SHAPE Push Button VESA Monitor Mount for C-Stand & Baby Pin

SHAPE Push Button VESA Monitor Mount for C-Stand & Baby Pin(SH-VSAPB, SHVSAPB, SH/VSAPB) The SHAPE VESA monitor support mounts to industry standard 5/8’’ baby pins or C-stands and supports monitors with a 100 x 100 or 75 x 75 VESA pattern. This sturdy mount features a Push-Button tilt angle adjustment and a friction locking knob to lock and secure the monitor at the desired angle. Made of CNC machined aluminium, the mount includes a ratchet knob to secure it on the 5/8’’ baby pin or C-stand and a safety pin to allow its removal from the C-stand.

SHAPE Cartoni tripod pan telescopic handle with push-button

SHAPE Cartoni tripod pan telescopic handle with push-button(SH-TRIPAN3, SHTRIPAN3, SH/TRIPAN3) The SHAPE tripod pan handle is perfect for all types of cameramen and allows you to comfortably position your Cartoni tripod on set in all types of situations such as in a limited space, a higher position or a tight closet. The telescopic handgrip with rosette can be attached to your Cartoni tripod. The arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arm position. The ratchet knob along the arm allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. For a shorter configuration, you can easily disassemble the push-button rubber handgrip from the telescopic arm and mount it to the rosette adapter. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

SHAPE Multi D-Tap V-Mount Plate 15mm LWS Rod Mount

SHAPE Multi D-Tap V-Mount Plate 15mm LWS Rod Mount(SH-MDTVM, SHMDTVM, SH/MDTVM) Power your camera and a variety of accessories from a single high-capacity V-mount battery with the Multi D-Tap V-Mount Battery Plate with 15mm LWS Rod Mount from SHAPE. The battery plate provides a V-mount for a single V-mount battery and four 14.4V, 10A regulated D-Tap outputs. The aluminum plate features an integrated 15mm LWS rod clamp to mount the plate onto standard, separately available 15mm LWS rods, and it secures using a locking lever.

SHAPE Lightweight Matte Box 4x5.6 with Single Filter Tray

SHAPE Lightweight Matte Box 4x5.6 with Single Filter Tray(SH-LWAKS, SHLWAKS, SH/LWAKS) A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a large variety of wide angle lenses. A single filter tray system with an easy access handle that allow one-handed filter change. The filter tray system opens up from the front by releasing the red safety pin. 4×4 filters can also be installed in the tray. The frame includes two stops at the bottom of the filter tray section to prevent the filter from falling through. Optional removable swing-away and height adjustable rod bloc can be installed for better control. An optional removable light carbon fiber french flag can be attached on top to prevent flares. A series of adaptor rings are included in the kit: Clamp-on adaptor ring: 124-87 mm Threaded aluminum adaptors rings: 87-82 mm / 87-77 mm / 87-72 mm / 87-67 mm Additional clamp-on adaptor rings available (Optional): 124-114 mm / 124-104 mm / 124-100 mm / 124-95 mm

SHAPE Camera Cage for RED Komodo

SHAPE Camera Cage for RED Komodo(SH-KOCAGE, SHKOCAGE, SH/KOCAGE) Improve the accessory mounting possibilities while protecting your RED KOMODO cinema camera with this SHAPE Camera Cage for RED KOMODO. The durable 3-piece cage is built around the top plate that you mount on your KOMODO, allowing you to mount the side riser panels and included 15mm rod clamps. Once mounted on your camera, you've created a sturdy external cage that provides accessory mounting holes, as well as ARRI-compatible rosettes on each side for mounting optional grips to help you when handholding the KOMODO. The cage is replete with 1/4"-20 accessory mounting threads for attaching a variety of available accessories, such as articulating arms. Additional 1/4"-20 and 3/8"-16 threaded holes with ARRI-style anti-twist divots allow you to attach accessories that stay secure and won't unexpectedly twist, which usually happens at the worst moment, ruining the shot. Two individual 15mm spring-loaded rod clamps can be mounted on the cage for adding rod-mounted accessories. The cage retains open access to all ports and controls on the camera, and it disassembles easily into three parts for transport and storage. Cage The advantage of the cage is that it provides a rigid external frame to your RED KOMODO camera for attaching accessories to your camera without stressing your camera's body. This allows you to accessorize without worrying about damaging your camera. Accessorize The cage allows you to add optional grips to your camera via the ARRI-style rosettes, making the RED KOMODO's body more handheld friendly. Rod Clamps   The individual rod clamps can be attached to the cage and allow you to mount optional 15mm rods. The clamps each use a spring-loaded lever for securing your rod on the clamp.

SHAPE Arri Dovetail Shoulder Mount with HAND15 Handles

SHAPE Arri Dovetail Shoulder Mount with HAND15 Handles(SH-HSMDV, SHHSMDV, SH/HSMDV) Easily secure your camera rig onto this ARRI Dovetail Shoulder Mount with Handles thanks to its ARRI-style dovetail plate and dual ARRI rosette handles. The entire system can accommodate 15mm LWS, 15mm studio, and 19mm studio bridge plates for wide compatibility. SHAPE ARRI Dovetail with Adjustable Shoulder Mount Designed to be compatible with all three industry-standard ARRI-Style bridge plates, this ARRI Dovetail with Adjustable Shoulder Mount from SHAPE offers a highly customizable mount for your camera rig. Spring-loaded stoppers on either end of the mount prevent the bridge from sliding off but allow for quick release when pressed. A shoulder pad on the bottom of the dovetail can be adjusted along the track to distribute the rig's weight effectively. Two ARRI rosettes at the front allow you to integrate handgrips of your choice. Constructed with CNC aluminum, the shoulder mount is designed to be durable.

SHAPE shoulder mount kit mattebox follow focus for panasonic GH6

SHAPE shoulder mount kit mattebox follow focus for panasonic GH6(SH-GH6SMKIT, SHGH6SMKIT, SH/GH6SMKIT) The cage is designed with several 1/4-20 threaded holes and seven 3/8in-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included with the cage. The bottom of the cage has three 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. The aluminium top handle included with the cage offers cold shoe mounting options for additional accessories. A second top handle can be added and attached on the sides of the cage for vertical shoots. A 15mm LW rod baseplate system is included and attached underneath the cage with four M4 screws. A height adjustable Metabones bracket is included at the front of the baseplate for additional support. The bottom of the baseplate has three threaded holes to attach quick-release tripod plates. Quick handle rod bloc (HAND5) Quick handle rod blocThe SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminium rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give film makers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. Composite mini shoulder pad (SHPAD3) The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently. Back pad (PAD1) 01 Pad1 Back Pad Product Picture 2000x2000The back pad (PAD1) features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights. 15 mm 18 in rods (15TUBE18) One pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig. SHAPE LIGHTWEIGHT SINGLE FILTER TRAY 4X5.6 MATTE BOX (LWAKS) A silicone matte box mounted on a CNC aluminium main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a large variety of wide angle lenses. A single filter tray system with an easy access handle that allow one-handed filter change. The filter tray system opens up from the front by releasing the red safety pin. 4x4 filters can also be installed in the tray. The frame includes two stops at the bottom of the filter tray section to prevent the filter from falling through. Optional removable swing-away and height adjustable rod bloc can be installed for better control. An optional removable light carbon fiber french flag can be attached on top to prevent flares. A series of adaptor rings are included in the kit: Clamp-on adaptor ring: 124-87 mm Threaded aluminium adaptors rings: 87-82 mm / 87-77 mm / 87-72 mm / 87-67 mm Additional clamp-on adaptor rings available (Optional): 124-114 mm / 124-104 mm / 124-100 mm / 124-95 mm SHAPE kit focus single rod follow focus 15 mm LWs (FA123) Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.  At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminium 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11in whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. At the center of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crank; All gears can be flipped to the front or back position which is helpful for compact lens configurations; Two rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera body; Swing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you're ready;   A compact design takes little space, so you can still attach a matte box to the front;Use the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place.

SHAPE shoulder mount rig for panasonic GH6

SHAPE shoulder mount rig for panasonic GH6(SH-GH6SM, SHGH6SM, SH/GH6SM) The camera is mounted to the cage using a 1/4-20 screw. The cage is designed with several 1/4-20 threaded holes and seven 3/8in-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included with the cage. The bottom of the cage has three 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. The aluminium top handle included with the cage offers cold shoe mounting options for additional accessories. A second top handle can be added and attached on the sides of the cage for vertical shoots. A 15mm LW rod baseplate system is included and attached underneath the cage with four M4 screws. A height adjustable Metabones bracket is included at the front of the baseplate for additional support. The bottom of the baseplate has three threaded holes to attach quick-release tripod plates. Quick handle rod bloc (HAND5) The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminium rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. Composite mini shoulder pad (SHPAD3) The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently. Back pad (PAD1) The back pad (PAD1) features a powder coated anodized aluminium plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2in vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights. 15 mm 18 in rods (15TUBE18) One pair of SHAPE 15-mm aluminium rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig.

SHAPE kit with Mattebox follow focus for Panasonic GH6

SHAPE kit with Mattebox follow focus for Panasonic GH6(SH-GH6KIT, SHGH6KIT, SH/GH6KIT) Panasonic Lumix GH6 Cage (GH6CAGE) Made of CNC-machined aluminium, the cage is specifically designed for the Panasonic Lumix GH6 camera. The camera is mounted to the cage using a 1/4-20 screw. The cage is designed with several 1/4-20 threaded holes and seven 3/8in-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included with the cage. The bottom of the cage has three 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. The aluminium top handle included with the cage offers cold shoe mounting options for additional accessories. A second top handle can be added and attached on the sides of the cage for vertical shoots. A 15mm LW rod baseplate system is included and attached underneath the cage with four M4 screws. A height adjustable Metabones bracket is included at the front of the baseplate for additional support. The bottom of the baseplate has three threaded holes to attach quick-release tripod plates. SHAPE LIGHTWEIGHT SINGLE FILTER TRAY 4X5.6 MATTE BOX (LWAKS) A silicone matte box mounted on a CNC aluminium main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a large variety of wide angle lenses. A single filter tray system with an easy access handle that allow one-handed filter change. The filter tray system opens up from the front by releasing the red safety pin. 4x4 filters can also be installed in the tray. The frame includes two stops at the bottom of the filter tray section to prevent the filter from falling through. Optional removable swing-away and height adjustable rod bloc can be installed for better control. An optional removable light carbon fiber french flag can be attached on top to prevent flares. A series of adaptor rings are included in the kit: Clamp-on adaptor ring: 124-87 mm Threaded aluminium adaptors rings: 87-82 mm / 87-77 mm / 87-72 mm / 87-67 mm Additional clamp-on adaptor rings available (Optional): 124-114 mm / 124-104 mm / 124-100 mm / 124-95 mm SHAPE kit focus single rod follow focus 15 mm LWs (FA123) Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.  At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminium 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel.

SHAPE Camera cage for Panasonic GH6

SHAPE Camera cage for Panasonic GH6(SH-GH6CAGE, SHGH6CAGE, SH/GH6CAGE) The SHAPE Cage and Top Handle for Panasonic GH6 is a formfitting cage specifically designed for the Panasonic Lumix GH6. Made of CNC-machined aluminum, the cage offers multiple 1/4"-20 and 3/8"-16 threaded holes with anti-rotating ARRI hole patterns. The cage allows for unobstructed access to all camera functions, including the memory card and battery compartment, side buttons, and the lens release button. A full-size HDMI cable lock keeps your video cable securely in place, and the camera can be fully operated without having to remove the cable doors. Three 1/4"-20 threaded holes on the bottom of the cage allow you to mount a quick release plate to facilitate switching from a tripod to a shoulder rig configuration. Cold shoe mounting options are available on the included aluminum top handle, and for vertical shoots, a second handle can be attached to the sides of the cage.      

SHAPE Arri Dovetail shoulder mount

SHAPE Arri Dovetail shoulder mount(SH-DOVSM, SHDOVSM, SH/DOVSM) The SHAPE ARRI Dovetail shoulder mount is the newly designed unit meant to be combined with ARRI style bridge plates in all 3 industry standards, (15mm LWS, 15mm Studio & 19mm Studio). The bridge plate can be adjusted front to back, depending on the weight distribution of the camera, and can be locked in the desired position with the side lever. The same can be done with the padding itself, underneath the dovetail section. You can position the padding and lock it in place with its side lever. Spring loaded stoppers are included at the front and back of the shoulder mount to prevent the top bridge plate from sliding out. To release entirely the bridge plate, simply push down on the button and the bridge plate is free. Made of sturdy CNC aluminum, the dovetail section is 12 1/2 inch long and allows a 10 1/2 inches of travel for the bridge plate. It provides stability and can be combined with a variety of our handles given the two ARRI rosettes at the front part of the shoulder mount.

SHAPE Canon C70 Baseplate, Cage with Handles+Matte Box+Follow Focus Pro

SHAPE Canon C70 Baseplate, Cage with Handles+Matte Box+Follow Focus Pro(SH-C70KIT, SHC70KIT, SH/C70KIT) The L-shaped handle features a solid connection to your top plate using mounting screws. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. The handle is constructed from anodized aluminium and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8″-16 ARRI-style anti-twist accessory threads. The front section of the handle features a cold shoe designed to receive a spring-loaded cold shoe foot. This spring-loaded cold shoe foot is designed with a tilting mount bracket with 1/4″-20 threaded screw to mount accessories like a monitor, a video light, or a microphone weighing up to 4.4 lb. Moreover, each end is secured with a knurled locking knob. Once the accessory is mounted, you can tilt it forward or backward and place it at the desired angle. The position is lockable with the included Allen key.

SHAPE Baseplate with Cage, Left-Side Handle & Follow Focus Pro

SHAPE Baseplate with Cage, Left-Side Handle & Follow Focus Pro(SH-C52BRFFP, SHC52BRFFP, SH/C52BRFFP) This kit includes a shoulder mount baseplate with 15mm rod system, a form fitting cage with Arri rosette , a rosette handle with black push-button, and a follow focus pro. The baseplate includes an integrated shoulder mount that allows you to convert your tripod-mounted camera into a handheld shoulder rig. The bottom of the cage attaches to the rear of the camera to support it on the baseplate. The 15mm rods allow you to mount additional accessories like a matte box and follow focus. The push-button handle attaches to the baseplate and can rotate using the rosette joints for the most comfortable position. Canon C500 Mark II, C300 Mark III V-lock quick release baseplate (C52BP) Canon C500 Mark II, C300 Mark III camera cage (C52CAGE) Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this kit made of CNC aluminium. It includes a form fitting side plate with Arri rosette , a top plate and a rear insert plate connecting together to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the native Canon EOS C500 Mark II handle. Canon C500 Mark II, C300 Mark III adapter plate (C52AP) The Canon EOS C500 Mark II Adapter Plate let you quickly attach your camera to your rig. The position of the captive screws perfectly matches the threaded holes of the Canon EOS C500 Mark II camera base. Canon C500 Mark II, C300 Mark III top plate (C52TP) Lightweight and robust CNC machined aluminium top plate designed to fit with the native Canon EOS C500 Mark II top handle. The top plate offers 1/4-20 and 3/8-16 threads with Arri standard anti rotating holes, which can be used to attach options around the camera. The top plate comes with a 3/16’’ Hex wrench and (4) captive screws ¼-20 3/8 to attach the top plate to the camera Top side: (8) ¼-20 and (2) 3/8-16 threaded holes with Arri anti rotating holes Top side: (18) ¼-20 threaded holes Sides: (10) ¼-20 threaded holes with Arri anti rotating holes Double Quick Handle ARRI Rosette Single Shadow (HAND2S) Left or right ARRI Rosettes handgrips that can be attached to cameras or camera support hardware that has standard ARRI rosettes. The arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arm for your comfort. The arm attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. The arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. Follow Focus Pro (FFPRO) Manufactured in sleek black aluminium anodized, this special edition professional follow focus unit combines sleek look with trusted engineering and a classic design. The SHAPE Follow Focus Pro is an industry workhorse and has already proven itself on countless tough shoots all over the world, so you needn’t worry about it letting you down. SHAPE engineering is internationally renowned and there is one of the most robust motion picture accessories ever built. It mounts on 15 mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15 mm rods, allowing for quick attachment, removal, and repositioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks. While the Follow Focus Pro contains the essentials for pulling focus on any type of project production, the choice of either 15 mm rod adaptors means that you can SHAPE the system to meet your particular requirements. 15 mm 8" rods (15TUBE8) Pair of 15 mm rods 8" long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminium tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp. 15 mm 4" rods (15TUBE4) This pair of SHAPE 15 mm Aluminium Rods (4") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

Shape cage with handle for Atomos Shogun 7 monitor

SH-UN7HAND SHUN7HAND SH UN7HAND SH/UN7HAND Shape cage with handle for Atomos Shogun 7 monitor Shape UN7HAND Cage With Handle For Atomos Shogun 7 Monitor Right and left side wooden handle with Padded Strap. The SHAPE wooden handles provide a secure and solid grip for handheld shooting. It features a comfortable padded strap and is designed with a wooden finger grip made from Canadian maple. You can quickly adjust the angle and position of the handgrips by using the lever located on each handle arm. 15 mm LW clamp for top handle can be attached on the top or side corners section of the monitor cage to place the handle arm in appropriate position for manipulation. SHAPE cage for Atomos Shogun 7 monitor (UN7CAGE) Shape Un7cage Shogun 7 CageThe SHAPE monitor cage is designed to provide additional protection for the for Atomos Shogun 7 monitor. The cage strongly mounts to the monitor at the top and bottom with (2) ¼-20 screws. Across all sides and rear side, the Shogun 7 cage is designed with multiple ¼-20 and 3/8-16 threaded holes with ARRI anti rotating lock system for ultimate flexibility and solidity in mounting options. The cage is also designed with an integrated locking system to secure your SSD drive to your monitor. Finally, two attachment points on both the top and bottom of the cage let you mount the Atomos Shogun 7 Sun hood frame to the cage. In option, you can use the HDMI Lock System from SHAPE (NIVLK) to protect and lock the HDMI in and out cables on the side of the Atomos Shogun 7 Monitor. Made of lightweight CNC-machined aluminium, the main bracket connects to the monitor with two custom-fit screw holes. The HDMI locking system features adjustable brackets to fit your HDMI cable size, and two captive thumbscrews are included to secure the cables tightly. The lock system keeps SSD Drive access clear, and it is also compatible with the Atomos Sun Hood.

Shape Sachtler tripod pan telescopic handle with push-button

SH-TRIPAN1 SHTRIPAN1 SH TRIPAN1 SH/TRIPAN1 Shape Sachtler tripod pan telescopic handle with push-button Shape Sachtler Tripod Pan Telescopic Handle With Push-Button The SHAPE tripod pan handle is perfect for all types of cameramen, it allows you to comfortably position your Sachtler tripod on set in a variety of situations such as limited space, a higher position or a tight closet. The telescopic handgrip with rosette can be attached to your Sachtler tripod. The arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arm position. The ratchet knob along the arm allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. For a shorter configuration, you can easily disassemble the push-button rubber handgrip from the telescopic arm and mount it to the rosette adapter. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

Shape T-Shape pro top handle with Arri standard thread

SH-TPST SHTPST SH TPST SH/TPST Shape T-Shape pro top handle with Arri standard thread L-SHAPE pro top handle with Arri standard thread (LPHT) Add numerous accessories to your rig with the L-Shape Pro Top Handle with ARRI-Style Accessory Threads from SHAPE. The L-shaped handle features a solid connection to your cage or rig using mounting screws. The handle is constructed from anodized aluminum and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8"-16 ARRI-style anti-twist accessory threads so you can add a wide variety of accessories. The front and rear of the handle also feature ARRI-style accessory threads to add separately available SHAPE accessories such as 15mm rod mounts or 3/8"-16 threaded adapters.

Shape touch and go quick release receiver base

SH-TGRB SHTGRB SH TGRB SH/TGRB Shape touch and go quick release receiver base The SHAPE Touch & Go Receiver Base supports the optional SHAPE Touch & Go Flying Plate as well as the plates of the Sachtler 35, 120mm OConnor Euro, and Ronford Baker RBQ Touch & Go systems. It allows for swapping plates to and from these systems. Offering 1/4"-20 and 3/8"-16 mounting threads on the bottom, the Receiver Base allows you to attach the mounting plates of other Touch & Go systems on the bottom of it. In this way, it can be mounted on those systems. The result is that it provides support for the plate size of the above-mentioned systems as well as its own. Technically though, because it offers mounting threads on the bottom, there's nothing to stop you from attaching it to various other supports, as long as you're able to secure them to the bottom of the Receiver Base. When the optional Touch & Go Flying Plate is inserted into the Receiver Base, it snaps in and stays there. A lever on the rear locks it tight. This same lever also releases the plate.

Shape touch and go flying plate system

SH-TGCFP SH TGCFP SHTGCFP SH/TGCFP Shape touch and go flying plate system SHAPE's Touch & Go Quick Release System is designed to be compatible with the Sachtler 35, 120mm OConnor Euro, and Ronford Baker RBQ Touch & Go systems, allowing for swapping to and from these systems. It consists of a Receiver Base and Touch & Go Flying Plate. The plate can be attached to the bottom of many cine cameras and the cameras then mounted on the Receiver Base or the bases of the above third-party systems. The plate can likewise be secured on the bottom of camera rigs. Offering 1/4"-20 and 3/8"-16 mounting threads on the bottom, the Receiver Base allows you to attach the mounting plates of other Touch & Go systems on the bottom of it. In this way, it can be mounted on those systems. The result is that it provides support for the plate size of the above-mentioned systems as well as its own. Technically though, because it offers mounting threads on the bottom, there's nothing to stop you from attaching it to various other supports, as long as you're able to somehow secure them to the bottom of the Receiver Base. When the included Touch & Go Flying Plate is inserted into the Receiver Base, it snaps in and stays there. A lever on the rear locks it tight. This same lever also releases the plate.

Shape telescopic Push-Button magic arm with mini quick release

SH-RTPQS SHRTPQS SH RTPQS SH/RTPQS Shape telescopic Push-Button magic arm with mini quick release Mini Quick Release Lock Station Top section of the magic arm is designed with a (V-mount) Mini Quick Release Lock Station, to mount our Mini Delta Monitor Plate (MILTA) The red quick release button is easy to access and designed to prevent unwanted monitor or accessory release. Mini Delta Monitor Plate ( MILTA)(24 x 50 x 50 mm) The Mini Delta Monitor Plate (MILTA) is designed with a Mini Delta Plate and a sliding bracket with 2 anti-rotating support pins to hold your monitor The Mini Delta Plate (28mm x 24mm ) can be installed in both direction on the bracket, allowing you to position the anti-rotating support pins in the front or back of the monitor The 2 anti-rotating support pins are 11mm height, 8mm diameter and are designed to keep your monitor in place Strongly attach your monitor to the bracket with (1) ¼-20 captive screw and use the sliding feature to rest your monitor onto the anti rotating stoppers (Due to the different thickness of monitors, the sliding plate can be adjusted so the monitor rest on the anti rotating stoppers) The sliding distance between the centre of the captive screw and the 2 anti rotating stoppers goes from 12mm to 35mm, meaning that you have 23mm freedom to adjust your monitor to the stoppers.  Patented Push-Button Technology Precise and fast adjustments of the magic arm with our patented Push-Button Technology, allowing you to make vertical and horizontal positioning adjustments of the monitor from the top or the bottom of the magic arm Nothing to unscrew - Push, Adjust, Release, and then its lock New redesigned Push-Button is machined in a single bloc to insure maximum efficiency of the Mechanism Featuring (2) 19mm Push-Button at the bottom section of the arm and (1) 15mm Mini Push-Button at the top section to give you more flexibility.  Telescopic Arm Telescopic arm with ratchet knob system allows 360 degrees rotation and 66mm (2.6 ‘’) extension Not too long to maximise strength but just enough to allow a comfortable manipulation of your monitor Minimum length configuration: 6.5’’– 10.7’’ Maximum length configuration with Telescopic extension: 9.1’’ – 13.3’’

Shape Nucleus trigger grips rod bloc

SH-NTGRB SHNTGRB SH NTGRB SH/NTGRB Shape Nucleus trigger grips rod bloc The two clamps re-locator let you mount the left and right Tilta Nucleus-M wireless handle grip to the body frame of SHAPE quick handle rod bloc with Push-button system (HAND5). The combination of these two let you have the best handheld stabiliser on the market in addition to the Tilta Nucleus-M properties. Once installed, you can take advantage of the full potential of our Push-button technology. Quick handle rod bloc (HAND5) The SHAPE Quick handle rod bloc is a professional video stabilisation accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodised aluminium rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock.

Shape lens support for 15mm studio bridge plate

SH-LEN15 SHLEN15 SH LEN15 SH/LEN15 Shape lens support for 15mm studio bridge plate Supports heavy lenses when using 15mm studio offset rods; 100mm spacing Snap-On design, enabling you to attach the support Snaps onto 15mm studio rods without having to remove other rod-mounted accessories. Simply click on the side button to release the clamp from the rods. Reversible 1/4"-20 and 3/8"-16 threaded mounting stud, allowing you to quickly fix your lenses. Vertical travel distance adjustment of 1.5” (3.81 cm). Rubber padded Y-Lens Adapter for smooth support and protection of your lens. Ratchet knob system and spring-loaded locking lever provide extra grip when tightening or loosening the lens support shaft underneath the lens. Tighten the knob to strongly secure the lens support clamps to the rods. Left side of the clamp designed with 1x Anti-Twist 3/8"-16 accessory mounts. Made with a durable CNC Machined Aluminium and stainless-steel construction.

Shape Camera Cage with Top Handle for Red Komodo

SH-KOTHC SHKOTHC SH KOTHC SH/KOTHC Shape Camera Cage with Top Handle for Red Komodo SHAPE camera cage for RED Komodo (KOCAGE) The three-piece cage kit offers protection and accessory-mounting threads for your RED Digital Cinema Komodo 6K camera. This lightweight, three-piece cage maintains access to your camera’s controls and ports and come with thread holes side plates with M6 ARRI rosette on both sides. Made of CNC anodize aluminium., the top plate (KOMOTP) can be mounted strongly at the top of your RED Digital Cinema Komodo 6K camera using two 1/4″-20 UNC socket head cap screws. The plate features 3/8″-16 and ¼ 20 UNC threaded mounting holes, including the ARRI anti-rotating system to better secure your accessories. Two removable 15 mm LW rod bloc clamp (15CTH) can be mounted at the front of the top plate, allowing easy positioning of your accessories. Each sides of the rod bloc clamp are also designed with a ratchet system to strongly secure your rods to the rig. The L-shaped handle features a solid connection to your top plate using mounting screws. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. The handle is constructed from anodized aluminium and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8″-16 ARRI-style anti-twist accessory threads. The front section of the handle features a cold shoe designed to receive a spring-loaded cold shoe foot. This spring-loaded cold shoe foot is designed with a tilting mount bracket with 1/4″-20 threaded screw to mount accessories like a monitor, a video light, or a microphone weighing up to 4.4 lb. Moreover, each end is secured with a knurled locking knob. Once the accessory is mounted, you can tilt it forward or backward and place it at the desired angle. The position is lockable with the included Allen key. Side plates threaded holes: (2) 3/8-16 with anti-rotating (2) ¼-20 with anti-rotating (1) Arri Rosette mount on each side plate Top plate threaded holes: (1) 3/8-16 with anti-rotating (4) ¼-20 with anti rotating (9) ¼-20 15 mm LW clamp for top handle (15CTH) 01 Shape 15cth Product Picture 2The clamp is made of CNC aluminium and can be attached to our REVOLT Top Handle. The clamp is designed to support a 15 mm stud, like our REVOLT EVF Mount Bracket. The ratchet knob device let you adjust and strongly fix the position of the stud to top handle.

Shape Red Komodo Shoulder Mount with Matte Box and Follow Focus

SH-KOSMKIT SHKOSMKIT SH KOSMKIT SH/KOSMKIT Shape Red Komodo Shoulder Mount with Matte Box and Follow Focus The three-piece cage kit, the 15 mm LW baseplate system and the L-shaped top handle offer protection and accessory-mounting threads for your RED Digital Cinema Komodo 6K camera. The 15 mm LW Baseplate system is designed to match the RED® KOMODO™ optical center with or without the expander module. It features an adapter plate, a dovetail spacer with Arri rosette mounts and a 15 mm LW baseplate. Strongly mount the dovetail plate at the bottom of your camera body with 1/4-20 and 3/8-16 screws. The dovetail plate slides into the dovetail spacer which is mount to the 15 mm LW baseplate. Simply slide out from your dovetail spacer and slide it back into your ronin 2 gimbal system without having to screw or unscrew any plates. The dovetail spacer can receive SHAPE Arri rosette on both sides and features 3/8"-16, ARRI-style anti-twist threads to mount accessories. The 15 mm LW baseplate comes with a pair of 15 mm rods 12” and the bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. The three-piece cage kit and L-shaped top handle offer protection and accessory-mounting threads for your RED® KOMODO™ camera. The L-shaped handle features a solid connection to your top plate using mounting screws. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. The handle is constructed from anodized aluminum and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8″-16 ARRI-style anti-twist accessory threads. The front section of the handle features a cold shoe designed to receive a spring-loaded cold shoe foot. This spring-loaded cold shoe foot is designed with a tilting mount bracket with 1/4″-20 threaded screw to mount accessories like a monitor, a video light, or a microphone weighing up to 4.4 lb. Moreover, each end is secured with a knurled locking knob. Once the accessory is mounted, you can tilt it forward or backward and place it at the desired angle. The position is lockable with the included Allen key. The three-piece cage kit offers protection and accessory-mounting threads for your RED® KOMODO™ camera. This lightweight, three-piece cage maintains access to your camera's controls and ports and come with thread holes side plates with M6 ARRI rosette on both sides. Made of CNC anodize aluminum., the top plate (KOMOTP) can be mounted strongly at the top of your RED® KOMODO™ camera using two 1/4″-20 UNC socket head cap screws. The plate features 3/8″-16 and ¼ 20 UNC threaded mounting holes, including the ARRI anti-rotating system to better secure your accessories. Two removable 15 mm LW rod bloc clamp (15CTH) can be mounted at the front of the top plate, allowing easy positioning of your accessories. Each sides of the rod bloc clamp are also designed with a ratchet system to strongly secure your rods to the rig.  The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently. The back pad (PAD1) features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights. Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.  At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminum 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a variety of wide-angle lenses. Two 4×5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4×4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. The removable swing-away module makes lens changes a snap. A spring pin helps to lock the mechanism closed without manually setting the pin. 2 magnets hold it in place when closed. Removable height adjustable rod block with one tightening knob allows micro-adjustment of height, ensuring compatibility with a wide range of lenses. The rod block can be re-installed directly on the main frame for a straight configuration. The complete kit allows three different configurations, (swing-away, straight and clip-on). Removable light carbon fiber french flag can be attached to the top to prevent flares. A series of adapter rings are included in the kit: Clamp-On adapter ring: 124-87 mm Threaded aluminium adapter rings: 87-82 mm 87-77mm 87-72mm 87-67mm Fabric knicker: 124mm Pair of 15 mm rods 18" long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminum tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.

Shape Full Camera Cage with 15mm LW rod system for Red Komodo

SH-KOROD SHKOROD SH KOROD SH/KOROD Shape Full Camera Cage with 15mm LW rod system for Red Komodo The three-piece cage kit, the 15 mm LW baseplate system and the L-shaped top handle offer protection and accessory-mounting threads for your RED Digital Cinema Komodo 6K camera. SHAPE camera cage with top handle for RED Komodo (KOTHC) The three-piece cage kit and L-shaped top handle offer protection and accessory-mounting threads for your RED Digital Cinema Komodo 6K camera. The L-shaped handle features a solid connection to your top plate using mounting screws. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. The handle is constructed from anodized aluminum and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8″-16 ARRI-style anti-twist accessory threads. The front section of the handle features a cold shoe designed to receive a spring-loaded cold shoe foot. This spring-loaded cold shoe foot is designed with a tilting mount bracket with 1/4″-20 threaded screw to mount accessories like a monitor, a video light, or a microphone weighing up to 4.4 lb. Moreover, each end is secured with a knurled locking knob. Once the accessory is mounted, you can tilt it forward or backward and place it at the desired angle. The position is lockable with the included Allen key. SHAPE camera cage for RED Komodo (KOCAGE) The three-piece cage kit offers protection and accessory-mounting threads for your RED Digital Cinema Komodo 6K camera. This lightweight, three-piece cage maintains access to your camera’s controls and ports and come with thread holes side plates with M6 ARRI rosette on both sides. Made of CNC anodize aluminum., the top plate (KOMOTP) can be mounted strongly at the top of your RED Digital Cinema Komodo 6K camera using two 1/4″-20 UNC socket head cap screws. The plate features 3/8″-16 and ¼ 20 UNC threaded mounting holes, including the ARRI anti-rotating system to better secure your accessories. Two removable 15 mm LW rod bloc clamp (15CTH) can be mounted at the front of the top plate, allowing easy positioning of your accessories. Each sides of the rod bloc clamp are also designed with a ratchet system to strongly secure your rods to the rig. Side plates threaded holes: (2) 3/8-16 with anti-rotating (2) ¼-20 with anti-rotating (1) Arri Rosette mount on each side plate Top plate threaded holes: (1) 3/8-16 with anti-rotating (4) ¼-20 with anti rotating (9) ¼-20 15 mm LW clamp for top handle (15CTH) 01 Shape 15cth Product Picture 2The clamp is made of CNC aluminum and can be attach to our REVOLT Top Handle. The clamp is designed to support a 15 mm stud, like our REVOLT EVF Mount Bracket. The ratchet knob device let you adjust and strongly fix the position of the stud to top handle. SHAPE RED Komodo 15 mm lightweight Baseplate (B15KOMO) The 15 mm LW Baseplate system is designed to match the RED Digital Cinema Komodo 6K optical center with or without the KOMODO expander module. It features an adapter plate, a dovetail spacer with Arri rosette mounts and a 15 mm LW baseplate. Strongly mount the dovetail plate at the bottom of your camera body with 1/4-20 and 3/8-16 screws. The dovetail plate slides into the dovetail spacer which is mount to the 15 mm LW baseplate. Simply slide out from your dovetail spacer and slide it back into your ronin 2 gimbal system without having to screw or unscrew any plates. The dovetail spacer can receive SHAPE Arri rosette on both sides and features 3/8″-16, ARRI-style anti-twist threads to mount accessories. The 15 mm LW baseplate comes with a pair of 15 mm rods 12” and the bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. 15 mm 12" rods (15TUBE12) This pair of SHAPE 15 mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Red Komodo Camera Cage and Shoulder Baseplate with Handles

SH-KOMOBR SHKOMOBR SH KOMOBR SH/KOMOBR Shape Red Komodo Camera Cage and Shoulder Baseplate with Handles The three-piece cage kit and L-shaped top handle offer protection and accessory-mounting threads for your RED® KOMODO™ camera. The L-shaped handle features a solid connection to your top plate using mounting screws. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. The handle is constructed from anodized aluminium and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8″-16 ARRI-style anti-twist accessory threads. The front section of the handle features a cold shoe designed to receive a spring-loaded cold shoe foot. This spring-loaded cold shoe foot is designed with a tilting mount bracket with 1/4″-20 threaded screw to mount accessories like a monitor, a video light, or a microphone weighing up to 4.4 lb. Moreover, each end is secured with a knurled locking knob. Once the accessory is mounted, you can tilt it forward or backwards and place it at the desired angle. The position is lockable with the included Allen key.  

