Shure Double Lyre Boom Pole Mount for VP89L

Shure Double Lyre Boom Pole Mount for VP89L(SHUA89LMBA) Boom mount adapter secures a VP89L End-Address Shotgun Condenser Microphone to a boom pole. Features include Lyre technology for excellent isolation against handling noise and a soft-feel grip to prevent the microphone from twisting or slipping.

TILTA HDA-SRK Speed Rail Car Mounting Kit

TILTA HDA-SRK (HDA/SRK, HDA_SRK, HDASRK, HDA SRK) Speed Rail Car Mounting Kit Arm your vehicle with the Speed Rail Car Mounting Kit designed for the Hydra Predator and other car mounted shock absorbing arms! This kit allows you to build custom speed rail rigs to support various shock absorbing arms in multiple configurations. The kit is built around 6 pieces of speed rail, of two different sizes, that can be used on their own or interconnected to create longer pieces for specific rigging needs. The 4 adjustable mounting clamps allow you to connect the speed rail in almost any configuration. The kit includes 4 high capacity suction cups, each individually rated for 50 kg or around 110lbs. These suction cups connect to the speed rail via adjustable clamps, allowing them to be placed in almost any position in order to accommodate most vehicles easily. Utilizing 4 suction cups allows you to build an incredibly stabile foundation in which to mount shock absorbing arms or other equipment. The included Front Tow Hook Adapter allows you to connect the system to any vehicle that already has that mounting point. which helps create a secure connection that relies on more than just suction.

Kino Flo 41K Mount Wing w/ Baby Receiver Short (16mm)

Kino Flo 41K Mount Wing w/ Baby Receiver Short (16mm)(MTP-BW41S) The Kino Flo MTP-BW41S Wing Mount with Short Baby Receiver is compatible with new and old fixtures that have Twist-On mating plates. The 5/8" receiver accepts matching 5/8" male light stands and accessories.

Kino Flo 41K Mount Wing w/ Baby Receiver (16mm)

Kino Flo 41K Mount Wing w/ Baby Receiver (16mm)(MTP-BW41) Kino 41K Wing Nut Mount w/ith Baby Receiver Curve (16mm). The redesigned Twist-On fixture mount features a wing knob for easy lock down with the same gripping power and jaws for improved fixture orientation. 

Kondor Blue shoulder pad air- space grey

shoulder pad air- space grey( KON-SPA, KONSPA, KON/SPA)

Kondor Blue shoulder pad air- black

shoulder pad air- black ( KON-SPA_BK, KONSPA_BK, KON/SPA_BK)

Kondor Blue director's monitor v mount kit- raven black

director's monitor v mount kit- raven black( KON-DMVK_BK, KON DMVK_BK, KON/DMVK_BK)   Speed and versatility—those were the two words that continued to inspire the design of the Kondor Blue Director’s Monitor V Mount Kit. At its essence, it’s a nato bracket and a V Mount Battery Plate, but can be expanded out or kept small depending on your production’s needs. The V Mount Kit can be mounted from the top or bottom monitor and pairs perfectly with our Monitor Nato Rails.     Building out from the main Monitor Bracket is our 12” PPSH 15mm rod and capped with Kondor Blue Hand Grips for 15mm rods. The bracket features a unique dual clamping mechanism to prevent the monitor from slipping under its own weight. The top cold shoe is a great spot for a wireless receiver, and the retractable Arri pins are ideally positioned to work in conjunction with the newly designed Kondor Blue D-Tap Hub.   Every component of the V Mount Battery Plate is machined to ensure durability and accuracy—you can confidently set the kit down without fear of the V Mount popping off.   The modular design of the V Mount Kit allows for a variety of setups and accessorizing. We can’t wait to see how it will be used on sets all over the world.

Kondor Blue director's monitor v mount kit- space grey

director's monitor v mount kit- space grey(KON-DMVK, KON-DMVK, KON-DMVK) Speed and versatility—those were the two words that continued to inspire the design of the Kondor Blue Director’s Monitor V Mount Kit. At its essence, it’s a nato bracket and a V Mount Battery Plate, but can be expanded out or kept small depending on your production’s needs. The V Mount Kit can be mounted from the top or bottom monitor and pairs perfectly with our Monitor Nato Rails. Building out from the main Monitor Bracket is our 12” PPSH 15mm rod and capped with Kondor Blue Hand Grips for 15mm rods. The bracket features a unique dual clamping mechanism to prevent the monitor from slipping under its own weight. The top cold shoe is a great spot for a wireless receiver, and the retractable Arri pins are ideally positioned to work in conjunction with the newly designed Kondor Blue D-Tap Hub. Every component of the V Mount Battery Plate is machined to ensure durability and accuracy—you can confidently set the kit down without fear of the V Mount popping off. The  modular design of the V Mount Kit allows for a variety of setups and accessorizing. We can’t wait to see how it will be used on sets all over the world.

