CAME-TV TX01-100 Carbon Fiber Parallax Slider (39.4 inch)

Portabrace TX01-100 (TX01_100, TX01/100, TX01 100) Carbon Fiber Parallax Slider (39.4 inch) The CAME-TV Carbon Fiber parallax slider allows panning of a camera during the slider motion adding add an entirely new dimension to your video. The light weight slider provides the ability of tracking a subject within the center of your shot or the ability to create a wide panning motion creating a wide panoramic effect. The rate of the panning effect is easily tuned at the end of the rail. The aluminum carriage is fitted with precision bearings which moves smoothly and quietly along the rails. The slider can be used on a table or ground via the adjustable feet. The slider can be mounted to a tripod or stand with either a 3/8-16" or 1/4-20" screw. The payload of the slider is 10kg (22 lbs) and the width is 16.2cm  (6.38 In).

CAME-TV TX01-80 Carbon Fiber Parallax Slider (31.5 inch)

Came-TV TX01-80 (TX01_80, TX01/80, TX01 80) Carbon Fiber Parallax Slider (31.5 inch) With the TX01-80 Carbon Fiber Parallax Slider from CAME-TV, there's no need for a fluid head to pan; just attach your camera and it will pan as you slide. The slider belt and mounting platform are connected in a way that achieves this, and the panning angle is adjustable via a control on one of the end sides of the slider. And, whereas with a fluid head you control how steady the pan is, with the TX01-80 the set angle ensures consistent motion. Furthermore, the parallax factor of the slider allows you to track a subject in the center of your shot as you slide and pan. These two capabilities very highly enhance the production value of your shots. The full length of the slider is 31.5" and the payload is 22 lb. The TX01-80 features lightweight carbon fiber rails, robust aluminum parts, and a ball bearing sliding system. It also has individually adjustable legs that allow you to compensate for uneven surfaces when you use the slider directly on the ground or other surfaces. There are both 1/4"-20 and 3/8"-16 threads on the bottom for mounting on a tripod.

CAME-TV SL04-4SR Support Legs for SL04 Adjustable Slider (Set of 4)

Came-TV SL04-4SR (SL04_4SR, SL04/4SR, SL04 4SR) Support Legs for SL04 Adjustable Slider (Set of 4) The CAME-SL04 is an adjustable length slider constructed out of high quality aluminum alloy and is compatible with all kinds of film industry cameras, camcorders or DV cameras. The slider comes standard with a 75/100mm bowl adapter and an optional 150mm bowl adapter is available. It can handle 110 lbs (50kg) and when full assembled has a maximum length of 6.56 feet (2m). There are 6 rod sections included and that are 26.3” (67cm) in length. The track wheels provide smooth & stable sliding. Included is a custom designed soft case to conveniently store and transport the slider. Available in black color, the CAME-SL04 professional slider is designed for film makers to be successful in their craft.

CAME-TV TP705BS Aluminum Monopod With Pivoting and Lockable Foot Stand 705AS

Came-TV TP705BS (TP-705-BS, TP/705/BS, TP 705 BS) Aluminum Monopod With Pivoting and Lockable Foot Stand 705AS The TP705BS Carbon Fiber Monopod with Pivoting and Lockable Foot Stand 705BS from CAME-TV is a 4-section support with flip leg locks that unlock and enable the monopod to extended to a maximum height of 73.9". The 4.7 lb support comes equipped with a fluid video head capable of handling different video applications, and able to support DSLRs, camcorders, and video cameras up to 22 lb. Between the tilt and smooth pan, and the combination of the pivoting foot, the monopod can create fluid movements without shake while recording video. The pivoting foot also locks into place for a more stationary position and shot. To store or transport, the monopod's feet fold up and each section collapses to a closed length of 31.3".

CAME-TV TP705AS Aluminum Monopod with Pivoting and Lockable Foot Stand 705AS

Came-TV TP705AS (TP7-05AS, TP7/05AS, TP-705-AS) Aluminum Monopod with Pivoting and Lockable Foot Stand 705AS The TP705AS Aluminum Monopod with Pivoting and Lockable Foot Stand 705AS from CAME-TV is a 4-section support with flip leg locks that unlock and enable the monopod to extended to a maximum height of 73.9". The 5.3 lb support comes equipped with a fluid video head capable of handling different video applications, and able to support DSLRs, camcorders, and video cameras up to 22 lb. Between the tilt and smooth pan, and the combination of the pivoting foot, the monopod can create fluid movements without shake while recording video. The pivoting foot also locks into place for a more stationary position and shot. To store or transport, the monopod's feet fold up and each section collapses to a closed length of 31.3".

CAME-TV TP705A Aluminum Monopod with Pivoting Foot Stand 705A

Came-TV TP705A (TP7-05A, TP7/05A, TP-70-5A) Aluminum Monopod with Pivoting Foot Stand 705A The TP705A Aluminum Monopod with Pivoting Foot Stand 705A from CAME-TV is a 4-section support with flip leg locks that unlock and enable the monopod to extended to a maximum height of 72.6". The 5.2 lb support comes equipped with a fluid video head capable of handling different video applications, and able to support DSLRs, camcorders, and video cameras up to 22 lb. Between the tilt and smooth pan, and the combination of the pivoting foot, the monopod can create fluid movements without shake while recording video. To store or transport, the monopod's feet fold up and each section collapses to a closed length of 30".

CAME-TV TP703B Carbon Fiber Tripod Legs

Came-TV TP703B (TP7-03B, TP7/03B, TP7 03B) Carbon Fiber Tripod Legs Support your camera safely with these sturdy 703B Carbon Fiber Tripod Legs from CAME-TV. This lightweight tripod supports up to 55 lb, weighs 7.5 lb, and has three-section legs tightened with flip locks. Each leg has a 1.5" diameter and can move independently. They fold down to 30", and their maximum working height extends to 64". The top leg section features foam padding for grip when adjusting height. The legs have flat feet that can be removed to use built-in spikes for balance and stability on soft or rugged terrain. The tripod accepts a standard tripod head with a 3/8"-16 thread. A carry case is included to secure and transport the tripod.

CAME-TV TP703A Aluminum Tripod Legs

Came-TV TP703A (TP7 03A, TP7/03A, TP7 03A) Aluminum Tripod Legs Support your camera safely with these sturdy 703A Aluminum Tripod Legs from CAME-TV. This lightweight tripod supports up to 55 lb, weighs 8.7 lb, and has three-section legs tightened with flip locks. Each leg has a 1.5" diameter and can move independently. They fold down to 30", and their maximum working height extends to 64". The top leg section features foam padding for grip when adjusting height. The legs have flat feet that can be removed to use built-in spikes for balance and stability on soft or rugged terrain. The tripod accepts a standard tripod head with a 3/8"-16 thread. A carry case is included to secure and transport the tripod.