Shape Red Komodo Kit with Matte Box and Follow Focus

SH-KOKIT SHKOKIT SH KOKIT SH/KOKIT Shape Red Komodo Kit with Matte Box and Follow Focus SHAPE full camera cage with 15 mm LW rod system for RED Komodo (KOROD) The three-piece cage kit, the 15 mm LW baseplate system and the L-shaped top handle offer protection and accessory-mounting threads for your RED Digital Cinema Komodo 6K camera. SHAPE camera cage with top handle for RED Komodo (KOTHC) The three-piece cage kit and L-shaped top handle offer protection and accessory-mounting threads for your RED Digital Cinema Komodo 6K camera. The L-shaped handle features a solid connection to your top plate using mounting screws. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. The handle is constructed from anodized aluminium and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8″-16 ARRI-style anti-twist accessory threads. The front section of the handle features a cold shoe designed to receive a spring-loaded cold shoe foot. This spring-loaded cold shoe foot is designed with a tilting mount bracket with 1/4″-20 threaded screw to mount accessories like a monitor, a video light, or a microphone weighing up to 4.4 lb. Moreover, each end is secured with a knurled locking knob. Once the accessory is mounted, you can tilt it forward or backward and place it at the desired angle. The position is lockable with the included Allen key. SHAPE camera cage for RED Komodo (KOCAGE) The three-piece cage kit offers protection and accessory-mounting threads for your RED Digital Cinema Komodo 6K camera. This lightweight, three-piece cage maintains access to your camera's controls and ports and come with thread holes side plates with M6 ARRI rosette on both sides. Made of CNC anodize aluminium., the top plate (KOMOTP) can be mounted strongly at the top of your RED Digital Cinema Komodo 6K camera using two 1/4″-20 UNC socket head cap screws. The plate features 3/8″-16 and ¼ 20 UNC threaded mounting holes, including the ARRI anti-rotating system to better secure your accessories. Two removable 15 mm LW rod bloc clamp (15CTH) can be mounted at the front of the top plate, allowing easy positioning of your accessories. Each sides of the rod bloc clamp are also designed with a ratchet system to strongly secure your rods to the rig.  SHAPE RED Komodo 15 mm lightweight Baseplate (B15KOMO) The 15 mm LW Baseplate system is designed to match the RED Digital Cinema Komodo 6K optical center with or without the KOMODO expander module. It features an adapter plate, a dovetail spacer with Arri rosette mounts and a 15 mm LW baseplate. Strongly mount the dovetail plate at the bottom of your camera body with 1/4-20 and 3/8-16 screws. The dovetail plate slides into the dovetail spacer which is mount to the 15 mm LW baseplate. Simply slide out from your dovetail spacer and slide it back into your ronin 2 gimbal system without having to screw or unscrew any plates. The dovetail spacer can receive SHAPE Arri rosette on both sides and features 3/8"-16, ARRI-style anti-twist threads to mount accessories. The 15 mm LW baseplate comes with a pair of 15 mm rods 12” and the bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. SHAPE kit focus single rod follow focus 15 mm LWs (FA123) Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.  At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminium 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. At the center of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crank; All gears can be flipped to the front or back position which is helpful for compact lens configurations; Two rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera body; Swing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you're ready; A compact design takes little space, so you can still attach a matte box to the front; Use the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place. Matte box 4x5.6 (MAT4X56) The 2-Stage 4 x 5.6" matte box from SHAPE can be used as a clip-on matte box and can be mounted on industry-standard 15 mm rod system. It is designed for light control, insertion, and adjustment of filters. It features a two-stage rotating 4 x 5.6" filter holder. The matte box accepts lenses with a front diameter up to 114 mm. It comes with a 82 mm filter ring and six step-up rings that allow you to fit lenses with an outer diameter (52-82, 58-82, 62-82, 67-82, 72-82, 77-82)mm. 15 mm 12" rods (15TUBE12) This pair of SHAPE 15 mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Compact quick handle Arri rosette black

SH-HAND15 SHHAND15 SH HAND15 SH/HAND15 Shape Compact quick handle Arri rosette black Each arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arms for your comfort. The arms attach to your camera or support via an Arri compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. Each arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its Push-button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

Shape Gold mount pivoting battery plate for Canon C70

SH-GBC70 SHGBC70 SHGBC70 SH/GBC70 Shape Gold mount pivoting battery plate for Canon C70 The SHAPE Gold-Mount pivoting battery plate for Canon C70 attaches to the rear of the top plate (C70TP) and supports a Gold-mount battery while leaving access to the camera’s standard battery compartment. Our Gold-mount battery plate provides the right battery voltage and amperage to use with your CANON C70 camera. By pivoting the battery plate, you have access to the battery of the camera and also allows hot swap features. A swivel system let you pivot the battery plate up and down. It features 1 D-Tap port for powering accessories. It also uses a digital fuse that monitors the D-Tap ports and disables them if they exceed the set current for accessories while leaving the camera running. It connects to the camera using the SHAPE 14.4 output D-Tap power cable for Canon C70. The cable regulates the voltage from a D-Tap source to the proper 14.4 V required to power your Canon C70 camera. This allows you to power your camera using any V-mount battery with a D-Tap plug. The cable has a total end-to-end length of 15″ (38 cm). A universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes. The cheeseplate can tilt up and down with a patented 15 mm Push-button system to provide an easy access to the rear screen.  

Shape Sony FX9 cage top handle

SH-FX9THC SHFX9THC SH FX9THC SH/FX9THC Shape Sony FX9 cage top handle Add accessories to your Sony PXW-FX9 camera with this Camera Cage with Top Handle from SHAPE. It features a cheese-style cage with top plate, side rail, and baseplate, as well as a top handle with wooden finger grip. The FX9 mounts onto the cage using the baseplate and top plate. The cage and handle incorporate 1/4"-20 and 3/8"-16 threaded mounting holes, ARRI-style accessory threads, and an ARRI-style rosette. Formfitting cage with Arri rosette and mounting options Top handle with multiple mounting options Made of CNC aluminium

Shape Sony FX9 shoulder mount

SH-FX9SM SHFX9SM SH FX9SM SH/FX9SM Shape Sony FX9 shoulder mount he Shoulder Mount from SHAPE is an adjustable, lightweight, and compact 15mm LWS shoulder mount rig designed for the Sony PXW-FX9 camera. The rig is built around the baseplate and a set of four 8" 15mm rods, and it includes quick release handgrips, a shoulder pad, and a back pad. The baseplate can be used to mount your camera or additional baseplate, there are tripod mounting threads underneath, and the 18" long 15mm rods pass through the baseplate. For shoulder-mounted shooting, handles and a shoulder pad are included to mount onto the front and back of the rods. The handles feature rosettes and SHAPE's patented spring-loaded push-button technology that lets you quickly adjust the angle of the grips on the fly with just the push of your thumb. For additional support and comfort, a back pad is also included that attaches to the rear of the shoulder pad. Quick release baseplate with 15 mm rods 18″ Quick release handgrips with Push-button and 15 mm rod bloc Shoulder pad and back pad, padded for superior comfort  

Shape Sony FX9 Kit with baseplate/cage/top handle/long VF/4x5.6 matte box/follow focus pro

SH-FX9KIT SHFX9KIT SH FX9KIT SH/FX9KIT Shape Sony FX9 Kit with baseplate/cage/top handle/long VF/4x5.6 matte box/follow focus pro Add accessories and handheld functionality to your Sony PXW-FX9 camera with this Pro Shoulder Rig Kit from SHAPE. This extensive kit includes a shoulder mount baseplate with 15mm rod system, a camera cage, a rear insert plate, a rosette handle with extension, a viewfinder bracket, a modular top handle, a 4 x 5.6" matte box, and a follow focus pro. The baseplate includes an integrated shoulder mount that allows you to convert your tripod-mounted camera into a handheld shoulder rig. The rear insert plate attaches to the rear of the camera to support it on the baseplate. The 15mm rods allow you to mount additional accessories, as well as the 4 x 5.6" matte box and the follow focus pro. The remote extension handle and handgrip both attach to the baseplate and can rotate using the rosette joints for the most comfortable position. The modular top handle can be adjusted to be longer or shorter for your preference, and the viewfinder bracket attaches to the front of the top handle.

Shape Sony FX9 cage handle EVF mount

SH-FX9EVFC SHFX9EVFC SH FX9EVFC SH/FX9EVFC Shape Sony FX9 cage handle EVF mount This Camera Cage Kit with Baseplate, Top Handle & EVF Mount from SHAPE is designed to support the Sony PXW-FX9 camera. The kit includes a camera cage, a baseplate, a pair of 15mm rods, a top handle, and an EVF mount. The aluminium cage and baseplate feature 1/4"-20, 3/8"-16, and ARRI-style accessory threads to secure your camera and accessories, and the cage also features a rosette for a handle or extension arm. The cheese-style top handle features multiple accessory threads, and the EVF mount attaches to the front of the top handle. The baseplate includes a pair of 15mm rods that are 12" long and insert through the length of the baseplate, and they're secured with a locking thumbscrew. Formfitting cage with Arri rosette and mounting options Baseplate with 15 mm rod system Top handle with EVF mount Made of CNC aluminium

Shape Sony FX9 camera cage

SH-FX9CAGE SHFX9CAGE SH FX9CAGE SH/FX9CAGE Shape Sony FX9 camera cage Compatible with the Sony FX9 Add accessories to your Sony PXW-FX9 camera with this Camera Cage from SHAPE. It features a cheese-style top plate, side rail, and baseplate. The FX9 mounts onto the cage using the baseplate and top plate with integrated mounting screws. The cage incorporates 1/4"-20 and 3/8"-16 threaded mounting holes ARRI-style accessory threads, and an ARRI-style rosette for a separately available handle or an extension arm. Formfitting cage with Arri rosette and mounting options Made of CNC aluminium

Shape Sony FX9 baseplate cage follow focus pro

SH-FX9BRFFP SHFX9BRFFP SH FX9BRFFP SH/FX9BRFFP Shape Sony FX9 baseplate cage follow focus pro Compatible with Sony FX9 Add accessories and handheld functionality to your Sony PXW-FX9 camera with this Camera Cage Kit with Baseplate and Follow Focus Pro from SHAPE. This kit includes a V-lock baseplate with 15mm rod system, a camera cage, a rear insert plate, a rosette handle, and a follow focus pro. The baseplate includes an integrated shoulder mount that allows you to convert your tripod-mounted camera into a handheld shoulder rig. The 15mm rods allow you to mount additional accessories as well as the follow focus pro. The handle attaches to the baseplate and can rotate using the rosette joint for the most comfortable position.

Shape Sony FX9 V-lock quick release baseplate

SH-FX9BP SHFX9BP SH FX9BP SH/FX9BP Shape Sony FX9 V-lock quick release baseplate V-Lock Quick Release Baseplate for Sony FX9. The FX9 baseplate is designed to match the Sony FX9 optical center. The bracket system with magnet let you swivel the baseplate to the left for an easy access to the camera screws. It is designed with 2 standard Arri rosettes for handles or accessories mount. The quick release adapter plate is compatible with most VCT tripod plate and there is also a protective rubber pads on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated tool box to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key. Sony FX9 rear insert plate (FX9RIP) The rear insert plate is a CNC aluminium support plate compatible with the Sony FX9 camera. The plate mounts to the camera body via three M4 mounting screws. The center of the plate is designed with (3) 3/8-16 and (3) 1/4-20 threaded holes for tripod mount. The large surface of the plate also provides necessary support when the camera is mount to a tripod or a shoulder mount. 15 mm 8" rods (15TUBE8) Pair of 15 mm rods 8" long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminium tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp. 15 mm 4" rods (15TUBE4) This pair of SHAPE 15 mm Aluminium Rods (4") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

Shape Sony FX6 Push-Button View Finder Mount

SH-FX6VF SHFX6VF SH FX6VF SH/FX6VF Shape Sony FX6 Push-Button View Finder Mount The Push-Button Viewfinder Mount for Sony FX6 is designed with two 15 mm Push-Button for horizontal, vertical, and transversal adjustments. By simply pressing the SHAPE patented push-button, you are allowed a 360-degree rotation to place your viewfinder in the best position for your use. Push, adjust, release, and then it’s locked. Also, the rod clamp with ratchet knob allows you to slide the bracket for a perfect viewfinder distance adjustment.

Shape Sony FX6 Camera Cage and 15mm LW rod system

SH-FX6ROD SHFX6ROD SH/FX6ROD SHFX6ROD Shape Sony FX6 Camera Cage and 15mm LW rod system Add accessories and handheld functionality to your Sony FX6 camera with this kit made of CNC aluminium. It includes a form-fitting side plate with Arri rosette, a top plate and the adaptor plate connecting together with the side post to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the factory Sony FX6. The bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod The lightweight baseplate with 15 mm rod system is designed to match the SONY FX6 optical center. It features two attachment points (1/4-20 and 3/8-16) to securely mount the SONY FX6 body. The baseplate also comes with a pair of 15 mm rods that are 12” long through the length of the baseplate.

Shape Sony FX6 Kit inc Baseplate/Top Plate/Cntrl Top Handle/VF mount/Matte Box/Follow Focus Pro

SH-FX6KIT SHFX6KIT SH FX6KIT SH/FX6KIT Shape Sony FX6 Kit inc Baseplate/Top Plate/Cntrl Top Handle/VF  mount/Matte Box/Follow Focus Pro Sony FX6 Push-Button view finder mount (FX6VF) The Push-Button Viewfinder Mount for Sony FX6 is designed with a 15 mm rod and 2 Push-Button for horizontal, vertical, and transversal adjustments. By simply pressing the SHAPE patented push-button, you are allowed a 360-degree rotation to place your view finder in the best position for your use. Push, adjust, release, and then it’s locked. Also, the rod clamp with ratchet knob allows you to slide the bracket for a perfect viewfinder distance adjustment. Follow Focus Pro (FFPRO) Manufactured in sleek black aluminium anodized, this special edition professional follow focus unit combines sleek look with trusted engineering and a classic design. The SHAPE Follow Focus Pro is an industry workhorse and has already proven itself on countless tough shoots all over the world.

Shape Sony FX6 Side Handle Adaptor to ARRI Rosette

SH-FX6HAR SHFX6HAR SH FX6HAR SH/FX6HAR Shape Sony FX6 Side Handle Adaptor to ARRI Rosette The side handle adaptor for Sony FX6 Camera from SHAPE is designed to reposition the FX6 remote grip away from the camera while retaining full remote functionality. Compatible with ARRI standard rosette, this adapter allows you to move the SONY hand grip either on the side of the SHAPE SONY FX6 camera cage (FX6CAGE) or any other accessory that includes a standard ARRI rosette. Compact for both storage and travel, the FX6 side handle adaptor provides a more customized and comfortable fit. The handle angle adjustment let you maintain full functionality after relocation. The handle adaptor easily mounts using an ARRI style rosette connection on one side, and a native Sony grip connection on the other.

Shape Sony FX6 Camera Cage

SH-FX6CAGE SHFX6CAGE SH FX6CAGE SH/FX6CAGE Shape Sony FX6 Camera Cage Add accessories and handheld functionality to your Sony FX6 camera with this kit made of CNC aluminium. It includes a form-fitting side plate with Arri rosette, a top plate and the adaptor plate connecting together with the side post to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the factory Sony FX6. The bottom of the plate features several 1/4″-20 and 3/8″-16 holes for mounting and balancing your camera on equipment like a tripod.

Shape Sony FX6 Baseplate and Top Plate with Handle

SH-FX6BT SH FX6BT SHFX6BT SH/FX6BT Shape Sony FX6 Baseplate and Top Plate with Handle SHAPE FX6BT Baseplate with Top Plate Kit for Sony FX6 Lightweight and robust CNC machined aluminium top plate designed to fit around the native Sony FX6 top handle. The top plate offers an array of 1/4-20 and 3/8-16 threads with Arri standard anti rotating holes, which can be used to attach options around the camera. The Sony FX6 top plate is also designed with a threaded hole to insert your FX6 sensor pin and your FX6 viewfinder cable clamp. You can also upgrade your top plate with 15CTH 15 mm lw rod clamp or FX6VF push-button view finder mount. The REVOLT VCT Universal Baseplate (BP10) offers a unique design, created for both amateur and professional filmmakers seeking camera supports & stabilizers of high quality. It features a front to back sliding plate allowing quick positioning of your camera accessories for an optimal adjustment of your camera’s center of gravity and weight distribution. It is designed with 2 standard Arri rosettes for handles mount and there is a standard quick release adapter plate compatible with most VCT tripod plate. There is also protective rubber pads on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. It comes with 2 pairs of 15 mm rods (8''and 4'') made of reliable aluminium coated with a clear finish. The safety ratchet knobs are built in a way to apply optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated tool box to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time-saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key. Left ARRI Rosettes handgrips that can be attached to cameras or camera support hardware that has standard ARRI rosettes. The arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arm for your comfort. The arm attaches to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. The arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. Pair of 15 mm rods 8" long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminium tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp. This pair of SHAPE 15 mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

Shape Sony FX6 Baseplate with Handle

SH-FX6BR SHFX6BR SH FX6BR SH/FX6BR Shape Sony FX6 Baseplate with Handle SHAPE FX6BR Baseplate with Handle for Sony FX6 The REVOLT VCT Universal Baseplate (BP10) offers a unique design, created for both amateur and professional filmmakers seeking camera supports & stabilizers of high quality. It features a front to back sliding plate allowing quick positioning of your camera accessories for an optimal adjustment of your camera’s center of gravity and weight distribution. It is designed with 2 standard Arri rosettes for handles mount and there is a standard quick release adapter plate compatible with most VCT tripod plate. There is also protective rubber pads on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. It comes with 2 pairs of 15 mm rods (8''and 4'') made of reliable aluminium coated with a clear finish. The safety ratchet knobs are built in a way to apply optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated toolbox to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time-saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key. Left ARRI Rosettes handgrips that can be attached to cameras or camera support hardware that has standard ARRI rosettes. The arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arm for your comfort. The arm attaches to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. The arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

Shape Sony FX3 Shoulder Mount Kit with Matte Box and Follow Focus

SH-FX3SMKIT SHFX3SMKIT SH FX3SMKIT SH/FX3SMKIT Shape Sony FX3 Shoulder Mount Kit with Matte Box and Follow Focus Sony FX3 Cage (FX3) CNC-milled aluminum cage specifically designed to protect and support the Sony FX3. Includes a cold shoe, ARRI rosette, seven 3/8-16 threaded mount points, and multiple ¼-20 threaded mount points. The cage design allows access to all camera controls and side outputs, as well as memory cards, battery compartment, lens release, doors, locks, and hot shoe. In addition, A detachable lock protection system to secure and hold in place your 4K FULL HDMI cable is included with the cage. Also included is a top plate with a left-hand threaded ARRI hole patterns that fits on top of Sony’s factory handle. The cage can be fitted with a quick release tripod plate or DELTA adapter. Quick handle rod bloc (HAND5)   The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. Composite mini shoulder pad (SHPAD3) The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently. Back pad (PAD1) The back pad (PAD1) features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights. 15 mm 18 in rods (15TUBE18) One pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig. 15-mm diameter 18-in length Hollow, non-threaded Tapered ends for easy connection to a rod block Aluminium coated with a clear finish SHAPE MATTE BOX SWING-AWAY (AKSWA) A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a variety of wide-angle lenses. Two 4x5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4x4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. The removable swing-away module makes lens changes a snap. A spring pin helps to lock the mechanism closed without manually setting the pin. 2 magnets hold it in place when closed. Removable height adjustable rod block with one tightening knob allows micro-adjustment of height, ensuring compatibility with a wide range of lenses. The rod block can be re-installed directly on the main frame for a straight configuration. The complete kit allows three different configurations, (swing-away, straight and clip-on). Removable light carbon fiber french flag can be attached to the top to prevent flares. A series of adapter rings are included in the kit: Clamp-on adapter ring: 124-87 mm Threaded aluminium adapter rings: 87-82 mm 87-77 mm 87-72 mm 87-67 mm Fabric knicker: 124mm   SHAPE kit focus single rod follow focus 15 mm LWs (FA123) Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.  At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminum 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. At the center of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crank; All gears can be flipped to the front or back position which is helpful for compact lens configurations; Two rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera body; Swing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you're ready; A compact design takes little space, so you can still attach a matte box to the front; Use the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place.

Shape Sony FX3 Shoulder Mount

SH-FX3SM SHFX3SM SH FX3SM SH/FX3SM Shape Sony FX3 Shoulder Mount The SHAPE Shoulder Mount outfits your Sony FX3 camera with a half cage, 360° rotating handgrips, a 15mm rod system, and back and shoulder pads for the ultimate stabilization using your body's natural anchor point. The lightweight aluminum cage's numerous 1/4"-20 and 3/8"-16 threads can mount various accessories such as a secondary monitor, shotgun microphone, or wireless receiver onto the rig. An additional cold shoe and included 15mm rods provide more accessory compatibility while attaching the cage to the included grips and pads, which can be adjusted for optimal balance. SHAPE Half Cage with Wooden Handle for Sony FX3 The SHAPE Half Cage with Wooden Handle protects your Sony FX3 camera while extending its mounting capabilities with a cold shoe, seven 3/8"-16 threads, and multiple 1/4"-20 threads, enabling versatile customization of your run-and-gun setup for field applications with additional monitors or microphones. An ARRI rosette on the left side of the cage allows you to attach the included adjustable wooden handle to the rig for a more ergonomic handgrip. To ensure unencumbered operation, the cage's design maintains access to the camera's controls and ports. Attaching the factory handle of your camera is easy, thanks to the top plate's threaded ARRI hole patterns. An included HDMI protector can be secured to the camera to prevent damage to your cable or connector port. Fitting the cage to a quick release plate or DELTA adapter increases compatibility to tripods or shoulder mounts for further stabilization in the field. SHAPE Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Quick Handle Provides professional video stabilization with 2 handles Each handle offers 360° individual rotation Offers easy attachment/removal Rod Block Composed of anodized aluminum Offers composite camera support for all 15mm rods Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob With 2 screw-threaded holes, the Rod Block provides for attachment of components SHAPE Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. SHAPE Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Compatible Support Series Composite Cameleon Sumo Spider SHAPE 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps. Pair of aluminum support rods for 15mm rod clamps. 18" long rods with chamfered ends that guide the rod into an available rod clamp, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.

Shape Sony FX3 Cage 15mm LW Rod System

SH-FX3ROD SHFX3ROD SH FX3ROD SH/FX3ROD Shape Sony FX3 Cage 15mm LW Rod System CNC-milled aluminum cage specifically designed to protect and support the Sony FX3. Includes a cold shoe, ARRI rosette, seven 3/8-16 threaded mount points, and multiple ¼-20 threaded mount points. The cage design allows access to all camera controls and side outputs, as well as memory cards, battery compartment, lens release, doors, locks, and hot shoe. In addition, A detachable lock protection system to secure and hold in place your 4K FULL HDMI cable is included with the cage. Also included is a top plate with a left-hand threaded ARRI hole patterns that fits on top of Sony’s factory handle. The cage can be fitted with a quick release tripod plate or DELTA adapter.

Shape Sony FX3 Kit with Matte Box and Follow Focus

SH-FX3KIT SHFX3KIT SH FX3KIT SH/FX3KIT Shape Sony FX3 Kit with Matte Box and Follow Focus Outfit your Sony FX3 camera with quality tools for improved stability, focus, and lighting with the Matte Box and Follow Focus Kit from SHAPE. The aluminum half cage allows for access to all controls and ports of the camera and can be mounted onto the included 15mm aluminum rods. The swing-away matte box's flexible installation allows for straight, clip-on, and swing away configurations easily accommodated by the small profile of the follow focus. SHAPE Half Cage with Wooden Handle for Sony FX3 The SHAPE Half Cage with Wooden Handle protects your Sony FX3 camera while extending its mounting capabilities with a cold shoe, seven 3/8"-16 threads, and multiple 1/4"-20 threads, enabling versatile customization of your run-and-gun setup for field applications with additional monitors or microphones. An ARRI rosette on the left side of the cage allows you to attach the included adjustable wooden handle to the rig for a more ergonomic handgrip. To ensure unencumbered operation, the cage's design maintains access to the camera's controls and ports. Attaching the factory handle of your camera is easy, thanks to the top plate's threaded ARRI hole patterns. An included HDMI protector can be secured to the camera to prevent damage to your cable or connector port. Fitting the cage to a quick release plate or DELTA adapter increases compatibility to tripods or shoulder mounts for further stabilization in the field. SHAPE Swing-Away Matte Box Expand the flexibility of your camera rig and lighting setup while avoiding lens flares and keeping lights out of frame with the compact Swing-Away Matte Box from SHAPE. Adaptable installation options allow the matte box to have a straight, swing-away, or clip-on configuration, and a removable silicone shade box increases customization for the optimal setup of your rig. Its aluminum and carbon fiber construction is lightweight, and the included rod block is height adjustable by tightening the knobs, making it compatible with lenses up to 124mm in diameter. A removable carbon fiber top flag prevents flares in bright sunlight, and additional adapter rings further customize the size of the matte box's opening, ranging from 67 to 87mm. A fabric knicker secures the area where the matte box and your camera lens connect to prevent light from peeking through. Three Different Configurations Rod block can be installed directly to the main frame for straight configuration Ring-locking knob clips secure box for clip-on configuration Magnets hold the mechanism in place while enabling swing-away for easy lens switching; can be secured with spring pin Filters Two 4 x 5.6" filter trays, one rotary Easy-access handles allow for one-handed filter changes 4 x 4" filter compatibility Includes two stops at the bottom to prevent filters from falling through Adapter Rings 87 to 67mm 87 to 72mm 87 to 77mm 87 to 82mm 124 to 87mm SHAPE Follow Focus Kit with Single 15mm Rod Clamp Use the compact SHAPE Follow Focus Kit with Single 15mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens. At the core of the kit is a rubber, anti-slip follow focus wheel attached to a single aluminum 15mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. Modular design allows for addition and removal of components without tools or screws. Its compact size allows it to fit easily with lens accessories like a matte box. The rubber follow focus wheel is attached to an adjustable, aluminum 15mm rod clamp which can swing away when changing lenses. The focus wheel fits most lens sizes. Five drive gears are included: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. A rubber friction wheel is included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. An 11" whip and a speed crank are included. Each connects to the focus wheel for fine adjustments. Four magnetic marking disks are included to attach to the focus wheel. SHAPE 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Telescopic SHAPE black handle Arri rosette cuff kit

SH-CUFKIT SHCUFKIT SH CUFKIT SH/CUFKIT Shape Telescopic SHAPE black handle Arri rosette cuff kit With the Shape Telescopic Black Handle Arri Rosette Cuff Kit, not only can you switch between 15 to 19 mm LWS or Studio – there is no need to remove your accessories to do it. Connect the Arri Rosette Handles to the rod block, clip the rod block onto your rig, and you’re good to go. Case included. Use the screwdriver included in the Cuff Kit to shorten the Telescopic Handles to 3”. When you’re short on space, it makes all the difference. Since our Handles offer 360 degrees of adjustment, you can clip the cuff kit above or below the rods – make it comfortable! 15 mm LWS cuff rod block Arri rosette (CUF15) The SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm lightweight rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. 15 mm studio spacing cuff rod block Arri rosette (CUFST) The SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm studio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. 19 mm studio cuff rod block Arri rosette (CUF19) The SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 19 mm studio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. Telescopic SHAPE black handle Arri rosette (HAND12SHADOW) Left and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

Shape Sony FX6 Controller Top Handle

SH-CTRLF6 SHCTRLF6 SH CTRLF6 SH/CTRLF6 Shape Sony FX6 Controller Top Handle SHAPE CTRLF6 Controller Top Handle for Sony FX6 Add a variety of accessories to your camera rig with the Sony FX6 top handle controller designed with universal attachment System. The modular handle features 2 sections that can be removed or re-added to create different lengths and configurations. One of the sections is angled to create a handgrip on the end. The first section is equipped with a SHAPE Push-Button System, which allows to raise or lower the top handle in a single push. The handle is machined from anodized aluminium, and each section is lined with a smooth, wooden finger grip made from Canadian maple. Numerous 3/8″-16 ARRI-style anti-twist accessory threads line the handle, so you can add a wide variety of accessories.

Shape Canon C70 Cage with Top Handle

SH-C70THC SHC70THC SH C70THC SH/C70THC Shape Canon C70 Cage with Top Handle SHAPE C70THC Canon C70 Cage, Top Handle The L-shaped handle features a solid connection to your top plate using mounting screws. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. The handle is constructed from anodized aluminium and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8″-16 ARRI-style anti-twist accessory threads. The front section of the handle features a cold shoe designed to receive a spring-loaded cold shoe foot. This spring-loaded cold shoe foot is designed with a tilting mount bracket with 1/4″-20 threaded screw to mount accessories like a monitor, a video light, or a microphone weighing up to 4.4 lb. Moreover, each end is secured with a knurled locking knob. Once the accessory is mounted, you can tilt it forward or backwards and place it at the desired angle. The position is lockable with the included Allen key.

Shape Canon C70 Shoulder Mount

SH-C70SM SHC70SM SH/C70SM SH C70SM SHAPE C70SM Canon C70 Shoulder Mount The 15 mm LW Baseplate system is designed to match the CANON C70 optical center. The two pieces base plate features an adapter plate and a 15 mm lws rod base. Strongly mounted with two 1/4-20 screws. The 15 mm LW baseplate comes with a pair of 15 mm rods 12” and the bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included. 01 Hand5 Shape 01 Product PictureThe SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminium rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently. The back pad (PAD1) features a powder-coated anodized aluminium plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attached or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights. Pair of 15 mm rods 18" long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminium tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.

Shape Canon C70 Cage with 15mm LW Rod System

SH-C70ROD SHC70ROD SH C70ROD SH/C70ROD Shape Canon C70 Cage with 15mm LW Rod System SHAPE C70ROD Canon C70 Cage 15mm LW Rod System Add accessories and handheld functionality to your Canon C70 camera with this kit made of CNC aluminium. It includes a form-fitting side plate, a top plate and the adaptor plate connecting together with the side post to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the factory Canon C70 top handle. A Cold Shoe offset fit perfectly the native microphones bracket of the camera. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included. The bottom of the plate features several 1/4″-20 and 3/8″-16 holes for mounting and balancing your camera on equipment like a tripod. Add accessories and handheld functionality to your Canon C70 camera with this kit made of CNC aluminium. It includes a form fitting side plate, a top plate and the adaptor plate connecting together with the side post to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with ARRI standard anti rotating holes. The top plate is also designed to fit the factory Canon C70 top handle. An offset Cold Shoe fits perfectly the native microphones bracket of the camera. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included. The bottom of the plate features several 1/4″-20 and 3/8″-16 holes for mounting and balancing your camera on equipment like a tripod. The 15 mm LW Baseplate system is designed to match the CANON C70 optical center. The two pieces base plate features an adapter plate and a 15 mm lws rod base. Strongly mounted with two 1/4-20 screws. The 15 mm LW baseplate comes with a pair of 15 mm rods 12” and the bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included. This pair of SHAPE 15 mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

Shape Canon C70 Camera Cage

SH-C70CAGE SH C70CAGE SHC70CAGE SH/C70CAGE Shape Canon C70 Camera Cage Add accessories and handheld functionality to your Canon C70 camera with this kit made of CNC aluminium. It includes a form-fitting side plate, a top plate and the adaptor plate connecting together with the side post to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with ARRI standard anti rotating holes. The top plate is also designed to fit the factory Canon C70 top handle. An offset Cold Shoe fits perfectly the native microphones bracket of the camera. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included. The bottom of the plate features several 1/4″-20 and 3/8″-16 holes for mounting and balancing your camera on equipment like a tripod.  

