Hague STAND DOLLY

Hague STAND DOLLY D 1 D1 D-1 D/1 The Hague D1 Stand Dolly has been designed for use with the Hague K2WS Junior Jib With Stand and K10 Camcrane jibs as well as the PHS Power Head Stand and the TVS LCD/Monitor Stand with Vesa tilt mount. This sturdy dolly has large 100mm diameter, individually braked, swivel wheels enabling the dolly to be moved with ease. It's made of aluminium and folds down for easy transportation. It is quick and simple to set up and is supplied with 3 straps to secure the stand to the dolly. Colour black. Suitable for Hague K2WS Junior Jib With Stand, K2S Junior Jib Stand, K10 Camcrane, TVS LCD/Monitor Stand With Vesa Tilt Mount, PHS Power Head Stand.    

Hague Junior Jib Stand

Hague K2S (K2-S, K2/S, K2_S, K2 S) Junior Jib Stand The Hague Junior Jib Stand is ideal if you do not have a suitable sturdy tripod to mount the jib on. It has an adjustable telescopic column with a minimum height of 110cm and a maximum height of 188cm. The column can be locked at the required height and there is a safety pin to prevent the column slipping.  The stand is made from lightweight aluminium.

Hague K11 Compact Camera Crane - Jib

Hague K11 (K-11, K/11, k11) Compact Camera Crane - JibThe Hague K11 Compact Camera Jib is so small & compact it can be taken almost anywhere with ease. The Camera Crane has been specifically designed to be lightweight and simple to set up, allowing you to enhance your video productions by getting those beautifully professional looking crane shots.The jib is supplied in two parts which are only 800mm (31 ½”) long. These slot together (no tools required) to create a jib that has a vertical crane movement that will lift your camera from ground level to a height of 2.6 metres (8ft 6”).It mounts directly to the tripod’s head in the same way as you would mount your camera and it can be held by both ¼” and 3/8” camera screws. The jib uses the tripod’s head for pan movement which allows the jib to smoothly pan from side to side and move round through 360 degrees. Locking the tilt on the tripod video head ensures the camera will remain level as the jib is raised up and down.It has a maximum crane movement of 2.6 metres (8ft 6”), which is far greater than other jibs in this class and price bracket. A standard bar weight or a sandbag can be used for counterbalance (not supplied). The telescopic counterbalance bar can be adjusted to get the correct balance to match your camera’s weight.The ideal camera weight is between 0.5kg to 2kg, but the jib will support up to 2.5kg when mounted to a suitable tripod or it could be mounted to the K11S - Stand which we sell as an optional extra please see below.

Hague K3 Mini Camera Jib Traveller

Hague K3 (K-3, K 3, K/3, k3) Mini Camera Jib Traveller The Hague Mini Jib Traveller K3 is small, compact, lightweight and easy to take anywhere. Measuring just 82cm for transit, and weighing just 2kg, this jib is ideal for people on the go. It’s ideal for both DSLRs and all handheld camcorders under 3kg, or could be used with action cameras such as the GoPro for an even more lightweight set-up. The Mini Jib Traveller is fastened directly to the video head of any sturdy tripod, in the same way you would attach your camera. It can be mounted using both 1/4” and 3/8” screws. On the end of the jib is a camera plate mounted on a pulley with a control cable coming down the jib to a second pulley at the side of the video head on the tripod. It is this control cable that keeps the camera level as the jib is raised or lowered. Tilting the tripod’s video head controls the camera pulley on the end of the jib, enabling the camera to be tilted up or down. The radial ball bearings in the pulley ensure a very smooth tilt movement. The jib has a telescopic weight bar which can be adjusted to counterbalance the camera with standard bar weights (not supplied) or a sandbag used for counterbalance. An additional feature of the Mini Jib Traveller is the ability to mount the jib horizontally so you can create sideways tracking movement, similar to a slider, or the camera can be positioned to move forward or back. Combine this with using the pan bar on the video head and some very unusual shots can be achieved. Specifications: Up and Down Crane movement - 140cm, Length from tripod to camera - 72cm, Telescopic weight bar length 20 - 70cm, Total maximum length 146cm, Transit Size: 82 x 10 x 7cm, Weight: 2kg.   Includes K3 Mini Jib Traveller with tilt facility. The price does not include the tripod, camera, weights or any other accessories shown.  

