Slik Carbon fibre tripod legs with three twist lock leg sections

Slik Carbon fibre tripod legs with three twist lock leg sections (SLI3303) 5 Year Warranty Included The Slik PRO CF-733 is a full size tripod extending to over 1.6m and folds down to a compact about 57cm.  Though lightweight (1.3kgs) the PRO CF-733 handles up to 5kgs.  Use this tripod with advanced enthusiast and professional camera bodies and/or heavy lenses.  All 700 series carbon fiber tripods have legs made up of carbon fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber.  The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground.   The three leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup.

Slik Pro CF-833 Tripod Legs 3309

The SLIK PRO CF-833 has three leg sections that when fully extended reach a height of over 1.7m but when completely retracted the tripod is about 600mm in length. It has a weight of just 1.55kgs but is capable of handling 7kgs of properly balanced equipment. So the SLIK PRO CF-833 would be usable with the highest number of tripod heads from SLIK and others the tripod has an industry standard 3/8 mount post that is reversible to 1/4-20. The 800 series carbon fibre tripods all have legs made up of carbon fibre material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fibre.  The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground.The three leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup. 

Slik 3-Way Pan Head

Slik 3-Way Pan Head(3402) 3-way pan head offers separate controls: tilt (up and down), pan (left and right), and horizon leveling (landscape and portrait orientation). This provides more precise adjustments on one axis while not affecting the other two axis for accurate framing of the object. The SLIK SH-747 is a 3-way pan and tilt head equipped with a newly designed “Arca-Swiss” compatible platform which is 90 deg. rotatable. It allows you to mount the Arca-Swiss quick-release plate to face sideways and forwards. It is a useful feature for cameras with L-bracket, and a field scope or telephoto lens that requires fore-aft COG adjustment. In addition, the rotation function can tilt the camera directly above and below. FEATURES ROTATABLE QRS PLATFORM 90 deg. rotatable ”Arca-Swiss” compatible QRS platform allows a camera to be mounted perpendicular to or parallel to the tilting direction of the pan head. It is a very useful feature when replacing a camera with an L-bracket from a single-focus lens to a super telephoto lens with a mounting arm. SHORT VERTICAL TILT KNOB By replacing the vertical pan handle to a short knob, there is no need to remove the vertical pan handle when storing the tripod in the bag. Of course, a vertical pan handle is also included in the package, if you want to operate the pan head in the conventional style. DUAL BUBBLE LEVELER Equipped with dual bubble levelers that can set the horizontal level of the camera when the platform is set to a horizontal position or a vertical position.

Slik Pro 700DX Leg

Slik Pro 700DX Leg(3366) The SLIK PRO 700DX LEG can handle the weight of a professional full-frame DSLR camera with a heavy long telephoto lens. It offers photographers the strength and stability they need on flat and uneven surfaces. SLIK’s exclusive AMT super titanium alloy legs make the PRO 700DX tripod rock steady yet lighter than its competitors with similar max weight capacities.   “What’s so great about AMT alloy?” It has 40% greater strength to weight ratio than standard aluminum. The legs weigh less and are stronger than the standard aluminum used in most of today’s tripods. All at a price you cannot beat.   Note, the PRO 700DX is full-sized, with just the legs extended and the center column down the camera is already at eye level for most people.   Raise the smooth gearless center column to its maximum height and your camera is more than 1,700mm off the ground!

Slik Arca-type Ball Head PBH-635AC

Slik Arca-type Ball Head(3490) The compact professional SLIK PBH-635AC is an Arca-type compatible ball head designed for photographers on the go. The 635AC features a slim profile, weighs 1.07 lbs, includes a universal Arca-type quick release platform so you can use just about any Arca style quick release plate, L-bracket, and is even compatible with backpack "Clip" design plates. It includes 3 control knobs to control the functions of the head. Large Lock/Release Knob to control framing Tension knob to control the friction of the ball movement Pan Knob controls 360° panning left and right independent of the ball movement The lock release knob is also spring loaded. Simply pull the knob away from the head and rotate it to the desired position. The head includes a single U-notch for greater flexibility of camera position. You can point the camera straight up or down and shoot horizontal and vertical frames.   The 635AC has a load capacity of 13.2 lbs and is capable of supporting full-sized professional cameras and lenses.

