Shape mini quick release monitor mount for magic arm

SH-MNQR SHMNQR SH MNQR SH/MNQR Shape mini quick release monitor mount for magic arm Mini Delta Monitor Plate ( MILTA) The Mini Delta Monitor Plate (MILTA) is designed with a Mini Delta Plate and a sliding bracket with 2 anti-rotating support pins to hold your monitor The Mini Delta Plate (28 mm x 24 mm ) can be installed in both direction on the bracket, allowing you to position the anti-rotating support pins in the front or back of the monitor The 2 anti-rotating support pins are 11 mm height, 8mm diameter and are designed to keep your monitor in place Strongly attach your monitor to the bracket with (1) ¼-20 captive screw and use the sliding feature to rest your monitor onto the anti rotating stoppers (Due to the different thickness of monitors, the sliding plate can be adjusted so the monitor rest on the anti rotating stoppers) The sliding distance between the centre of the captive screw and the 2 anti rotating stoppers goes from 12mm to 35 mm, meaning that you have 23mm freedom to adjust your monitor to the stoppers.

Shape Sony FX9 push-button view finder mount

SH-FX9VF SHFX9VF SH FX9VF SH/FX9VF Shape Sony FX9 push-button view finder mount Sony FX9 Push-Button Viewfinder Mount.

Shape 15mm LW to 19mm studio snap-on adapter

SH-BL19A SH BL19A SHBL19A SH/BL19A Shape 15mm LW to 19mm studio snap-on adapter SHAPE BL19A (BL-19-A) 15mm LW to 19mm Studio Snap-On Adapter. Designed to adapt 15mm lightweight accessories to 19mm studio spaced rods. Comes with a 19mm Studio offset Rod Clamp and a 15mm lightweight adapter spaced rods. Snap-On design enabling you to attach the support Snaps onto 19mm studio rods without having to remove other rod-mounted accessories. 15mm rod posts for attaching LW 15mm accessories like our Follow Focus(FFPRO). Left side of the clamp designed with 1x Anti-Twist 3/8"-16 accessory mounts. Made with a durable CNC Machined Aluminium and stainless-steel construction.

SHAPE Matte Box (swing-away)

SH-AKSWA SH AKSWA SH/AKSWA SHAKSWA SHAPE Matte Box (swing-away) A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a variety of wide-angle lenses.Two 4×5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4×4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. The removable swing-away module makes lens changes a snap. A spring pin helps to lock the mechanism closed without manually setting the pin. 2 magnets hold it in place when closed.Removable height adjustable rod block with one tightening knob allows micro-adjustment of height, ensuring compatibility with a wide range of lenses. The rod block can be re-installed directly on the main frame for a straight configuration. The complete kit allows three different configurations, (swing-away, straight and clip-on).

Shape Matte Box (clip-on)

SH-AKSCL SH AKSCL SHAKSCL SH/AKSCL SHAPE Matte Box (clip-on) A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a large variety of wide angle lenses. Two 4×5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4×4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. Removable light carbon fiber french flag can be attached on top to prevent flares. A series of adapter rings are included in the kit

Shape Follow Focus Kit with Single 15mm Rod Clamp

Shape SH-FA123 (SH/FA123, SH_FA123, SHFA123, SH FA123) Follow Focus Kit with Single 15mm Rod Clamp Use the compact SHAPE Follow Focus Kit with Single 15mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens. At the core of the kit is a rubber, anti-slip follow focus wheel attached to a single aluminum 15mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever. The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. Modular design allows for addition and removal of components without tools or screws. Its compact size allows it to fit easily with lens accessories like a matte box. The rubber follow focus wheel is attached to an adjustable, aluminum 15mm rod clamp which can swing away when changing lenses. The focus wheel fits most lens sizes. Five drive gears are included: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. A rubber friction wheel is included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. An 11" whip and a speed crank are included. Each connects to the focus wheel for fine adjustments. Four magnetic marking disks are included to attach to the focus wheel.    

