Shape Blackmagic URSA Mini Handle Kit

Shape SH-HANDUR (SH/HANDUR, SH HANDUR, SHHANDUR, HANDUR, sh-handur) Blackmagic URSA Mini Handle Kit This handle kit is perfect to use the Blackmagic URSA Mini in several configuration. Both handles include ARRI rosette standard to attach on the camera or on a Baseplate. The Blackmagic URSA Mini remote extension handle offers an ajustable arm extension for the side hand grip provided with the URSA Mini. It features Shape's patented push button technology for easy angle adjustment and 360 degree rotation. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm. The single telescopic handle is a versatile and adjustable handgrip that is perfect to use with the URSA Mini. Allowing 1.5" of extension and a 360 degree rotation of the arm and handgrip provided by the the push-button technology.

Shape Telescopic Handles with ARRI Rosettes (Black)

Shape SH-HAND12SHADOW (SH_HAND12SHADOW, SHHAND12SHADOW, SH/HAND12SHADOW, SH HAND12SHADOW) Telescopic Handles with ARRI Rosettes (Black) The black Telescopic Handles with ARRI Rosettes from SHAPE are left and right handgrips that can be attached to cameras and camera support hardware that has standard ARRI rosettes. Each arm features three points of articulation, combined with the approximately two inches of arm extension allows you to adjust the arms for your comfort. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place without having a full 360° of rotation. Shape's unique push-button articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. A second spring-loaded locking lever along the arms allows you to extend the arms up to two inches and rotate the handgrips throughout 360°. The arms are indexed for extension and rotation, so you can quickly move between known setups.

Shape Wooden Replacement for Left Rubber Handle Clamp

Shape SH-WL-HAND (SH_WL_HAND, SHWL-HAND, SH/WL-HAND, SH WL-HAND) Wooden Replacement for Left Rubber Handle Clamp Shape made these wooden hand grips to replace the rubber clamp handles and add a natural and ergonomic feeling. This product is compatible with the entire SHAPE HANDLE line, the aluminium bracket inside the wood handle is designed to facilitate the handle replacement. The wooden hand grip was designed with an ergonomic surface to add more comfort when you are shooting for long hours. The product is made of Canadian maple hardwood and a high-quality varnish top-coat to provide more durability. It is also made in Canada and covered by Life time warranty on wood parts and CNC machined parts.

Shape Right Wooden Handle Grip for ARRI Rosette

Shape SH-WR-HAND1 (SH_WR_HAND1, SHWR-HAND1, SH/WR-HAND1, SH WR-HAND1) Right Wooden Handle Grip for ARRI Rosette This product combines wooden hand grips with well known technology to add a nice natural touch to your rig. The handle offers two points of adjustment for an optimal user comfort. The wooden hand grip was designed with an ergonomic surface to add more confort when you are shooting for long hours.

Shape Left Wooden Handle Grip for ARRI Rosette

Shape SH-WL-HAND1 (SH_WL_HAND1, SHWL-HAND1, SH/WL-HAND1, SH WL-HAND1) Left Wooden Handle Grip for ARRI Rosette Shape is well known for its red push button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustment. By simply pressing the red button, you are allowed a 360 degree rotation to place the handle in the best position for your use. This product combines our new wooden hand grips with our well known patented technology to add a nice natural touch to your rig. This product is compatible with standard ARRI rosettes to install on any SHAPE rig, fixed on either the ARRI Alexa, or the ARRI Amira cameras and all others based on ARRI standard rosettes. It also screws in with a red ratchet knob.The handle offers two points of adjustment for an optimal user comfort. The wooden hand grip was designed with an ergonomic surface to add more confort when you are shooting for long hours. The product is made of Canadian maple hardwood and a high quality varnish top-coat to provide more durability.  

Shape Single Left Telescopic Wooden Handle Grip for ARRI Rosette

Shape SH-WL-HAND3 (SH_WL_HAND3, SHWL-HAND3, SH/WL-HAND3, SH WL-HAND3) Single Left Telescopic Wooden Handle Grip for ARRI Rosette Shape is well known for its push button handle, now used by so many professionals in the industry. They have developed this patented technology to give users quick and easy adjustment. By simply pressing the red button, you are allowed a 360 degrees of rotation to place the handle in the best position for your use.  This product is compatible with standard ARRI rosettes to install on any SHAPE rig, fixed on the ARRI Alexa, and ARRI Amira cameras and all others based on ARRI standard rosettes screw with ratchet red knob. The Telescopic Handles have 4 points of adjustment on each handle; one with the ARRI rosette that is attached to the camera's baseplate, two push buttons with 360 degree rotation and one red knob screw to adjust the length. The length is adjustable up to 1,5 additional inches (3,81 cm), and it also gives you the possibility to rotate the arm on the inside to change the grip position and place it inside for a more centred position. This product combines the new wooden hand grips with the well known patented technology to add a nice natural touch to your rig. The wooden hand grip was designed with an ergonomic surface to add more comfort when you are shooting for long hours. The product is made of Canadian maple hardwood and a high quality varnish top-coat to provide more durability. It is also made in Canada and covered by a Lifetime warranty on wood parts and CNC machined parts.

