Matthews Quick Reverse Ear For 1.25" Square Tubing

Matthews Quick Reverse Ear For 1.25" Square Tubing(409500-3) A wide variety of Corners, Connectors, Ears and Pins to use as replacement parts for Butterfly/Overhead frames or use them to make your own custom size frame.

Matthews Stainless Steel Wire Diffusion, 10"

Matthews Stainless Steel Wire Diffusion, 10"(455409E) Matthews Stainless Wire Diffusion (Stainless Steel) is impervious to rust and holds up well under uneven, intense heat, thus making it preferable for use with open face or Fresnel lighting fixtures.

Matthews Stainless Steel Diffusion - 21" Set of 5

Matthews Stainless Steel Diffusion - 21" Set of 5(455418E) Wire diffusion is impervious to rust and holds up better under uneven, intense heat, making it preferable for use with open face non Freznel lighting fixtures. They may be stacked to achieve limitless variation of light intensity. This is a set of 5 scrims: 1 each: Full Single, Half Single, Half Double   2 each: Full Double  

Matthews Half Double Stainless Steel Diffusion Scrim (29")

Matthews Half Double Stainless Steel Diffusion Scrim (29")(435253E) This 29" Half Double Stainless Steel Diffusion Scrim from Matthews is impervious to rust and holds up better under uneven, intense heat, making them preferable for use with open face, non-Fresnel lighting fixtures. Matthews scrims may be stacked to achieve limitless variation of light intensity.   Scrims do not affect the color temperature and produce no electronic interference. They may be stacked to achieve limitless variation of light intensity. The outer edges are color keyed for rapid identification. Green: single, Green with silver: half single, Red: double, and Red with silver: half double. Halves are employed to reduce a portion of the beam and are commonly used when the light is striking the plane of the subject or background for an angle.

Matthews 299705 Saddle Bag - 35 lb

Matthews 299705 Saddle Bag - 35 lb(299705) Matthews Sandbags  are used for securing the bases of light stands and set walls. This Matthews 35 lb saddle style sandbag has two wings and a handle, to allow easy draping over Century and light stand legs, and set flats.

Matthews Dutti Dolly Universal Stand Bracket

Matthews Dutti Dolly Universal Stand Bracket(395400-15) The Dutti Dolly Universal Stand Bracket from Matthews is used to support 0.75 to 2.25" diameter round or square track sections. It can be mounted on stands that have a baby or junior pin using an included receiver, or used on flat surfaces. The stand is designed specifically for use with the Dutti Dolly, with the track slots having a center-to-center distance of 16".

Matthews Case for Matthews Slider 29"

Matthews Case for Matthews Slider 29"(377742-5/100) The Wheeled Hard Case from Matthews is custom-designed to safely store a 29" Matthews Slider. It features wheels at one end for easy transport. Custom foam interior Built-in wheels   Side handles

Matthews Dolly DL-7 for Mt1 Tripod

Matthews Dolly DL-7 for Mt1 Tripod(811171) The Matthews DL-7 Dolly for the MT1 tripod is a favorite, heavy duty, tripod for location videography with heavy camera and lens set ups. Camera mobility can now be achieved with the DL-7 Dolly.   Designed and engineered to work with the MT-1 tripod

Matthews Dutti Dolly Mitchell Riser Kit

Matthews Dutti Dolly Mitchell Riser Kit(395500) The Mitchell Riser Kit for Dutti Dolly from Matthews allows you to raise your tripod head by 2.5". The clearance it provides enables you to use a geared head or bowl adapter on your Dutti Dolly, Matthews Slider, or Lazy Susan rig.

