Portabrace WPC-SET WPC-1ORB & WPC-2ORB Wheeled Production Case Set (Black)

Portabrace WPC-SET (WPC_SET, WPC/SET, WPC SET) (WPC/1ORB) (WPC 2ORB) WPC-1ORB & WPC-2ORB Wheeled Production Case Set (Black)  Portabrace wheeled production cases are rugged rolling transport cases designed to protect and carry a wide range of lighting, grip and production gear, electronics, accessories, batteries, cable, and more. The cases have a lightweight yet rigid and highly-protective frame. The frame has a layer of padding and is covered in water-resistant, military-grade 1000d Cordura® fabric and water-proofed nylon-bonded triple-tacked stitching for long life and superior water-resistance in a range of unpredictable production conditions. Easily cleaned as necessary. The Wheeled Production Case's padded-rigid walls are reinforced with extra layer of lightweight rigid protection for carrying extra heavy loads. The case interior can be organized into a custom divider setup using the included padded rigid dividers. There are oversized exterior pockets for extra storage. Removable Off-Road Wheel System Each "WPC" features our removable wheel system that provides maximum stability and a smooth rolling experience while also allowing you to remove the wheels to prevent axle damage during air or van transport. The smooth rolling high-performance off-road removable wheels are made of solid rubber and have off-road treads for superior rolling on almost any surface. The wheels have smooth-rolling ball bearings and solid-steel axles to allow you to pull heavy loads comfortably and confidently.

Portabrace WPC-3ORB Wheeled Production Case (Large, Black)

Portabrace WPC-3ORB (WPC_3ORB, WPC/3ORB, WPC 3ORB) Wheeled Production Case (Large, Black) The WPC-3ORB (Large Wheeled Production Case) is a rugged rolling transport case designed to protect and carry a wide range of lighting, grip and production gear, electronics, accessories, batteries, cable, and more. The case has a lightweight yet rigid and highly-protective frame. The frame has a layer of padding and is covered in water-resistant, military-grade 1000d Cordura® fabric and water-proofed nylon-bonded triple-tacked stitching for long life and superior water-resistance in a range of unpredictable production conditions. Easily cleaned as necessary. The case's padded-rigid walls are reinforced with extra layer of lightweight rigid protection for carrying extra heavy loads. The case interior can be organized into a custom divider setup using the included padded rigid dividers. There are oversized exterior pockets for extra storage. Removable Off-Road Wheel System The WPC-3ORB features our removable wheel system that provides maximum stability and a smooth rolling experience while also allowing you to remove the wheels to prevent axle damage during air or van transport. The smooth rolling high-performance off-road removable wheels are made of solid rubber and have off-road treads for superior rolling on almost any surface. The wheels have smooth-rolling ball bearings and solid-steel axles to allow you to pull heavy loads comfortably and confidently.

Portabrace WPC-3OR Wheeled Production Case (Large, Blue)

Portabrace WPC-3OR (WPC_3OR, WPC/3OR, WPC 3OR) Wheeled Production Case (Large, Blue) The WPC-3OR (Large Wheeled Production Case) is a rugged rolling transport case designed to protect and carry a wide range of lighting, grip and production gear, electronics, accessories, batteries, cable, and more. The case has a lightweight yet rigid and highly-protective frame. The frame has a layer of padding and is covered in water-resistant, military-grade 1000d Cordura® fabric and water-proofed nylon-bonded triple-tacked stitching for long life and superior water-resistance in a range of unpredictable production conditions. Easily cleaned as necessary. The case's padded-rigid walls are reinforced with extra layer of lightweight rigid protection for carrying extra heavy loads. The case interior can be organized into a custom divider setup using the included padded rigid dividers. There are oversized exterior pockets for extra storage. Removable Off-Road Wheel System The WPC-3OR features our removable wheel system that provides maximum stability and a smooth rolling experience while also allowing you to remove the wheels to prevent axle damage during air or van transport. The smooth rolling high-performance off-road removable wheels are made of solid rubber and have off-road treads for superior rolling on almost any surface. The wheels have smooth-rolling ball bearings and solid-steel axles to allow you to pull heavy loads comfortably and confidently. There is a retractable handle for pulling the case and comfortable suede leather handles for picking the case up during transport.