Slik Arca-type Ball Head

Slik Arca-type Ball Head(3489) The compact professional SLIK PBH-535AC is an Arca-type compatible ball head designed for photographers on the go. The 535AC features a slim profile, weighs 13.4 ounces, includes a universal Arca-type quick release platform so you can use just about any Arca style quick release plate, L-bracket, and is even compatible with backpack "Clip" design plates. It includes 3 control knobs to control the functions of the head. Large Lock/Release Knob to control framing Tension knob to control the friction of the ball movement Pan Knob controls 360° panning left and right independent of the ball movementThe lock release knob is also spring-loaded. Simply pull the lock knob away from the head and rotate it to your preferred placement. The head includes a single U-notch for greater flexibility of camera position. You can point the camera straight up or down and shoot horizontal and vertical frames. The 535AC has a load capacity of 11 lbs and is capable of supporting full-sized professional cameras and lenses.

Slik Pro 400DX Leg

Slik Pro 400DX Leg - 3381 The perfect, sturdy first tripod for those who want to get serious about photography, the SLIK PRO 400DX is an all-metal tripod suitable for DSLR and medium format cameras.  Speed release leg locks make it a breeze to set up and take down. The soft grip padded legs and folded length of 580mm make this lightweight tripod easy to carry. 3 position leg angle locks allow lowering the tripod for macro photography work. It also has a short center column built in, just unscrew the column into two pieces and it becomes 165mm shorter.   

Slik GX 640 Tripod With Ball Head

Slik GX 640 Tripod With Ball Head - 3348 The Slik GX 640 BH is a full-size photo tripod, complete with a Ball-Head and it weighs in at just 1.09kg. With a folded length of 46.5cm, the 4-section legs, with oversized flip-lock levers, allow it to extend up to 155cm and work as low as 47cm. The GX 640 BH features anti-slip, rubber-tipped feet and the geared centre column (with crank handle), allows precise height adjustment. The legs feature lockable bracing, which allows leg angle to be adjusted and provides maximum stability. There is also a built-in bubble-level to ensure everything is straight. A carrying case is included.

Slik Mini-Pro 7

Mini-Pro 7 - 3455 The SLIK Mini-PRO 7 is a high performance tabletop tripod for comfortable macro photography. The main body part is aluminum die-cast, three-step high performance tabletop tripod legs.  It comes with ball head SBH-150DQ.  If you install the attached extension pole, it is possible to give a certain height from the narrow space, ideal for small-sized shooting at the tabletop.

Slik 504QF II Head

504QF II Head - 3413 The SLIK 504 QF-II head has a solid 2-way fluid pan head incorporating an easy to grip pan handle with full angle adjustments. The pan handle is long enough to give excellent leverage for smooth panning. The built-in bubble level at the base of the head allows quick and accurate leveling. The head also has a video quick release plate for fast mounting and un-mounting of the camera.

Slik Sliding Arm II

Sliding Arm II - 3467 SLIK Sliding Arm II is a horizontal column which can be mounted onto a tripod. Attaching a head on the tip of the column allows you to shoot straight downwards giving a “bird’s eye” view. Rosset clamp will securely hold the sliding arm at any angle position. This is quite popular accessory for cooking video.

Slik GX 640 Video Tripod

Slik GX 640 Video Tripod - 3349 Light in weight but heavy in value: The SLIK GX 640 VIDEO is a full-size video tripod, complete with 2-way video head and it weighs in at just 1.29kg. With a folded length of 50cm, the 4-section legs, with oversized flip-lock levers, allow it to extend up to 158cm and work as low as 47.7cm. The GX 640 VIDEO features anti-slip, rubber-tipped feet and the geared centre column (with crank handle), allows precise height adjustment. The legs feature lockable bracing, which allows leg angle to be adjusted and provides maximum stability. A built-in bubble-level ensures everything is straight. There is also a DIN standard quick-release shoe (with spring-loaded locating pin) which allows quick access to your camera, without the hassle of having to unscrew the camera from your tripod. A carrying case is included.

Slik PBH-635AS Ball Head

PBH-635AS Ball Head 3486 The compact professional SLIK PBH-635AS ball head has newly desgined “Cam Lock” Arca-Swiss type quick release systems for easy mounting the camera. “Cam Lock” quick release system allows user to attach or detach a camera from top of the platform and no need to slide in or out the plate from the groove. The PBH-635AS ball head has a capacity of 6kgs. features a separate pan lock that locks the ball into place while allowing the head to rotate 360 degrees. Its tension knob controls the rate of the ball’s movement. The head is capable of handling a full sized professional DSLR with standard lens. In addition to the standard easy grip ball lock lever the head has a tension adjustment knob to fine-tune the drag on the ball movement. It also has a separate panoramic lock with degree markings around the base for stitching together for panoramic photos.