Matthews Centipede II Set (2) Kit

Matthews Centipede II Set (2)  Kit(395205) The Matthews Centipede II is a camera support dolly offering stable camera movement on curved tracks in television, video, and film production. It includes two 34" long main carriages, each featuring two split-carriage assemblies. Two separate four-wheeled carriages reside in each assembly and enable enhanced pivoting. By pairing the split-carriage design with increased wheel hardness, this camera support dolly delivers smooth tracking and improved contact reliability. Constructed of aluminum and steel, the Centipede II is both lightweight and heavy-duty. For simplified transport, it can be housed in the Centipede II case (available separately). 32-wheeled camera support dolly features eight carriages, each with four wheels Split-carriage design ensures smoother tracking and contact on curved track Splitting the large carriages into two smaller carriages allows each individual carriage to pivot quicker and more precisely to accommodate the changing radiuses of curved track layouts Centipede II wheels have been hardened to reduce flat spots   Includes two 34" long main carriages, each with two split-carriage assemblies

Matthews Centipede II Case

Matthews Centipede II Case(395198) The Matthews Centipede II Case has been designed to carry the Centipede II dolly (not included). It is a hard case made from ultra-high molecular weight polyethylene that is both lightweight and durable. The case features custom-cut ultra-high density military grade #2 foam to hold your dolly securely and help protect it from jars and drops that may occur during transport. The case incorporates spring-loaded rubber-covered handles for a comfortable grip, and built-in wheels so you can roll it as you would a piece of luggage. With a load capacity of 200 pounds, the case can easily handle the Centipede II dolly, which weighs less than 30 pounds.

Matthews Slider 45"

Matthews Slider 45"(377744) Matthews complements your creativity by enabling smooth camera movement with this 45" Slider. Both grip and operator friendly, this lightweight and sturdy camera platform features a modular design for offset camera rigging and maximized compatibility. It is fully field adjustable with Allen keys and a 7/16" open wrench.   It can work upside-down for low-angle shots, can support more than one carriage at a time for A and B camera shots, and has positive lock at 90° when in use on most dollies (Chapman, Fisher, Panther, etc.). Each carriage can support up to 175 pounds, and the system uses oversized proprietary roller wheels for fast and quiet movement. Fully factory assembled, the system will accept any gear head / fluid head / camera combination and come complete with the necessary mounting accessories and hardware. The slider is completely modular, allowing offset mounting of the rotating Mitchell base to extend the reach of the system. This feature may be used for tabletop, car interior, and many other situations. It not only gives you smooth camera movement, but it also adds stability in otherwise challenging locked-off positions. The slider gives you many options for solid and quiet camera movement and comes with numerous 3/8"-16 tapped holes for rigging and securing. It is conveniently sized to fit in some rifle-sized hard cases.

Matthews Slider 35"

Matthews Slider 35"(377743) Matthews Studio Equipment complements your creativity with Matthews-Slider: a camera platform that is extremely sturdy and lightweight owing to its innovative open frame construction. It is both camera operator and grip friendly, being virtually maintenance free (just keep it clean) and totally field adjustable with few basic tools: one 7/16" open wrench and a set of Allen wrenches. It can work upside-down for low-angle shots, can support more than one carriage at a time for A and B camera shots, and it has positive lock at 90 degrees when in use on most dollies (Chapman, Fisher, Panther, etc.). Each carriage can support up to 175lbs (80kg) - bracing of tracks might be necessary. The system uses proprietary wheels with ABEC5 stainless bearings with ceramic balls which make it very fast and extremely quiet.The Matthews-Slider comes in four basic sizes: 29", 35", 45" and 70" (74cm, 89cm,114cm and 178cm) and is also available in many custom lengths in 4.75" (12cm) increments between cross members up to 12' (366cm). Each foot/track adds approximately 3lbs (1.4kg). Fully factory assembled, the system will accept any gear head/fluid head/camera combination. It comes complete with Mitchell swivel base, Mitchell carriage, Mitchell 2" riser, filler plate, slim design locking handle, a set of leveling legs 0" to 6-3/4" (2x4", 2x6"), extra 3/8-16" screws and a set of spanner wrenches. The Matthews-Slider comes with numerous 3/8-16" tapped holes for rigging and securing. Additional accessories available from Matthews (bowl adapters, rigging spigots, etc.). Conveniently sized to fit in Pelican rifle/long cases series 1700.*** The family of Matthews-Sliders not only give you extremely smooth camera movement, they also add stability in otherwise challenging lock-off positions. For example, getting the camera off a ledge or window-sill and trusting that it won't hurt your talent down below. All four of the standard sizes are completely modular, allowing offset mounting of the rotating Mitchell base to extend the reach of the system. This feature may be used for table top, car interior and many other situations. The Matthews-Slider gives you many options for incredibly solid, and quiet camera movement for an affordable price.   Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.  

