Matthews Infinity Monitor Mount

Matthews Infinity Monitor Mount(429704) Designed specifically for the Matthews Infinity Arm, the Matthews Infinity Monitor Mount allows you to mount any piece of gear that has either a 75 or 100mm VESA mounting pattern onto an Infinity Arm. Made from two pieces of black anodized 6061-T6 aluminum, the mount features a 1" ball, weighs 1.5 lb, and it supports up to 32 lb (the limit of the arm).

Matthews SS Shot Bag, 25lb, Cordura, Black

Matthews SS Shot Bag, 25lb, Cordura, Black(299853) Matthews Shotbags come in a variety of shapes and weights. They are used for securing the bases of light stands and set walls. Many have handles, for hanging on hooks or risers. Some have two wings, to allow draping over light stand legs. Most are cordura nylon, some are vinyl covered and waterproof. Some models of sandbags are shipped empty, for convenience and economy. They can be filled with sand, or any type of weight you provide, and emptied for storage, or transport. Filled with steel buckshot that will not rust, if the weight bag is soaked. Black cordura nylon, with handle.   Weighs 25 lbs (11.4 kg)

Matthews Sound Blanket W/Grommets, Blue

Matthews Sound Blanket W/Grommets, Blue(329040-1) This Matthews Sound Blanket can be used to black out a window or hang in a room for added sound insulation. Sound blankets can also be used to protect equipment during transportation. This model has 12 grommets, four on each side.

Matthews The Babysitt'r - Set Of 2

Matthews The Babysitt'r  - Set Of 2(259567)   Ideal for low-angle shooting, the pack from Matthews contains two 11.75 x 9.75 x 1" BabySitt'r Mini wooden bases that each accept two standard baby plates with 5/8" pins, regardless of the length of the pin. The optional plates mount securely to the BabySitt'r via a spring-loaded locking system. When paired with a set of baby plates, a BabySitt'r essentially becomes an instant dual pigeon plate in just seconds. The spring-loaded locking system allows plates to seamlessly and securely slot into place. This is a huge time-saving upgrade from the traditional method of using a drill and hardware to mount baby plates to apple boxes. Additionally, there is no need to replace wooden equipment over time because of wear and tear from repositioning baby plates.While the specialized design does indeed meet its true potential when paired with two baby plates, the BabySitt'r doubles as a normal pancake when you're short a 1/8 apple box or just don't need to utilize the BabySittr's distinct capabilities.  

Matthews Quarter Apple Box

Matthews Quarter Apple Box(259537) Matthews Apple Boxes are some of the handiest tools to have on the set or in the studio. Use them for propping, leveling, standing or sitting; nail wall plates to them to hold low angle lighting fixtures. Precisely made, they are supported in the center, and are dimensionally correct. Smooth natural finish   Rounded-edge cut-outs for easy handling

Matthews Full Apple Box

Matthews Full Apple Box(259535) Apple Boxes - Use them for propping or levelling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes. A Full Apple Box is equivalent to two 1/2 Apples, four 1/4 Apples and eight 1/8 Apples (pancake). Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, durability and build quality.  

Matthews Ss Wire Diffusion, 29" Full-Single

Matthews Ss Wire Diffusion, 29" Full-Single(435252E) Matthews Stainless Wire Diffusion (SST) is impervious to rust and holds up well under uneven, intense heat, thus making it preferable for use with open face or Fresnel lighting fixtures. Stainless Scrims do not diffuse the light; their function is to reduce light output at the source. Scrims do not affect the color temperature and produce no electronic interference. They may be stacked to achieve limitless variation of light intensity. Available from 5" to 29" to meet the requirements of almost any professional light in the industry. Scrims are available in single, double, half single, and half double configurations. Halves are employed to reduce a portion of the beam and are commonly used when the light is striking the plane of the subject or background at an angle.

Matthews Ss Wire Diffusion, 12" Five Piece Kit

Matthews Ss Wire Diffusion, 12" Five Piece Kit(455410E) This Stainless Steel Wire Diffusion Set from Matthews is made up of five 13" circular scrims, designed to reduce light output at the source when used with open face, non-Fresnel lighting instruments. The full scrims reduce light evenly across the beam output, the half scrims reduce a portion of the beam and are used when the light is striking the plane of the subject or background at an angle. The kit includes one full-single, two full-double, one half-single, and one half-double scrims. Scrims may be stacked to achieve limitless variation of light intensity for nuanced control, without affecting color temperature. These stainless steel scrims are impervious to rust and provide durable use under uneven, intense heat from quartz and HMI lights. The circular steel rims are color-coded for rapid ease of use and repeatable set-ups. Color Coded Green: Single Green / Silver: Half-Single Red: Double   Red / Silver: Half-Double

Matthews Quick Reverse Ear For 1" Square Tubing With Baby Pin

Matthews Quick Reverse Ear For 1" Square Tubing With Baby Pin(409209) The Baby Pin from Matthews is a quick-reverse hardware accessory that connects to 1" square tubing. This 1" baby pin supports frame sizes up to 6x6 ft.

Matthews Quick Reverse Ear For 1.25" Round Pipe

Matthews Quick Reverse Ear For 1.25" Round Pipe(319651) Matthews offers a wide variety of Corners, Connectors, Ears, and Pins to create your own Overhead Frame on the go. As part of the design, each Hollywood Corner is gusseted for maximum strength. There is no need for cumbersome tie straps. The corners contain all tubes in a captive state, no more loose pieces that could be lost or damaged.   This Ear will fit a 1.25" diameter pipe.

Matthews Quick Reverse Ear For 1" Square Tubing

Matthews Quick Reverse Ear For 1" Square Tubing(409100-3) The Matthews Quick Reverse Ear for 1" Square Tube is part of a wide variety of Corners, Connectors, Ears and Pins to use as replacement parts for Butterfly/Overhead frames or use them to make your own custom size frame.

Matthews Hollywood Corner Kit (Set of 4)

Matthews Hollywood Corner Kit (Set of 4)(409003) This is a set of 4 Hollywood Corners. Each Hollywood Corner is gusseted for maximum strength. There is no need for cumbersome tie straps. The corners contain all tubes in a captive state -- no more loose pieces that can be lost or damaged. Secures 1" thick square frame tubing.

Matthews Overhead Frame Kit - Snap-A-Part Heavy Duty - 12' X 12'

Matthews Overhead Frame Kit - Snap-A-Part Heavy Duty - 12' X 12'(409712) All-Snap-A-Part Frames 8'x8' and larger, feature the "Quick Reverse Ear" which will enable the removal and reversal for uick 180° frame repositioning. Matthews offers a wide variety of materials to create your own custom Butterfly or Overhead.  

Matthews Overhead Frame Kit - Snap-A-Part Heavy Duty - 8' X 8'

Matthews Overhead Frame Kit - Snap-A-Part Heavy Duty - 8' X 8'(409708) This Matthews Butterfly/Overhead Snap-A-Part Heavy Duty Frame - 8x8' features the Quick Reverse Ear which will enable the removal and reversal for quick 180° frame repositioning. Accepts a wide assortment of optional 8 x 8' fabrics.

Matthews Overhead Frame Kit - Snap-A-Part, Light Duty - 6' X 6'

Matthews Overhead Frame Kit - Snap-A-Part, Light Duty - 6' X 6'(B309071) This is a Matthews Butterfly/Overhead Snap-A-Part Light Duty Frame - 6x6' with 3/4" Square tubing.

Matthews Griffylon Fab Tape, 1.5" X 100 Feet - Black

Matthews Griffylon Fab Tape, 1.5" X 100 Feet - Black(719704) Fab Tape is 2 sided and actually causes a molecular change when fusing the Griffylon materials together. This change makes the two pieces nearly impossible to separate.

Matthews Floppy, 40"X40'', Top Hinge

Matthews Floppy, 40"X40'', Top Hinge(169025T) Add this 40 x 40" Solid Floppy to your grip kit for easily rigged light control and cutting, with the option to open the flag into a large 40 x 80" black surface. Because Matthews has shaved 8" off of both the height and width of their traditional 4 x 4' floppy, this flag's compact size allows it to be transported in certain passenger vehicles without the need for a dedicated grip truck or cargo van. Simply undo the hook-and-loop touch fasteners at the corners, and the top hinge Floppy "flops" opens to become a large 40 x 80" opaque flag that creates a tent-like structure. Its two sections are comprised of heavyweight commando cloth duvetyne for optimized blockage of incoming light transmissions. It is also an easy way to create negative fill on one side of the subject when your desired look requires a bit more contrast. Though its obvious application is shaping light to achieve a wide variety of looks from the same sources, it can also double as a sunshade while shooting on location or as a privacy screen in the studio. The frame is hollow steel tubing to cut down on weight, while the solid steel mounting rod can stand up to years of heavy use.

Matthews Floppy, 40"X40'', Bottom Hinge

Matthews Floppy, 40"X40'', Bottom Hinge(169025B) The 4 x 4' line of Matthews silks, scrims, and flags have always been a popular item but just a tad large for travel—hence the birth of the 40 x 40" Bottom Hinge Floppy. The larger 48 x 48" size requires a van or grip truck for traveling, whereas shaving 8" on all sides makes it more manageable in tight spaces and allows it to fit in nearly all "wagons" or SUVs. Simply undo the touch fasteners at the corners, and the Bottom Hinge Floppy "flops" open to become a large 40 x 80" black flag capable of blocking light from large areas you don't want to illuminate. Structurally, the Bottom Hinge Floppy is impressive. The frame is hollow steel tubing to cut down on weight, while the solid steel mounting rod can stand up to years of heavy use.

Matthews Matthbounce Floppy, 40"X40", Top Hinge

Matthews Matthbounce Floppy, 40"X40", Top Hinge(159136) Add this 40 x 40" Matthbounce Floppy to your grip kit for easily rigged light control, with the option to open the flag into a large 40 x 80" reflective surface. Because Matthews has shaved 8" off both the height and width of their traditional 4 x 4' floppy, this bounce's compact size allows it to be transported in certain passenger vehicles without the need for a dedicated grip truck or cargo van. Simply undo the hook-and-loop touch fasteners at the corners, and the top hinge Floppy "flops" opens to become a large 40 x 80" reflective surface that creates a tent-like structure for creating versatile washes of bounced light. Its two sections are comprised of heavyweight commando cloth duvetyne for optimized blockage of incoming light transmissions and an inner surface of Matthew's ultra-reflective Matthbounce fabric. Though its obvious application is shaping light to achieve a wide variety of looks from the same sources, it can also double in a pinch as a heat-resistant sunshade while shooting on location or as a privacy screen in the studio. The frame is hollow steel tubing to cut down on weight, while the solid steel mounting rod can stand up to years of heavy use.

Matthews Road Rags Flag Fabric 24" X 36"

Matthews Road Rags Flag Fabric 24" X 36"(149008) The Matthews RoadRags II Flag blocks the output of any light source. The optional frame has an elastic corded frames easily fold for storing and transporting. By using the different materials available for the RoadRags system, the photographer/cinematographer/videographer is able to quickly create contrasts, different light ratios, diffusion or block the light. Fabric flag only. Frame is sold separately. Fits into most portable lighting kits.   Color coded fabric hem makes identification easier.

Matthews Road Rags Frame 24" X 36"

Matthews Road Rags Frame 24" X 36"(169191) This 24 x 36" Matthews RoadRags II Scrim Frame has an elastic corded frames easily fold for storing and transporting. A simple flick of the wrist is all that's required to quickly open the frame making it ready for use. By using the different materials (available separately), the photographer/cinematographer/videographer is able to quickly create contrasts, different light ratios, diffusion or block the light. RoadRags are designed for use under a controlled environment. Wind and/or other weather conditions may cause damage to this product.

Matthews Road Flags Break A Part Frame 48" X 48"

Matthews Road Flags Break A Part Frame 48" X 48" (169614) The RoadFlags II Frame is part of a system of light controls made by Matthews for the mobile photographer or videographer who needs to travel fast and light. The 48 x 48" metal frame sets up and breaks down into 4 pieces in seconds and fits in an optional 15 x 49" carry case.

Matthews Cutter Frame Only, 48" X 48''

Matthews Cutter Frame Only,  48" X 48''(539189) Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Flag, 12" X 18''

Matthews Flag, 12" X 18''(169042) Flags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° Flag frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Flag, 18" X 24''

Matthews Flag, 18" X 24''(169059) Flags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° Flag frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Flag, 24" X 30''

Matthews Flag, 24" X 30''(169010) Flags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° Flag frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Flag, 24" X 36''

Matthews Flag, 24" X 36''(169062) The 24 x 36" Black Flag from Matthews has a rectangular frame with a 3/8" top pin for mounting on a grip head. It should be noted that while the fabric covers the frame almost completely, the pin and its brace are of a bare metal, silver color. Used to control natural or artificial light, the black flag can also be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° flag frames will make it possible to position the instrument over the top of the set wall or use two or more units to create a box for better light control.

Matthews Flag, 30"X 36''

Matthews Flag, 30"X 36''(169001) Flags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° Flag frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Cutter, 10" X 42''

Matthews Cutter, 10" X 42''(169003) Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Cutter, 18" X 48''

Matthews Cutter, 18" X 48''(169004) The 18 x 24" Cutter from Matthews is a rectangular frame with mounting pins attached. Used to control natural or artificial light, it can protect the camera lens from flare, control spill light from other sources, or keep light from reaching areas on the set. The recently designed frame will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Cutter ,24" X 72''

Matthews Cutter ,24" X 72''(169067) Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Floppy, 24" X 72'', Side Hinge

Matthews Floppy, 24" X 72'', Side Hinge(169029) Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Touch Fastener until needed at which time the Cutter becomes twice its original size Newly designed 90° Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. Opens on the 72" side only.