Slik SH-737HD Fluid Head

Slik SH-737HD FLUID HEAD 3410 The SLIK SH-737HD is a smooth-moving fluid effect 3-way pan head. It has a quick release plate for easy mounting and removal of a DSLR or video camera. The all-metal head allows dual photo and video use and moves in two directions like a professional video head. The SLIK SH-737HD also has pan and tilt drag controls that are separate from the the pan/tilt handle locks. This allows the photographer to fine-tune the tightness (drag) of the movement based on the weight of the camera and lens.  The head can also hold up to 5.0kg of equipment.

Slik SVH-501

 SVH-501, 3411 The SVH-501 is a compact sized fluid head, weighing in at 540g and capable of supporting 3.0kg of gear in any position while providing smooth pan and tilt movements. The head provides the right amount of resistance when moving the head so your video movements are smooth and your animal tracking is easy. The angled pan handle can be rotated a full 360-degrees so the handle’s angle is in the best position for your situation. The head includes a 70mm Arca-type quick release plate that can be mounted from the top of the head. The locking knob is large and easy to access with the camera mounted.  It also includes a retractable safety stopper to prevent the plate from sliding off the head in the event you forget to tighten down the plate. The safety stopper can also be rotated out of the way to make using a 3rd party Arca-type camera plate.

Slik VIDEO SPRINT III

VIDEO SPRINT III, 3438 3rd generation travel tripod; SPRINT PRO III series incorporates well-accepted  SLIK original R.F.M. (Rapid Flip Mechanism) for quick and easy leg opening adjustment.  The SPRINT line of tripods can greatly improve photo by stabilizing your camera, which is critically important for sharp pictures. These all-metal tripods have strength combined with compact size to travel with ease. The full size tripod with exclusive fliction video head. Quick release shoe for easy mounting and removal of camera. 

Slik PRO AL-323DX

PRO AL-323DX, 3287 Compact travel tripod with 3 way head

Slik PRO AL-324DX

PRO AL-324DX, 3288 The SLIK PRO AL-300 series compact travel tripod makes an excellent traveling companion for your point-and shoot camera or light-weight Digital SLR.  The PRO AL-324DX is a successor model of the best-selling PRO 340DX.  The new series reduce vibration and increase the torsion strength through a re-engineered tripod collar and leg joint. The new series features SLIK original R.F.M. (Rappid Flip Mechanism) that provides an easy way to adjust the leg angle, a bubble level for easy horizon correciton and an accessory hole that will accept your choice of extension arms for mounting monitors, lights tablets or other photographic accessories. The PRO AL-324DX includes the SH-705E 3-way Pan Head which has separate lock controls for every movement from horizontal to vertical camera orientation.  It also has a quick release plate for fast mounting of a camera.

Slik PRO POD CF-834

PRO POD CF-834, 3433 The SLIK PRO POD CF-834 is compact and durable monopod and is excellent for shooting sporting events or in small venues where a tripod will not fit or is not allowed. This monopod can handle long telephoto lens such as 300mm /2.8 or larger and making it a great tool to have around if you like to shoot sports, wild life and travel. Made from an advanced 8X multi-layered carbon fibre material, which is approximately 40% lighter, but just as rigid as the equivalent aluminium. This monopod uses SLIK Speed Release lever locks to make extending and retracting the 4 leg sections a breeze. The SLIK PRO POD CF-834 weighs 500g! (not including a head) It also retracts to 500mm in length. It’s small size and featherweight makes it a natural on any photo backpack, you almost forget it’s there! If you need to move around a lot to different locations but need some extra support the SLIK PRO POD CF-834 is a great option for staying mobile. The speed release lever locks make it a breeze to set up and pack away.