Portabrace WBU-1ORB Wheeled Bucket Case (Black)

Portabrace WBU-1ORB (WBU_1ORB, WBU/1ORB, WBU 1ORB) Wheeled Bucket Case (Black) The Wheeled Bucket Case is perfect for transporting and shipping the Mac Pro Tower or field video equipmnent.  The padded, rigid, hollow-core frame provides maximum protection in a lightweight format.  The case exterior is made using durable, 1000-denier Cordura® fabric with a waterproof, anti-skid lining on the bottom.   Roll the Wheeled Bucket Case smoothly over almost any surface with its off-road inline skate wheels and strong steel axle.   There's a large front pocket to store cables and an a small vinyl window for displaying a press pass or other identification. Available in Signature Blue or Midnight Black.

Portabrace WCS-3ORB Large Wheeled Case for Carrying C-Stand and Accessories

Portabrace WCS-3ORB (WCS_3ORB, WCS/3ORB, WCS 3ORB) Large Wheeled Case for Carrying C-Stand and Accessories The Porta-Brace WCS-3ORB Wheeled C-Stand Case is designed for transporting multiple sets of c-stands (up to 37" long) or other heavy loads of studio, audio, video and film equipment. The case is constructed of a strong semi-rigid interior frame covered with 1,000 denier abrasion-resistant Cordura nylon fabric. There is thick padding around the case that provides extra protection for case contents. It has off-road inline skate wheels with ball bearings and solid steel axles for smooth rolling over almost any surface. It has 2 overlapping carrying handles. A set of fold down dividers is provided which allows customizing of storage compartments.  The WCS-3ORB now comes with a SAN-2B and a CS-B9 padded pouch. Abrasion-resistant, 1000-denier Cordura nylon Interior dividers included for customizing interior 2 large side accessory pockets for cables Comfortable suede carrying handles Removable off-road inline skate wheels  

Portabrace WPC-1ORAUD Wheeled Production Case (Blue)

Portabrace WPC-1ORAUD (WPC_1ORAUD, WPC/1ORAUD, WPC 1ORAUD) Wheeled Production Case (Blue) The WPC-1ORAUD Wheeled Production Case is made for transporting all kinds of  audio equipment. The cases are designed to be used for handling gear on location as well as transporting apparatus to the job site. They are constructed of a strong ridged interior frame covered with 1000 denier Cordura nylon fabric, with padded protection all around. The WPC-1ORAUD has off-road inline skate wheels with strong steel axles for improved stability and traction. A retractable telescoping steel handle is mounted on top for portability.Case Basics Lightweight production case for heavy loads for studio, audio, video and film equipment Divider kit is provided which allows customizing of an infinite number of storage compartments. Material 1000 denier water-resistant Cordura nylon Strong ridged interior frame Fully padded all around the interior Pockets Two exterior front pockets Two large side pockets Top pocket Rear slip pocket Carrying Options Retractable telescoping steel handle Off road rubber wheels with long axles on the wheels for good tracking  

Portabrace SZW-3B Size Wize Production Travel Case (Black)

Portabrace SZW-3B (SZW_3B, SZW/3B, SZW 3B) Size Wize Production Travel Case (Black) The Size Wize Camera Case was developed with air travel in mind to carry all kinds of equipment and accessories. The overall allowable size for hand luggage is currently 45" (L+W+H) on most airlines, and this bag is exactly that. The case carries the greatest amount of equipment with you within airline maximum size limitations. The unique, rigid-wall construction optimizes interior space and provides maximum protection for your equipment. In addition, your Size Wize Production Case features a snag free travel cover, a heavy duty shoulder strap, and our new movable partition system.