Panasonic PAN-KST-WM-UE100-W Wall Mount for AW-UE100 - White

Panasonic PAN-KST-WM-UE100-W (PAN/KST-WM/UE100-W, PAN/KST/WM/UE100/W, PANKSTWMUE100W, PAN KST WM UE100 W) Wall Mount for AW-UE100 - White Wall Mount Bracket for Panasonic AW-UE100 - White. ST Moschkau GmbH has developed a mounting solution for Panasonic PTZ cameras. Each wall mount bracket consists of: A wall mounting plate with 4 elongated holes for 8mm screws. A concealed cable guide opening. An extension arm with integrated storage compartment for power supply units or converters which is equipped with ventilation slots on the top. The camera mounting level on which the original mounting bracket of the camera is mounted.

BirdDog Ceiling Mounting Kit for A200

Ceiling Mounting Kit for A200, BD-A200-CMS (BD_A200_CMS, BD/A200/CMS, A200-CMS, BD A200 CMS)

Matthews 6" Vacuum Cup With 5/8" Pin

6" Vacuum Cup With 5/8" Pin - 427000 Pump until the red marker disappears to create an amazing bond to nonporous surfaces such as car hoods and doors. Use in conjunction with the 4-Way Tilt Plate for interesting camera angles and a camera tie down strap to ensure proper safety precautions. Should you require a smaller vacuum cup for mounting your lights or camera, then the new 4-1/2" cup is recommended to fit into those tight places when either the 10" or 6" vacuum cup is too large.

Shape Sony FX9 push-button view finder mount

SH-FX9VF SHFX9VF SH FX9VF SH/FX9VF Shape Sony FX9 push-button view finder mount Sony FX9 Push-Button Viewfinder Mount.

Shape 15mm LW to 19mm studio snap-on adapter

SH-BL19A SH BL19A SHBL19A SH/BL19A Shape 15mm LW to 19mm studio snap-on adapter SHAPE BL19A (BL-19-A) 15mm LW to 19mm Studio Snap-On Adapter. Designed to adapt 15mm lightweight accessories to 19mm studio spaced rods. Comes with a 19mm Studio offset Rod Clamp and a 15mm lightweight adapter spaced rods. Snap-On design enabling you to attach the support Snaps onto 19mm studio rods without having to remove other rod-mounted accessories. 15mm rod posts for attaching LW 15mm accessories like our Follow Focus(FFPRO). Left side of the clamp designed with 1x Anti-Twist 3/8"-16 accessory mounts. Made with a durable CNC Machined Aluminium and stainless-steel construction.

ATOMOS Ultrasync One ROW Version

ATOMOS Ultrasync One ROW Version AO-ATOMSYON01-ROW (ATOMSYON01, AO_ATOMSYON01_ROW, AO/ATOMSYON01/ROW, AO ATOMSYON01 ROW) Super compact. Lightweight. The flexibility to configure as a transmitter timecode server or as a receiver client device. The battery life allows a run time to easily last the longest shooting day. Integrating the most features to enable advanced timecode and sync options for multicamera workflows. UltraSync ONE is the smallest and most cost-effective, RF-powered wireless timecode and genlock/wordclock solution on the market.

Marshall CV-PTZ-BOX Internal Wall Enclosure For PTZ Cameras

Marshall CV-PTZ-BOX (CV/PTZ/BOX, CV_PTZ_BOX, CVPTZBOX, CV PTZ BOX, cv-ptz-box) Internal Wall Enclosure For PTZ Cameras Mount your CV605, CV610, CV612, CV620, or CV630 PTZ camera within a wall opening with this In-Wall Box Enclosure from Marshall Electronics. The wall enclosure fits inside a cutout in the wall that measures 9.4 x 7.4 x 3.7", and the included mounting kit provides the hardware and tools to secure it into the wall. A camera mounting plate with a 1/4"-20 screw is included to mount your PTZ camera.

Canon CM-V1 Locking EF Mount Kit

Canon CM-V1 (CM_V1, CMV1, CM V1, CM/V1) Locking EF Mount Kit. The Canon CM-V1 Locking EF Mount Kit replaces the Canon EF mount that comes attached to your C500 Mark II. The locking mount maintains the same electronic functionality of the standard EF mount, but locks your lens into the mount to prevent play. Cinema lenses, especially zooms, require that lenses maintain a precise distance from the image plane for best results; any play between the lens and mount can cause the lens to suffer from poor optical or mechanical performance. The locking EF-C mount incorporates the EF mount electronic contacts and allows you to mount virtually any Canon EF mount lens, either the stills variety or the cinema lens variety, on your camera. The kit includes the locking EF mount and a shim kit for precisely adjusting the mount on your camera to ensure the correct flange distance.

Vocas 0600-0920 Director's Monitor Cage Sunshade

Vocas 0600-0920 (0600_0920, 0600/0920, 06000920, 0600-0920) Director's Monitor Cage Sunshade Improve your monitor viewing in daylight or bright locations with the Director's Monitor Cage Sunshade from Vocas. This lightproof, water-resistant shade attaches directly to the Director's Monitor Cage and is compatible with most 7" on-camera monitors. This four-sided shade is adjustable in both height and width and its bottom may be trimmed to provide easier access to the front panel of a touchscreen monitor. The Vocas Director's Monitor Cage Sunshade is constructed of foam and aluminum.

