory. Since the plate is designed for the FS7, correct lens height is ensured for correct accessory clearance. A rear insert plate is included to support the raised rear portion of the FS7 body, increasing the surface area of the camera base. The mounting points on the bottom of the baseplate itself can secure to a standard VCT-14 quick release tripod plate. When not locked down, the shoulder pad provides cushioned support for handheld shooting. Touch-fastener on the shoulder pad allows easy removal for cleaning or replacement. Further handheld options can be introduced using the rosettes towards the front of the baseplate. Separately available handgrips, like the SHAPE Telescoping Handles can be secured directly to the baseplate for increased stability. Separately available 15mm rods can also be attached at the rear of the plate using the 15mm Rod Bloc (also available separately). Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig. 15mm Aluminum Rods (Pair, 4") This pair of Shape 15mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Top Plate for Sony FS7 Camera Use the top surface of your FS7 camcorder to mount accessories with this Top Plate from SHAPE. With multiple 1/4"-20 and 3/8"-16 tapped holes, this top plate will accept many standard accessories from magic arms to cold shoe adapters. The U-shape of the plate allows for the original camera handle to remain mounted while the non-flush design prevents over-tightened screws from puncturing the top of the camera casing.

Shape Sony FS7 Lightweight Plate and Top Plate

Shape SH-FS7LWTP (SHFS7LWTP, SH/FS7LWTP, SH FS7LWTP, FS7LWTP, sh-fs7lwtp) Sony FS7 Lightweight Plate and Top Plate The Sony FS7 Lightweight Plate and Top Plate from SHAPE expands the accessory support of your FS7 camera by outfitting it with a 15mm rod baseplate and a top plate with 1/4"-20 and 3/8"-16 threaded holes. The baseplate includes a pair of 8"-long 15mm rods for attaching optional accessories such as a follow focus and matte box, and its compact design leaves access to the camera's shoulder pad open. The baseplate also provides ARRI rosettes on each side for attaching the FS7's right handle and an optional left-sided rosette handle. A V-lock adapter on the underside of the baseplate allows the camera to be mounted on quick-release V-lock tripod plates. The Top Plate attaches around the FS7's top handle using a pair of supplied screws, providing 1/4"-20 and 3/8"-16 threads on top of the camera. This is useful for articulating arms to support external monitors and viewfinders, or mounting additional accessories. Sony FS7 Lightweight Plate The Sony FS7 Lightweight Plate from SHAPE is a fixed baseplate that provides 15mm LWS rod support without interfering with the camera's shoulder-mount design. A pair of 8" long 15mm rods is included for attaching optional accessories such as a follow focus and matte box. In addition to rod ports, the Lightweight Plate also features ARRI rosettes on each side for attaching the FS7's right handle and an optional left-sided rosette handle. On the underside of the baseplate is a V-lock delta adapter, allowing the baseplate to be mounted on V-lock quick-release tripod plates, such as the Panasonic SHAM-TM700 or Sony VCT14. The delta adapter is attached to a bottom door, which can be opened up to access 1/4"-20 and 3/8"-16 camera screws. Top Plate for Sony FS7 Camera Use the top surface of your FS7 camcorder to mount accessories with this Top Plate from SHAPE. With multiple 1/4"-20 and 3/8"-16 tapped holes, this top plate will accept many standard accessories from magic arms to cold shoe adapters. The U-shape of the plate allows for the original camera handle to remain mounted while the non-flush design prevents over-tightened screws from puncturing the top of the camera casing.

Shape Remote Extension Handle for Sony FS5 Camera

Shape SH-FS5RH (SHFS5RH, SH/FS5RH, SH FS5RH, FS5RH, sh-fs5rh) Remote Extension Handle for Sony FS5 Camera The Remote Extension Handle for Sony FS5/FS5M2 Camera from SHAPE is a variable-length adjustable handle designed to reposition the FS5 or FS5M2's remote grip away from the camera while retaining full remote functionality. The handle easily mounts to the FS5/FS5M2 using an ARRI style rosette connection and knob screw on one side, and a native Sony grip connection on the other. An included male to female LANC extension cable connects the remote grip to the camera body, maintaining full functionality after relocation. The arm itself features SHAPE's patented push-button release which allows the joint to be rotated a full 360° to any required angle. Compact for both storage and travel, the arm measures just 5.6" when folded and may be increased to a maximum length of 11" for use. A length adjustment range of 2" is also provided to the user for a more customized and comfortable fit.

Shape Viewfinder Solution for Sony FS5 Top Plate

Shape SH-FS5VF (SHFS5VF, SH/FS5VF, SH FS5VF, FS5VF, sh-fs5vf) Viewfinder Solution for Sony FS5 Top Plate To complete your setup of the top plate (FS5TP), we designed 2 rod clamps that can be mounted on the top plate for accessory options. We also designed a screen mount adapter to place on the rod so you can adjust the SONY LCD screen closer or farther away, according to your viewing needs.  The distance between the 2 rod clamps is standard 15mm LW system and the rods are positioned for the optical centre of the camera. Included with the rod clamps are a pair of 15mm 8inch rods. It’s perfect for drone and gimbal application, and is designed with a lightweight system for mounting any standard 15 mm accessories.

Shape Two-Part Top Plate Kit for Sony FS5 Camera

Shape SH-FS5TPKIT (SHFS5TPKIT, SH/FS5TPKIT, SH FS5TPKIT, FS5TPKIT, sh-fs5tpkit) Two-Part Top Plate Kit for Sony FS5 Camera For the top of the camera, we designed a two-part top plate. The plates include ¼-20 and 3/8-16 threaded holes for accessory attachment. We also designed a screen mount adapter with a rod clamp so you can adjust the SONY LCD screen closer or farther away, according to your viewing needs. You can place the screen in front, behind, at the left of the right of the camera. The rod clamp can be rotated 90 degrees for other rigging options. An additional rod clamp with a rod is included with the top plates and can be installed on the other side of the camera to attach other accessories. The distance between the 2 rod clamps is standard 15mm and the rods are positioned for the optical centre of the camera. We created the top plates to provide an easy access to the sensor reference pin. It’s very lightweight (70 g). Another feature of the top plate is that it can be installed on one side only if required as it comes in parts separated parts. The top plate includes 15mm 8inch rods. It’s perfect for drone and gimbal application, and it’s designed with lightweight system for mounting any standard 15 mm accessories. We proudly make our products in Canada, and we offer a lifetime warranty on all CNC machined parts. Our products are solid and durable.

Shape Bundle Rig and Follow Focus Pro Kit for Sony FS5 Camera

Shape SH-FS5BRFFP (SHFS5BRFFP, SH/FS5BRFFP, SH FS5BRFFP, FS5BRFFP, sh-fs5brffp) Bundle Rig and Follow Focus Pro Kit for Sony FS5 Camera The SHAPE Bundle Rig and Follow Focus Pro Kit comes with a baseplate, a Quick Handle Rod Block, a Mini Composite Shoulder Pad, a Composite Shoulder Pad, Follow Focus Pro, and 8" 15mm aluminum rods for use with the Sony PXW-FS5 or FS5M2 camera. The baseplate comes with rubber pads at the top so the FS5/FS5M2 doesn't sit directly on the aluminum. The baseplate fits 15mm standard rods which are secured with a red ratchet knob screw. A pair of 10" 15mm rods is included. It is ideal for drone and gimbal applications, and is designed with a lightweight system for mounting any standard 15mm accessories. The Quick Handle Rod Bloc is a professional video stabilization accessory with two camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. The Mini Composite Shoulder Pad is a padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm mount SHAPE Rod Bloc, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a lever. The Composite Shoulder Pad is a component of the SHAPE F3 Composite Support Rig, and is intended for use with larger sized cameras. The Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter its diameter. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and repositioning. Two 0.8 pitch gears come included and give you a choice of either 28 or 43 teeth, depending on the throw distance of the lens. The 8" 15mm aluminum rods connect to and extend your camera rig, allowing you to add various SHAPE and third-party compatible accessories. Baseplate for Sony FS5 and FS5M2 Cameras The SHAPE Baseplate comes with rubber pads at the top so the Sony PXW-FS5 or PXW-FS5M2 camera doesn't sit directly on the aluminum. The baseplate fits 15mm standard rods, which are secured with a red ratchet knob screw. A pair of 10" 15mm rods is included. The baseplate is ideal for drone and gimbal applications, and is designed with a lightweight system for mounting standard 15mm accessories. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks. 15mm Aluminum Rods (Pair, 8") This pair of Shape 15mm Aluminum Rods (8") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Sony FS5 Baseplate V-Lock Quick Release with Metabones Support