Shape Quick Release V-Lock Adapter

Shape SH-QUICK (SHQUICK, SH/QUICK, SH QUICK, QUICK, sh-quick) Quick Release V-Lock Adapter The SHAPE Quick Release V-Lock Adapter attaches to the camera platform of your tripod, monopod, or support rig, providing a standard V-lock mounting interface. It is designed for use with SHAPE's optional V-lock "Delta Adapter" camera plate, but will also work with any camera plate that utilizes a V-lock mounting system. CNC machined from a solid aluminum block, the adapter supports loads up to 50 pounds and features one 1/4"-20 and two 3/8"-16 threaded mounting holes. A locking system with a release button on the side of the plate allows for quick removal of your V-lock camera plate.

Shape Delta Marbel Quick Release Kit

Shape SH-DELTAQUICK (SHDELTAQUICK, SH/DELTAQUICK, SH DELTAQUICK, DELTAQUICK, sh-deltaquick) Delta Marbel Quick Release Kit The SHAPE Delta Marbel Quick Release Kit includes a V-lock delta quick release plate and V-lock delta quick release adapter that you can use to quickly mount any camera to any support platform. Featuring one 1/4"-20 thread and one 3/8"-16 thread, the quick release plate can be attached to the camera platform of any tripod or video rig. The quick release adapter features two 1/4" holes, attaches on the bottom of your camera, and allows quick release mounting/dismounting on and off the plate. A simple push of a release button on the side of the quick-release plate releases the adapter and allows you to remove your camera. The plate supports loads up to 50 lb. All the necessary screws are supplied. The adapter attaches to your camera along with an included, thin camera plate. The camera plate has stoppers on the back that will keep the camera from twisting sideways. The camera plate and stoppers are both adjustable to support different-size cameras, and the stoppers can be removed completely to make room for full-size cameras. An alignment screw is included to secure the camera plate in place. The quick release adapter is also compatible with third party V-lock delta plates, such as the Sony VCT-U14.

Shape Coiled Start/Stop Cable for ARRI Camera (16")

Shape SH-CBLAR (SH_CBLAR, SHCBLAR, SH/CBLAR, SH CBLAR) Coiled Start/Stop Cable for ARRI Camera (16") This cable allows users to access ARRI'S Start / Stop command. The handle comes with an extensible 16-inch coil cable with Push-Pull Connector Plug at handle’s end.

Shape SH-CPVALX Cheese Plate and V-Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-CPVALX (SH_CPVALX, SHCPVALX, SH/CPVALX, SH CPVALX) Cheese Plate and V-Mount Battery Plate for ARRI ALEXA Mini Camera This item features a Cheese Plate and a V-Mount Battery Plate to power your Alexa Mini Camera. The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig. A 10" cable connects to the Alexa Mini's power input and provides the necessary amount of power to the camera. Additional accessories can also be powered off the P-Tap port.

Shape SH-CPGALX Cheese Plate and Gold Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-CPGALX (SH_CPGALX, SHCPGALX, SH/CPGALX, SH CPGALX) Cheese Plate and Gold Mount Battery Plate for ARRI ALEXA Mini Camera This item features a Cheese Plate and a Gold Mount Battery Plate to power your Alexa Mini Camera. The Cheese Plate is designed with a 15 mm rod bloc system with one ratchet knob allowing you to quickly fix your plate to your Camera Rig.  A 10" cable connects to the Alexa Mini’s power input and provides the necessary amount of power to the camera.

Shape SH-ALEXVM V-Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-ALEXVM (SH_ALEXVM, SHALEXVM, SH/ALEXVM, SH ALEXVM) V-Mount Battery Plate for ARRI ALEXA Mini Camera Our V-Mount battery plate provides the right battery voltage and amperage to use with your ALEXA Mini camera.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the ALEXA Mini's power input. Additional accessories can also be powered off the P-Tap port.

Shape SH-ALEXGM Gold Mount Battery Plate for ARRI ALEXA Mini Camera

Shape SH-ALEXGM (SH_ALEXGM, SHALEXGM, SH/ALEXGM, SH ALEXGM) Gold Mount Battery Plate for ARRI ALEXA Mini Camera The Gold Mount ALEXA Mini Battery Plate is perfect to power your ALEXA Mini camera with this QRC-MINI Gold Mount Bracket from Anton Bauer.  You can easily mount the battery plate to a Cheese Plate rig while a 10" integrated cable connects to the ALEXA Mini's power input and provides the necessary amount of power to the camera.