Portabrace RIG-6SR Camera Bag (Black)

Portabrace RIG-6SR (RIG_6SR, RIG/6SR, RIG 6SR) Camera Bag (Black) The black RIG-6SR Camera Bag from Porta Brace is a get-up-and-go bag for the videographer who needs a lightweight and very durable case that is basically designed to be "stow and go". Made from tough 1000-denier Cordura nylon and complemented by interior foam padding, this is a rough and ready bag that holds your large HDSLR or cine-style camera, fully assembled, in shooting position. Simply unzip the single middle zipper that runs down the center of the bag, grab your camera and shoot. When finished, replace the rig, zip up the bag and move on.  The bag is part of Porta Brace's RIG series where the basic shell is empty but can be customized with any number of optional accessories purchased from Porta Brace's Online Case Builder. Items such as straps, lens cups, camera stabilizers, padded pouches, camera pillows and iPad pouches can be bought to tailor the case to suit your needs. Switch them in and out to accommodate your daily requirements. A long exterior front zippered pocket holds more accessories such as cables and adapters or other quick access items, The case is carried by two strong suede leather handles or its side pull handle. A handy front D-Ring is included for attaching keys, ID holder or small pouch. Soft, run-style bag with single zipper that runs down the middle to provide quick and easy access to your rig This bag can be customized to suit your shooting and gear needs by purchasing any number of optional accessories from Porta Brace's Online Case Builder; optional RIG-KIT1, standard interior kit is available for this bag Holds rig in shooting position Zipper opens along full length of bag to expose the contents Long front zippered accessory pocket Dual suede leather handles; side pull handle Front D-Ring for keys 1000-denier Cordura nylon; Veltex and foam padding  

Portabrace RB-3B Lightweight Run Bag, Large for A/v Production Accessories (Black)

Portabrace RB-3B (RB_3B, RB/3B, RB 3B) Lightweight Run Bag, Large for A/v Production Accessories (Black) The New RUN BAG has a new zipper facing to keep even more water out should you forget and leave the case out in the rain. The main compartment is foam padded with a padded rigid bottom. Two dividers span the 7" width with a 12" divider in between (with zippered slip pocket), providing a useful array of subdivisions. Fold them out of the way for one large compartment. A shoulder strap is included.

Portabrace RB-2B Lightweight Run Bag, Medium for Audio and Video Production Accessories (Black)

Portabrace RB-2B (RB_2B, RB/2B, RB 2B) Lightweight Run Bag, Medium for Audio and Video Production Accessories (Black) The New RUN BAG has a new zipper facing to keep even more water out should you forget and leave the case out in the rain. The main compartment is foam padded with a padded rigid bottom. Two dividers span the 7" width with a 12" divider in between (with zippered slip pocket), providing a useful array of subdivisions. Fold them out of the way for one large compartment. A shoulder strap is included.

Portabrace POL-XF105 Polar Mitten Camera Case for Canon XF105

Portabrace POL-XF105 (POL_XF105, POL/XF105, POL XF105) Polar Mitten Camera Case for Canon XF105 Polar Mitten Camera Cases are designed to keep your camera functioning properly in cold weather.  They are thickly padded with high-loft insulation material.  Air-activated warmers are placed along the case interior to keep battery, recorder, lens and hands warm in extreme cold temperatures (Tested at “50 degrees Fahrenheit). The insulated lens cap protects the lens in transport and also prevents condensation from forming when bringing the camera in from the cold. Each Polar Mitten Case comes with 4 air-activated heat packs.  Additional packs (PHP-2) can be ordered directly. 

Portabrace POL-PXWZ150 Polar Mitten Camera Case for Sony PXWZ150

Portabrace POL-PXWZ150 (POL_PXWZ150, POL/PXWZ150, POL PXWZ150) Polar Mitten Camera Case for Sony PXWZ150 Polar Mitten Camera Cases are designed to keep your camera functioning properly in cold weather.  They are thickly padded with high-loft insulation material.  Air-activated warmers are placed along the case interior to keep battery, recorder, lens and hands warm in extreme cold temperatures (Tested at –50 degrees Fahrenheit). The insulated lens cap protects the lens in transport and also prevents condensation from forming when bringing the camera in from the cold. Each Polar Mitten Case comes with 4 air-activated heat packs.  Additional packs (PHP-2) can be ordered directly. 

