Dedolight DSC3 Soft case, small for DLED10-LEDRAPTOR 3 kits

Dedolight DSC3 (DSC_3, DSC-3, DSC/3, DSC 3) Soft case, small for DLED10-LEDRAPTOR 3 kits The DSC3 soft case is built to carry one full light set of the DLED10 or Ledraptor3 soft light (light, ballast, cable), along with the 3' reflective dome, diffusers and optional egg crate grid, should you have it. It's a great solution for protecting your equipment for longevity and extending its life span. For a soft case it's built tough, with velcro sectional inserts for adjusting your kits layout as needed and on-the-fly. This bag has three flat compartments for adding other accessories. It's possible to put a flat folding light stand in the back compartment.   

Dedolight DSCM2 Soft case, mono, large.

Dedolight DSCM2 (DSCM_2, DSCM/2, DSCM 2, DSCM-2) Soft case, mono, large.  Dedolight Soft Mono Bag Large

Dedolight DPBA-L18 Parallel Beam intensifier LED monocolor, 18cm diameter Fits DLED12-D, DLED30-D.

Dedolight DPBA-L18 (DPBA L18, DPBA_L18, DPBAL18, DPBA/L18) Parallel Beam intensifier LED monocolor, 18cm diameter Fits  DLED12-D, DLED30-D. This DPBA-L18 Parallel Beam Intensifier increases light output up to 44% (DLED12-D). Simply used by sliding in at the light's accessory slot and adjusting to the flood position; the new beam generated by this lens is anywhere from 6°- 8°, depending on light model used. Parallel Beam Intensifiers, unique only to dedolight focusing lights, make using multiple Lightstream reflectors from one light source possible, as well as establishes a controlled virtual light source from the reflecting surface. "Lightstreaming" with Parallel Beam Intensifiers completely brings the reflectors to life in a systematic way with undeniably beautiful results. This tool provides a powerful new function your dedolight which nothing else can do on the market.       

Dedolight DLED2-BC2 7.2 V Canon battery shoe for Canon Video Battery BP 808, 809, 819

Dedolight DLED2-BC2 (DLED2/BC2, DLED2_BC2, DLED2BC2, DLED2 BC2) 7.2 V Canon battery shoe for Canon Video Battery BP 808, 809, 819 Power the DLED2 LED light with this Canon BP Battery Plate from Dedolight. The plate accepts one Canon BP 808, 809, or 819 battery                

Dedolight DPL85M Projection Lens 85mm / f2.8 with Metal Mount

Dedolight DPL85M (DL-DPL85M, DL/DPL85M, DL_DPL85M, dpl85m) Projection Lens 85mm / f2.8 with Metal Mount Dedolight projection lenses are specifically designed for the dedolight system. They are high quality lenses with metal barrels designed to withstand high heat.

Dedolight DLOBML-PBN2 Nikon Photo Battery EN-EL15 Shoe for Mini On-board LED Light Head

Dedolight DLOBML-PBN2 (DLOBML/PBN2, DLOBML_PBN2, dlobml-pbn2) Nikon Photo Battery EN-EL15 Shoe for Mini On-board LED Light Head This DLOBML-PBN2 Ledzilla-Series Battery Shoe from Dedolight accepts a Nikon EN-EL15 battery and allows it to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head. It delivers power through a built-in cable with a DC power connector, and features a screw-in configuration for secure attachment to a compatible light head. A modular, swappable design allows it to be easily substituted with other Dedolight Ledzilla-series battery shoes which can accommodate other battery models. Accepts a Nikon EN-EL15 battery and allows it to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head Screw-in configuration for secure attachment to a compatible light head Modular, swappable design for easy substitution with other Dedolight Ledzilla-series battery shoes which can accommodate other battery models

Dedolight DLOBML-PBN1 Nikon Photo Battery EN-EL3E Shoe for Mini On-board LED Light Head

Dedolight DLOBML-PBN1 (DLOBML/PBN1, DLOBML_PBN1, dlobml-pbn1) Nikon Photo Battery EN-EL3E Shoe for Mini On-board LED Light Head This DLOBML-PBN1 Ledzilla-Series Battery Shoe from Dedolight accepts a Nikon EN-EL3e battery and allows it to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head. It delivers power through a built-in cable with a DC power connector, and features a screw-in configuration for secure attachment to a compatible light head. A modular, swappable design allows it to be easily substituted with other Dedolight Ledzilla-series battery shoes which can accommodate other battery models. Accepts a Nikon EN-EL3e battery and allows it to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head Screw-in configuration for secure attachment to a compatible light head Modular, swappable design for easy substitution with other Dedolight Ledzilla-series battery shoes which can accommodate other battery models