Matthews Floppy, 48" X 48'', Botom Hinge

Matthews Floppy, 48" X 48'', Botom Hinge(169028B) Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Touch Fastener until needed at which time the Cutter becomes twice its original size Newly designed 90° Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Matthbounce Floppy, 48" X 48", Top Hinge

Matthews Matthbounce Floppy, 48" X 48", Top Hinge(159135) The 48 x 48" Matthews Matthbounce Floppy is a popular size that can be transported in a van or grip truck. It features a black exterior, but once you undo the touch fasteners at the corners, the Matthbounce flops open to a large white reflector that allows a nice return and soft quality of light. The frame is made of hollow steel tubing to cut down on weight, while the solid steel mounting rod can stand up to years of heavy use.

Matthews Open End Single Scrim, 12" X 18'', Black

Matthews Open End Single Scrim, 12" X 18'', Black(149052) This 12 x 18" Open End Single Scrim from Matthews is an essential component to a complete grip kit, giving one the total creative flexibility of precise light manipulation. This stainless steel frame features one layer of Black Bobinett lighting control fabric to reduce the intensity of light in a given area. This specific frame is equipped with a single layer of Black Bobinett fabric, which reduces the effective illumination of the selected area by 1/2 stop. This is indicated by the green fabric which lines the frame. Light reduction strength can be finely tuned by rotating the scrim, thus increasing the amount of netting light needs to pass through before hitting the subject. All Matthews Open End Scrims are constructed from rigid stainless steel and sport a 3/8" pin for rigging to standard grip heads, with an integrated support that can be used to hang the scrim from a C-stand handle when not in use. A nearly invisible length of piano wire is strung across the open side of the frame in order to effectively modify light by keeping the fabric taught without casting any additional shadows.

Matthews Open End Single Scrim, 18" X 24'', Black

Matthews Open End Single Scrim, 18" X 24'', Black(149066) This 18 x 24" Open End Single Scrim from Matthews is an essential component to a complete grip kit, giving one the total creative flexibility of precise light manipulation. This stainless steel frame features one layer of Black Bobinett lighting control fabric to reduce the intensity of light in a given area. This specific frame is equipped with a single layer of Black Bobinett fabric, which reduces the effective illumination of the selected area by 1/2 stop. This is indicated by the green fabric which lines the frame. Light reduction strength can be finely tuned by rotating the scrim, thus increasing the amount of netting light needs to pass through before hitting the subject. All Matthews Open End Scrims are constructed from rigid stainless steel and sport a 3/8" pin for rigging to standard grip heads, with an integrated support that can be used to hang the scrim from a C-stand handle when not in use. A nearly invisible length of piano wire is strung across the open side of the frame in order to effectively modify light by keeping the fabric taught without casting any additional shadows.

Matthews Open End Single Scrim, 24" X 36'', Black

Matthews Open End Single Scrim, 24" X 36'', Black(149063) This 24 x 36" Open End Single Scrim from Matthews is an essential component to a complete grip kit, giving one the total creative flexibility of precise light manipulation. This stainless steel frame features one layer of Black Bobinett lighting control fabric to reduce the intensity of light in a given area. This specific frame is equipped with a single layer of Black Bobinett fabric, which reduces the effective illumination of the selected area by 1/2 stop. This is indicated by the green fabric which lines the frame. Light reduction strength can be finely tuned by rotating the scrim, thus increasing the amount of netting light needs to pass through before hitting the subject. All Matthews Open End Scrims are constructed from rigid stainless steel and sport a 3/8" pin for rigging to standard grip heads, with an integrated support that can be used to hang the scrim from a C-stand handle when not in use. A nearly invisible length of piano wire is strung across the open side of the frame in order to effectively modify light by keeping the fabric taught without casting any additional shadows.

Matthews Open End Double Scrim, 12" X 18'', Black

Matthews Open End Double Scrim, 12" X 18'', Black(149058) This 12 x 18" Open End Double Scrim from Matthews is an essential component to a complete grip kit, giving one the total creative flexibility of precise light manipulation. This stainless steel frame features two layers of Black Bobinett lighting control fabric to reduce the intensity of light in a given area. This specific frame is equipped with a double layer of Black Bobinett fabric, which reduces the effective illumination of the selected area by a full stop. This is indicated by the red fabric which lines the frame. Light reduction strength can be finely tuned by rotating the scrim, thus increasing the amount of netting light needs to pass through before hitting the subject. All Matthews Open End Scrims are constructed from rigid stainless steel and sport a 3/8" pin for rigging to standard grip heads, with an integrated support that can be used to hang the scrim from a C-stand handle when not in use. A nearly invisible length of piano wire is strung across the open side of the frame in order to effectively modify light by keeping the fabric taught without casting any additional shadows.

Matthews Open End Double Scrim, 18" X 24'', Black

Matthews Open End Double Scrim, 18" X 24'', Black(149061) This 18 x 24" Open End Double Scrim from Matthews is an essential component to a complete grip kit, giving one the total creative flexibility of precise light manipulation. This stainless steel frame features two layers of Black Bobinett lighting control fabric to reduce the intensity of light in a given area. This specific frame is equipped with a double layer of Black Bobinett fabric, which reduces the effective illumination of the selected area by a full stop. This is indicated by the red fabric which lines the frame. Light reduction strength can be finely tuned by rotating the scrim, thus increasing the amount of netting light needs to pass through before hitting the subject. All Matthews Open End Scrims are constructed from rigid stainless steel and sport a 3/8" pin for rigging to standard grip heads, with an integrated support that can be used to hang the scrim from a C-stand handle when not in use. A nearly invisible length of piano wire is strung across the open side of the frame in order to effectively modify light by keeping the fabric taught without casting any additional shadows.

Matthews Open End Double Scrim, 24" X 36'', Black

Matthews Open End Double Scrim, 24" X 36'', Black(149064) This 24 x 36" Open End Double Scrim from Matthews is an essential component to a complete grip kit, giving one the total creative flexibility of precise light manipulation. This stainless steel frame features two layers of Black Bobinett lighting control fabric to reduce the intensity of light in a given area. This specific frame is equipped with a double layer of Black Bobinett fabric, which reduces the effective illumination of the selected area by a full stop. This is indicated by the red fabric which lines the frame. Light reduction strength can be finely tuned by rotating the scrim, thus increasing the amount of netting light needs to pass through before hitting the subject. All Matthews Open End Scrims are constructed from rigid stainless steel and sport a 3/8" pin for rigging to standard grip heads, with an integrated support that can be used to hang the scrim from a C-stand handle when not in use. A nearly invisible length of piano wire is strung across the open side of the frame in order to effectively modify light by keeping the fabric taught without casting any additional shadows

Matthews Open End Artificial Silk Scrim, 18" X 24'', White

Matthews Open End Artificial Silk Scrim, 18" X 24'', White(149545) Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. Open Ends are used to control or manipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color coded binding is used around the frame to identify the fabric. Open End Frames are black powder coated to minimize unwanted reflections.

Matthews Open End Artificial Silk Scrim, 24" X 36'', White

Matthews Open End Artificial Silk Scrim, 24" X 36'', White(149566) The 24 x 36" Open-End Scrim with White Artificial Silk from Matthews is made of spring steel with a 3/8" pin and support which can be used to hang the scrim from the C-stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow.   Open ends are used to control or manipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color-coded binding is used around the frame to identify the fabric. Open-end frames are black powder-coated to minimize unwanted reflections.

Matthews Open-End 1/4 Stop Silk Scrim, 24" X 36'', White

Matthews Open-End 1/4 Stop Silk Scrim, 24" X 36'', White(149550) The 24 x 36" Open-End Scrim from Matthews is made of spring steel with a 3/8" pin and support that can be used to hang the scrim from the C-stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow.   Open-end scrims are used to control or manipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color-coded binding is used around the frame to identify the fabric. The frame is black powder coated to minimize unwanted reflections.

Matthews Artificial Silk Scrim, 48" X 48'', White

Matthews Artificial Silk  Scrim, 48" X 48'', White(159015) The 48 x 48" Solid Frame Scrim White Artificial Silk from Matthews is made with two "ears" at the bottom that protect fabric when frames are slid in and out of their storage boxes and can be used as a point to tie off when used in certain conditions. To keep weight to a minimum and yet get maximum strength, all MSE Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod, and the frame is black powder-coated to minimize reflections.

Matthews Stop Silk Scrim, 48" X 48'', White

Matthews Stop Silk Scrim, 48" X 48'', White(159021) The 48 x 48" Solid Frame Scrim White Silk from Matthews offers 1/4 stop of light reduction. It is made with two "ears" at the bottom that protect the fabric when frames are slid in and out of their storage boxes and can be used as a point to tie off when used in certain conditions. To keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is a solid rod, and the frame is black powder-coated to minimize reflections.

Matthews China Silk Scrim, 48" X 48'', White

Matthews China Silk Scrim, 48" X 48'', White(159031) To keep weight to a minimum and yet get maximum strength, all MSE Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. The 48" x 48" frames are made with two "ears" at the bottom to protect fabric when frames are slid in and out of their storage boxes or can be used as a point to tie off when used in certain conditions.   Solid Frames are black powder coated to minimize reflections.

Matthews Gel Frame, Knife Blade, 18" X 24''

Matthews Gel Frame, Knife Blade, 18" X 24''(549122) The 18 x 24" Knife Blade Gel Frame from Matthews is designed with a flat profile so that gel filters can be easily mounted to it with double-stick tape.

Matthews Gel Frame, Knife Blade, 24" X 36"

Matthews Gel Frame, Knife Blade, 24" X 36"(549121) The 24 x 36" Knife Blade Gel Frame from Matthews is designed with a flat profile so that gel filters can be easily mounted to it with double-stick tape.

Matthews Gel Frame, Knife Blade, 30" X 36''

Matthews Gel Frame, Knife Blade, 30" X 36''(549123) The 30 x 36" Knife Blade Gel Frame from Matthews is designed with a flat profile so that gel filters can be easily mounted to it with double-stick tape.

Matthews Frame Only, Flag, 40" X 40''

Matthews Frame Only, Flag, 40" X 40''(539190) Newly designed 90° Cutter frames with mounting pins attached, will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.   With this new design, there are now three square corners as opposed to the older design providing just two.

Matthews Cucoloris, 18" X 24" Cello

Matthews Cucoloris, 18" X 24" Cello(199101) The Cucoloris is used to create shadow patterns on backgrounds or subjects. A flatly lit wall can be broken up into interesting pools of light and shadow. Lighting directors frequently use them to simulate sunlight filtering through trees.   The 18x24" Cello Cucoloris from Matthews projects a more subtle pattern. The pattern itself depends on the distance of the light source and the distance to the background. This "cookie" has webbing on three sides to prevent injury and present a more finished look. *** Please see that this item is a special order item.

Matthews Aluminum Reflector 24" X 24", Silver

Matthews Aluminum Reflector 24" X 24", Silver(B119069) One of the oldest and still most popular means of lighting a set is by taking a reflective surface and redirecting sunlight or artificial light exactly where it is needed. The "hard" side of the reflector will reflect the light almost exactly as it hits the board, while the "soft" side will soften the light as it redirects it. This 24" x 24" (61x61cm) reflector also has a yoke attached which terminates in a 5/8" receiver for mounting on a Baby Stand. The "soft" side has a stippled silver material, while the "hard" side has the shiny silver paper glued to it.

Matthews Standard 42" X 42" Reflector With Yoke Brake - Silver

Matthews Standard 42" X 42" Reflector With Yoke Brake - Silver(119732) One of the oldest and still most popular means of lighting a set is by taking a reflective surface and redirecting sunlight or artificial light exactly where it is needed. The "hard" side of the reflector will reflect the light almost exactly as it hits the board, while the "soft" side will soften the light as it redirects it. The Standard reflector measures 42" x 42" (107x107cm). Made of honeycomb material sandwiched between two sheets of aircraft aluminum which is then set into an aluminum frame. The frame is then mounted into a yoke which has a 1-1/8" pin to fit a Combo Stand and a braked pivot.   The Standard reflector is made with a shiny silver paper glued on the "hard" side and silver leaf squares on the "soft side".

Matthews Xeno Mirror Reflector, 42" X 42"

Matthews Xeno Mirror Reflector, 42" X 42"(119751) The Xeno mirrored reflector is 42" x 42" (107x107cm) and the surface is a Xeno mirror mounted with special brackets for easy changing. It is most commonly used for reflecting higher temperature light sources. The yoke has a brake in the pivot and is stand mounted via a 1-1/8" pin.   Xeno mirrors are made for xenon light sources only and will not redirect sun light smoothly.

Matthews Mirrored Reflectors - Frame and Foam only, 42x42"

Matthews Mirrored Reflectors - Frame and Foam only, 42x42"(119753) This Matthews 42" x 42" (107x107cm) frame only is for holding the mirrored reflectors, which are available separately.

Matthews Gold Size Paste, Quart

Matthews Gold Size Paste, Quart(139344) Matthews Gold Size Paste secures of patches of gold reflective material to other reflectors.

Matthews Matthboard Standard Reflector, Silver

Matthews Matthboard Standard Reflector, Silver(119726) One of the oldest and still most popular means of lighting a set is by taking a reflective surface and redirecting sunlight or artificial light exactly where it is needed. The "hard" side of the reflector will reflect the light almost exactly as it hits the board, while the "soft" side will soften the light as it redirects it. This honeycomb reflector is lightweight and measures 40" x 40" (102x102cm).   The "soft" side has a stippled silver material, while the "hard" side has the shiny silver paper glued to it

Matthews Dutti Dolly Kit Case

Matthews Dutti Dolly Kit Case(395400C) The Dutti Dolly Hard Case from Matthews features foam inserts custom-cut to fit a Dutti Dolly system. Use this wheeled case to easily transport the dolly, bowl adapters, rack brackets, Baby pins, and Mitchell riser kit. This is the wheeled case only and does not include the dolly or accessories. Case features include two latches, and both side and top folding handles.