Portabrace POL-PX270 Polar Mitten Camera Case for Panasonic AJ-PX270

Portabrace POL-PX270 (POL_PX270, POL/PX270, POL PX270) Polar Mitten Camera Case for Panasonic AJ-PX270 Polar Mitten Camera Cases are designed to keep your camera functioning properly in cold weather.  They are thickly padded with high-loft insulation material.  Air-activated warmers are placed along the case interior to keep battery, recorder, lens and hands warm in extreme cold temperatures (Tested at 50 degrees Fahrenheit). The insulated lens cap protects the lens in transport and also prevents condensation from forming when bringing the camera in from the cold. Each Polar Mitten Case comes with 4 air-activated heat packs.  Additional packs (PHP-2) can be ordered directly. 

Portabrace MOH-702L Protective Visor Hood for SmallHD 702

Portabrace MOH-702L (MOH_702L, MOH/702L, MOH 702L) Protective Visor Hood for SmallHD 702 The MOH-702L Monitor Hood is a lightweight rain cover and field viewing visor for use with the Small HD 702 monitor. The case is constructed using Nylon Taslan® material that is both water-resistant and breathable. This allows the cover to protect the 702 monitor from rain while allowing heat generated from the monitor to escape. The 9-inch long visor dramatically reduces glare and improves screen visibility. The rim of the visor is lined with a padded, soft material to prevent skin irritation when viewing. There is an access flap to the accessory shoe for mounting the monitor and case to the top of your HDSLR.

Portabrace LR-4GLCCB Glidecam Carrying Case (Black)

Portabrace LR-4GLCCB (LR_4GLCCB, LR/4GLCCB, LR_4GLCCB) Glidecam Carrying Case (Black) The Glidecam Carrying Case from Porta Brace is a rigid framed, heavy-duty case that is designed for worry-free transport of your Glidecam stabilizer system. This case has 2 heavily padded dividers as well as a BK-ZC stuff sack. The Veltex­-lined interior keeps your Glidecam safe while running to shoots across town or even when you throw the case in the trunk of your car.

Portabrace LPB-LED2 Carrying Case for Multiple Lite Panels 1X1 (Midnight Black)

Portabrace LPB-LED2 (LPB_LED2, LPB/LED2, LPB LED2) Carrying Case for Multiple Lite Panels 1X1 (Midnight Black) The LP-LED2 Carrying Case for Multiple Lite Panels 1X1 (Midnight Black) is made of water resistant 1000 denier Cordura nylon with closed-cell foam padded interior and thick U-shaped foam at the bottom. There is a removable interior divider. The top-loading zipper design gives quick access to the panels. The case has an external pocket for cables and batteries, a soft, padded pouch for carrying gels and 2 side exterior light stand pockets. It is carried by 2 handles with suede leather covered overlapping grips or an included shoulder strap with suede leather covered pad. Case Basics Fits Multiple Lite Panels 1X1 squares Removable interior divider Material Water resistant 1000 denier Cordura nylon Closed-cell foam padded interior Thick U-shaped foam at the bottom Pockets External touch fastener pocket for cables and batteries Soft, padded pouch for carrying gels Two exterior side light stand pockets Large rear slip pocket Vinyl ID Window Large interior mesh pocket Carrying options Carry handles with suede leather covered overlapping grips Shoulder strap with suede leather covered pad Compatible with multiple Lite Panels 1X1  

Portabrace DCO-3U Rigid-Frame Protection for Carrying HDSLR Camera and Lenses (L)