Shape SH-FS5BP (SH-FS5BP, SH-FS5BP, SH-FS5BP, FS5BP, sh-fs5bp) Sony FS5 Baseplate V-Lock Quick Release with Metabones Support The Sony FS5/FS5M2 Baseplate V-Lock Quick Release from SHAPE offers a lightweight and balanced solution on the shoulder. This baseplate features the BP0008 V-Lock Quick Release specifically adapted for the Sony FS5 and FS5M2 cameras. Its versatility allows you to adjust the front bracket's height easily, and switch the front rod bracket from 15mm lightweight to 15mm studio. It comes with a Metabones adapter plate in the front with a 3mm vertical adjustment for support. The FS5 Metabones adapter is suited to support weight and reduce stress on the camera lens mount. The ergonomic design is specifically made to help you shoot for long hours; providing comfort and balance. Made of solid anodized aluminum, the SHAPE BP0008 is a suitable fit for your Sony FS5 or FS5M2.

Shape Sony FS5 Bundle Rig With Metabones & Follow Focus Pro

Shape SH-FS5BASEFFP (SHFS5BASEFFP, SH/FS5BASEFFP, SH FS5BASEFFP, FS5BASEFFP, sh-fs5baseffp) Sony FS5 Bundle Rig With Metabones & Follow Focus Pro The Sony FS5/FS5M2 Baseplate Bundle Rig from SHAPE includes the BP0008 V-Lock Quick Release Baseplate, Follow Focus Pro, Telescopic Handle for ARRI Rosette, and the Sony PXW-FS5/FS5M2 Adapter Plate. The BP0008 V-Lock Quick Release Baseplate is a long-format baseplate for larger cameras like the ALEXA, F5, C300, and broadcast cameras. It can be used shoulder-mounted, tripod-mounted, or attached to V-Lock tripod adapters. The Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, regardless of the diameter. The unit snaps onto the rods, allowing for quick attachment, removal, and repositioning. The Telescopic Handle for ARRI Rosette is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles, to best meet your needs and preference. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig. Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

Shape Sony FS5 Bundle Rig With Metabones Adapter

Shape SH-FS5BR (SHFS5BR, SH/FS5BR, SH FS5BR, FS5BR, sh-fs5br) Sony FS5 Bundle Rig With Metabones Adapter The Sony FS5 Baseplate Bundle Rig from SHAPE includes the BP0008 V-Lock Quick Release Baseplate with 8" and 4" 15mm rods, the Telescopic Handle for ARRI Rosette, and the Sony PXW-FS5 Adapter Plate. The BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the ALEXA F5, Canon C300, and broadcast cameras. It can be used shoulder-mounted, tripod-mounted, or attached to V-Lock tripod adapters. The baseplate includes a pair each of 15mm 8" and 4" rods which extend your camera rig and let you add various SHAPE and third-party accessories. The Telescopic Handle for ARRI Rosette is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles, to best meet your needs and preference. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

Shape Baseplate Kit for Sony FS5 Camera

Shape SH-FS5BASEKIT (SHFS5BASEKIT, SH/FS5BASEKIT, SH FS5BASEKIT, FS5BASEKIT, sh-fs5basekit) Baseplate Kit for Sony FS5 Camera The SHAPE Baseplate Kit comes with a baseplate, a Two-Part Top Plate Kit, a remote extension handle, a pair of 8" aluminum rods, and a pair of 10" rods. The baseplate comes with rubber pads at the top so your Sony PXW-FS5 or FS5M2 camera doesn't sit directly on the aluminum. The baseplate fits 15mm standard rods, and the rods are secured with a red ratchet knob screw. The baseplate includes a pair of 15mm 10" rods. The Two-Part Top Plate includes 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The remote extension handle is fixed with a standard ARRI rosette that you can install on the camera. The handle is then secured with a ratchet knob screw on the rosette. The remote extension handle includes the red push button technology that allows the handle 360° of rotation. The 8" and 10" aluminum rods connect to your camera rig, extending it and letting you add various SHAPE and third-party compatible accessories. Baseplate for Sony FS5 and FS5M2 Cameras The SHAPE Baseplate comes with rubber pads at the top so the Sony PXW-FS5 or PXW-FS5M2 camera doesn't sit directly on the aluminum. The baseplate fits 15mm standard rods, which are secured with a red ratchet knob screw. A pair of 10" 15mm rods is included. The baseplate is ideal for drone and gimbal applications, and is designed with a lightweight system for mounting standard 15mm accessories. Remote Extension Handle for Sony FS5/FS5M2 Camera The Remote Extension Handle for Sony FS5/FS5M2 Camera from SHAPE is a variable-length adjustable handle designed to reposition the FS5 or FS5M2's remote grip away from the camera while retaining full remote functionality. The handle easily mounts to the FS5/FS5M2 using an ARRI style rosette connection and knob screw on one side, and a native Sony grip connection on the other. An included male to female LANC extension cable connects the remote grip to the camera body, maintaining full functionality after relocation. The arm itself features SHAPE's patented push-button release which allows the joint to be rotated a full 360° to any required angle. Compact for both storage and travel, the arm measures just 5.6" when folded and may be increased to a maximum length of 11" for use. A length adjustment range of 2" is also provided to the user for a more customized and comfortable fit. 15mm Aluminum Rods (Pair, 8") This pair of Shape 15mm Aluminum Rods (8") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Shoulder Mount Kit with Matte Box and Follow Focus for Sony a7R III

Shape SH-A73SMKIT (SHA73SMKIT, SH/A73SMKIT, SH A73SMKIT, A73SMKIT, sh-a73smkit) Shoulder Mount Kit with Matte Box and Follow Focus for Sony a7R III The Shoulder Mount Kit with Matte Box and Follow Focus from SHAPE includes the components necessary for protecting and mounting the Sony a7R III or a7 III camera. Included in this kit is a formfitting ergonomic cage which protects the camera and features a horizontal 15mm rod clamp on both sides. It provides access to all controls and ports, as well as multiple attachment points for accessories. Included in the kit are a wooden push-button top handle with 15mm LW clamp, a quick release Delta rod base system, a Metabones adapter support bracket, a pair of 18" 15mm rods, a Quick Handle Rod Bloc, a mini composite shoulder pad and back pad, a follow focus friction and gear clic system with adjustable marker, and a 4 x 4" matte box. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Friction & Gear Follow-Focus Clic with Adjustable Marker The Shape Friction & Gear Follow-Focus Clic with Adjustable Marker is designed to attach onto standard 15mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic atop the rods, and then slide and close a Shape-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods. The Clic's focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature -- the focus disk -- moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism, as you see in the photo above, or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from a cube-shaped gearbox that you can't see in the photo above because it sits behind the focus disk. Once the screws are off, the focus disk can just be flipped over for use with longer lens constructions. In the photo above, the white mark disk that you see to the right of the red knob is made of highly resistant Delrin thermoplastic. It can be written on with non-permanent markers to mark up focus measurements for various predetermined shots, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. 2-Stage 4 x 4" Matte Box The SHAPE 2-Stage 4 x 4" Matte Box accepts lenses with up to a 100mm front outside diameter. It mounts to 15mm LWS rods and utilizes a swing-away design, which lets you perform quick lens changes without having to remove the matte box from your rods. You can adjust the height of the matte box in relation to the rods, which comes in handy when your lens center to rod center height is slightly off from the standard. Two rotating filter stages support the use of 4x4" filters. The matte box comes with a top flag (eyebrow), side flags, four matte box donuts in 66, 72, 82, and 90mm sizes, and elastic donut.