Matthews Slider 29"

Matthews Slider 29"(377742) Matthews complements your creativity by enabling smooth camera movement with this 29" Slider. Both grip and operator friendly, this lightweight and sturdy camera platform features a modular design for offset camera rigging and maximized compatibility. It is fully field adjustable with Allen keys and a 7/16" open wrench. It can work upside-down for low-angle shots, can support more than one carriage at a time for A and B camera shots, and has positive lock at 90° when in use on most dollies (Chapman, Fisher, Panther, etc.). Each carriage can support up to 175 pounds, and the system uses oversized proprietary roller wheels for fast and quiet movement. Fully factory assembled, the system will accept any gear head / fluid head / camera combination and come complete with the necessary mounting accessories and hardware. The slider is completely modular, allowing offset mounting of the rotating Mitchell base to extend the reach of the system. This feature may be used for tabletop, car interior, and many other situations. It not only gives you smooth camera movement, but it also adds stability in otherwise challenging locked-off positions. The slider gives you many options for solid and quiet camera movement and comes with numerous 3/8"-16 tapped holes for rigging and securing. It is conveniently sized to fit in some rifle-sized hard cases.

Matthews Dutti Dolly Grenade

Dutti Dolly Grenade - 395420K Designed to join 5/8” baby pins and 1-1/4” pipe  (1.75” OD). The caps allows speed rail couplers to rotate safely when quick repositioning is needed.

Matthews Stainless Steel Track 4'

Stainless Steel Track 4' - 397070 Matthews manufactures and supplies the industry with both Heavy Wall and stainless steel Dolly Track. Heavy wall is manufactured from 1-1/2" diameter steel tube and is chrome plated to protect it from negative environmental effects. It is slightly less expensive than stainless steel track. Stainless steel track does not require plating. Due to the inherent characteristics of the material, it is impervious to the elements. Additionally, all Matthews track now has black cross members. CAUTION: Matthews does not recommend that the two types of track be used together. The chrome plating used on the Heavy Wall can create size buildup and the finished diameter may be slightly larger. This can create a noticeable "bump" at the joint. Matthews curved tracks are available to complete 10' and 20' diameter circles. Be advised that most dollies will not navigate the 10' circle without the addition of a multi-wheeled device such as the Matthews Centipede #395200. Four pieces of 90-degree curve track are needed to complete a circle. Eight pieces are required for 20' diameter circle. All Matthews Dolly Track is rated to a maximum payload of 1200 Lbs (545kg) at the industry standard of 24.5" center to center track width.

Matthews Stainless Steel Track, 90 Degree Curve

Stainless Steel Track, 90 Degree Curve - 397080 Matthews manufactures and supplies the industry with both Heavy Wall and stainless steel Dolly Track. Heavy wall is manufactured from 1-1/2" diameter steel tube and is chrome plated to protect it from negative environmental effects. It is slightly less expensive than stainless steel track. Stainless steel track does not require plating. Due to the inherent characteristics of the material, it is impervious to the elements. Additionally, all Matthews track now has black cross members. CAUTION: Matthews does not recommend that the two types of track be used together. The chrome plating used on the Heavy Wall can create size buildup and the finished diameter may be slightly larger. This can create a noticeable "bump" at the joint. Matthews curved tracks are available to complete 10' and 20' diameter circles. Be advised that most dollies will not navigate the 10' circle without the addition of a multi-wheeled device such as the Matthews Centipede #395200. Four pieces of 90-degree curve track are needed to complete a circle. Eight pieces are required for 20' diameter circle. All Matthews Dolly Track is rated to a maximum payload of 1200 Lbs (545kg) at the industry standard of 24.5" center to center track width.

