Hague D5T Camera Tripod Tracking Dolly Kit

Hague D5T Camera Tripod Tracking Dolly Kit(HAG-D5T) The Hague D5T Tripod Tracking Dolly Kit is a quick and easy to use system that has been designed to create super smooth tracking shots with your own tripod. The dolly has two sets of locating holes for the tripod legs which means the tripod can be used in both high and low positions. It has eight radial ball bearing wheels which set the track width to the correct positions as the dolly moves down the track. As a result the track does not require additional supports going between the two sides of track which makes it quicker to set-up and also allows the dolly to pull the track into place which makes it run smoother. The D5T Tripod Tracking Dolly is ideal for use on location or in the studio, all you need is a reasonably flat surface. The dollies width has been set to allow it to go through the majority of doorways and it has its own levelling system which prevents any rocking should the track be on slightly uneven ground. It runs on 40mm diameter track and is supplied with eight 1.5m lengths which provides a 6m run. The dolly will accept all tripods that have feet smaller than 45mm in diameter or with a base spreader and 3 straps are supplied for securing your tripod to the dolly.

Hague LEV Levitator Stabilizer

Hague LEV (L-E-V, l/e/v, L_E_V, lev) Levitator Stabilizer The Hague Levitator is a camera support system similar to a Camframe or Fig Rig, but which has the stabilizing effect of a Steadicam. Like the Fig Rig the support is held by both hands, but the Levitator’s handles are totally free moving and the camera is self balancing, similar to a Steadicam but without the need for counterbalance weights. It’s this combination that gives the camera a levitating effect as if it is floating through the air. The Levitator uses the camera’s own weight for counterbalance, so there is no need for counterbalance weights as used on most “Steadicam type” stabilizers. This reduces the weight of the support and the twin handle design makes it easier to hold for long periods. Once the camera is balanced, the Levitator gives the camera a truly floating effect with easy directional and tilt control with the two handles. As there is very little restriction above or below the camera, the Levitator can simply skim over or under items creating shots unattainable from other devices. The sealed radial bearings in the pivot cups and the ball socket handles reduce hand movement as you move around. It’s quick and simple to set up and the quick release camera plate makes it easy to get your camera on and off the support. Extra mounting holes and a cold shoe enables you to attach any extra accessories to the Levitator. The supplied rigging stands make it easy to adjust the Levitator’s fine trim controls until optimum balance is achieved. Also included is a Balance Correction Adapter, this is only required when heavy lenses are mounted to the camera making it very front heavy, or accessories are mounted to the camera that may affect the cameras centre of balance.  

Hague AMP4 Highshot Camera Mast With Manual Pan & Tilt

Hague AMP4 (A_M_P4, amp4, amp_4, amp/4) Highshot Camera Mast With Manual Pan & Tilt The Hague Highshot Camera Mast with manual pan & tilt capability is ideal for both photography and filming applications, including property photography, sports filming and sports analysis. Supplied in a padded transit bag for easy transportation. Hague Camera Supports have been a leading solutions expert in Aerial Mast Photography and Filming for many years, supplying kits into universities, professional sport teams, estate agencies and sport analysis companies around the world. The new range of Hague Highshot kits are an extension to the current range and offer the flexibility and performance required for professional use. The 6.2m (20ft 4”) Hague Highshot Mast provides an elevated view, with the ability to manually pan and tilt the camera. It’s ideal for compact cameras and small camcorders. Most modern cameras now have WiFi and Bluetooth capability so the camera can be controlled by an app on your phone or tablet which can be mounted at the base of the mast, or a cable can be run down the mast for monitoring and camera control. The Highshot mast is supplied with cable cleats should you be running cables down from the camera. The telescopic mast is lightweight and quick to set up, it has a minimum height of 158cm and a maximum height of 620cm. It is supplied with a tilt head which has a quick release camera plate, making it easy to mount the camera. At the base of the mast a handle is attached to pan the mast with a control cable to tilt the camera. Next to the pan bar there is a mounting plate with both 1/4” and 3/8” threaded holes for attaching an articulating arm, plus a 5/8” (16mm) socket which is used to attach the supplied Hague Ball Levelling Head. The ball levelling head has a standard 1/4" camera screw on top which allows you to mount a viewing monitor directly or a phone/tablet when used with a relevant phone/tablet mount. Supplied in a padded transit bag. Applications   Indoor or outdoor, the mast gives you that extra height compared to a traditional tripod that may not be high enough. Compared with the traditional view the result is completely different and the image is greatly improved when taken from a higher view point.