Shape Cage Kit with Matte Box & Follow Focus for Sony a7R III

Shape SH-A73KIT (SHA73KIT, SH/A73KIT, SH A73KIT, A73KIT, sh-a73kit) Cage Kit with Matte Box & Follow Focus for Sony a7R III The Cage Kit for Sony a7R III/a7 III from SHAPE includes the components necessary for protecting and mounting the a7R III or a7 III camera. Included in this kit is a formfitting protective cage which features a horizontal 15mm rod clamp on both sides. It provides access to all controls and ports, as well as multiple attachment points for accessories. Also included are a push-button wooden top handle with 15mm LW clamp, a quick release Delta rod base system, a Metabones adapter support bracket, a pair of 10" 15mm rods, a follow focus friction and gear clic with adjustable marker, and a 4 x 4" matte box. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. Off-Set Bracket for Blackmagic Cage The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Friction & Gear Follow-Focus Clic with Adjustable Marker The Shape Friction & Gear Follow-Focus Clic with Adjustable Marker is designed to attach onto standard 15mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic atop the rods, and then slide and close a Shape-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods. The Clic's focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature -- the focus disk -- moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism, as you see in the photo above, or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from a cube-shaped gearbox that you can't see in the photo above because it sits behind the focus disk. Once the screws are off, the focus disk can just be flipped over for use with longer lens constructions. In the photo above, the white mark disk that you see to the right of the red knob is made of highly resistant Delrin thermoplastic. It can be written on with non-permanent markers to mark up focus measurements for various predetermined shots, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. 2-Stage 4 x 4" Matte Box The SHAPE 2-Stage 4 x 4" Matte Box accepts lenses with up to a 100mm front outside diameter. It mounts to 15mm LWS rods and utilizes a swing-away design, which lets you perform quick lens changes without having to remove the matte box from your rods. You can adjust the height of the matte box in relation to the rods, which comes in handy when your lens center to rod center height is slightly off from the standard. Two rotating filter stages support the use of 4x4" filters. The matte box comes with a top flag (eyebrow), side flags, four matte box donuts in 66, 72, 82, and 90mm sizes, and elastic donut.

Shape Offset Shoulder Mount Kit for Sony a7R III

Shape SH-A73SM-OF (SHA73SM-OF, SH/A73SM-OF, SH A73SM-OF, A73SM-OF, sh-a73sm-of) Offset Shoulder Mount Kit for Sony a7R III The Offset Shoulder Mount Kit for Sony a7R III/a7 III from SHAPE includes the components necessary for protecting and mounting the Sony a7R III or a7 III camera on your shoulder. Included in this kit is a formfitting ergonomic cage which protects the camera and features a horizontal 15mm rod clamp on either side. It provides access to all controls and ports, as well as multiple attachment points for accessories. Included in the kit are a push-button wooden top handle with 15mm LW clamp, a quick release Delta rod base system, a Metabones adapter support bracket, an offset rail Rod Bloc, a pair each of 10" and 12" 15mm rods, a quick handle Rod Bloc, a mini composite shoulder pad, and a back pad. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. Off-Set Bracket for Blackmagic Cage The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. 15mm Aluminum Rods (Pair, 12") This pair of Shape 15mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally.

Shape Shoulder Mount Kit for Sony a7R III Camera

Shape SH-A73SM (SHA73SM, SH/A73SM, SH A73SM, A73SM, sh-a73sm) Shoulder Mount Kit for Sony a7R III Camera The Shoulder Mount Kit from SHAPE includes the components necessary for protecting and mounting the Sony a7R III or a7 III camera. Included in this kit is a protective, formfitting ergonomic cage with a horizontal 15mm rod clamp on both sides. It provides access to all camera controls and ports, as well as multiple attachment points for accessories. Included in the kit are a push-button wooden top handle with 15mm LW clamp, a quick release Delta rod base system, a Metabones adapter support bracket, a pair of 18" 15mm rods, a quick handle Rod Bloc, a Mini Composite shoulder pad, and a back pad. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally.

Shape Handheld Cage for Sony a7R III

Shape SH-A73CHH (SHA73CHH, SH/A73CHH, SH A73CHH, A73CHH, sh-a73chh) Handheld Cage for Sony a7R III The Handheld Cage from SHAPE is designed to be used with the Sony a7R III or a7 III camera. It includes the Sony a7R III/a7 III formfitting ergonomic cage, which protects the camera and features a horizontal 15mm rod clamp at either side. It provides access to all controls and ports, as well as multiple attachment points for accessories. Mini push-button wooden side handles with padded straps are included as well. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations.

Shape Sony A7 III Series Cage 15 mm Rod System

Shape SH-A73ROD (SHA73ROD, SH/A73ROD, SH A73ROD, A73ROD, sh-a73rod) Sony A7 III Series Cage 15 mm Rod System The 15mm Rod System for Sony a7R III/a7 III from SHAPE is a kit that includes a formfitting protective cage which features a horizontal 15mm rod clamp on both sides. Access to all controls and ports is provided as well as multiple attachment points for accessories. Also included in this kit are a wooden push-button top handle with 15mm LW clamp, a quick release rod base system, a Metabones adapter support bracket, and two 10" 15mm rods. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

Shape Cage with DSLR Top Handle for Sony a7R III

Shape SH-A73DSH (SHA73DSH, SH/A73DSH, SH A73DSH, A73DSH, sh-a73dsh) Cage with DSLR Top Handle for Sony a7R III The Cage with DSLR Top Handle from SHAPE is designed to be used with the Sony a7R III or a7 III camera. It includes the Sony a7R III/a7 III formfitting ergonomic cage which features a horizontal 15mm rod clamp on both sides. It provides access to all controls and ports, as well as multiple attachment points for accessories. The included DSLR handle with two cold shoes and fifteen 1/4"-20 mounting threads can be mounted either at the front or back of the cage. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. Top Handle Cold Shoe for DSLR Camera The SHAPE Top Handle Cold Shoe for DSLR Camera is CNC machined from aluminum and features a wooden finger grip made from Canadian maple. The handle mounts onto the shoe of your camera or cage and can be inserted to face forward or rearward. It incorporates a total of 15 1/4"-20 threaded mounting holes and two cold shoe mounts, one at the front of the handle and one at the back.

Shape Panasonic AU-EVA1 Camera Bundle Rig with Follow Focus Pro and 4 x 5.6" Matte Box

Shape SH-EVAKIT (SHEVAKIT, SH/EVAKIT, SH EVAKIT, EVAKIT, sh-evakit) Panasonic AU-EVA1 Camera Bundle Rig with Follow Focus Pro and 4 x 5.6" Matte Box The V-lock quick release baseplate is designed for larger cameras like the ALEXA, F5, C300, and broadcast cameras. It can be used tripod or shoulder-mounted, or attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads, and a V-lock Delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. Both 8" and 4" 15mm rods are included for the front and back. The two-stage 4x5.6" matte box can be used as a clip-on or can be mounted on industry-standard 15mm rod systems. The telescopic handle is indexed for extension and rotation, so you can quickly move between known setups. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place without having a full 360° of rotation. The rotating capability allows it to be adjusted for left and right-handed use. The arm features three points of articulation—one ratchet knob and two push button systems. A spring-loaded locking lever along the arms allows you to extend the arms up to 1.5". By pressing the button, you can achieve 360° rotation to place the handle in the required position. The push button system on the handle's joint provides additional articulation near the rosette, while a second push button articulation joint allows you to rotate and precisely position the handgrips. The Follow Focus Pro is suitable for use with film and cine-style lenses. It is designed with a snap-on unit adapter for 15mm rods, to meet your camera rig requirements and adjustments. The unit sports a sleek black anodized finish and is made of robust CNC Machined aluminum. The Gear Arm is reversible, and two gear wheels are supplied to accommodate a wide range of lens barrels with .8mm pitch—28 and 43-tooth aluminum gear. A choice of two different focusing methods (standard or hard stop) allows for accurate adjustment on the set.