Slik ABLE 300DX

ABLE 300DX, 3395 Built with photo enthusiasts and students in mind, the SLIK ABLE 300DX is a durable tripod with classic features. The legs of the ABLE 300DX extend and retract securely, loosen and tighten the leg lock knob to extend or shorten them. 3 position adjustable angle leg locks make for easy set up on uneven ground or steps. These leg locks also allow you to lower the height of the tripod. Combined with the SLIK ABLE 300DX Short Column and the tripod can be lowered to 470mm for low angle or macro photography. For even lower angle photography the standard gearless center column can be reversed so the head is at the bottom of the center column. This gives you the ability to photograph with the camera just a few inches off the ground. The tripod kit comes with the ABLE 300DX Pan Head, a compact and all-metal, this head has the strength and durability to handle many digital and 35 mm cameras and lenses. The 3-way pan head has a metal quick release plate that positively locks into the head. One lever operation of the quick release lock allows fast mounting and un-mounting of the camera.

Slik 504QF II

504QF II, 3412 Looking for a tripod that is good for both video and still photography?  Do you have a 75-300mm lens and want to a head that is good to use for tracking players while you shoot sports?  The Slik 504QF-II Video tripod is good at both.  It comes complete with a solid SLIK 2-way fluid pan head incorporating an easy to grip pan handle with full angle adjustments. The panhandle is long enough to give excellent leverage for smooth panning. There is a bubble level built into the base of the head quick leveling after set up. The head also has a video quick release plate for fast mounting and un-mounting of the camera. The 504QF-II shares it tripod legs with the ABLE 300DX.  They are easy to set up and fold down securely.   Simply loosen and tighten the leg lock knob to extend or shorten them. 3 position leg locks make for easy set up on uneven ground or steps. Combine it with the 504 QF II / 300DX Short Column and it lowers to 450mm for low angle or macro videography. This lightweight video tripod weighs 2.57kg and folds down to 690mm. It’s an excellent tripod to take on location. 

Slik PRO AL-323BH4

PRO, AL-323BH4, 3289 The SLIK PRO AL-300 series compact travel tripod makes an excellent traveling companion for your point-and shoot camera or light-weight Digital SLR.  The PRO AL-323BH4 is a new addition to the best-selling PRO 330DX.  The new series reduce vibration and increase the torsion strength through a re-engineered tripod collar and leg joint. The new series features SLIK original R.F.M. (Rappid Flip Mechanism) that provides an easy way to adjust the leg angle, a bubble level for easy horizon correciton and an accessory hole that will accept your choice of extension arms for mounting monitors, lights tablets or other photographic accessories. The PRO AL-323BH4 includes the SBH-400AS ball head with “Cam Lock” Arca Swiss type quick release. This head has an easy grip ball lock lever. There is a separate panoramic lock on the base, locking the level or angle of the ball but allowing the camera to pan.  There are also 360 degree markings around the base for taking photos to stitch together for panoramic shots.

Slik PRO 400DX

PRO 400DX, 3380 The perfect, sturdy first tripod for those who want to get serious about photography, the SLIK PRO 400DX is an all-metal tripod suitable for DSLR and medium format cameras. Speed release leg locks make it a breeze to set up and take down. The soft grip padded legs and folded length of 650mm make this lightweight tripod easy to carry. 3 position leg angle locks allow lowering the tripod for macro photography work. It also has a short center column built in, just unscrew the column into two pieces and it becomes165mm shorter.

Slik PRO AL-324BH4

PRO AL-324BH4, 3290 The SLIK PRO AL-300 series compact travel tripod makes an excellent traveling companion for your point-and shoot camera or light-weight Digital SLR.  The PRO AL-324BH4 is a new addition to the best-selling PRO 340DX.  The new series reduce vibration and increase the torsion strength through a re-engineered tripod collar and leg joint. The new series features SLIK original R.F.M. (Rappid Flip Mechanism) that provides an easy way to adjust the leg angle, a bubble level for easy horizon correciton and an accessory hole that will accept your choice of extension arms for mounting monitors, lights tablets or other photographic accessories. The PRO AL-324BH4 includes the SBH-400AS ball head with “Cam Lock” Arca Swiss type quick release. This head has an easy grip ball lock lever. There is a separate panoramic lock on the base, locking the level or angle of the ball but allowing the camera to pan.  There are also 360 degree markings around the base for taking photos to stitch together for panoramic shots.

Slik PRO AL-523DX

PRO AL-523DX, 3292 The SLIK PRO AL-500 series medium size tripod are capable of handling the weight of a professional full-frame DSLRs or mirrorless cameras with heavy lenses. The PRO AL-523DX is a successor model of the best-selling PRO 500DX. The new series reduce vibration and increase the torsion strength through a re-engineered tripod collar and leg joint. The new series features SLIK original RFM (Rappid Flip Mechanism) that provides an easy way to adjust the leg angle, a bubble level for easy horizon correciton and an accessory hole that will accept your choice of extension arms for mounting monitors, lights tablets or other photographic accessories. The PRO AL-523DX includes the ABLE 300DX 3-way Pan Head which has separate lock controls for every movement from horizontal to vertical camera orientation.  It also has a quick release plate for fast mounting of a camera.