Matthews Case for Matthews Slider 45"

Matthews Case for Matthews Slider 45"(377744-5/100) The Wheeled Hard Case from Matthews is custom-designed to safely store a 45" Matthews Slider. It features wheels at one end for easy transport. Custom foam interior Built-in wheels   Side handles

Matthews Lightweight Telescoping Hanger - 5' - 10' With Pipe Clamp & Stirrup

Matthews Lightweight Telescoping Hanger - 5' - 10' With Pipe Clamp & Stirrup(B429754) The 5 to 10' Lightweight Telescoping Hanger from Matthews is designed for use with lightweight fluorescent lights or other fixtures weighing up to 25 lb. It comes with a bolt mount and is engineered to telescope from a grid with nominal ceiling clearance. It's made of aluminum with internally welded safety collars and die-cast aluminum fittings.

Matthews Lightweight Telescoping Hanger - 4' - 8' With Pipe Clamp & Stirrup

Matthews Lightweight Telescoping Hanger - 4' - 8' With Pipe Clamp & Stirrup(B429748) The 4 to 8' Lightweight Telescoping Hanger with Pipe Clamp & Stirrup Hanger from Matthews is designed for use with lightweight fluorescent lights or other fixtures weighing up to 25 lb. It comes with a bolt mount and is engineered to telescope from the grid with nominal ceiling clearance. It's made of aluminum with internally welded safety collars and die-cast aluminum fittings.

Matthews Lightweight Telescoping Hanger - 1.5' - 3' With Pipe Clamp & Stirrup

Matthews Lightweight Telescoping Hanger - 1.5' - 3' With Pipe Clamp & Stirrup(B429746) The Matthews Lightweight Telescoping Hanger is designed for use with lightweight fluorescent or other fixtures weighing no more than 25 lb. It is engineered to telescope from 3 to 6' on a lighting grid with nominal ceiling clearance. It is constructed of aluminum with internally welded safety collars and cast aluminum fittings. The standard bolt end screws into the yoke of the mounted fixture. A stirrup, pipe clamp, and safety cable are included.

Matthews Lightweight Telescoping Hanger - 3' - 6' With Pipe Clamp & Stirrup

Matthews Lightweight Telescoping Hanger - 3' - 6' With Pipe Clamp & Stirrup(B429744) The Matthews Lightweight Telescoping Hanger is designed for use with lightweight fluorescent or other fixtures weighing no more than 25 lb. It is engineered to telescope from 3 to 6' on a lighting grid with nominal ceiling clearance. It is constructed of aluminum with internally welded safety collars and cast aluminum fittings. The standard bolt end screws into the yoke of the mounted fixture. A stirrup, pipe clamp, and safety cable are included

Matthews Lightweight Telescoping Hanger - 2' - 4' With Pipe Clamp & Stirrup

Matthews Lightweight Telescoping Hanger - 2' - 4' With Pipe Clamp & Stirrup(B429742) Designed for use with lightweight fluorescent or other fixtures weighing no more than 25 lbs. Engineered to telescope from 2 to 4 ft on a lighting grid with nominal ceiling clearence. Constructed of aluminum with internally welded safety collars and cast aluminum fittings. Standard bolt end screws into the yoke of the mounted fixture. Or order an adapter pin. Includes a pipe clamp, mounting stirrup and safety cable.

Matthews Lightweight Telescoping Hanger - 1' - 2' With Pipe Clamp & Stirrup

Matthews Lightweight Telescoping Hanger - 1' - 2' With Pipe Clamp & Stirrup(B429740) The 1 to 2' Lightweight Telescoping Hanger with Pipe Clamp & Stirrup Hanger from Matthews is designed for use with lightweight fluorescent lights or other fixtures weighing up to 25 lb. It comes with a bolt mount and is engineered to telescope from the grid with nominal ceiling clearance. It's made of aluminum with internally welded safety collars and die-cast aluminum fittings.

Matthews Lightweight Telescoping Hanger - 5' - 10' With Pipe Clamp

Matthews Lightweight Telescoping Hanger - 5' - 10' With Pipe Clamp(B429734) Designed for use with lightweight fluorescent or other fixtures weighing no more than 25 lbs. Engineered to telescope from 5 to 10 ft on a lighting grid with nominal ceiling clearence. Constructed of aluminum with internally welded safety collars and cast aluminum fittings. Standard bolt end screws into the yoke of the mounted fixture. Or order an adapter pin, or stirrup. Includes a pipe clamp and safety cable.

Matthews Lightweight Telescoping Hanger - 4' - 8' With Pipe Clamp

Matthews Lightweight Telescoping Hanger - 4' - 8' With Pipe Clamp(B429728) Designed for use with lightweight fluorescent or other fixtures weighing no more than 25 lbs. Engineered to telescope from 4 to 8 ft on a lighting grid with nominal ceiling clearence. Constructed of aluminum with internally welded safety collars and cast aluminum fittings. Standard bolt end screws into the yoke of the mounted fixture. Or order an adapter pin, or stirrup. Includes a pipe clamp and safety cable.

Matthews Lightweight Telescoping Hanger - 1.5' - 3' With Pipe Clamp

Matthews Lightweight Telescoping Hanger - 1.5' - 3' With Pipe Clamp(B429726) Designed for use with light weight fluorescents or other fixtures weighing no more than 25lbs. (11.4kg) Engineered to telescope from the grid with nominal ceiling clearance. Telescoping Hangers are available in a wide range of lengths and attachment options for both temporary and permanent placement of lighting fixtures. Hanger will accept all pipe clamps currently being manufactured. Constructed of aluminum with internally welded safety collars and cast aluminum fittings.   Size and weight is less than 50% of conventional hangers.

Matthews Lightweight Telescoping Hanger - 3' - 6' With Pipe Clamp

Matthews Lightweight Telescoping Hanger - 3' - 6' With Pipe Clamp(B429724) The Matthews Lightweight Telescoping Hanger with Clamp is designed for use with light weight fluorescent or other fixtures weighing no more than 25 lbs. Engineered to telescope from the grid with nominal ceiling clearence. Constructed of steel with internally welded safety collars.

Matthews Lightweight Telescoping Hanger - 2' - 4' With Pipe Clamp

Matthews Lightweight Telescoping Hanger - 2' - 4' With Pipe Clamp(B429722) Designed for use with lightweight fluorescent or other fixtures weighing no more than 25 lbs. Engineered to telescope from 2 to 4 ft on a lighting grid with nominal ceiling clearence. Constructed of aluminum with internally welded safety collars and cast aluminum fittings. Standard bolt end screws into the yoke of the mounted fixture. Or order an adapter pin, or stirrup. Includes a pipe clamp and safety cable.

Matthews Lightweight Telescoping Hanger- 1' - 2' With Pipe Clamp

Matthews Lightweight Telescoping Hanger- 1' - 2' With Pipe Clamp(B429720) Designed for use with lightweight fluorescent or other fixtures weighing no more than 25 lbs. Engineered to telescope from a lighting grid with nominal ceiling clearence. Constructed of aluminum with internally welded safety collars and cast aluminum fittings. Standard bolt end screws into the yoke of the mounted fixture. Or order an adapter pin, or stirrup. Includes a pipe clamp and safety cable.

Matthews Speed C Clamp

Matthews Speed C Clamp(439013) Taking a standard 10" clamp and adding Speed Rail fittings makes this clamp one of the most versatile clamps made. Riding on a standard 1-1/4" Speed Rail, this multi-purpose clamp can make any rigging challenge easier. Speed Rails are available in lengths from 10" to 20'. Matthews uses only the finest raw materials including the Matthews posi-v-lock female receivers and Jorgensen C-Clamp.

Matthews 10" C-Clamp With 2 - 1-1/8" Junior Receiver

Matthews 10" C-Clamp With 2 - 1-1/8" Junior Receiver(439010) Each clamp has a double Junior reciever. MSE manufacturers a Vertical only, Horizontal only, and a Universal Receiver clamp with infinite adjustment. Double Junior Receiver Clamps can minimize inventory requirements.

Matthews 6" C-Clamp With 2 - 1-1/8" Junior Receiver

Matthews 6" C-Clamp With 2 - 1-1/8" Junior Receiver(439006) C Clamps Matthews C Clamps are available in 4" 6" 8" 10" and 12" with or without 5/8" mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions. All Matthews C Clamps are made of forged steel.

Matthews Heavy Duty Telescoping Hanger - 2' TO 6' Triple Extension

Matthews Heavy Duty Telescoping Hanger - 2' TO 6' Triple Extension(429691) This is a Matthews Telescoping Hanger with Triple Extension. Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset, to allow the riser or drop down tube to slide up when there is sufficient room between the grid and the ceiling. It is therefore possible for a 3' Single Extension hanger to be able to go from a few inches below the grid to the fully extended 3 feet. Matthews Telescoping hangers are available in single stage and double stage. All terminate in 1/2"-13 female thread to permit the attachment of several hanging accessories listed below. An XTA Head may be added for even greater versatility, as well as the Broken Arm and a Flag as a topper, allowing for fast versatile lighting control without the need for additional hanging hardware.

Matthews Universal Hanger Adapter

Matthews Universal Hanger Adapter(429681) The Universal Hanger Adapter from Matthews Studio Equipment is specifically designed to be used with the 3' Single Extension Telescoping Hanger. It attaches to the 1/2"-13 female thread of the hanger.

Matthews Heavy Duty Telescoping Hanger - 3' TO 6' Double Extension

Matthews Heavy Duty Telescoping Hanger - 3' TO 6' Double Extension(429677) Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset, to allow the riser or drop down tube to slide up when there is sufficient room between the grid and the ceiling. It is therefore possible for a 3 Single Extension Hanger to be able to go from a few inches below the grid to the fully extended 3 feet. MSE Telescoping Hangers are available in single stage and double stage. All terminate in 1/2-13 female thread to permit the attachment of several hanging accessories listed below. An XTA Head may be added for even greater versatility. MSE Hangers are engineered with an internal mechanical stop, which will prohibit the Riser from falling through should the lock off knob be inadvertently released. This item telescopes from 3 - 6 feet.

Matthews Heavy Duty Telescoping Hanger - 5' TO 10' Double Extension

Matthews Heavy Duty Telescoping Hanger - 5' TO 10' Double Extension(429675) elescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset, to allow the riser or drop down tube to slide up when there is sufficient room between the grid and the ceiling. It is therefore possible for a 3 Single Extension Hanger to be able to go from a few inches below the grid to the fully extended 3 feet. MSE Telescoping Hangers are available in single stage and double stage. All terminate in 1/2-13 female thread to permit the attachment of several hanging accessories listed below. An XTA Head may be added for even greater versatility. MSE Hangers are engineered with an internal mechanical stop, which will prohibit the Riser from falling through should the lock off knob be inadvertently released. This item telescopes from 5 - 10 feet.

Matthews Heavy Duty Telescoping Hanger - 4' TO 8' Double Extension

Matthews  Heavy Duty Telescoping Hanger - 4' TO 8' Double Extension(429674) Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset to allow the riser or drop down tube to slide up when there is sufficient room between the grid and the ceiling.It is therefore possible for a 3' Single Extension Hanger to be able to go from a few inches below the grid to the fully extended 3 feet. MSE Telescoping Hangers are available in single stage and double stage. All terminate in 1/2-13 female thread to permit the attachment of several hanging accessories listed below. An XTA Head may be added for even greater versatility. MSE Hangers are engineered with an internal mechanical stop which will prohibit the Riser from falling through should the lock off knob be inadvertently released. When properly used MSE Hangers are the safest in the business!

Matthews Matth Gag Double

Matthews Matth Gag Double(429642) The Double Gag combines two Grip Heads onto one 1/4" mounting shaft and allows each head to be locked individually. The Double Gag is also known as a "Lollypop".

Matthews Tree Branch Holder

Matthews Tree Branch Holder(429641) The Matthews Tree Branch Holders enable the use of a real tree branch instead of a cello or wood cookie. Allowing for natural branch movement, it also hides a multitude of problems when placed in the foreground of a shot, or should the shot require, coming in from the side.

Matthews Studio Overhead Grip Arm

Matthews Studio Overhead Grip Arm(429622) Usually clamped to a grid or the railing of a catwalk, the attached Grip Head and Gobo Arm are used for positioning Flags and Cutters or other manual lighting control devices. A safety collar or pin prevent the Gobo Arm from sliding through the Grip Head

Matthews Jun Iore Triple Header

Matthews Jun Iore Triple Header(429617) Headers are expecially useful when several light fixtures are needed in a relatively small area. Mounted to a light stand, The Junior Triple header will allow the use of three larger fixtures. All female receivers are of the Posi-V-Lock design.

Matthews Mini Baby Double Header

Matthews Mini Baby Double Header(429610) Featuring heavy-duty chromed-steel construction, the Mini Baby Double Header from Matthews presents the capacity to mount four light fixtures on a stand with a "Baby" 5/8" top stud to save floor space. The accessory has four 2.25" long 5/8" pins with anti-twist knurling: two (upper and lower) at each end of the 9" long central support bar. The Header has a 5/8" receiver for the light stand. *** Please see that this is a special order item.

Matthews Heavy Duty Furniture Clamp with 5/8" Bar Clamp Adapter

Matthews Heavy Duty Furniture Clamp with 5/8" Bar Clamp Adapter(429606) This clamp can span objects from 0" to 44". Size adjustment is made by positioning one jaw anywhere along the 3/4" galvanized steel pipe 1.010 OD which then locks via its spring loaded mechanism.

Matthews 12" C-Clamp With 2 - 5/8" Baby Pins

Matthews 12" C-Clamp With 2 - 5/8" Baby Pins(429603) All MSE Clamps are made of forged steel. Each clamp has a steel channel welded to both sides of the opening for better safer locking.