Hague AMP Highshot Mast - 7.3M

Hague AMP (A_M_P, amp, a_m_p, a/mp) Highshot Mast - 7.3M The Hague AMP Highshot Camera Mast is a lightweight system that extends to a height of 7.3m (24ft) and is ideal for a variety of applications including aerial mast photography, sports analysis, site surveys and sports filming. Supplied in a padded transit bag. Made from lightweight aluminium this mast is extremely portable, quick to set-up and easy to use. With its own tripod style base, which remains attached at all times and just folds up for transport, the mast provides a rigid base and each section of the mast can be raised easily by hand. At the top of the mast there is a standard 1/4” screw attachment to which you would usually attach a ball head, tilt head or powerhead so the camera can then be positioned to the desired angle. Once the camera is in position you can then use a tablet or viewing monitor to see and control your images. Operating from a higher view point drastically changes the picture you can capture and these masts can be utilised outdoors or indoors depending upon the application they are needed for. The mast now has three adjustable legs for levelling off, a supplied spirit level and there is an attachment at the top to secure guide ropes if required. With this mast, you can build your own bespoke solution utilising the related products below or just use the mast by itself. Take your filming/photography capability to new heights with the AMP Camera Mast from the UK’s leading solutions expert. This AMP kit includes the Hague AMP Highshot Camera Mast supplied in a padded transit bag.

Hague DRIVE Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

Hague DRIVE Camslide Drive Carbon Fibre Camera Slider With Auto Pan System The Hague Camslide Drive carbon fibre camera slider will automatically pan the camera whilst you concentrate on the sliding. This ingenious design makes it so much easier to pan and slide at the same time as you only have to concentrate on the one movement. Made from lightweight carbon fibre the Hague Camslide Drive has a smooth design and provides a smooth slider movement too. Measuring 80cm in legth it is an ideal length for working with but also a good size for travelling with. Supplied with its own transit bag the Camslide Drive is an ideal camera slider for many situations. So what’s so special about the Camslide Drive? Well it’s the peculiar looking bar down the centre that makes all the difference. This is the unique drive capability which allows the user to set the slider so it auto pans the camera as you slide along the rail. With a variety of adjustment, you can create both small movements or wide ranging pans as the camera moves along. To operate the Drive system simply adjust the angle of the centre rail and then, as the carriage moves along the rail, it will automatically pan the direction of you camera on the ball head or video head. Please note we would not recommend trying to tilt the camera at the same time as using the auto pan mode but you can set the ball head or video head at a tilted angle. The carriage has a larger seating area which makes it ideal for mounting ball heads or video heads and it incorporates 4 roller bearings for a smooth slider movement. The carriage has a 1/4" screw and a 3/8” adaptor which makes it ideal for mounting ball heads and video heads. There is also a spirit level included within the carriage. The rail is made from lightweight carbon fibre rods and the 80cm length is a very good working length but is not too big for transit. The new style end supports are supplied with adjustable feet which fold up to make the slider compact for travelling and can be used at different angles when on slightly uneven ground. The slider has a mounting plate which allows it to be mounted onto a tripod via both the 1/4” and 3/8” camera screws.   Supplied with its own travel bag the Hague Camslide Drive carbon fibre slider is a lightweight system which is ideal for professional camera set-ups that weigh less than 8kg.

Hague EDGE Camslide Edge Carbon Fibre Camera Slider

Hague EDGE Camslide Edge Carbon Fibre Camera Slider The Hague Camslide Edge camera slider is made from lightweight carbon fibre and provides a smooth sliding movement for professional tracking shots. Measuring 80cm in length the Camslide Edge offers a very workable length and can be used on the ground, a table or tripod mounted. The Camslide Edge has a heavy duty carriage which incorporates 6 roller bearings to ensure a smooth movement with little play and there is a breaking system that can be used to add drag or to lock off the carriage. The larger seating area of the carriage is ideal for getting cameras better balanced on ball heads and video heads. The carriage has a 1/4" screw and a 3/8” adaptor which makes it ideal for mounting ball heads and video heads. There is also a spirit level included within the carriage. The rail is made from lightweight carbon fibre rods and the 80cm length is a very good working length but is not too big for transit. The new style end supports are supplied with adjustable feet which fold up to make the slider compact for travelling and can be used at different angles when on slightly uneven ground. The slider has a mounting plate which allows it to be mounted onto a tripod via both the 1/4” and 3/8” camera screws.   Supplied with its own travel bag the Hague Camslide Edge is a lightweight camera slider which is ideal for professional camera set-ups that weigh less than 8kg.