Matthews Stainless Steel 8' Curved Track 20' DIA

Stainless Steel 8' Curved Track 20' DIA - 397059 Matthews manufactures and supplies the industry with both Heavy Wall and stainless steel Dolly Track. Heavy wall is manufactured from 1-1/2" diameter steel tube and is chrome plated to protect it from negative environmental effects. It is slightly less expensive than stainless steel track. Stainless steel track does not require plating. Due to the inherent characteristics of the material, it is impervious to the elements. Additionally, all Matthews track now has black cross members. CAUTION: Matthews does not recommend that the two types of track be used together. The chrome plating used on the Heavy Wall can create size buildup and the finished diameter may be slightly larger. This can create a noticeable "bump" at the joint. Matthews curved tracks are available to complete 10' and 20' diameter circles. Be advised that most dollies will not navigate the 10' circle without the addition of a multi-wheeled device such as the Matthews Centipede #395200. Four pieces of 90-degree curve track are needed to complete a circle. Eight pieces are required for 20' diameter circle. All Matthews Dolly Track is rated to a maximum payload of 1200 Lbs (545kg) at the industry standard of 24.5" center to center track width.

Matthews Set Hot Buttons

Set Hot Buttons - 395012 Hot Buttons work beautifully with Matthews Doorway Dolly (click to view the Doorway Dolly) or the even more versatile Round-d-Round Doorway Dolly (Click to view the Round-d-Round). For straight or curve track, steel, aluminum, or PVC pipe, simply remove the locking nut, self-contained wheel and tire from each axle and replace with Hot Button set and nut. Hot Buttons also make a perfect scooter dolly with just two axles and any size ordinary plywood. Combination Track/Stage Wheels #395001 are as simple to change as the Hot Buttons. These wheels have self-contained bearings designed to work on hard surfaces or 1-1/2' diameter straight track only.

Matthews Western Dolly

Western Dolly - 395047 The Western Dolly is a larger, heavier duty platform than the Doorway, with a maximum capacity of 1200 Lbs. (544kg). The wider, longer platform provides an even smoother ride with its larger, wider tires and extended wheelbase. This dolly can be equipped with a turret as can the Doorway. The turret assembly allows for the mounting of two seats and a complete camera configuration support by a Mitchell Base. The Western Dolly's Pop-Off wheels allow quick removal and easy storage. The axle is integrated into the wheel assembly to prevent the axle from becoming separated from the wheel upon removal. The wheel base of both is 52" with an overall length of 76". The platform size is 48" wide by 66" long. Total weight capacity is 1200 Lbs. (544kg). Tire pressure - 16-22 Lbs. Whether used as an equipment transportation vehicle or as a camera platform, the Western Dolly provides reliable, heavy-duty, steady support at a reasonable price. While the configuration of the Western Dolly axle has often been copied by competitors, field observation has proven that none have been successful in matching the strength of the Matthews axle. Because it is impossible to anticipate the manner in which the dolly will be loaded or the slope of the terrain on which it will be used, Matthews has learned that the capacity of each axle must match the total capacity of the dolly. The strongest Dolly of its type in the business.

Matthews Track, Stainless Steel, 10' Strait

Track, Stainless Steel, 10' Strait - 397067 Matthews manufactures and supplies the industry with both Heavy Wall and stainless steel Dolly Track. Heavy wall is manufactured from 1-1/2" diameter steel tube and is chrome plated to protect it from negative environmental effects. It is slightly less expensive than stainless steel track. Stainless steel track does not require plating. Due to the inherent characteristics of the material, it is impervious to the elements. Additionally, all Matthews track now has black cross members.

Matthews Track, Stainless Steel, 8' Strait

Track, Stainless Steel, 8' Strait - 397065 Matthews manufactures and supplies the industry with both Heavy Wall and stainless steel Dolly Track. Heavy wall is manufactured from 1-1/2" diameter steel tube and is chrome plated to protect it from negative environmental effects. It is slightly less expensive than stainless steel track. Stainless steel track does not require plating. Due to the inherent characteristics of the material, it is impervious to the elements. Additionally, all Matthews track now has black cross members.