Hague K10-UPH Camcrane with stand & underslung powerhead

Hague K10-UPH (K10UPH, K10 UPH, K10/UPH, k10-uph) Camcrane with stand & underslung powerhead The Hague CamCrane K10-UPH is quick and simple to set up, it is supplied with its own stand and a underslung remote controlled pan & tilt powerhead. The stand's height is adjustable from 1.1 to 1.4 metres high with standard bar weights (not supplied) used for counterbalance, these are held in place by the weight bar and there is an adjustable fine trim weight to obtain perfect balance. Once balanced the camera can smoothly move from ground level to almost 4 metres high and the crane will pan 360 degrees on the stand. You also have the ability to pan and tilt the camera through 360 degrees by controlling the underslung powerhead using the wired remote control. The distance from the stand to the camera is 2.5 metres and the K10 has a total length of 3.6 metres. It is ideal for all handheld cameras under 2.5kg. An optional monitor bracket is available, this enables a LCD monitor to be fastened to the crane, making it easier to monitor your shots.   The Hague UPH electronic motorized Underslung Pan & Tilt Power Head is suitable for all handheld cameras that weigh less than 2.5kg. Having the camera underslung gives much greater tilt movement (360 degrees) which enables the camera to point directly down if required. The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control.  Includes: K10 CamCrane, Fine Trim Weight, Weight Bar, Remote Underslung Pan & Tilt Power Head, Power Head Remote and extension cable.

Hague K18-UPH Camera Crane Jib With Remote Controlled Powerhead

Hague K18-UPH (K18UPH, K18 UPH, K18/UPH, k18-uph) Camera Crane Jib With Remote Controlled Powerhead The Hague CamCrane K18 with UPH Underslung Pan & Tilt Power Head is quick and simple to set up, it attaches to any sturdy 100 or 75mm "bowl type" tripod or can be supplied with the optional Hague Dolly D3. It’s ideal for both handheld camcorders and DSLR cameras up to 2kg (4.4lbs) in weight.   Once balanced the camera can smoothly move from ground level to almost 7 metres high and the crane will pan 360 degrees. You have the choice of using the CamCrane at it’s full length or without two of the centre sections. At it's full length support cables are used to improve rigidity. The counterbalance arm has an adjustable fine trim weight and a weight bar with handgrips. Standard bar weights are used for counterbalance (not supplied). A supplied monitor bracket enables a LCD monitor to be fastened to the crane, making it easier to monitor your shots.   The electronic motorized Underslung Pan & Tilt Power Head is suitable for all handheld camcorders and DSLRs that weigh less than 2kg. The Power Head fastens to the crane with the supplied screws. The camera is mounted underslung with a tilt movement of 360 degrees, this enables the camera to point directly downwards when required. The head also pans 360 degrees on the end of the crane. The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control.   The K18 CamCrane is made of aluminium and breaks down into 5 main sections, making it easier to handle in transit. It is supplied in a cardboard carton but an optional transit case is also available.   K18 CamCrane - Specifications Length from stand/tripod to camera 427cm at its longest length, or 210cm at its shortest length. Length from stand/tripod to weight bar 143cm. Total length: 570cm or 350cm at its shortest length. Vertical crane movement from ground level to 695cm high (at its longest length) or 226cm (at its shortest length). The maximum vertical crane movement includes going down as well as up, so the crane would need to be on a raised area to achieve the full movement. Colour – Black. Transit Size: 120 x 18 x 16 cm. Weight: 17kg (37.5lbs).   UPH Remote Pan & Tilt Head - Specifications Weight – 1.7kg. (3.75lbs) Dimensions – 356x240x103mm (14x9.5x4 inches). Head sockets – 1 x 7 pin din, 1 x 6v DC in. Vertical Tilt & Horizontal Pan- 360 Degrees. Approximate speed – Pan & Tilt variable from 4 to 8 degrees per second. On/Off switch. Power Requirements – AA Batteries x 4. Head construction – Black ABS plastic and powder coated CNC machined aluminium. Maximum Camera Weight - 2kg.   UPH Hand Held Controller - Specifications Dimensions – L125 x W45 x H15mm. Control cable with 7 pin din plug. Speed - Slider control.     Price includes:- K18 CamCrane with UPH Underslung Power Head and MB/A Monitor Bracket. Price does not include the Camera, Tripod, Dolly, Monitor or any of the other accessories shown.