Portabrace DCO-3U (DCO_3U, DCO/3U, DCO 3U) Rigid-Frame Protection for Carrying HDSLR Camera and Lenses (L) The DCO-3U has a special design that widens towards the front of the case in order to fit a camera assembled with a matte box and follow focus. The DCO-3U Camera Case has a padded, hollow-core rigid frame that provides maximum protection for your equipment while remaining lightweight. The case exterior is constructed using durable Cordura material (1000-denier).  There are soft suede-leather carrying handles and a comfortable heavy-duty suede shoulder strap. The DCO-3U comes with a heavy-duty, suede leather shoulder strap, CS-B9 Pouch, PB-812 Pouch, PB-LCP-4 Lens Cup, 2 Positionable Stuffer Blocks, White Balance Card, and camera tie-down strap.

Portabrace DCO-2U Rigid-Frame Protection for Carrying HDSLR Camera and Lenses (M) (Signature Blue)

Portabrace DCO-2U (DCO_2U, DCO/2U, DCO 2U) Rigid-Frame Protection for Carrying HDSLR Camera and Lenses (M) (Signature Blue) The Digital Camera Organizer has a rigid-frame that provides an extra level of protection. The DC Organizer is the ideal case for field photography and video. The case has 7 pockets; one exterior large mesh pocket, 1 exterior large zipper pocket, 2 side pockets with 2 mesh pockets, interior pocket and the lid contains 2 zippered mesh pockets. This case comes with a Shoulder Strap, PB-B6 Pouch, PB-B9 Pouch, PB-LCP-4 Lens Cup (4-inch), PB-LCP-7 Lens Cup (7-inch), (2) 5x9 Bendable Dividers, Medium Sized Pillow Stuffer, Stuffer Block, Camera Cradle and Cinch Strap.

Portabrace CTC-MINI Traveler Camera Case (Signature Blue)

Portabrace CTC-MINI (CTC_MINI, CTC/MINI, CTC MINI) Traveler Camera Case (Signature Blue) The Traveler is constructed using abrasion-resistant ultra-durable Cordura® Nylon (1000-denier) for long-life reliability in harsh field conditions. Portabrace Cordura material is also woven with an extra layer of water-resistant treatment and is cold-crack tested at -40°F for 4 hours. The case also has one-inch thick foam padding, reinforced by hollow-core plastic on the bottom and sides that combine to provide maximum protection in a lightweight format.   A layer of non-slip, water-proof material has been added to the exterior bottom panel of the case to provide even greater protection against water and dirt when the case is placed on the ground. This waterproof layer can easily be wiped clean.  The Traveler Case is sewn using triple bonded nylon threads and our all thread-ends are flamed to extend the life of the case and strengthen seems. Back-tacking stitch methodology is used to create superior strength along seams and at the connection points of the carry handles and solid-steel strap rings. During transport, the padded side walls fit snugly against the camera. A padded foam support block (CC-STUFFER) is also included, which sticks to the bottom of the case using Velcro® to support the lens and provide an extra level of protection against bumps when you're on the move.  The case is designed with a single, extra durable YKK® zipper that opens the case up wide to make accessing the camera quick. There's a "zipper hood" made using Cordura® material that runs the length of the zipper in order to extend the life of the zipper and prevent water from rain or splashing to get inside the case. A padded genuine-suede shoulder strap is included for superior carry comfort and durability. There is a single 6-inch x 3-inch x 5 inch exterior pocket ideal for carrying additional small accessories. This pocket has a press-pass / ID window for conveniently displaying your credentials. An additional, longer exterior pocket (12-inch x 3-inch x 4-inch) is ideal for a shotgun mic or grip-control and arm.