Shape Bundle Rig for Panasonic AU-EVA1

Shape SH-EVABR (SHEVABR, SH/EVABR, SH EVABR, EVABR, sh-evabr) Bundle Rig for Panasonic AU-EVA1 The SHAPE Bundle Rig for Panasonic AU-EVA1 is a camera support system designed for the AU-EVA1 and suitable for handheld or shoulder-mounted shooting. It includes the BP0008 V-Lock Quick Release Baseplate with 8" and 4" 15mm rod pairs, the V-Lock Replacement Pad, and the HAND3 Telescopic Handle for ARRI rosette. The V-Lock Quick Release Baseplate is a long-format baseplate for larger cameras like the ARRI ALEXA, Sony PMW-F5, Canon C300, and broadcast cameras. It can be used shoulder or tripod-mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock Delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. A pair each of 8" and 4" 15mm aluminum rods are included for the front and back. The telescopic handle is indexed for extension and rotation, so you can quickly move between known setups. The arms attach to your camera or support via an ARRI-compatible rosette with spring-loaded locking levers, allowing you to lock your arms in place without having a full 360° of rotation. The rotating capability allows it to be adjusted for left and right-handed use. The arm features three points of articulation (one ratchet knob and two push-button systems). A spring-loaded locking lever along the arms allows you to extend the arms up to 1.5" and rotate the handgrips throughout 360°. By simply pressing the button, you can achieve 360° rotation to place the handle in the required position. The push button system on the handle's articulation joint provides additional articulation near the rosette, while a second push button articulation joint allows you to rotate and precisely position the handgrips.

Shape 15mm LW Handle EVF Mount for Panasonic AU-EVA1 Camera

Shape SH-EVALWBT (SHEVALWBT, SH/EVALWBT, SH EVALWBT, EVALWBT, sh-evalwbt) 15mm LW Handle EVF Mount for Panasonic AU-EVA1 Camera Shape designed this bundle rig specifically for the Panasonic AU-EVA1 camera. It's a robust and complete solution that will increase the level of control on set. Extendable Top Handle and View Finder Bracket Arm with Push-button: The handle grip frame is made from robust CNC machined aluminium and the finger grip is made from genuine Canadian maple wood for maximum comfort. The Panasonic AU-EVA1 top handle is removable and you can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your Panasonic AU-EVA1 to your lens type. The View Finder Bracket Arm can quickly be mounted to the Panasonic AU-EVA1 Top Plate with the help of a Ratchet Knob. The position of the View finder can also be adjusted to your need with the help of the ratchet knob system and our patented Push Button Technology (nothing to unscrew - Push, adjust, release, and then its lock).

Shape ENG-Style Camcorder Bundle Rig

Shape SH-ENGBR (SHENGBR, SH/ENGBR, SH ENGBR, ENGBR, sh-engbr) ENG-Style Camcorder Bundle Rig The ENG Style Camcorder Bundle Rig from SHAPE allows additional support for small Sony and Canon camcorders. Thanks to the rubber sticker on the top of the plate, your camera won't move when correctly positioned. The Delta plate on the bottom front of this plate and the rear catch hook allow you to quickly mount and dismount your camcorder from a tripod adapter. You can also attach additional accessories, like portable lights and microphone systems, thanks to the 3/8"-16 and 1/4"-20 threaded holes on the sides. SHAPE's Paparazzi handle allows the user to attach various accessories, and use it for different applications. SHAPE's multipurpose cheese plate is included in the bundle to offer additional attachment options, such as a battery plate. The rig allows you to position your camera in the same axis as your shoulder. The offset bracket can be added to this package for an offset configuration..

Shape ENG Style Camcorder Offset Rig

Shape SH-ENGOFF (SHENGOFF, SH/ENGOFF, SH ENGOFF, ENGOFF, sh-engoff) ENG Style Camcorder Offset Rig This ENG Style Camcorder Offset Rig Baseplate from SHAPE allows additional support for small Sony and Canon camcorders. Thanks to the rubber sticker on the top of the plate, your camera won't move when correctly positioned. The Delta plate on the bottom front of this plate and the rear catch hook allow you to quickly mount and dismount your camcorder from a tripod adapter. Also, you can attach additional accessories like portable lights and microphone systems, thanks to the 3/8"-16 and 1/4"-20 threaded holes on the sides. SHAPE's Paparazzi handle can be added to use the system for different applications. The rig allows you to position your camera in front of your eyes, while supporting it with your shoulder.

Shape ENG Style Camcorder Shoulder Mount Baseplate

Shape SH-ENGSM (SHENGSM, SH/ENGSM, SH ENGSM, ENGSM, sh-engsm) ENG Style Camcorder Shoulder Mount Baseplate This ENG Style Camcorder Shoulder Mount Baseplate from SHAPE supports small Sony and Canon camcorders. Thanks to the rubber sticker on top of the plate, your camera won't move when correctly positioned. The Delta plate on the bottom front of this plate and the rear catch hook allow you to quickly mount and dismount your camcorder from a tripod adapter. Also, you can attach additional accessories, like portable lights and microphone systems, thanks to its 3/8"-16 and 1/4"-20 threaded holes on the sides. Finally, this product can be paired with a SHAPE shoulder pad and a dedicated offset bracket to transform it into a complete support system and even more, a SHAPE Paparazzi handle can be added to use the system for different applications. The rig allows you to position your camera in front of your eyes, while supporting it with your shoulder.

Shape ENG-Style Camcorder Baseplate

Shape SH-ENGBP (SHENGBP, SH/ENGBP, SH ENGBP, ENGBP, sh-engbp) ENG-Style Camcorder Baseplate The ENG-Style Camcorder Baseplate from SHAPE allows additional support for small Sony and Canon camcorders. Thanks to the rubber on the top of the plate, your camera won't move when correctly positioned. The delta plate on the bottom front of this plate and the rear catch hook will allow you to quickly mount and dismount your camcorder from a Tripod Adapter. Also, you can attach additional accessories like portable lights and microphone systems thanks to its 3/8"-16 and 1/4"-20 threaded holes on the sides. Finally, this product can be paired with a SHAPE shoulder pad and a dedicated offset bracket to transform it into a complete support system and even more, a SHAPE Paparazzi handle can be added to use the system for different applications. The rig allows you to position your camera in front of your eyes, while supporting it with your shoulder.

Shape Remote Extension Handle for Sony PXW-FS7M2/FS7 Camera System

Shape SH-FS72RH (SHFS72RH, SH/FS72RH, SH FS72RH, FS72RH, sh-fs72rh) Remote Extension Handle for Sony PXW-FS7M2/FS7 Camera System The SONY FS7M2‘s handle features a different and more efficient design. In reaction to this change, we've decided to craft the SHAPE FS7M2 SERIES to optimize the manipulation of this camera. If you own a Sony FS7M2, this is THE accessory you need. Compatible with ARRI rosettes, it's designed with our unique red push-button technology. Just one push with your thumb and you can rotate the handle on 360 degrees angle. You can put down your camera easily on a table or any surface. Also, after the installation, no tools are required! With this accessory, you will save time and it will make your work simpler! Try it once, you will agree!

Shape Sony FS5 Shoulder Mount

Shape SH-FS5SM (SHFS5SM, SH/FS5SM, SH FS5SM, FS5SM, sh-fs5sm) Sony FS5 Shoulder Mount Optimized for the Sony FS5 and FS5M2 cameras, this Shoulder Mount Kit from SHAPE will make a great camera even better by providing an ergonomic solution to run-and-gun shooting. It features a dedicated baseplate with 18" 15mm rods which will mount the quick handle, the mini composite shoulder pad, and back pad with ease, as well as other assorted accessories. The baseplate also sports rubber pads to cushion the camera, and the system has tripod mounting threads on the base. Additionally, the rig is constructed from CNC Machined aluminum and features several 1/4"-20 and 3/8"-16 threads for mounting devices. Baseplate for Sony FS5 and FS5M2 Cameras The SHAPE Baseplate comes with rubber pads at the top so the Sony PXW-FS5 or PXW-FS5M2 camera doesn't sit directly on the aluminum. The baseplate fits 15mm standard rods, which are secured with a red ratchet knob screw. A pair of 10" 15mm rods is included. The baseplate is ideal for drone and gimbal applications, and is designed with a lightweight system for mounting standard 15mm accessories. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps.

