Datavideo Ptr10 Pan Tilt Head

Datavideo Ptr10 Pan Tilt Head(DATA-PTR-10MKII) Datavideo’s brand-new PTR-10 MARK II is a robotic pan-tilt head that is designed to turn any small size video camera or block cameras into a robotic camera A sleek design fits seamlessly in your studio. With its weight of 3.4 Kg, it can be placed on any heavy-duty tripod or mounted on the wall and ceiling which brings up a lot of flexibility for your video production. The PTR-10 MARK II can be controlled by the included IR controller, VISCA protocol controller, Datavideo RMC-180 Camera controller, RMC-300A Universal Remote-Control Panel, and compatible with DVIP over Ethernet and other integration solutions such as Crestron. Multiple Signal Interface PTR-10 MARK II supports a lot of signal interface for passing through the remote head. Amongst these interfaces are SDI, HDMI, RS-232, RS-422, DVIP, Tally, and LANC. Cost-Effective PTR-10 MARK II makes the change from regular camcorder cameras to remote controlled PTZ very cost effective. Multi-camera remote operations can be handled by a single person.  Wide Range of Compatible Cameras Supported The PTR-10 MARK II implements LanC control that is compatible with a wide range of professional video camcorders, allowing you to select the best camcorders for your needs. Light Weight, Strong, and Sturdy design With a weight of 3.4 kg, PTR-10 MARK II is built from aluminum alloy, making it a very sturdy base for your camera. It can support cameras up to 4 kilograms. Diversified Controller Options Compatible with Serial, Ethernet, and Lanc. Datavideo RMC-180 series, and RMC-300A will fit your need. Support your cameras up to 4 Kg weight on PTR-10 MARK II Super strong design. PTR-10 MARK II is built from aluminum alloy, making it a very sturdy base for your camera.  Support 50 preset camera shooting positions When your video production requires many different angles and positions, 50 preset camera positions will meet your needs. Using the IR remote allows you to call up to 50 presets at any time. When combined with the RMC-300A universal remote controller, the 14 physical buttons can be called at any time. When using the RMC-180 MARK II remote control, there are 4 physical buttons to call. PoE++ Supported You do not need any battery mount on your camera when using PTR-10 MARK II. The PoE++ is building in the PTR-10 MARK II; No extra battery or power needed when operating Built-in Tally light With the big tally light in the front to show the status of your camera. D-tap connector for DC output The D-tap connector is widely used in the broadcast industry as a standard for powering accessories from battery or mains power. This will make it easier for you to find a ready-made power cable for your specific camera. Included is a D-tap to DC 5.5mm with lock for Datavideo cameras. Selectable DC voltage output for different cameras (7.4 / 8.4 / 10 / 12V ) Multiple Signal Interface PTR-10 MARK II supports a lot of signal interface for passing through the remote head. Amongst these interfaces are SDI, HDMI, RS-232, RS-422, DVIP, Tally, and LANC.

Datavideo wm-11 Wall Mount for Datavideo PTR-10 Cameras

Datavideo wm-11 Wall Mount for Datavideo PTR-10 Cameras(DATA-WM11) Mount your camera securely with the WM-11 Wall Mount from Datavideo, an extremely durable wall mount designed for compatibility with the PTR-10 and PTR-10T series robotic pan tilt heads. This wall mount can be mounted either horizontally or upside-down in a vertical configuration to meet your needs, and the durable aluminum and 3mm thick carbon steel plating ensure reliable, long-lasting performance, with a maximum load capacity of 110.2 lb. The WM-11 features three bubble level meters for accurate positioning and strong metal expansion bolts that mount the system securely to any wall. These features help the WM-11 mount retain absolute stability during the most demanding usage scenarios.

Datavideo LBK-1 Look Back Kit

Datavideo LBK-1 Look Back Kit(DATA-LBK1) Look Back Kit Allows users to view the camera image LBK-1 also includes a tally led that can be used to tell the talent that the camera is live or that the recording has been started. Fits on any tripod Can be housed a 22" screen with VESA mount and fit most 22" LCD screens with a VESA (100x100mm) mount.