Portabrace CTC-2 Traveler Camera Case (Signature Blue)

Portabrace CTC-2 (CTC_2, CTC/2, CTC 2) Traveler Camera Case (Signature Blue)  The Porta Brace CTC-2 Traveler Camera Case (Signature Blue) is a 1000 denier Cordura nylon carrying case designed to carry small camcorders such as; Canon XL-1, JVC GY-HD100, Panasonic AG-460 or Sony DSR-200 and accessories. It features padded protection for the camera and extra protection for delicate view finders. The case has 1.0" thick foam reinforced by plastic on the front and back sides. The bottom has a no-sag, hollow core base with foam padding and a foam block to help position the camera. A non-slip bottom layer wipes clean easily and provides extra water proof protection. The CTC-2 has exterior and interior pockets that provide room for batteries, tapes, tripod plate, and accessories. It is carried by a suede leather shoulder strap or a suede carrying handle. A white balance card is included. Construction 1000 denier Cordura nylon Rigid corrugated plastic sides 1.0" padded foam interior Full over the top twin, super-duty YKK zippers with a zipper facing that extends over the zipper to keep rain and debris from entering Pockets Front pockets for extra batteries and tapes, AC power supply or tripod plate. Rear zippered, mesh slip pockets Large interior mesh slip pocket Small interior mesh pocket for battery or cell phone ID window Armored viewfinder space and viewfinder guard for protection White balance card is included Carrying Options Suede leather covered shoulder strap Suede leather covered carrying handle Rings for carrying cable and alternate camera strap Seat belt loop to secure case to car seat belt Heavy-duty swivel clips.  

Portabrace CS-UX90 Custom-Fit Camera Case for Panasonic AG-UX90

Portabrace CS-UX90 (CS_UX90, CS/UX90, CS UX90) (AG_UX90, AG/UX90) Custom-Fit Camera Case for Panasonic AG-UX90 The CS-UX90 camera case is designed to protect and organize the Panasonic AG-UX90 and essential accessories. The case's unique opening has a single, durable YKK® zipper that runs the entire length of the case to provide an extra-wide opening for easily removing and replacing the camera and other case contents.  The case comes with a Camera Cradle designed to secure your camera in place inside the case, even during rough travel conditions. A White Balance Card with convenient wrist strap is also included. The CS-UX90 is made from durable abrasion-resistant 1000-denier Cordura nylon that has been treated with a protective urethane waterproof coating (DWR). The case body is constructed using ¾-inch foam and the bottom panel is reinforced with 8.0mm hollow core plastic and an extra layer of foam. The exterior bottom is lined with a layer of anti-skid Slip-Not material that provides an extra level of protection against water, dirt and grime. The main zipper is protected by a Cordura flap to help prevent damage and keep water from entering the case. ""Concealed Zippers"" are used, which ""reverse"" the zipper facings to prevent snagging and extend life of the zippers. High-quality, bonded thread is used and double-seamed in areas that typically support more weight or are susceptible to additional wear and tear. All thread-ends are burned to prevent loose threads or running on seams. Genuine suede is used to provide extra comfort and durability to the carrying handles and a comfortable nylon shoulder strap is included. The removable strap hassteel clasps that clip to the CS-UX90's strong, nickel-plated steel rings. There is a full-length exterior pocket that measures, which is ideal for cables, a shotgun mic, or an optional rain cover. There's also a long slip-pocket on the back of the case that is ideal for carrying the White Balance Card (included), owner's manuals, airline tickets, and other documents.

Portabrace PB-26LENS Padded Cordura Lens Case (Black)

Portabrace PB-26LENS (PB26LENS, PB/26LENS, PB 26LENS) Padded Cordura Lens Case (Black) The Porta Brace PB-26LENS Padded Cordura Lens Case comes with a padded divider system designed specifically for protecting and transporting camera lenses. The case has a lightweight, rigid frame that is surrounded with thick padding. The case exterior is made of durable, water-resistant 1000-denier Cordura, and the interior has a soft Veltex lining that cushions lenses and also attaches to the hook & loop fastener-based dividers at any point of contact. This allows you to fully customize your interior according to your current equipment needs. The Divider Kit comes with eight DK-C4 4.0” padded dividers and one 15.0” padded divider. The dividers are copper-colored for improved visibility of lenses inside the case.