Hague D9 Camera Table Tracking Dolly

Hague D9 (D 9, D-9, D/9, d9) Camera Table Tracking Dolly The Hague D9 Table Dolly enables you get tracking shots on a table, board or any smooth surface. The high quality 80mm diameter wheels have twin sealed radial ball bearings, which make the table dolly easy and quiet to move. The dolly will track in a straight line or it can be set to track in an arc, to go round an item. On top of the dolly is a 75mm bowl, this enables you to transfer your “75mm bowl type” video head from your tripod onto the dolly and level it off on the bowl mount. You then have the facility to be able to both pan and tilt whilst tracking the dolly. The large footprint of the dolly prevents tipping or slipping when using the video head. It's ideal for both DSLRs and camcorders. An articulated arm, for a monitor or other accessory, can be fastened to the dolly using one of the table dollies 1/4” or 3/8” threaded mounting points. Includes D9 Table Dolly. The price does not include the video head, camera, monitor or any other accessories shown.  

Hague D10 Camera Skater Ladder Dolly

Hague D10 (D-10, D 10, D/10, d10) Camera Skater Ladder Dolly The Hague dual purpose Skater Ladder Dolly runs on any smooth, flat surface and the wheels can be set to track in a straight line or angled to track round an object.  The Hague Skater Ladder Dolly also runs on a ladder to create tracking shots over any terrain. The high quality wheels have sealed radial ball bearings to ensure super smooth movement. Your video head can easily attach to the dolly as it has a 75mm bowl mount. This means you can simply remove the head from your tripod and mount it on the dolly, with the facility to level off the head. The 75mm bowl levelling system has now become the most popular on the majority of professional tripods. When the dolly is mounted onto a ladder an extra set of guide wheels are used to prevent it from coming off the ladder and the dolly’s width is adjustable to accommodate the different widths of ladder.   A ladder makes an ideal track as it can just be laid on the ground for low shots or suspended above ground for higher shots or to go over an item. This enables you to get tracking shots over any terrain. Optional ladder supports are available to suspend the ladder between two tripods or to level off the ladder when used on the ground. A track kit is also available, with the advantage of the track breaking down to shorter lengths for easier transportation.

Hague K3 Mini Camera Jib Traveller

Hague K3 (K-3, K 3, K/3, k3) Mini Camera Jib Traveller The Hague Mini Jib Traveller K3 is small, compact, lightweight and easy to take anywhere. Measuring just 82cm for transit, and weighing just 2kg, this jib is ideal for people on the go. It’s ideal for both DSLRs and all handheld camcorders under 3kg, or could be used with action cameras such as the GoPro for an even more lightweight set-up. The Mini Jib Traveller is fastened directly to the video head of any sturdy tripod, in the same way you would attach your camera. It can be mounted using both 1/4” and 3/8” screws. On the end of the jib is a camera plate mounted on a pulley with a control cable coming down the jib to a second pulley at the side of the video head on the tripod. It is this control cable that keeps the camera level as the jib is raised or lowered. Tilting the tripod’s video head controls the camera pulley on the end of the jib, enabling the camera to be tilted up or down. The radial ball bearings in the pulley ensure a very smooth tilt movement. The jib has a telescopic weight bar which can be adjusted to counterbalance the camera with standard bar weights (not supplied) or a sandbag used for counterbalance. An additional feature of the Mini Jib Traveller is the ability to mount the jib horizontally so you can create sideways tracking movement, similar to a slider, or the camera can be positioned to move forward or back. Combine this with using the pan bar on the video head and some very unusual shots can be achieved. Specifications: Up and Down Crane movement - 140cm, Length from tripod to camera - 72cm, Telescopic weight bar length 20 - 70cm, Total maximum length 146cm, Transit Size: 82 x 10 x 7cm, Weight: 2kg.   Includes K3 Mini Jib Traveller with tilt facility. The price does not include the tripod, camera, weights or any other accessories shown.  

