Sony BRC-X1000 4K Pan Tilt Zoom Camera

Sony BRC-X1000 4K (BRC/X1000, BRCX1000, BRC_X1000, brc-x1000) Pan Tilt Zoom Camera "Sony Brc-X1000 4K Pan Tilt Zoom Camera With 1-Inch Type Exmor R Cmos Sensor" Remotely capture broadcast quality 4K images with smooth, silent PTZ and excellent low-light sensitivity The BRC-X1000 is Sony's first 4K remote camera, combining uncompromising broadcast picture quality and smooth, silent PTZ operation with the flexibility of 3G-SDI and HDMI connections. Designed for remote operation, this compact but powerful robotic camera is an ideal complement to other broadcast cameras for capturing images in hard-to-reach or unobtrusive positions. It's equally at home in TV newsrooms, remote studios and on-air suites, auditoriums, houses of worship, courtrooms or sports stadiums. It's also particularly suited to efficient multi-camera set-ups, under the control of a single operator. The 1-inch type Exmor R CMOS image sensor captures detail-packed 4K footage at 30p with four times the pixel count of Full HD, and excellent low-light sensitivity. The large image sensor also allows the creation of beautiful 'bokeh' effects with a shallow depth of field to suit any artistic intention. Speedy, near-silent PTZ operation with 12x optical zoom accommodates wide-angle scenes and tightly framed close-ups, with Clear Image Zoom 18x (4K), 24x(HD) extending this range even further without visible loss of resolution. Broadcast-friendly features include dual tally lamps for on-air operation, while operational flexibility is enhanced with options for ceiling, table top or tripod mounting. There’s also a broad range of video interfacing and remote control possibilities - plus support for PoE+ and genlock - for smooth integration into any broadcast, professional or corporate AV environment. Enhanced Pan/Tilt/Zoom (PTZ) operation Accurately re-frame shots or track moving subjects with smooth, speedy, near-silent remote control of pan, tilt and zoom functions. There's also low-speed zoom and a slow pan/tilt mode for precise, judder-free camera movements. PTZ Trace Memory* allows a sequence of camera movements to be memorised and followed whenever required. PTZ Motion Sync* smoothly blends separate pan, tilt and zoom movements for seamless, professional-looking transitions. Uncompromising 4K images The camera's large, back-illuminated 1-inch type Exmor R CMOS sensor delivers uncompromised broadcast quality colour pictures in detail-packed 4K 30p, with four times the resolution of Full HD. Footage can also be captured in Full HD 60p - ideal for fast-moving sports action. Cinematic 24p pictures* The camera can also operate in 24p mode, for video footage with a rich, filmic look. High quality 12x optical zoom and 18x(4K) or 24x(HD) with Clear Image Zoom The high quality Zeiss Vario-Sonnar T* lens with 12x optical zoom range covers wide angle shots as well as tight close-ups. Clear Image Zoom expands this range to 18x (4K) or 24x (HD) without sacrificing detail. Excellent low light sensitivity The BRC-X1000 can capture crisp, low noise colour video images in light levels as low as 1.7lx, making it an ideal choice for dimly lit live hall and theater. Flexible installation Integration is simplified in a wide range of environments, with PoE+ (Power over Ethernet) to reduce cabling requirements and VISCA control over IP. Remote operation Pan/tilt/zoom and other camera settings can be controlled using the supplied IR remote commander, or with the optional RM-IP10 Remote Control Unit that can control multiple cameras. Genlock Genlock simplifies integration with other systems in multi-camera broadcast environments. Versatile video outputs Enjoy greater installation flexibility in professional broadcast and AV environments with dual link 3G-SDI (x4) and HDMI video outputs. Front and rear tally lamps Ideal for on-air broadcast use, the BRC-X1000 features dual tally lamps on the front and rear of the camera body. Brightness of the front tally lamp can be adjusted in two steps. Always up to date New camera functionality and performance improvements can be added via firmware updates over IP.

Sony HXC-P70H//U 3x2/3" C-MOS HD Exmor Camera Head

Sony HXC-P70H//U (HXCP70H//U, HXC/P70H//U, hxc-p70h//u) 3x2/3" C-MOS HD Exmor Camera Head Comes with 2 Years Sony Prime Support Warranty - Beware of grey imports. The HXC-P70 is a point-of-view “POV” camera developed for a wide range of more affordable applications than the HDC-P1, thanks to a longer cable distance extension and a higher sensitivity, in addition to its compact size, light weight and lower power consumption. The HXC-P70 allows direct connection to the HXCU-FB70 camera control unit by optical fibre cable, in addition to two HD/SD-SDI outputs. The hybrid type fibre cable can extend the distance from the CCU up to 500 m, while supplying the required power. If a single-mode fibre cable is connected, the distance can extend up to 10 km with a local power supply. The HXC-P70 adopts the same three 2.2-million pixels 2/3-inch type CMOS sensors as used on Sony high end camera such as the HXC-D70 and delivers high sensitivity of F12 at 59.94Hz or F13 at 50Hz. In addition, the camera uses an electrical CC filter alongside a servo motorized optical ND filter. These help to reduce the power consumption and make for an affordable total system with the CCU, cables, and remote controller. The camera is ideal for a wide variety of applications, from production studio and event hall/stadium work, to wider applications such as surveillance, conference and house of worship installations. High sensitivity and low noise Incorporates high quality three 2/3-inch Exmor CMOS sensors, plus integrated motorised ND Filter and electrical CC filter. Optical fibre transmission with direct cable connection Up to 500m by the hybrid type optical fibre cable with power supply and up to 10km by the single-mode fibre cable with local power supply. HXCU-FB70 Camera Control Unit Connects to the HXCU-FB70 for precise remote control. Low power consumption Power saving design provides low power consumption of 17W. Superb three 2/3-inch-type CMOS sensors Keeping the same compact and lightweight body as the HDC-P1, the HXC-P70 achieves a cost reduction while providing the high picture quality equivalent to the reputable HXC-D70 HD/SD system camera by using the same image sensor. It achieves high sensitivity of F12 (at 1080/59.94i) or F13 (at 1080/50i) while keeping low noise ratio. Integrated ND filter / Electrical CC filter, and TLCS The HXC-P70 is equipped with a Neutral Density (ND) optical servo filter unit and electrical Colour Correction (CC) filter. The electrical CC filter can be controlled from the remote control panel, which allows you to assign with four different colour temperatures. In addition to the filter functions, thanks to the TLCS (Total Level Control System) function, gain/iris/shutter is automatically controlled by the ambient brightness, making it very efficient for nature shooting or surveillance use from morning to night. Expandable operability with HXCU-FB70 Connecting the HXC-P70 with the HXCU-FB70 optical fibre camera control unit (CCU) enables precise remote control in picture adjustment and colour matching of cameras, while also monitoring the SDI output signal. Long-distance transmission up to 10 km The hybrid type optical fibre cable can extend the distance from the HXCU-FB70 camera control unit up to 500 m while supplying the required power. In the case of connection with a single-mode fibre cable (SMF), it can extend up to 10 km, if you are using a local power supply. Using the SMF already laid as infrastructure in many facilities enables you to install the camera system quickly and easily. Beneficial digital extender by 2x or 4x The digital extender function expands the size of the image by a factor of two or four times in the centre of the image sensor’s captured image. This function works without a decrease in sensitivity, such as an F-number drop, which typically occurs when using conventional optical extender functions.