Shape Sony FS7 Lightweight Plate

Shape SH-FS7LW (SHFS7LW, SH/FS7LW, SH FS7LW, FS7LW, sh-fs7lw) Sony FS7 Lightweight Plate The Sony FS7 Lightweight Plate from SHAPE is a fixed baseplate that provides 15mm LWS rod support without interfering with the camera's shoulder-mount design. A pair of 8" long 15mm rods is included for attaching optional accessories such as a follow focus and matte box. In addition to rod ports, the Lightweight Plate also features ARRI rosettes on each side for attaching the FS7's right handle and an optional left-sided rosette handle. On the underside of the baseplate is a V-lock delta adapter, allowing the baseplate to be mounted on V-lock quick-release tripod plates, such as the Panasonic SHAM-TM700 or Sony VCT14. The delta adapter is attached to a bottom door, which can be opened up to access 1/4"-20 and 3/8"-16 camera screws.

Shape Adjustable Composite Shoulder Pad

Shape SH-SHPAD2 (SH_SHPAD2, SHSHPAD2, SH/SHPAD2, SH SHPAD2) Adjustable Composite Shoulder Pad The SHAPE Adjustable Composite Shoulder Pad is a core component of SHAPE's Composite series of camera supports. The pad rests on the camera operator's shoulder to transfer the weight of the camera and any accessories closer to the core of the body. The lightweight aluminum shoulder pad is padded for comfort. Attached to the front of the pad, the included Sliding Rod Block enables the adjustment – up to 2.75 in (7.0 cm) – that allows the operator to set a pair of 15mm rods and at the proper vertical level. The Adjustable Composite Shoulder Pad is compatible with several other camera rig components from SHAPE and, because it accepts standard 15mm rods, other manufacturers as well. You can attach a counterweight to the back of the shoulder pad to provide more support for the camera rig. The shoulder pad is recommended for camera rigs up to 15 lb (6.8 kg) if you're supporting it with dual rods or up to 7.5 lb (3.4 kg) if you're using a single rod, so it's perfect for heavy DSLR setups and lighter HD video camera rigs.

Shape Baseplate for Canon C300 Camera

Shape SH-B15C300 (SHB15C300, SH/B15C300, SH B15C300, B15C300, sh-b15c300) Baseplate for Canon C300 Camera The Shape C300 Baseplate is made specifically for the Canon EOS C300 Camera. This camera accessory provides a small, light setup solution expandable to a more elaborate setup. It features a pair of 15mm rods that are 12" long through the length of the baseplate. This baseplate attaches underneath the camera with 4 x M4 screws or with 3/8”-16 and 1/4”-20 screws that are included.

Shape 8000 V-Lock Quick Release Baseplate

Shape SH-BP0008 (SH_BP0008, SHBP0008, SH/BP0008, SH BP0008) 8000 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders.

Shape 8000 V-Lock Quick-Release Baseplate Kit

Shape SH-BP8000 (SH_BP8000, SHBP8000, SH/BP8000, SH BP8000) 8000 V-Lock Quick-Release Baseplate Kit With its long flat camera platform and V-lock quick-release compatibility, SHAPE's BP8000 V-Lock Quick Release Baseplate Kit is a versatile rig option for mid-sized cinema cameras with flat bases. The centerpiece of the kit is the V-lock baseplate. Several inches of adjustment is available for achieving balance with large or small lenses. Adjustable 15mm rods in the front and rear allow for different cameras to comply with the 15mm LWS standard for compatibility with follow focuses, lens supports, and more. If you're not carrying the camera on your shoulder, the entire rig can be locked into the included VCT-14 tripod plate. The included articulated handles adjust quickly, with the push of a button. Length adjustment is provided by way of a thumbscrew. Rosettes on either side of the baseplate secure the handles. See below for more details on the items included in this kit. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. Telescopic Handles with ARRI Rosettes (Black & Red) The black and red Telescopic Handles with ARRI Rosettes from SHAPE are left and right handgrips that can be attached to cameras and camera support hardware that has standard ARRI rosettes. Each arm features three points of articulation, combined with the approximately two inches of arm extension allows you to adjust the arms for your comfort. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place without having a full 360° of rotation. Shape's unique push-button articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. A second spring-loaded locking lever along the arms allows you to extend the arms up to two inches and rotate the handgrips throughout 360°. The arms are indexed for extension and rotation, so you can quickly move between known setups. The push-button locking joint enables independent rotation throughout 360°. Spring-loaded locking levers allow you to tighten or loosen the lever even when you do not have space to turn the lever throughout the entire 360° range. The arms feature two inches of extension and are indexed every 5mm of extension. The arms can rotate through 360° and feature 30° of index markings. 15mm Aluminum Rods (Pair, 8") This pair of Shape 15mm Aluminum Rods (8") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. 15mm Aluminum Rods (Pair, 4") This pair of Shape 15mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. SHAN-TM700 VTC-Style Quick-Release Tripod Adapter This is a Panasonic Tripod Adapter Plate from SHAPE allowing quick-release mounting/dismounting of professional broadcast cameras. Attach the camera via the VCT-style V-Lock mechanism and then mount to a tripod quick release plate. Multiple 1/4"-20 and 3/8"-16 threaded holes are lined up along the length of the plate on the bottom, allowing for the best possible balance selection.

Shape Composite for Sony F5 & F55

Shape SH-COMPOF5-F55 (SH_COMPOF5_F55, SHCOMPOF5-F55, SH/COMPOF5-F55, SH COMPOF5-F55) Composite for Sony F5 & F55 SHAPE's Composite for F55/F5 is the Composite rig for the Sony F55/F5 camcorder. Featuring the SHAPE QUICK HANDLE ROD BLOC, the SHAPE 15MM ROD SYSTEM PAPARAZZI RISER, the PAIR OF 15MM FEMALE-FEMALE RODS 8", the SHAPE COMPOSITE SHOULDER PAD and the SHAPE BACK PAD, the SHAPE COMPOSITE F3 secures the camera and accessories firmly for mobile applications. HAND 5: Quick Handle Rod Bloc The unique patented SHAPE QUICK HANDLE push-button technology features 2 SHAPE handles that can rotate individually on a 360° axis. ?With a simple push of a button, the SHAPE handles can be rotated. ?Once the red buttons are released, the SHAPE handles will be secured firmly in place. ROD2: 15mm Rod System Paparazzi Riser Equipped with a SHAPE 15MM ROD SYSTEM PAPARAZZI RISER, the SHAPE COMPOSITE STABILIZER enables you to raise the camera directly above the camera support. The system includes a PAIR OF 15MM FEMALE-FEMALE ROD 8”and features a variety of threaded holes (1/4-20” and 3/8-16”), located on the base, to attach a tripod plate and different types of monopods, while the holes in the front and rear of the SHAPE PAPARAZZI RISER are used to attach various accessories such as a SHAPE SLIDING ROD BLOC. With a camera base height of 2" and slot length of 4 in., the SHAPE riser system allows you to slide the camera back and forth to obtain the best position. It can be used to attach a video camera or a DSLR.
The PAIR OF 15MM FEMALE-FEMALE RODS (8"), located at the front, are used to attach accessories such as matte boxes, 35mm lens adapters and follow focus mechanisms. The threads enable you to use either 4" or 6" rods (½-13"). 2ROD15FF8: Pair of 15mm Female-Female 8" Rods The PAIR OF 15MM FEMALE-FEMALE RODS (8") located at the back are used to attach the SHAPE COMPOSITE SHOULDER PAD and other accessories. The threads enable you to use either 4" or 6" rods (1/2-13"). SHPAD1: Composite Shoulder Pad Padded for superior comfort, the SHAPE COMPOSITE SHOULDER PAD rests on your shoulder such that the body supports the weight of the camera and its accessories. The shoulder pad is powder coated with a special finish for a professional look. MALE SCREW KNOB (1/4-20) included. PAD1: Back Pad Powder coated with a special finish for a professional look, the SHAPE BACK PAD offers the camera support superior comfort and stability. Padded on one side, it is attached to the SHAPE COMPOSITE SHOULDER PAD via a MALE SCREW KNOB (1/4-20). You can adjust the position of the SHAPE BACK PAD to suit your body type with a vertical adjustment of 2" and a horizontal adjustment spanning of 360°. A MALE SCREW KNOB (1/4-20) allows easy attachment and removal of the BACK PAD. Optional: It is possible to attach a SHAPE SHAPE BOX on the SHAPE BACK PAD using the threaded holes (1/4-20).