Shape Canon C70 Baseplate and Cage with Handles

SH-C70BR SHC70BR SH C70BR SH/C70BR Shape Canon C70 Baseplate and Cage with Handles SHAPE C70BR Canon C70 Baseplate, Cage with Handles The L-shaped handle features a solid connection to your top plate using mounting screws. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. The handle is constructed from anodized aluminium and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8″-16 ARRI-style anti-twist accessory threads. The front section of the handle features a cold shoe designed to receive a spring-loaded cold shoe foot. This spring-loaded cold shoe foot is designed with a tilting mount bracket with 1/4″-20 threaded screw to mount accessories like a monitor, a video light, or a microphone weighing up to 4.4 lb. Moreover, each end is secured with a knurled locking knob. Once the accessory is mounted, you can tilt it forward or backward and place it at the desired angle. The position is lockable with the included Allen key. Add accessories and handheld functionality to your Canon C70 camera with this kit made of CNC aluminium. It includes a form fitting side plate, a top plate and the adaptor plate connecting together with the side post to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with ARRI standard anti rotating holes. The top plate is also designed to fit the factory Canon C70 top handle. An offset Cold Shoe fits perfectly the native microphones bracket of the camera. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included. The bottom of the plate features several 1/4″-20 and 3/8″-16 holes for mounting and balancing your camera on equipment like a tripod. The compact REVOLT shoulder baseplate (BP20) is a lighter version of the REVOLT VCT universal baseplate (BP10). The main differences is that the BP20 is not designed with the front-to-back sliding plate and there is a bracket system with magnet allowing you to swivel the baseplate to the left for an easy access to the camera screws. It is designed with 2 standard Arri rosettes for handles mount and there is also a standard quick release adapter plate compatible with most VCT tripod plate. There is also a protective rubber pads on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated tool box to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key. Left and right Arri Rosettes handgrips that can be attached to cameras or camera support hardware that has standard Arri rosettes. Each arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arms for your comfort. The arms attach to your camera or support via an Arri compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. Each arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its Push-button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. This pair of SHAPE 15 mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish. Pair of 15 mm rods 8" long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminium tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.

Shape Canon C500 Mark II/C300 Mark III Push-button viewfinder mount

SH-C52VF SHC52VF SH C52VF SH/C52VF Shape Canon C500 Mark II/C300 Mark III Push-button viewfinder mount The SHAPE Push-Button Viewfinder Mount for Canon C500 Mark II mounts onto the SHAPE Top Handle that comes in a variety of SHAPE kits (not included). It provides you with a 15mm mounting rod, for side-to-side adjustment, and a push-button articulation point that turns your viewfinder into a horizontal flip-out viewfinder. The Viewfinder Mount also incorporates two additional points of push-button 360° articulation and a squared rod with spring-loaded locking lever that work in conjunction to adjust the height and orientation of your viewfinder, allowing you to place the viewfinder just where you need it.

Shape Canon C500 Mark II/C300 Mark III cage and top handle

SH-C52THC SH C52THC SH/C52THC SHC52THC Shape Canon C500 Mark II/C300 Mark III cage and top handle Shape Canon C500 Mark II, C300 Mark III Cage And Top Handle Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this rig kit from SHAPE. It includes a form fitting cage with Arri rosette and a top handle with several threaded holes. The bottom plate of the cage attaches to the rear of the camera to support it on the baseplate. Canon C500 Mark II, C300 Mark III camera cage (C52CAGE) Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this kit made of CNC aluminium. It includes a form fitting side plate with Arri rosette , a top plate and a rear insert plate connecting together to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the native Canon EOS C500 Mark II handle. Canon C500 Mark II, C300 Mark III top plate (C52TP) Lightweight and robust CNC machined aluminum top plate designed to fit with the native Canon EOS C500 Mark II top handle. The top plate offers 1/4-20 and 3/8-16 threads with Arri standard anti rotating holes, which can be used to attach options around the camera. The top plate comes with a 3/16’’ Hex wrenche and (4) captive screws ¼-20 3/8 to attach the top plate to the camera Top side: (8) ¼-20 and (2) 3/8-16 threaded holes with Arri anti rotating holes Top side: (18) ¼-20 threaded holes Sides: (10) ¼-20 threaded holes with Arri anti rotating holes Canon C500 Mark II, C300 Mark III adapter plate (C52AP) The Canon EOS C500 Mark II Adapter Plate let you quickly attach your camera to your rig. The position of the captive screws perfectly matches the threaded holes of the Canon EOS C500 Mark II camera base

Shape Canon C500 Mark II/C300 Mark III shoulder mount

SH-C52SM SHC52SM SH C52SM SH/C52SM Shape Canon C500 Mark II/C300 Mark III shoulder mount Professional video stabilization with 2 handles featuring quick release handgrips with SHAPE’s patented Push-button technology. Canon C500 Mark II, C300 Mark III 15mm lightweight baseplate (B15C52) The lightweight baseplate with 15 mm rod system is designed to match the Canon EOS C500 Mark II optical center. It features two attachment points (1/4-20 and 3/8-16) for securely mounting the Canon EOS C500 Mark II body. The baseplate also comes with a pair of 15 mm rods that are 12” long through the length of the baseplate. The bottom of the plate feature several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. Canon C500 Mark II, C300 Mark III adapter plate (C52AP) The Canon EOS C500 Mark II Adapter Plate let you quickly attach your camera to your rig. The position of the captive screws perfectly matches the threaded holes of the Canon EOS C500 Mark II camera base. Quick handle rod bloc (HAND5) The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. Composite mini shoulder pad (SHPAD3) The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently. Back pad (PAD1) The back pad (PAD1) features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights. 15 mm 18 in rods (15TUBE18) One pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig. 15-mm diameter 18-in length Hollow, non-threaded Tapered ends for easy connection to a rod block Aluminum coated with a clear finish

Shape Canon C500 Mark II/C300 Mark III remote extension handle with cable

SH-C52RH SHC52RH SH C52RH SH/C52RH Shape Canon C500 Mark II/C300 Mark III remote extension handle with cable SHAPE C52RH (C52-RH) Canon C500 Mark II, Canon C300 Mark III Remote Extension Handle with Cable. The Canon EOS C500 Mark II remote extension handle from SHAPE offers an adjustable arm extension (2 inches) for the side hand grip provided with the Canon EOS C500 Mark II. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm. It is designed with Arri rosettes to mount on the camera or baseplate with standard ARRI rosettes. It also features SHAPE’s patented Push-Button technology for easy angle adjustment and 360-degree rotation. SHAPE is well known for its patented Push-button system, now used by so many professionals in the industry. The technology was developped to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the remote extension handle in the best position for your use. Push, adjust, release, and then its lock.

Shape Canon C500 Mark II/C300 Mark III offset rig

SH-C52-OFF SHC52OFF SH C52 OFF SH/C52/OFF Shape Canon C500 Mark II/C300 Mark III offset rig Shape Canon C500 Mark II, C300 Mark III Offset Rig Professional video stabilization with 2 handles and an offset configuration featuring quick release handgrips with SHAPE’s patented Push-button technology. Canon C500 Mark II, C300 Mark III 15mm lightweight baseplate (B15C52) The lightweight baseplate with 15 mm rod system is designed to match the Canon EOS C500 Mark II optical center. It features two attachment points (1/4-20 and 3/8-16) for securely mounting the Canon EOS C500 Mark II body. The baseplate also comes with a pair of 15 mm rods that are 12” long through the length of the baseplate. The bottom of the plate feature several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. Canon C500 Mark II, C300 Mark III adapter plate (C52AP) The Canon EOS C500 Mark II Adapter Plate let you quickly attach your camera to your rig. The position of the captive screws perfectly matches the threaded holes of the Canon EOS C500 Mark II camera base. Offset rail 15 mm 2-rod bloc (BMOFBRAC) The SHAPE 15 mm Off-Set Bracket is designed to fit offset configuration and let you insert 15 mm rods. Quick handle rod bloc (HAND5) The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminium rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. Composite mini shoulder pad (SHPAD3) The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently. Back pad (PAD1) The back pad (PAD1) features a powder coated anodized aluminium plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights. 15 mm 12" rods (15TUBE12) This pair of SHAPE 15 mm Aluminium Rods (12") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish. 15 mm 10" rods (15TUBE10) This pair of SHAPE 15 mm Aluminium Rods (10") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

Shape C500 Mark II/C300 Mark3 baseplate w/cage/top handle/long VF/4x5.6 matte box/follow focus pro

SH-C52KIT SHC52KIT SH C52KIT SH/C52KIT Shape C500 Mark II/C300 Mark3 baseplate w/cage/top handle/long VF/4x5.6 matte box/follow focus pro Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this Pro Shoulder Rig Kit from SHAPE. This extensive kit includes a shoulder mount baseplate with 15mm rod system, a form fitting cage with Arri rosette , a rosette handle with black push-button, a viewfinder rod clamp with 19 mm push-button, a modular top handle, a 4 x 5.6″ matte box, and a follow focus pro. The baseplate includes an integrated shoulder mount that allows you to convert your tripod-mounted camera into a handheld shoulder rig. The bottom of the cage attaches to the rear of the camera to support it on the baseplate. The 15mm rods allow you to mount additional accessories, as well as the 4 x 5.6″ matte box and the follow focus pro. The push-button handle attaches to the baseplate and can rotate using the rosette joints for the most comfortable position. The modular top handle can be adjusted to be longer or shorter for your preference, and the viewfinder rod clamp with 19 mm Push-button attaches to the front of the top handle.

Shape Canon C500 Mark II/C300 Mark III cage and handle with EVF mount

SH-C52EVFC SHC52EVFC SH C52EVFC SH/C52EVFC Shape Canon C500 Mark II/C300 Mark III cage and handle with EVF mount SHAPE C52EVFC (C52-EVFC) Canon C500 Mark II Cage and Handle with Push-Button Viewfinder Mount. Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this rig kit from SHAPE. It includes a baseplate and top plate with 15mm rod system, a form fitting cage with Arri rosette, a top handle with several threaded holes, and a viewfinder rod clamp with 19mm push-button. The baseplate match the Canon EOS C500 Mark II optical centre and can also be tripod-mounted. The 15mm 12” and 4” rods allow you to mount additional accessories. Canon C500 Mark II camera cage (C52CAGE) Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this kit made of CNC aluminium. It includes a form fitting side plate with Arri rosette, a top plate and a rear insert plate connecting together to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate...

Shape Canon C500 Mark II/C300 Mark III camera cage

SH-C52CAGE SHC52CAGE SH C52CAGE SH/C52CAGE Shape Canon C500 Mark II/C300 Mark III camera cage Shape Canon C500 Mark II, C300 Mark III Camera Cage Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this kit made of CNC aluminium. It includes a form fitting side plate with Arri rosette , a top plate and a rear insert plate connecting together to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the native Canon EOS C500 Mark II handle. 15 mm 4" rods (15TUBE4) This pair of SHAPE 15 mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

Shape Canon C500 Mark II/C300 Mark III baseplate with tape plate and handle

SH-C52BT SHC52BT SH C52BT SH/C52BT Shape Canon C500 Mark II/C300 Mark III baseplate with tape plate and handle Shape Canon C500 Mark II, C300 Mark III Camera Cage, Baseplate with Handle Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this Pro Shoulder Rig Kit from SHAPE. This kit includes a shoulder mount baseplate with 15mm rod system, a form fitting cage with Arri rosette and a rosette handle with black push-button. The baseplate includes an integrated shoulder mount that allows you to convert your tripod-mounted camera into a handheld shoulder rig. The bottom of the cage attaches to the rear of the camera to support it on the baseplate. The 15mm rods allow you to mount additional accessories like a matte box and follow focus. The push-button handle attaches to the baseplate and can rotate using the rosette joints for the most comfortable position. Canon C500 Mark II, C300 Mark III V-lock quick release baseplate (C52BP) Compact REVOLT shoulder baseplate (BP20) The compact REVOLT shoulder baseplate (BP20) is a lighter version of the REVOLT VCT universal baseplate (BP10). The main differences is that the BP20 is not designed with the front-to-back sliding plate and there is a bracket system with magnet allowing you to swivel the baseplate to the left for an easy access to the camera screws. It is designed with 2 standard Arri rosettes for handles mount and there is also a standard quick release adapter plate compatible with most VCT tripod plate. There is also a protective rubber pads on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated tool box to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key. 15 mm 4" rods (15TUBE4) This pair of SHAPE 15 mm Aluminium Rods (4″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish. 15 mm 8" rods (15TUBE8) Pair of 15 mm rods 8″ long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminium tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn’t perfectly aligned or is at a slight angle to the rod clamp. Canon C500 Mark II, C300 Mark III top plate (C52TP) Lightweight and robust CNC machined aluminium top plate designed to fit with the native Canon EOS C500 Mark II top handle. The top plate offers 1/4-20 and 3/8-16 threads with Arri standard anti rotating holes, which can be used to attach options around the camera. The top plate comes with a 3/16’’ Hex wrench and (4) captive screws ¼-20 3/8 to attach the top plate to the camera Top side: (8) ¼-20 and (2) 3/8-16 threaded holes with Arri anti rotating holes Top side: (18) ¼-20 threaded holes Sides: (10) ¼-20 threaded holes with Arri anti rotating holes Canon C500 Mark II, C300 Mark III camera cage (C52CAGE) Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this kit made of CNC aluminium. It includes a form fitting side plate with Arri rosette , a top plate and a rear insert plate connecting together to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the native Canon EOS C500 Mark II handle. Double Quick Handle ARRI Rosette Single Shadow (HAND2S) Left or right ARRI Rosettes handgrips that can be attached to cameras or camera support hardware that has standard ARRI rosettes. The arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arm for your comfort. The arm attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. The arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

Shape Canon C500 Mark II/C300 Mark III camera cage with baseplate and handle

SH-C52BR SH/C52BR SH C52BR SHC52BR Shape Canon C500 Mark II/C300 Mark III camera cage with baseplate and handle Shape Canon C500 Mark II, C300 Mark III Camera Cage, Baseplate with Handle Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this Pro Shoulder Rig Kit from SHAPE. This kit includes a shoulder mount baseplate with 15mm rod system, a form fitting cage with Arri rosette and a rosette handle with black push-button. The baseplate includes an integrated shoulder mount that allows you to convert your tripod-mounted camera into a handheld shoulder rig. The bottom of the cage attaches to the rear of the camera to support it on the baseplate. The 15mm rods allow you to mount additional accessories like a matte box and follow focus. The push-button handle attaches to the baseplate and can rotate using the rosette joints for the most comfortable position. Canon C500 Mark II, C300 Mark III V-lock quick release baseplate (C52BP) Compact REVOLT shoulder baseplate (BP20) The compact REVOLT shoulder baseplate (BP20) is a lighter version of the REVOLT VCT universal baseplate (BP10). The main differences is that the BP20 is not designed with the front-to-back sliding plate and there is a bracket system with magnet allowing you to swivel the baseplate to the left for an easy access to the camera screws. It is designed with 2 standard Arri rosettes for handles mount and there is also a standard quick release adapter plate compatible with most VCT tripod plate. There is also a protective rubber pads on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated tool box to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key. 15 mm 4" rods (15TUBE4) This pair of SHAPE 15 mm Aluminium Rods (4″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish. 15 mm 8" rods (15TUBE8) Pair of 15 mm rods 8″ long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminium tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn’t perfectly aligned or is at a slight angle to the rod clamp. Canon C500 Mark II, C300 Mark III top plate (C52TP) Lightweight and robust CNC machined aluminium top plate designed to fit with the native Canon EOS C500 Mark II top handle. The top plate offers 1/4-20 and 3/8-16 threads with Arri standard anti rotating holes, which can be used to attach options around the camera. The top plate comes with a 3/16’’ Hex wrench and (4) captive screws ¼-20 3/8 to attach the top plate to the camera Top side: (8) ¼-20 and (2) 3/8-16 threaded holes with Arri anti rotating holes Top side: (18) ¼-20 threaded holes Sides: (10) ¼-20 threaded holes with Arri anti rotating holes Canon C500 Mark II, C300 Mark III camera cage (C52CAGE) Add accessories and handheld functionality to your Canon EOS C500 Mark II camera with this kit made of CNC aluminium. It includes a form fitting side plate with Arri rosette , a top plate and a rear insert plate connecting together to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the native Canon EOS C500 Mark II handle. Double Quick Handle ARRI Rosette Single Shadow (HAND2S) Left or right ARRI Rosettes handgrips that can be attached to cameras or camera support hardware that has standard ARRI rosettes. The arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arm for your comfort. The arm attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. The arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

Shape 7000 v-lock quick release baseplate (BP0008) tripod plate and double quick handle rosette

SH-BP7000 SH-BP7000 SH-BP7000 SH-BP7000 SHAPE 7000 v-lock quick release baseplate (BP0008) tripod plate and double quick handle rosette V-Lock Quick-Release Baseplate Kit for Sony F5/F55 Cameras The SHAPE BP7000 V-Lock Quick-Release Baseplate Kit includes the BP7000 V-Lock Quick-Release Baseplate, Panasonic SHAN-TM700 Quick-Release Tripod Adapter, and Top Handle Kit for Sony F5/F55 Camera. This kit provides a mounting solution for Cine Alta 4K cameras including the Sony PMW-F5 and PMW-F55 cameras. The SHAPE BP7000 BASE PLATE offers a unique design created for professional cameras like the Sony F5, Sony F55, Canon C300, the RED series,Sony EX1, EX3, the Panasonic AF100/101, P2 and many other camera models with interchangeable lenses. The SHAPE BP7000 BASE PLATE should be used with cameras featuring electronic viewfinders or external monitors. Made of solid anodized aluminum, the SHAPE BP7000 is a perfect fit for Panasonic and Sony camera plates with its V-lock delta adapter at the bottom.

Shape Compact REVOLT shoulder baseplate (BP20) with follow focus HAND15 shadow and matte box kit

SH-BP25 SHBP25 SH BP25 SH/BP25 Shape Compact REVOLT shoulder baseplate (BP20) with follow focus HAND15 shadow and matte box kit Shape Compact Revolt Shoulder Base Plate Kit Compact REVOLT shoulder baseplate (BP20) The compact REVOLT shoulder baseplate (BP20) is a lighter version of the REVOLT VCT universal baseplate (BP10). The main differences is that the BP20 is not designed with the front-to-back sliding plate and there is a bracket system with magnet allowing you to swivel the baseplate to the left for an easy access to the camera screws It is designed with 2 standard Arri rosettes for handles mount and there is also a standard quick release adapter plate compatible with most VCT tripod plate. There is also a protective rubber pads on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. It comes with 2 pairs of 15 mm rods (8”and 4”) made of reliable aluminium coated with a clear finish. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated tool box to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key. Made of CNC Machined Aluminium Match your camera’s optical center Bracket system with magnet let you swivel the baseplate Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet knob Come with 2 pairs of 15 mm rods (8”, 4”) Designed with 2 standard Arri rosettes for handles mount Comfortable shoulder pad made of slip-free material Sophisticated tool box to store your extra screws and Allen key Quick release adapter plate for VCT tripod plate mount Compatible with the Following Cameras Arri (Amira and Alexa Mini) Sony (FS7, FS7M2, F5, F55, EX1, EX3) Canon (C200, C300, C300M2, C700) Panasonic (EVA1, Cinema Varicam LT 4k S35, Panasonic Ag-af100, Panasonic Ag-af101 Varicam LT, Panasonic P2) Blackmagic (Ursa Mini) Many other camera models with interchangeable lenses Compact quick handle Arri rosette with black Push-button system (HAND15) Left and right Arri Rosettes handgrips that can be attached to cameras or camera support hardware that has standard Arri rosettes. Each arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arms for your comfort. The arms attach to your camera or support via an Arri compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. Each arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its Push-button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. Quick release handgrips with multiple points of adjustment Black Push-button (HAND15 SHADOW) Compatible with Arri Rosettes Patented Push-button technology Push, adjust, release, and then its lock Rubber handgrips for stability and precision Stainless steel locking mechanism for durability ¼-20 and 3/8-16 threaded holes with locking stoppers CNC machined aluminium Follow Focus Kit with Single 15 mm Rod Clamp (FA123) Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens. At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminium 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it’s tightened by a locking lever. The clamp’s rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11″ whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. At the centre of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crank All gears can be flipped to the front or back position which is helpful for compact lens configurations Two rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera body; Swing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you’re ready A compact design takes little space, so you can still attach a matte box to the front Use the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place. Designed for Compact Cameras Allows addition and removal of components without tools or screws Follow Focus Wheel with Crank and Whip Single 15 mm Rod Clamp, Swing Arm Design 5 x Drive Gears Included, 1:1 Gear Ratio 4 x Magnetic Marking Disks Anti-Slip Rubber Focus Knob Compatible with Most Lenses Aluminium Construction 2-Stage 4 x 5.6″ Matte Box (MAT4X56) The 2-Stage 4 x 5.6″ matte box from SHAPE can be used as a clip-on matte box and can be mounted on industry-standard 15 mm rod system. It is designed for light control, insertion, and adjustment of filters. It features a two-stage rotating 4 x 5.6″ filter holder. The matte box accepts lenses with a front diameter up to 114 mm. It comes with a 82 mm filter ring and six step-up rings that allow you to fit lenses with an outer diameter (52-82, 58-82, 62-82, 67-82, 72-82, 77-82)mm. Matte box 2 stage bracket for 4 x 5.6″ rotary filters Compatible with photo lenses with a minimum diameter of 52 mm Compatible with professional video optics with up to 114 mm front diameter (2) Filter holder (2) Clip on adapter rings (84 and 114 mm) to attach your lens to the matte box (1) 82 mm filter ring (6) Step-up rings (52-82, 58-82, 62-82, 67-82, 72-82, 77-82)mm (2) Side flags and (1) French flag for maximum control of the light incident 15 mm rod-to-mattebox bracket

Shape Compact REVOLT shoulder baseplate (BP20) with HAND15 shadow

SH-BP22 SH-BP22 SH-BP22 SH-BP22 Shape Compact REVOLT shoulder baseplate (BP20) with HAND15 shadow Shape SH-BP22 Compact Revolt Shoulder Baseplate with Hand15 Shadow The BP20 is a lighter version of the REVOLT VCT UNIVERSAL BASEPLATE (BP10). The main differences are that the BP20 is not designed with the front-to-back sliding plate and it will give you less latitude to adjust the height of your rod bloc. It still offers a unique design and is crafted for both amateur and professional filmmakers seeking high quality universal baseplate. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The shoulder pad produces maximum comfort and stability; thanks to its soft, ergonomic and thick shoulder pad made of gel padding and slip-free material. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored. There is also a magnet at the back to attach your Allen key. The baseplate is compatible with the following cameras: Arri (Amira and Alexa Mini), Sony (FS7, FS7M2, F5, F55, EX1, EX3), Canon (C200, C300, C300M2, C700), Panasonic (EVA1, Cinema Varicam LT 4k S35, Panasonic Ag-af100, Panasonic Ag-af101 Varicam LT, Panasonic P2), Blackmagic (Ursa Mini) and many other camera models with interchangeable lenses. Compact quick handle Arri rosette with black Push-button system (HAND15 SHADOW) Left and right ARRI Rosettes handgrips that can be attached to cameras or camera support hardware that has standard ARRI rosettes. Each arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arms for your comfort. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. Each arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its Push-button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.Shape SH-BP22 Compact Revolt Shoulder Baseplate with Hand15 Shadow The BP20 is a lighter version of the REVOLT VCT UNIVERSAL BASEPLATE (BP10). The main differences are that the BP20 is not designed with the front-to-back sliding plate and it will give you less latitude to adjust the height of your rod bloc. It still offers a unique design and is crafted for both amateur and professional filmmakers seeking high quality universal baseplate. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The shoulder pad produces maximum comfort and stability; thanks to its soft, ergonomic and thick shoulder pad made of gel padding and slip-free material. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored. There is also a magnet at the back to attach your Allen key. The baseplate is compatible with the following cameras: Arri (Amira and Alexa Mini), Sony (FS7, FS7M2, F5, F55, EX1, EX3), Canon (C200, C300, C300M2, C700), Panasonic (EVA1, Cinema Varicam LT 4k S35, Panasonic Ag-af100, Panasonic Ag-af101 Varicam LT, Panasonic P2), Blackmagic (Ursa Mini) and many other camera models with interchangeable lenses. Compact quick handle Arri rosette with black Push-button system (HAND15 SHADOW) Left and right ARRI Rosettes handgrips that can be attached to cameras or camera support hardware that has standard ARRI rosettes. Each arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing you to adjust the arms for your comfort. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. Each arm is also designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers for additional mounting options and to strongly secure the camera accessories in position. SHAPE is well known for its Push-button handle, now used by so many professionals in the industry. We developed this patented technology to give users quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

Shape Compact REVOLT shoulder baseplate

SH-BP20 SHBP20 SH BP20 SH/BP20 Shape Compact REVOLT shoulder baseplate Shape Compact Revolt Shoulder Baseplate The compact REVOLT shoulder baseplate (BP20) is a lighter version of the REVOLT VCT universal baseplate (BP10). The main differences is that the BP20 is not designed with the front-to-back sliding plate and there is a bracket system with magnet allowing you to swivel the baseplate to the left for an easy access to the camera screws. It is designed with 2 standard Arri rosettes for handles mount and there is also a standard quick release adapter plate compatible with most VCT tripod plate. There is also a protective rubber pads on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. It comes with 2 pairs of 15 mm rods (8”and 4”) made of reliable aluminium coated with a clear finish. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated tool box to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key. Made of CNC Machined Aluminium Bracket system with magnet let you swivel the baseplate Match your camera’s optical centre Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet knob Come with 2 pairs of 15 mm rods (8”, 4”) Designed with 2 standard Arri rosettes for handles mount Comfortable shoulder pad made of slip-free material Sophisticated tool box to store your extra screws and Allen key Quick release adapter plate for VCT tripod plate mount Compatible with the following cameras Arri (Amira and Alexa Mini) Sony (FS7, FS7M2, F5, F55, EX1, EX3) Canon (C200, C300, C300M2, C700) Panasonic (EVA1, Cinema Varicam LT 4k S35, Panasonic Ag-af100, Panasonic Ag-af101 Varicam LT, Panasonic P2) Blackmagic (Ursa Mini) Many other camera models with interchangeable lenses

Shape 15mm LW to 15mm studio snap-on adapter

SH-BL15A SHBL15A SH BL15A SH/BL15A Shape 15mm LW to 15mm studio snap-on adapter SHAPE BL15A (BL-15-A) 15mm LW to 15mm Studio Snap-On Adapter. Designed to adapt 15mm lightweight accessories to 15mm studio spaced rods. Comes with a 15mm Studio offset Rod Clamp and a 15mm lightweight adapter spaced rods. 100 mm spacing Snap-On design, enabling you to attach the support Snaps onto 15mm studio rods without having to remove other rod-mounted accessories. 15mm rod posts for attaching LW 15mm accessories (FFPRO). Left side of the clamp designed with 1x Anti-Twist 3/8inch-16 accessory mounts. Made with a durable CNC Machined Aluminium and stainless-steel construction.

Shape Red Komodo 15mm Lightweight Baseplate

SH-B15KOMO SHB15KOMO SH B15KOMO SH/B15KOMO SHAPE RED KOMODO 15mm Lightweight Baseplate SHAPE B15KOMO 15mm Lightweight Baseplate for RED KOMODO The 15 mm LW Baseplate system is designed to match the RED KOMODO optical center with or without the expander module. It features an adapter plate, a dovetail spacer with Arri rosette mounts and a 15 mm LW baseplate. Strongly mount the dovetail plate at the bottom of your camera body with 1/4-20 and 3/8-16 screws. The dovetail plate slides into the dovetail spacer which is mount to the 15 mm LW baseplate. Simply slide out from your dovetail spacer and slide it back into your ronin 2 gimbal system without having to screw or unscrew any plates. The dovetail spacer can receive SHAPE Arri rosette on both sides and features 3/8″-16, ARRI-style anti-twist threads to mount accessories. The 15 mm LW baseplate comes with a pair of 15 mm rods 12” and the bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod.

Shape Sony FX9 15mm lightweight baseplate

SH-B15FX9 SHB15FX9 SH B15FX9 SH/B15FX9 SHAPE Sony FX9 15mm lightweight baseplate Shape Sony FX9 15mm Lightweight Baseplate This 15mm Lightweight Baseplate from SHAPE is designed to support the Sony PXW-FX9 camera. The aluminium baseplate features 1/4"-20 and 3/8"-16 screws to secure your camera to the plate, and there are mounting holes underneath to mount the baseplate on a plate or tripod. The baseplate includes a pair of 12" 15mm rods that insert through the length of the baseplate and are secured with a locking thumbscrew. There are rubber pads on the top of the plate to protect your camera from scratches and prevent twisting.  

Shape Sony FX6 15mm Base

SH-B15FX6 SH B15FX6 SHB15FX6 SH/B15FX6 Shape Sony FX6 15mm Base SHAPE B15FX6 15mm Lightweight Baseplate for Sony FX6 The lightweight baseplate with 15 mm rod system is designed to match the SONY FX6 optical center. It features two attachment points (1/4-20 and 3/8-16) for securely mounting the Sony FX6 body. The baseplate also comes with a pair of 15 mm rods that are 12” long through the length of the baseplate. The bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod.  

Shape Canon C70 15mm Base

SH-B15C70 SHB15C70 SH B15C70 SH/B15C70 SHAPE Canon C70 15mm Base The 15 mm LW Baseplate system is designed to match the CANON C70 optical center. The two pieces base plate features an adapter plate and a 15 mm lws rod base. Strongly mounted with two 1/4-20 screws. The 15 mm LW baseplate comes with a pair of 15 mm rods 12” and the bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included. This pair of SHAPE 15 mm Aluminium Rods (12") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Sony a7S III Cage with Top Handle

SH-A7S3THC SHA7S3THC SH A7S3THC SH/A7S3THC Shape Sony a7S III Cage with Top Handle Shape Sony A7S3 Cage With Top Handle Sony A7S3 Cage  Made from CNC-machined aluminium, the cage is specially designed for the Sony Alpha a7S III. The camera is strongly mounted to the cage using a 1/4-20 screw and an Allen key. The cage is designed with the following mounting options: (1) cold shoe, several 1/4-20 threaded holes and (7) 3/8"-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 3 left cables as well as your 4K FULL HDMI cable is included with the cage. The bottom of the cage has (2) 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. A DELTA adapter can be added to mount on 15 LWS baseplate, (not included). an ARRI rosette can be added on the right side to mount compatible accessories. Aluminimum Top Handle Made of CNC aluminium Designed with a 15 mm rod holder secured by a ratchet knob Strongly attach to the cage with (1) 3/8-16 screw with anti-rotating locking pins Cold shoe attachment x 4 3/8-16 threaded hole with anti-rotating locking pins x 1 3/8-16 threaded holes x 4 ¼-20 threaded holes x 9

Shape Sony a7S III Shoulder Mount

SH-A7S3SM SHA7S3SM SH A7S3SM SH/A7S3SM Shape Sony a7S III Shoulder Mount Sony A7SIII Shoulder Mount Sony Alpha a7S III cage Made from CNC-machined aluminium, the cage is specially designed for the Sony Alpha a7S III. The camera is strongly mounted to the cage using a 1/4-20 screw and an Allen key. The cage is designed with the following mounting options: (1) cold shoe, several 1/4-20 threaded holes and (7) 3/8"-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 3 left cables as well as your 4K FULL HDMI cable is included with the cage. The bottom of the cage has (2) 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. A DELTA adapter (included in this package) can be added to mount on 15 LWS baseplate, an ARRI rosette can be added on the right side to mount compatible accessories. Wooden Push-Button Top Handle The ergonomic and easily removable SHAPE Top Handle was designed to provide the required space for mounting your Audio Unit. It offers a comfortable and secure wooden grip for carrying your camera and securing accessories. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its locked. This nicely crafted Push-Button Top Handle provides multiple mounting options, including ARRI Standard 3/8″-16 anti-rotating hole patterns on the top, SHAPE Standard 1/4″-20 anti-rotating hole patterns on the top and side, cold shoe mounts, and a 3/8″-16 UNC threaded hole at the front. The SHAPE Rod Clamp at the front (15CTH) can be added, allowing you to directly mount a 15 mm rod onto the handle. Made of CNC Aluminium, the 15 mm LW Clamp (15CTH) can be easily attached to the top Handle. The clamp is designed to support a 15 mm rod such as the SHAPE REVOLT EVF Mount Bracket. The ratchet knob clamp lets you adjust and strongly fix the position of the 15 mm rod to the SHAPE Top Handle and (2) cold shoe mounts, one at the front of the handle and one at the back. Quick handle rod bloc (HAND5) The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. Composite mini shoulder pad (SHPAD3) The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently. Back pad (PAD1) The back pad (PAD1) features a powder coated anodised aluminium plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights. 15 mm 18" rods (15TUBE18) 01 Shape 15tube18 Product PicturePair of 15 mm rods 18" long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminum tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.  

Shape Sony a7S III Cage with 15mm LW Rod System

SH-A7S3ROD SHA7S3ROD SH A7S3ROD SH/A7S3ROD Shape Sony a7S III Cage with 15mm LW Rod System Shape Sony A7S3 Cage With 15MM LW Rod System Sony Alpha a7S III cage Made from CNC-machined aluminium, the cage is specially designed for the Sony Alpha a7S III. The camera is strongly mounted to the cage using a 1/4-20 screw and an Allen key. The cage is designed with the following mounting options: (1) cold shoe, several 1/4-20 threaded holes and (7) 3/8″-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 3 left cables as well as your 4K FULL HDMI cable is included with the cage. The bottom of the cage has (2) 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. A DELTA adapter (included in this package) can be added to mount on 15 LWS baseplate, an ARRI rosette can be added on the right side to mount compatible accessories. Wooden Push-Button Top Handle The ergonomic and easily removable SHAPE Top Handle was designed to provide the required space for mounting your Audio Unit. It offers a comfortable and secure wooden grip for carrying your camera and securing accessories. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its locked. This nicely crafted Push-Button Top Handle provides multiple mounting options, including ARRI Standard 3/8″-16 anti-rotating hole patterns on the top, SHAPE Standard 1/4″-20 anti-rotating hole patterns on the top and side, cold shoe mounts, and a 3/8″-16 UNC threaded hole at the front. The SHAPE Rod Clamp at the front (15CTH) can be added, allowing you to directly mount a 15 mm rod onto the handle. Made of CNC Aluminium, the 15 mm LW Clamp (15CTH) can be easily attached to the top Handle. The clamp is designed to support a 15 mm rod such as the SHAPE REVOLT EVF Mount Bracket. The ratchet knob clamp lets you adjust and strongly fix the position of the 15 mm rod to the SHAPE Top Handle and (2) cold shoe mounts, one at the front of the handle and one at the back.