Matthews Track, Stainless Steel, 4' Strait

Track, Stainless Steel, 4' Strait - 397065 Matthews manufactures and supplies the industry with both Heavy Wall and stainless steel Dolly Track. Heavy wall is manufactured from 1-1/2" diameter steel tube and is chrome plated to protect it from negative environmental effects. It is slightly less expensive than stainless steel track. Stainless steel track does not require plating. Due to the inherent characteristics of the material, it is impervious to the elements. Additionally, all Matthews track now has black cross members.

Matthews Doorway Dolly

Matthews Doorway Dolly(395100) Matthews builds the strongest platform dollies in the business! For years the Doorway Dolly has proven its versatility on stage and location. Quick change pneumatic wheels are standard equipment. The Dolly can easily be fitted with Matthews Hot Buttons for use on straight or curved track. The platform is fitted with a recessed camera tie-down and is carpeted for a nonslip, low maintenance surface. The Doorway Dolly will move through a full range of travel with either the Push Bar or Pull Bar. Load it with gear to get to the location with ease! The platform can be flipped over for even lower camera positioning. Ground clearance is 9" or 3" when inverted. The removable side boards add an extra 10" per side for increased platform width. The wheelbase is 28-1/4" wide and the platform length is 51". Hot Buttons can be easily installed to accommodate standard 24.5" width track. Weight Capacity 800 Lbs. (363kg) The Doorway Dolly with Turret provides a 360 degree swing of both the camera mount and operator with all the functions of the standard dolly system. Mitchell mount and single operator seat are standard.

Matthews Infinity Arm

Infinity Arm - 429627 Infinity Arm is a versatile cine arm used to mount cameras, lights, monitors and anything else you require. The Infinity Arm is a fully articulated arm equipped with 360degrees rotate-able and interchangeable, ball-in-socket, quick release tips for adding and removing accessories quickly and efficiently. The Infinity Arm is the strongest articulating cine arm on the market, with a weight capacity of 15-32lbs depending on the configuration. The Infinity Arm is manufactured in two identical sections. Both sections are equipped with removable ball-in-socket assemblies at their outer end, and joined at their common center point by a radial rosette, designed to assemble and lock the two independent arms simultaneously into their desired positions for optimal functionality and accessory placement. PATENT PENDING.

Matthews Road Rag C-Vival Kit

Road Rag C-Vival Kit - 999026 Specifically designed for the run and gun shooter who must move quickly and create studio quality images, this new kit contains two (2) 40" Matthews C+, C-Stands, a RoadRags Kit which includes a single, double, silk and a flag and the convenient MiniGrip Kit for quick mounting of the light modification devices to the light stand. Packaged as a self contained kit, the heavy-duty case includes wheels for easy transport and maneuverability.

Matthews - Round-d-Round Dolly

Matthews - Round-d-Round Dolly - 395300 The new Round-d-Round Doorway Dolly from Matthews is the next generation in Doorway Dolly development. Based on the industry proven designed and engineered Matthews Doorway Dolly, the new Round-d-Round model offers all-wheel steering which allows for greater turning flexibility and will turn in a tight 6 foot (2 meter) circle. The camera operator seat will mount in six different fixed locations. Steering from both ends of the dolly will allow unlimited camera positioning as the dolly rolls on track with either Hot Buttons or the Matthews Centipede or on the ground with the standard pneumatic rubber tires. Load capacity is over 1100 pounds (500kg) and the platform is carpeted for a non-slip, low-maintenance surface.

Matthews Seat & Riser Assembly

Seat & Riser Assembly - 395310  Seat and Riser Assembly for the Round-D-Round Doorway Dolly or the Doorway Dolly, or any other dolly! Junior male pin on the end.

Matthews Dutti Dolly Speed Wheels

Dutti Dolly Speed Wheels - B395420K The Dutti Dolly Speed Wheels Set from Matthews provides additional support when using a Dutti Dolly for fast, aggressive moves.   A pair of Speed Wheels is set at an angle between the original wheels on each side of the Dutti Dolly. The four wheels in the set fasten to the bottom of the dolly using the included mounting frames and screws.