CAME-TV TP701B Carbon Fiber Video Tripod with Fluid Bowl Head

Came-TV TP701B (TP-70-1B, TP/70/1B, TP7 01B) Carbon Fiber Video Tripod with Fluid Bowl Head The 701B Carbon Fiber Video Tripod with Fluid Head from CAME-TV is a lightweight camera support that can hold up to a 55 lb load. The foam-padded, three-section legs extend the tripod's working height to a maximum of 67" and it folds down to 33". The 100mm bowl features a 75mm adapter ring that connects the head to the bowl, and the head offers 360° locking pan rotation, a padded pan/tilt handle, a sliding quick release plate, an easy-to-read bubble level, and a center-column knob that can fine-tune your tripod head's position. The threaded rubber feet can move up and down to reveal spiked ends for stability on rough terrain. A padded carry bag is included to store and transport your tripod.

CAME-TV TP701A Aluminum Video Tripod with Fluid Bowl Head

Came-TV TP701A (TP7-01A, TP7/01A, TP 70 1A) Aluminum Video Tripod with Fluid Bowl Head The 701A Aluminum Video Tripod with Fluid Head from CAME-TV is a lightweight camera support that can hold up to a 55 lb load. The foam-padded, three-section legs extend the tripod's working height to a maximum of 67" and it folds down to 33". The 100mm bowl features a 75mm adapter ring that connects the head to the bowl, and the head offers 360° locking pan rotation, a padded pan/tilt handle, a sliding quick release plate, an easy-to-read bubble level, and a center-column knob that can fine-tune your tripod head's position. The threaded rubber feet can move up and down to reveal spiked ends for stability on rough terrain. A padded carry bag is included to store and transport your tripod.

CAME-TV TP609B Carbon Fiber Video Tripod with Fluid Bowl Head

Came-TV TP609B (TP6-09B, TP6/09B, TP609B) Carbon Fiber Video Tripod with Fluid Bowl Head The 609B Carbon Fiber Video Tripod with Fluid Head from CAME-TV is a lightweight camera support that can hold up to a 33 lb load. The reinforced three-section legs extend the tripod's working height to a maximum of 67" and it folds down to 33". The head offers 360° locking pan rotation, a padded pan/tilt handle, a sliding quick release plate, an easy-to-read bubble level, and a center-column knob that can fine-tune your tripod head's position. The center column is also removable and can be used for handheld, pistol-grip style shots. The feet are rubber and each feature dual-spikes for traction on rough terrain, and an adjustable bottom spreader is included. A padded carry bag is included to store and transport your tripod.

CAME-TV TP609A Aluminum Video Tripod with Fluid Bowl Head

Came-TV TP609A (TP-60-9A, TP/60/9A, TP 60 9A) Aluminum Video Tripod with Fluid Bowl Head The 609A Aluminum Video Tripod with Fluid Head from CAME-TV is a lightweight camera support that can hold up to a 33 lb load. The reinforced three-section legs extend the tripod's working height to a maximum of 67" and it folds down to 33". The head offers 360° locking pan rotation, a padded pan/tilt handle, a sliding quick release plate, an easy-to-read bubble level, and a center-column knob that can fine-tune your tripod head's position. The center column is also removable and can be used for handheld, pistol-grip style shots. The feet are rubber and each feature dual-spikes for traction on rough terrain, and an adjustable bottom spreader is included. A padded carry bag is included to store and transport your tripod.

CAME-TV TP601A Aluminum Video Tripod with Fluid Head

Came-TV TP601A (TP-60-1A, TP/60/1A, TP6 01A) Aluminum Video Tripod with Fluid Head The 601A Aluminum Video Tripod with Fluid Head from CAME-TV is a lightweight camera support that can hold up to a 22 lb load. The reinforced three-section legs extend the tripod's working height to a maximum of 60" and it folds down to 30". The head offers 360° locking pan rotation, a padded pan/tilt handle, a sliding quick release plate, an easy-to-read bubble level, and a center-column knob that can fine-tune your tripod head's position. A padded carry bag is included to store and transport your tripod.

CAME-TV TP-M8 Fluid Bowl Head with Dynamic Balance and Handle

Came-TV TP-M8 (TP_M8, TP/M8, TP M8) Fluid Bowl Head with Dynamic Balance and Handle The M8 Fluid Bowl Head with Dynamic Balance from CAME-TV is a lightweight tripod head that can hold up to a 33 lb load. Dynamic balance settings make it easier to balance heavier loads by adjusting the head's tension in incremental steps. The 100mm bowl head features a sliding quick release plate, 360° locking pan rotation, a +90° to -60° pitch angle, an easy-to-read bubble level, and a handle-style center-column that allows for handheld shooting. . A telescoping, soft-grip pan handle is also included that connects to one of the two rosette mounts on the head.

CAME-TV CAME-URSA-2 Top Handle Rig with Base Plate for Blackmagic Design URSA Camera

Came-TV CAME-URSA-2 (CAME_URSA_2, CAME/URSA/2, CAME URSA 2) Top Handle Rig with Base Plate for Blackmagic Design URSA Camera We have added onto the CAME-TV Top Handle Rig for Blackmagic URSA and included a base plate. The top handle that had many mounting options along with a cold shoe. There are 2 15mm rod mounts that further expand the mounting of accessories. The base plate features quick mounting/dismounting allowing to quickly move from tripod to hand held or a gimbal.

CAME-TV CAME-URSA-1 Top Handle Rig for Blackmagic Design URSA Camera

Came-TV CAME-URSA-1 (CAME_URSA_1, CAME URSA 1, CAME URSA 1) Top Handle Rig for Blackmagic Design URSA Camera The CAME-TV Top Handle Rig for BlackMagic URSA incorporates a top handle that had many mounting options along with a cold shoe. There are 2 15mm rod mounts that further expand the mounting of accessories.