SHAPE Sony a7S III Offset Shoulder Mount

SH-A7S3OF SH/A7S3OF SHA7S3OF SH A7S3OF SHAPE Sony a7S III Offset Shoulder Mount About The SHAPE Sony A7SIII Offset Shoulder Mount Sony Alpha A7S III cage Made from CNC-machined aluminium, the cage is specially designed for the Sony Alpha a7S III. The camera is strongly mounted to the cage using a 1/4-20 screw and an Allen key. The cage is designed with the following mounting options: (1) cold shoe, several 1/4-20 threaded holes and (7) 3/8"-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 3 left cables as well as your 4K FULL HDMI cable is included with the cage. The bottom of the cage has (2) 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. A DELTA adapter (included in this package) can be added to mount on 15 LWS baseplate,  an ARRI rosette can be added on the right side to mount compatible accessories (included in this package). Wooden Push-Button Top Handle The ergonomic and easily removable SHAPE Top Handle was designed to provide the required space for mounting your Audio Unit. It offers a comfortable and secure wooden grip for carrying your camera and securing accessories. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its locked. This nicely crafted Push-Button Top Handle provides multiple mounting options, including ARRI Standard 3/8″-16 anti-rotating hole patterns on the top, SHAPE Standard 1/4″-20 anti-rotating hole patterns on the top and side, cold shoe mounts, and a 3/8″-16 UNC threaded hole at the front. The SHAPE Rod Clamp at the front (15CTH) can be added, allowing you to directly mount a 15 mm rod onto the handle. Made of CNC aluminium, the 15 mm LW Clamp (15CTH) can be easily attached to the top Handle. The clamp is designed to support a 15 mm rod such as the SHAPE REVOLT EVF Mount Bracket. The ratchet knob clamp lets you adjust and strongly fix the position of the 15 mm rod to the SHAPE Top Handle and (2) cold shoe mounts, one at the front of the handle and one at the back. Quick handle rod bloc (HAND5) The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminium rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. Composite mini shoulder pad (SHPAD3) The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently. Back pad (PAD1) The back pad (PAD1) features a powder coated anodized aluminium plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights. 15 mm 10" rods (15TUBE10) This pair of SHAPE 15 mm aluminium Rods (10") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish. 15 mm 12" rods (15TUBE12) This pair of SHAPE 15 mm aluminium Rods (12") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

SHAPE Sony a7S III Kit inc. Matte Box and Follow Focus

SH-A7S3KIT SHA7S3KIT SH A7S3KIT SH/A7S3KIT SHAPE SONY a7S III Kit inc. Matte Box and Follow Focus Shape Sony A7S3 Kit Matte Box Follow Focus Sony Alpha a7S III cage Made from CNC-machined aluminium, the cage is specially designed for the Sony Alpha a7S III. The camera is strongly mounted to the cage using a 1/4-20 screw and an Allen key. The cage is designed with the following mounting options: (1) cold shoe, several 1/4-20 threaded holes and (7) 3/8"-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 3 left cables as well as your 4K FULL HDMI cable is included with the cage. The bottom of the cage has (2) 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. A DELTA adapter (included in this package) can be added to mount on 15 LWS baseplate, an ARRI rosette can be added on the right side to mount compatible accessories (included in this package). Wooden Push-Button Top Handle The ergonomic and easily removable SHAPE Top Handle was designed to provide the required space for mounting your Audio Unit. It offers a comfortable and secure wooden grip for carrying your camera and securing accessories. It also features the SHAPE Push-Button Technology, enabling you to balance the weight and rotate the handle in the position you need for a 360-degree axis. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its locked. This nicely crafted Push-Button Top Handle provides multiple mounting options, including ARRI Standard 3/8″-16 anti-rotating hole patterns on the top, SHAPE Standard 1/4″-20 anti-rotating hole patterns on the top and side, cold shoe mounts, and a 3/8″-16 UNC threaded hole at the front. The SHAPE Rod Clamp at the front (15CTH) can be added, allowing you to directly mount a 15 mm rod onto the handle. Made of CNC Aluminum, the 15 mm LW Clamp (15CTH) can be easily attached to the top Handle. The clamp is designed to support a 15 mm rod such as the SHAPE REVOLT EVF Mount Bracket. The ratchet knob clamp lets you adjust and strongly fix the position of the 15 mm rod to the SHAPE Top Handle and (2) cold shoe mounts, one at the front of the handle and one at the back. SHAPE kit focus single rod follow focus 15 mm LWs (FA123) Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens. At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminum 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. At the centre of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crank; All gears can be flipped to the front or back position which is helpful for compact lens configurations; Two rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera body; Swing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you're ready; A compact design takes little space, so you can still attach a matte box to the front; Use the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place. Matte box 4x5.6 (MAT4X56) The 2-Stage 4 x 5.6" matte box from SHAPE can be used as a clip-on matte box and can be mounted on industry-standard 15 mm rod system. It is designed for light control, insertion, and adjustment of filters. It features a two-stage rotating 4 x 5.6" filter holder. The matte box accepts lenses with a front diameter up to 114 mm. It comes with a 82 mm filter ring and six step-up rings that allow you to fit lenses with an outer diameter (52-82, 58-82, 62-82, 67-82, 72-82, 77-82)mm.

SHAPE Sony a7S III Cage

SH-A7S3CAGE SHA7S3CAGE SH A7S3CAGE SH/A7S3CAGE SHAPE Sony a7S III Cage Shape Sony A7S3 Cage Made from CNC-machined aluminium, the cage is specially designed for the Sony Alpha a7S III. The camera is strongly mounted to the cage using a 1/4-20 screw and an Allen key. The cage is designed with the following mounting options: (1) cold shoe, several 1/4-20 threaded holes and (7) 3/8″-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 3 left cables as well as your 4K FULL HDMI cable is included with the cage. The bottom of the cage has (2) 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. A DELTA adapter can be added to mount on 15 LWS baseplate, (not included). An ARRI rosette can be added on the right side to mount compatible accessories.

Shape SH-FX9RH Sony FX9 Remote Extension Kit

Shape SH-FX9RH (SH/FX9RH, SH_FX9RH, SHFX9RH, SH FX9RH, sh-fx9rh, FX9RH) Sony FX9 Remote Extension Kit The Sony FX9 remote extension handle from SHAPE offers an adjustable arm extension (2 inches) for the side handgrip provided with the Sony FX9. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm. It is designed with Arri rosettes to mount on the camera or baseplate with standard ARRI rosettes. It also features SHAPE’s patented Push-Button technology for easy angle adjustment and 360-degree rotation. SHAPE is well known for its patented Push-button system, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the remote extension handle in the best position for your use. Push, adjust, release, and then its lock.

Shape SH-FX9BT Baseplate and Top Plate for Sony FX9

Shape SH-FX9BT (FX9BT, SH/FX9BT, SH_FX9BT, SHFX9BT, sh-fx9bt) Baseplate and Top Plate for Sony FX9 Add accessories and handheld functionality to your Sony PXW-FX9 camera with this Pro Shoulder Rig Kit from SHAPE. This kit includes a shoulder mount baseplate with a 15mm rod system, a top plate, a rear insert plate, and a rosette handle with black push-button. The baseplate includes an integrated shoulder mount that allows you to convert your tripod-mounted camera into a handheld shoulder rig. The rear insert plate attaches to the rear of the camera to support it on the baseplate. The 15mm rods allow you to mount additional accessories like a matte box and follow focus. The push-button handle attaches to the baseplate and can rotate using the rosette joints for the most comfortable position. Sony FX9 V-lock quick-release baseplate (FX9BP) 02 Shape Fx9bp Insert On Baseplate 3The FX9 baseplate is designed to match the Sony FX9 optical center. The bracket system with a magnet lets you swivel the baseplate to the left for easy access to the camera screws. It is designed with 2 standard Arri rosettes for handles or accessories mount. The quick-release adapter plate is compatible with most VCT tripod plates and there is also a protective rubber pad on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. The safety ratchet knobs are built in a way to apply optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated toolbox to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time-saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key. Sony FX9 rear insert plate (FX9RIP) 01 Shape Fx9rip Insert On Baseplate 3The rear insert plate is a CNC aluminum support plate compatible with the Sony FX9 camera. The plate mounts to the camera body via three M4 mounting screws. The center of the plate is designed with (3) 3/8-16 and (3) 1/4-20 threaded holes for tripod mount. The large surface of the plate also provides necessary support when the camera is mount to a tripod or a shoulder mount. Sony FX9 Top plate (FX9TP) 02 Shape Fx9tp HandleLightweight and robust CNC machined aluminum top plate designed to fit around the native Sony FX9 top handle. The top plate offers an array of (12) 1/4-20 and (12) 3/8-16 threads with Arri standard anti rotating holes, which can be used to attach options around the camera. The Sony FX9 top plate is also designed with a threaded hole to insert your FX9 sensor pin and your FX9 viewfinder cable clamp. Topside: (6) 3/8-16 threads with Arri standard anti rotating holes and (7) 1/4-20 threads with Arri standard anti rotating holes Side 1 (0.75’’): (6) 3/8-16 threads with Arri standard anti rotating holes and (5) 1/4-20 threads with Arri standard anti rotating holes Side 2 (0.5’’): (6) 1/4-20 threads with Arri standard anti rotating holes 15 mm 8" rods (15TUBE8) 01 Shape 15tube8 Product PictureOne pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig. 15-mm diameter 8-in length Hollow, non-threaded Tapered ends for easy connection to a rod block Aluminum coated with a clear finish 15 mm 4" rods (15TUBE4) 01 Shape 15tube4 Product PictureOne pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig. 15-mm diameter 4-in length Hollow, non-threaded Tapered ends for easy connection to a rod block Aluminum coated with a clear finish

Shape Cage Kit with Matte Box & Follow Focus for Blackmagic Pocket Cinema Camera 4K

Shape SH-BM4SMKIT (SHBM4SMKIT, SH_BM4SMKIT, SH/BM4SMKIT, SH BM4SMKIT) Cage Kit with Matte Box & Follow Focus for Blackmagic Pocket Cinema Camera 4K CBM4K cage made of CNC Machined Aluminium with Shoulder Mount. Also includes Matte Box 4x4, Follow Focus, Top Handle, Quick Handles, 15mm Quick Release Rod Base System and 15mm Rods. Top and bottom of the cage designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble.

Shape Cage Kit with Matte Box & Follow Focus for Blackmagic Pocket Cinema Camera 4K

Shape SH-BM4KIT (SHBM4KIT, SH/BM4KIT, SH BM4KIT, SH_BM4KIT) Cage Kit with Matte Box & Follow Focus for Blackmagic Pocket Cinema Camera 4K CBM4K cage made of CNC Machined Aluminium. Also includes matte box 4x4, follow focus, top handle, 15mm quick release rod base system and 15mm rods. Top and bottom of the cage designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble.

Shape Blackmagic Pocket Cinema 4K Offset Shoulder Mount

Shape SH-BM4KSMOF (SHBM4KSMOF, SH/BM4KSMOF, SH_BM4KSMOF, SH BM4KSMOF) Blackmagic Pocket Cinema 4K Offset Shoulder Mount CBM4K cage made of CNC Machined Aluminium with shoulder mount and back pad. Also includes top handle, pair of quick handles, 15mm quick release rod base system, rods and offset rail rod bloc. Top and bottom of the cage designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble.

Shape Blackmagic Pocket Cinema 4K Shoulder Mount

Shape SH-BM4KSM (SH/BM4KSM, SHBM4KSM, SH_BM4KSM, SH BM4KSM) Blackmagic Pocket Cinema 4K Shoulder Mount CBM4K cage made of CNC Machined Aluminium with shoulder mount and back pad. Also includes top handle, pair of quick handles, 15mm quick release rod base system and rods. Top and bottom of the cage designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble.

Shape Camera Cage with 15mm Rod System for Blackmagic Pocket Cinema 4K

Shape SH-C4KROD (SH/C4KROD, SH_C4KROD, SH C4KROD, SHC4KROD) Camera Cage with 15mm Rod System for Blackmagic Pocket Cinema 4K Cage made of CNC Machined Aluminium. Top and bottom designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble - you don’t need to remove any parts to install the camera. Includes top handle, 15mm quick release rod base system and rods.

Shape Blackmagic Pocket Cinema 4K Handheld Cage

Shape SH-BM4KHH (SH/BM4KHH, SH_BM4KHH, SHBM4KHH, SH BM4KHH) Blackmagic Pocket Cinema 4K Handheld Cage Shape BM4KHH (BM4K-HH) Handheld Cage for Blackmagic made of CNC Machined Aluminium. Top and bottom of the cage are designed with ¼-20 threaded holes with anti rotating pins to strongly secure the camera position. ¼-20 threaded holes for easy tripod plate attachment. The cage allows easy access to the memory card, the battery door, the lens release button and all other controls and outputs. Right side of the cage is designed to let you grasp and feel the camera, while the included strap firmly keeps your hand against the camera. Lightweight and robust, easy to assemble and disassemble - you don’t need to remove any parts to install the camera. Includes rod indexable left side wooden handle.

Shape DSLR Kirk Neff Offset Rig

Shape SH-DSLRKN2 (SH_DSLRKN2, SHDSLRKN2, SH DSLRKN2, SH/DSLRKN2) DSLR Kirk Neff Offset Rig The DSLR Kirk Neff Offset Rig from SHAPE is a 15mm rod, shoulder-mount solution designed for DSLR or other compact cameras. The offset design places your camera's LCD screen in front of your eyes for easier viewing while shooting. Centered around the DSLR Kirk Neff Baseplate 2.0, the rig features a rod offset bracket, and a pair of 10" and 12" long 15mm rods that support the included shoulder pad and handgrips. The shoulder pad and handgrips can be removed for tripod-mounted setups. Your camera attaches to the baseplate via a V-lock quick-release camera plate. The plate is also compatible with third party support systems that utilize the V-lock interface. The baseplate provides clamps to support one of the 15mm rod pairs, allowing you to the dual handgrips in front of the baseplate, as well as the rod offset bracket behind it. The Quick Handle Rod Bloc provides dual handgrip support and features SHAPE's push button rosette release, which allows you to adjust the angle of the handgrips without having to remove your hands from the rig. At the rear of the rig is the Mini Composite Shoulder Pad which provides padded shoulder support for the rig. It mounts onto the pair of 15mm rods extending out the back of the rod offset bracket. A Back Pad is included which attaches to the shoulder pad for augmented camera support and comfort. A 1/4"-20 hole allows for additional accessories to be added. DSLR Kirk Neff Baseplate 2.0 The DSLR Kirk Neff Baseplate 2.0 from SHAPE is a 15mm rod baseplate designed for DSLR cameras that utilizes a standard V-lock quick-release system. The quick-release plate provides a 1/4"-20 threaded camera screw and has rubber stoppers at the back to prevent your camera from twisting during operation. The rubber stoppers can be adjusted and removed using the included hex key. For alignment and balance adjustments, the V-lock delta adapter on the bottom of the quick-release plate can be also adjusted forward/backward, and the camera screw can be placed in a front or rear position - using appropriate hex keys. The baseplate itself features two 15mm rod ports with thumbscrews. It's design places the optical center of camera between the two rods and places the lens at a height suitable for use with a matte box. A pair of 8" aluminum rods come included. 15mm rod baseplate for DSLR cameras V-lock quick-release system Adjustable and removable rubber stoppers on quick-release plate prevent camera for twisting 1/4"-20 camera screw Baseplate respects DSLR optical center 8" aluminum 15mm rods included Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Quick Handle Provides professional video stabilization with 2 handles Each handle offers 360° individual rotation Offers easy attachment/removal Rod Block Composed of anodized aluminum Offers composite camera support for all 15mm rods Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob With 2 screw-threaded holes, the Rod Block provides for attachment of components Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Compatible Support Series: Composite Cameleon Sumo Spider Off-Set Bracket for Blackmagic Cage The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. 15mm Aluminum Rods (Pair, 12") This pair of Shape 15mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.  

Shape ARRI Standard Bridgeplate and 12" Dovetail Plate with 19mm Rods

Shape SH-DPK19 (SH/DPK19, SH_DPK19, SHDPK19, SH DPK19) ARRI Standard Bridgeplate and 12" Dovetail Plate with 19mm Rods SHAPE ARRI Standard 19mm Studio Bridge Plate & 12′′ Dovetail Plate Kit DPK19 This lightweight and strong aluminum body ARRI Standard 19mm Studio Bridge Plate slides onto an ARRI Standard Dovetail Plate and uses 19mm rods (12′′) (rods spaced104mm center to center). Additionally, the Bridge Plate is equipped with a convenient Custom Flat Screwdriver that is integrated and secured by a magnet, used to quickly tighten the 1/4′′-20 and 3/8′′-16 UNC captive screws (included) that hold the base components together. There is also a locking lever to lock the Bridge Plate firmly in place and a slotted design to accommodate screw spacings. The SHAPE Lightweight ARRI Standard 12′′ Dovetail Plate allows you to quickly and easily balance the weight when using front or back heavy camera equipment. It also features an easy-to-access stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. The dovetail also provides several 1/4′′-20 and 3/8′′-16 threaded holes for tripod plate attachment. It can be attached to a shoulder pad for custom handheld configurations.

Shape ARRI Standard Bridgeplate and 12" Dovetail Plate with 15mm Rods

Shape SH-DPK15 (SHDPK15, SH DPK15, SH/DPK15, SH_DPK15) ARRI Standard Bridgeplate and 12" Dovetail Plate with 15mm Rods  SHAPE ARRI Standard 15mm Studio Bridge Plate & 12′′ Dovetail Plate Kit This lightweight and strong aluminum body ARRI Standard 15mm Studio Bridge Plate slides onto an ARRI Standard Dovetail Plate; it uses 15mm rods (12′′) and 15mm Studio Offset Spacing (rods spaced 100mm center to center).Additionally, the Bridge Plate is equipped with a convenient Custom Flat Screwdriver that is integrated and secured by a magnet, used to quickly tighten the 1/4′′-20 and 3/8′′-16 UNC captive screws (included) that hold the base components together. Thereis also a locking lever to lock the Bridge Plate firmly in place and a slotted design to accommodate screw spacings. The SHAPE Lightweight ARRI Standard 12′′ Dovetail Plate allows you to quickly and easily balance the weight when using front or back heavy camera equipment. It also features an easy-to-access stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. The dovetail also provides several 1/4′′-20 and 3/8′′-16 threaded holes for tripod plateattachment. It can be attached to a shoulder pad for custom handheld configurations.

Shape ARRI Standard Bridgeplate with 19mm Rods

Shape SH-DP19S (SH/DP19S, SH_DP19S, SHDP19S, SH DP19S) ARRI Standard Bridgeplate with 19mm Rods This lightweight and strong aluminum body ARRI Standard 19mm Studio Bridge Plate slides onto an ARRI Standard Dovetail Plate and uses 19mm rods (12′′) (rods spaced 104mm center to center). Additionally, the Bridge Plate is equipped with a convenient Custom Flat Screwdriver that is integrated and secured by a magnet, used to quickly tighten the 1/4′′-20 and 3/8′′-16 UNC captive screws (included) that hold the base components together. There is also a locking lever to lock the Bridge Plate firmly in place and a slotted design to accommodate screw spacings.

Shape 19mm Studio Sliding Baseplate For Sony Venice

Shape SH-VN19D (SH/VN19D, SH VN19D, SHVN19D, VN19D, sh-vn19d) 19mm Studio Sliding Baseplate For Sony Venice Build a VENICE studio rig with the SHAPE 19mm Studio Sliding Baseplate for Sony VENICE. The sliding studio bridgeplate conforms to the ARRI standard and has clamps for properly spaced 19mm studio rods for securing a lens support, follow focus, matte box, or other accessory. A pair of 12" rods is included for that purpose. Slide the bridgeplate along the included 12" ARRI-standard dovetail to achieve balance atop a tripod or other grip equipment. For finer adjustment, the riser plate also slides back and forth for camera positioning relative to the bridgeplate. Assembly tools and camera mounting screws are included inside a magnetic tool box that fits beneath the plate.

Shape 15mm Studio Sliding Baseplate For Sony Venice

Shape SH-VN15D (SH/VN15D, SH VN15D, SHVN15D, VN15D, sh-vn15d) 15mm Studio Sliding Baseplate For Sony Venice Build a VENICE studio rig with the SHAPE 15mm Studio Sliding Baseplate for Sony VENICE. The sliding studio bridgeplate conforms to the ARRI standard and has clamps for properly spaced 15mm studio rods for securing a lens support, follow focus, matte box, or other accessory. A pair of 12" rods is included for that purpose. Slide the bridgeplate along the included 12" ARRI-standard dovetail to achieve balance atop a tripod or other grip equipment. For finer adjustment, the riser plate also slides back and forth for camera positioning relative to the bridgeplate. Assembly tools and camera mounting screws are included inside a magnetic tool box that fits beneath the plate.

Shape Top Plate for Sony Venice with 15 mm LW front Rod Clamp

Shape SH-VNT15 (SH/VNT15, SH VNT15, SHVNT15, VNT15, sh-vnt15) Top Plate for Sony venice with 15mm LW front Rod Clamp The robust CNC machined aluminium Top Plate is designed to support and facilitate the handling of your Sony Venice Camera. It is secured on top of the camera using four 1/4″-20 UNC socket head cap screws. The Top Plate offers an array of 3/8″-16 UNC threaded mounting holes on the top and on both sides, including the ARRI anti-rotating system which can be used to better secure your accessories directly mounted onto the Top Plate. It also features two velcro strap attachment slots for cable management to keep cables away from the camera menu screens and buttons. The SHAPE Top Plate fits the Sony Venice original handle perfectly well and can be placed further forward for better balance. The 15mm Top Plate Rods allow you to mount the original Sony viewfinder bracket. The Top Plate can be equipped with a removable 15mm Studio Rod Clamp for Top Plate 15CTH or a 19mm Studio Rod Clamp for Top Plate 19CTH that can be mounted at the front of the Top Plate, allowing easy positioning of 15mm and 19mm rods to set the accessories at the proper height with respect to the Sony Venice camera optical center.   In addition, the original Sony Venice Camera Top Handle can be used with the SHAPE Sony Venice Top Plate for a lightweight shoulder rig solution. The SHAPE Top Plate also features a dovetail and safety pin system that reproduce the one on top of the camera body; the Allen Key must be temporarily removed to insert it into the Top Handle. The SHAPE Top Plate comes with a tool box and magnetic Allen Key which are useful for adjusting and installing the Top Plate onto the camera. 

Shape Sony FS7 Lightweight Bundle Rig

Shape SH-FS7LWBR (SH-FS7LWBR, SH-FS7LWBR, FS7LWBR, sh-fs7lwbr) Sony FS7 Lightweight Bundle Rig The Sony FS7 Lightweight Bundle Rig from SHAPE expands the accessory support of your FS7 camera by outfitting it with a 15mm rod baseplate and a top plate with 1/4"-20 and 3/8"-16 threaded holes. It also replaces the rosette arm section of the FS7's handgrip with a piece that allows for faster and easier grip position adjustments. The baseplate includes a pair of 8" long 15mm rods for attaching optional accessories such as a follow focus and matte box, and its compact design leaves access to the camera's shoulder pad open. A V-lock adapter on the underside of the baseplate allows the camera to be mounted on quick-release V-lock tripod plates. It also provides ARRI rosettes on each side for attaching the included Sony FS7 Remote Extension Handle and an optional left-sided rosette handle. The Remote Extension Handle features SHAPE's patented push-button design technology and ratcheting levers for quick and easy rotation and extension adjustment of the camera's remote handgrip. The Top Plate attaches around the FS7's top handle using a pair of supplied screws, providing 1/4"-20 and 3/8"-16 threads on top of the camera. This is useful for articulating arms to support external monitors and viewfinders, or mounting additional accessories. Sony FS7 Lightweight Plate The Sony FS7 Lightweight Plate from SHAPE is a fixed baseplate that provides 15mm LWS rod support without interfering with the camera's shoulder-mount design. A pair of 8" long 15mm rods is included for attaching optional accessories such as a follow focus and matte box. In addition to rod ports, the Lightweight Plate also features ARRI rosettes on each side for attaching the FS7's right handle and an optional left-sided rosette handle. On the underside of the baseplate is a V-lock delta adapter, allowing the baseplate to be mounted on V-lock quick-release tripod plates, such as the Panasonic SHAM-TM700 or Sony VCT14. The delta adapter is attached to a bottom door, which can be opened up to access 1/4"-20 and 3/8"-16 camera screws. Top Plate for Sony FS7 Camera Use the top surface of your FS7 camcorder to mount accessories with this Top Plate from SHAPE. With multiple 1/4"-20 and 3/8"-16 tapped holes, this top plate will accept many standard accessories from magic arms to cold shoe adapters. The U-shape of the plate allows for the original camera handle to remain mounted while the non-flush design prevents over-tightened screws from puncturing the top of the camera casing. Sony FS7 Remote Extension Handle   The Sony FS7 Remote Extension Handle from SHAPE is a replacement for the rosette arm section of the FS7's SmartGrip handle, adding SHAPE's patented push-button design technology for easy angle adjustment. It also provides a ratcheting lever for quick length adjustment of the SmartGrip's support arm.

Shape Panasonic AU-EVA1 Camera Bayonet Mount Remote Extension With Cable

Shape SH-EVACA (SH/EVACA, SH EVACA, SHEVACA, EVACA, sh-evaca) Panasonic AU-EVA1 Camera Bayonet Mount Remote Extension With Cable The Panasonic AU-EVA1 remote extension handle with Bayonet mount from SHAPE offers an adjustable arm extension for the side hand grip provided with the Panasonic AU-EVA1. The Remote Extension Handle is designed with a Bayonet Mount, allowing you to quickly attach and secure the handle to the Panasonic AU-EVA1 female adaptor camera body. It also features SHAPE's patented Push-button Technology for easy angle adjustment and 360-degree rotation. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm.

Shape Accessory Mounting Clamp For 25mm Gimbal Rod With 2-Axis Revolt Arm

Shape SH-RPB25 (SH/RPB25, SH RPB25, SHRPB25, RPB25, sh-rpb25) Accessory Mounting Clamp For 25mm Gimbal Rod With 2-Axis Revolt Arm The RPB25 2-Axis Push-Button Arm for 25mm Gimbal Rod is a SHAPE kit that enables you to securely mount accessories to your gimbal rig. Compatible with rod diameters from 24.9 to 25.5mm, this 2-axis arm enables you to tilt and pan the accessory for optimal positioning. Dual-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw Providing push button adjustment, the SHAPE Dual-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw allows you to quickly mount this accessory support arm to a 1/4"-20 threaded mounting hole. You mount your 1/4"-20 accessory to the top of the arm, which features a small mounting platform with rubberized surface. The D-ring assembly enables you to securely tighten down the screw without using tools. The arm is 3.5" long and features slotted D-rings mounting screws enabling you to either use a slotted screwdriver to tighten the screws, or finger-tighten using the D-ring. The push button adjustment allows you to tilt the mounting platform forward or backward, and another push button provides you with pan adjustment to position your accessory just how you want it. This arrangement doesn't require you to stress, strain, or worry when loosening or tightening the central lock-down arm common to most accessory arms. Additionally, each push button only controls one axis, so you don't have to worry about your arm collapsing when you make an adjustment.

Shape Composite F3

Shape SH-COMPOF3 (SH_OMPOF3, SHCOMPOF3, SH/COMPOF3, SH COMPOF3) Composite F3 The SHAPE COMPOSITE F3 is designed to position the camera near or over the shoulder, and allows for quick adjustments and easy customizations. It is easy to set up and requires a 0.16” (4mm) hexagonal key. With various threaded holes (20.25”/51.44cm and 16.38”/41.61cm) at its base, the paparazzi riser camera platform allows for attachment of the quick release plate. The front rods of the COMPOSITE F3 allow you to attach video accessories such as a matte box, a 1.38” (35mm) lens adaptor, and a follow focus mechanism. Each handle of the COMPOSITE F3 can be individually rotated to 360° by pressing the button located at the articulation. With the release of this button, the handle stays firmly at 1 place. Made of lightweight aluminum, the components of the COMPOSITE F3 offer strength and durability. Most of the parts sport a powder coat paint with wrinkle finish and the rest of the parts are hard anodized. Designed to position the camera near the shoulder or over the shoulder Allows for quick adjustments and easy customizations Easy to set up; requires a 0.16" (4mm) hexagonal key Paparazzi riser camera platform has various threaded holes (20.25"/51.44cm and 16.38"/41.61cm) at its base, which allows for attachment of the quick release plate Front rods of the Composite F3 allow you to attach video accessories such as a matte box, a 1.38" (35mm) lens adaptor, and a follow focus mechanism Each handle of the Composite F3 can be individually rotated to 360° by pressing the button located at the articulation; with the release of this button, the handle stays firmly at one place Components are made of lightweight aluminum, which offers strength and durability Most of the parts sport a powder coat paint with wrinkle finish and the rest of the parts are hard anodized Shoulder pad and the back pad are padded for superior comfort  

Shape BLOC 15 Arri Rosette Adapter for 15mm LWS and Studio-Spaced Rods

Shape SH-BLOC1515ST (SH_BLOC1515ST, SHBLOC1515ST, SH/BLOC1515ST, SH BLOC1515ST) BLOC 15 Arri Rosette Adapter for 15mm LWS and Studio-Spaced Rods The BLOC 15 Arri Rosette Adapter for 15mm LWS and Studio-Spaced Rods from SHAPE provides a left hand and a right hand Arri rosette for the addition of hand grips and other accessories to a 15mm rod system. The adapter features both 60mm center-to-center "LWS" (light weight support) and 100mm center-to-center "Studio" spacings for compatibility with virtually any 15mm rod system (19mm rods are not supported).

Shape V-Lock Quick Release Baseplate for Blackmagic URSA mini

Shape SH-URSABP (SHURSABP, SH/URSABP, SH URSABP, URSABP, sh-ursabp) V-Lock Quick Release Baseplate for Blackmagic URSA mini The SHAPE V-Lock Quick Release Baseplate is designed specifically for the Blackmagic URSA Mini cameras. It can be used shoulder mounted, tripod mounted, or attached to V-Lock tripod adapters. The baseplate includes a removable shoulder pad and ARRI standard rosettes for installing SHAPE handles. The baseplate offers 1/4"-20 and 3/8"-16 tripod mount threads, and includes 8" and 4" rods made of hard anodized aluminum for strength and durability.

Shape Blackmagic URSA Mini Bundle Rig

Shape SH-URSABR (SH_URSABR, SHURSABR, SH/URSABR, SH URSABR) Blackmagic URSA Mini Bundle Rig Shape designed this new bundle to offer a balanced solution directly on the shoulder when using the Blackmagic URSA Mini. This kit was designed  to provide a balanced shoulder mount solution and to help you shoot for long hours with comfort. The baseplate is built sturdy and lightweight  for a perfect fit with the URSA Mini features. This solution comes with 15mm-8 inches rods and 15mm- 4 inches rods and offers two levels of adjustment for the front rods. The bundle also includes a remote extension arm enabling users to fix the Ursa mini side hand grip directly on the ARRI rosettes of the baseplate. The adjustable arm length provides great versatility and features a push-button for a 360 degree rotation. The kit also includes Shape handle grip with the patented red push-button technology.  

Shape Blackmagic URSA Mini Kit with Matte Box & Follow Focus Pro

Shape SH-URSAKIT (SH_URSAKIT, SHURSAKIT, SH/URSAKIT, SH URSAKIT) Blackmagic URSA Mini Kit with Matte Box & Follow Focus Pro The SHAPE Blackmagic URSA Mini Kit is designed to provide a balanced shoulder mount solution and to help you shoot for long hours with comfort. The baseplate is sturdy and lightweight for compatibility with the URSA Mini. This solution comes with 8" and 4" 15mm rods, and offers two levels of adjustment for the front rods. This kit also includes the SHAPE Matte Box 4x4 for optimal image quality. The ergonomic and robust SHAPE Follow Focus Pro is also a part of this bundle, allowing for quick attachment, removal, and repositioning.  The bundle includes a remote extension arm, enabling users to attach the URSA Mini side handgrip directly onto the ARRI rosettes on the baseplate. The adjustable arm length provides flexibility, and features a push button for 360° rotation. The kit also includes the SHAPE handle grip with the red push button technology. 

Shape DSLR Kirk Neff Baseplate 2.0

Shape SH-DSLRKNBPLT2.0 (SH_DSLRKNBPLT2.0, SHDSLRKNBPLT2.0, SH/DSLRKNBPLT2.0, SH DSLRKNBPLT2.0) DSLR Kirk Neff Baseplate 2.0 The DSLR Kirk Neff Baseplate 2.0 from SHAPE is a 15mm rod baseplate designed for DSLR cameras that utilizes a standard V-lock quick-release system. The quick-release plate provides a 1/4"-20 threaded camera screw and has rubber stoppers at the back to prevent your camera from twisting during operation. The rubber stoppers can be adjusted and removed using the included hex key. For alignment and balance adjustments, the V-lock delta adapter on the bottom of the quick-release plate can be also adjusted forward/backward, and the camera screw can be placed in a front or rear position - using appropriate hex keys. The baseplate itself features two 15mm rod ports with thumbscrews. It's design places the optical center of camera between the two rods and places the lens at a height suitable for use with a matte box. A pair of 8" aluminum rods come included.