Shape CP33 Cheese Plate with Anton Bauer Plate

Shape SH-CP33ANTON (SH_CP33ANTON, SHCP33ANTON, SH/CP33ANTON, SH CP33ANTON) (CP-33, CP/33) CP33 Cheese Plate with Anton Bauer Plate The Shape CP33 Cheese Plate with Anton Bauer Plate is a 15mm rod-mount cheese plate with an Anton Bauer Gold Mount battery plate screwed onto one side. The plate is 1/4" thick and features 33 threaded holes for accessories to be screwed into. These holes run end to end, from one side of the plate to the other. Four of the holes are 10/32" and the rest are 1/4" and 3/8". The Anton Bauer plate covers many of the holes from one side, but you can still screw into these holes from the other side as long as the screws are not much longer than the 1/4" thickness of the plate. The holes at the very corners of the plate are untouched by the Anton Bauer plate and can be used to attach accessories or devices like AJA's Ki Pro Mini. Screws are included for a Ki Pro Mini and for an IDX battery plate. The cheese plate is precision-machined as one piece.

Shape Telescopic Handle with Rod Block and Hard Case

Shape SH-HAND12KIT (SH_HAND12KIT, SHHAND12KIT, SH/HAND12KIT, SH HAND12KIT) Telescopic Handle with Rod Block and Hard Case The Telescopic Handle with Rod Block and Hard Case from SHAPE is a pair of hand grips that can be attached to 15mm LWS or 19mm rod systems, or even directly to cameras that have standard Arri rosettes. It features a modular design that can be configured in different ways to suit your applications. Each handle features a telescoping section that adds 1.5" of additional length when extended. The 905 Black Nanuk Case, a watertight, dustproof, and shock-resistant case, is included so that you can store your hand grips and keep them protected from the elements.

Shape Composite Shoulder Pad

Shape SH-SHPAD1 (SH_SHPAD1, SHSHPAD1, SH/SHPAD1, SH SHPAD1) Composite Shoulder Pad The Shape Composite Shoulder Pad is for the Shape F3 Composite Support Rig and intended for use with larger-sized cameras such as the F3, EX1, and P2hd, whereas for DSLRs and the C300, the Adjustable Composite Shoulder Pad or the Mini Composite Shoulder Pad would be better. The pad is compatible with 15mm rods, which attach into the red block atop the pad.

Shape Telescopic Support Arm with Rod Bloc

Shape SH-ARM2 (SH_ARM2, SHARM2, SH/ARM2, SH ARM2) Telescopic Support Arm with Rod Bloc The Telescopic Support Arm with Rod Bloc from SHAPE is a variable length support arm designed to stabilize a shoulder rig while keeping the user mobile. The unit consists of a telescopic arm, Rod Bloc, and multi-function shoe which can be independently adjusted to the user's preference. The telescopic arm is a simple aluminum support which may be adjusted at two points, from a minimum length of 14" to a maximum of 20". The top end of the rod is capped by an adjustable single-knob joint which supports and positions the CNC machined aluminum Rod Bloc—the attachment point for a shoulder-mounted rig. At the arm's base is an internal spring designed to provide added control when tilting vertically, allowing the user to capture a more stable image while in motion. The bottom end of the telescopic arm is fitted with SHAPE's multi-function shoe—a cup-style base designed to rest against the user's torso or in a support belt for additional stability. If needed, the shoe may be removed so that the arm may be used as a boom, providing a connection point for a monitor, microphone, light, and more.

Shape Paparazzi Handle for Canon C100/C300/C500

Shape SH-PAC300 (SHPAC300, SH/PAC300, SH PAC300, PAC300, sh-pac300) Paparazzi Handle for Canon C100/C300/C500 The Shape Paparazzi Handle for Canon C100/C300/C500 is specifically designed to work with the Canon Cinema EOS line of cameras using the included baseplate. The rig features 15mm rod clamps with spring-loaded levers and 12" 15mm rods. The baseplate maintains the proper lens center to rod height for use with available rod mounted accessories. This allows you to use available standard follow focus units, zoom motors, and matte boxes with your camera while using the baseplate.  The handle attaches to an included Shape Rod Bloc, creating the Paparazzi with Bloc handle. This allows you to mount the handle to LWS 15mm rods with the handle rising vertically and projecting forward over the camera. This allows you to get low angle shots without having to bend down; you can also under-sling the handle to get high angle shots. The handle features several 1/4"-20 and 3/8"-16 threaded accessory mounting points. Baseplate for Canon C300 Camera The Shape C300 Baseplate is made specifically for the Canon EOS C300 Camera. This camera accessory provides a small, light setup solution expandable to a more elaborate setup. It features a pair of 15mm rods that are 12" long through the length of the baseplate. This baseplate attaches underneath the camera with 4 x M4 screws or with 3/8”-16 and 1/4”-20 screws that are included. Paparazzi with Bloc The SHAPE Paparazzi with Bloc is an ergonomic-designed Paparazzi Handle screwed tight to a Rod Bloc by two 1/4" screws. The Handle features a total of 20 screw-holes for attaching accessories, and the Bloc mounts 15mm rods and keeps the Handle parallel with a camera. You can slide the Bloc up and down the rods and tighten it into position by a red lever on the side. Both the Handle and Bloc are totally solid -- not at all hollow -- and are both water cut / laser cut, as opposed to being molded. The 20 screw-holes are a mix of 1/4", 3/8" and 1/2" sizes and all run completely through from end to end. They are positioned vertically or horizontally along the Handle. The 1/4" and 3/8" holes can take on most any 1/4" and 3/8" accessories like lights, monitors, mics, grips, remote controls, recorders, articulating arms, wireless audio receivers, camera plates, and more. And into the 1/2" holes you can screw in male-threaded SHAPE rods. The diverse set of screw-holes lets you get very creative in dressing up your rig. And the ability to screw in rods lets you just as creatively extend your rig.

Shape Paparazzi Riser/15mm Rod System

Shape SH-ROD2 (SH_ROD2, SHROD2, SH/ROD2, SH ROD2) Paparazzi Riser/15mm Rod System Use the Shape Paparazzi Riser/15mm Rod System as a base to attach accessories to your DSLR or small camcorder. This system displaces the weight of accessories from the camera to the rods/riser. The Paparazzi riser adds 2" to the camera height while its mounting-screw slot allows for up to 4" of front-to-back adjustment. The 15mm rod system offers thumbscrew-locking 8" rods with Allen key vertical adjustment (up to 1.375"). This riser/rod system can work with various on-camera accessories such as a lens support, matte box, lens adapter, or follow focus. Paparazzi Riser The Paparazzi Riser from SHAPE is a 2" fixed-height camera riser offering either parallel or perpendicular camera support. The riser's top surface includes a 4" sliding screw slot that enables the camera to be adjusted front-to-back or side-to-side, depending on the riser's orientation. This Paparazzi Riser features several 1/4"-20 and 3/8"-16 threaded holes. The hole located on the base is used to attach the riser to a camera support, while the front and rear holes can be used to attach various accessories such as a sliding rod block. The Paparazzi Riser is suited for use with small camcorders and DSLR cameras. Constructed of CNC-machined, anodized aluminum, this riser is the common component of all SHAPE Composite camera support systems.