CAME-TV BMPCC2-B5KIT Shoulder Rig Mattebox A B Follow Focus 15mm Rod For Blackmagic Camera

Came-TV BMPCC2-B5KIT (BMPCC2_B5KIT, BMPCC2/B5KIT, BMPCC2 B5KIT) Shoulder Rig Mattebox A B Follow Focus 15mm Rod For Blackmagic Camera Fits the new BlackMagic Pocket Camera 4K and 6K Versions. We have taken our BMPCC cage and transformed it in to this well thought out shoulder rig. It is a beauty and really transforms the BlackMagic Pocket Camera into a fully professional motion picture camera rig to withstand the demands of the modern production environment. The cage is made of Aluminum alloy, hard oxidation surface, designed for BlackMagic Pocket Camera. Included is a cage mounted metal hand grip along with a handle along with a base plate with 2 15mm rod holes that allow for adding 15mm rods to expand the rig and mount accessories. The handle provides for easy transport and the added convenience for low angle shooting. The cage comes with several 1/4" and 3/8" screw holes that can be used to install monitors, microphones and other accessories. There are two cages available in this the listing, the basic and plus version. The plus version is a rounded corner one piece cage with HDMI clamp and has front anti-twist pads built in that keep the camera body parallel to the cage.

CAME-TV BMPCC2-A5KIT Shoulder Rig Mattebox A B Follow Focus 15mm Rod For Blackmagic Pocket Camera

Came-TV BMPCC2-A5KIT (BMPCC2_A5KIT, BMPCC2/A5KIT, BMPCC2 A5KIT) Shoulder Rig Mattebox A B Follow Focus 15mm Rod For Blackmagic Pocket Camera Fits the new BlackMagic Pocket Camera 4K and 6K Versions. We have taken our BMPCC cage and transformed it in to this well thought out shoulder rig. It is a beauty and really transforms the BlackMagic Pocket Camera into a fully professional motion picture camera rig to withstand the demands of the modern production environment. The cage is made of Aluminum alloy, hard oxidation surface, designed for BlackMagic Pocket Camera. Included is a cage mounted metal hand grip along with a handle along with a base plate with 2 15mm rod holes that allow for adding 15mm rods to expand the rig and mount accessories. The handle provides for easy transport and the added convenience for low angle shooting. The cage comes with several 1/4" and 3/8" screw holes that can be used to install monitors, microphones and other accessories. There are two cages available in this the listing, the basic and plus version. The plus version is a rounded corner one piece cage with HDMI clamp and has front anti-twist pads built in that keep the camera body parallel to the cage.

CAME-TV BMPCC2-B3KIT Rig Mattebox A B Follow Focus 15mm Rod For Blackmagic Pocket Cinema Camera

Came-TV BMPCC2-B3KIT (BMPCC2_B3KIT, BMPCC2/B3KIT, BMPCC2 B3KIT) Rig Mattebox A B Follow Focus 15mm Rod For Blackmagic Pocket Cinema Camera Fits the new BlackMagic Pocket Camera 4K and 6K Versions. We have taken our BMPCC cage and transformed it in to this well thought out rig. It is a beauty and really transforms the BlackMagic Pocket Camera into a fully professional motion picture camera rig to withstand the demands of the modern production environment. The cage is made of Aluminum alloy, hard oxidation surface, designed for BlackMagic Pocket Camera. Included is a cage mounted metal hand grip along with a handle along with a base plate with 2 15mm rod holes that allow for adding 15mm rods to expand the rig and mount accessories. The handle provides for easy transport and the added convenience for low angle shooting. The cage comes with several 1/4" and 3/8" screw holes that can be used to install monitors, microphones and other accessories. There are two cages available in this the listing, the basic and plus version. The plus version is a rounded corner one piece cage with HDMI clamp and has front anti-twist pads built in that keep the camera body parallel to the cage.

CAME-TV BMPCC2-A3KIT Rig Mattebox A B Follow Focus 15mm Rod For Blackmagic Pocket Cinema Camera

Came-TV BMPCC2-A3KIT (BMPCC2_A3KIT, BMPCC2/A3KIT, BMPCC2 A3KIT) Rig Mattebox A B Follow Focus 15mm Rod For Blackmagic Pocket Cinema Camera Fits the new BlackMagic Pocket Camera 4K and 6K Versions. We have taken our BMPCC cage and transformed it in to this well thought out rig. It is a beauty and really transforms the BlackMagic Pocket Camera into a fully professional motion picture camera rig to withstand the demands of the modern production environment. The cage is made of Aluminum alloy, hard oxidation surface, designed for BlackMagic Pocket Camera. Included is a cage mounted metal hand grip along with a handle along with a base plate with 2 15mm rod holes that allow for adding 15mm rods to expand the rig and mount accessories. The handle provides for easy transport and the added convenience for low angle shooting. The cage comes with several 1/4" and 3/8" screw holes that can be used to install monitors, microphones and other accessories. There are two cages available in this the listing, the basic and plus version. The plus version is a rounded corner one piece cage with HDMI clamp and has front anti-twist pads built in that keep the camera body parallel to the cage.

CAME-TV C200-KT03 Shoulder Rig with Matte Box & Follow Focus for Canon EOS C200 Cinema Camera

Came-TV C200-KT03 (C200_KT03, C200/KT03, C200 KT03) Shoulder Rig with Matte Box & Follow Focus for Canon EOS C200 Cinema Camera The Shoulder Rig for Canon EOS C200 EF Cinema Camera from CAME-TV is built around a baseplate with a quick release system and an integrated shoulder pad. Two 15mm rods run through the base and can be slid for front or back placement. The included top handle is convenient for low-angle shooting and carrying the camera, and provides threaded holes for mounting accessories. Also included is an extension arm that allows you to attach a separately available handle or handgrip to your rig. This shoulder rig further enhances your production by providing you with a follow focus system and a matte box with a set of three French flags.

CAME-TV CAME-TERAPIN-GH45 Terapin Rig for Panasonic GH5 and GH4

Came-TV CAME-TERAPIN-GH45 (CAME_TERAPIN_GH45, CAME/TERAPIN/GH45, CAME TERAPIN GH45) Terapin Rig for Panasonic GH5 and GH4  The CAME-TV Terapin Rig for Panasonic GH5 and GH4 is built around a power breakout box with a variety of camera and accessory connectors. Use this shoulder-mounted rig to transform your GH5/4 camera into an ergonomic ENG-style setup. The Terapin Rig is comprised of a baseplate with front 15mm and rear 11mm rods, a power distribution box, a Start/Stop trigger handle, a dummy battery, and a Sony L-series type battery plate. The versatile breakout box at the heart of this rig transfers your camera's power, video, and audio signals to a larger, more accessible interface. It draws power from a single Sony L-series type battery and distributes that power to multiple devices simultaneously. The breakout box sports an SDI video output (BNC), two 7.2V accessory ports, and the battery plate. Audio features include one XLR audio input with 48V phantom power, and a 3.5mm headphone jack with volume control knob. The LWS baseplate supports 15mm accessories, enabling you to easily build out your camera rig. The soft shoulder pad attaches to the 11mm rods mounted to the rear of the baseplate. Additional rig components include a microphone clamp, a right angle HDMI adapter, two audio cables, a DC power cable, an HDMI type A cable, and an HDMI type A to type D (micro) cable.