Shape DSLR Kirk Neff Rig

Shape SH-DSLRKN3 (SH_DSLRKN3, SHDSLRKN3, SH/DSLRKN3, SH DSLRKN3) DSLR Kirk Neff Rig The DSLR Kirk Neff Rig from Shape is a 15mm rod, shoulder-mount solution designed for DSLR or other compact cameras. Centered around the DSLR Kirk Neff Baseplate 2.0, the bundle features a pair of 18" long 15mm rods that supports the included Quick Handle Rod Bloc and Mini Composite Shoulder Pad with Back Pad. You can also expand your rig with the addition of optional accessories such as a matte box and follow focus. The shoulder pad and handgrips can be removed for mounting the rig onto a tripod. Your camera attaches to the baseplate via a V-lock quick-release camera plate. The plate is also compatible with third party support systems that utilize the V-lock interface. The baseplate provides clamps to support one of the 15mm rod pairs, allowing you to the dual handgrips in front of the baseplate, as well as the rod offset bracket behind it. The Quick Handle Rod Bloc provides dual handgrip support and features SHAPE's push button rosette release, which allows you to adjust the angle of the handgrips without having to remove your hands from the rig. At the rear of the rig is the Mini Composite Shoulder Pad which provides padded shoulder support for the rig. It mounts onto the pair of 15mm rods extending out the back of the rod offset bracket. A Back Pad is included which attaches to the shoulder pad for augmented camera support and comfort. A 1/4"-20 hole allows for additional accessories to be added. DSLR Kirk Neff Baseplate 2.0 The DSLR Kirk Neff Baseplate 2.0 from SHAPE is a 15mm rod baseplate designed for DSLR cameras that utilizes a standard V-lock quick-release system. The quick-release plate provides a 1/4"-20 threaded camera screw and has rubber stoppers at the back to prevent your camera from twisting during operation. The rubber stoppers can be adjusted and removed using the included hex key. For alignment and balance adjustments, the V-lock delta adapter on the bottom of the quick-release plate can be also adjusted forward/backward, and the camera screw can be placed in a front or rear position - using appropriate hex keys. The baseplate itself features two 15mm rod ports with thumbscrews. It's design places the optical center of camera between the two rods and places the lens at a height suitable for use with a matte box. A pair of 8" aluminum rods come included. 15mm rod baseplate for DSLR cameras V-lock quick-release system Adjustable and removable rubber stoppers on quick-release plate prevent camera for twisting 1/4"-20 camera screw Baseplate respects DSLR optical center 8" aluminum 15mm rods included Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Quick Handle Provides professional video stabilization with 2 handles Each handle offers 360° individual rotation Offers easy attachment/removal Rod Block Composed of anodized aluminum Offers composite camera support for all 15mm rods Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob With 2 screw-threaded holes, the Rod Block provides for attachment of components Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Compatible Support Series: Composite Cameleon Sumo Spider 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps. Pair of aluminum support rods for 15mm rod clamps. 18" long rods with chamfered ends that guide the rod into an available rod clamp, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.

Shape DSLR Kirk Neff Offset Rig Bundle

Shape SH-DSLRKN1 (SH_DSLRKN1, SHDSLRKN1, SH/DSLRKN1, SH DSLRKN1) DSLR Kirk Neff Offset Rig Bundle The DSLR Kirk Neff Offset Rig Bundle from SHAPE is a 15mm rod, shoulder-mount solution designed for DSLR or other compact cameras and comes complete with a matte box and follow focus. The offset design places your camera's LCD screen in front of your eyes for easier viewing while shooting. At the heart of the bundle are the DSLR Kirk Neff Baseplate 2.0, a rod offset bracket, and a pair of 10"- and 12"-long 15mm rods. The rig, matte box, and follow focus are supported using an included shoulder pad and dual handgrips. Your camera attaches to the baseplate via a V-lock quick-release camera plate. The plate is also compatible with third party support systems that utilize the V-lock interface. The baseplate provides clamps to support one of the 15mm rod pairs, allowing you to mount the dual handgrips, matte box, and follow focus in front of the baseplate, as well as the rod offset bracket behind it. The follow focus uses a clamping mechanism to quickly attach and detached off of the rods. It features a removable white marking disc and comes with both a 0.8 pitch gear for interfacing with cine-style lenses, as well as a friction gear for use with lenses that lack built-in gear rings. To block unwanted light from hitting your lens, the matte box attaches to the rods and features a swing-away design for quick lens changes. It comes with a top flag, side flags, and provides two 4x4" rotating filter stages. The Quick Handle Rod Bloc provides dual handgrip support and features SHAPE's push button rosette release, which allows you to adjust the angle of the handgrips without having to remove your hands from the rig. At the rear of the rig is the Mini Composite Shoulder Pad which provides padded shoulder support for the rig. It mounts onto the pair of 15mm rods extending out the back of the rod offset bracket. A Back Pad is included, which attaches to the back of the shoulder pad for augmented camera support and comfort. A 1/4"-20 hole allows for additional accessories or weights to be added. DSLR Kirk Neff Baseplate 2.0 The DSLR Kirk Neff Baseplate 2.0 from SHAPE is a 15mm rod baseplate designed for DSLR cameras that utilizes a standard V-lock quick-release system. The quick-release plate provides a 1/4"-20 threaded camera screw and has rubber stoppers at the back to prevent your camera from twisting during operation. The rubber stoppers can be adjusted and removed using the included hex key. For alignment and balance adjustments, the V-lock delta adapter on the bottom of the quick-release plate can be also adjusted forward/backward, and the camera screw can be placed in a front or rear position - using appropriate hex keys. The baseplate itself features two 15mm rod ports with thumbscrews. It's design places the optical center of camera between the two rods and places the lens at a height suitable for use with a matte box. A pair of 8" aluminum rods come included. 15mm rod baseplate for DSLR cameras V-lock quick-release system Adjustable and removable rubber stoppers on quick-release plate prevent camera for twisting 1/4"-20 camera screw Baseplate respects DSLR optical center 8" aluminum 15mm rods included 2-Stage 4 x 4" Matte Box The SHAPE 2-Stage 4 x 4" Matte Box accepts lenses with up to a 100mm front outside diameter. It mounts to 15mm LWS rods and utilizes a swing-away design, which lets you perform quick lens changes without having to remove the matte box from your rods. You can adjust the height of the matte box in relation to the rods, which comes in handy when your lens center to rod center height is slightly off from the standard. Two rotating filter stages support the use of 4x4" filters. The matte box comes with a top flag (eyebrow), side flags, four matte box donuts in 66, 72, 82, and 90mm sizes, and elastic donut. The matte box has a rear opening of 100mm for lenses. The included anti-reflection donuts prevent light behind the camera from reflecting off any filters in the matte box and degrading the image. Included with the matte box are anti-reflection donuts for lenses with a front outside diameter of 66, 72, 82, and 90mm. The included elastic donut supports lenses with a front outside diameter between 66 and 90mm, and it is especially useful with lenses that grow and shrink as you change focus or zoom. The side flags incorporate a hook design as a safety feature where they attach to the matte box. This helps prevent them from falling out of the matte box should the lock-down thumbscrew loosen accidentally. The swing-away bracket incorporates a height adjustment, enabling you to compensate a total of 0.65" vertically. This allows you to use this matte box with a variety of camera/rod support combinations that may vary slightly from the industry standard 85mm distance from LWS rod center to lens port center. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Quick Handle Provides professional video stabilization with 2 handles Each handle offers 360° individual rotation Offers easy attachment/removal Rod Block Composed of anodized aluminum Offers composite camera support for all 15mm rods Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob With 2 screw-threaded holes, the Rod Block provides for attachment of components Friction & Gear Follow-Focus Clic with Adjustable Marker The Shape Friction & Gear Follow-Focus Clic with Adjustable Marker is designed to attach onto standard 15mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic atop the rods, and then slide and close a Shape-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods. The Clic's focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature -- the focus disk -- moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism, as you see in the photo above, or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from a cube-shaped gearbox that you can't see in the photo above because it sits behind the focus disk. Once the screws are off, the focus disk can just be flipped over for use with longer lens constructions. In the photo above, the white mark disk that you see to the right of the red knob is made of highly resistant Delrin thermoplastic. It can be written on with non-permanent markers to mark up focus measurements for various predetermined shots, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. The Clic is CNC machined and made of lightweight anodized aluminum for strength and durability. Designed to attach onto standard 15mm rods. Attaches onto the rods via a patented clamp system. The focus mechanism moves horizontally to adjust to the lens. The focus mechanism can be used on the left or right side of the lens. A friction wheel and a gear wheel are included to interchange as the focus disk. The focus disk flips to the rear of the focus mechanism to accommodate longer lenses. A thermoplastic mark disk can be written on with non-permanent markers and is interchangeable. An included marker attaches beside the mark disk and slides and tightens into positions along the disk. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Compatible Support Series Composite Cameleon Sumo Spider Off-Set Bracket for Blackmagic Cage The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. 15mm Aluminum Rods (Pair, 12") This pair of Shape 15mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Top Plate Extendable Handle for Select RED Cinema Cameras

Shape SH-RWTPH (SH_RWTPH, SHRWTPH, SH/RWTPH, SH RWTPH) Top Plate Extendable Handle for Select RED Cinema Cameras The Top Handle and Top Plate are designed to give you a solid and comfortable grip for the manipulation of your RED camera. The handle grip frame is made from robust CNC machined aluminium and the finger grip is made from genuine Canadian maple wood for maximum comfort. You can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your camera to your lens type. The centre of the Top Plate is designed to perfectly insert and mount the Top Handle that you can strongly attach with an Allen Key. The plate is specifically designed to be strongly attached with (4) Four 1/4-20 stainless screws at the top of the RED DSMC2, EPIC WEAPON, SCARLET WEAPON, RAVEN. All Shape products and accessories are covered by a lifetime manufacturer's warranty solely on CNC machined parts unless otherwise stated. Removable and robust top plate with ergonomic and extendable top handle Compatible with RED’s DSMC2 (MONSTRO, HELIUM, GEMINI), EPIC, SCARLET, RAVEN, DRAGON.  

Shape Pro Bundle Rig for RED WEAPON EPIC-W, SCARLET-W, and RAVEN Cameras

Shape SH-RWBR (SH_RWBR, SHRWBR, SH/RWBR, SH RWBR) Pro Bundle Rig for RED WEAPON EPIC-W, SCARLET-W, and RAVEN Cameras The perfect camera accessories for the manipulation of your RED camera. Compatible with RED’s DSMC2 (MONSTRO, HELIUM, GEMINI), RAVEN. Removable, ergonomic and robust top plate & extendable top handle with EVF mount. The Top Handle and Top Plate are designed to give you a solid and comfortable grip for the manipulation of your RED camera. The handle grip frame is made from robust CNC machined aluminium and the finger grip is made from genuine Canadian maple wood for maximum comfort. You can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your camera to your lens type. The centre of the Top Plate is designed to perfectly insert and mount the Top Handle that you can strongly attach with an Allen Key. The plate is specifically designed to be strongly attached with (4) Four 1/4-20 stainless screws at the top of the RED Weapon, RED Epic-Weapon, RED Scarlet-Weapon and RED Raven (Not compatible with the RED Dragon, Epic and Scarlet because of their bolt pattern and fan position).

Shape Complete Rig System for RED WEAPON EPIC-W, SCARLET-W, and RAVEN Cameras

Shape SH-RWKS (SH_RWKS, SHRWKS, SH/RWKS, SH RWKS) Complete Rig System for RED WEAPON EPIC-W, SCARLET-W, and RAVEN Cameras The ultimate camera support for your RED camera. Compatible with RED’s DSMC2 (MONSTRO, HELIUM, GEMINI), EPIC, SCARLET, RAVEN, DRAGON; Removable, ergonomic and robust top plate & extendable top handle with EVF mount. The Top Handle and Top Plate are designed to give you a solid and comfortable grip for the manipulation of your RED camera. The handle grip frame is made from robust CNC machined aluminium and the finger grip is made from genuine Canadian maple wood for maximum comfort. You can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your camera to your lens type. The centre of the Top Plate is designed to perfectly insert and mount the Top Handle that you can strongly attach with an Allen Key. The plate is specifically designed to be strongly attached with four 1/4-20 stainless screws at the top of the RED DSMC2, EPIC WEAPON, SCARLET WEAPON, RAVEN.

Shape 3/8"-16 Push Button Arm (4-Axis)

Shape SH-R384A (SH_R384A, SHR384A, SH/R384A, SH R384A) 3/8"-16 Push Button Arm (4-Axis) Increased stability and manoeuvrability of your camera rig with the Shape 4 axis push button magic arm with 3/8-16 mounting screw. Perfect for the Manipulation of Your On-Board Monitor The Shape Push Button Arm is the perfect device to mount your monitor to your camera rig. It allows precise and quick adjustments of your camera monitor with the help of the push button technology. Support Arm with 4 Axis Push Button System SHAPE is well known for its Push Button Handles, now used by so many professionals in the industry. This patented technology allows the user to make quick and easy adjustment by simply pressing the button. Doing so, you are allowed 360 degrees of rotation to place the handle in the best position for your use. On this device, the camera support arm features 4 Push Buttons, allowing you to make vertical and horizontal positioning adjustments of the camera accessory from the top or the bottom of the arm. Fixed Arm’s Length of 6.5’’ (16.51 cm) Not too long to maximize strength but just enough to allow a comfortable manipulation of your camera accessories. Quickly Mount or Unmount Camera Accessories to the Arm The arm can be used for supporting accessories such as a monitor, a view finder, a microphone, a camera light, etc. The 1/4-20 screw is mounted with a ‘bracket’ allowing you to manually fix the accessories to the arm without a tool. Quickly Attach the Arm to Your Rig The bottom section of the device features a 3/8-16 screw allowing you to easily mount or unmount the arm to your camera rig. Locking Stoppers The bottom section features 2 stoppers (ARRI compatible locking attachment mechanism) to strongly fix the magic arm to the camera. Lightweight & Robust The device weight is only 0.2 kg (0.45 lb) and is made from hard anodized aluminium with stainless steel screws to prevent rusting.

Shape 4-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw

Shape SH-RPB4A (SH_RPB4A, SHRPB4A, SH/RPB4A, SH RPB4A) 4-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw Providing push button adjustment, the SHAPE 4-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw allows you to quickly mount this accessory support arm to a 1/4"-20 threaded mounting hole. You mount your 1/4"-20 accessory to the top of the arm, which features a small mounting platform with rubberized surface. The D-ring assembly enables you to securely tighten down the screw without using tools. The arm is 6.5" long and features slotted D-rings mounting screws enabling you to either use a slotted screwdriver to tighten the screws, or finger-tighten using the D-ring. The push button adjustment allows you to tilt the mounting platform forward or backward, and another push button provides you with pan adjustment to position your accessory just how you want it. This arrangement doesn't require you to stress, strain, or worry when loosening or tightening the central lock-down arm common to most accessory arms. Additionally, each push button only controls one axis, so you don't have to worry about your arm collapsing when you make an adjustment.

Shape Dual-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw

Shape SH-RPB2A (SHRPB2A, SH/RPB2A, SH RPB2A, RPB2A, sh-rpb2a) Dual-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw Providing push button adjustment, the SHAPE Dual-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw allows you to quickly mount this accessory support arm to a 1/4"-20 threaded mounting hole. You mount your 1/4"-20 accessory to the top of the arm, which features a small mounting platform with rubberized surface. The D-ring assembly enables you to securely tighten down the screw without using tools. The arm is 3.5" long and features slotted D-rings mounting screws enabling you to either use a slotted screwdriver to tighten the screws, or finger-tighten using the D-ring. The push button adjustment allows you to tilt the mounting platform forward or backward, and another push button provides you with pan adjustment to position your accessory just how you want it. This arrangement doesn't require you to stress, strain, or worry when loosening or tightening the central lock-down arm common to most accessory arms. Additionally, each push button only controls one axis, so you don't have to worry about your arm collapsing when you make an adjustment.

Shape Revolt Sliding Dovetail Riser

Shape SH-RSDR (SHRSDR, SH/RSDR, SH RSDR, RSDR, sh-rsdr) Revolt Sliding Dovetail Riser Mount your camera to the SHAPE Revolt Sliding Dovetail Riser for precise tripod balancing and 15mm LWS accessory compatibility. The long plate design can compensate for short or long camera lengths, and it slides to further compensate for interchangeable lenses or other accessories mounted on the camera. The bottom of the baseplate has 1/4"-20 and 3/8"-16 threaded holes for compatibility with most video fluid heads. At the front, a 15mm rod clamp secures the two included rods for accessory mounting. Equipment such as follow focuses, lens supports, drive motors, and matte boxes can be attached to build up your rig. The levers on the baseplate are spring-loaded, so they can be optimally rotated for tightening and loosening bolts. Safety catches on adjustable surfaces have been implemented to prevent the camera from accidentally falling during adjustment. Sliding Plate with Locking Lever Disengage the lever at the side of the baseplate to find the center of gravity for precise balancing. Height-Adjustable Rod Clamp Adjust the height of the rod clamp to ensure that your rod-mounted accessories line up with your camera's optical center.

Shape REVOLT Bridgeplate with Sliding Dovetail Riser

Shape SH-RSB15 (SH_RSB15, SHRSB15, SH/RSB15, SH RSB15) REVOLT Bridgeplate with Sliding Dovetail Riser The REVOLT Bridgeplate from SHAPE allows you to quickly mount your camera on a tripod instead of your shoulder. It also provides a robust support to your camera rig. The bridgeplate features a sliding dovetail riser that can be directly attached to the ARRI Amira camera. An easily accessible locking lever on the side of the bridgeplate allows you to adjust and fix the camera rig's position onto the tripod. Furthermore, the included quick-release safety pins prevent the upper plate from sliding. The bridgeplate features 1/4"-20 and 3/8"-16 threaded holes at the base for tripod attachment.

Shape REVOLT VCT Universal Baseplate with Wooden Handle Grips

Shape SH-BPW14 (SH_BPW14, SHBPW14, SH/BPW14, SH BPW14) REVOLT VCT Universal Baseplate with Wooden Handle Grips When the Revolt VCT Universal Baseplate is combined with SHAPE’s Canadian maple wooden handle grips, it results in the most robust and comfortable camera support when you are shooting for long hours. Front to Back Sliding Plate Providing you with quick positioning of your camera accessories for an optimal adjustment of your camera’s centre of gravity and weight distribution. Match your camera’s optical centre Focal length is probably the most important factor when distinguishing one lens from another. Being able to adjust the height of your rod bloc to match your camera’s optical centre is exactly what you can do with the Revolt Universal Baseplate. Front and rear rod bloc Two 15 mm lightweight rod blocs can be fixed to the front and rear of the Baseplate, allowing you to install more camera accessories. Safety Pins and Ratchet knobs The Revolt VCT Universal Baseplate is built from robust components to prevent the plate from sliding, to secure the rods and to increase the strength of your rig. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The safety pins are located in strategic areas to maximize stabilization. Robust and easy to use, the safety pins prevent the upper plate from sliding. Soft & Ergonomic Shoulder Mount The shoulder Mount Support for the Revolt produces maximum comfort and stability; thanks to its gel padding, its softness and ergonomic shape, its thickness and slip-free material. Sophisticated tool box Quick access to your extra screws and Allen Key can be a time saver, even more so, when you are in the middle of a shoot. The REVOLT is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored. There is also a magnet at the back to attach your Allen Key. Compatible with the following cameras, ARRI (Amira and Alexa Mini), SONY (FS7, FS7M2, F5, F55, EX1, EX3), CANON (C300, C300M2, C700), RED SERIES, PANASONIC (Panasonic Cinema Varicam Lt 4k S35, Panasonic Ag-af100, Panasonic Ag-af101 Varicam Lt, Panasonic P2), BLACKMAGIC (Blackmagic Ursa Mini) and many other camera models with Interchangeable Lenses. Made of Canadian Maple Hardwood The wooden hand grip will give a natural touch to your rig and is designed with an ergonomic surface to add more comfort when you are shooting for long hours. The camera handgrip is made of Canadian maple hardwood and a high quality varnish top-coat to provide more durability. Push-Button System SHAPE is well known for its red push button handle, now used by so many professionals in the industry. They developed this patented technology to give users quick and easy adjustment. By simply pressing the red button, you are allowed a 360 degree rotation to place the handle in the best position for your use. Ratchet Knobs adjustments The handle offers two points of adjustment allowing 360° rotating positions for an optimal user comfort. Compatible with ARRI Rosettes Standard The Camera Handle is compatible with any camera rig with standard ARRI rosettes. Perfect to be fixed on the ARRI Alexa, the ARRI Amira cameras, or all others based on ARRI standard rosettes and screws with a red ratchet knob.

Shape REVOLT VCT Universal Baseplate with Follow Focus & Matte Box Pro Kit

Shape SH-BP15 (SH_BP15, SHBP15, SH/BP15, SH BP15) REVOLT VCT Universal Baseplate with Follow Focus & Matte Box Pro Kit  The Revolt VCT Universal baseplate offers a unique design, created for both amateur and professional filmmakers seeking camera stabilizers & supports of high quality. This bundle includes a perfect combination of SHAPE’s universal baseplate with SHAPE’s patented push button technology telescopic handles, a 2-stage matte box and a sophisticated follow focus pro system. Front to Back Sliding Plate Providing you with quick positioning of your camera accessories for an optimal adjustment of your camera’s centre of gravity and weight distribution. Match your camera’s optical centre Focal length is probably the most important factor when distinguishing one lens from another. Being able to adjust the height of your rod bloc to match your camera’s optical centre is exactly what you can do with the Revolt Universal Baseplate. Front and rear rod bloc Two 15 mm lightweight rod blocs can be fixed to the front and rear of the Baseplate, allowing you to install more camera accessories. Safety Pins and Ratchet knobs The Revolt VCT Universal Baseplate is built from robust components to prevent the plate from sliding, to secure the rods and to increase the strength of your rig. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The safety pins are located in strategic areas to maximize stabilization. Robust and easy to use, the safety pins prevent the upper plate from sliding. Soft & Ergonomic Shoulder Mount The shoulder Mount Support for the REVOLT produces maximum comfort and stability; thanks to its gel padding, its softness and ergonomic SHAPE, its thickness and slip-free material. Sophisticated tool box Quick access to your extra screws and Allen Key can be a time saver, even more so, when you are in the middle of a shoot. The REVOLT is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored. There is also a magnet at the back to attach your Allen Key. Baseplate Compatible with the following cameras, ARRI (Amira and Alexa Mini), SONY (FS7, FS7M2, F5, F55, EX1, EX3), CANON (C300, C300M2, C700), RED SERIES, PANASONIC (Panasonic Cinema Varicam Lt 4k S35, Panasonic Ag-af100, Panasonic Ag-af101 Varicam Lt, Panasonic P2), BLACKMAGIC (Blackmagic Ursa Mini) and many other camera models with Interchangeable Lenses. Telescopic Handles with Rubber Handgrips The black Telescopic Handles are left and right rubber handgrips that can be attached to cameras and camera support rig that has standard ARRI rosettes. Each arm features (4) four points of articulation: (2) Push-button system to optimize your rig support and manipulation and (2) Ratchet Knobs System allowing 360° rotating positions and 1.5" extension length to adjust the arms for your comfort. Push-Button System facilitate manipulation Each handle features two Push-button System. SHAPE is well known for its Push-button handle, now used by so many professionals in the industry. SHAPE developed this patented technology to give users quick and easy adjustment. By simply pressing the red button, you are allowed a 360 degree rotation to place the handle in the best position for your use. Ratchet Knobs adjustments Each handle features two points of adjustment allowing 360° rotating positions for an optimal user comfort. Compatible with ARRI Rosettes Standard The Camera Handle is compatible with any camera rig with standard ARRI rosettes. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. Pull focus on any type of project The Follow Focus Pro is perfect for use with film and cine-style lenses. It’s an industry workhorse and has already proven itself on countless tough shoots all over the world. Snap-on unit adaptor for 15 mm rods The Follow Focus Pro is designed with a ‘Snap-on unit adaptor for 15 mm rods’ to meet your particular camera rig requirements and adjustments. Reliable build quality. Your pictures will stay sharp Manufactured in sleek black anodized aluminium, it is made from robust CNC Machined Aluminium. SHAPE engineering is internationally renowned and the Follow Focus Pro is one of the most robust motion picture accessories ever built. The Gear Arm is reversible and two gear wheels are supplied to accommodate a wide range of lens barrel sizes 0.8 mm pitch (28 and 43 teeth aluminium gear). There is also a choice of two different focusing methods (Standard or Hard Stop) for an accurate adjustment on set. Matte Box 4X5.6 The SHAPE Matte Box 4X5.6 is a 2-Stage Matte Box designed for light control and adjustment of filters. It is compatible with various photo lenses with at least 52 mm diameter, but can also fit professional video optics with up to 114 mm front diameter. The mounting of the Matte Box is done via a ‘15 mm Clip-on rods system bracket’. There is also 360 Degrees of rotation offered by the filter holders.  

Shape REVOLT VCT Universal Baseplate with Telescopic Handles

Shape SH-BP12 (SH_BP12, SHBP12, SH/BP12, SH BP12) REVOLT VCT Universal Baseplate with Telescopic Handles The REVOLT VCT Universal Baseplate with Telescopic Handles from SHAPE is a camera support system for shoulder-mounted and handheld shooting. It includes the REVOLT VCT universal baseplate and dual telescopic handgrips with ARRI rosettes. The baseplate comes integrated with a shoulder mount, one pair of 8" standard 15mm rods, and one pair of 4" standard 15mm rods. The camera can be attached via 1/4"-20 or 3/8"-16 screws to the top plate. The sliding baseplate provides a quick positioning of your camera and accessories, for an optimal adjustment of your camera's balance center. The left and right handgrips attach to the sides of the baseplate via standard ARRI rosettes. REVOLT VCT Universal Baseplate Featuring a sliding camera plate, SHAPE's REVOLT VCT Universal Baseplate can accommodate rigs of varying sizes. Simply attach your camera via 1/4"-20 or 3/8"-16 screws to the top plate, and slide it onto the shoulder plate. Fore and aft movement allows you to balance the weight of your setup properly. Further adjustments can be made by moving the shoulder pad. The 15mm rod clamps at the front and rear of the baseplate allow you to secure 15mm accessories such as a matte box, follow focus, lens motors, lens supports, battery plates, or external recorders. Since the front rod clamp is attached to the top plate, the rod-mounted accessories don't need to be repositioned as the rig is adjusted. Additionally, handles can be mounted to the ARRI standard rosettes on either side of the plate. When not shoulder-mounted, the baseplate can be secured to a standard VCT-14 ENG quick release in a matter of seconds, saving time on set. The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center. Height-adjustable rod clamp for aligning the 15mm rods at the proper LWS height in relation to the optical axis. Front and rear rod clamps allow you to extend your rig forwards and backwards. Built-in storage areas for extra screws and the Allen wrench ensure that necessary adjustment tools are always close at hand. Safety pins and spring-loaded levers prevent the top plate from sliding unintentionally. Soft and ergonomic shoulder pad. Telescopic Handles with ARRI Rosettes (Black) The black Telescopic Handles with ARRI Rosettes from SHAPE are left and right handgrips that can be attached to cameras and camera support hardware that has standard ARRI rosettes. Each arm features three points of articulation, combined with the approximately two inches of arm extension allows you to adjust the arms for your comfort. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place without having a full 360° of rotation. Shape's unique push-button articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. A second spring-loaded locking lever along the arms allows you to extend the arms up to two inches and rotate the handgrips throughout 360°. The arms are indexed for extension and rotation, so you can quickly move between known setups. The push-button locking joint enables independent rotation throughout 360°. Spring-loaded locking levers allow you to tighten or loosen the lever even when you do not have space to turn the lever throughout the entire 360° range. The arms feature two inches of extension and are indexed every 5mm of extension. The arms can rotate through 360° and feature 30° of index markings.    

Shape REVOLT VCT Universal Baseplate

Shape SH-BP10 (SH_BP10, SHBP10, SH/BP10, SH BP10) REVOLT VCT Universal Baseplate Featuring a sliding camera plate, SHAPE's REVOLT VCT Universal Baseplate can accommodate rigs of varying sizes. Simply attach your camera via 1/4"-20 or 3/8"-16 screws to the top plate, and slide it onto the shoulder plate. Fore and aft movement allows you to balance the weight of your setup properly. Further adjustments can be made by moving the shoulder pad. The 15mm rod clamps at the front and rear of the baseplate allow you to secure 15mm accessories such as a matte box, follow focus, lens motors, lens supports, battery plates, or external recorders. Since the front rod clamp is attached to the top plate, the rod-mounted accessories don't need to be repositioned as the rig is adjusted. Additionally, handles can be mounted to the ARRI standard rosettes on either side of the plate. When not shoulder-mounted, the baseplate can be secured to a standard VCT-14 ENG quick release in a matter of seconds, saving time on set. The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center. Height-adjustable rod clamp for aligning the 15mm rods at the proper LWS height in relation to the optical axis. Front and rear rod clamps allow you to extend your rig forwards and backwards. Built-in storage areas for extra screws and the Allen wrench ensure that necessary adjustment tools are always close at hand. Safety pins and spring-loaded levers prevent the top plate from sliding unintentionally. Soft and ergonomic shoulder pad.

Shape VCT Universal Baseplate Arri Rosette

Shape SH-BPVCT (SH_BPVCT, SHBPVCT, SH/BPVCT, SH BPVCT) VCT Universal Baseplate Arri Rosette This baseplate is designed to provide balance and comfort for every camera and should be used with cameras with external viewfinders. The SHAPE VCT UNIVERSAL BASEPLATE ARRI ROSETTE features a V-lock delta adapter at the bottom of base plate, a removable Velcro shoulder pad, 1 ratchet knob to secure both rods, 15mm (8’’) rods at the front and (4’’) rods at the back, and threaded holes (1/4-20 & 3/8-16) to fix your accessories. 

Shape Quick Handle Rod Bloc and Grip Relocator Kit for Canon C Series Cameras

Shape SH-HANDCS (SHHANDCS, SH/HANDCS, SH HANDCS, HANDCS, sh-handcs) Quick Handle Rod Bloc and Grip Relocator Kit for Canon C Series Cameras This bundle combines the unique SHAPE quick handle with our exclusive Canon C series RELOCATOR cable. Perfect for benefiting from the red push-button technology with Canon C100/C300/C500 cameras. This ready to use assortment allow users to control the record trigger, menu, power on/off and several other options on the Canon C series cameras. The SHAPE rubber hand grip is made of robust and non-slip rubber, allowing the user to manipulate it with confidence and precision.   Compatible with all 15mm rod systems, placed in front of any type of camera support for the Canon C series, the SHAPE QUICK HANDLE ROD BLOC features a stainless steel locking mechanism for more durability.The user can achieve precise positioning by sliding the SHAPE QUICK HANDLE ROD BLOC along the rods and secure the handles by tightening the single red knob on the ROD BLOC. All CNC machined, high-quality aircraft grade aluminum parts are hard anodised for a resistant finish and assembled with stainless steel screws to prevent rusting.

Shape Canon C-Series Grip Relocator Inc. Extension Cable

Shape SH-HAC300-RE (SHHAC300-RE, SH/HAC300-RE, SH HAC300-RE, HAC300-RE, sh-hac300-re) Canon C-Series Grip Relocator Inc. Extension Cable The unique design of the C-300 bracket allows the user to remove the C-300 handle from the camera body in order to use with the ball and socket part of SHAPE DOUBLE QUICK HANDLE ROSETTE. By removing the rubber handle off the DOUBLE QUICK HANDLE ROSETTE, you can insert the C-300 bracket and secure it by tightening it with an Allan Key. When installed on the handle, the user has access to several functions available on the C300 handle such as; trigger on/off control, zoom, main menu, lens aperture control and many more! The user also has access to the unique SHAPE red-push button technology that can rotate individually on a 360 degree axis.

Shape Canon C100 C300 C500 Bracket

Shape SH-HAC300 (SHHAC300, SH/HAC300, SH HAC300, HAC300, sh-hac300) Canon C100 C300 C500 Bracket The Shape C300 Bracket for the C300 Handle serves to connect Shape's C300 Handle onto a rig. The Bracket is threaded on one end for the Handle to screw on, and with the other end it mounts a rig. A screw comes included to tighten the Bracket onto the rig.

Shape Composite C300 Camera Support Bundle

Shape SH-COMPOC300 (SHCOMPOC300, SH/COMPOC300, SH COMPOC300, COMPOC300, sh-compoc300) Composite C300 Camera Support Bundle The Composite C300 Camera Support Bundle from SHAPE is designed for use with the Canon C300, but it's also ideal for DSLRs and video cameras. It features no-tool assembly, and very fast transition from shoulder-mounted to tripod, and back. The camera is centered in front of your eyes, facilitating the use of the camera's viewfinder while shooting. The included Paparazzi Riser makes it possible to offset your camera to the left or the right, and the Telescopic Support Arm and Rod Bloc delivers improved stability and maneuverability. A Friction & Gear Follow-Focus with Adjustable Marker Standard is also included. 15mm rods can be used for mounting mics, lights, and other accessories. The high-quality aluminum parts are hard anodized to provide a durable rig. The Composite C300 is a nimble, highly capable support rig that will always help you get the shot you need.