Matthews Dutti Dolly Rental Kit (Back)

Matthews Dutti Dolly Rental Kit (Black) B395400K The Dutti Dolly is a simple but elegant design that is expanding the versatility of the common dolly shot. Born on-set, it has evolved directly from the demands of cinematographers to either get low or move in tight spaces without sacrificing stability. James Saldutti, a Dolly Grip known as ‘Dutti’ in the Hollywood community, began developing this dolly nearly 15 years ago. Since that time, the Dutti Dolly has been used on hundreds of feature films, television shows and commercials. Through a partnership with Matthews, the Dutti Dolly is now commercially available. The design has been refined with a sturdy 1/2″ thick rectangular CNC’d aluminum platform and a built-in Mitchell mount. Measuring 20” x 24”, it rolls extremely low to the ground at just under 2” in height while remaining incredibly stable whether riding directly on smooth surfaces, or on rails. Its 8 inline skate wheels and universal stand brackets allow it ride smoothly on speed rail or on tubing found in a local hardware store such as round, square, angle or PVC. It’s perfect for smaller or traveling productions where fast set-ups are required and equipment is limited. Despite its small size, Dutti Dolly remains incredibly stable and adaptable. It can be mounted on the ground, on stands or apple boxes, over or underslung without the wobble seen on other small dollies. The compact footprint is easy to set-up and transport, yet large and durable enough for standing or sitting applications, and is compatible with mounting tripods, bazookas, tilt plates and other accessories. There is no other dolly in the world like it. The Dutti Dolly Rental Kit was assembled based on the feedback of numerous Key Grips and rental houses to provide everything needed for daily on-set requirements. Purchasing the kit saves hundreds over the cost of buying each component individually.

Matthews - Dutti Dolly Tripod Wings

Matthews - Dutti Dolly Tripod Wings - 395410 The Dutti Dolly Tripod Wing kit was designed to accommodate mid-level and floor spreader tripods with a 30” diameter or less. No tools required, but a ratchet strap or rope tie might be helpful in securing the tripod for faster, more aggressive moves.

Matthews - Dutti Dolly

Matthews - Dutti Dolly - 395400 The Dutti Dolly is a simple but elegant design that is expanding the versatility of the common dolly shot. Born on-set, it has evolved directly from the demands of cinematographers to either get low or move in tight spaces without sacrificing stability. James Saldutti, a Dolly Grip known as ‘Dutti’ in the Hollywood community, began developing this dolly nearly 15 years ago. Since that time, the Dutti Dolly has been used on hundreds of feature films, television shows and commercials. Through a partnership with Matthews, the Dutti Dolly is now commercially available. The design has been refined with a sturdy 1/2″ thick rectangular CNC’d aluminum platform and a built-in Mitchell mount. Measuring 20” x 24”, it rolls extremely low to the ground at just under 2” in height while remaining incredibly stable whether riding directly on smooth surfaces, or on rails. Its 8 inline skate wheels and universal stand brackets allow it ride smoothly on speed rail or on tubing found in a local hardware store such as round, square, angle or PVC. It’s perfect for smaller or traveling productions where fast set-ups are required and equipment is limited. Despite its small size, Dutti Dolly remains incredibly stable and adaptable. It can be mounted on the ground, on stands or apple boxes, over or underslung without the wobble seen on other small dollies. The compact footprint is easy to set-up and transport, yet large and durable enough for standing or sitting applications, and is compatible with mounting tripods, bazookas, tilt plates and other accessories. There is no other dolly in the world like it.

Matthews - 75mm Bowl Adapters

Matthews - 75mm Bowl Adapters - 395411

Matthews - Steady Rest

Matthews - Steady Rest - B386032 The Steady Rest (Moses pole) is a double riser, telescoping pole with a crutch tip on the bottom and a 5/8” baby pin on the top. It was designed to rest steady-cam systems and stabilizers in-between shots so you can give your back a break. It was also created to be used as end support for slider systems when rigged on a dolly to help prevent sag. Use the baby ball head adapter to rig it on the bottom of your slider.