Shape Friction & Gear Follow-Focus Riser Rail Kit

Shape SH-FFROD2 (SH_FFROD2, SHFFROD2, SH/FFROD2, SH FFROD2) Friction & Gear Follow-Focus Riser Rail Kit Friction & Gear Follow-Focus Riser Rail Kit with Adjustable Marker The Shape Friction & Gear Follow-Focus Riser Rail Kit with Adjustable Marker is a follow-focus solution fully-equipped for a camera to be added onto it. It combines Shape's Follow-Focus Friction Clic and 15mm Rod Riser System. The Follow-Focus Clic is designed to attach onto standard 15mm rods and can only pull focus if thus attached. The included Rod Riser System provides such rods and additionally provides a camera platform. The Riser, with the Clic and camera on it, can be mounted onto a tripod via an optional quick-release plate. The plate would attach underneath the camera platform. The platform has various 1/4-20" and 3/8-16" threaded holes in its base. The whole set can also be attached onto Shape shoulder support products. Aside from being a solution for the Clic, the Rod Riser serves additionally as a solution for other accessories, such as 35mm lens adapters and matte boxes. It takes the weight of such accessories off of a lens and onto itself. The Follow-Focus Clic attaches onto the Riser via a clamp system that Shape has patented.  The Clic's focus wheel can be positioned on the left or right side of a lens for either left or right-handed control. The focus mechanism and focus disk of the Clic move together horizontally to adjust to the attached lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus disk can be used either at the front or the rear of the focus mechanism so to accommodate different lens lengths. The Clic's white mark disk can be written on with non-permanent markers. It is thermoplastic, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. The Clic and the Riser together create a kit that can adjust with accuracy to an added camera. The camera can be adjusted into desired positions on the Riser's camera platform; the Riser's rods can be adjusted vertically and horizontally; and the Clic is highly-adjustable as noted above.

Shape Friction & Gear Follow-Focus Clic with Adjustable Marker

Shape SH-FFCLIC (SH_FFCLIC, SHFFCLIC, SH/FFCLIC, SH FFCLIC) Friction & Gear Follow-Focus Clic with Adjustable Marker The Shape Friction & Gear Follow-Focus Clic with Adjustable Marker is designed to attach onto standard 15mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic atop the rods, and then slide and close a Shape-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods. The Clic's focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature -- the focus disk -- moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism, as you see in the photo above, or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from a cube-shaped gearbox that you can't see in the photo above because it sits behind the focus disk. Once the screws are off, the focus disk can just be flipped over for use with longer lens constructions. In the photo above, the white mark disk that you see to the right of the red knob is made of highly resistant Delrin thermoplastic. It can be written on with non-permanent markers to mark up focus measurements for various predetermined shots, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. The Clic is CNC machined and made of lightweight anodized aluminum for strength and durability. Designed to attach onto standard 15mm rods. Attaches onto the rods via a patented clamp system. The focus mechanism moves horizontally to adjust to the lens. The focus mechanism can be used on the left or right side of the lens. A friction wheel and a gear wheel are included to interchange as the focus disk. The focus disk flips to the rear of the focus mechanism to accommodate longer lenses. A thermoplastic mark disk can be written on with non-permanent markers and is interchangeable. An included marker attaches beside the mark disk and slides and tightens into positions along the disk.  

Shape Single Quick Handle with Double ARRI Rosette

Shape SH-HAND2 (SH_HAND2, SHHAND2, SH/HAND2, SH HAND2) Single Quick Handle with Double ARRI Rosette The Single Quick Handle with Double ARRI Rosette from SHAPE features SHAPE's quick-lock button technology. The handle can rotate on a 360° axis. The handle and arm can be rotated by pushing the red button. Once the button is released, the handle is secured firmly in place. The Quick Handle Rosette features a stainless steel locking mechanism for more durability. Providing a solid grip, the handle fits perfectly on the SHAPE baseplate series, including the BP0001 and BP0007 Quick-Release Baseplates, and the Dovetail System thanks to the precision of the ARRI rosette sockets. The handle is removable with one knob screw. It is constructed from CNC machined, high-quality aircraft grade aluminum parts, which are hard anodized for a resistant finish and assembled with stainless steel screws to prevent rusting.

Shape Quick Handle & Rod Bloc

Shape SH-HAND5 (SH_HAND5, SH-HAND5, SH-HAND5, SH-HAND5) Quick Handle & Rod Bloc The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.    

Shape Adjustable Rod Bloc for 15mm and 19mm Rods

Shape SH-BLOC1519AR (SH_BLOC1519AR, SHBLOC1519AR, SH/BLOC1519AR, SH BLOC1519AR) Adjustable Rod Bloc for 15mm and 19mm Rods The Shape Adjustable Rod Bloc for 15 to 19mm Rods is designed to fit HAND10 handles from SHAPE (sold separately). It fits both 15mm lightweight and 19mm studio rods and features ARRI rosettes.

Shape Composite Rider Camera Support for DSLRs

Shape SH-COMPORIDE (SH_COMPORIDE, SHCOMPORIDE, SH/COMPORIDE, SH COMPORIDE) Composite Rider Camera Support for DSLRs The Composite Rider Camera Support for DSLRs from SHAPE is a fully featured support system for using DSLR cameras while shooting video. It positions the camera centered in front of your eye, allowing the use of the camera's viewfinder. It has a set of 15mm rods for attaching accessories such as a matte box, and includes a riser which makes it possible to raise the camera directly up from the support for flexible positioning. The riser can be attached to the left or to the right of the 15mm support rods, accommodating left-handed as well as right-handed shooters. The padded shoulder pad and back pad make using the COMPOSITE system, even for long periods, a comfortable proposition. Sturdy and lightweight camera support system Inline position with shoulder axis Unique patented QUICK HANDLE push-button technology Height-adjustable SLIDING ROD BLOC using black knob PAPARAZZI RISER with several threaded holes (1/4-20" and 3/8-16") Length-adjustable rods using red knobs on ROD BLOCs Fast transition from tripod to shoulder in one simple click Padded back and shoulder pads for superior comfort and stability  

Shape Composite Grip Camera Support

Shape SH-COMPOGRIP (SH_COMPOGRIP,SHCOMPOGRIP, SH/COMPOGRIP, SH COMPOGRIP) Composite Grip Camera Support The Shape Composite Grip Camera Support is an adjustable, lightweight, and compact 15mm LWS shoulder mount rig for DSLRs and compact video cameras. The rig is built around the Paparazzi Riser baseplate, a pair of 15mm Sliding Rod Blocks, and a set of four 8" 15mm rods. The sliding rod blocks enable you to adjust the height of the rods to suit your camera setup. For shoulder mounted shooting, handles and a shoulder pad are included the mount onto the rods. The handles feature rosettes and SHAPE's patented spring-loaded push-button technology that lets you quickly adjust the angle of the grips on-the-fly with just the push of your thumb. The Adjustable Composite Shoulder Pad is height adjustable thanks to its own Sliding Rod Block. For additional support and comfort, a Back Pad is also included that attaches to the rear of the shoulder pad. When you need to go tripod-mounted, the Paparazzi Riser features 1/4"-20 and 3/8"-16 threaded holes at the bottom. Paparazzi Riser The Shape Paparazzi Riser is a camera riser that can be placed either parallel or perpendicular to the camera support, which enables raising the camera directly above the camera support or offset to the right or to the left. The Paparazzi Riser features a variety of threaded holes (1/4-20" and 3/8-16"); one located on the base is used to attach the riser onto a camera support, while the threaded holes in front and rear of the Paparazzi Riser attach various accessories like the sliding rod block. With a camera base of 2", the riser can be used to attach a small video camera or a DSLR with video capability. Made of aluminum and built using CNC machines, the Paparazzi Riser is compatible with the camera supports of the Cameleon, Composite, Red Mamouth, Spider, and Sumo series and is hard anodized for a resistant finish. Placed either parallel or perpendicular to the camera support - enables raising the camera directly above the camera support or offset to the right or to the left Variety of threaded holes (1/4-20" and 3/8-16") - one located on the base used to attach the riser onto a camera support With a camera base of 2", riser can be used to attach a small video camera or a DSLR with video capability Threaded holes in front and rear attach various accessories like the sliding rod block Made of aluminum and built using CNC machines Compatible with the camera supports of the Cameleon, Composite, Red Mamouth, Spider, and Sumo series Hard anodized for a resistant finish Sliding Rod Block The SHAPE Sliding Rod Block allows you to attach 15mm rods to select SHAPE gear and adjust them vertically to support different sized lenses and accessories. Using supplied screws, it can be attached to the front of the PAPARAZZI RISER, CAMELEON I, SPIDER I, SUMO I, and other rigs/accessories that support the screw pattern. One ratchet knob tightens both optional rods in place. Pair of 15mm Female - Female Rod (8") The Shape Pair of 15mm Female - Female Rod (8") are anodized aluminum rods with 1/2"-13 threaded female extremities. The rods are 8" (203mm) long and have a diameter of 0.59" (15mm). You can use the 15mm Female - Female Rods (8") with 15mm Male - Female Rod (4" / 101.6mm), 15mm Female - Female Rod (6" / 152.4mm), Rod Black, and the Sliding Rod Block. Anodized aluminum rods with 1/2"-13 threaded female extremities Rod Length - 8" (203mm) Rod Diameter - 0.59" (15mm) Compatible with 15mm Male - Female Rod (4" / 101.6mm), 15mm Female - Female Rod (6" / 152.4mm), Rod Black, and the Sliding Rod Block Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Quick Handle Provides professional video stabilization with 2 handles Each handle offers 360° individual rotation Offers easy attachment/removal Rod Block Composed of anodized aluminum Offers composite camera support for all 15mm rods Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob With 2 screw-threaded holes, the Rod Block provides for attachment of components Adjustable Composite Shoulder Pad The SHAPE Adjustable Composite Shoulder Pad is a core component of SHAPE's Composite series of camera supports. The pad rests on the camera operator's shoulder to transfer the weight of the camera and any accessories closer to the core of the body. The lightweight aluminum shoulder pad is padded for comfort. Attached to the front of the pad, the included Sliding Rod Block enables the adjustment – up to 2.75 in (7.0 cm) – that allows the operator to set a pair of 15mm rods and at the proper vertical level. The Adjustable Composite Shoulder Pad is compatible with several other camera rig components from SHAPE and, because it accepts standard 15mm rods, other manufacturers as well. You can attach a counterweight to the back of the shoulder pad to provide more support for the camera rig. The shoulder pad is recommended for camera rigs up to 15 lb (6.8 kg) if you're supporting it with dual rods or up to 7.5 lb (3.4 kg) if you're using a single rod, so it's perfect for heavy DSLR setups and lighter HD video camera rigs. Back Pad The Shape Back Pad is a professional video accessory that weighs 0.35 lb (0.160 kg) and offers augmented camera support stability and comfort. Padded on one side, the pad is attached to the shoulder rig via a screw knob. You can adjust the positioning of the Back Pad in accordance to your body type with a vertical adjustment range of 1-1/4" and a horizontal adjustment spanning 360°. A screw knob allows easy attachment and removal of the back pad from the support. With a 1/4-20 threaded hole, the Back Pad supports attachment of the Shape Box and other accessories. The Back Pad is compatible with all Shape camera supports except the Mountain series. Weighs 0.35 lb (0.160 kg) Offers augmented camera support stability and comfort One-sided padding Provides easy position adjustment in accordance to your body type with a vertical adjustment range of 1-1/4" and a horizontal adjustment spanning 360° Allows easy attachment and removal of the back pad from the support via a screw knob Supports attachment of the Shape Box and other accessories via a 1/4-20 threaded hole Compatible with all Shape camera supports except the Mountain series

