Core SWX CORE-PBEC-A7FZ PowerBase EDGE Sony A7 FZ100 battery cable includes chip to communicate with Sony Mirrorless cameras

Core SWX CORE-PBEC-A7FZ (COREPBECA7FZ, CORE\PBEC\A7FZ, CORE PBEC A7FZ, PBEC-A7FZ) PowerBase EDGE Sony A7 FZ100 battery cable includes chip to communicate with Sony Mirrorless cameras This Powerbase EDGE Cable from Core SWX allows you to power Sony a9 and select Sony a7 series cameras from the Core SWX Powerbase EDGE battery. The cable runs 6" long and features an NP-FZ100 dummy battery on one end and barrel connector for the Powerbase EDGE on the other.  

Core SWX CORE-GPTA 3-Stud Hotswap Adapter allows two batteries to be mounted simultaneously and hot-swapped

Core SWX CORE-GPTA (COREGPTA, CORE\GPTA, CORE GPTA, GPTA) 3-Stud Hotswap Adapter allows two batteries to be mounted simultaneously and hot-swapped The GP-TA Hotswap adapter mounts directly to the existing 3-Stud/Gold Mount plate on the camera and allows for continuous battery operation. Because the batteries aren’t ‘stacked’ on one another, you can easily remove the depleted battery while the leaving the other battery connected so that their is no down time. It can provide up to 260wh at only 6lbs.

Core SWX CORE-PTC-CSZ Coiled Ptap Cable to Canon Servo Zoom 18

Core SWX CORE-PTC-CSZ (COREPTCCSZ, CORE\PTC\CSZ, CORE PTC CSZ, PTC-CSZ) Coiled Ptap Cable to Canon Servo Zoom 18 CoreSWX PTC-CSZ (CORE-PTC-CSZ) Coiled P-tap Cable to Canon Servo Zoom - 18". Coiled Ptap Cable to Canon Servo Zoom 18

Core SWX CORE-VBPT-D VoltBridge Powertap Dongle with Bluetooth Low Energy Transmitter

Core SWX CORE-VBPT-D (COREVBPTD, CORE VBPT D, CORE/VBPT/D, VBPT-D) VoltBridge Powertap Dongle with Bluetooth Low Energy Transmitter. The CoreSWX VoltBridge is a battery monitoring platform utilising a Bluetooth Low Energy (BLE) UART to transmit smart battery data to iOS/Android devices, allowing the user to monitor and set low battery warnings, via push notifications, on up to 25 devices per tablet/smart phone. The most important element of VoltBridge is that the user can set 3 unique warning levels based on voltage, percentage, or runtime. The technology offered in powertap BLE dongle form enables any device or battery to transmit battery data to the VoltBridge app.

Core SWX CORE-GPS-2PTX-VB VoltBridge Enabled V-Mount Plate 2 Powertaps and 4-pin XLR output for LED Panel Lights with XLR Power Input

Core SWX CORE-GPS-2PTX-VB (COREGPS2PTXVB, CORE GPS 2PTX VB, CORE/GPS/2PTX/VB, GPS-2PTX-VB) VoltBridge Enabled V-Mount Plate 2 Powertaps and 4-pin XLR output for LED Panel Lights with XLR Power Input. VoltBridge is a battery monitoring platform utilizing a Bluetooth Low Energy(BLE) UART to transmit smart battery data to iOS/Android devices, allowing the user to monitor and set low battery warnings, via push notifications, on up to 25 devices per tablet/smart phone. The BLE is installed in the battery mount plates of leading manufacturers’ production equipment. Depending on the battery’s intelligence level, VoltBridge will provide you with at minimum voltage. Some leading brands will yield percentage levels, and in the most advanced packs like Hypercore, hours and minutes will display. The most important element of VoltBridge is that the user can set 3 unique warning levels based on voltage, percentage, or runtime.