Matthews - CAM Tank

Matthews - CAM Tank - 417013 Matthews CAM Tank is designed to accept all large format camera plates or direct mount to any large or medium format camera equipped with 3/8"-16 mounting holes. The CAM Tank was designed for extremely low shots, without taking away your ability to pan and tilt the camera. It is also used to achieve dutch angles when mounted to a fluid head, or shots designed to be pointed straight down off of a fluid head on a tripod or jib. The bottom of the plate has 17 strategically placed 3/8"-16 tapped holes spaced 1" apart, complying with Motion Picture Industry Standards. The system is CNC machined out of 6061 T6 aluminum, stainless steel hardware. The pan bearing uses a machined polyoqymethyline, delrin disk, which self-lubricates and has an endurance rating 100x more than any plastic. The tilt system uses 4 premium NSK deep grooved ball bearings, made in Japan. Both pan and tilt functions come with brakes for lock off shots and camera safety.

Matthews MT 1 Tripod Television Style Head

MT 1 Tripod Television Style Head - 812175 The time-proven, favorite, heavy-duty tripod for location videography with heavy camera and lens packages. Nearly every sports remote broadcast - including auto racing, baseball, football and wrestling - depends on the MT-1 for the firm, stable platform required for "whip" pans and other rapid camera movements with no tripod jitter, twist, or swaying. Camera mobility can be achieved with the DL-7 Dolly or the MT-1 can be mounted to the Doorway Dolly for either track or surface running. Leveling the MT-1 has been simplified by placing the leveling bubble in the center post. The MT-1 now offers a new and improved braking system, furthering its handling and stabilizing capabilities.

Matthews Motion Picture Style Head MT1 Tripod

Motion Picture Style Head MT1 Tripod - 812170 The time-proven, favorite, heavy-duty tripod for location videography with heavy camera and lens packages. Nearly every sports remote broadcast - including auto racing, baseball, football and wrestling - depends on the MT-1 for the firm, stable platform required for "whip" pans and other rapid camera movements with no tripod jitter, twist, or swaying. Camera mobility can be achieved with the DL-7 Dolly or the MT-1 can be mounted to the Doorway Dolly for either track or surface running. Leveling the MT-1 has been simplified by placing the leveling bubble in the center post. The MT-1 now offers a new and improved braking system, furthering its handling and stabilizing capabilities.

Matthews Elemac Mounting Plate

Elemac Mounting Plate - 515003 The Mathews 515003 is an Elemac mounting plate. This industry standard plate works with Elemac dolly systems, camera heads and bazooka camera stands. This plate offers the the three bolt Elemac connectivity for standard workability.

Matthews - Bazooka

Matthews - Bazooka - 377702 The Bazooka, PN 377702, while being used either 'freestanding' or in conjunction with any other camera dolly, reveals a myriad of creative imaging possibilities when using the Elemac mounting plate and a variety of side arms and adapters as shown here. The Matthews Bazooka offers a wide range of camera mount configurations all at very affordable prices. The Matthews Bazooka is based on the international industry standard Elemac mounting system. Lightweight and easily mounted to any Matthews Doorway Dolly with just three bolts, the Matthews Bazooka adjusts from 24" (61cm) to 39-1/4" (100cm). Matthews Doorway Dolly provides a particularly stable platform for camera packages up to 100lbs (45kg).

Matthews - Lazy Suzy

Matthews - Lazy Suzy - 415152 The Matthews Lazy Suzy (mitchell based) provides the cinematographer/ videographer with more creative opportunities through the use of an articulated double-swivel platform. This heavy-duty camera positioning device allows you to place the camera anywhere within a 25” diameter circle without having to reposition the dolly, tripod, or car mount rig. The camera can be secured firmly for traveling shots, process trailers, or lock-off shots with the series of strategically placed ¼” and 3/8” tapped holes. The Lazy Suzy will support camera packages up to 70lbs (30kg). Additional accessories and adapters are available, making the mounting possibilities limitless. Each unit is made with 6161 T-6 black hard anodized aluminum. All steel parts are type 304 stainless steel. Bushings are made from black Acetal. All bolts, nuts, and washers are grade 18-8 stainless steel. The adjustment keys are made from steel with black power coat finish. Lazy Suzy is weather proof from minus 40f to plus 180f or minus 40c to 80c. Lubricant is never necessary. Mild soap and water is all that is needed for cleaning. Disclaimer – Like all such devices, common sense and judgment must be used. The Lazy must be properly locked down when used on moving vehicles. Triangulating the system on moving vehicles is highly recommended to ensure safety of those around as well as for camera stability. Both top and bottom plates have strategically placed ¼” and 3/8” tapped holes for triangulation.