Shape Push-Button Viewfinder Mount for Canon C200 Cinema Camera

Shape SH-C2VVF (SHC2VVF, SH/C2VVF, SH C2VVF, C2VVF, sh-c2vvf) Push-Button Viewfinder Mount for Canon C200 Cinema Camera The Push-Button Viewfinder Mount from SHAPE is compatible with the Canon C200 camera. The mount is designed with an L-bracket with two ratchet knobs for quick mounting and adjustment. It features three points of articulation with SHAPE patented push-button design allowing horizontal, vertical, and transversal adjustment of your viewfinder. The viewfinder can be secured to the bracket with a captive screw, and three 1/4"-20 threaded holes provide additional mounting options.

Shape Top Handle EVF Mount for Canon C200 Camera

Shape SH-C2HVF (SH-C2HVF, SH-C2HVF, SH-C2HVF, C2HVF, sh-c2hvf) Top Handle EVF Mount for Canon C200 Camera The handle grip frame is made from robust CNC machined aluminum and the finger grip is made from genuine Canadian maple wood for maximum comfort. You can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your camera to your lens type The View Finder Bracket Arm can quickly be mounted to the Canon C200 Top Plate with the help of a Ratchet Knob. The position of the View finder can also be adjusted to your need with the  Lightweight and robust CNC machined aluminum plate designed to support and facilitate the manipulation of your Canon C200. The top plate offers an array of 1/4" and 3/8" threads which can be used to attach options around the camera, for example, our top handle and EVF mount bracket (also compatible with Canon’s C200 original top handle).

Shape Canon C200 Shoulder Mount System

Shape SH-C200SM (SHC200SM, SH/C200SM, SH C200SM, C200SM, sh-c200sm) Canon C200 Shoulder Mount System The Shoulder Mount System from SHAPE is a shoulder rig system with lightweight support (LWS) for the Canon C200 camera. It includes one B15C200 Baseplate, one HAND5 Quick Handle with Rod Block, one Mini Composite Shoulder Pad, two 15mm Aluminum Rods (18"), and one Back Pad. The Baseplate features four attachment points for securely mounting the C200. It includes a pair of 15mm rods that are 18” long and run through the length of the baseplate. The Quick Handle with Rod Block is a professional video stabilization accessory with two camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A push button located at the articulation allows for easy attachment and removal. The Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm Rod Block mount, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a lever. The Back Pad is a standard rig component included with most SHAPE camera rigs. Its design features a powder-coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. Baseplate with 15mm Rod System for Canon C200 Camera The SHAPE Baseplate is designed for use with the Canon C200 camera. It comes with a pair of 15mm rods that are 12" long through the length of the baseplate. The baseplate features three attachment points for securing your camera and tripod plate attachment via three 1/4"-20 mounting holes. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally.

Shape Grip Relocator for Canon EOS C200

Shape SH-HAC200RE (SHHAC200RE, SH/HAC200RE, SH HAC200RE, HAC200RE, sh-hac200re) Grip Relocator for Canon EOS C200 The Grip Relocator from SHAPE is a remote extension handle that gives you flexibility in the manipulation of the Canon C200 camera. It is compatible with ARRI rosettes and features Shape's red push button technology. This technology enables you to get a 360-degree rotation and place the handle in the any position by the press of a button.

Shape Remote Extension Handle with Cable for Canon C200

Shape SH-C200RH (SHC200RH, SH/C200RH, SH C200RH, C200RH, sh-c200rh) Remote Extension Handle with Cable for Canon C200 The Canon C200 remote extension handle from SHAPE offers an adjustable arm extension for the side hand grip provided with the Canon C200. It features SHAPE's patented Push-button Technology for easy angle adjustment and 360 degree rotation. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm.

Shape C200 Canon Camera Bundle Rig with Follow Focus Pro & 4 x 5.6" Matte Box

Shape SH-C2KIT (SHC2KIT, SH/C2KIT, SH C2KIT, C2KIT, sh-c2kit) C200 Canon Camera Bundle Rig with Follow Focus Pro & 4 x 5.6" Matte Box The SHAPE Canon C200 Camera Bundle Rig is a support system suitable for both handheld or shoulder-mounted shooting. It includes the BP0008 V-Lock Quick Release Baseplate with a pair each of 8" and 4" 15mm aluminum rods, the V-Lock Replacement Pad, one HAND3 Telescopic Handle for ARRI Rosette, the Two-Stage 4 x 5.6" Matte Box, and one Follow Focus Pro. The BP0008 V-Lock Quick Release Baseplate is a long-format baseplate for larger cameras like the ALEXA, F5, C300, and broadcast cameras. It can be used shoulder or tripod-mounted, or attached to V-Lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-Lock Delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures via touch fasteners. The tripod mount threads are located underneath the shoulder pad. Both 8" and 4" 15mm rods are included for the front and back. The Two-Stage 4 x 5.6" Matte Box can be used as a clip-on, or can be mounted on an industry standard 15mm rod system. The Telescopic Handle is indexed for extension and rotation, so you can quickly move between setups. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers. The rotating capability allows it to be adjusted for left and right-handed use. The arm features three points of articulation—one ratchet knob and two push button systems. A spring-loaded locking lever allows you to extend the arms up to 1.5" and rotate the handgrips throughout 360°. By simply pressing the button, you can achieve 360° rotation to place the handle in the required position for your use. The push button system on the handle articulating joint provides additional articulation near the rosette, while a second push button articulation joint allows you to rotate and precisely position the handgrips. The Follow Focus Pro is suitable for use with film and cine-style lenses. It is designed with a snap-on unit adapter for 15mm rods to meet your camera rig requirements and adjustments. The unit sports a sleek black anodized finish and is made of robust CNC Machined aluminum. The Gear Arm is reversible, and two gear wheels are supplied to accommodate a wide range of lens barrel sizes with 0.8mm pitch (28 and 43-teeth aluminum gear). There is also a choice of two different focusing methods (standard or hard stop) for accurate adjustment on the set. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. V-Lock Replacement Pad The V-Lock Replacement Pad from SHAPE is a replacement shoulder pad for the V-lock system BP6000 and  BP7000. The pad utilizes a hook-and-loop system which allows for easy attachment and removal. The additional padding provided by the strap increases user comfort and reduces strain on the shoulder. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig. 2-Stage 4 x 5.6" Matte Box The 2-Stage 4 x 5.6" Matte Box from SHAPE can be used as a clip-on matte box or can be mounted on industry-standard 15mm rod system. It is designed for light control, insertion, and adjustment of filters. It features a two-stage rotating 4 x 5.6" filter holder. The matte box accepts lenses with a front diameter up to 114mm. It comes with six step-down rings that allow you to fit lenses with an outer diameter of 52, 58, 62, 67, 72, 77, and 82mm as well. Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.

Shape Bundle Rig with Follow Focus Pro for Canon EOS C200

Shape SH-C2BRFFP (SHC2BRFFP, SH/C2BRFFP, SH C2BRFFP, C2BRFFP, sh-c2brffp) Bundle Rig with Follow Focus Pro for Canon EOS C200 The SHAPE Bundle Rig with Follow Focus Pro is a camera support system designed for the Canon EOS C200, suitable for both handheld and shoulder-mounted shooting. It includes the BP0008 V-Lock Quick Release Baseplate, one V-Lock Replacement Pad, the HAND3 Telescopic Handle for ARRI Rosette, the Follow Focus Pro, and a pair each 8" and 4" 15mm aluminum rods. The long-format V-Lock Quick Release Baseplate is designed for larger cameras like the ARRI ALEXA, Sony PMW-F5, Canon C300, and broadcast cameras. It can be used shoulder or tripod-mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock Delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. A pair each of 8" and 4" 15mm aluminum rods are included for the front and back. The Telescopic Handle is indexed for extension and rotation, so you can quickly move between known setups. The arms attach to your camera or support via an ARRI-compatible rosette with spring-loaded locking levers, allowing you to lock your arms in place without having a full 360° of rotation. The rotating capability allows it to be adjusted for left and right-handed use. The arm features three points of articulation (one ratchet knob and two push-button systems). A spring-loaded locking lever along the arms allows you to extend the arms up to 1.5" and rotate the handgrips throughout 360°. The Follow Focus Pro is suitable for use with film and cine-style lenses. It is designed with a snap-on unit adapter for 15mm rods, to meet your camera rig requirements and adjustments. The unit sports a sleek black anodized finish and is made of robust CNC Machined aluminum. The gear arm is reversible, and two gear wheels are supplied to accommodate a wide range of lens barrels with .8mm pitch—28 and 43-tooth aluminum gear. A choice of two different focusing methods (standard or hard stop) allows for accurate adjustment on the set. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. V-Lock Replacement Pad The V-Lock Replacement Pad from SHAPE is a replacement shoulder pad for the V-lock system BP6000 and  BP7000. The pad utilizes a hook-and-loop system which allows for easy attachment and removal. The additional padding provided by the strap increases user comfort and reduces strain on the shoulder. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

Shape Canon C200 Camera Bundle Rig

Shape SH-C200BR (SHC200BR, SH C200BR, SH/C200BR, C200BR, sh-c200br) Canon C200 Camera Bundle Rig The SHAPE Canon C200 Camera Bundle Rig is a support system designed for the C200 cinema camera, and can be used for shoulder-mounted as well as handheld shooting. The system includes one Canon C200 Baseplate with a shoulder mount and 15mm rod system, one C200 Adapter Plate, and one Telescopic Handle with ARRI Rosette and push button technology. The Canon C200 Baseplate features a Quick Handle Grip compatible with all standard ARRI rosettes. The Adapter Plate is designed to be mounted at the bottom of the camera and lets you quickly attach your C200 camera to the Baseplate with a shoulder mount. Made of slip-free material, the shoulder pad offers ample comfort and stability. If you want to use the tripod option, the Baseplate also includes a delta plate and can be quickly mounted onto a VCT Tripod Plate. The Rod Bloc System of the Baseplate features two ratchet knob devices to adjust the length and height of your rods. The 15mm lightweight Rod Bloc can be fixed to the C200 Baseplate, allowing you to install additional camera accessories (8” rods at the front and 4” at the back). The Adapter Plate lets you quickly attach your Canon C200 camera to the Baseplate. The position of the captive screws matches the threaded holes on the base of the camera. The Telescopic Handle is indexed for extension and rotation, so you can quickly move between known setups. The arm attaches to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arm in place without having a full 360° of rotation. The rotating capability allows it to be adjusted for left and right-handed use. The arm features three points of articulation (one ratchet knob and two push button systems). A spring-loaded locking lever along the arm allows you to extend it up to 1.5". By pressing the button, you can achieve 360° rotation to place the handle in any required position. The push button system provides additional articulation near the rosette, while a second push button articulation joint allows you to rotate and precisely position the handgrip. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

Shape Cage Handle EVF Mount for Canon C200 Camera

Shape SH-C2EVFC (SHC2EVFC, SH/C2EVFC, SH C2EVFC, C2EVFC, sh-c2evfc) Cage Handle EVF Mount for Canon C200 Camera The handle grip frame is made from robust CNC machined aluminum and the finger grip is made from genuine Canadian maple wood for maximum comfort. The Canon c200 top handle is removable and you can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your Canon C200 to your lens type. The View Finder Bracket Arm can quickly be mounted to the Canon C200 Top Plate with the help of a Ratchet Knob.The position of the View finder can also be adjusted to your need with the help of the ratchet knob system and our patented Push Button Technology (nothing to unscrew - Push, adjust, release, and then its lock).

Shape Canon C200 Cage 15Mm Lw Base With Top Handle

Shape SH-C2ROD (SHC2ROD, SH/C2ROD, SH C2ROD, C2ROD, sh-c2rod) Canon C200 Cage 15Mm Lw Base With Top Handle The SHAPE 15mm Lightweight Rod System is designed for use with the Canon 200 cinema camera. The system includes the Canon C200 camera cage, a baseplate with Rod Bloc, an extendable top handle, and two 12" 15mm rods. The camera cage is designed for the Canon EOS C200. It is made of CNC Machined aluminum and offers several mounting points and threaded holes to attach other SHAPE parts and third-party accessories. The cage also includes an ARRI rosette on the right side for attaching the Remote Extension Handle or C200 Handle. The baseplate comes with a pair of 12" 15mm rods that run through its length. It features three attachment points for securing your camera and tripod plate attachment via three 1/4"-20 mounting holes. The handle grip frame is made of CNC Machined aluminum, and the finger grip is made of Canadian maple wood for maximum comfort. The Canon C200 top handle is removable and can be quickly adjusted and locked. The handle's length can be extended approximately 3" from its original position, to optimize the balance of your Canon C200 to your lens type. Camera Cage for Canon EOS C200 The SHAPE Camera Cage is designed for use with the Canon EOS C200 cinema camera. It is made of CNC Machined aluminum and offers several mounting points and threaded holes to attach other SHAPE parts and third-party accessories. The cage also includes an ARRI rosette on the right side for attaching the Remote Extension Handle or C200 Handle. Baseplate with 15mm Rod System for Canon C200 Camera The SHAPE Baseplate is designed for use with the Canon C200 camera. It comes with a pair of 15mm rods that are 12" long through the length of the baseplate. The baseplate features three attachment points for securing your camera and tripod plate attachment via three 1/4"-20 mounting holes. 15mm Aluminum Rods (Pair, 12") This pair of Shape 15mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Canon C200 Cage With Top Handle

Shape SH-C2THC (SHC2THC, SH/C2THC, SH C2THC, C2THC, sh-c2thc) Canon C200 Cage With Top Handle The SHAPE C200 Cage with Top Handle features a formfitting, four-sided cage for the Canon C200 camera and a top handle that attaches to a top plate on the cage. The cage offers numerous mounting threads all around including on the bottom, and a rosette adapter on the side. The top handle provides two shoe mounts and other mounting points, and is telescopically extendable by up to 2.5".

Shape Camera Cage for Canon EOS C200

Shape SH-C200CAGE (SHC200CAGE, SH/C200CAGE, SH C200CAGE, C200CAGE, sh-c200cage) Camera Cage for Canon EOS C200 The SHAPE Camera Cage is designed for use with the Canon EOS C200 cinema camera. It is made of CNC Machined aluminum and offers several mounting points and threaded holes to attach other SHAPE parts and third-party accessories. The cage also includes an ARRI rosette on the right side for attaching the Remote Extension Handle or C200 Handle.

Shape Sony FS7M2 V-Lock Quick-Release Baseplate

Shape SH-FS72BP (SHFS72BP, SH/FS72BP, SH FS72BP, FS72BP, sh-fs72bp) Sony FS7M2 V-Lock Quick-Release Baseplate With SHAPE's Sony FS7M2 V-Lock Quick Release Baseplate you can build a 15mm LWS rig around your FS7 or FS7M2 camera. The included 15mm rods enable you to mount a matte box, follow focus, lens support or other production accessory. Since the plate is designed for the FS7, correct lens height is ensured for correct accessory clearance. A rear insert plate is included to support the raised rear portion of the FS7 body, increasing the surface area of the camera base. The mounting points on the bottom of the baseplate itself can secure to a standard VCT-14 quick release tripod plate. When not locked down, the shoulder pad provides cushioned support for handheld shooting. Touch-fastener on the shoulder pad allows easy removal for cleaning or replacement. Further handheld options can be introduced using the rosettes towards the front of the baseplate. Separately available handgrips, like the SHAPE Telescoping Handles can be secured directly to the baseplate for increased stability. Separately available 15mm rods can also be attached at the rear of the plate using the 15mm Rod Bloc (also available separately).

Shape Sony FS7 II Base Plate Top Plate Follow Focus Pro

Shape SH-FS72FFP (SHFS72FFP, SH/FS72FFP, SH FS72FFP, FS72FFP, sh-fs72ffp) Sony FS7 II Base Plate Top Plate Follow Focus Pro Gear up your Sony PXW-FS7 or PXW-FS7M2 for cinema production with this Shoulder Rig Bundle from SHAPE. Comprised of SHAPE's V-Lock Quick-Release Baseplate, a telescoping handle with SHAPE's signature rubber grip and button-press adjustments, and a Follow Focus Pro for smooth focus pulls on lenses with 0.8 MOD gearing. The baseplate is the core of the kit, allowing for 15mm LWS accessories to be mounted, and clips right into a standard VCT-14 tripod plate. When not locked into a tripod, it functions as a cushioned shoulder mount. The included telescoping handle secures to one of the baseplate's rosettes and complements the FS7's existing handgrip for additional stability when handheld. For camera-top accessories, a top cheese plate is included. It fits around the existing top handle to retain all camera functionality. The included 4" rods can be mounted at the rear of the baseplate using the included 15mm rear rod clamp. See below for more information on the individual items included in this kit. Sony FS7M2 V-Lock Quick Release Baseplate With SHAPE's Sony FS7M2 V-Lock Quick Release Baseplate you can build a 15mm LWS rig around your FS7 or FS7M2 camera. The included 15mm rods enable you to mount a matte box, follow focus, lens support or other production accessory. Since the plate is designed for the FS7, correct lens height is ensured for correct accessory clearance. A rear insert plate is included to support the raised rear portion of the FS7 body, increasing the surface area of the camera base. The mounting points on the bottom of the baseplate itself can secure to a standard VCT-14 quick release tripod plate. When not locked down, the shoulder pad provides cushioned support for handheld shooting. Touch-fastener on the shoulder pad allows easy removal for cleaning or replacement. Further handheld options can be introduced using the rosettes towards the front of the baseplate. Separately available handgrips, like the SHAPE Telescoping Handles can be secured directly to the baseplate for increased stability. Separately available 15mm rods can also be attached at the rear of the plate using the 15mm Rod Bloc (also available separately). Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig. Top Plate for Sony FS7 Camera Use the top surface of your FS7 camcorder to mount accessories with this Top Plate from SHAPE. With multiple 1/4"-20 and 3/8"-16 tapped holes, this top plate will accept many standard accessories from magic arms to cold shoe adapters. The U-shape of the plate allows for the original camera handle to remain mounted while the non-flush design prevents over-tightened screws from puncturing the top of the camera casing. 15mm Aluminum Rods (Pair, 4") This pair of Shape 15mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.

Shape Sony FS7 II Rig Baseplate and Top Plate

Shape SH-FS72BT (SHFS72BT, SH/FS72BT, SH FS72BT, FS72BT, sh-fs72bt) Sony FS7 II Rig Baseplate and Top Plate Go handheld with your FS7 camera by attaching the SHAPE Sony FS7M2 Rig Baseplate and Top Plate. The baseplate has a comfortable shoulder pad and a VCT-14 quick-release for ENG tripod plates. The included handle fits right in the rosette for extra comfort and security when handheld. Extra accessory mounting options are offered via the top plate, with tapped 1/4"-20 and 3/8"-16 threads, great for articulating arms. For mounting batteries or other rod-based accessories at the rear of the camera, a rear rod block is included for securing 15mm rods. See below for more information on the items included in this kit. Sony FS7M2 V-Lock Quick Release Baseplate With SHAPE's Sony FS7M2 V-Lock Quick Release Baseplate you can build a 15mm LWS rig around your FS7 or FS7M2 camera. The included 15mm rods enable you to mount a matte box, follow focus, lens support or other production accessory. Since the plate is designed for the FS7, correct lens height is ensured for correct accessory clearance. A rear insert plate is included to support the raised rear portion of the FS7 body, increasing the surface area of the camera base. The mounting points on the bottom of the baseplate itself can secure to a standard VCT-14 quick release tripod plate. When not locked down, the shoulder pad provides cushioned support for handheld shooting. Touch-fastener on the shoulder pad allows easy removal for cleaning or replacement. Further handheld options can be introduced using the rosettes towards the front of the baseplate. Separately available handgrips, like the SHAPE Telescoping Handles can be secured directly to the baseplate for increased stability. Separately available 15mm rods can also be attached at the rear of the plate using the 15mm Rod Bloc (also available separately). Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig. 15mm Aluminum Rods (Pair, 4") This pair of Shape 15mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Top Plate for Sony FS7 Camera Use the top surface of your FS7 camcorder to mount accessories with this Top Plate from SHAPE. With multiple 1/4"-20 and 3/8"-16 tapped holes, this top plate will accept many standard accessories from magic arms to cold shoe adapters. The U-shape of the plate allows for the original camera handle to remain mounted while the non-flush design prevents over-tightened screws from puncturing the top of the camera casing.

Shape Sony FS7 Lightweight Plate and Top Plate

Shape SH-FS7LWTP (SHFS7LWTP, SH/FS7LWTP, SH FS7LWTP, FS7LWTP, sh-fs7lwtp) Sony FS7 Lightweight Plate and Top Plate The Sony FS7 Lightweight Plate and Top Plate from SHAPE expands the accessory support of your FS7 camera by outfitting it with a 15mm rod baseplate and a top plate with 1/4"-20 and 3/8"-16 threaded holes. The baseplate includes a pair of 8"-long 15mm rods for attaching optional accessories such as a follow focus and matte box, and its compact design leaves access to the camera's shoulder pad open. The baseplate also provides ARRI rosettes on each side for attaching the FS7's right handle and an optional left-sided rosette handle. A V-lock adapter on the underside of the baseplate allows the camera to be mounted on quick-release V-lock tripod plates. The Top Plate attaches around the FS7's top handle using a pair of supplied screws, providing 1/4"-20 and 3/8"-16 threads on top of the camera. This is useful for articulating arms to support external monitors and viewfinders, or mounting additional accessories. Sony FS7 Lightweight Plate The Sony FS7 Lightweight Plate from SHAPE is a fixed baseplate that provides 15mm LWS rod support without interfering with the camera's shoulder-mount design. A pair of 8" long 15mm rods is included for attaching optional accessories such as a follow focus and matte box. In addition to rod ports, the Lightweight Plate also features ARRI rosettes on each side for attaching the FS7's right handle and an optional left-sided rosette handle. On the underside of the baseplate is a V-lock delta adapter, allowing the baseplate to be mounted on V-lock quick-release tripod plates, such as the Panasonic SHAM-TM700 or Sony VCT14. The delta adapter is attached to a bottom door, which can be opened up to access 1/4"-20 and 3/8"-16 camera screws. Top Plate for Sony FS7 Camera Use the top surface of your FS7 camcorder to mount accessories with this Top Plate from SHAPE. With multiple 1/4"-20 and 3/8"-16 tapped holes, this top plate will accept many standard accessories from magic arms to cold shoe adapters. The U-shape of the plate allows for the original camera handle to remain mounted while the non-flush design prevents over-tightened screws from puncturing the top of the camera casing.

Shape Remote Extension Handle for Sony FS5 Camera

Shape SH-FS5RH (SHFS5RH, SH/FS5RH, SH FS5RH, FS5RH, sh-fs5rh) Remote Extension Handle for Sony FS5 Camera The Remote Extension Handle for Sony FS5/FS5M2 Camera from SHAPE is a variable-length adjustable handle designed to reposition the FS5 or FS5M2's remote grip away from the camera while retaining full remote functionality. The handle easily mounts to the FS5/FS5M2 using an ARRI style rosette connection and knob screw on one side, and a native Sony grip connection on the other. An included male to female LANC extension cable connects the remote grip to the camera body, maintaining full functionality after relocation. The arm itself features SHAPE's patented push-button release which allows the joint to be rotated a full 360° to any required angle. Compact for both storage and travel, the arm measures just 5.6" when folded and may be increased to a maximum length of 11" for use. A length adjustment range of 2" is also provided to the user for a more customized and comfortable fit.

Shape Viewfinder Solution for Sony FS5 Top Plate

Shape SH-FS5VF (SHFS5VF, SH/FS5VF, SH FS5VF, FS5VF, sh-fs5vf) Viewfinder Solution for Sony FS5 Top Plate To complete your setup of the top plate (FS5TP), we designed 2 rod clamps that can be mounted on the top plate for accessory options. We also designed a screen mount adapter to place on the rod so you can adjust the SONY LCD screen closer or farther away, according to your viewing needs.  The distance between the 2 rod clamps is standard 15mm LW system and the rods are positioned for the optical centre of the camera. Included with the rod clamps are a pair of 15mm 8inch rods. It’s perfect for drone and gimbal application, and is designed with a lightweight system for mounting any standard 15 mm accessories.

Shape Two-Part Top Plate Kit for Sony FS5 Camera

Shape SH-FS5TPKIT (SHFS5TPKIT, SH/FS5TPKIT, SH FS5TPKIT, FS5TPKIT, sh-fs5tpkit) Two-Part Top Plate Kit for Sony FS5 Camera For the top of the camera, we designed a two-part top plate. The plates include ¼-20 and 3/8-16 threaded holes for accessory attachment. We also designed a screen mount adapter with a rod clamp so you can adjust the SONY LCD screen closer or farther away, according to your viewing needs. You can place the screen in front, behind, at the left of the right of the camera. The rod clamp can be rotated 90 degrees for other rigging options. An additional rod clamp with a rod is included with the top plates and can be installed on the other side of the camera to attach other accessories. The distance between the 2 rod clamps is standard 15mm and the rods are positioned for the optical centre of the camera. We created the top plates to provide an easy access to the sensor reference pin. It’s very lightweight (70 g). Another feature of the top plate is that it can be installed on one side only if required as it comes in parts separated parts. The top plate includes 15mm 8inch rods. It’s perfect for drone and gimbal application, and it’s designed with lightweight system for mounting any standard 15 mm accessories. We proudly make our products in Canada, and we offer a lifetime warranty on all CNC machined parts. Our products are solid and durable.

Shape Bundle Rig and Follow Focus Pro Kit for Sony FS5 Camera

Shape SH-FS5BRFFP (SHFS5BRFFP, SH/FS5BRFFP, SH FS5BRFFP, FS5BRFFP, sh-fs5brffp) Bundle Rig and Follow Focus Pro Kit for Sony FS5 Camera The SHAPE Bundle Rig and Follow Focus Pro Kit comes with a baseplate, a Quick Handle Rod Block, a Mini Composite Shoulder Pad, a Composite Shoulder Pad, Follow Focus Pro, and 8" 15mm aluminum rods for use with the Sony PXW-FS5 or FS5M2 camera. The baseplate comes with rubber pads at the top so the FS5/FS5M2 doesn't sit directly on the aluminum. The baseplate fits 15mm standard rods which are secured with a red ratchet knob screw. A pair of 10" 15mm rods is included. It is ideal for drone and gimbal applications, and is designed with a lightweight system for mounting any standard 15mm accessories. The Quick Handle Rod Bloc is a professional video stabilization accessory with two camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. The Mini Composite Shoulder Pad is a padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm mount SHAPE Rod Bloc, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a lever. The Composite Shoulder Pad is a component of the SHAPE F3 Composite Support Rig, and is intended for use with larger sized cameras. The Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter its diameter. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and repositioning. Two 0.8 pitch gears come included and give you a choice of either 28 or 43 teeth, depending on the throw distance of the lens. The 8" 15mm aluminum rods connect to and extend your camera rig, allowing you to add various SHAPE and third-party compatible accessories. Baseplate for Sony FS5 and FS5M2 Cameras The SHAPE Baseplate comes with rubber pads at the top so the Sony PXW-FS5 or PXW-FS5M2 camera doesn't sit directly on the aluminum. The baseplate fits 15mm standard rods, which are secured with a red ratchet knob screw. A pair of 10" 15mm rods is included. The baseplate is ideal for drone and gimbal applications, and is designed with a lightweight system for mounting standard 15mm accessories. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks. 15mm Aluminum Rods (Pair, 8") This pair of Shape 15mm Aluminum Rods (8") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Sony FS5 Baseplate V-Lock Quick Release with Metabones Support

Shape SH-FS5BP (SH-FS5BP, SH-FS5BP, SH-FS5BP, FS5BP, sh-fs5bp) Sony FS5 Baseplate V-Lock Quick Release with Metabones Support The Sony FS5/FS5M2 Baseplate V-Lock Quick Release from SHAPE offers a lightweight and balanced solution on the shoulder. This baseplate features the BP0008 V-Lock Quick Release specifically adapted for the Sony FS5 and FS5M2 cameras. Its versatility allows you to adjust the front bracket's height easily, and switch the front rod bracket from 15mm lightweight to 15mm studio. It comes with a Metabones adapter plate in the front with a 3mm vertical adjustment for support. The FS5 Metabones adapter is suited to support weight and reduce stress on the camera lens mount. The ergonomic design is specifically made to help you shoot for long hours; providing comfort and balance. Made of solid anodized aluminum, the SHAPE BP0008 is a suitable fit for your Sony FS5 or FS5M2.

Shape Sony FS5 Bundle Rig With Metabones & Follow Focus Pro

Shape SH-FS5BASEFFP (SHFS5BASEFFP, SH/FS5BASEFFP, SH FS5BASEFFP, FS5BASEFFP, sh-fs5baseffp) Sony FS5 Bundle Rig With Metabones & Follow Focus Pro The Sony FS5/FS5M2 Baseplate Bundle Rig from SHAPE includes the BP0008 V-Lock Quick Release Baseplate, Follow Focus Pro, Telescopic Handle for ARRI Rosette, and the Sony PXW-FS5/FS5M2 Adapter Plate. The BP0008 V-Lock Quick Release Baseplate is a long-format baseplate for larger cameras like the ALEXA, F5, C300, and broadcast cameras. It can be used shoulder-mounted, tripod-mounted, or attached to V-Lock tripod adapters. The Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, regardless of the diameter. The unit snaps onto the rods, allowing for quick attachment, removal, and repositioning. The Telescopic Handle for ARRI Rosette is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles, to best meet your needs and preference. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig. Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

Shape Sony FS5 Bundle Rig With Metabones Adapter

Shape SH-FS5BR (SHFS5BR, SH/FS5BR, SH FS5BR, FS5BR, sh-fs5br) Sony FS5 Bundle Rig With Metabones Adapter The Sony FS5 Baseplate Bundle Rig from SHAPE includes the BP0008 V-Lock Quick Release Baseplate with 8" and 4" 15mm rods, the Telescopic Handle for ARRI Rosette, and the Sony PXW-FS5 Adapter Plate. The BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the ALEXA F5, Canon C300, and broadcast cameras. It can be used shoulder-mounted, tripod-mounted, or attached to V-Lock tripod adapters. The baseplate includes a pair each of 15mm 8" and 4" rods which extend your camera rig and let you add various SHAPE and third-party accessories. The Telescopic Handle for ARRI Rosette is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles, to best meet your needs and preference. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

Shape Baseplate Kit for Sony FS5 Camera

Shape SH-FS5BASEKIT (SHFS5BASEKIT, SH/FS5BASEKIT, SH FS5BASEKIT, FS5BASEKIT, sh-fs5basekit) Baseplate Kit for Sony FS5 Camera The SHAPE Baseplate Kit comes with a baseplate, a Two-Part Top Plate Kit, a remote extension handle, a pair of 8" aluminum rods, and a pair of 10" rods. The baseplate comes with rubber pads at the top so your Sony PXW-FS5 or FS5M2 camera doesn't sit directly on the aluminum. The baseplate fits 15mm standard rods, and the rods are secured with a red ratchet knob screw. The baseplate includes a pair of 15mm 10" rods. The Two-Part Top Plate includes 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The remote extension handle is fixed with a standard ARRI rosette that you can install on the camera. The handle is then secured with a ratchet knob screw on the rosette. The remote extension handle includes the red push button technology that allows the handle 360° of rotation. The 8" and 10" aluminum rods connect to your camera rig, extending it and letting you add various SHAPE and third-party compatible accessories. Baseplate for Sony FS5 and FS5M2 Cameras The SHAPE Baseplate comes with rubber pads at the top so the Sony PXW-FS5 or PXW-FS5M2 camera doesn't sit directly on the aluminum. The baseplate fits 15mm standard rods, which are secured with a red ratchet knob screw. A pair of 10" 15mm rods is included. The baseplate is ideal for drone and gimbal applications, and is designed with a lightweight system for mounting standard 15mm accessories. Remote Extension Handle for Sony FS5/FS5M2 Camera The Remote Extension Handle for Sony FS5/FS5M2 Camera from SHAPE is a variable-length adjustable handle designed to reposition the FS5 or FS5M2's remote grip away from the camera while retaining full remote functionality. The handle easily mounts to the FS5/FS5M2 using an ARRI style rosette connection and knob screw on one side, and a native Sony grip connection on the other. An included male to female LANC extension cable connects the remote grip to the camera body, maintaining full functionality after relocation. The arm itself features SHAPE's patented push-button release which allows the joint to be rotated a full 360° to any required angle. Compact for both storage and travel, the arm measures just 5.6" when folded and may be increased to a maximum length of 11" for use. A length adjustment range of 2" is also provided to the user for a more customized and comfortable fit. 15mm Aluminum Rods (Pair, 8") This pair of Shape 15mm Aluminum Rods (8") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Shape Shoulder Mount Kit with Matte Box and Follow Focus for Sony a7R III

Shape SH-A73SMKIT (SHA73SMKIT, SH/A73SMKIT, SH A73SMKIT, A73SMKIT, sh-a73smkit) Shoulder Mount Kit with Matte Box and Follow Focus for Sony a7R III The Shoulder Mount Kit with Matte Box and Follow Focus from SHAPE includes the components necessary for protecting and mounting the Sony a7R III or a7 III camera. Included in this kit is a formfitting ergonomic cage which protects the camera and features a horizontal 15mm rod clamp on both sides. It provides access to all controls and ports, as well as multiple attachment points for accessories. Included in the kit are a wooden push-button top handle with 15mm LW clamp, a quick release Delta rod base system, a Metabones adapter support bracket, a pair of 18" 15mm rods, a Quick Handle Rod Bloc, a mini composite shoulder pad and back pad, a follow focus friction and gear clic system with adjustable marker, and a 4 x 4" matte box. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Friction & Gear Follow-Focus Clic with Adjustable Marker The Shape Friction & Gear Follow-Focus Clic with Adjustable Marker is designed to attach onto standard 15mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic atop the rods, and then slide and close a Shape-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods. The Clic's focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature -- the focus disk -- moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism, as you see in the photo above, or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from a cube-shaped gearbox that you can't see in the photo above because it sits behind the focus disk. Once the screws are off, the focus disk can just be flipped over for use with longer lens constructions. In the photo above, the white mark disk that you see to the right of the red knob is made of highly resistant Delrin thermoplastic. It can be written on with non-permanent markers to mark up focus measurements for various predetermined shots, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. 2-Stage 4 x 4" Matte Box The SHAPE 2-Stage 4 x 4" Matte Box accepts lenses with up to a 100mm front outside diameter. It mounts to 15mm LWS rods and utilizes a swing-away design, which lets you perform quick lens changes without having to remove the matte box from your rods. You can adjust the height of the matte box in relation to the rods, which comes in handy when your lens center to rod center height is slightly off from the standard. Two rotating filter stages support the use of 4x4" filters. The matte box comes with a top flag (eyebrow), side flags, four matte box donuts in 66, 72, 82, and 90mm sizes, and elastic donut.