Slik SGH-300

SGH-300, 3488 The SLIK SGH-300 is a compact gimbal head, provides smooth Pan/Tilt tracking of moving subjects, which is an important feature for wildlife photographers, bird watchers, and naturarist. The compact and lightweight design allows for easier transport into remote locations while providing same performance of larger and heavier versions. The SGH-300 supports up to a 3.0kg load yet weights only 800g. This is perfect for full-frame mirrorless and DSLR systems while using popular super-telephoto zoom lenses like the 150-600mm.

Slik PRO 700DX

PRO, 700DX, 3365 SLIK PRO 700DX can handle the weight of a professional full-frame DSLR camera with a heavy long telephoto lens.  It offers photographers the strength and stability they need on flat and uneven surfaces. SLIK’s exclusive AMT super titanium alloy legs make the PRO 700DX tripod rock steady yet lighter than its competitors with similar max weight capacities. “What’s so great about AMT alloy?” It has 40% greater strength to weight ratio than standard aluminum. The legs weigh less and are stronger than the standard aluminum used in most of today’s tripods. All at a price you cannot beat. Note, the PRO 700DX is full-sized, with just the legs extended and the center column down the camera is already at eye level for most people.  Raise the smooth gearless center column to its maximum height and your camera is 1,900mm off the ground! SLIK was also thinking ahead when it designed the head and quick release system.  Instead of being squared off and attaching just one way like other quick releases, the PRO 700DX quick release is circular so the camera can mount quickly facing in any direction you choose.

Slik PRO AL-523BH5

PRO AL-523BH5, 3293 The SLIK PRO AL-500 series medium size tripod are capable of handling the weight of a professional full-frame DSLRs or mirrorless cameras with heavy lenses. The PRO AL-523BH5 is a new addition to the best-selling PRO 500BH5.  The new series reduce vibration and increase the torsion strength through a re-engineered tripod collar and leg joint. The new series features SLIK original R.F.M. (Rappid Flip Mechanism) that provides an easy way to adjust the leg angle, a bubble level for easy horizon correciton and an accessory hole that will accept your choice of extension arms for mounting monitors, lights tablets or other photographic accessories. The PRO AL-523BH5 includes the PBH-523AS ball head with “Cam Lock” Arca Swiss type quick release. This head has an easy grip ball lock lever. There is a separate panoramic lock on the base, locking the level or angle of the ball but allowing the camera to pan.  There are also 360 degree markings around the base for taking photos to stitch together for panoramic shots.

Slik PRO CF-635

PRO CF-635, 3305 The SLIK PRO CF-635 is an easy traveler that can be used in situations where a full-sized tripod would not be needed or not be convenient to carry.  It has four short leg sections that extend to a maximum height of 1,630mm but close down to remarkable 540mm and weighs just of 870g. The 600 series carbon fiber tripods all have legs made up of carbon fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber.  The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground. The PRO CF-635 is equipped with proprietary Speed Release Locks for fast easy set-up and pack-up. These fast easy-to-use lever locks are spring-loaded to hold each section of the tripod legs securely but do not snap-back so there is no pitching of fingers while using them.

Slik PRO CF-633

PRO, CF-633, 3304 The SLIK PRO CF-633 weighs only 900g making it an easy backpacking companion.  It extends to a height of 1,630mm and folds down to a compact 540mm for travel. This tripod handles up to 3kg easily. Use it with high-end mirrorless cameras or professional camera bodies with a variety of lenses.   All 600 series carbon fiber tripods have legs made up of carbon fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber.  The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground. The three leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup. 