Shape Double Telescopic Wooden Handle Grips for ARRI Rosettes

Shape SH-W-HAND12 (SH_W_HAND12, SHW-HAND12, SH/W-HAND12, SH W-HAND12) Double Telescopic Wooden Handle Grips for ARRI Rosettes Shape is well known for its push button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustments. By simply pressing the red button, you are allowed a 360 degrees of rotation to place the handle in the best position for your use. This product is compatible with standard ARRI rosettes to install on any Shape rig, fixed on the ARRI Alexa, and ARRI Amira cameras and all others based on the ARRI standard rosettes, screws with a ratcheting red knob. The Telescopic Handles have 4 points of adjustment on each handle; one with the ARRI rosette that is attached to the camera's baseplate, two push buttons with 360 degree rotational handles and one red knob screw to adjust the length. The length is adjustable up to 1,5 additional inches (3,81 cm), and also gives you the possibility to rotate the arm on the inside to change the grip position and place it inside for a more centred position. This product combines our new wooden hand grips with our well known patented technologyto add a nice natural touch to your rig. The wooden hand grip was designed with an ergonomic surface to add more confort when you are shooting for long hours. The product is made of Canadian maple hardwood and a high quality varnish top-coat to provide more durability. It is also made in Canada and covered by our Lifetime warranty on wood parts and CNC machined parts.

Shape Canon C100/C300/C500 Offset Rig

Shape SH-C100-OF (SHC100-OF, SH/C100-OF, SH C100-OF, C100-OF, sh-c100-of) Canon C100/C300/C500 Offset Rig The Shape Canon C100/C300/C500 Offset Rig is for handheld shooting and specifically designed to work with the Canon Cinema EOS line of cameras, using the included baseplate. The rig allows you to position your camera in front of your eyes, while supporting it with your shoulder. It includes Shape's C100/C300/C500 baseplate which features 15mm rod clamps with spring-loaded levers and 12" 15mm rods. The baseplate maintains the proper lens center to rod height for use with available rod mounted accessories. The included Quick Handle Rod Bloc is a rod mounted handgrip assembly that mounts to LWS 15mm rods. It features Shape's push button rosette release, which allow you to adjust the angle of the handgrips without having to remove your hands from the rig. The offset bracket shifts the weight of the camera to your shoulder and provides rod brackets for attaching rods and the shoulder pad, as well as available accessories. The included Back Pad attaches to the back of the shoulder pad and features sliding height adjustment for your comfort and a 1/4"-20 threaded hole for mounting additional accessories. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Baseplate for Canon C300 Camera The Shape C300 Baseplate is made specifically for the Canon EOS C300 Camera. This camera accessory provides a small, light setup solution expandable to a more elaborate setup. It features a pair of 15mm rods that are 12" long through the length of the baseplate. This baseplate attaches underneath the camera with 4 x M4 screws or with 3/8”-16 and 1/4”-20 screws that are included. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Off-Set Bracket for Blackmagic Cage The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount.

Shape Telescopic Handles with ARRI Rosettes (Black & Red)

Shape SH-HAND12 (SH_HAND12, SHHAND12, SH/HAND12, SH HAND12) Telescopic Handles with ARRI Rosettes (Black & Red) Shape is well known for its push button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustments. By simply pressing the red button, you are allowed 360 degrees of rotation to place the handle in the best position for your use.  This product is compatible with standard ARRI rosettes to install on any SHAPE rig, fixed on the ARRI Alexa, and ARRI Amira cameras and all others based on the ARRI standard rosettes, screws with a ratcheting red knob. The Telescopic Handles have 4 points of adjustment on each handle; one with the ARRI rosette that is attached to the camera's baseplate, two push buttons with 360-degree rotational handles and one red knob screw to adjust the length. The length is adjustable up to 1,5 additional inches (3,81 cm), and also gives you the possibility to rotate the arm on the inside to change the grip position and place it inside for a more centred position. This product combines our new wooden hand grips with our well-known patented technology to add a nice natural touch to your rig. The wooden hand grip was designed with an ergonomic surface to add more comfort when you are shooting for long hours. The product is made of Canadian maple hardwood and a high-quality varnish top-coat to provide more durability. It is also made in Canada and covered by our Lifetime warranty on wood parts and CNC machined parts.