Shape Cage Kit with Matte Box & Follow Focus for Sony a7R III

Shape SH-A73KIT (SHA73KIT, SH/A73KIT, SH A73KIT, A73KIT, sh-a73kit) Cage Kit with Matte Box & Follow Focus for Sony a7R III The Cage Kit for Sony a7R III/a7 III from SHAPE includes the components necessary for protecting and mounting the a7R III or a7 III camera. Included in this kit is a formfitting protective cage which features a horizontal 15mm rod clamp on both sides. It provides access to all controls and ports, as well as multiple attachment points for accessories. Also included are a push-button wooden top handle with 15mm LW clamp, a quick release Delta rod base system, a Metabones adapter support bracket, a pair of 10" 15mm rods, a follow focus friction and gear clic with adjustable marker, and a 4 x 4" matte box. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. Off-Set Bracket for Blackmagic Cage The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Friction & Gear Follow-Focus Clic with Adjustable Marker The Shape Friction & Gear Follow-Focus Clic with Adjustable Marker is designed to attach onto standard 15mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic atop the rods, and then slide and close a Shape-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods. The Clic's focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature -- the focus disk -- moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism, as you see in the photo above, or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from a cube-shaped gearbox that you can't see in the photo above because it sits behind the focus disk. Once the screws are off, the focus disk can just be flipped over for use with longer lens constructions. In the photo above, the white mark disk that you see to the right of the red knob is made of highly resistant Delrin thermoplastic. It can be written on with non-permanent markers to mark up focus measurements for various predetermined shots, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. 2-Stage 4 x 4" Matte Box The SHAPE 2-Stage 4 x 4" Matte Box accepts lenses with up to a 100mm front outside diameter. It mounts to 15mm LWS rods and utilizes a swing-away design, which lets you perform quick lens changes without having to remove the matte box from your rods. You can adjust the height of the matte box in relation to the rods, which comes in handy when your lens center to rod center height is slightly off from the standard. Two rotating filter stages support the use of 4x4" filters. The matte box comes with a top flag (eyebrow), side flags, four matte box donuts in 66, 72, 82, and 90mm sizes, and elastic donut.

Shape Offset Shoulder Mount Kit for Sony a7R III

Shape SH-A73SM-OF (SHA73SM-OF, SH/A73SM-OF, SH A73SM-OF, A73SM-OF, sh-a73sm-of) Offset Shoulder Mount Kit for Sony a7R III The Offset Shoulder Mount Kit for Sony a7R III/a7 III from SHAPE includes the components necessary for protecting and mounting the Sony a7R III or a7 III camera on your shoulder. Included in this kit is a formfitting ergonomic cage which protects the camera and features a horizontal 15mm rod clamp on either side. It provides access to all controls and ports, as well as multiple attachment points for accessories. Included in the kit are a push-button wooden top handle with 15mm LW clamp, a quick release Delta rod base system, a Metabones adapter support bracket, an offset rail Rod Bloc, a pair each of 10" and 12" 15mm rods, a quick handle Rod Bloc, a mini composite shoulder pad, and a back pad. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. Off-Set Bracket for Blackmagic Cage The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. 15mm Aluminum Rods (Pair, 12") This pair of Shape 15mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally.

Shape Shoulder Mount Kit for Sony a7R III Camera

Shape SH-A73SM (SHA73SM, SH/A73SM, SH A73SM, A73SM, sh-a73sm) Shoulder Mount Kit for Sony a7R III Camera The Shoulder Mount Kit from SHAPE includes the components necessary for protecting and mounting the Sony a7R III or a7 III camera. Included in this kit is a protective, formfitting ergonomic cage with a horizontal 15mm rod clamp on both sides. It provides access to all camera controls and ports, as well as multiple attachment points for accessories. Included in the kit are a push-button wooden top handle with 15mm LW clamp, a quick release Delta rod base system, a Metabones adapter support bracket, a pair of 18" 15mm rods, a quick handle Rod Bloc, a Mini Composite shoulder pad, and a back pad. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally.

Shape Handheld Cage for Sony a7R III

Shape SH-A73CHH (SHA73CHH, SH/A73CHH, SH A73CHH, A73CHH, sh-a73chh) Handheld Cage for Sony a7R III The Handheld Cage from SHAPE is designed to be used with the Sony a7R III or a7 III camera. It includes the Sony a7R III/a7 III formfitting ergonomic cage, which protects the camera and features a horizontal 15mm rod clamp at either side. It provides access to all controls and ports, as well as multiple attachment points for accessories. Mini push-button wooden side handles with padded straps are included as well. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations.

Shape Sony A7 III Series Cage 15 mm Rod System

Shape SH-A73ROD (SHA73ROD, SH/A73ROD, SH A73ROD, A73ROD, sh-a73rod) Sony A7 III Series Cage 15 mm Rod System The 15mm Rod System for Sony a7R III/a7 III from SHAPE is a kit that includes a formfitting protective cage which features a horizontal 15mm rod clamp on both sides. Access to all controls and ports is provided as well as multiple attachment points for accessories. Also included in this kit are a wooden push-button top handle with 15mm LW clamp, a quick release rod base system, a Metabones adapter support bracket, and two 10" 15mm rods. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. 15mm Aluminum Rods (Pair, 10") This pair of Shape 15mm Aluminum Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

Shape Cage with DSLR Top Handle for Sony a7R III

Shape SH-A73DSH (SHA73DSH, SH/A73DSH, SH A73DSH, A73DSH, sh-a73dsh) Cage with DSLR Top Handle for Sony a7R III The Cage with DSLR Top Handle from SHAPE is designed to be used with the Sony a7R III or a7 III camera. It includes the Sony a7R III/a7 III formfitting ergonomic cage which features a horizontal 15mm rod clamp on both sides. It provides access to all controls and ports, as well as multiple attachment points for accessories. The included DSLR handle with two cold shoes and fifteen 1/4"-20 mounting threads can be mounted either at the front or back of the cage. Ergonomic Cage for Sony a7R III/a7 III Camera The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable. There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4"-20 anti-rotating hole patterns, five ARRI 3/8"-16 anti-rotating hole patterns. 3/8"-16 anti-rotating hole patterns, and two UNC 3/8"-16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations. Top Handle Cold Shoe for DSLR Camera The SHAPE Top Handle Cold Shoe for DSLR Camera is CNC machined from aluminum and features a wooden finger grip made from Canadian maple. The handle mounts onto the shoe of your camera or cage and can be inserted to face forward or rearward. It incorporates a total of 15 1/4"-20 threaded mounting holes and two cold shoe mounts, one at the front of the handle and one at the back.

Shape Shoulder Mount for Panasonic AU-EVA1

Shape SH-EVASM (SHEVASM, SH/EVASM, SH EVASM, EVASM, sh-evasm) Shoulder Mount for Panasonic AU-EVA1 Shape designed this bundle rig specifically for the Panasonic AU-EVA1 camera. It is a robust and complete solution that will increase the level of control on set. It features two handles that can rotate individually on a 360° axis by pushing the Red Push-button System. Once the buttons are released, the handles are secured firmly in place. You can achieve precise positioning by sliding the Rod Bloc System along the 15mm 18” rods and secure the handles by tightening the single red knob on the Rod Bloc. Shape is well known for its Push-button handle, now used by so many professionals in the industry. Shape developed this patented technology to give users quick and easy adjustment. By simply pressing the button, you are allowed a 360 degree rotation to place the handle in the best position for your use. Made of slip-free material, the shoulder pad produces maximum comfort and stability and will increase your level of control on set.

Shape Remote Extendable Arm with Cable for Panasonic AU-EVA1 Camera

Shape SH-EVARH (SHEVARH, SH/EVARH, SH EVARH, EVARH, sh-evarh) Remote Extendable Arm with Cable for Panasonic AU-EVA1 Camera The Panasonic AU-EVA1 remote extension handle from SHAPE offers an adjustable arm extension for the side hand grip provided with the Panasonic AU-EVA1. It features SHAPE's patented Push-button Technology for easy angle adjustment and 360 degree rotation. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm.  

Shape Panasonic AU-EVA1 Camera Bundle Rig with Follow Focus Pro and 4 x 5.6" Matte Box

Shape SH-EVAKIT (SHEVAKIT, SH/EVAKIT, SH EVAKIT, EVAKIT, sh-evakit) Panasonic AU-EVA1 Camera Bundle Rig with Follow Focus Pro and 4 x 5.6" Matte Box The V-lock quick release baseplate is designed for larger cameras like the ALEXA, F5, C300, and broadcast cameras. It can be used tripod or shoulder-mounted, or attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads, and a V-lock Delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. Both 8" and 4" 15mm rods are included for the front and back. The two-stage 4x5.6" matte box can be used as a clip-on or can be mounted on industry-standard 15mm rod systems. The telescopic handle is indexed for extension and rotation, so you can quickly move between known setups. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place without having a full 360° of rotation. The rotating capability allows it to be adjusted for left and right-handed use. The arm features three points of articulation—one ratchet knob and two push button systems. A spring-loaded locking lever along the arms allows you to extend the arms up to 1.5". By pressing the button, you can achieve 360° rotation to place the handle in the required position. The push button system on the handle's joint provides additional articulation near the rosette, while a second push button articulation joint allows you to rotate and precisely position the handgrips. The Follow Focus Pro is suitable for use with film and cine-style lenses. It is designed with a snap-on unit adapter for 15mm rods, to meet your camera rig requirements and adjustments. The unit sports a sleek black anodized finish and is made of robust CNC Machined aluminum. The Gear Arm is reversible, and two gear wheels are supplied to accommodate a wide range of lens barrels with .8mm pitch—28 and 43-tooth aluminum gear. A choice of two different focusing methods (standard or hard stop) allows for accurate adjustment on the set.

Shape Bundle Rig for Panasonic AU-EVA1

Shape SH-EVABR (SHEVABR, SH/EVABR, SH EVABR, EVABR, sh-evabr) Bundle Rig for Panasonic AU-EVA1 The SHAPE Bundle Rig for Panasonic AU-EVA1 is a camera support system designed for the AU-EVA1 and suitable for handheld or shoulder-mounted shooting. It includes the BP0008 V-Lock Quick Release Baseplate with 8" and 4" 15mm rod pairs, the V-Lock Replacement Pad, and the HAND3 Telescopic Handle for ARRI rosette. The V-Lock Quick Release Baseplate is a long-format baseplate for larger cameras like the ARRI ALEXA, Sony PMW-F5, Canon C300, and broadcast cameras. It can be used shoulder or tripod-mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock Delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. A pair each of 8" and 4" 15mm aluminum rods are included for the front and back. The telescopic handle is indexed for extension and rotation, so you can quickly move between known setups. The arms attach to your camera or support via an ARRI-compatible rosette with spring-loaded locking levers, allowing you to lock your arms in place without having a full 360° of rotation. The rotating capability allows it to be adjusted for left and right-handed use. The arm features three points of articulation (one ratchet knob and two push-button systems). A spring-loaded locking lever along the arms allows you to extend the arms up to 1.5" and rotate the handgrips throughout 360°. By simply pressing the button, you can achieve 360° rotation to place the handle in the required position. The push button system on the handle's articulation joint provides additional articulation near the rosette, while a second push button articulation joint allows you to rotate and precisely position the handgrips.

Shape 15mm LW Handle EVF Mount for Panasonic AU-EVA1 Camera

Shape SH-EVALWBT (SHEVALWBT, SH/EVALWBT, SH EVALWBT, EVALWBT, sh-evalwbt) 15mm LW Handle EVF Mount for Panasonic AU-EVA1 Camera Shape designed this bundle rig specifically for the Panasonic AU-EVA1 camera. It's a robust and complete solution that will increase the level of control on set. Extendable Top Handle and View Finder Bracket Arm with Push-button: The handle grip frame is made from robust CNC machined aluminium and the finger grip is made from genuine Canadian maple wood for maximum comfort. The Panasonic AU-EVA1 top handle is removable and you can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your Panasonic AU-EVA1 to your lens type. The View Finder Bracket Arm can quickly be mounted to the Panasonic AU-EVA1 Top Plate with the help of a Ratchet Knob. The position of the View finder can also be adjusted to your need with the help of the ratchet knob system and our patented Push Button Technology (nothing to unscrew - Push, adjust, release, and then its lock).

Shape Baseplate with 15mm Rod System for Panasonic AU-EVA1

Shape SH-EVAB15 (SH-EVAB15, SH-EVAB15, SH-EVAB15, EVAB15, sh-evab15) Baseplate with 15mm Rod System for Panasonic AU-EVA1 The SHAPE Baseplate with 15mm Rod System is designed for use with the Panasonic AU-EVA1 camera. It features four attachment points for securely mounting the AU-EVA1 to a camera rig. The baseplate also comes with a pair of 15mm rods that are 12” long through the length of the baseplate. By unscrewing the bottom section of the baseplate with the included Allen key, you get an adapter plate featuring several 1/4"-20 and 3/8"-16 mounting holes for mounting and balancing your camera on equipment like a tripod, gimbal, or drone.

Shape Telescopic Support Arm Rod Bloc with Delta Quick Release

Shape SH-ARM3 (SHARM3, SH/ARM3, SH ARM3, ARM3, sh-arm3) Telescopic Support Arm Rod Bloc with Delta Quick Release The ARM3 allows you to provide frontal support with the help of its quick plate. Equipped with a quick release features, you can snap it on or remove it in no time. A spring inside the arm allows tilting up and down besides enabling you to get a better image while in motion. Rotation of 360° along the vertical and horizontal axes is possible via the rotating arm.

Shape ENG-Style Camcorder Bundle Rig

Shape SH-ENGBR (SHENGBR, SH/ENGBR, SH ENGBR, ENGBR, sh-engbr) ENG-Style Camcorder Bundle Rig The ENG Style Camcorder Bundle Rig from SHAPE allows additional support for small Sony and Canon camcorders. Thanks to the rubber sticker on the top of the plate, your camera won't move when correctly positioned. The Delta plate on the bottom front of this plate and the rear catch hook allow you to quickly mount and dismount your camcorder from a tripod adapter. You can also attach additional accessories, like portable lights and microphone systems, thanks to the 3/8"-16 and 1/4"-20 threaded holes on the sides. SHAPE's Paparazzi handle allows the user to attach various accessories, and use it for different applications. SHAPE's multipurpose cheese plate is included in the bundle to offer additional attachment options, such as a battery plate. The rig allows you to position your camera in the same axis as your shoulder. The offset bracket can be added to this package for an offset configuration..

Shape ENG Style Camcorder Offset Rig

Shape SH-ENGOFF (SHENGOFF, SH/ENGOFF, SH ENGOFF, ENGOFF, sh-engoff) ENG Style Camcorder Offset Rig This ENG Style Camcorder Offset Rig Baseplate from SHAPE allows additional support for small Sony and Canon camcorders. Thanks to the rubber sticker on the top of the plate, your camera won't move when correctly positioned. The Delta plate on the bottom front of this plate and the rear catch hook allow you to quickly mount and dismount your camcorder from a tripod adapter. Also, you can attach additional accessories like portable lights and microphone systems, thanks to the 3/8"-16 and 1/4"-20 threaded holes on the sides. SHAPE's Paparazzi handle can be added to use the system for different applications. The rig allows you to position your camera in front of your eyes, while supporting it with your shoulder.

Shape ENG Style Camcorder Shoulder Mount Baseplate

Shape SH-ENGSM (SHENGSM, SH/ENGSM, SH ENGSM, ENGSM, sh-engsm) ENG Style Camcorder Shoulder Mount Baseplate This ENG Style Camcorder Shoulder Mount Baseplate from SHAPE supports small Sony and Canon camcorders. Thanks to the rubber sticker on top of the plate, your camera won't move when correctly positioned. The Delta plate on the bottom front of this plate and the rear catch hook allow you to quickly mount and dismount your camcorder from a tripod adapter. Also, you can attach additional accessories, like portable lights and microphone systems, thanks to its 3/8"-16 and 1/4"-20 threaded holes on the sides. Finally, this product can be paired with a SHAPE shoulder pad and a dedicated offset bracket to transform it into a complete support system and even more, a SHAPE Paparazzi handle can be added to use the system for different applications. The rig allows you to position your camera in front of your eyes, while supporting it with your shoulder.

Shape ENG-Style Camcorder Baseplate

Shape SH-ENGBP (SHENGBP, SH/ENGBP, SH ENGBP, ENGBP, sh-engbp) ENG-Style Camcorder Baseplate The ENG-Style Camcorder Baseplate from SHAPE allows additional support for small Sony and Canon camcorders. Thanks to the rubber on the top of the plate, your camera won't move when correctly positioned. The delta plate on the bottom front of this plate and the rear catch hook will allow you to quickly mount and dismount your camcorder from a Tripod Adapter. Also, you can attach additional accessories like portable lights and microphone systems thanks to its 3/8"-16 and 1/4"-20 threaded holes on the sides. Finally, this product can be paired with a SHAPE shoulder pad and a dedicated offset bracket to transform it into a complete support system and even more, a SHAPE Paparazzi handle can be added to use the system for different applications. The rig allows you to position your camera in front of your eyes, while supporting it with your shoulder.

Shape Remote Extension Handle for Sony PXW-FS7M2/FS7 Camera System

Shape SH-FS72RH (SHFS72RH, SH/FS72RH, SH FS72RH, FS72RH, sh-fs72rh) Remote Extension Handle for Sony PXW-FS7M2/FS7 Camera System The SONY FS7M2‘s handle features a different and more efficient design. In reaction to this change, we've decided to craft the SHAPE FS7M2 SERIES to optimize the manipulation of this camera. If you own a Sony FS7M2, this is THE accessory you need. Compatible with ARRI rosettes, it's designed with our unique red push-button technology. Just one push with your thumb and you can rotate the handle on 360 degrees angle. You can put down your camera easily on a table or any surface. Also, after the installation, no tools are required! With this accessory, you will save time and it will make your work simpler! Try it once, you will agree!

Shape Dual-Axis Push Button Magic Arm with 15mm Rod Bloc

Shape SH-RP215 (SHRP215, SH/RP215, SH RP215, RP215, sh-rp215) Dual-Axis Push Button Magic Arm with 15mm Rod Bloc Providing push button adjustment, the SHAPE Dual-Axis Push Button Magic Arm with 15mm Rod Bloc allows you to quickly mount this accessory support arm to your 15mm LWS support rods. You mount your 1/4"-20 accessory to the top of the arm, which features a small mounting platform with rubberized surface. The D-ring assembly enables you to securely tighten down the screw without using tools. The arm is 3.5" long and incorporates a 1/4"-20 threaded mounting hole at the bottom. The 15mm LWS snap-on rod clamp can mount onto your rod setup without having to remove any other mounted accessories. It also features a threaded mounting stud with a large thumbwheel for tightening the arm onto the rod clamp. The push button adjustment allows you to tilt the mounting platform forward or backward, and another push button provides you with pan adjustment to position your accessory just how you want it. This arrangement doesn't require you to stress, strain, or worry when loosening or tightening the central lock-down arm common to most accessory arms. Additionally, each push button only controls one axis, so you don't have to worry about your arm collapsing when you make an adjustment.

Shape 2-Axis Push Button Magic Arm with Hot Shoe

Shape SH-RPB2AHS (SHRPB2AHS, SH/RPB2AHS, SH RPB2AHS, RPB2AHS, sh-rpb2ahs) 2-Axis Push Button Magic Arm with Hot Shoe The 2 axis Push Button Arm system allow a quick access to your camera accessories, but also procure the stability and manoeuvrability you deserve when you’re on the set. The Hot Shoe device facilitates a quick attachment to your camera rig. Our Push Button Arm is the perfect device to mount your monitor to your camera rig. It allows precise and quick adjustments of your camera monitor with the help of the push button technology. SHAPE is well known for its Push Button Handles, now used by so many professionals in the industry. Our patented technology allows the user to make quick and easy adjustments by simply pressing the button. Doing so, you are allowed 360 degrees of rotation to place the handle in the best position for your use. On this device, the camera support arm features 2 Push Buttons, allowing you to make vertical and horizontal positioning adjustments of the camera accessory from the top or the bottom of the arm. The arm can be used for supporting accessories such as a monitor, a view finder, a microphone, a camera light, etc. The 1/4-20 screw is mounted with a ‘bracket’ allowing you to manually fix the accessories to the arm without a tool. The bottom section of the support arm features a Hot Shoe system allowing you to easily mount and unmount it from any Hot Shoe attachment device from your DSLR, monitor or other equipment. The device weighs only 0.11 kg (0.25 lb) and is made from hard anodised aluminium with stainless steel screws to prevent rusting.

Shape DSLR Composite Stabilizer Bundle

Shape SH-COMPOSTABBUNDLE (SH_COMPOSTABBUNDLE, SHCOMPOSTABBUNDLE, SH/COMPOSTABBUNDLE, SH COMPOSTABBUNDLE) DSLR Composite Stabilizer Bundle The Shape DSLR Composite Stabilizer Bundle is a rod-based DSLR camera support system. It includes a custom camera base unit with rod clamps, rod-mounted handgrips, a shoulder pad, adjustable hip stabilizer support arm, follow focus unit, and swing-away 4 x 4 matte box. This bundle is assembled to provide you with the components you need to work with most DSLR cameras in a shoulder mount configuration. Shape even includes the necessary Allen keys for any needed adjustments. The stabilizer support is more than just a shoulder rig; it includes an adjustable support arm that you can brace against your hip or a table top for additional support. The included handgrips incorporate Shape's push button rotation adjustment that you actuate with a press of your thumbs to adjust the rotation of the handgrips. The shoulder pad system curls over your shoulder and includes a small back pad for additional support. The swing-away matte box supports 4 x 4 fitlers, and features two rotating filter stages. Rounding out the bundle is a LWS rod mounted follow focus unit. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Quick Handle Provides professional video stabilization with 2 handles Each handle offers 360° individual rotation Offers easy attachment/removal Rod Block Composed of anodized aluminum Offers composite camera support for all 15mm rods Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob With 2 screw-threaded holes, the Rod Block provides for attachment of components Off-Set Rail Block - 2.875" The SHAPE wlb Off-Set Rail Block - 2.875" is a lightweight anodized aluminum piece that, in congress with a second identical piece, horizontally offsets a pair of standard 15mm rods and Rod Blocks from a SHAPE wlb Paparazzi Riser. The offsetting facilitates the creation of a shoulder-mounted rig in which the shoulder mount assembly is horizontally offset from the camera. The camera is mounted on the riser and centered near the operator's eye. The Off-Set Rail Blocks can be positioned so the rods assembly is set off either to the left or the right of the riser. One Off-Set Rail Block is attached to the front of the Paparazzi Riser, via two screw-threaded holes. A second Off-Set Rail Block is attached in identical fashion to the rear of the Paparazzi Riser. The other end of each of the two Off-Set Rail Blocks has a slot that's 2.875 in (7.3 cm) long. The slot allows screws to attach it in various horizontal positions to the Rod Block, which hosts the standard 15mm rods. Note: Only one Off-Set Rail Block is included. Camera Screw Knob (1/4"-20) The Camera Screw Knob (1/4"-20) from SHAPE is a basic mounting screw designed to attach most cameras to any of SHAPE's rigs and supports. The knob uses a common, stainless steel, 1/4"-20 thread size which is compatible with most modern DSLRs, mirrorless cameras, and camcorders. Compatibility: Composite Series Paparazzi Series Paparazzi Riser Cameleon Series Sumo Series Spider Series Adjustable Composite Shoulder Pad The SHAPE Adjustable Composite Shoulder Pad is a core component of SHAPE's Composite series of camera supports. The pad rests on the camera operator's shoulder to transfer the weight of the camera and any accessories closer to the core of the body. The lightweight aluminum shoulder pad is padded for comfort. Attached to the front of the pad, the included Sliding Rod Block enables the adjustment – up to 2.75 in (7.0 cm) – that allows the operator to set a pair of 15mm rods and at the proper vertical level. The Adjustable Composite Shoulder Pad is compatible with several other camera rig components from SHAPE and, because it accepts standard 15mm rods, other manufacturers as well. You can attach a counterweight to the back of the shoulder pad to provide more support for the camera rig. The shoulder pad is recommended for camera rigs up to 15 lb (6.8 kg) if you're supporting it with dual rods or up to 7.5 lb (3.4 kg) if you're using a single rod, so it's perfect for heavy DSLR setups and lighter HD video camera rigs. Friction & Gear Follow-Focus Clic with Adjustable Marker The Shape Friction & Gear Follow-Focus Clic with Adjustable Marker is designed to attach onto standard 15mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic atop the rods, and then slide and close a Shape-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods. The Clic's focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature -- the focus disk -- moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism, as you see in the photo above, or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from a cube-shaped gearbox that you can't see in the photo above because it sits behind the focus disk. Once the screws are off, the focus disk can just be flipped over for use with longer lens constructions. In the photo above, the white mark disk that you see to the right of the red knob is made of highly resistant Delrin thermoplastic. It can be written on with non-permanent markers to mark up focus measurements for various predetermined shots, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. The Clic is CNC machined and made of lightweight anodized aluminum for strength and durability. Designed to attach onto standard 15mm rods. Attaches onto the rods via a patented clamp system. The focus mechanism moves horizontally to adjust to the lens. The focus mechanism can be used on the left or right side of the lens. A friction wheel and a gear wheel are included to interchange as the focus disk. The focus disk flips to the rear of the focus mechanism to accommodate longer lenses. A thermoplastic mark disk can be written on with non-permanent markers and is interchangeable. An included marker attaches beside the mark disk and slides and tightens into positions along the disk. 2-Stage 4 x 4" Matte Box The SHAPE 2-Stage 4 x 4" Matte Box accepts lenses with up to a 100mm front outside diameter. It mounts to 15mm LWS rods and utilizes a swing-away design, which lets you perform quick lens changes without having to remove the matte box from your rods. You can adjust the height of the matte box in relation to the rods, which comes in handy when your lens center to rod center height is slightly off from the standard. Two rotating filter stages support the use of 4x4" filters. The matte box comes with a top flag (eyebrow), side flags, four matte box donuts in 66, 72, 82, and 90mm sizes, and elastic donut. The matte box has a rear opening of 100mm for lenses. The included anti-reflection donuts prevent light behind the camera from reflecting off any filters in the matte box and degrading the image. Included with the matte box are anti-reflection donuts for lenses with a front outside diameter of 66, 72, 82, and 90mm. The included elastic donut supports lenses with a front outside diameter between 66 and 90mm, and it is especially useful with lenses that grow and shrink as you change focus or zoom. The side flags incorporate a hook design as a safety feature where they attach to the matte box. This helps prevent them from falling out of the matte box should the lock-down thumbscrew loosen accidentally. The swing-away bracket incorporates a height adjustment, enabling you to compensate a total of 0.65" vertically. This allows you to use this matte box with a variety of camera/rod support combinations that may vary slightly from the industry standard 85mm distance from LWS rod center to lens port center. Pair of 15mm Female - Female Rod (8") The Shape Pair of 15mm Female - Female Rod (8") are anodized aluminum rods with 1/2"-13 threaded female extremities. The rods are 8" (203mm) long and have a diameter of 0.59" (15mm). You can use the 15mm Female - Female Rods (8") with 15mm Male - Female Rod (4" / 101.6mm), 15mm Female - Female Rod (6" / 152.4mm), Rod Black, and the Sliding Rod Block. Anodized aluminum rods with 1/2"-13 threaded female extremities Rod Length - 8" (203mm) Rod Diameter - 0.59" (15mm) Compatible with 15mm Male - Female Rod (4" / 101.6mm), 15mm Female - Female Rod (6" / 152.4mm), Rod Black, and the Sliding Rod Block 15mm Extension Rods (Pair, Black, 6") This pair of 6" black 15mm Extensions Rods features one male end and one female end, each with 1/2"-13 threading. The rods are composed of lightweight anodized aluminum for strength and durability. Standard 15mm rod for a camera support system Lightweight anodized aluminum for strength and durability Both extremities of the rods are threaded (1/2"-13) Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. Compatible Support Series: Composite Cameleon Sumo Spider

Shape Sony FS5 Shoulder Mount

Shape SH-FS5SM (SHFS5SM, SH/FS5SM, SH FS5SM, FS5SM, sh-fs5sm) Sony FS5 Shoulder Mount Optimized for the Sony FS5 and FS5M2 cameras, this Shoulder Mount Kit from SHAPE will make a great camera even better by providing an ergonomic solution to run-and-gun shooting. It features a dedicated baseplate with 18" 15mm rods which will mount the quick handle, the mini composite shoulder pad, and back pad with ease, as well as other assorted accessories. The baseplate also sports rubber pads to cushion the camera, and the system has tripod mounting threads on the base. Additionally, the rig is constructed from CNC Machined aluminum and features several 1/4"-20 and 3/8"-16 threads for mounting devices. Baseplate for Sony FS5 and FS5M2 Cameras The SHAPE Baseplate comes with rubber pads at the top so the Sony PXW-FS5 or PXW-FS5M2 camera doesn't sit directly on the aluminum. The baseplate fits 15mm standard rods, which are secured with a red ratchet knob screw. A pair of 10" 15mm rods is included. The baseplate is ideal for drone and gimbal applications, and is designed with a lightweight system for mounting standard 15mm accessories. Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Mini Composite Shoulder Pad The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into. Back Pad The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference – up to 2" vertically and 360° horizontally. 15mm Rods (18", Pair) These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18" long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps.

Shape Telescopic Handle for ARRI Rosette

Shape SH-HAND3 (SHHAND3, SH/HAND3, SH HAND3, HAND3, sh-hand3) Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.  

Shape Sony FS7 Lightweight Plate

Shape SH-FS7LW (SHFS7LW, SH/FS7LW, SH FS7LW, FS7LW, sh-fs7lw) Sony FS7 Lightweight Plate The Sony FS7 Lightweight Plate from SHAPE is a fixed baseplate that provides 15mm LWS rod support without interfering with the camera's shoulder-mount design. A pair of 8" long 15mm rods is included for attaching optional accessories such as a follow focus and matte box. In addition to rod ports, the Lightweight Plate also features ARRI rosettes on each side for attaching the FS7's right handle and an optional left-sided rosette handle. On the underside of the baseplate is a V-lock delta adapter, allowing the baseplate to be mounted on V-lock quick-release tripod plates, such as the Panasonic SHAM-TM700 or Sony VCT14. The delta adapter is attached to a bottom door, which can be opened up to access 1/4"-20 and 3/8"-16 camera screws.

Shape Sony FS7 Bundle Rig with Follow Focus

Shape SH-FS7BRFFP (SHFS7BRFFP, SH/FS7BRFFP, SH FS7BRFFP, FS7BRFFP, sh-fs7brffp) Sony FS7 Bundle Rig with Follow Focus This SHAPE F7S Bundle is a starter rig for the Sony FS7 that directly supports the optional Sony Zoom Control via a rosette adapter. It also features a V-Lock delta adapter allowing compatibility with V-Lock tripod adapters, such as the Sony VCT-14 and Panasonic SHAN-TM700. It's also adjustable for matte boxes and supports offset camera mounting brackets. The bundle includes the SHAPE 8000 V-Lock Quick Release Baseplate, Follow Focus Pro, multi-adjustable telescopic handle, and front and rear 15mm rods.  The baseplate features a long format design for larger cameras and can be used shoulder mounted, tripod mounted, or attached to delta tripod adapters. It includes a removable shoulder pad and offers SHAPE/ARRI standard rosette adapters on both sides. 1/4"-20 and 3/8"-16 tripod mount threads are available underneath the shoulder pad. The front rod adapter can be adjusted vertically to support a matte-box and other accessories. The baseplate has three long camera mount slots, and the off-center ones support an optional SHAPE 15mm Studio Adapter for offset mounting. Nine 1/4"-20 and 3/8"-16 mounting threads are located behind the three slots for flexible accessorizing.  The Follow Focus Pro features a 15mm clamp-on mechanism allowing for quick mounting/dismounting and re-positioning. It has an adjustable arm that lets you use any diameter lens, and it comes with two 0.8 pitch gears providing a choice between 28 and 43 teeth, depending on the throw distance of the lens. It also offers two adjustable hard stops and a standard accessory port.  The Telescopic Handle can be extended out 1.5" and can also be rotated 360°. The rotating capability allows it to be adjusted for left- and right-handed use. At two points, this handle features SHAPE's push-button technology which allows for instant, precise adjustments.  The included rods are 8" and 4" long. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

Shape Sony FS7 Bundle Rig

Shape SH-FS7BR (SH-FS7BR, SH-FS7BR, SH-FS7BR, FS7BR, sh-fs7br) Sony FS7 Bundle Rig The SHAPE F7S Bundle Rig is a starter rig for the Sony FS7 that directly supports the optional Sony Zoom Control via a rosette adapter. It also features a V-Lock delta adapter allowing compatibility with V-Lock tripod adapters, such as the Sony VCT-14 and Panasonic SHAN-TM700. It's also adjustable for matte boxes and supports offset camera mounting brackets. The bundle includes the SHAPE 8000 V-Lock Quick Release Baseplate, multi-adjustable telescopic handle, and front and rear 15mm rods.  The baseplate features a long format design for larger cameras and can be used shoulder mounted, tripod mounted, or attached to delta tripod adapters. It includes a removable shoulder pad and offers SHAPE/ARRI standard rosette adapters on both sides. 1/4"-20 and 3/8"-16 tripod mount threads are available underneath the shoulder pad. The front rod adapter can be adjusted vertically to support a matte-box and other accessories. The baseplate has three long camera mount slots, and the off-center ones support an optional SHAPE 15mm Studio Adapter for offset mounting. Nine 1/4"-20 and 3/8"-16 mounting threads are located behind the three slots for flexible accessorizing.  The Telescopic Handle can be extended out 1.5" and can also be rotated 360°. The rotating capability allows it to be adjusted for left- and right-handed use. At two points, this handle features SHAPE's push-button technology which allows for instant, precise adjustments.  The included rods are 8" and 4" long. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. Telescopic Handle for ARRI Rosette The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5" of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

Shape Sony FS7 V-Lock Quick Release Baseplate

Shape SH-FS7BP (SHFS7BP, SH/FS7BP, SH FS7BP, FS7BP, sh-fs7bp) Sony FS7 V-Lock Quick Release Baseplate The Sony FS7 V-Lock Quick Release Baseplate from SHAPE is a long-format 15mm rod baseplate for the Sony FS7 that can be used shoulder-mounted, tripod-mounted, and attached to V-lock tripod adapters. It includes a removable shoulder pad and features ARRI rosettes on each side to accept optional handles. It has 1/4"-20 and 3/8"-16 tripod mount threads located underneath the shoulder pad, and a V-lock delta adapter for attaching to quick-release V-lock tripod adapters, such as the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The baseplate features 15mm LWS rod adapters at the front and rear. A pair of 8" and 4" 15mm rods are included. For attaching a matte box and other accessories, the front rod adapter can be adjusted vertically if you remove the screws holding it in position. For studio rod configurations, the front 15mm LWS rod adapter can be removed and replaced with optional SHAPE 15mm Studio and 19mm Studio adapters. The baseplate has three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset to maintain optical center when using a 15mm Studio rod adapter. At the rear of teh baseplate there are 1/4"-20 and 3/8"-16 mounting threads for attaching articulating arms and other accessories.