Dedolight DLOBML-PBC1 Canon Photo Battery LP-E6 Shoe for Mini On-board LED Light Head

Dedolight DLOBML-PBC1 (DLOBML_PBC1, DLOBML/PBC1, dlobml-pbc1) Canon Photo Battery LP-E6 Shoe for Mini On-board LED Light Head This DLOBML-PBC1 Ledzilla-Series Battery Shoe from Dedolight accepts a Canon LP-E6 battery and allows it to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head. It delivers power through a built-in cable with a DC power connector, and features a screw-in configuration for secure attachment to a compatible light head. A modular, swappable design allows it to be easily substituted with other Dedolight Ledzilla-series battery shoes which can accommodate other battery models. Accepts a Canon LP-E6 battery and allows it to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head Screw-in configuration for secure attachment to a compatible light head Modular, swappable design for easy substitution with other Dedolight Ledzilla-series battery shoes which can accommodate other battery models

Dedolight DLOBML-BSV NP-FV Battery Shoe for Mini On-board LED Light Head

Dedolight DLOBML-BSV (DLOBML/BSV, DLOBML_BSV, dlobml-bsv) NP-FV Battery Shoe for Mini On-board LED Light Head Dedolight Battery Shoe for 7.2V Sony NP-FV Battery Review Accepts a Panasonic VW-VBD1 battery or a 7.2V Sony NP-F series battery, and allows one of them to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head. It delivers power through a built-in cable with a DC power connector, and features a screw-in configuration for secure attachment to a compatible light head.

Dedolight DLOBML-PBP1 7.2V Panasonic photo battery shoe for DMW-BLF19E batteries

Dedolight DLOBML-PBP1 (DLOBML/PBP1, DLOBML_PBP1, dlobml-pbp1) 7.2V Panasonic photo battery shoe for DMW-BLF19E batteries The Dedolight Ledzilla Shoe is specially designed for Panasonic 7.2V Photo DMW-BLF19E Battery.

Dedolight DLED2-BSU Battery Shoe for Sony BPU-60 Battery

Dedolight DLED2-BSU (DLED2/BSU, DLED2_BSU, dled2-bsu) Battery Shoe for Sony BPU-60 Battery The Battery Shoe for Sony BPU-60 Battery for DLED2.1-BI from Dedolight allows the DLED 2.1 LED fixture to run on Sony BPU-60 type batteries.

Dedolight DLOBML-BC DV Battery Canon BP-9 Shoe for Mini On-board LED Light Head

Dedolight DLOBML-BC (DLOBML/BC, DLOBML_BC, dlobml-bc) DV Battery Canon BP-9 Shoe for Mini On-board LED Light Head This DLOBML-BC Ledzilla-Series Battery Shoe from Dedolight accepts a 7.2V Canon BP-9 series battery and allows it to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head. It delivers power through a built-in cable with a DC power connector, and features a screw-in configuration for secure attachment to a compatible light head. A modular, swappable design allows it to be easily substituted with other Dedolight Ledzilla-series battery shoes which can accommodate other battery models. Accepts a 7.2V Canon BP-9 series battery and allows it to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head Screw-in configuration for secure attachment to a compatible light head Modular, swappable design for easy substitution with other Dedolight Ledzilla-series battery shoes which can accommodate other battery models

Dedolight DLOBML-BP Ledzilla-Series Battery Shoe for 7.2V Panasonic CGA-Series Battery

Dedolight DLOBML-BP (DLOBML/BP, DLOBML_BP, dlobml-bp) Ledzilla-Series Battery Shoe for 7.2V Panasonic CGA-Series Battery This DLOBML-BP Ledzilla-Series Battery Shoe from Dedolight accepts a 7.2V Panasonic CGA-series battery and allows it to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head. It delivers power through a built-in cable with a DC power connector, and features a screw-in configuration for secure attachment to a compatible light head. A modular, swappable design allows it to be easily substituted with other Dedolight Ledzilla-series battery shoes which can accommodate other battery models. Accepts a 7.2V Panasonic CGA-series battery and allows it to power a Ledzilla, Ledzilla 2, Ledzilla BI, iRedZilla, or FluoresZilla on-board light head Screw-in configuration for secure attachment to a compatible light head Modular, swappable design for easy substitution with other Dedolight Ledzilla-series battery shoes which can accommodate other battery models

Dedolight DLED2-BP Battery Shoe for Panasonic CGA Battery

Dedolight DLED2-BP (DLED2/BP, DLED2_BP, dled2-bp) Battery Shoe for Panasonic CGA Battery Dedolight Battery Shoe for Panasonic CGA Battery Review

Dedolight DPOW4X150-2 light head Cable to power supply

Dedolight DPOW4X150-2 (DPOW4X150/2, DPOW4X150_2, dpow4X150-2) light head Cable to power supply This 6.6' Light Head Cable from Dedolight allows users to connect the DLH4x150S light head to a power supply.