Matthews Lazy Suzy 75mm - 100mm Bowl Adapter

Lazy Suzy 75mm - 100mm Bowl Adapter - 12065-02 The low-profile Mitchell to 75-100mm Bowl Adapter from Matthews is designed for use with the Lazy Suzy camera swivel platform, adapting its Mitchell top plate to accept 75 to 100mm ball tripod heads. The mount can also be used with other devices that have standard Mitchell mounts.

Matthews 100mm Elemac to Bowl Adapter

Matthews 100mm Elemac to Bowl Adapter - 845120 The Matthews Elemac to 100mm Bowl Adapter clamps on to an Elemac fitting and adapts it to accept a fluid head with a 100mm ball base.

Matthews - Elemac Arm to Mitchell Adapter

Matthews 515024 Elemac Arm to Mitchell Adapter - 515024 The Matthews 515024 Elemack Arm to Mitchell Adapter facilitates the attachment of an Elemack jib arm on any support with a Mitchell flange.

Matthews MT 1 Tripod

Matthews MT 1 Tripod - 1062-3 The Matthews Low-Profile Mitchell Tie-Down is about a third of the size of standard Mitchell mount tie-downs, and features an ergonomic design that makes it easier to screw in. It's compatible with all Mitchell mount fluid heads.

Matthews 6" Vacuum Cup W/ 3/8"-16 Studs

6" Vacuum Cup W/ 3/8"-16 Studs 6049/100 6049100 6049 100 6049-100 The 6" Suction Cup With 3/8"-16 Stud from Matthews is a super-strong camera and lighting support designed to securely mount your equipment to any flat surface. The cup features a simple-to-use integrated pump system which creates an air-tight seal between the suction cup and the chosen surface. Simply press the pin inwards to create the vacuum seal and when the red-line disappears - you're ready to go! The top of the cup has been fitted with a common 3/6"-16 threaded stud to accommodate most standard tripod and monopod heads, giving the user a wide range of choices when it comes to camera movement and positioning. When using this suction cup on a horizontal surface Matthews recommends a load capacity of no greater than 20 lb, however, when used on a vertical surface weight capacity varies based on the size and weight of the equipment being used. All users are recommended to test the stability of the suction cup on a given surface before mounting heavy equipment.

Matthews 40" C+Stand W/Spring Loaded Turtle Base, Includes Grip Head & Arm - Chrome

Matthews 40" C+Stand W/Spring Loaded Turtle Base, Includes Grip Head & Arm - Chrome (MD756140 MD 756140 MD/756140)  One of the most popular models ever. Comes with a Turtle Base and Matthews Grip Head & Arm. Available in Black Universally seen as the best C-Stand, Griphead  and Arm in the business due to its superior gripping strength, this product is the first choice of professionals and can be found on film sets all over the world. Matthews Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast, efficient, safe tightening with little effort. Comes with Matthews Hollywood Grip Head attached to one end, the strongest Grip Head in the business, and an additional Grip Head for positioning. Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.

Matthews Mathews Digital Baby Stand

Mathews Digital Baby Stand(MD-387032) Matthews Digital presents this high-quality lighting stand for the demanding professional. Innovative, robust and durable, the Matthews Digital lighting stands are becoming an integral component of location and studio lighting packages. Additionally, each riser section is spring-dampened, ensuring the stand may be safely lowered. Designed to be stronger and lighter than other manufacturers' more expensive aluminum stands, this is a very robust chrome steel product at a great price. Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality   *Use the Beefy Baby Door Stand Rack to hold the baby stand.