Matthews 8" C - Clamp with Two 5/8" Baby Pins, Silver

Matthews 8" C - Clamp with Two 5/8" Baby Pins, Silver(429598) MSE C Clamps are available in 4, 6, 8, 10, and 12, with or without 5/8" mounting pins or Junior Receivers. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Junior Receivers are made in two fixed versions Horizontal and Vertical and a Universal Mounting Junior Receiver which can be used in any one of eight different positions. All MSE C Clamps are made of forged steel.

Matthews Furniture Clamp with 5/8" Bar Clamp Adapter - 24" Length

Matthews Furniture Clamp with 5/8" Bar Clamp Adapter - 24" Length(429593) A rough adjustment is made by releasing the spring loaded lock and sliding the adjustable half of the clamp over the serrated bar. Final tightening is done with the worm screw handle. The adapter slides over the bar and tightens with two thumb screws.

Matthews Furniture Clamps With 5/8" Bar Clamp Adapter - 18"

Matthews Furniture Clamps With 5/8" Bar Clamp Adapter - 18"(429592) Also known as Bar Clamps, a rough adjustment is made by releasing the spring loaded lock and sliding the adjustable half of the clamp over the serrated bar. Final tightening is done with worm screw handle. The Bar Clamp Adapter slides over the bar and tightens with two thumb screws. Bar Clamp Adapters are also sold separately.

Matthews Furniture Clamps With 5/8" Bar Clamp Adapter - 12"

Matthews Furniture Clamps With 5/8" Bar Clamp Adapter - 12"(429584) A rough adjustment is made by releasing the spring loaded lock and sliding the adjustable half of the clamp over the serrated bar. Final tightening is done with the worm screw handle. The adapter slides over the bar and tightens with two thumb screws.

Matthews 10" C-clamp With 2 - 5/8" Baby Pins

Matthews 10" C-clamp With 2 - 5/8" Baby Pins(429228) All MSE Clamps are made of forged steel. Each clamp has a steel channel welded to both sides of the opening for better safer locking.

Matthews Quacker clamp

Matthews Quacker clamp(429042) Known by many other names, this Quacker Clamp from Matthews is the industry-standard solution for rigging flat and lightweight light modifiers in professional production environments. The clamp is based around a vice grip platform that is adjustable for accommodating different thicknesses of bead board, foam core, or reflectors. An integrated 5/8" baby pin allows a grip to effortlessly incorporate this clamp into their setups. Once properly set, the clamp's plastic "bill" securely holds the material until the lever is popped open, making this an essential piece of equipment for on-the-fly light modification.

Matthews Chain Vice Grip With Two 5/8" Pins

Matthews Chain Vice Grip With Two 5/8" Pins(429039) Provides maximum gripping power on any size pipe up to 6" in diameter.

Matthews Wall Spreader Kit For 1.25"Pipe

Matthews Wall Spreader Kit For 1.25"Pipe(429025) The Pipe Spreader from Matthews is a 2-piece system that allows positioning a pipe between two flat surfaces like ceilings or walls. Both pieces have a receiver that accepts 1-1/4" pipe and a flat welded plate base. One of the pieces has a telescoping action to tighten the pipe's fit between the surfaces.

Matthews Wall Spreader Kit For 2" X 4" Lumber

Matthews Wall Spreader Kit For 2" X 4" Lumber(429016) Wall Spreaders are used in both horizontal and vertical positions, they are placed at each end of the pre cut lumber. With a few turns of the screw, you have a background support, or an overhead beam for hanging grip or fixtures.

Matthews The Claw For T12 Led Tubes

Matthews The Claw For T12 Led Tubes(420300) The Claw from Matthews is designed to safely mount Astera LED light tubes using a 5/8" baby pin and an adjustable tube clamp. This is a universal solution for rigging tube lights to any number of industry standard mounting points. Unlike mounting hardware where the pin mounts at a right angle to the tube, The Claw's pin mounts off the back to maintain a low profile. This allows the Astera Helios, Titan, or Hyperion to remain close to rigging points and take advantage of hard-to-reach spaces. The pin is also equipped with a female 1/4"-20 thread for further mounting flexibility. Rotate the Claw's threaded baby pin to precisely adjust the clamp's four "fingers" and the tubes are tightly secured thanks to over 180° of clamping range. This adjustment system helps to provide optimal grip strength without the possibility of crushing the housing of the light tube; internal magnets keep the clamp open while attaching a tube. While engineered with Astera tubes and the VeeBoxx softbox enclosure in mind, the Claw will also accept other T12 size linear light fixtures (available separately).

Matthews Grid Head

Matthews Grid Head(415164) Grid Head: 2.5" welded serrated plate w/grip head and grid clamp, double hand wheels, no tools required; grid clamp tensile strength exceeds 17,000 lbs; grip head offers 3/8" and 5/8" receivers w/serrations for maximum strength; works on 1-1/4" and 1-1/2" speed rail.

Matthews Magic Finger With 5/8" Adapter

Matthews Magic Finger With 5/8" Adapter(388210) One of the most popular grip accessories on the market. the 5/8" pin attached to the ball joint pivots from -15° to +90° while the collar rotates 360°. All axis lock positively with one locking handle.

Matthews Noga Arm Large

Matthews Noga Arm Large(350627) Mount almost any production accessory anywhere with the Matthews Large NOGA Articulating Arm. When fully extended, this arm will reach 22 inches, and because it's able to hold up to 11 pounds, lights, modifiers, and even cameras themselves can be secured with a twist of the knob. Each end of the arm terminates in a 5/8" baby-pin, which will accept many standard lighting and grip accessories including clamps and stand adapters. On end the baby-pin has a 1/4"-20 threaded hole, and at the other end a 3/8"-16 threaded hole for additional accessory mounting options.  

Matthews Noga Arm Medium

Matthews Noga Arm Medium(350626) Mount almost any production accessory anywhere with the Matthews Medium NOGA Articulating Arm. When fully extended, this arm will reach 10.5 inches, and because it's able to hold up to 13.2 pounds, lights, modifiers, and even cameras themselves can be secured with a twist of the lever. Each end of the arm terminates in a 5/8" baby-pin, which will accept many standard lighting and grip accessories including clamps and stand adapters.

Matthews Micro-Grip Master Kit

Matthews Micro-Grip Master Kit(350612) The MICROgrip Master Kit from Matthews gives you a complete set of nimble, miniaturized MICROgrip mounting and grip products--you have all the same moves and features as a 2 1/2" grip head available, but in a more compact (1.25"/32mm diameter) package. Included in this master kit are 6 MICROgrip grip heads, 2 weighted bases, 2 each of 4", 6", 8", 12", and 20" rods (3/8" diameter), 2 MICROgrip shot bags (1 lb each), 1 clip (3/8" thread), and 1 1/4" to 5/8" pin. Available separately are a wide variety of micro scrims and flags. The MICROgrip master kit is particularly suited to tabletop, product and miniature work. Allows all of the moves and features of its bigger 2 1/2" counterpart, but in a smaller (1.25"/32mm) package Ideal for tabletop and product imaging as well as miniature work   A wide variety of clips, micro scrims and flags, etc. and several lengths of 3/8" rod are available

Matthews Micro-Grip Basic Kit

Matthews Micro-Grip Basic Kit(350611) The MICROgrip Basic Kit from Matthews gives you all the basics for using their nimble, miniaturized MICROgrip mounting and grip products--you have all the same moves and features as a 2 1/2" grip head, but in a more compact (1.25"/32mm diameter) package. Included in this basic kit are 2 MICROgrip grip heads, a weighted base, 1 each of 8", 12", and 20" rods (3/8" diameter), and a MICROgrip shot bag. Available separately are a wide variety of clips to hold props and objects, plus a wide variety of micro scrims and flags. The MICROgrip basic kit is particularly suited to tabletop, product and miniature work. Allows all of the moves and features of its bigger 2 1/2" counterpart, but in a smaller package Diameter is only 1.25" (32mm) Ideal for tabletop and product imaging as well as miniature work   A wide variety of clips, micro scrims and flags, etc. and several lengths of 3/8" rod are available

Matthews Foam Core Holder

Matthews Foam Core Holder(209495) Made with a pivoting ball for easier adjustment, the foam core or bead board is taped to the flat plate. The Foam Core Holder is also often used to hold small mirrors for reflecting Xenon light beams around a set.

Matthews Gobo Plate Media Mount (Vesa)

Matthews Gobo Plate Media Mount (Vesa)(30027) Matthews Studio Equipment, Inc. expands the Gobo Plate™ line with an affordable on-set grip tool that’s easy for anyone to use. Gobo Plate™ Media Mount is designed to rapidly and safely mount monitors onto C-Stands using standard 2.5” Grip heads. The simplicity and versatility of the Gobo Plate™ Media Mount system offers speed and adaptability amongst the ever-changing nature of set work, allowing montiors to be mounted wherever necessary and easily adjusted whenever necessary.

Matthews Super Vator III with Narrow Base

Matthews Super Vator III with Narrow Base(521010) 30 Years in Development... During the past thirty plus years Matthews Studio Equipment has supplied the production community with heavy-duty VATOR cranking stands. From Low Boy VATORS to the SUPER Crank-O-Vators, productions around the world have learned to trust Matthews VATORS for reliable, robust and strong large fixture support. Matthews now introduces the next generation of VATOR stands: VATOR III. The VATOR III family of dependable, safe, cranking stands continues the respected operating and performance characteristics of the past VATORS, while adding new models and features. As always, safey and low maintenance are both key factors in the design, engineering and manufacture on the VATOR III stands. VATOR III stands are manufactured using the latest CAD-CAM techniques, precision laser cutting/machining and CNC machining to ensure accuracy and dependability. The 'core' of the VATOR III stands is the precision rack and pinion gear drive mechanism that reduces components within the drive train to only two moving parts. This ensure years of reliable operation with minimal maintenance. Matthews has such great confidence in the new VATOR III stands that each stand is covered by a three year warranty under normal operating conditions. Excludes wheels and tires. From the Low Boy single riser through the Super VATOR III, this new family of Matthews heavy-duty lighting stands will certainly set new standards in reliable large fixture lighting support.

Matthews Century Stand Door Rack

Matthews Century Stand Door Rack(429658) It Holds up to 6 Century "C" Stands securely to a wall, or flat.

Matthews Combo Door Stand Rack - 5X

Matthews Combo Door Stand Rack - 5X(429655) The Matthews Combo Stand Door Rack is used to store stands vertically on walls or truck doors. It will hold up to five Combo stands.

Matthews Combo Stand Door Rack 6x

Matthews Combo Stand Door Rack 6x(429654) The Matthews Combo Stand Door Rack 6x is used to store Combo Stands vertically on walls or truck doors. It will hold up to six stands.

Matthews Mombo Combo Stand Door Rack 4x

Matthews Mombo Combo Stand Door Rack 4x(429653) The Matthews Mombo Combo Stand Door Rack 4x is used to store Mombo Combo Stands vertically on walls or truck doors. It will hold up to four stands.

Matthews Baby stand - Pony

Matthews Baby stand - Pony(386044) Heavy-duty and rugged, these aluminium and steel stands can withstand the rigors of location shooting. Preemie Baby stands are made with square tubular legs for additional strength. Smaller versions of Beefy Baby Stands are known as Mini Preemie and Preemie Baby Stands or ÄúPony / Äù Stands.

Matthews Hollywood Triple Riser Stand With 4.5" Grip Head

Matthews Hollywood Triple Riser Stand With 4.5" Grip Head(369770) Roller Stands, or Overhead Stands as they are often called, utilize all steel tubes and legs. Developed for flying Butterflies and Overheads on location and supporting large backdrops in studios. These stands feature wide bases for stability and terminate in the new 4.5” Grip Head. Plates now feature two holes of 3/8” and 5/8” diameter that eliminate any confusion. New castings offer positive lock in all directions. The strongest and most popular 4-1/2” Grip Head in the industry, guaranteed to hold. Matthews casters are locking and non-marking. Made from steel components – not plastic – and will provide years of durable service.

Matthews Hollywood Combo - Double Riser Aluminum Stand

Matthews Hollywood Combo - Double Riser Aluminum Stand(369764) This Matthews Hollywood Combo Aluminum Stand has a wide 43" footprint and extra-long legs to provide stability. It rises to a maximum height of 11.3'. The Hollywood Combo accepts larger Junior fixtures with its 1 1/8" receptor, and small fixtures with its 5/8" Baby spigot. This stand features a "Rocky Mountain Leg" to aid in leveling a load on uneven terrain.   The Hollywood Combo Stand is a durable, time-tested solution for rigging lighting fixtures. Lights equipped with junior pins slot directly into the top of the stand, which is rated with a maximum weight capacity of 50 lb. A spring-loaded 5/8" baby pin instantly pops up to transform the stand into a heavy-duty support platform for smaller light fixtures. These units can reach heights up to 11.3', a range inaccessible by C-stands. One can also insert a 4-1/2" "lollipop" grip head into the junior receiver to set high-flying flags or start off a quick goal-post style rig (available separately). With the exception of its hard plastic feet, this stand is constructed entirely of aluminum to provide a stable base for lights while maintaining portability. This makes it an excellent choice for home studios or traveling owner-operator kits. A sliding "Rocky Mountain" adjustable leg is integrated into the stand in order to adapt to inclines and other unsteady terrains. This leg and the rest of the stand's points of extension lock down with V-shaped brass brakes that provide three strong points of contact for optimal safety.

Matthews Combo Adapter Wheels - Set Of 3

Matthews Combo Adapter Wheels - Set Of 3(366068) Used on the Hollywood Combo Stand, this new version has been totally redesigned for greater strength and stability. It has unique locking system that does not require any type of receiving hole in the leg of the stand. The 4" wheels are easy to put on and take off.