CAME-TV CAME-TERAPIN-A7SR Terapin Rig for Sony a7R II, a7S II, and a7 II

Came-TV CAME-TERAPIN-A7SR (CAME_TERAPIN_A7SR, CAME/TERAPIN/A7SR, CAME TERAPIN A7SR) Terapin Rig for Sony a7R II, a7S II, and a7 II The CAME-TV Terapin Rig for Sony a7R II, a7S II, and a7 II is built around a power breakout box with a variety of camera and accessory connectors. Use this shoulder-mounted rig to transform your a7R II, a7S II, or a7 II camera into an ergonomic ENG-style setup. The Terapin Rig is comprised of a baseplate with front 15mm and rear 11mm rods, a power distribution box, a start/stop trigger handle, a dummy battery, and a Sony L-series type battery plate. The versatile breakout box at the heart of this rig transfers your camera's power, video, and audio signals to a larger, more accessible interface. It draws power from a single Sony L-series type battery and distributes that power to multiple devices simultaneously. The side of breakout box sports an SDI BNC output and two 7.2V accessory ports. Audio features include one XLR audio input with 48V phantom power, a 3.5mm headphone jack with volume control knob, and a 3.5mm microphone jack. The camera connection side offers an additional 3.5mm headphone jack, 3.5mm microphone jack, 7.2V accessory port, and standard HDMI input. The LWS baseplate and rods support 15mm accessories, enabling you to easily build out your camera rig. The soft shoulder pad attaches to the 11mm rods mounted to the rear of the baseplate. Additional rig components include a microphone clamp, a right-angle HDMI adapter, two audio cables, a DC power cable, and an HDMI type A to type D (micro) cable. The power distribution box uses a single L-series type battery to power your Sony a7R II, a7S II, or a7 II camera and several accessories Converts the Sony a7R II, a7S II, or a7 II HDMI video output to a more secure SDI BNC output suitable for distribution over extended distances The handgrip provides a start/stop recording trigger Enables mounting 15mm LWS rod-compatible accessories Use a pro-style microphone with the 48V phantom-powered XLR audio input A soft shoulder pad offers comfortable handheld operating Integrated cold shoe and threaded accessory mounts  

CAME-TV TERAPIN-GH45-3KIT Terapin Rig with Follow Focus and Matte Box for Panasonic GH5 and GH4

Came-TV TERAPIN-GH45-3KIT (TERAPIN_GH45_3KIT, TERAPIN/GH45/3KIT, TERAPIN GH45 3KIT) Terapin Rig with Follow Focus and Matte Box for Panasonic GH5 and GH4 The innovative break out module is the heart of this Panasonic rig features in and out connections between the camera and accessories. This module combines accessories that you would previously have to piece meal together. Having all of these connections in one module transforms this rig into a great Shoulder Mount ENG rig. Power, the break out module gets its power from readily available Sony style batteries NP-F970/950/990. This power is then transferred to the camera via the included dummy battery allowing for long run times and quick battery change out. The module also provides power to the monitor via the included cables and provides 48V Phantom Power for professional microphones. Video, HDMI from the camera is converted to SDI out allowing for long runs to a switch. The included handle has a built in Start / Stop video button to control recording via the adjustable grip. Audio, XLR connector with 48V Phantom Power for professional microphones accessible on the side of the break out module. Headphone out, volume is adjustable via knob and the jack is conveniently located to monitor the audio capture. The rig has an adjustable shoulder pad that provides comfortable shooting. The top handle has a cold shoe and numerous holes for mounting accessories. Attached to the front of the top handle is a dual pivoting monitor arm mount that allows for positioning the monitor to your preference. The 15mm guide rails provide adjustable mounting for the recording handle. There is a microphone mount included in the rig. There are a lot of adjustment points to fine tune this rig to meet your individual setup needs. Includes Follow Focus and Matte Box with Donuts. This rig provides all of the essentials to transform the Terapin into a great setup. The combination of the adjustability along with the innovative break out module makes this rig a great complement to your camera by integrating the critical accessories and allowing you to focus on shooting.

CAME-TV TERAPIN-A7SR-3KIT Terapin Rig with Mattebox & Follow Focus for Sony a7RII, a7SII, a7II

Came-TV TERAPIN-A7SR-3KIT (TERAPIN_A7SR_3KIT, TERAPIN/A7SR/3KIT, TERAPIN A7SR 3KIT) Terapin Rig with Mattebox & Follow Focus for Sony a7RII, a7SII, a7II The innovative break out module is the heart of this Sony rig features in and out connections between the camera and accessories. This module combines accessories that you would previously have to piece meal together. Having all of these connections in one module transforms this rig into a great Shoulder Mount ENG rig. Power, the break out module gets its power from readily available Sony style batteries NP-F970/950/990. This power is then transferred to the camera via the included dummy battery allowing for long run times and quick battery change out. The module also provides power to the monitor via the included cables and provides 48V Phantom Power for professional microphones. Video, HDMI from the camera is converted to SDI out allowing for long runs to a switch. The included handle has a built in Start / Stop video button to control recording via the adjustable grip. Audio, XLR connector with 48V Phantom Power for professional microphones accessible on the side of the break out module. Headphone out, volume is adjustable via knob and the jack is conveniently located to monitor the audio capture. The rig has an adjustable shoulder pad that provides comfortable shooting. The top handle has a cold shoe and numerous holes for mounting accessories. Attached to the front of the top handle is a dual pivoting monitor arm mount that allows for positioning the monitor to your preference. The 15mm guide rails provide adjustable mounting for the recording handle. There is a microphone mount included in the rig. There are a lot of adjustment points to fine tune this rig to meet your individual setup needs. Includes Follow Focus and Matte Box with Donuts. This rig provides all of the essentials to transform the Terapin into a great setup. The combination of the adjustability along with the innovative break out module makes this rig a great complement to your camera by integrating the critical accessories and allowing you to focus on shooting.

CAME-TV GS06 Vest Support For Various Gimbals

Came-TV GS06 (GS-06, GS/06, GS_06, gs06) Vest Support For Various Gimbals The Came-TV Vest Support for Various Gimbals supports gimbals that weigh between 19-48.5 lbs (8.8-22kg).