Hague K10-UPH Camcrane with stand & underslung powerhead

Hague K10-UPH (K10UPH, K10 UPH, K10/UPH, k10-uph) Camcrane with stand & underslung powerhead The Hague CamCrane K10-UPH is quick and simple to set up, it is supplied with its own stand and a underslung remote controlled pan & tilt powerhead. The stand's height is adjustable from 1.1 to 1.4 metres high with standard bar weights (not supplied) used for counterbalance, these are held in place by the weight bar and there is an adjustable fine trim weight to obtain perfect balance. Once balanced the camera can smoothly move from ground level to almost 4 metres high and the crane will pan 360 degrees on the stand. You also have the ability to pan and tilt the camera through 360 degrees by controlling the underslung powerhead using the wired remote control. The distance from the stand to the camera is 2.5 metres and the K10 has a total length of 3.6 metres. It is ideal for all handheld cameras under 2.5kg. An optional monitor bracket is available, this enables a LCD monitor to be fastened to the crane, making it easier to monitor your shots.   The Hague UPH electronic motorized Underslung Pan & Tilt Power Head is suitable for all handheld cameras that weigh less than 2.5kg. Having the camera underslung gives much greater tilt movement (360 degrees) which enables the camera to point directly down if required. The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control.  Includes: K10 CamCrane, Fine Trim Weight, Weight Bar, Remote Underslung Pan & Tilt Power Head, Power Head Remote and extension cable.

Hague K18-PH200 CamCrane Camera Jib With Pro Pan & Tilt Powerhead

Hague K18-PH200 (K18PH200, K18 PH200, K18/PH200, k18-ph200) CamCrane Camera Jib With Pro Pan & Tilt Powerhead The Hague CamCrane K18 with the joystick controlled PH200 Pro Pan & Tilt Power Head is quick and simple to set up, it attaches to any sturdy 100 or 75mm "bowl type" tripod or can be supplied with the optional Hague Dolly D3. It’s ideal for both handheld camcorders and DSLR cameras up to 4kg (8.8lbs) in weight.   Once balanced the camera can smoothly move from ground level to almost 7 metres high and the crane will pan 360 degrees. You have the choice of using the CamCrane at it’s full length or without two of the centre sections. At it's full length support cables are used to improve rigidity. The counterbalance arm has an adjustable fine trim weight and a weight bar with handgrips. Standard bar weights are used for counterbalance (not supplied). A supplied monitor bracket enables the PH200 control box and a LCD monitor to be fastened to the crane, making it easier to monitor your shots.   The PH200 Pro Pan & Tilt Power Head will pan and tilt through 360 degrees, this enables the camera to point directly upwards or downwards when required. It is driven by two custom-geared motors with belt drive. The power head’s drive pulleys have sealed radial ball bearings for effortless smooth movement with minimum backlash. The motor drive can be easily disengaged to enable the camera to be balanced correctly on the camera plate. The head’s camera plate is adjustable for different sizes of camera and will support up to 4kg (8.8lbs). The speed of movement is variable, from the slowest crawl up to 52 degrees per second. The drive motors are quiet at low speeds, but will be heard at higher speeds if the camera's onboard microphone is used. (Similar to most power heads on the market). The head and controller are supplied in their own transit case.   The Joystick Control gives the head precision pan and tilt movement in either direction, from a slow crawl up to the required speed. The Joystick will also pan and tilt simultaneously. On the side of the control box is a variable speed controller, so you can set the maximum speed for better control, there are also switches to change the direction of the joystick control and an on & off switch. On the front of the control box are sockets for the control cable, 12vDC in, plus a composite video out phono socket, this enables a monitor to be added to monitor your shots. Led lights indicate when the unit is switched on and when the internal battery is on charge. The head is powered by a rechargeable internal battery which will last approximately 3 hours, or can be powered from the supplied mains adaptor. On the base of the control box is a ¼” threaded hole to allow it to be mounted to the crane. A 5 metre cable is supplied to connect the control box to the head. This cable can also carry a composite signal from the head to the controller, allowing a monitor to be used without the need of additional wires.   The K18 CamCrane is made of aluminium and breaks down into 5 main sections, making it easier to handle in transit. It is supplied in a cardboard carton but an optional transit case is also available.   K18 CamCrane - Specifications Length from stand/tripod to camera 427cm at its longest length, or 210cm at its shortest length. Length from stand/tripod to weight bar 143cm. Total length: 570cm or 350cm at its shortest length. Vertical crane movement from ground level to 695cm high (at its longest length) or 226cm (at its shortest length). The maximum vertical crane movement includes going down as well as up, so the crane would need to be on a raised area to achieve the full movement. Colour – Black. Transit Size: 120 x 18 x 16 cm. Weight: 17kg (37.5lbs).   PH200 Remote Pan & Tilt Power Head - Specifications Weight – 2.4kg. Dimensions – L240 x W120 x H450mm. Head sockets – 1 x 6 pin control socket. 1 x RCA phono socket (video in). Head construction – Black powder coated CNC machined aluminium. Drive - 2 Custom-geared motors with belt driven drive pulleys. Maximum Camera Weight - 4kg. Approximate maximum sized camera L450 x W180 x H280mm.   PH200 Joystick Control Box- Specifications Weight – 1kg. Dimensions – L140 x W100 x H75mm. Control box sockets – 1 x 6 pin control socket. 1 x RCA phono socket (video out). 1 x 12vDC in socket, size 2.1mm. Switches – On/off, Pan direction, Tilt direction, and Maximum speed control. Approximate Speed – Variable from 0 to 52 degrees per second. Power Requirements – 12 -15Vdc. Control Box construction – Black powder coated aluminium with non slip feet and ¼” threaded mounting hole. Mains adapter 100-240v AC to 15Vdc. Control Cable – Length 5 metres.     Price includes:- K18 CamCrane with PH200 Pro Pan & Tilt Power Head, Control Box Mounting Bracket and Monitor Bracket. Price does not include the Camera, Tripod, Dolly, Monitor or any of the other accessories shown.