Matthews Sky High Combo Triple Riser Steel Stand

Matthews Sky High Combo Triple Riser Steel Stand(366065) The Sky High Combo Steel Wheeled Stand from Matthews has a rugged design and features a Rocky Mountain leg for leveling its load on uneven terrain. This triple riser stand extends to a maximum height of over 15 feet.

Matthews VeeBoxx Kit- SoftBox For Astera40" Titan Led Tube

Matthews VeeBoxx Kit- SoftBox For Astera40" Titan Led Tube(999072) The VeeBoxx Kit for Astera Titan from Matthews is a portable soft box enclosure that quickly transforms the Astera 40" Titan LED tube to a diffused lighting source. The VeeBoxx includes three removable front panel diffusion options including the Voodoo Cloth, a 1/2 Grid (Lite), and a 1/4 Grid for versatile lighting options. The lightweight black ripstop nylon body prevents light loss, and strategically placed internal and external hook and loop fasteners secure the panel to the body and allow for control grid attachment. The reflective silver interior maximizes light output, and a rear zippered opening runs the length of the body to allow access to the tube controls. The Claw light clamp is included and can be attached anywhere you require. The VeeBoxx folds up accordion-style for easy transport.

Matthews Cross Dovetail Plate

Matthews Cross Dovetail Plate(417015) Expand your camera rig positioning options with the 2-Layer Swiveling Dovetail Cross Plate from Matthews. This 2-layer plate swivels to create a 45 or 90° angle in addition to a straight position. It features multiple 3/8"-16 and 1/4"-20 helicoidal threads for mounting on a tripod and is compatible with most standard camera bridge plates. A spring-loaded post and a stationary stop prevent unintended slips. 2-Layer Design The innovative 2-layer design enables you to position your camera rig at a standard, 45 or 90° angle. Safety Features A spring-loaded post and a stationary stop provide secure mounting. Helicoidal threads increase security on the 1/4"-20 and 3/8"-16 mounts. Compatibility Most major brand bridge plates.

Matthews LB2 - Location Baby Bracket

Matthews LB2 - Location Baby Bracket(429810) he LB2 Location Baby Bracket by Matthews adds the ability to easily mount your gear onto existing architecture, such as posts, overhead beams, or certain flat surfaces. It consists of a 5/8" knurled baby pin with a custom bracket. The LB2 provides a secure rigging point in environments where the use of stands or permanent mounting hardware is unavailable or inconvenient. Two ratchet straps are threaded through the precisely machined slot. Nearly any round or square beam can carry the bracket simply by using longer straps. Proper setup of the LB2 will prevent dents and scuffs from being left behind, making this an ideal solution for shoots in rented homes or public spaces. While designed for temporary sets in mind, the LB2 can also be installed for long-term use thanks to four open screw holes.

Matthews Gator Buddy - Foamcore Holder

Matthews Gator Buddy - Foamcore Holder(420320) Designed by a photographer to simplify studio photography, the Gatorbuddy and V-Flat Holder from Matthews Studio Equipment is a compact, sturdy, and mobile support base for handling V-flats, reflectors, or bounce and fill cards. Threads and mounts of multiple sizes, including three baby risers with 5/8" baby pins, make the four-wheeled base a versatile set tool for ingenious problem solving. The Gatorbuddy has a load capacity of 50 lb and two lockable wheels for secure mounting of third-party accessories. The V-flat holder has an adjustable angle and a channel to accommodate foam core up to 3/4" thick. Low profile steel base with black powder coat finish Center slider knob allows positioning gator board angles up to 15° Adjustable angle V-Flat channel accepts up to 3/4" thick foam core Four threaded inserts are configured to accept a Jr wall plate Aluminum baby risers snap-in to base via durable black plastic clips Eight 3/8”-16 tapped inserts Durable Tente casters   Pegboard slots for easy wall storage

Matthews Hollywood Pro 40" C-Stand with Sliding Leg,Low Profile Leg, includes Grip Head & Arm

Matthews Hollywood Pro 40" C-Stand with Sliding Leg,Low Profile Leg, includes Grip Head & Arm(MD-339567) This is a Matthews Hollywood Pro Stand with 40" double riser, and a sliding leg, low-profile base. It includes a grip head and 40" stainless steel arm. The advantage of the low profile Pro legs is easier positioning of the stand under furniture or other set items.   The unique staggered leg design of a C Stand allows it to be nested and placed extremely close to one another on a set. The top leg of the stand is independently adjustable to ease placement on stairs or uneven terrain.

Matthews 29" Stainless Steel Diffusion Kit

29" Stainless Steel Diffusion Kit - 455421E Matthews Stainless Wire Diffusion (SST) is impervious to rust and holds up well under uneven, intense heat, thus making it preferable for use with open face or Fresnel lighting fixtures. Stainless Scrims do not diffuse the light; their function is to reduce light output at the source. Scrims do not affect the color temperature and produce no electronic interference. They may be stacked to achieve limitless variation of light intensity. Available from 5" to 29" to meet the requirements of almost any professional light in the industry. Scrims are available in single, double, half single, and half double configurations. Halves are employed to reduce a portion of the beam and are commonly used when the light is striking the plane of the subject or background at an angle. The half reduces the light falling on the nearest part of the plane to balance with the light reaching the most distant part of the plane.

Matthews 19-1/2" Stainless Steel Diffusion Kit

19-1/2" Stainless Steel Diffusion Kit - 455417E Matthews Stainless Wire Diffusion (SST) is impervious to rust and holds up well under uneven, intense heat, thus making it preferable for use with open face or Fresnel lighting fixtures. Stainless Scrims do not diffuse the light; their function is to reduce light output at the source. Scrims do not affect the color temperature and produce no electronic interference. They may be stacked to achieve limitless variation of light intensity. Available from 5" to 29" to meet the requirements of almost any professional light in the industry. Scrims are available in single, double, half single, and half double configurations. Halves are employed to reduce a portion of the beam and are commonly used when the light is striking the plane of the subject or background at an angle. The half reduces the light falling on the nearest part of the plane to balance with the light reaching the most distant part of the plane.

Matthews 15-1/2" Stainless Steel Diffusion Kit

15-1/2" Stainless Steel Diffusion Kit - 455414E Matthews Stainless Wire Diffusion (SST) is impervious to rust and holds up well under uneven, intense heat, thus making it preferable for use with open face or Fresnel lighting fixtures. Stainless Scrims do not diffuse the light; their function is to reduce light output at the source. Scrims do not affect the color temperature and produce no electronic interference. They may be stacked to achieve limitless variation of light intensity. Available from 5" to 29" to meet the requirements of almost any professional light in the industry. Scrims are available in single, double, half single, and half double configurations. Halves are employed to reduce a portion of the beam and are commonly used when the light is striking the plane of the subject or background at an angle. The half reduces the light falling on the nearest part of the plane to balance with the light reaching the most distant part of the plane.

Matthews 13-1/2" Stainless Steel Diffusion Kit

13-1/2" Stainless Steel Diffusion Kit - 455413E Matthews Stainless Wire Diffusion (SST) is impervious to rust and holds up well under uneven, intense heat, thus making it preferable for use with open face or Fresnel lighting fixtures. Stainless Scrims do not diffuse the light; their function is to reduce light output at the source. Scrims do not affect the color temperature and produce no electronic interference. They may be stacked to achieve limitless variation of light intensity. Available from 5" to 29" to meet the requirements of almost any professional light in the industry. Scrims are available in single, double, half single, and half double configurations. Halves are employed to reduce a portion of the beam and are commonly used when the light is striking the plane of the subject or background at an angle. The half reduces the light falling on the nearest part of the plane to balance with the light reaching the most distant part of the plane.

Matthews 13" Stainless Steel Diffusion Kit

13" Stainless Steel Diffusion Kit - 455412E Matthews Stainless Wire Diffusion (SST) is impervious to rust and holds up well under uneven, intense heat, thus making it preferable for use with open face or Fresnel lighting fixtures. Stainless Scrims do not diffuse the light; their function is to reduce light output at the source. Scrims do not affect the color temperature and produce no electronic interference. They may be stacked to achieve limitless variation of light intensity. Available from 5" to 29" to meet the requirements of almost any professional light in the industry. Scrims are available in single, double, half single, and half double configurations. Halves are employed to reduce a portion of the beam and are commonly used when the light is striking the plane of the subject or background at an angle. The half reduces the light falling on the nearest part of the plane to balance with the light reaching the most distant part of the plane.

Matthews Frame, 12'X12' Snap a Part, 1" SQ

Frame, 12'X12' Snap a Part, 1" SQ - 409312 All square frames 8'x8' and larger, feature the 'Quick Reverse Ear' which will enable the removal and reversal for quick 180deg. frame re-positioning.

Matthews 24"x72" Cutter Frame

24"x72" Cutter Frame - 539288 Newly designed 90 degree Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48""x48"" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material. They are used to control light, whether natural or artificial. Flags can be used to protect the camera lens from flares or to control spill light from other sources, or to keep light from reaching certain areas on the set. Known as Flags up to sizes 24""x36"", larger or more irregular sizes are referred to as Cutters. Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Velcro until needed at which time the Flag or Cutter becomes twice its original size. Use the number with a (B) after it for Bottom Hinge and the number with a (T) after to specify Top Hinge. See Pin configuration illustration shown below. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing.

Matthews 20'x20' Frame 1-1/4" SQ

20'x20' Frame 1-1/4" SQ - 409520 by Matthews Studio Equipment. Matthews offers a wide variety of frames to hold your overheads and butterflys. Hollywood Frames feature corners that contain all tubes in a captive state. No more loose pieces that could be lost. 

Matthews 8'x8' Snap a Part Frame, 1" SQ

8'x8' Snap a Part Frame, 1" SQ - 409308 This Matthews Butterfly/Overhead Snap-A-Part Frame - 8x8' features the Quick Reverse Ear which will enable the removal and reversal for quick 180° frame repositioning.

Matthews Scrim/Flag Survival Kit

Scrim/Flag Survival Kit - 999006

Matthews Silver Leaf - 500 Sheets

Matthews Silver Leaf - 500 Sheets(139341) Includes 500 sheets silver paper.

Matthews Gold Leaf - 500 Sheets

Matthews Gold Leaf - 500 Sheets(139092) Includes 500 sheets gold leaf.

Matthews Lighting Control Kit, 18"X24"

Lighting Control Kit, 18"X24" - 999012 Lighting Control Carrying Bags are made of 1000 denier polyester fabric exterior shell with heavy duty zippered closure and carrying handles. The inside is lined with corrugated plastic to protect the contents and provide stiffness.

Matthews Lighting Control Kit, 24"X36"

Lighting Control Kit, 24"X36" - 999013 Lighting Control Carrying Bags are made of 1000 denier polyester fabric exterior shell with heavy duty zippered closure and carrying handles. The inside is lined with corrugated plastic to protect the contents and provide stiffness.

Matthews Elephant Block 2" Set W/Holder

Elephant Block 2" Set W/Holder - 259570 Take a really abstract approach to an already field-proven design and you get a product with a 'footprint' that offers greater stability. As a result of having a larger surface area and by having three feet, it makes leveling a whole lot easier! We just couldn't call it anything else - Elephant Blocks! Manufactured of the highest quality 9-ply 'Baltic Birch' plywood, Elephant Blocks replace conventional Basso Blocks. The improved design allows them to stack in limitless configurations in 1" increments while accomplishing the same elevating function and support as Bassos. And they occupy less space! Elephant Blocks...now that's a real trunk full!

Matthews Elephant Block 4" Set W/Holder

Elephant Block 4" Set W/Holder - 259568 Take a really abstract approach to an already field-proven design and you get a product with a 'footprint' that offers greater stability. As a result of having a larger surface area and by having three feet, it makes leveling a whole lot easier! We just couldn't call it anything else - Elephant Blocks! Manufactured of the highest quality 9-ply 'Baltic Birch' plywood, Elephant Blocks replace conventional Basso Blocks. The improved design allows them to stack in limitless configurations in 1" increments while accomplishing the same elevating function and support as Bassos. And they occupy less space! Elephant Blocks...now that's a real trunk full!

Matthews Black Double Scrim, 48"X48"

Black Double Scrim, 48"X48"  To keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames stainless steel for durability. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing.

Matthews Black Single Scrim, 48"X48"

Black Single Scrim, 48"X48" - 159013 To keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames stainless steel for durability. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing.

Matthews White China Silk, 24"X36"

White China Silk, 24"X36" - 149556 Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. Open Ends are used to control or manipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color coded binding is used around the frame to identify the fabric. Matthews Open End Frames are black powder coated to minimize unwanted reflections.

Matthews White China Silk, 24"X30"

White China Silk, 24"X30" - 149557 Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from a C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. Open Ends are used to control or manipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color coded binding is used around the frame to identify the fabric. Matthews Open End Frames are black powder coated to minimize unwanted reflections.

Matthews Hollywood Frame, 12'X12' 1" SQ

Hollywood Frame, 12'X12' 1" SQ - 409112 Known for its structural integrity, this Matthews Butterfly/Overhead Hollywood Frame holds reflectors, diffusion and other light-modifying materials. Matthews offers a wide variety of optional materials to create your own custom Butterfly or Overhead.

Matthews Hollywood Frame, 8'X8' 1" SQ

Hollywood Frame, 8'X8' 1" SQ - 409108 Known for its structural integrity, this Matthews Butterfly/Overhead Hollywood Frame holds reflectors, diffusion and other light-modifying materials. Matthews offers a wide variety of optional materials to create your own custom Butterfly or Overhead.

Matthews Hollywood Frame, 6'X6' 1" SQ

Hollywood Frame, 6'X6' 1" SQ - 409106 Known for its structural integrity, this Matthews Butterfly/Overhead Hollywood Frame holds reflectors, diffusion and other light-modifying materials. Matthews offers a wide variety of optional materials to create your own custom Butterfly or Overhead.

Matthews Single Scrim, 12'X12'

Single Scrim, 12'X12' - 319087 All fabrics were tested in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital meter.