CAME-TV TS03-120 Camera Slider Carbon Fiber Lightweight Various Lengths

Came-TV TS03-120 (TS-03-120, TS03120, TS03/120, TS03 120) Camera Slider Carbon Fiber Lightweight Various Lengths. The carriage features 6 bearings with the inner 2 being adjustable to change the drag as it smoothly glides along the rails. There are multiple threads on the carriage for mounting optional accessories. The angle adjustable rubber tipped legs are also height adjustable for leveling on uneven surfaces. Included is a padded carrying case.

CAME-TV TS03-100 Camera Slider Carbon Fiber Lightweight Various Lengths

Came-TV TS03-100 (TS-03-100, TS03100, TS03/100, TS03 100) Camera Slider Carbon Fiber Lightweight Various Lengths. The carriage features 6 bearings with the inner 2 being adjustable to change the drag as it smoothly glides along the rails. There are multiple threads on the carriage for mounting optional accessories. The angle adjustable rubber tipped legs are also height adjustable for leveling on uneven surfaces. Included is a padded carrying case.

CAME-TV JX1100-4S2C Dolly Platform System With 4 Straight and 2 Curved Locking Tracks

Came-TV JX1100-4S2C (JX-1100-4S2C, JX11004S2C, JX1100/4S2C, JX1100 4S2C) Dolly Platform System With 4 Straight and 2 Curved Locking Tracks. The dolly has a stainless steel frame and detachable push handle. There are four sets of wheels each and each set has six wheels, with a total of 24 wheels. The track is very smooth without any noise as the joints are closely connected and each section snap locks into place. The tubing is made from high strength and quality industrial stainless steel tube. You can install Straight and Curve tracks together to create many different tracking movements.

CAME-TV JX1100-STAND Dolly Platform System Stand Accessory

Came-TV JX1100-STAND (JX-1100-STAND, JX1100STAND, JX1100/STAND, JX1100 STAND) Dolly Platform System Stand Accessory.  

CAME-TV SL04-ECP Adjustable Length Slider 110 Lbs / 50kg Payload

Came-TV SL04-ECP (SL-04-ECP, SL04ECP, SL04/ECP, SL04 ECP) Adjustable Length Slider 110 Lbs / 50kg Payload. The CAME-SL04 is an adjustable length slider constructed out of high quality aluminum alloy and is compatible with all kinds of film industry cameras, camcorders or DV cameras. The slider comes standard with a 75/100mm bowl adapter and an optional 150mm bowl adapter is available. It can handle 110 lbs (50kg) and when full assembled has a maximum length of 6.56 feet (2m). There are 6 rod sections included and that are 26.3” (67cm) in length. The track wheels provide smooth & stable sliding. Included is a custom designed soft case to conveniently store and transport the slider. Available in black color, the CAME-SL04 professional slider is designed for film makers to be successful in their craft.

CAME-TV TP727 38mm Ball Head 33 Lbs Payload

Came-TV TP727 (TP-727, TP/727, TP 727, TP72-7) 38mm Ball Head 33 Lbs Payload. The TP727 Ball Head features three knobs to control friction, drag and lock. There is bubble level built in to provide accurate leveling for the ballhead. The ballhead quick-release system is based on the Arca-Swiss style.  

CAME-TV 20T Professional Carbon Fiber Tripod With Fluid Head Max

Came-TV CAME-20T (CAME-20-T, CAME20T, CAME/20T, CAME 20T) Professional Carbon Fiber Tripod With Fluid Head Max. Pan Tilt Head Material: Magaluma Tripod Material: Carbon Fiber Gross Weight: 16.64kg / 36.7lbs Max Load: 29.6kg / 65.25 lbs Section: 3 sections Max Tube Diameter: 22mm/ 0.86in Folding: 960mm / 37.8in Min Height: 770mm /30.3 in Max Height: 1700mm / 66.9in

CAME-TV FS7-PLATE 15mm Baseplate Quick Release Plate Rods System FS7 EVA1 URSA mini etc

Came-TV FS7-PLATE (FS-7-PLATE, FS7PLATE, FS7/PLATE, FS7 PLATE) 15mm Baseplate Quick Release Plate Rods System FS7 EVA1 URSA mini etc. Tripod mounting system suitable for Sony FS7 EVA1 and other cameras systems. The included base plate has 15mm rods which allows for mounting accessories and expanding the rig.

CAME-TV BMMCC-PACK Cage for Blackmagic Micro Cinema Camera

Came-TV BMMCC-PACK (BM-MCC-PACK, BMMCCPACK, BMMCC/PACK, BMMCC PACK) Cage for Blackmagic Micro Cinema Camera. Set up your Blackmagic Micro Cinema Camera as a cinema-style rig with this BMMCC-Pack Cage Plus kit from Came-TV. This bundle is based around the aluminum Came-TV Cage, surrounding the camera with protection on the top, bottom, and sides. The included top handle incorporates a cold shoe, a single 15mm rod mount, and threaded 3/8"-16 and 1/4"-20 holes, giving you numerous options for mounting accessories. The baseplate at the bottom of the cage has a pair of built-in 15mm LWS rod mounts. This rig's top handle easily adjusts via its thumb lever lock, helping to balance the camera after adding or removing components. Rounding out this kit are a follow focus, matte box, and a pair of 12" 15mm LWS rods. The follow focus clamps onto the rods and includes an 0.8-mod gear, and a white marking disk. To adjust to various lens diameters, the follow focus has a thumb lever-locking sliding base. The three-stage matte box includes a top flag for shading your lens, and like the follow focus, mounts on the 15mm LWS rods. It includes three frames compatible with both 4 x 5.6" and 4 x 4" filters. For easy lens changes, the matte box swings out of the way while remaining attached to the rods.

CAME-TV GH5 PLUS 3KIT Protective Cage Plus For GH5 Camera With Mattebox & Follow Focus

CAME-TV GH5-PLUS-3KIT (GH5-PLUS/3KIT, GH5PLUS-3KIT, GH5/PLUS-3KIT, GH5 PLUS-3KIT) Protective Cage Plus For GH5 Camera With Mattebox & Follow Focus. The CAME-TV Protective Cage Plus for Panasonic GH5 with Matte Box and Follow Focus includes an armor cage, 4x4" swing-away matte box, and a snap-on follow focus unit. The cage provides over 50 accessory mounting points for you to mount accessories without stressing your camera's body. It is form-fitting, without obstructing access to the camera's functions, connections, battery, or SD card compartment. It features an integrated front plate which prevents your camera from twisting within the cage, and supports the use of the Panasonic XLR microphone adapter (not included). The included swing-away matte box mounts on 15mm rods and accepts lenses with an outside front diameter of up to 110mm. It has approximately 3/4" of height adjustment, and includes a top flag and side flags with adjustable wings. The matte box includes three rubber lens adapters and five sponge lens donuts for working with lenses with a smaller than 110mm front outer diameter. The follow focus snaps on to 15mm rods, articulates to adjust for lenses with different diameters, has A/B hard stops, and includes four lens gears with different internal diameters for mounting on lenses without gears.