Hague K18-PH200 CamCrane Camera Jib With Pro Pan & Tilt Powerhead

Hague K18-PH200 (K18PH200, K18 PH200, K18/PH200, k18-ph200) CamCrane Camera Jib With Pro Pan & Tilt Powerhead The Hague CamCrane K18 with the joystick controlled PH200 Pro Pan & Tilt Power Head is quick and simple to set up, it attaches to any sturdy 100 or 75mm "bowl type" tripod or can be supplied with the optional Hague Dolly D3. It’s ideal for both handheld camcorders and DSLR cameras up to 4kg (8.8lbs) in weight.   Once balanced the camera can smoothly move from ground level to almost 7 metres high and the crane will pan 360 degrees. You have the choice of using the CamCrane at it’s full length or without two of the centre sections. At it's full length support cables are used to improve rigidity. The counterbalance arm has an adjustable fine trim weight and a weight bar with handgrips. Standard bar weights are used for counterbalance (not supplied). A supplied monitor bracket enables the PH200 control box and a LCD monitor to be fastened to the crane, making it easier to monitor your shots.   The PH200 Pro Pan & Tilt Power Head will pan and tilt through 360 degrees, this enables the camera to point directly upwards or downwards when required. It is driven by two custom-geared motors with belt drive. The power head’s drive pulleys have sealed radial ball bearings for effortless smooth movement with minimum backlash. The motor drive can be easily disengaged to enable the camera to be balanced correctly on the camera plate. The head’s camera plate is adjustable for different sizes of camera and will support up to 4kg (8.8lbs). The speed of movement is variable, from the slowest crawl up to 52 degrees per second. The drive motors are quiet at low speeds, but will be heard at higher speeds if the camera's onboard microphone is used. (Similar to most power heads on the market). The head and controller are supplied in their own transit case.   The Joystick Control gives the head precision pan and tilt movement in either direction, from a slow crawl up to the required speed. The Joystick will also pan and tilt simultaneously. On the side of the control box is a variable speed controller, so you can set the maximum speed for better control, there are also switches to change the direction of the joystick control and an on & off switch. On the front of the control box are sockets for the control cable, 12vDC in, plus a composite video out phono socket, this enables a monitor to be added to monitor your shots. Led lights indicate when the unit is switched on and when the internal battery is on charge. The head is powered by a rechargeable internal battery which will last approximately 3 hours, or can be powered from the supplied mains adaptor. On the base of the control box is a ¼” threaded hole to allow it to be mounted to the crane. A 5 metre cable is supplied to connect the control box to the head. This cable can also carry a composite signal from the head to the controller, allowing a monitor to be used without the need of additional wires.   The K18 CamCrane is made of aluminium and breaks down into 5 main sections, making it easier to handle in transit. It is supplied in a cardboard carton but an optional transit case is also available.   K18 CamCrane - Specifications Length from stand/tripod to camera 427cm at its longest length, or 210cm at its shortest length. Length from stand/tripod to weight bar 143cm. Total length: 570cm or 350cm at its shortest length. Vertical crane movement from ground level to 695cm high (at its longest length) or 226cm (at its shortest length). The maximum vertical crane movement includes going down as well as up, so the crane would need to be on a raised area to achieve the full movement. Colour – Black. Transit Size: 120 x 18 x 16 cm. Weight: 17kg (37.5lbs).   PH200 Remote Pan & Tilt Power Head - Specifications Weight – 2.4kg. Dimensions – L240 x W120 x H450mm. Head sockets – 1 x 6 pin control socket. 1 x RCA phono socket (video in). Head construction – Black powder coated CNC machined aluminium. Drive - 2 Custom-geared motors with belt driven drive pulleys. Maximum Camera Weight - 4kg. Approximate maximum sized camera L450 x W180 x H280mm.   PH200 Joystick Control Box- Specifications Weight – 1kg. Dimensions – L140 x W100 x H75mm. Control box sockets – 1 x 6 pin control socket. 1 x RCA phono socket (video out). 1 x 12vDC in socket, size 2.1mm. Switches – On/off, Pan direction, Tilt direction, and Maximum speed control. Approximate Speed – Variable from 0 to 52 degrees per second. Power Requirements – 12 -15Vdc. Control Box construction – Black powder coated aluminium with non slip feet and ¼” threaded mounting hole. Mains adapter 100-240v AC to 15Vdc. Control Cable – Length 5 metres.     Price includes:- K18 CamCrane with PH200 Pro Pan & Tilt Power Head, Control Box Mounting Bracket and Monitor Bracket. Price does not include the Camera, Tripod, Dolly, Monitor or any of the other accessories shown.

Hague K2WS Junior Jib with Stand

Hague K2WS Junior Jib With Stand  

Hague Junior Jib

Hague Junior Jib