Matthews Single Scrim, 8'X8'

Single Scrim, 8'X8' - 319400 All fabrics were tested in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital meter.

Matthews Reflector Box, 42"X42" 2 Place

Reflector Box, 42"X42" 2 Place - 119123 Reflector Boxes are made of solid wood to protect your Reflectors. They are available in two sizes: 24" x 24" and 42" x 42", with slots to hold 2 or 4 Reflectors depending on your needs.

Matthews Reflector Box, 24"X24" 4 Place

Reflector Box, 24"X24" 4 Place - 119055 Reflector Boxes are made of solid wood to protect your Reflectors. They are available in two sizes: 24" x 24" and 42" x 42", with slots to hold 2 or 4 Reflectors depending on your needs.

Matthews Dot & Finger Survival Kit

Matthews Dot & Finger Survival Kit(999003) This is a well-furnished dot-and-finger kit. Shape, soften or diminish the light from your fixtures. Sizes range from 3 to 10", suitable for small to medium product setups, or full-length portraits.

Matthews Scrim/Flag Box, 18"X24"

Scrim/Flag Box, 18"X24" - 179541 Scrim / Flag Boxes are made of solid wood to protect reflectors, and may hold up to ten pieces per box.

Matthews Scrim/Flag Box, 24"X30"

Scrim/Flag Box, 24"X30" - 179541 Scrim / Flag Boxes are made of solid wood to protect reflectors, and may hold up to ten pieces per box.

Matthews Flag Bag, 48"X48"

Flag Bag, 48"X48" - 309304 The Matthews Flag Bags or Scrim Storage Bags are made of 1000 denier polyester fabric exterior shell with a heavy duty zippered closure and carrying handles. The inside is lined with a corrugated plastic to protect the contents and provide stiffness. The interior corrugated liner is replaceable and the bag is provided with one divider of the same material. Additional dividers are available. The Flag Bags will hold eight to ten Flags each. The Scrim Bags hold five.

Matthews Flag Bag, 24"X36"

Flag Bag, 24"X36" - 309302 The Matthews Flag Bags or Scrim Storage Bags are made of 1000 denier polyester fabric exterior shell with a heavy duty zippered closure and carrying handles. The inside is lined with a corrugated plastic to protect the contents and provide stiffness. The interior corrugated liner is replaceable and the bag is provided with one divider of the same material. Additional dividers are available. The Flag Bags will hold eight to ten Flags each. The Scrim Bags hold five.

Matthews Flag Bag, 18"X24"

Flag Bag, 18"X24" - 309301 The Matthews Flag Bags or Scrim Storage Bags are made of 1000 denier polyester fabric exterior shell with a heavy duty zippered closure and carrying handles. The inside is lined with a corrugated plastic to protect the contents and provide stiffness. The interior corrugated liner is replaceable and the bag is provided with one divider of the same material. Additional dividers are available. The Flag Bags will hold eight to ten Flags each. The Scrim Bags hold five.

Matthews Cucoloris, Cello 24"X36"

Cucoloris, Cello 24"X36" - 199102 The Cucoloris is used to create shadow patterns on backgrounds or subjects. A flat lit wall can be broken up into interesting pools of light and shadow. Lighting directors frequently use them to simulate sunlight filtering through trees. While the wood "cookies" create a distinctive pattern, the Cello "cookie" projects a more subtle pattern. The pattern itself depends on the distance of the light source and the distance to the background.

Matthews Cucoloris, Wood 18"X24"

Cucoloris, Wood 18"X24" - 189093 The Cucoloris is used to create shadow patterns on backgrounds or subjects. A flat lit wall can be broken up into interesting pools of light and shadow. Lighting directors frequently use them to simulate sunlight filtering through trees. While the wood "cookies" create a distinctive pattern, the Cello "cookie" projects a more subtle pattern. The pattern itself depends on the distance of the light source and the distance to the background.

Matthews Cucoloris, Wood 24"X36"

Cucoloris, Wood 24"X36" - 189094 The Cucoloris is used to create shadow patterns on backgrounds or subjects. A flat lit wall can be broken up into interesting pools of light and shadow. Lighting directors frequently use them to simulate sunlight filtering through trees. While the wood "cookies" create a distinctive pattern, the Cello "cookie" projects a more subtle pattern. The pattern itself depends on the distance of the light source and the distance to the background.

Matthews Cucoloris, Wood 48"X48"

Cucoloris, Wood 48"X48" - 189091 The Cucoloris is used to create shadow patterns on backgrounds or subjects. A flat lit wall can be broken up into interesting pools of light and shadow. Lighting directors frequently use them to simulate sunlight filtering through trees. While the wood "cookies" create a distinctive pattern, the Cello "cookie" projects a more subtle pattern. The pattern itself depends on the distance of the light source and the distance to the background.

Matthews Gel Frame, 48"X48"X3/4"

Gel Frame, 48"X48"X3/4" - 549100 The flat edges of these frames make it ideal for quick gel changes using 2-sided tape.

Matthews Gel Frame, 36"X36"X3/4"

Gel Frame, 36"X36"X3/4" - 549099 The flat edges of these frames make it ideal for quick gel changes using 2-sided tape.

Matthews Meat Axe Flag, 24"X48"

Meat Axe Flag, 24"X48" - 169030 Flags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set.

Matthews Flag 40"X40"

Flag 40"X40" - 169179 Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control.

Matthews Road Flag Artificial Silk

Road Flag Artificial Silk - 169193 The Matthews RoadFlag Artificial Silk fabric fits your Matthews 48 x 48" RoadFlag Collapsible Frame. Artificial silk diffuses and diminishes transmitted light by about 1.5 stops.

Matthews Road Flag Floppy

Road Flag Floppy - 169207

Matthews Road Flag Silver Lame

Road Flag Silver Lame - 169198 Matthews Road Flag Silver Lame, versatile solution to duplicating studio lighting effects on location. Designed for today's highly mobile, location shooter - portable solution

Matthews Road Flag Solid

Road Flag Solid - 169197 Matthews Road Flag Solid, versatile solution to duplicating studio lighting effects on location. Designed for today's highly mobile, location shooter - portable solution

Matthews Road Flag II Kit

Road Flag II Kit - 999028 Matthews Studio Equipment presents a new, versatile solution to duplicating studio lighting effects on location.  Designed for today's highly mobile, location shooter, RoadFlagsII offers a larger 4' x 4' (122cm x 122cm) surface lighting modification in a convenient, easy-to-use portable kit.  The "slip-on" fabrics allow for fast setup and packaging while offering larger fabric sizes to create a multitude of lighting effects. RoadFlagsII Kit packs into a lightweight, self-contained easy-to-handle 28" x 50" (71cm x 127cm) soft bag.  RoadFlagsII Kit will easily pack into any automobile or location vehicle. In addition to the list of fabrics included in a RoadFlagsII Kit, additional SLIP-ON light modification fabrics are available for RoadFlagsII and as instant recovers for standard 48"x48" frames.  Now there is no need to return the frames to the factory for recovering.

Matthews Griff Clips - 2 Packages Of 50

Griff Clips - 2 Packages Of 50 - 719702 Griff Clips let you instantly have rope tie downs anywhere you want them.

Matthews Unbleached Muslin, Seamless, 12'X12'

Unbleached Muslin, Seamless, 12'X12' - 309660 The Unbleached Muslin Overhead Fabric is tied to a butterfly/overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (grid cloths, black silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Unbleached Muslin, Seamless, 8'X8'

Unbleached Muslin, Seamless, 8'X8' - 309624 The Unbleached Muslin Overhead Fabric is tied to a butterfly/overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (grid cloths, black silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Unbleached Muslin, Seamless, 6'X6'

Unbleached Muslin, Seamless, 6'X6' - 309623 The Unbleached Muslin Overhead Fabric is tied to a butterfly/overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (grid cloths, black silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Bleached Muslin, Seamless, 12'X12'

Bleached Muslin, Seamless, 12'X12' - 309658 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Bleached Muslin, Seamless, 8'X8'

Bleached Muslin, Seamless, 8'X8 - 309619 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Bleached Muslin, Seamless, 6'X6

Bleached Muslin, Seamless, 6'X6 - 309618 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Bleached Muslin, Seamed, 20'X20'

Bleached Muslin, Seamed, 20'X20' - 309621 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Silent 1/4 Grid Cloth, 6'X6'

Silent 1/4 Grid Cloth, 6'X6' - 319149 This is a Matthews 6 x 6 ft, grommeted Silent 1/4 Gridcloth, to fit any Matthews, or other brand or make frame. 6 x 6 ft Butterflies measure approximately 5.8 x 5.8 ft. Matthews fabrics are tested for even light distribution in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital light meter.

Matthews Silent Lite Grid Cloth, 12'X12'

Silent Lite Grid Cloth, 12'X12' - 319118 This is a Matthews 6 x 6 ft, grommeted Silent Gridcloth, to fit any Matthews, or other brand or make frame. 6 x 6 ft Butterflies measure approximately 5.8 x 5.8 ft. Matthews fabrics are tested for even light distribution in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital light meter.

Matthews Silent Lite Grid Cloth, 8'X8'

Silent Lite Grid Cloth, 8'X8' - 319119 This is a Matthews 6 x 6 ft, grommeted Silent Gridcloth, to fit any Matthews, or other brand or make frame. 6 x 6 ft Butterflies measure approximately 5.8 x 5.8 ft. Matthews fabrics are tested for even light distribution in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital light meter.

Matthews Silent Lite Grid Cloth, 6'X6'

Silent Lite Grid Cloth, 6'X6' - 319784 This is a Matthews 6 x 6 ft, grommeted Silent Gridcloth, to fit any Matthews, or other brand or make frame. 6 x 6 ft Butterflies measure approximately 5.8 x 5.8 ft. Matthews fabrics are tested for even light distribution in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital light meter.

Matthews Silent Grid Cloth, 12'X12'

Silent Grid Cloth, 12'X12' - 319786 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Silent Grid Cloth, 8'X8'

Silent Grid Cloth, 8'X8' - 319820 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Silent Grid Cloth, 6'X6'

Silent Grid Cloth, 6'X6' - 319785 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Matthbounce, 20'X20'

Matthbounce, 20'X20' - 319012 This is a reversible Matthews 6x6' Matthbounce White/Black Fabric with grommets designed to be tied to a Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (grid cloths, black silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors and Grifflectors.

Matthews Matthbounce, 12'X12'

Matthbounce, 12'X12' - 319011 This is a reversible Matthews 6x6' Matthbounce White/Black Fabric with grommets designed to be tied to a Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (grid cloths, black silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors and Grifflectors. The item is custom made on requests, and it is non returnable.  

Matthews Matthbounce, 6'X6'

Matthbounce, 6'X6' - 319009 This is a reversible Matthews 6x6' Matthbounce White/Black Fabric with grommets designed to be tied to a Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (grid cloths, black silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors and Grifflectors.

Matthews Black Solid, 20'X20'

Black Solid, 20'X20' - 319524 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Black Solid, 12'X12'

Black Solid, 12'X12' - 319089 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Black Solid, 8'X8'

Black Solid, 8'X8' - 319402 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Black Solid, 6'X6'

Black Solid, 6'X6' - 309083 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Silver Lame, 12'X12'

Silver Lame, 12'X12' - 309104 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Silver Lame, 8'X8'

Silver Lame, 8'X8' - 309102 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Silver Lame, 6'X6'

Silver Lame, 6'X6' - 309100 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews White China Silk, 12'X12'

White China Silk, 12'X12' - 319609 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews White China Silk, 8'X8'

White China Silk, 8'X8' - 319404 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews White China Silk, 6'X6'

White China Silk, 6'X6' - 309605 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews White 1/4 Stop Silk, 12'X12'

White 1/4 Stop Silk, 12'X12' - 319613 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews White 1/4 Stop Silk, 8'X8'

White 1/4 Stop Silk, 8'X8' - 319405 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews White 1/4 Stop Silk, 6'X6'

White 1/4 Stop Silk, 6'X6' - 309610 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews White Artificial Silk, 20'X20'

White Artificial Silk, 20'X20' - 319544 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews White Artificial Silk, 12'X12'

White Artificial Silk, 12'X12' - 319000 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews White Artificial Silk, 8'X8'

White Artificial Silk, 8'X8' - 319403 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames. *** Please see that this item is a Special order item

Matthews White Artificial Silk, 6'X6'

White Artificial Silk, 6'X6' - 309084 Also known as "Rags" these are the materials that are tied to the Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Digital Blue/Green 12'X12'

Matthews Digital Blue/Green 12'X12' - 319164 The Matthews 12 x 12' Blue/Green Digital Screen is a must for anyone who shoots digital photography. This handy background can be quick-reversed depending on which color you need. It is made from a rugged polyester fabric manufactured under strict dye-lot controls. The reversible design is a real time- and cost-saver since it eliminates the need to buy separate screens. However, if you desire, Matthews produces the same material in solid Green, solid Blue, and solid White. Digital fabric is a very bright, highly reflective surface that requires less light to illuminate. HD shooters will find this surface particular attractive to work with since they won't need as much wattage for their shoots.  The fabric attaches to your stand with grommets located at each corner and evenly spaced on each side. The material can be hand-washed using a mild soap, but should not be machine washed. These screens have been used by leading rental houses and major Hollywood productions such as the effects-driven feature "Iron Man". Krakow, Poland's DigiCinema is covering their entire studio with Matthews Screen material.   Matthews Studio Equipment is a 40-year-old manufacturer of industry specialized hardware and lighting control devices. Based in Burbank, California, Matthews supports productions in over 55 countries throughout the world.