CAME-TV GH5-PLUS-5KIT Protective Cage Plus For GH5 Camera Rig With Hand Grip Support

CAME-TV GH5-PLUS-5KIT (GH5/PLUS/5KIT, GH5PLUS-5KIT, GH5/PLUS-5KIT, GH5 PLUS-5KIT) Protective Cage Plus For GH5 Camera Rig With Hand Grip Support. We have taken our Panasonic GH5 cage plus and transformed it in to this well thought out shoulder rig. It is a beauty and really transforms a mirrorless camera into a fully professional motion picture camera rig to withstand the demands of the modern production environment.

CAME-TV RED-RAVEN-2 Rig 2

Came-TV RED-RAVEN-2 (RED/RAVEN-2, RED RAVEN 2, REDRAVEN2, RED RAVEN/2) Rig 2. The CAME-TV Red Raven Kit 2 has a top handle with a 15mm rod hole just under the handle to mount a monitor to. The included monitor mount has a cable to connect to the RED Raven so that you can position an external monitor on the rig. The baseplate has two 15mm rod mounts so that you can expand the rig by adding on accessories like a follow focus.

CAME-TV GH5 Protective Cage for GH5 Camera Rig

Came-TV CAME-GH5 (CAME-GH-5, CAME GH5, CAMEGH5, CAME/GH5) Protective Cage for GH5 Camera Rig. Our cage is designed to fit the Panasonic GH5 with the LCD flip out accessible. The front of the cage has a cut out that when the camera is placed into the cage, prevents the camera from twisting. This cage provides easy access to the battery and sd card without removing the camera from the cage. The top handle is tool-less allowing for easy assembly and storage. The included base plate has 15mm rod holes which allows for mounting accessories and expanding the rig. CNC Machined from aluminum this cage is lightweight and very strong. There are lots of threaded holes on the cage to attach accessories. Included are two cold-shoe mounts, one on the cage and another on the handle. The top handle is reversible for fitting the GH5 XLR Microphone adapter.

CAME-TV UG15-2 Universal Handle Grip With 6 Adjustment Connections

Came-TV UG15-2 (UG15-2, UG-152, UG15/2, UG15 2) Universal Handle Grip With 6 Adjustment Connections. The CAME-TV Universal Handle Grip With 6 Adjustment Connections is adjustable to fit most rigs and the comfortable hand grips provide support when shooting.  

CAME-TV 18T PRO Carbon Fiber Fluid Head Tripod For URSA FS7

Came-TV CAME-18T (CAME-18-T, CAME18T, CAME/18T, CAME 18T) PRO Carbon Fiber Fluid Head Tripod For URSA FS7.The CAME-18T PRO Carbon Fiber Fluid Head Tripod is lightweight yet very sturdy due to the design and use of carbon fiber. Carbon fiber construction provides a stable platform and is not prone to corrosion as aluminum can be. The tripod extends to 168 cm (66 inches) quickly via the quick clamping system. The 100mm bowl fluid head provides smooth and stable movement for larger cameras such as the Blackmagic Design URSA, RED or Sony FS7. The fluid head also features an illuminating level bubble that makes leveling in dark situations much easier.

CAME-TV 15T Pro Carbon Tripod For RED EPIC Cage DSLR Rigs

Came-TV CAME-15T (CAME-15-T, CAME15T, CAME/15T, CAME 15T) Pro Carbon Tripod For RED EPIC Cage DSLR Rigs.This Tripod is professional for Red Eipc, DSLR RIGS Cage and similar.

CAME-TV FF01 Follow Focus FF-01 With A/B Hard Stops For 15mm Rod

Came-TV FF01 (FF-01, FF01, F/F01, F F01) Follow Focus FF-01 With A/B Hard Stops For 15mm Rod.

CAME-TV H1309 3 Point DSLR Rig

Came-TV H1309 (H1-309, H1309, H/1309, H 1309) 3 Point DSLR Rig.The CAME-TV 3 Point DSLR Rig stabilizes your video shoots via the shoulder, chest and hand providing very solid triangulation support. The 3 adjustable arms pivot around the base plate providing stability to almost any body type.The wooden handle provides an attractive finish and is comfortable to grip providing a warmer surface than that of cold metal.

CAME-TV VM04 Tripod Mounting Plate for URSA Mini Rigs

Came-TV VM04 (VM/04, VM04, V/M04, V M04) Tripod Mounting Plate for URSA Mini Rigs.V mount plate. Suitable for our URSA Mini Shoulder Rig. *** Special order item

CAME-TV URSA-MINI-4 BlackMagic URSA Mini Rig Pro Kit

Came-TV CAME-URSA-MINI-4 (CAME/URSA/MINI/4, CAMEURSA-MINI-4, CAME/URSA-MINI-4, CAME URSA-MINI-4) BlackMagic URSA Mini Rig Pro Kit.The URSA Mini Pro Rig is a professional kit that includes a top handle and quick release base plate that includes a padded shoulder rest. The top handle features a 15 mm rod hole that allows mounting a rod for attaching accessories. The base plate has a quick release baseplate for easy adjustment, mounting and removal of the padded shoulder rest. There are two rosettes on the base plate which provide for mounting the included front arm on either side for right or left hand operation. The adjustable front arm allows you to mount your favorite handle to round out the pro kit.

CAME-TV URSA-MINI-3 BlackMagic URSA Mini Rig Basic Kit

Came-TV CAME-URSA-MINI-3 (CAME/URSA/MINI/3, CAMEURSA-MINI-3, CAME/URSA-MINI-3, CAME URSA-MINI-3) BlackMagic URSA Mini Rig Basic KitThe URSA Mini Rig is a basic kit that includes a top handle and quick release base plate. The top handle features a 15 mm rod hole that allows mounting a rod for attaching accessories. The base plate has a quick release baseplate for easy mounting and removal. There are two rosettes on the base plate which provide for expansion of the rig by adding accessories such as a handle.