Shape Composite DSLR Stabilizer

Shape SH-COMPOSTAB (SH_COMPOSTAB, SHCOMPOSTAB, SH/OMPOSTAB, SH COMPOSTAB) Composite DSLR Stabilizer Featuring the SHAPE Telescopic Support Arm And Rod Bloc, the SHAPE Quick Handle Rod Bloc, the SHAPE 15MM Rod System Paparazzi Riser includes a PAIR OF 15mm Female-Female Rod 8”, the SHAPE Offset Rail Bloc, the PAIR OF 15MM Male-Female Rods 6", the SHAPE Adjustable Composite Shoulder Pad and the Back Pad, the SHAPE DSLR Stabilizer shoulder rig secures the camera and accessories firmly for mobile applications. ARM2: Telescopic Support Arm and Rod Bloc The hands-free Telescopic Support Arm and Rod Bloc includes a camera mount bracket with a 4" Multifunction Shoe that provides a large surface contact area and a Rod Bloc. Increased stability, manoeuvrability and performance are provided to the camera support using the Telescopic Support Arm and Rod Bloc which can be easily attached to the shoulder rig via the Rod Bloc. You can extend the Telescopic Support Arm and Rod Bloc from a length of 14 to 20". Rotation of 360° along the vertical and horizontal axes is possible via the rotating arm. Easy attachment and removal of the cup attributes versatility to the Telescopic Support Arm and Rod Bloc. By removing the cup, the arm can be used for supporting accessories such as a microphone or camera light. HAND 5: Quick Handle Rod Bloc The unique patented SHAPE Quick Handle push-button technology features 2 SHAPE handles that can rotate individually on a 360° axis. With a simple push of the red buttons, the SHAPE handles can be rotated. Once the red buttons are released, the SHAPE handles will be secured firmly in place. The SHAPE Quick Handle Rod Bloc offers camera support for all 15mm rods. You can achieve precise positioning by sliding the SHAPE Quick Handle Rod Bloc along the rods and tightening the red knob on the ROD BLOC. The locking mechanism is made of stainless steel for more durability. *All CNC machined high quality aircraft grade aluminium parts are hard anodized for a resistant finish. All parts are assembled with stainless steel screws. ROD2: 15mm Rod System Paparazzi Riser Equipped with a SHAPE 15mm Rod System Paparazzi Riser, the SHAPE DSLR Stabilizer shoulder rig enables you to raise the camera directly above the camera support. The system includes a Pair Of 15mm Female-Female Rod 8”and features a variety of threaded holes (1/4-20” and 3/8-16”), located on the base, to attach a tripod plate and different types of monopods, while the holes in the front and rear of the SHAPE Paparazzi Riser are used to attach various accessories such as a SHAPE Sliding Rod Bloc. With a camera base height of 2" and slot length of 4 in., the SHAPE riser system allows you to slide the camera back and forth to obtain the best position. It can be used to attach a video camera or a DSLR.
The Pair Of 15mm Female-Female Rods (8"), located at the front, are used to attach accessories such as matte boxes, 35mm lens adapters and follow focus mechanisms. The threads enable you to use either 4" or 6" rods (½-13"). RAILBLOC3: Offset Rail Bloc You can offset your camera to the right or the left of the SHAPE Paparazzi Riser by using the two black screws on the SHAPE Offset Rail Bloc to create more or less distance between the camera and the shoulder mount. The SHAPE Offset Rail Bloc is used for attaching the SHAPE Paparazzi Riser to the left or the right of the 15mm rods enabling a right or left handed user to work with the camera support. It provides two threaded holes on one side which are used for screwing the SHAPE Offset Rail Bloc to the front of the SHAPE Paparazzi Riser with a 4mm Allen key. A second SHAPE Offset Railbloc can also be attached to the back of the SHAPE Paparazzi Riser. The SHAPE Offset Rail Bloc is then used for attaching a SHAPE Composite Shoulder Pad such as the SHPAD1 or the SHPAD2 by inserting rods. *All CNC machined, high quality aircraft grade aluminium parts are hard anodized for a resistant finish and assembled with stainless steel screws to prevent rusting. 2ROD15MF6: Pair of 15mm Male-Female Rods 6" The PAIR OF 15MM MALE-FEMALE RODS (6"), located at the back, are used to attach the Adjustable Composite Shoulder Pad and other accessories. The threads enable you to use either 4" or 6" rods (1/2-13"). SHPAD2: Adjustable Composite Shoulder Pad Padded for superior comfort, the SHAPE Adjustable Composite Shoulder Pad rests on your shoulder such that the body supports the weight of the camera and its accessories. A SHAPE Sliding Rod Bloc and a Camera Screw Knob (1/4-20) are included with the shoulder pad which is powder-coated with a wrinkle finish for a professional look.

Optional: It is possible to add a RODSUP1: Rod Bloc to attach more accessories on the SHAPE shoulder pad. PAD1: Back Pad Black powder-coated paint for a professional look, the SHAPE Back Pad offers the camera support superior comfort and stability. Padded on one side, the pad is attached to the SHAPE Adjustable Composite Shoulder Pad via A Camera Screw Knob (1/4-20). You can adjust the position of the SHAPE Back Pad to suit your body type with a vertical adjustment of 2" and a horizontal adjustment spanning of 360°. The Camera Screw Knob (1/4-20) allows easy attachment and removal of the SHAPE Back Pad.

Optional: It is possible to attach a SHAPE Box on the SHAPE Back Pad using the threaded holes (1/4-20).