Shape Coiled Start/Stop Cable with Timecode SDI for RED Camera (16")

Shape SH-CBLRD (SH_CBLRD, SHCBLRD, SH/CBLRD, SH CBLRD) Coiled Start/Stop Cable with Timecode SDI for RED Camera (16") This cable allows users to access RED Camera’s Start / Stop command. Extensible 16-inch coil cable with Push-Pull Connector Plug at handle’s end. With RED Camera, if you assign the sync output for recording, you lose the Timecode option. Therefore, we added an SDI splitter to keep the Timecode option available.

Shape Cheeseplate V-Mount with 15mm Rod Bloc for Canon C300 Mark II

Shape SH-CP300M2 (SHCP300M2, SH/CP300M2, SH CP300M2, CP300M2, sh-cp300m2) Cheeseplate V-Mount with 15mm Rod Bloc for Canon C300 Mark II The 15mm Cheeseplate V-Mount enables V-Mount batteries to power Canon C300 Mark II series cameras. The V-Mount plate for C300 Mark II is fixed on Shape Cheeseplate and includes a ROD BLOC for Mounting. Perfect to Mount any accessories such as; Shape MAGIC ARM, lights, monitors and audio devices. It is also a perfect fit with V-Mount battery plates and features several accessory threads. Also includes an exclusive DC LEMO cable with the standard output voltage for C300 Canon Mark II series cameras.

Shape Cheeseplate V-Mount with 15mm Rod Bloc for Canon C Series Cameras

Shape SH-CP300 (SHCP300, SH/CP300, SH CP300, CP300, sh-cp300) Cheeseplate V-Mount with 15mm Rod Bloc for Canon C Series Cameras The 15mm Cheeseplate V-Mount enables V-Mount batteries to power Canon C300 Mark II series cameras. The V-Mount plate for C300 Mark II is fixed on Shape Cheeseplate and includes a Rob Bloc for mounting. Perfect to mount any accessories such as; Shape Magic Arm, lights, monitors and audio devices. It is also a perfect fit with V-Mount battery plates and features several accessory threads. Also includes an exclusive DC Lemo cable with the standard output voltage for C300 Canon Mark II series cameras.  

Shape Canon C-Series Grip Relocator Inc. Extension Cable

Shape SH-HAC300-RE (SHHAC300-RE, SH/HAC300-RE, SH HAC300-RE, HAC300-RE, sh-hac300-re) Canon C-Series Grip Relocator Inc. Extension Cable The unique design of the C-300 bracket allows the user to remove the C-300 handle from the camera body in order to use with the ball and socket part of SHAPE DOUBLE QUICK HANDLE ROSETTE. By removing the rubber handle off the DOUBLE QUICK HANDLE ROSETTE, you can insert the C-300 bracket and secure it by tightening it with an Allan Key. When installed on the handle, the user has access to several functions available on the C300 handle such as; trigger on/off control, zoom, main menu, lens aperture control and many more! The user also has access to the unique SHAPE red-push button technology that can rotate individually on a 360 degree axis.

Shape Canon C-Series Relocator Extension Cable

Shape SH-C300RE (SHC300RE, SH/C300RE, SH C300RE, C300RE, sh-c300re) Canon C-Series Relocator Extension Cable Extend the reach of your Canon EOS C Series handgrip with this SHAPE Grip Relocator Extension Cable. The coiled design won't sag and tangle up your rig, and stretches for versatile handgrip placement. The 3.5mm connector is compatible with EOS C Series cameras that use the standard handgrip, including the Canon EOS C100, C100 Mark II, C300, C300 Mark II, and C500.

Shape Adapter Plate for Canon EOS C200

Shape SH-C200AP (SHC200AP, SH/C200AP, SH C200AP, C200AP, sh-c200ap) Adapter Plate for Canon EOS C200 The Adapter Plate for Canon EOS C200 from SHAPE attaches to the base of the C200 camera and allows you to mount your camera onto a rig, tripod, gimbal, or drone. The position of the captive screws matches the threaded holes on the base of the C200.