CAME-TV URSA-MINI-2 Blackmagic URSA Mini Shoulder Rig

Came-TV CAME-URSA-MINI-2 (CAME/URSA/MINI-2, CAMEURSA-MINI-2, CAME/URSA-MINI-2, CAME URSA-MINI-2) Blackmagic URSA Mini Shoulder Rig. Our Blackmagic URSA Mini Shoulder Rig is designed to work with the URSA Mini. The base plate features a shoulder pad, two rosettes on the front and 15mm rails. The shoulder pad is designed for comfort along with balance when resting on your shoulder. The rosettes allow for mounting of handles or other accessories on either side of the base plate. The top handle is great for low shooting and provides an easy way to carry the camera around.

CAME-TV A6300-2 Rig For Sony A6300 / A6500 Camera Cage With Wooden Handle

Came-TV CAME-A6300-2 (CAME-A6300/2, CAMEA6300-2, CAM/6300-2, CAME A6300-2) Rig For Sony A6300 / A6500 Camera Cage With Wooden Handle. Our modular cage is designed to fit the Sony a6300 perfectly. This cage provides easy access to the battery allowing you to replace it without removing the camera from the cage. CNC Machined from aluminum this cage is light weight and very strong. There are lots of threaded holes on the cage to attach accessories. The included base plate and handle have 15mm rod hole(s) which allows for mounting accessories and expanding the rig.The cage comes with cable locks for HDMI and USB cables to protect your camera from damage. The new Sony a6300 can be powered from a basic USB Battery, but in order to keep your camera safe from damage it is important to lock the cable from any movement.The wooden handles provides an attractive finish and are comfortable to grip providing a warmer surface than cold metal.

CAME-TV A6300 Rig For Sony A6300 / A6500 Camera With Handle Cage Baseplate

Came-TV CAME-A6300 (CAME-A6-300, CAMEA6300, CAME/A6300, CAME A6300) Rig For Sony A6300 / A6500 Camera With Handle Cage Baseplate.Our modular cage is designed to fit the Sony a6300 perfectly. This cage provides easy access to the battery allowing you to replace it without removing the camera from the cage. CNC Machined from aluminum this cage is light weight and very strong. There are lots of threaded holes on the cage to attach accessories. The included base plate and handle have 15mm rod hole(s) which allows for mounting accessories and expanding the rig.The cage comes with cable locks for HDMI and USB cables to protect your camera from damage. The new Sony a6300 can be powered from a basic USB Battery, but in order to keep your camera safe from damage it is important to lock the cable from any movement.

CAME-TV H-BMMCC Cage for Blackmagic Micro Cinema Camera

Came-TV H-BMMCC (H-BMM/CC, HBMMCC, H/MMCC, H BMMCC) Cage for Blackmagic Micro Cinema Camera.This form fitting cage from CAME-TV is designed specifically for the Blackmagic Micro Cinema Camera (BMMCC) Special order item.

CAME-TV HT-FS7-2 Sony PXW FS7 Rig Cage Baseplate FS7-2

Came-TV HT-FS7-2 (HT/FS7/2, HTFS7-2, HT/FS7-2, HT FS7-2) Sony PXW FS7 Rig Cage Baseplate FS7-2. Tailored to fit Sony's FS7, this Rig Cage from CAME-TV expands both your camera mounting and accessory mounting options. The custom rig is comprised of a 15mm LWS rod baseplate, side arm, and top plate with 15mm rod clamp. In addition to front and rear 15mm rod clamps, the baseplate features rosettes on either side for attaching optional handgrips and an adjustable lens support. An integrated support pad at the bottom of the baseplate facilitates shoulder-mounted shooting, while an included quick release plate provides 1/4"-20 and 3/8"-16 mounting threads, as well as a V-lock interface for direct attachment to VCT-style tripod plates.For accessory mounting, you'll find eighteen 1/4"-20 threaded holes on the side arm, with additional threaded holes on the top plate. The top plate bolts directly on top of the camera and allows for continued use of the FS7's top handle assembly. An included 15mm rod clamp attaches to the front of the top plate to not only support a pair of 15mm rods at the top of the rig, but also a single 15mm rod oriented perpendicularly to the camera, particularly useful for mounting optional EVF/monitor support arms.Note: This cage is only suitable for a Sony PXW-FS7 with the original top handle.

CAME-TV Sony PXW FS7 Rig Include Cage Handle Baseplate

Came-TV HT-FS7-1 (HT/FS7/1, HTFS7-1, HT/FS7-1, HT FS7-1) Sony PXW FS7 Rig Include Cage Handle Baseplate. Tailored to fit Sony's FS7, this Rig Cage with Top Handle from CAME-TV expands your camera mounting and accessory mounting options. The rig consists of a 15mm LWS rod baseplate, side arm bracket, a top plate with 15mm rod clamp, and a bolt-on long top handle. In addition to front and rear 15mm rod clamps, the baseplate features an adjustable lens adapter support and rosettes on either side for attaching optional handgrips. An integrated support pad at the bottom of the baseplate facilitates shoulder-mounted shooting, with a sliding tripod plate providing quick-release attachment to tripods and other support devices.For accessory mounting, you'll find eighteen 1/4"-20 threaded holes on the side arm, with additional 1/4"-20 and 3/8"-16 threaded holes on the top plate and top handle. A 15mm rod clamp on the front of the top plate not only supports a pair of 15mm rods at the top of the rig, but it also has a single 15mm rod port oriented perpendicularly to the camera, which is particularly useful for mounting optional EVF/monitor support arms.

CAME-TV A7R2-2 Deluxe Edition Rigs For Sony A7RII A7SII

Came-TV CAME-A7R2-2 (CAME-A7R2/2, CAMEA7R2-2, CAME/A7R2-2, CAME A7R2-2) Deluxe Edition Rigs For Sony A7RII A7SIIOur modular cage is designed to fit the Sony A7RII and Sony A7sII perfectly. The Sony A7RII and A7SII share the exact same body dimension. This cage provides easy access to the battery allowing you to replace it without removing the camera from the cage. CNC Machined from aluminum this cage is light weight and very strong. There are lots of threaded holes on the cage to attach accessories. The Deluxe Edition features a reversible top handle detailed with wood for warm comfortable fit. In addition the plush finished side handles are vertically adjustable via the dovetails and rotationally by the locking rosettes. The included base plate and handle have 15mm rod hole(s) which allows for mounting accessories and expanding the rig.The cage comes with cable locks for HDMI and USB cables to protect your camera from damage. The new Sony A7s II can be powered from a basic USB Battery, but in order to keep your camera safe from damage it is important to lock the cable from any movement.