Matthews Digital Blue/Green 8'X8'

Matthews Digital Blue/Green 8'X8' - 319165 The Matthews 6 x 6' Blue/Green Digital Screen is a must for anyone who shoots digital photography. This handy background can be quick-reversed depending on which color you need. It is made from a rugged polyester fabric manufactured under strict dye-lot controls. The reversible design is a real time- and cost-saver since it eliminates the need to buy separate screens. However, if you desire, Matthews produces the same material in solid Green, solid Blue, and solid White. Digital fabric is a very bright, highly reflective surface that requires less light to illuminate. HD shooters will find this surface particular attractive to work with since they won't need as much wattage for their shoots.  The fabric attaches to your stand with grommets located at each corner and evenly spaced on each side. The material can be hand-washed using a mild soap, but should not be machine washed. These screens have been used by leading rental houses and major Hollywood productions such as the effects-driven feature "Iron Man". Krakow, Poland's DigiCinema is covering their entire studio with Matthews Screen material. Matthews Studio Equipment is a 40-year-old manufacturer of industry specialized hardware and lighting control devices. Based in Burbank, California, Matthews supports productions in over 55 countries throughout the world.

Matthews Digital Green, 20'X20'

Digital Green, 20'X20' - 319793 For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Digital Green, 12'X12'

Digital Green, 12'X12' - 319792 For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Digital Green, 8'X8'

Digital Green, 8'X8' - 319790 For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Chromakey Blue/Green 20'X20'

Chromakey Blue/Green 20'X20' - 319159 For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Chromakey Blue/Green 12'X12'

Chromakey Blue/Green 12'X12' -  319160 For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Chromakey Blue/Green 8'X8'

Chromakey Blue/Green 8'X8' - 319161 For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Chromakey Green, 6'X6'

Chromakey Green, 6'X6' 309115 For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews Chromakey Blue, 8'X8'

Chromakey Blue, 8'X8' - 319436 For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (Grid Cloths, Black Silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial light such as Matthflectors, Grifflectors and Lames.

Matthews 8' X 8' Butterfly Scrim

8' X 8' Butterfly Scrim - 319401 All fabrics were tested in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital meter.

Matthews 6' X 6' Butterfly Scrim

' X 6' Butterfly Scrim 309081 Used For lighting control 

Matthews - Mitchell to Elemac Adapter

Matthews - Mitchell to Elemac Adapter - 515025 The Matthews 515025 Mitchell to Elemack Arm Adapter facilitates the attachment of a fluid head with a Mitchell base to an Elemack jib arm.

Matthews 10" Vacuum Cup

10" Vacuum Cup - 417023 The 10" Vacuum Cup is a heavy-duty style vacuum cup. Pump until the red marker disappears to create an amazing bond to nonporous surfaces such as car hoods and doors. Use in conjunction with the 4-Way Tilt Plate for interesting camera angles and a camera tie down strap to ensure proper safety precautions. Should you require a smaller vacuum cup for mounting your lights or camera, then the new 4-1/2" cup is recommended to fit into those tight places when either the 10" or 6" vacuum cup is too large. Also known as Pump Cup or Suction Cup.

Matthews Grip Helper Junior - Black

Grip Helper Junior - Black - B429753 The Grip Helper is a combination of several adapters in one. The Junior Pin of the Grip Helper mounts into a light stand, and the Junior Receiver allows the mounting of a light fixture without upsetting the center of balance. In between there is a 3' to 6' telescoping Extension Arm fixed at a 45 degree angle with a 4-1/2' Grip Head attached. By using the Grip Helper, a large light fixture and Diffusion Frame up to 48'x48' can be used from the same stand.

Matthews Hollywood Extendable Junior Offset Arm

Hollywood Extendable Junior Offset Arm - 430127 Offset Arms are a convenient tool when a lighting fixture needs to be placed off-center for the purpose of hiding the stand behind a set wall or coming over the top of the set. The Baby Extendable Offset Arm terminates in double 5/8" pins and the Junior Extendable Offset Arm terminates in a single 1-1/8" Junior Posi-V-Lock Receiver. Both extend from 18" to 25".

Matthews Hollywood Extendable Baby Offset Arm

Hollywood Extendable Baby Offset Arm - 430126 Offset Arms are a convenient tool when a lighting fixture needs to be placed off-center for the purpose of hiding the stand behind a set wall or coming over the top of the set. The Baby Extendable Offset Arm terminates in double 5/8" pins and the Junior Extendable Offset Arm terminates in a single 1-1/8" Junior Posi-V-Lock Receiver. Both extend from 18" to 25".

Matthews Heavy Duty Baby Side Arm Monitor Mount

Heavy Duty Baby Side Arm Monitor Mount - 429752 Side Arms can be clamped anywhere on the stand riser, allowing a light to be lowered to just above the legs and slightly offset, without the need for another stand. The Heavy Duty Side Arms utilize a special vice clamp and are made with heavier materials. In both cases, the Baby terminates in double 16mm pins and the Junior in a single 28mm Posi-V-Lock receiver. CAUTION: When using a Side Arm, place a sandbag on the far leg with the same amount of weight as the light fixture. This will help prevent tipping of the stand.

Matthews 40" Gobo Arm With Magic Finger

Matthews 40" Gobo Arm With Magic Finger Incorporates a 40" Gobo Arm with the Magic Finger. The Magic Finger has a 5/8" pin attached to a ball joint which pivots from -15° to +90° while the collar rotates 360°. All axis lock positively with just one handle.

Matthews 45 Degree Drop Down

Matthews 45 Degree Drop Down(429688) Drop Downs are most commonly used on Lighting Booms. The pivoting mounting allows the use of a light box or other lighting instruments to maintain a horizontal position regardless of the angle of the boom. The 45-degree Angle Drop Down is primarily used with reflectors to allow their use at lower angles than most stands permit.

Matthews Speed Menace Kit F/ 1-1/2" Pipe

Speed Menace Kit F/ 1-1/2" Pipe - B377710 The Matthews Schedule 40 Aluminum Pipe Menace Arm kit provides the ability to boom a lighting fixture into position while keeping the light stand out of camera view.  The system can also be configured to hold cameras and gimbals with optional adapters. The kit is available in black and works with standard 1¼” speed rail (inside diameter). The rear counter weight mount includes top and bottom D-rings for ratchet strap connection to the bottom of the stand in lieu of the counter weight bar.

Matthews Menace Arm Kit 1-1/4" Pipe

Menace Arm Kit 1-1/4" Pipe - B377709 B-377709 B 377709 B/377709 The Matthews Schedule 40 Aluminum Pipe Menace Arm kit provides the ability to boom a lighting fixture into position while keeping the light stand out of camera view.  The system can also be configured to hold cameras and gimbals with optional adapters. The kit is available in black and works with standard 1¼” speed rail (inside diameter). The rear counter weight mount includes top and bottom D-rings for ratchet strap connection to the bottom of the stand in lieu of the counter weight bar.

Matthews Max 6' Extension Arm

Max 6' Extension Arm - B377700-6 B377700 6 B3777006 B377700/6 Extend the reach of your MAX boom arm to 23' with the 6' Extension Arm with Locking Swivel Pin from Matthews. It attaches to the end of the MAX arm in place of the angled pipe section/self-leveling head, and features a locking swivel 5/8" Baby Pin.

Matthews Max 720 Pipe Adapter

Max 720 Pipe Adapter B377700-7 B3777007 B377700 7 B377700/7 The MAX 720 Pipe Adapter is designed to be used with standard 1-1/4 schedule 40 pipe. It accepts any length pipe and rotates 360 degrees in two opposite planes. Functions are unlimited and can be used for stretching MAX in reach, as well as horizontally for multiple fixtures and/or a key and fill light off the same rig. The 720 Pipe Adapter enables MAX to turn corners and can be used with the MAX Dropdown, enabling the user to configure an unlimited degree of compound angles. Caution must be taken to insure safe rigging; rigging should only be performed by a qualified Grip. Proper use of weight distribution to evenly balance the pipe setup is of extreme importance and special attention must be paid to the counterbalance requirements and payload maximum recommended load.

Matthews Big F’ing Mombo Combo Wheel(SET OF 3)

Matthews Big F’ing Mombo Combo Wheel(SET OF 3)(366076) Expanding the Matthews wheel accessory category, Big F’ing™ Wheelss were designed by request (and with input) from DITs, Steadicam ops, Video Assistants, Grips, and Gaffers. Unlike other caster wheels, the Big F’ing™ Wheel is a foam care-free semi pneumatic tire that won’t go flat, keeping your movements smooth and easy. Slip them onto the Matthews Mombo Combo and secure using our spring steel retainer, ensuring a tight fit without damaging the leg sidewall. All wheel treads wear down over time, which is why we created an adjustable brake pad that lengthens the life of the wheel, never sacrificing safety and utility. The Big F’ing™ Wheels brake dual locks the direction and rotation more reliably than other wheels. The mechanism is placed on the top, designed to prevent dirt allocation from regular use thus maintaining easy locking or loosening with a quick kick or push. The rounded design won’t jab into your foot or stub your toe! The Big F’ing™ Wheels Mombo Wheel Set couples with the MSE Mombo Combo (377591), saving you time (and back ache) by rolling larger lights and frames, instead of picking up or breaking down the setup. Let the wheels do the work.

Matthews Big F’ing Monitor Wheel Set (Set of 3)

Matthews Big F’ing Monitor Wheel Set (Set of 3)(366075) Expanding the Matthews wheel accessory category, Big F’ing™ Wheels were designed by request (and with input) from DITs, Steadicam ops, Video Assistants, Grips, and Gaffers.  Unlike other caster wheels, the Big F’ing™ Wheel is a foam care-free semi pneumatic tire that won’t go flat, keeping your movements smooth and easy. Slip them our Monitor Stand II or Slider Stand and secure using our spring steel retainer, ensuring a tight fit without damaging the leg sidewall.  All wheel treads wear down over time, which is why we created an adjustable brake pad that lengthens the life of the wheel, never sacrificing safety and utility. The Big F’ing™ Wheels brake dual locks the direction and rotation more reliably than other wheels.  The mechanism is placed on the top, designed to prevent dirt allocation from regular use thus maintaining easy locking or loosening with a quick kick or push.  The Big F’ing™ Wheels Monitor Set is designed to specifically work with the angle of the Matthews Monitor Stand II (249562) and Slider Stand (249561), soothing the minds and hearts of DITs, Video Assists, and Steadicam Ops that need to roll their gear over a stage nested with cables.

Matthews Big F’ing Combo Wheel (Set Of 3)

Matthews Big F’ing Combo Wheel (Set Of 3)(366074) Expanding the Matthews wheel accessory category, Big F’ing™ Wheels were designed by request (and with input) from DITs, Steadicam ops, Video Assistants, Grips, and Gaffers.  Unlike other caster wheels, the Big F’ing™ Wheel is a foam care-free semi pneumatic tire that won’t go flat, keeping your movements smooth and easy. Slip them onto a 1” square tube leg (like our Combo Stands) and secure using our spring steel retainer, ensuring a tight fit without damaging the leg sidewall.  All wheel treads wear down over time, which is why we created an adjustable brake pad that lengthens the life of the wheel, never sacrificing safety and utility. The Big F’ing™ Wheels brake dual locks the direction and rotation more reliably than other wheels.  The mechanism is placed on the top, designed to prevent dirt allocation from regular use thus maintaining easy locking or loosening with a quick kick or push. The Big F’ing™ Combo Wheel Set couples with the MSE Combo series, saving you time (and back ache) by rolling larger lights and frames, instead of picking up or breaking down the setup.  Let the rollers do the work.

Matthews Trio C+ Traveler Kit

Matthews Trio C+ Traveler Kit(249580) Matthews Studio Equipment is rolling out several unique tools to address the changing face of support in the first part of 2019. First up is the Trio C + Traveler Kit, a new way to address the needs of crews who are constantly on the road. Enter the Trio C + Traveler Kit: taking the Matthews Rolling KitBag and filling it with three of the 40” C+Stand Kits (removable turtle base C-Stands, Gobo Arms, and Heads). The C-Stand Rolling KitBag is fully customisable with padded Velcro dividers strong enough to hold an array of C-Stands and accessories. With high density silicon skate wheels, it’s easy to roll to and from set.

Matthews Magic Stand - Runway Base

Matthews Magic Stand - Runway Base(388201) This stand is truly magical! With the Runway Base added, the Magic Stand can be a regular rolling light stand. It can be a high rolling light stand, and it can also convert to a two section light boom with its own rolling stand. Its versatility is truly magical, whether a light needs to be placed at floor height, or behind as a hair light, or over a table for a product shot - this stand can do it all! Made with a standard 1-1/8" Junior Pin at the bottom, the Magic Stand riser could be added to the Combo Stand as a very unique stand extension or inverted to hang from a C-Clamp into the set. The top riser incorporates our Magic Finger - a stand that has been copied, but not yet duplicated!

Matthews Magic Stand /W Runway Base

Matthews Magic Stand /W Runway Base(999042) This stand is truly magical! With the Runway Base added, the Magic Stand can be a regular rolling light stand. It can be a high rolling light stand, and it can also convert to a two section light boom with its own rolling stand. Its versatility is truly magical, whether a light needs to be placed at floor height, or behind as a hair light, or over a table for a product shot - this stand can do it all! Made with a standard 1-1/8" Junior Pin at the bottom, the Magic Stand riser could be added to the Combo Stand as a very unique stand extension or inverted to hang from a C-Clamp into the set. The top riser incorporates our Magic Finger - a stand that has been copied, but not yet duplicated!