Slik PRO CF-634

PRO CF-634, 3306 The SLIK PRO CF-733BH5 carbon fibre tripod is best of both worlds for photographers that want to travel light but still need a sturdy tripod when they get there. This combination features SLIK’s most popular carbon fibre tripod and their most popular professional ball head for excellent portability, and utility.  The PRO CF-733BH5 carbon fibre material yields greater weight reduction while maintaining excellent rigidity and strength. The SLIK PRO CF-733BH5 weighs just over 1.7kg but can reach over 1.7m when fully extended or get as a low as just 307mm of the ground.  The four leg sections mean the tripod retracts to a very small 686mm when closed. The tripod is equipped with proprietary speed release locks for fast easy set-up and pack-up. The compact professional ball head PBH-535AS has a load capacity 5kg. It features newly designed “Cam Lock” Arca-Swiss type quick release system.  It also have separate pan lock that locks the ball into place while allowing the head to rotate 360 degrees. Its tension knob controls the rate of the ball’s movement.

Slik PRO CF-733

PRO CF-733, 3303 The Slik PRO CF-733 is a full size tripod extending to over 1.6m and folds down to a compact about 57cm.  Though lightweight (1.3kgs) the PRO CF-733 handles up to 5kgs.  Use this tripod with advanced enthusiast and professional camera bodies and/or heavy lenses.  All 700 series carbon fiber tripods have legs made up of carbon fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber.  The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground. The three leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup.

Slik PRO CF-734

PRO CF-734, 3307 The Slik PRO CF-734 is a full size tripod extending to over 1.6m and folds down to a compact 47cm.  Though lightweight (1.4kgs) the PRO CF-734 handles up to 5kgs. This makes it a great hiking and backpacking tripod to match with advanced enthusiast and professional camera bodies and/or heavy lenses in the field.  All 700 series carbon fibre tripods have legs made up of carbon fibre material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fibre.  The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground. The four leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup. 

Slik PRO CF-834

PRO CF-834, 3308 The SLIK PRO CF-834 has four leg sections that when fully extended reach a height of over 1.6m but when completely retracted the tripod is just 480mm in length. It has a weight of just 1.65kgs but is capable of handling 7kgs of properly balanced equipment. So the SLIK PRO CF-834 would be usable with the highest number of tripod heads from SLIK and others the tripod has an industry standard 3/8 mount post that is reversible to 1/4-20. The 800 series carbon fibre tripods all have legs made up of carbon fibre material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fibre.  The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground. The four leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup. 

Slik PRO CF-733BH5

 PRO CF-733BH5, 3321 The SLIK PRO CF-733BH5 carbon fibre tripod is best of both worlds for photographers that want to travel light but still need a sturdy tripod when they get there. This combination features SLIK’s most popular carbon fibre tripod and their most popular professional ball head for excellent portability, and utility.  The PRO CF-733BH5 carbon fibre material yields greater weight reduction while maintaining excellent rigidity and strength. The SLIK PRO CF-733BH5 weighs just over 1.7kg but can reach over 1.7m when fully extended or get as a low as just 307mm of the ground.  The four leg sections mean the tripod retracts to a very small 686mm when closed. The tripod is equipped with proprietary speed release locks for fast easy set-up and pack-up. The compact professional ball head PBH-535AS has a load capacity 5kg. It features newly designed “Cam Lock” Arca-Swiss type quick release system.  It also have separate pan lock that locks the ball into place while allowing the head to rotate 360 degrees. Its tension knob controls the rate of the ball’s movement.

Slik PRO CF-734BH5

PRO CF-734BH5, 3320 The SLIK PRO CF-734BH5 carbon fibre tripod is best of both worlds for photographers that want to travel light but still need a sturdy tripod when they get there. This combination features SLIK’s most popular carbon fibre tripod and their most popular professional ball head for excellent portability, and utility.  The PRO CF-734BH5 carbon fibre material yields greater weight reduction while maintaining excellent rigidity and strength. The SLIK PRO CF-734BH5 weighs just over 1.7kg but can reach over 1.7m when fully extended or get as a low as just 306mm of the ground.  The four leg sections mean the tripod retracts to a very small 557mm when closed. The tripod is equipped with proprietary speed release locks for fast easy set-up and pack-up. The compact professional ball head PBH-535AS has a load capacity 5kg. It features newly designed “Cam Lock” Arca-Swiss type quick release system.  It also have separate pan lock that locks the ball into place while allowing the head to rotate 360 degrees. Its tension knob controls the rate of the ball’s movement.