CAME-TV A7R2-1 Deluxe Edition Rigs For Sony A7RII A7SII

Came-TV CAME-A7R2-1 (CAME-A7R2/1, CAMEA7R2-1, CAME/A7R2-1, CAME A7R2-1) Deluxe Edition Rigs For Sony A7RII A7SII. Our modular cage is designed to fit the Sony A7RII and Sony A7sII perfectly. The Sony A7RII and A7SII share the exact same body dimension. This cage provides easy access to the battery allowing you to replace it without removing the camera from the cage. CNC Machined from aluminum this cage is light weight and very strong. There are lots of threaded holes on the cage to attach accessories. The Deluxe Edition features a reversible top handle detailed with wood for warm comfortable fit. In addition the plush finished side handles are vertically adjustable via the dovetails and rotationally by the locking rosettes.The included handle has a 15mm rod hole which allows for mounting accessories and expanding the rig.The cage comes with cable locks for HDMI and USB cables to protect your camera from damage. The new Sony A7s II can be powered from a basic USB Battery, but in order to keep your camera safe from damage it is important to lock the cable from any movement.

CAME-TV A7R2 Sony A7RII A7sII Camera Rig 15mm Rod System

Came-TV CAME-A7R2 (CAME-A7/R2, CAMEA7R2, CAME/A7R2, CAME A7R2) Sony A7RII A7sII Camera Rig 15mm Rod System. Our modular cage is designed to fit the Sony A7RII and Sony A7sII perfectly. The Sony A7RII and A7SII share the exact same body dimensions. This cage provides easy access to the battery allowing you to replace it without removing the camera from the cage. CNC Machined from aluminum this cage is light weight and very strong. There are lots of threaded holes on the cage to attach accessories. The included base plate and handle have 15mm rod hole(s) which allows for mounting accessories and expanding the rig.The cage comes with cable locks for HDMI and USB cables to protect your camera from damage. The new Sony A7s II can be powered from a basic USB Battery, but in order to keep your camera safe from damage it is important to lock the cable from any movement.

CAME-TV A7R2-3KIT For Sony A7RII Camera Rig Mattebox Follow Focus Kit

Came-TV CAME-A7R2-3KIT (CAME/A7R2/3KIT, CAMEA7R2-3KIT, CAME/A7R2-3KIT, CAME A7R2-3KIT) For Sony A7RII Camera Rig Mattebox Follow Focus Kit.We have taken our SonyA7rII cage and transformed it in to this well thought out rig. It is a beauty and really transforms a mirrorless camera into a fully professional motion picture camera rig to withstand the demands of the modern production environment.

CAME-TV A7R2-5KIT For Sony A7RII Camera Rig Mattebox Shoulder Support Kit

Came-TV CAME-A7R2-5KIT (CAME/A7R2/5KIT, CAMEA7R2-5KIT, CAME/A7R2-5KIT, CAME A7R2-5KIT) For Sony A7RII Camera Rig Mattebox Shoulder Support Kit. We have taken our SonyA7rII cage and transformed it in to this well thought out shoulder rig. It is a beauty and really transforms a mirrorless camera into a fully professional motion picture camera rig to withstand the demands of the modern production environment.

CAME-TV ZBTL01-3KIT DSLR Cage For GH4 & SONY A7s & 5D Mark III

Came-TV ZBTL01-3KIT (ZBTL013-KIT, ZBTL013KIT, ZBTL01/3KIT, ZBTL01 3KIT) DSLR Cage For GH4 & SONY A7s & 5D Mark III. The brand new CAME-TV Legendary Cage is built perfectly around the form factor of DSLRs. it is suitable DSLR just like: CANON 5D3/2, 7D GH4, SONY A7s and so on.We have recently updated the cage and it now features a quick release system for your camera. The quick release plate has a back stop that provides anti twisting and is dovetailed for a secure fit. Incorporated into the cage is a push button safety pin that prevents accidental release of the base plate. These updates allow for quick and secure mounting and dismounting of your camera to the cage.The cage has easy access for battery and media removal. It adds full functionality with top and bottom 15mm rod support and a super tough top handle makes it easy to carry around.The bottom of the DSLR cage is ported for battery access on the Canon 5D/7D/1DmkIV. Although the cage will work with other DSLR cameras, this particular model is geared toward the Canon 5D/7D. The entire DSLR cage is CNC milled from billet aluminium and is black anodized for durability. Each standard 1/4 20 threaded mounting hole is lined with stainless steel helicoils which prevents threads from stripping out which can happen quite easily on purely aluminium threads.

CAME-TV ZBTL01-5KIT DSLR Cage W/ Hand Grip For GH4 & SONY A7s & 5D Mark III

Came-TV ZBTL01-5KIT (ZBTL015 KIT, ZBTL015KIT, ZBTL01/5KIT, ZBTL01 5KIT) DSLR Cage W/ Hand Grip For GH4 & SONY A7s & 5D Mark III. The brand new CAME-TV Legendary Cage is built perfectly around the form factor of DSLRs. it is suitable DSLRs like the: CANON 5D3/2, 7D GH4, SONY A7s and so on.We have recently updated the cage and it now features a quick release system for your camera. The quick release plate has a back stop that provides anti twisting and is dovetailed for a secure fit. Incorporated into the cage is a push button safety pin that prevents accidental release of the base plate. These updates allow for quick and secure mounting and dismounting of your camera to the cage.The cage has easy access for battery and media removal. It adds full functionality with top and bottom 15mm rod support and a super tough top handle makes it easy to carry around.The bottom of the DSLR cage is ported for battery access on the Canon 5D/7D/1DmkIV. Although the cage will work with other DSLR cameras, this particular model is geared toward the Canon 5D/7D. The entire DSLR cage is CNC milled from billet aluminium and is black anodized for durability. Each standard 1/4 20 threaded mounting hole is lined with stainless steel helicoils which prevents threads from stripping out which can happen quite easily on purely aluminium threads.

CAME-TV ACCORDION Camera Crane Jibs

Came-TV CAME-ACCORDION (CAME ACCORDION, CAMEACCORDION, CAME/ACCORDION, came-accordion) Camera Crane Jibs.The CAME-ACCORDION features an extending scissor arm that puts the camera right where you need it. The accordion motion allows the arm to extend 4.7 Meters (15 feet) out and then retract back in. The drive is powered by a V-Mount battery (Not included) and is controlled by a rocker switch. The max payload is 15Kg (33 lbs) and works well when paired with our Argo, Prodigy or Mini 3 gimbal. These gimbals can be remote controlled with the Bluetooth joystick providing control of the camera. The kit weighs in at 35kg (77 lbs) and includes the crane, tripod, wheels and aluminum cases.