Hague Pro Pan & Tilt Power Head

Hague Pro Remote Pan & Tilt Power Head

Hague Suction Mounting Kit

Hague Camera Suction Mount Kit  

Hague Double Suction Mount

Hague Double Suction Mount  The Hague SM4 Double Suction Mount for cars has two strong suction pads which can be attached to any flat non-porous surface and these give the camera mount extra stability. It has a large camera plate which supports the camera over a greater area preventing any movement in the camera's plastic casing. A double ball bracket, along with the tubular structure, enable the camera to be mounted in a variety of positions. It’s ideal for mounting a camera either outside or inside a vehicle, or on glass windows, or any flat non-porous surface. Ideal for all handheld cameras up to 3kg. Suction pad diameter 150mm. (pump action vacuum). 

Hague Pro Suction Mount

Hague Pro Camera Suction Mount  The Hague SM3 Pro Suction Mount for cars has 3 suction pads which can be attached to any horizontal or vertical, non-porous flat surface. There are 3 adjustable brackets on the suction pads and 3 on the triangle plate, with a selection of connecting poles of different lengths so the mount can be used in a variety of positions. The triangle plate has a 100mm. bowl with a quick release slide plate mounted on a claw-ball leveller, making it quick and simple to set the camera to the required position. A video head could be used on the mount if required. It is ideal for mounting a camera onto a vehicle or any non-porous surface.  

Hague Tripod Tracking Dolly (Inc Track)

D5T - Hague Tripod Tracking Dolly Kit The Hague D5T Tripod Tracking Dolly has two sets of locating holes for the tripod legs, which means the tripod can be used in both high and low positions. It has eight radial ball bearing wheels which set the track width to the correct positions as the dolly moves down the track. The Tracking Dolly is ideal for use on location or in the studio, all you need is a reasonably flat surface. The dollies width has been set to allow it to go through doorways, it has its own levelling system which prevents any rocking should the track be on uneven ground. It runs on inexpensive 40mm dia. PVC pipe which can be supplied or is available from DIY stores. The dolly will accept all tripods that have feet smaller than 45mm in diameter or with a base spreader, 3 straps are supplied for securing your tripod to the dolly and also supplied are 2 track connectors for joining your track.

Hague K2WS Junior Jib with Stand

Hague K2WS Junior Jib With Stand  

Hague Junior Jib

Hague Junior Jib