Slik PRO CF-833BH6

PRO CF-833BH6, 3323 The SLIK PRO CF-833BH6 carbon fibre tripod is best of both worlds for photographers that want to travel light but still need a sturdy tripod when they get there. This combination features SLIK’s most popular carbon fibre tripod and their most popular professional ball head for excellent portability, and utility.  The PRO CF-833BH6 carbon fibre material yields greater weight reduction while maintaining excellent rigidity and strength. The SLIK PRO CF-833BH6 weighs just over 2.0kg but can reach over 1.8m when fully extended or get as a low as just 337mm of the ground.  The four leg sections mean the tripod retracts to a very small 686mm when closed. The tripod is equipped with proprietary speed release locks for fast easy set-up and pack-up. The compact professional ball head PBH-635AS has a load capacity 6kg. It features newly designed “Cam Lock” Arca-Swiss type quick release system.  It also have separate pan lock that locks the ball into place while allowing the head to rotate 360 degrees. Its tension knob controls the rate of the ball’s movement.

Slik PRO CF-834BH6

PRO CF-834BH6, 3322 The SLIK PRO CF-834BH6 carbon fibre tripod is best of both worlds for photographers that want to travel light but still need a sturdy tripod when they get there. This combination features SLIK’s most popular carbon fibre tripod and their most popular professional ball head for excellent portability, and utility. The PRO CF-834BH6 carbon fibre material yields greater weight reduction while maintaining excellent rigidity and strength. The SLIK PRO CF-834BH6 weighs just over 2.0kg but can reach over 1.7m when fully extended or get as a low as just 190mm of the ground.  The four leg sections mean the tripod retracts to a very small 566mm when closed. The tripod is equipped with proprietary speed release locks for fast easy set-up and pack-up. The compact professional ball head PBH-635AS has a load capacity 6kg. It features newly designed “Cam Lock” Arca-Swiss type quick release system.  It also have separate pan lock that locks the ball into place while allowing the head to rotate 360 degrees. Its tension knob controls the rate of the ball’s movement.

Slik PRO CF-933

PRO CF-933, 3310 The new SLIK CF-900 series are new addition to existing PRO CF-series (800, 700 & 600) carbon fibre tripod range. The SLIK PRO CF-933 is designed for photographers that use heavy camera equipment but still need to be mobile.  The PRO CF-933 can handle up to 10kgs of equipment but weighs less than 2.4kgs thanks to carbon fibre.  The maximum height is over 2.0m (higher than eye level).  For low angle photography the SLIK PRO CF-933CF has SLIK multi-angle leg locks that allow the angle of each leg to be positioned individually.  This allows the tripod to lowered to 30cm from the ground for low angle or macro photography in the field.

Slik PRO CF-934

PRO CF-934, 3311 The new SLIK CF-900 series are new addition to existing PRO CF-series (800, 700 & 600) carbon fibre tripod range. The SLIK PRO CF-934 is designed for photographers that use heavy camera equipment but still need to be mobile.  The PRO CF-934 can handle up to 10kgs of equipment but weighs less than 2.4kgs thanks to carbon fibre.  The maximum height is over 1.8m (higher than eye level).  For low angle photography the SLIK PRO CF-934 has SLIK multi-angle leg locks that allow the angle of each leg to be positioned individually.  This allows the tripod to lowered below 30cm from the ground for low angle or macro photography in the field.

Slik VARI CF-703

VARI CF-703, 3297 The SLIK VARI series carbon fibre tripod professional bundles is a gem for Hybrid Still and Video photographers. The new VARI series carbon fibre tripods can quickly convert from a traditional carbon fibre center column set-up, a flat base for low angle work and lighter package, to a video bowl base for quick horizon adjustment. In matter of seconds, you can convert your tripod for 1 of 3 specific needs by using the simple tool-free release mechanism. The newly designed 25mm dia. cross-pattern carbon fibre tubes and precision milled aluminum body provides a lightweight system with maximum strength and durability. Weighting in as little as 1,095g (at flat base mode) while supporting 8kgs

Slik VARI CF-704

VARI CF-704, 3298 The SLIK VARI series carbon fibre tripod professional bundles is a gem for Hybrid Still and Video photographers. The new VARI series carbon fibre tripods can quickly convert from a traditional carbon fibre center column set-up, a flat base for low angle work and lighter package, to a video bowl base for quick horizon adjustment. In matter of seconds, you can convert your tripod for 1 of 3 specific needs by using the simple tool-free release mechanism. The newly designed 25mm dia. cross-pattern carbon fibre tubes and precision milled aluminum body provides a lightweight system with maximum strength and durability. Weighting in as little as 1,155g (at flat base mode) while supporting 8kgs.