Shape Top Plate for Panasonic AU-EVA1 Camera

Shape SH-EVATP (SH-EVATP, SH/EVATP, SH EVATP, EVATP, sh-evatp) Top Plate for Panasonic AU-EVA1 Camera Mount our AU-EVA1 top plate to your camera with 1/4-20 stainless screws. Lightweight and robust CNC machined aluminum plate designed to support and facilitate the manipulation of your Panasonic AU-EVA1. The top plate offers an array of 1/4" and 3/8" threads which can be used to attach options around the camera, for example, our top handle and EVF mount bracket (also compatible with Panasonic's AU-EVA1 original top handle).

Shape Offset Bracket for ENG Baseplate

Shape SH-ENGOFBRAC (SHENGOFBRAC, SH/ENGOFBRAC, SH ENGOFBRAC, ENGOFBRAC, sh-engofbrac) Offset Bracket for ENG Baseplate This offset bracket allows the use of a shoulder mount in offset mode with baseplate for camcorders. Designed specifically for the SONY PXW Camera Series And Canon XF Camera Series Allows the use of a shoulder mount in OFFSET mode with the new Baseplate for little ENG style camcorders with the EVF on the back of the camera.

Shape 15mm Offset Rod Bloc for Monitor Bracket

Shape SH-MONOFF (SHMONOFF, SH/MONOFF, SH MONOFF, MONOFF, sh-monoff) 15mm Offset Rod Bloc for Monitor Bracket Shape's 15mm Offset Rod Bloc for Monitor Bracket allows you to position an optional on camera monitor/recorder such as the Atomos Shogun on your rod set up. The bracket features two sets of 15mm LWS standard rod clamps mounted together, each with its own spring loaded locking lever. Mounting the Offset Rod Bloc on your rods, allows you to position your monitor / recorder next to your camera to act as a large viewfinder. You may require optional specific mounting hardware for mounting your monitor to a pair of included 15mm rods, that are held secure by the second set of rod clamps that make up the Offset Bloc.

Shape Canon C100 C300 C500 Shoulder Mount

Shape SH-C300SM (SHC300SM, SH/C300SM, SH C300SM, C300SM, sh-c300sm) Canon C100 C300 C500 Shoulder Mount The Canon C100 C300 C500 Shoulder Mount from SHAPE is a shoulder rig with light weight support (LWS) for the Canon Cinema EOS line of movie cameras. As the three have a similar profile, this rig is compatible with the C100, C300, and C500 models. The base plate features specially recessed rods to accommodate the these cameras' uniquely tall stature while ensuring proper centering of lenses in case a matte box is used. The system includes 15mm rods with the standard LWS spacing of 60mm. Because rod-based accessories are standardized you can use virtually any 15mm accessories for LWS you want with this rig. Types of accessories include, follow focuses, matte boxes, mounts for external audio and video recorders, EVFs, battery plates, cages, and more. The included rods are 18" in length and can be extended if needed. Handles and a shoulder pad allow you to use the Canon C100 C300 C500 Shoulder Mount on a tripod or hand-held. The handles feature rosettes and spring-loaded push-buttons so that the angle can be adjusted on the fly without having to loosen a screw. Both the hand grips and the shoulder pad clamp onto the rods using a single red knob that ratchets in case you can't turn it a full circle. Extension rods can be added behind the shoulder pad for attaching weights, battery plates, or other accessories intended for behind the camera or to help balance the load.

Shape Follow Focus Pro

Shape SH-FFPRO (SH_FFPRO, SHFFPRO, SH/FFPRO, SH FFPRO) Follow Focus Pro The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.

Shape Follow Focus Pro Full Kit

Shape SH-FFPROKIT (SH_FFPROKIT, SHFFPROKIT, SH/FFPROKIT, SH FFPROKIT) Follow Focus Pro Full Kit The Shape Follow Focus Pro Full Kit is a dual-sided follow focus system that mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Attach the included extension to add a second focus-wheel for dual-sided control or remove it for single-sided operation. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Both focus wheels feature a removable marking disc, adjustable hard stops, and standard accessory port for using optional whips or cranks.