Dedolight DLPS36-100 AC Power Supply for DT7 and DT9 BI-BAT-AB DC Ballasts

Dedolight DLPS36-100 (DLPS36/100, DLPS36_100, dlps36-100) AC Power Supply for DT7 and DT9 BI-BAT-AB DC Ballasts The AC Power Supply for DT7 and DT9 BI-BAT-AB DC Ballasts from Dedolight is used to provide 100 to 240 VAC current to the BI-BAT-AB DC ballasts that drive the DLED7 and DLED9 bi-color LED lights.

Dedolight DPOW4X150-8 26' Light Head Cable for DLH4x150S

Dedolight DPOW4X150-8 (DPOW4X150/8, DPOW4X150_8, dpow4X150-8) 26' Light Head Cable for DLH4x150S This 26' Light Head Cable from Dedolight allows users to connect the DLH4x150S light head to a power supply.

Dedolight DPL50M 50mm f/2.8 Projection lens for DP1.1, DP2.1, DP1S and DP2S Imagers

Dedolight DPL50M (DL-DPL50M, DL/DPL50M, DL_DPL50M, dpl50m) 50mm f/2.8 Projection lens for DP1.1, DP2.1, DP1S and DP2S Imagers Produce a defined light with a clean shadow and contrast with this 50mm Projection Lens from Dedolight. Designed for the DP1- and DP2-series imagers, this lens will help you control the beam angle and focus the light. It also features a large f/2.8 aperture to ensure a high light output. And, thanks to a durable all-metal and heat-resistant construction, users will be able to use it without worry on their light heads.

Dedolight DPLZ150M 85-150mm f/3.5 Zoom Projection Lens

Dedolight DPLZ150M (DL-DPLZ150M, DL/DPLZ150M DL_DPLZ150M, dplz150m) 85-150mm f/3.5 Zoom Projection Lens Projection lenses are specifically designed for the Dedolight system. They are high quality lenses with metal barrels designed to withstand high heat.

Dedolight DT4-BAT DC electronics for DLED4-D

Dedolight DT4-BAT (DT4/BAT, DT4_BAT, dt4-bat) DC electronics for DLED4-D 100-0Percent dimmable ballast with a D-Tap connector. Input is 10.2-18.0 VDC. (Approx. DDCC Cable or DLPS12-60 Power Supply Required)

Dedolight DP2S Imager Projection attachment with built-in framing shutter blades

Dedolight DP2S (DL-DP2S, DL/DP2S, DL_DP2S, dp2s) Imager Projection attachment with built-in framing shutter blades DP2S is manufactured with fixed framing shutters for to provide absolute precision – clean, and wide even field down to the facet of a diamond. The Dedolight Imager Projectors take Inchpainting with light Inch to a new level.

Dedolight DT2-BI-BAT DC Ballast for DLED2.1Y-BI / DLED2.1YHSM-BI Bicolor Lamp Heads

Dedolight DT2-BI-BAT (DT2/BI/BAT, DT2_BI_BAT, dt2-bi-bat) DC Ballast for DLED2.1Y-BI / DLED2.1YHSM-BI Bicolor Lamp Heads Separate DC electronics for DLED2Y-BI and DLED2YHSM-BI light heads to use with 12V or 24V batteries to be used with LEDZILLA cables. DDCC Cable or DLPS12-30 Power Supply Required, This DC Ballast for DLED2.1Y-BI / DLED2.1YHSM-BI Bicolor Lamp Heads is a dimmable bicolor ballast that also provides continuous variable color temperature from 2,800 to 6,000K. Input is 6-18 VDC.

Dedolight DT9-BAT-AB DC electronics for Daylight and Tungsten to use with batteries

Dedolight DT9-BAT-AB DC (DT9/BAT/AB, DT9_BAT_AB, dt9-bat-ab) electronics for Daylight and Tungsten to use with batteries Dimmable DC Power Supply for DLED9 Daylight and Tungsten Lamp Heads with Anton Bauer D-Tap Connector. (Approx. DDTAP Cable or DLPS36-100 Power Supply Required)