Matthews Crank-O-Vator III

Matthews Crank-O-Vator III(521004) 30 Years in Development... During the past thirty plus years Matthews Studio Equipment has supplied the production community with heavy-duty VATOR cranking stands. From Low Boy VATORS to the SUPER Crank-O-Vators, productions around the world have learned to trust Matthews VATORS for reliable, robust and strong large fixture support. Matthews now introduces the next generation of VATOR stands: VATOR III. The VATOR III family of dependable, safe, cranking stands continues the respected operating and performance characteristics of the past VATORS, while adding new models and features. As always, safey and low maintenance are both key factors in the design, engineering and manufacture on the VATOR III stands. VATOR III stands are manufactured using the latest CAD-CAM techniques, precision laser cutting/machining and CNC machining to ensure accuracy and dependability. The 'core' of the VATOR III stands is the precision rack and pinion gear drive mechanism that reduces components within the drive train to only two moving parts. This ensure years of reliable operation with minimal maintenance. Matthews has such great confidence in the new VATOR III stands that each stand is covered by a three year warranty under normal operating conditions. Excludes wheels and tires. From the Low Boy single riser through the Super Vator III, this new family of Matthews heavy-duty lighting stands will certainly set new standards in reliable large fixture lighting support.  

Matthews Super Vator III

Matthews Super Vator III(521003) 30 Years in Development... During the past thirty plus years Matthews Studio Equipment has supplied the production community with heavy-duty VATOR cranking stands. From Low Boy VATORS to the SUPER Crank-O-Vators, productions around the world have learned to trust Matthews VATORS for reliable, robust and strong large fixture support. Matthews now introduces the next generation of VATOR stands: VATOR III. The VATOR III family of dependable, safe, cranking stands continues the respected operating and performance characteristics of the past VATORS, while adding new models and features. As always, safey and low maintenance are both key factors in the design, engineering and manufacture on the VATOR III stands. VATOR III stands are manufactured using the latest CAD-CAM techniques, precision laser cutting/machining and CNC machining to ensure accuracy and dependability. The 'core' of the VATOR III stands is the precision rack and pinion gear drive mechanism that reduces components within the drive train to only two moving parts. This ensure years of reliable operation with minimal maintenance. Matthews has such great confidence in the new VATOR III stands that each stand is covered by a three year warranty under normal operating conditions. Excludes wheels and tires. From the Low Boy single riser through the Super VATOR III, this new family of Matthews heavy-duty lighting stands will certainly set new standards in reliable large fixture lighting support.

Matthews Midi Vator III

Matthews Midi Vator III(521002) 30 Years in Development... During the past thirty plus years Matthews Studio Equipment has supplied the production community with heavy-duty VATOR cranking stands. From Low Boy VATORS to the SUPER Crank-O-Vators, productions around the world have learned to trust Matthews VATORS for reliable, robust and strong large fixture support. Matthews now introduces the next generation of VATOR stands: VATOR III. The VATOR III family of dependable, safe, cranking stands continues the respected operating and performance characteristics of the past VATORS, while adding new models and features. As always, safey and low maintenance are both key factors in the design, engineering and manufacture on the VATOR III stands. VATOR III stands are manufactured using the latest CAD-CAM techniques, precision laser cutting/machining and CNC machining to ensure accuracy and dependability. The 'core' of the VATOR III stands is the precision rack and pinion gear drive mechanism that reduces components within the drive train to only two moving parts. This ensure years of reliable operation with minimal maintenance. Matthews has such great confidence in the new VATOR III stands that each stand is covered by a three year warranty under normal operating conditions. Excludes wheels and tires. From the Low Boy single riser through the Super Vator III, this new family of Matthews heavy-duty lighting stands will certainly set new standards in reliable large fixture lighting support.

Matthews Low Boy Double Riser Vator III

Matthews Low Boy Double Riser Vator III(521001) 30 Years in Development... During the past thirty plus years Matthews Studio Equipment has supplied the production community with heavy-duty VATOR cranking stands. From Low Boy VATORS to the SUPER Crank-O-Vators, productions around the world have learned to trust Matthews VATORS for reliable, robust and strong large fixture support. Matthews now introduces the next generation of VATOR stands: VATOR III. The VATOR III family of dependable, safe, cranking stands continues the respected operating and performance characteristics of the past VATORS, while adding new models and features. As always, safey and low maintenance are both key factors in the design, engineering and manufacture on the VATOR III stands. VATOR III stands are manufactured using the latest CAD-CAM techniques, precision laser cutting/machining and CNC machining to ensure accuracy and dependability. The 'core' of the VATOR III stands is the precision rack and pinion gear drive mechanism that reduces components within the drive train to only two moving parts. This ensure years of reliable operation with minimal maintenance. Matthews has such great confidence in the new VATOR III stands that each stand is covered by a three year warranty under normal operating conditions. Excludes wheels and tires. From the Low Boy single riser through the Super Vator III, this new family of Matthews heavy-duty lighting stands will certainly set new standards in reliable large fixture lighting support. The Low Boy Vator is also known as Loboy or LoBoy.

Matthews Slider Stand Wheels Set of 3

Matthews Slider Stand Wheels Set of 3(249563) This 3 Wheel Set for Slider Stand by Matthews uses TENTE casters with metal hubs and ball and roller bearings. The wheels feature braking in all directions (rotational and linear) with spring-steel brakes that are designed not to scratch the Slider Stand's legs. Both the stand and non-marking wheels support up to 80 lb loads. The wheels are also compatible with the Dana Dolly System and Rig Wheels.

Matthews Mini Slider Stand

Matthews Mini Slider Stand(249564) Mini slider stand features steel tubes, steel legs, military black chrome; and a machined, welded junior receiver. Capacity up to 80lbs (36kg).

Matthews Monitor Stand II

Matthews Monitor Stand II(249562) Featuring a black chrome finish, the Monitor Stand II from Matthews has a minimum working height of 29" and rises to a maximum height of 75". The stand will support gear weighing up to 70 lb and is easily moved thanks to its 3" casters. The Monitor Stand II also has an adjustable rocky mountain leg to level the stand on uneven terrain.

Matthews BH-30 Ball Head

BH-30 Ball Head Unlike most other ball head mounts which are manufactured from die cast components, Matthews Ball Head Camera Mounts are individually CNC machined from solid bar stock to ensure precise control over all critical dimensions and elements. A precision machined camera quick release plate with a balancing feature offers quick, safe and positive-locking of the camera to the Ball Head Mount. The mounting plate can stay permanently attached to the camera, thus avoiding the hassle of trying to screw the camera onto the ball or screwing the ball onto the camera. All heads mount either to the vacuum cup (also known as Pump Cup or Suction Cup) or other devices with 3/8"-16 mounting threads for extra strength and security.

Matthews Mombo Combo Hollywood Wheels

Matthews Mombo Combo Hollywood Wheels(377584) The Mombo Combo Stand achieves an incredible height of 22.3 feet. Because of this height, it features an extra-wide base and incorporates a collar for attaching stabilizing Guy Wires or ropes (Matthews #377578-40). The Mombo Combo legs are made of 1-1/4" square steel tubing and are internally reinforced with a Matthews engineered gusset assembly. The Mombo Combo's Rocky Mountain Leg will offset uneven terrain to ensure a firm, stable and sturdy footprint. This is absolutely the strongest stand of its type in the business! CAUTION: Slight wind can create a tremendous hazard at the heights attainable with this tand. The use of stabilizing cables or guy ropes is recommended.

Matthews Mini Mombo Overhead / Light Stand

Matthews Mini Mombo Overhead / Light Stand(377585) If you do not need all the potential height of the Mombo Combo Stand but would rather like a lightweight stand with almost as much reach as the Mombo Combo please consider the new Mini Mombo from Matthews. Matthews has engineered the Mini Mombo to achieve the much desired 'lower working height' required when mounting either large flags and butterflies or heavy lighting fixtures. The Mini Mombo 4-riser Stand has a maximum height of over 17 feet and will easily handle fixtures over 80 pounds. Great for overheads and frames. Like all Matthews stands, the Mini Mombo packs a lot of punch! It's strong, robust, and the Mini Mombo's Rocky Mountain Leg will offset uneven terrain to ensure a firm, stable and sturdy footprint.

Matthews Hi-hi Overhead Stand – Wide Base With Rocky Mountain Leg

Matthews Hi-hi Overhead Stand – Wide Base With Rocky Mountain Leg(377575) Roller Stands, or Overhead Stands as they are often called, utilize all steel tubes and legs. Developed for flying Butterflies and Overheads on location and supporting large backdrops in studios, these stands feature wide bases for stability and terminate in the new 4.5" Grip Head. Plates now feature two holes of 3/8" and 5/8" diameter that eliminate any confusion. New casting offers positive lock in all directions. The strongest and most popular 4-1/2" Grip Head in the industry. Guaranteed to hold. Matthews casters are locking and non-marking. Made from steel components - not plastic - and will provide years of durable service.

Matthews Hi-hi Overhead Roller Stand With Rocky Mountain Leg

Hi-hi Overhead Roller Stand With Rocky Mountain Leg H377577 Roller Stands, or Overhead Stands as they are often called, utilize all steel tubes and legs. Developed for flying Butterflies and Overheads on location and supporting large backdrops in studios, these stands feature wide bases for stability and terminate in the new 4.5" Grip Head. Plates now feature two holes of 3/8" and 5/8" diameter that eliminate any confusion. New casting offers positive lock in all directions. The strongest and most popular 4-1/2" Grip Head in the industry. Guaranteed to hold. Matthews casters are locking and non-marking. Made from steel components - not plastic - and will provide years of durable service.

Matthews HI-HI Overhead Roller Stand

HI-HI Overhead Roller Stand HI-HI Overhead Roller Stand Roller Stands, or Overhead Stands as they are often called, utilize all steel tubes and legs. Developed for flying Butterflies and Overheads on location and supporting large backdrops in studios, these stands feature wide bases for stability and terminate in the new 4.5" Grip Head. Plates now feature two holes of 3/8" and 5/8" diameter that eliminate any confusion. New casting offers positive lock in all directions. The strongest and most popular 4-1/2" Grip Head in the industry. Guaranteed to hold. Matthews casters are locking and non-marking. Made from steel components - not plastic - and will provide years of durable service.

Matthews Junior Stand Triple Riser Rolling

Junior Stand Triple Riser Rolling H386033 Designed for larger lighting fixtures, these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal Posi-V-Lock Junionr Receiver with po up 5/8" male pin, the Senior Stands are made for fixtures weighing up to 88pounds. Please refer to the technical specification for the weight limitations of each stand. Matthews casters are locking and non-marking. Made from steel components - not plastic - and will provide years of durable service.

Matthews Senior Stand Double Riser Rolling

Senior Stand Double Riser Rolling H386027 Designed for larger lighting fixtures, these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal Posi-V-Lock Junior Receiver with pop up 5/8" male pin, the Senior Stands are made for fixtures weighing up to 88lbs. Please refer to the technical specification for the weight limitations of each stand. Matthews casters are locking and non-marking. Made from steel components - not plastic - and will provide years of durable service.

Matthews Junior Double Riser Column Only

Matthews Junior Double Riser Column Only(429051) Designed for larger lighting fixtures, these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal Posi-V-Lock Junionr Receiver with po up 5/8" male pin, the Senior Stands are made for fixtures weighing up to 88pounds. Please refer to the technical specification for the weight limitations of each stand. Matthews casters are locking and non-marking. Made from steel components - not plastic - and will provide years of durable service.

Matthews Budget Wheels - Set of 3

Matthews Budget Wheels - Set of 3(366170) Made to smoothly move light stands with fixtures mounted on them, this set of three Budget Wheels from Matthews contains 3" diameter wheels with brakes that will fit all Matthews stands with 1" square legs.  

Matthews 20" Double Riser Spring Loaded Folding C-stand W/grip Head & Arm

Matthews 20" Double Riser Spring Loaded Folding C-stand W/grip Head & Arm(B339774) Matthews (339774) 20inch Chrome Double Riser Spring Loaded Folding C-Stand - with Grip Head & Arm. Matthew's 20inch double riser c-stand with a max height of 161cm and a minimum height of 76cm in chrome, the spring loaded c-stand has a maximum capacity of 10kg with a footprint of 70cm comes with a grip head and arm.

Matthews 20" C-Stand - "Punky" W/Spring Loaded Base - Chrome

Matthews 20" C-Stand - "Punky" W/Spring Loaded Base - Chrome(339573) In 1974 Matthews Studio Equipment introduced the industry’s first folding base C-Stand. (C-Stand and Century Stand are registered trademarks of Matthews Studio Equipment, Inc.) Matthews now produces a wide range of C-Stands and related accessories to assist the motion picture, television and photographic professional in lighting and lighting modification support. The term ‘Century Stand’ goes back to the early days of motion picture production. Before there was artificial lighting the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce or kick the overhead light up onto the stage and illuminate the set and actors. These reflectors were made in many sizes but it seems the most popular was the 100 inch, or ‘century’, sized reflector. In later years, studios, grips and gaffers began to manufacture the earliest versions of what we now call C-Stands. The original C-Stands had welded bases that did not fold up or adjust but the fact that they easily nested together made them invaluable on the stage. Century Stands or ‘C’ stands are an important component in the image maker’s arsenal of tools. These popular stands are available in many different configurations, lengths and finishes. The unique staggered leg design allows C-Stands to be nested and therefore be placed extremely close to one another on set. The lower leg can also be slid under many objects. The C+ offers a removable base for the risers, making disassembly for travel simple and easy without being cumbersome or having the awkwardness typical of other manufacturers. The sliding leg allows for use on stairs, off curbs and even as high as a desk or countertop. Patents applied for and pending. Fast, easy opening and closing.  

Matthews Baby Jr. Triple Riser (Black)

MD-BH386020 MDBH386020 MD BH386020 MD/BH386020 Baby Jr. Triple Riser (Black) These very popular lighting stands for Baby fixtures, which require a 5/8" mounting pin, are made with steel legs and riser assembly. The tripod braced base with 'all-axis' non-marking locking casters provides great stability. Matthews casters are not cheap, but when you are buying wheels you get what you pay for. Matthews casters are non-marking and lock in the caster position as well as rotationally. Made from steel components - not plastic - and will provide years of durable service.