Shape Adjustable Composite Shoulder Pad

Shape SH-SHPAD2 (SH_SHPAD2, SHSHPAD2, SH/SHPAD2, SH SHPAD2) Adjustable Composite Shoulder Pad The SHAPE Adjustable Composite Shoulder Pad is a core component of SHAPE's Composite series of camera supports. The pad rests on the camera operator's shoulder to transfer the weight of the camera and any accessories closer to the core of the body. The lightweight aluminum shoulder pad is padded for comfort. Attached to the front of the pad, the included Sliding Rod Block enables the adjustment – up to 2.75 in (7.0 cm) – that allows the operator to set a pair of 15mm rods and at the proper vertical level. The Adjustable Composite Shoulder Pad is compatible with several other camera rig components from SHAPE and, because it accepts standard 15mm rods, other manufacturers as well. You can attach a counterweight to the back of the shoulder pad to provide more support for the camera rig. The shoulder pad is recommended for camera rigs up to 15 lb (6.8 kg) if you're supporting it with dual rods or up to 7.5 lb (3.4 kg) if you're using a single rod, so it's perfect for heavy DSLR setups and lighter HD video camera rigs.

Shape Baseplate for Canon C300 Camera

Shape SH-B15C300 (SHB15C300, SH/B15C300, SH B15C300, B15C300, sh-b15c300) Baseplate for Canon C300 Camera The Shape C300 Baseplate is made specifically for the Canon EOS C300 Camera. This camera accessory provides a small, light setup solution expandable to a more elaborate setup. It features a pair of 15mm rods that are 12" long through the length of the baseplate. This baseplate attaches underneath the camera with 4 x M4 screws or with 3/8”-16 and 1/4”-20 screws that are included.

Shape 8000 V-Lock Quick Release Baseplate

Shape SH-BP0008 (SH_BP0008, SHBP0008, SH/BP0008, SH BP0008) 8000 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders.

Shape 8000 V-Lock Quick-Release Baseplate Kit

Shape SH-BP8000 (SH_BP8000, SHBP8000, SH/BP8000, SH BP8000) 8000 V-Lock Quick-Release Baseplate Kit With its long flat camera platform and V-lock quick-release compatibility, SHAPE's BP8000 V-Lock Quick Release Baseplate Kit is a versatile rig option for mid-sized cinema cameras with flat bases. The centerpiece of the kit is the V-lock baseplate. Several inches of adjustment is available for achieving balance with large or small lenses. Adjustable 15mm rods in the front and rear allow for different cameras to comply with the 15mm LWS standard for compatibility with follow focuses, lens supports, and more. If you're not carrying the camera on your shoulder, the entire rig can be locked into the included VCT-14 tripod plate. The included articulated handles adjust quickly, with the push of a button. Length adjustment is provided by way of a thumbscrew. Rosettes on either side of the baseplate secure the handles. See below for more details on the items included in this kit. BP0008 V-Lock Quick Release Baseplate The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" and 4" 15mm rods are included for the front and back. This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-center slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders. Telescopic Handles with ARRI Rosettes (Black & Red) The black and red Telescopic Handles with ARRI Rosettes from SHAPE are left and right handgrips that can be attached to cameras and camera support hardware that has standard ARRI rosettes. Each arm features three points of articulation, combined with the approximately two inches of arm extension allows you to adjust the arms for your comfort. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place without having a full 360° of rotation. Shape's unique push-button articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. A second spring-loaded locking lever along the arms allows you to extend the arms up to two inches and rotate the handgrips throughout 360°. The arms are indexed for extension and rotation, so you can quickly move between known setups. The push-button locking joint enables independent rotation throughout 360°. Spring-loaded locking levers allow you to tighten or loosen the lever even when you do not have space to turn the lever throughout the entire 360° range. The arms feature two inches of extension and are indexed every 5mm of extension. The arms can rotate through 360° and feature 30° of index markings. 15mm Aluminum Rods (Pair, 8") This pair of Shape 15mm Aluminum Rods (8") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. 15mm Aluminum Rods (Pair, 4") This pair of Shape 15mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. SHAN-TM700 VTC-Style Quick-Release Tripod Adapter This is a Panasonic Tripod Adapter Plate from SHAPE allowing quick-release mounting/dismounting of professional broadcast cameras. Attach the camera via the VCT-style V-Lock mechanism and then mount to a tripod quick release plate. Multiple 1/4"-20 and 3/8"-16 threaded holes are lined up along the length of the plate on the bottom, allowing for the best possible balance selection.

Shape Composite for Sony F5 & F55

Shape SH-COMPOF5-F55 (SH_COMPOF5_F55, SHCOMPOF5-F55, SH/COMPOF5-F55, SH COMPOF5-F55) Composite for Sony F5 & F55 SHAPE's Composite for F55/F5 is the Composite rig for the Sony F55/F5 camcorder. Featuring the SHAPE QUICK HANDLE ROD BLOC, the SHAPE 15MM ROD SYSTEM PAPARAZZI RISER, the PAIR OF 15MM FEMALE-FEMALE RODS 8", the SHAPE COMPOSITE SHOULDER PAD and the SHAPE BACK PAD, the SHAPE COMPOSITE F3 secures the camera and accessories firmly for mobile applications. HAND 5: Quick Handle Rod Bloc The unique patented SHAPE QUICK HANDLE push-button technology features 2 SHAPE handles that can rotate individually on a 360° axis. ?With a simple push of a button, the SHAPE handles can be rotated. ?Once the red buttons are released, the SHAPE handles will be secured firmly in place. ROD2: 15mm Rod System Paparazzi Riser Equipped with a SHAPE 15MM ROD SYSTEM PAPARAZZI RISER, the SHAPE COMPOSITE STABILIZER enables you to raise the camera directly above the camera support. The system includes a PAIR OF 15MM FEMALE-FEMALE ROD 8”and features a variety of threaded holes (1/4-20” and 3/8-16”), located on the base, to attach a tripod plate and different types of monopods, while the holes in the front and rear of the SHAPE PAPARAZZI RISER are used to attach various accessories such as a SHAPE SLIDING ROD BLOC. With a camera base height of 2" and slot length of 4 in., the SHAPE riser system allows you to slide the camera back and forth to obtain the best position. It can be used to attach a video camera or a DSLR.
The PAIR OF 15MM FEMALE-FEMALE RODS (8"), located at the front, are used to attach accessories such as matte boxes, 35mm lens adapters and follow focus mechanisms. The threads enable you to use either 4" or 6" rods (½-13"). 2ROD15FF8: Pair of 15mm Female-Female 8" Rods The PAIR OF 15MM FEMALE-FEMALE RODS (8") located at the back are used to attach the SHAPE COMPOSITE SHOULDER PAD and other accessories. The threads enable you to use either 4" or 6" rods (1/2-13"). SHPAD1: Composite Shoulder Pad Padded for superior comfort, the SHAPE COMPOSITE SHOULDER PAD rests on your shoulder such that the body supports the weight of the camera and its accessories. The shoulder pad is powder coated with a special finish for a professional look. MALE SCREW KNOB (1/4-20) included. PAD1: Back Pad Powder coated with a special finish for a professional look, the SHAPE BACK PAD offers the camera support superior comfort and stability. Padded on one side, it is attached to the SHAPE COMPOSITE SHOULDER PAD via a MALE SCREW KNOB (1/4-20). You can adjust the position of the SHAPE BACK PAD to suit your body type with a vertical adjustment of 2" and a horizontal adjustment spanning of 360°. A MALE SCREW KNOB (1/4-20) allows easy attachment and removal of the BACK PAD. Optional: It is possible to attach a SHAPE SHAPE BOX on the SHAPE BACK PAD using the threaded holes (1/4-20).

Shape CP33 Cheese Plate with Anton Bauer Plate

Shape SH-CP33ANTON (SH_CP33ANTON, SHCP33ANTON, SH/CP33ANTON, SH CP33ANTON) (CP-33, CP/33) CP33 Cheese Plate with Anton Bauer Plate The Shape CP33 Cheese Plate with Anton Bauer Plate is a 15mm rod-mount cheese plate with an Anton Bauer Gold Mount battery plate screwed onto one side. The plate is 1/4" thick and features 33 threaded holes for accessories to be screwed into. These holes run end to end, from one side of the plate to the other. Four of the holes are 10/32" and the rest are 1/4" and 3/8". The Anton Bauer plate covers many of the holes from one side, but you can still screw into these holes from the other side as long as the screws are not much longer than the 1/4" thickness of the plate. The holes at the very corners of the plate are untouched by the Anton Bauer plate and can be used to attach accessories or devices like AJA's Ki Pro Mini. Screws are included for a Ki Pro Mini and for an IDX battery plate. The cheese plate is precision-machined as one piece.

Shape Telescopic Handle with Rod Block and Hard Case

Shape SH-HAND12KIT (SH_HAND12KIT, SHHAND12KIT, SH/HAND12KIT, SH HAND12KIT) Telescopic Handle with Rod Block and Hard Case The Telescopic Handle with Rod Block and Hard Case from SHAPE is a pair of hand grips that can be attached to 15mm LWS or 19mm rod systems, or even directly to cameras that have standard Arri rosettes. It features a modular design that can be configured in different ways to suit your applications. Each handle features a telescoping section that adds 1.5" of additional length when extended. The 905 Black Nanuk Case, a watertight, dustproof, and shock-resistant case, is included so that you can store your hand grips and keep them protected from the elements.

Shape Composite Shoulder Pad

Shape SH-SHPAD1 (SH_SHPAD1, SHSHPAD1, SH/SHPAD1, SH SHPAD1) Composite Shoulder Pad The Shape Composite Shoulder Pad is for the Shape F3 Composite Support Rig and intended for use with larger-sized cameras such as the F3, EX1, and P2hd, whereas for DSLRs and the C300, the Adjustable Composite Shoulder Pad or the Mini Composite Shoulder Pad would be better. The pad is compatible with 15mm rods, which attach into the red block atop the pad.

Shape Telescopic Support Arm with Rod Bloc

Shape SH-ARM2 (SH_ARM2, SHARM2, SH/ARM2, SH ARM2) Telescopic Support Arm with Rod Bloc The Telescopic Support Arm with Rod Bloc from SHAPE is a variable length support arm designed to stabilize a shoulder rig while keeping the user mobile. The unit consists of a telescopic arm, Rod Bloc, and multi-function shoe which can be independently adjusted to the user's preference. The telescopic arm is a simple aluminum support which may be adjusted at two points, from a minimum length of 14" to a maximum of 20". The top end of the rod is capped by an adjustable single-knob joint which supports and positions the CNC machined aluminum Rod Bloc—the attachment point for a shoulder-mounted rig. At the arm's base is an internal spring designed to provide added control when tilting vertically, allowing the user to capture a more stable image while in motion. The bottom end of the telescopic arm is fitted with SHAPE's multi-function shoe—a cup-style base designed to rest against the user's torso or in a support belt for additional stability. If needed, the shoe may be removed so that the arm may be used as a boom, providing a connection point for a monitor, microphone, light, and more.

Shape Paparazzi Handle for Canon C100/C300/C500

Shape SH-PAC300 (SHPAC300, SH/PAC300, SH PAC300, PAC300, sh-pac300) Paparazzi Handle for Canon C100/C300/C500 The Shape Paparazzi Handle for Canon C100/C300/C500 is specifically designed to work with the Canon Cinema EOS line of cameras using the included baseplate. The rig features 15mm rod clamps with spring-loaded levers and 12" 15mm rods. The baseplate maintains the proper lens center to rod height for use with available rod mounted accessories. This allows you to use available standard follow focus units, zoom motors, and matte boxes with your camera while using the baseplate.  The handle attaches to an included Shape Rod Bloc, creating the Paparazzi with Bloc handle. This allows you to mount the handle to LWS 15mm rods with the handle rising vertically and projecting forward over the camera. This allows you to get low angle shots without having to bend down; you can also under-sling the handle to get high angle shots. The handle features several 1/4"-20 and 3/8"-16 threaded accessory mounting points. Baseplate for Canon C300 Camera The Shape C300 Baseplate is made specifically for the Canon EOS C300 Camera. This camera accessory provides a small, light setup solution expandable to a more elaborate setup. It features a pair of 15mm rods that are 12" long through the length of the baseplate. This baseplate attaches underneath the camera with 4 x M4 screws or with 3/8”-16 and 1/4”-20 screws that are included. Paparazzi with Bloc The SHAPE Paparazzi with Bloc is an ergonomic-designed Paparazzi Handle screwed tight to a Rod Bloc by two 1/4" screws. The Handle features a total of 20 screw-holes for attaching accessories, and the Bloc mounts 15mm rods and keeps the Handle parallel with a camera. You can slide the Bloc up and down the rods and tighten it into position by a red lever on the side. Both the Handle and Bloc are totally solid -- not at all hollow -- and are both water cut / laser cut, as opposed to being molded. The 20 screw-holes are a mix of 1/4", 3/8" and 1/2" sizes and all run completely through from end to end. They are positioned vertically or horizontally along the Handle. The 1/4" and 3/8" holes can take on most any 1/4" and 3/8" accessories like lights, monitors, mics, grips, remote controls, recorders, articulating arms, wireless audio receivers, camera plates, and more. And into the 1/2" holes you can screw in male-threaded SHAPE rods. The diverse set of screw-holes lets you get very creative in dressing up your rig. And the ability to screw in rods lets you just as creatively extend your rig.

Shape Paparazzi Riser/15mm Rod System

Shape SH-ROD2 (SH_ROD2, SHROD2, SH/ROD2, SH ROD2) Paparazzi Riser/15mm Rod System Use the Shape Paparazzi Riser/15mm Rod System as a base to attach accessories to your DSLR or small camcorder. This system displaces the weight of accessories from the camera to the rods/riser. The Paparazzi riser adds 2" to the camera height while its mounting-screw slot allows for up to 4" of front-to-back adjustment. The 15mm rod system offers thumbscrew-locking 8" rods with Allen key vertical adjustment (up to 1.375"). This riser/rod system can work with various on-camera accessories such as a lens support, matte box, lens adapter, or follow focus. Paparazzi Riser The Paparazzi Riser from SHAPE is a 2" fixed-height camera riser offering either parallel or perpendicular camera support. The riser's top surface includes a 4" sliding screw slot that enables the camera to be adjusted front-to-back or side-to-side, depending on the riser's orientation. This Paparazzi Riser features several 1/4"-20 and 3/8"-16 threaded holes. The hole located on the base is used to attach the riser to a camera support, while the front and rear holes can be used to attach various accessories such as a sliding rod block. The Paparazzi Riser is suited for use with small camcorders and DSLR cameras. Constructed of CNC-machined, anodized aluminum, this riser is the common component of all SHAPE Composite camera support systems.

Shape Friction & Gear Follow-Focus Riser Rail Kit

Shape SH-FFROD2 (SH_FFROD2, SHFFROD2, SH/FFROD2, SH FFROD2) Friction & Gear Follow-Focus Riser Rail Kit Friction & Gear Follow-Focus Riser Rail Kit with Adjustable Marker The Shape Friction & Gear Follow-Focus Riser Rail Kit with Adjustable Marker is a follow-focus solution fully-equipped for a camera to be added onto it. It combines Shape's Follow-Focus Friction Clic and 15mm Rod Riser System. The Follow-Focus Clic is designed to attach onto standard 15mm rods and can only pull focus if thus attached. The included Rod Riser System provides such rods and additionally provides a camera platform. The Riser, with the Clic and camera on it, can be mounted onto a tripod via an optional quick-release plate. The plate would attach underneath the camera platform. The platform has various 1/4-20" and 3/8-16" threaded holes in its base. The whole set can also be attached onto Shape shoulder support products. Aside from being a solution for the Clic, the Rod Riser serves additionally as a solution for other accessories, such as 35mm lens adapters and matte boxes. It takes the weight of such accessories off of a lens and onto itself. The Follow-Focus Clic attaches onto the Riser via a clamp system that Shape has patented.  The Clic's focus wheel can be positioned on the left or right side of a lens for either left or right-handed control. The focus mechanism and focus disk of the Clic move together horizontally to adjust to the attached lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus disk can be used either at the front or the rear of the focus mechanism so to accommodate different lens lengths. The Clic's white mark disk can be written on with non-permanent markers. It is thermoplastic, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. The Clic and the Riser together create a kit that can adjust with accuracy to an added camera. The camera can be adjusted into desired positions on the Riser's camera platform; the Riser's rods can be adjusted vertically and horizontally; and the Clic is highly-adjustable as noted above.

Shape Friction & Gear Follow-Focus Clic with Adjustable Marker

Shape SH-FFCLIC (SH_FFCLIC, SHFFCLIC, SH/FFCLIC, SH FFCLIC) Friction & Gear Follow-Focus Clic with Adjustable Marker The Shape Friction & Gear Follow-Focus Clic with Adjustable Marker is designed to attach onto standard 15mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic atop the rods, and then slide and close a Shape-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods. The Clic's focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature -- the focus disk -- moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won't get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth. The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism, as you see in the photo above, or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from a cube-shaped gearbox that you can't see in the photo above because it sits behind the focus disk. Once the screws are off, the focus disk can just be flipped over for use with longer lens constructions. In the photo above, the white mark disk that you see to the right of the red knob is made of highly resistant Delrin thermoplastic. It can be written on with non-permanent markers to mark up focus measurements for various predetermined shots, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk. The Clic is CNC machined and made of lightweight anodized aluminum for strength and durability. Designed to attach onto standard 15mm rods. Attaches onto the rods via a patented clamp system. The focus mechanism moves horizontally to adjust to the lens. The focus mechanism can be used on the left or right side of the lens. A friction wheel and a gear wheel are included to interchange as the focus disk. The focus disk flips to the rear of the focus mechanism to accommodate longer lenses. A thermoplastic mark disk can be written on with non-permanent markers and is interchangeable. An included marker attaches beside the mark disk and slides and tightens into positions along the disk.  

Shape Single Quick Handle with Double ARRI Rosette

Shape SH-HAND2 (SH_HAND2, SHHAND2, SH/HAND2, SH HAND2) Single Quick Handle with Double ARRI Rosette The Single Quick Handle with Double ARRI Rosette from SHAPE features SHAPE's quick-lock button technology. The handle can rotate on a 360° axis. The handle and arm can be rotated by pushing the red button. Once the button is released, the handle is secured firmly in place. The Quick Handle Rosette features a stainless steel locking mechanism for more durability. Providing a solid grip, the handle fits perfectly on the SHAPE baseplate series, including the BP0001 and BP0007 Quick-Release Baseplates, and the Dovetail System thanks to the precision of the ARRI rosette sockets. The handle is removable with one knob screw. It is constructed from CNC machined, high-quality aircraft grade aluminum parts, which are hard anodized for a resistant finish and assembled with stainless steel screws to prevent rusting.

Shape Quick Handle & Rod Bloc

Shape SH-HAND5 (SH_HAND5, SH-HAND5, SH-HAND5, SH-HAND5) Quick Handle & Rod Bloc The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.    

Shape Adjustable Rod Bloc for 15mm and 19mm Rods

Shape SH-BLOC1519AR (SH_BLOC1519AR, SHBLOC1519AR, SH/BLOC1519AR, SH BLOC1519AR) Adjustable Rod Bloc for 15mm and 19mm Rods The Shape Adjustable Rod Bloc for 15 to 19mm Rods is designed to fit HAND10 handles from SHAPE (sold separately). It fits both 15mm lightweight and 19mm studio rods and features ARRI rosettes.

Shape Composite Rider Camera Support for DSLRs

Shape SH-COMPORIDE (SH_COMPORIDE, SHCOMPORIDE, SH/COMPORIDE, SH COMPORIDE) Composite Rider Camera Support for DSLRs The Composite Rider Camera Support for DSLRs from SHAPE is a fully featured support system for using DSLR cameras while shooting video. It positions the camera centered in front of your eye, allowing the use of the camera's viewfinder. It has a set of 15mm rods for attaching accessories such as a matte box, and includes a riser which makes it possible to raise the camera directly up from the support for flexible positioning. The riser can be attached to the left or to the right of the 15mm support rods, accommodating left-handed as well as right-handed shooters. The padded shoulder pad and back pad make using the COMPOSITE system, even for long periods, a comfortable proposition. Sturdy and lightweight camera support system Inline position with shoulder axis Unique patented QUICK HANDLE push-button technology Height-adjustable SLIDING ROD BLOC using black knob PAPARAZZI RISER with several threaded holes (1/4-20" and 3/8-16") Length-adjustable rods using red knobs on ROD BLOCs Fast transition from tripod to shoulder in one simple click Padded back and shoulder pads for superior comfort and stability  

Shape Composite Grip Camera Support

Shape SH-COMPOGRIP (SH_COMPOGRIP,SHCOMPOGRIP, SH/COMPOGRIP, SH COMPOGRIP) Composite Grip Camera Support The Shape Composite Grip Camera Support is an adjustable, lightweight, and compact 15mm LWS shoulder mount rig for DSLRs and compact video cameras. The rig is built around the Paparazzi Riser baseplate, a pair of 15mm Sliding Rod Blocks, and a set of four 8" 15mm rods. The sliding rod blocks enable you to adjust the height of the rods to suit your camera setup. For shoulder mounted shooting, handles and a shoulder pad are included the mount onto the rods. The handles feature rosettes and SHAPE's patented spring-loaded push-button technology that lets you quickly adjust the angle of the grips on-the-fly with just the push of your thumb. The Adjustable Composite Shoulder Pad is height adjustable thanks to its own Sliding Rod Block. For additional support and comfort, a Back Pad is also included that attaches to the rear of the shoulder pad. When you need to go tripod-mounted, the Paparazzi Riser features 1/4"-20 and 3/8"-16 threaded holes at the bottom. Paparazzi Riser The Shape Paparazzi Riser is a camera riser that can be placed either parallel or perpendicular to the camera support, which enables raising the camera directly above the camera support or offset to the right or to the left. The Paparazzi Riser features a variety of threaded holes (1/4-20" and 3/8-16"); one located on the base is used to attach the riser onto a camera support, while the threaded holes in front and rear of the Paparazzi Riser attach various accessories like the sliding rod block. With a camera base of 2", the riser can be used to attach a small video camera or a DSLR with video capability. Made of aluminum and built using CNC machines, the Paparazzi Riser is compatible with the camera supports of the Cameleon, Composite, Red Mamouth, Spider, and Sumo series and is hard anodized for a resistant finish. Placed either parallel or perpendicular to the camera support - enables raising the camera directly above the camera support or offset to the right or to the left Variety of threaded holes (1/4-20" and 3/8-16") - one located on the base used to attach the riser onto a camera support With a camera base of 2", riser can be used to attach a small video camera or a DSLR with video capability Threaded holes in front and rear attach various accessories like the sliding rod block Made of aluminum and built using CNC machines Compatible with the camera supports of the Cameleon, Composite, Red Mamouth, Spider, and Sumo series Hard anodized for a resistant finish Sliding Rod Block The SHAPE Sliding Rod Block allows you to attach 15mm rods to select SHAPE gear and adjust them vertically to support different sized lenses and accessories. Using supplied screws, it can be attached to the front of the PAPARAZZI RISER, CAMELEON I, SPIDER I, SUMO I, and other rigs/accessories that support the screw pattern. One ratchet knob tightens both optional rods in place. Pair of 15mm Female - Female Rod (8") The Shape Pair of 15mm Female - Female Rod (8") are anodized aluminum rods with 1/2"-13 threaded female extremities. The rods are 8" (203mm) long and have a diameter of 0.59" (15mm). You can use the 15mm Female - Female Rods (8") with 15mm Male - Female Rod (4" / 101.6mm), 15mm Female - Female Rod (6" / 152.4mm), Rod Black, and the Sliding Rod Block. Anodized aluminum rods with 1/2"-13 threaded female extremities Rod Length - 8" (203mm) Rod Diameter - 0.59" (15mm) Compatible with 15mm Male - Female Rod (4" / 101.6mm), 15mm Female - Female Rod (6" / 152.4mm), Rod Black, and the Sliding Rod Block Quick Handle + Rod Block The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle. Quick Handle Provides professional video stabilization with 2 handles Each handle offers 360° individual rotation Offers easy attachment/removal Rod Block Composed of anodized aluminum Offers composite camera support for all 15mm rods Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob With 2 screw-threaded holes, the Rod Block provides for attachment of components Adjustable Composite Shoulder Pad The SHAPE Adjustable Composite Shoulder Pad is a core component of SHAPE's Composite series of camera supports. The pad rests on the camera operator's shoulder to transfer the weight of the camera and any accessories closer to the core of the body. The lightweight aluminum shoulder pad is padded for comfort. Attached to the front of the pad, the included Sliding Rod Block enables the adjustment – up to 2.75 in (7.0 cm) – that allows the operator to set a pair of 15mm rods and at the proper vertical level. The Adjustable Composite Shoulder Pad is compatible with several other camera rig components from SHAPE and, because it accepts standard 15mm rods, other manufacturers as well. You can attach a counterweight to the back of the shoulder pad to provide more support for the camera rig. The shoulder pad is recommended for camera rigs up to 15 lb (6.8 kg) if you're supporting it with dual rods or up to 7.5 lb (3.4 kg) if you're using a single rod, so it's perfect for heavy DSLR setups and lighter HD video camera rigs. Back Pad The Shape Back Pad is a professional video accessory that weighs 0.35 lb (0.160 kg) and offers augmented camera support stability and comfort. Padded on one side, the pad is attached to the shoulder rig via a screw knob. You can adjust the positioning of the Back Pad in accordance to your body type with a vertical adjustment range of 1-1/4" and a horizontal adjustment spanning 360°. A screw knob allows easy attachment and removal of the back pad from the support. With a 1/4-20 threaded hole, the Back Pad supports attachment of the Shape Box and other accessories. The Back Pad is compatible with all Shape camera supports except the Mountain series. Weighs 0.35 lb (0.160 kg) Offers augmented camera support stability and comfort One-sided padding Provides easy position adjustment in accordance to your body type with a vertical adjustment range of 1-1/4" and a horizontal adjustment spanning 360° Allows easy attachment and removal of the back pad from the support via a screw knob Supports attachment of the Shape Box and other accessories via a 1/4-20 threaded hole Compatible with all Shape camera supports except the Mountain series

Shape Composite DSLR Stabilizer

Shape SH-COMPOSTAB (SH_COMPOSTAB, SHCOMPOSTAB, SH/OMPOSTAB, SH COMPOSTAB) Composite DSLR Stabilizer Featuring the SHAPE Telescopic Support Arm And Rod Bloc, the SHAPE Quick Handle Rod Bloc, the SHAPE 15MM Rod System Paparazzi Riser includes a PAIR OF 15mm Female-Female Rod 8”, the SHAPE Offset Rail Bloc, the PAIR OF 15MM Male-Female Rods 6", the SHAPE Adjustable Composite Shoulder Pad and the Back Pad, the SHAPE DSLR Stabilizer shoulder rig secures the camera and accessories firmly for mobile applications. ARM2: Telescopic Support Arm and Rod Bloc The hands-free Telescopic Support Arm and Rod Bloc includes a camera mount bracket with a 4" Multifunction Shoe that provides a large surface contact area and a Rod Bloc. Increased stability, manoeuvrability and performance are provided to the camera support using the Telescopic Support Arm and Rod Bloc which can be easily attached to the shoulder rig via the Rod Bloc. You can extend the Telescopic Support Arm and Rod Bloc from a length of 14 to 20". Rotation of 360° along the vertical and horizontal axes is possible via the rotating arm. Easy attachment and removal of the cup attributes versatility to the Telescopic Support Arm and Rod Bloc. By removing the cup, the arm can be used for supporting accessories such as a microphone or camera light. HAND 5: Quick Handle Rod Bloc The unique patented SHAPE Quick Handle push-button technology features 2 SHAPE handles that can rotate individually on a 360° axis. With a simple push of the red buttons, the SHAPE handles can be rotated. Once the red buttons are released, the SHAPE handles will be secured firmly in place. The SHAPE Quick Handle Rod Bloc offers camera support for all 15mm rods. You can achieve precise positioning by sliding the SHAPE Quick Handle Rod Bloc along the rods and tightening the red knob on the ROD BLOC. The locking mechanism is made of stainless steel for more durability. *All CNC machined high quality aircraft grade aluminium parts are hard anodized for a resistant finish. All parts are assembled with stainless steel screws. ROD2: 15mm Rod System Paparazzi Riser Equipped with a SHAPE 15mm Rod System Paparazzi Riser, the SHAPE DSLR Stabilizer shoulder rig enables you to raise the camera directly above the camera support. The system includes a Pair Of 15mm Female-Female Rod 8”and features a variety of threaded holes (1/4-20” and 3/8-16”), located on the base, to attach a tripod plate and different types of monopods, while the holes in the front and rear of the SHAPE Paparazzi Riser are used to attach various accessories such as a SHAPE Sliding Rod Bloc. With a camera base height of 2" and slot length of 4 in., the SHAPE riser system allows you to slide the camera back and forth to obtain the best position. It can be used to attach a video camera or a DSLR.
The Pair Of 15mm Female-Female Rods (8"), located at the front, are used to attach accessories such as matte boxes, 35mm lens adapters and follow focus mechanisms. The threads enable you to use either 4" or 6" rods (½-13"). RAILBLOC3: Offset Rail Bloc You can offset your camera to the right or the left of the SHAPE Paparazzi Riser by using the two black screws on the SHAPE Offset Rail Bloc to create more or less distance between the camera and the shoulder mount. The SHAPE Offset Rail Bloc is used for attaching the SHAPE Paparazzi Riser to the left or the right of the 15mm rods enabling a right or left handed user to work with the camera support. It provides two threaded holes on one side which are used for screwing the SHAPE Offset Rail Bloc to the front of the SHAPE Paparazzi Riser with a 4mm Allen key. A second SHAPE Offset Railbloc can also be attached to the back of the SHAPE Paparazzi Riser. The SHAPE Offset Rail Bloc is then used for attaching a SHAPE Composite Shoulder Pad such as the SHPAD1 or the SHPAD2 by inserting rods. *All CNC machined, high quality aircraft grade aluminium parts are hard anodized for a resistant finish and assembled with stainless steel screws to prevent rusting. 2ROD15MF6: Pair of 15mm Male-Female Rods 6" The PAIR OF 15MM MALE-FEMALE RODS (6"), located at the back, are used to attach the Adjustable Composite Shoulder Pad and other accessories. The threads enable you to use either 4" or 6" rods (1/2-13"). SHPAD2: Adjustable Composite Shoulder Pad Padded for superior comfort, the SHAPE Adjustable Composite Shoulder Pad rests on your shoulder such that the body supports the weight of the camera and its accessories. A SHAPE Sliding Rod Bloc and a Camera Screw Knob (1/4-20) are included with the shoulder pad which is powder-coated with a wrinkle finish for a professional look.

Optional: It is possible to add a RODSUP1: Rod Bloc to attach more accessories on the SHAPE shoulder pad. PAD1: Back Pad Black powder-coated paint for a professional look, the SHAPE Back Pad offers the camera support superior comfort and stability. Padded on one side, the pad is attached to the SHAPE Adjustable Composite Shoulder Pad via A Camera Screw Knob (1/4-20). You can adjust the position of the SHAPE Back Pad to suit your body type with a vertical adjustment of 2" and a horizontal adjustment spanning of 360°. The Camera Screw Knob (1/4-20) allows easy attachment and removal of the SHAPE Back Pad.

Optional: It is possible to attach a SHAPE Box on the SHAPE Back Pad using the threaded holes (1/4-20).