Vocas 0900-0125 Separate 15mm Support for LPL Adaptors

Vocas 0900-0125 (0900_0125, 0900/0125, 09000125, 0900-0125) Separate 15mm Support for LPL Adaptors Separate 15 mm rail support for Vocas LPL adaptors. When using heavy LPL lenses, it's recommended to use support for the adaptor, to protect both the lens mount.

Vocas 0370-0171 V-lock Mount Plate with 4 pin XLR Connector

Vocas 0370-0171 (0370_0171, 0370/0171, 03700171, 0370-0171) V-lock Mount Plate with 4 pin XLR Connector 15 mm Battery adapter plate including V-lock mount and cable for powering cameras with a 4 pin XLR power socket through V-lock batteries. The V-lock mount plate has a 10A fuse and 1x unregulated D-Tap. The length of the power cable is 35 cm. The kit consists of a V-lock mount plate (0370-0170) which is mounted on the battery adapter plate for 15 mm rails (0370-0105), to provide a complete V-lock powering solution on 15 mm rails.

Vocas 0900-0116 Sony E-mount to LPL Adapter

Vocas 0900-0116 (0900_0116, 0900/0116, 09000116, 0900-0116) Sony E-mount to LPL Adapter Sony E-mount to LPL adapter excluding 15 mm rail support. This adapter allows the use of LPL lenses on E-mount cameras. The separate Vocas LPL mount cap is included. *** Please see that this is a special order item.

Metabones MB_SPEF-m43-BT8 EF Lens to BMPCC4K T Speed Booster ULTRA 0.71x

Metabones MB_SPEF-m43-BT8 (MB_SPEF/m43/BT8, MB_SPEF_m43_BT8, MB_SPEF-m43/BT8, mb_spef-m43-bt8) EF Lens to BMPCC4K T Speed Booster ULTRA 0.71x The T Speed Booster ULTRA 0.71x Adapter for Canon EF Lens to BMPCC 4K from Metabones allows a full-frame Canon EF-mount lens to be mounted onto a Blackmagic Design Pocket Cinema Camera 4K MFT-mount camera. While doing so, the adapter's optics help to maximize the connected lens's apparent angle of view while providing a 1-stop increase for the camera over the lens's aperture range. This 0.71x adapter features Cinema EOS lens support for auto iris and servo zoom, and it also includes AF (autofocus) support which requires external 5V power via the micro-USB port. If a lens intended for 35mm film or similarly sized full-frame camera sensors is connected to a camera with a Micro Four Thirds-sized sensor, it would project an image larger than the Micro Four Thirds sensor was built to accept. Able to capture only the center portion of the projected image, the effective angle of view of the lens would be narrowed, creating an in-camera "crop factor." The T Speed Booster ULTRA 0.71x adapter condenses the light from a lens designed for 35mm film or "full-frame" camera sensors and projects it onto a Micro Four Thirds sensor. This allows the Blackmagic Pocket Cinema Camera 4K with a Micro Four Thirds sensor to utilize more of the light gathered by a connected lens, which effectively reduces the crop factor while making available to the sensor an additional 1-stop of light for each of the lens's f/stop settings. This adapter is constructed from aluminum for durability while minimizing weight and its mounting rings are made with brass to further prevent wear and tear. The internal lens elements are designed to provide optical clarity as well as color fidelity, and a detachable tripod foot is included and features 1/4"-20 threads as well as compatibility with Arca-Swiss tripod heads. The T Speed Booster ULTRA 0.71x adapter supports electronic communication between an attached camera and lens. If the lens includes autofocus, image stabilization, and camera-controlled aperture functions, this adapter is intended to allow those features to be used. Also, if an attached lens is capable of generating EXIF metadata when used with a directly compatible camera, the T Speed Booster ULTRA 0.71x adapter is designed to allow that information to be saved along with image files generated with a combination of the lens, a BMPCC 4K camera, and the adapter.

Metabones MB_SPCN-E-BT1 Contax N Lens to Sony E-mount T Speed Booster ULTRA 0.71x Adapter

Metabones MB_SPCN-E-BT1 (MB_SPCN/E/BT1, MB_SPCN_E_BT1, MB_SPCN-E/BT1, mb_spcn-e-bt1) Contax N Lens to Sony E-mount T Speed Booster ULTRA 0.71x Adapter Owners of legendary Carl Zeiss optics in Contax N-Mount have long demanded a trusted migration path to mirrorless cameras. With the advent of Metabones® Contax N-Mount to Sony E-Mount Smart Adapter, the longing is over. Built upon the foundation of Metabones' past success, phase-detection autofocus on A9, A7R Mark III, A7 Mark III, A7R Mark II, A7 Mark II, A6500 and A6300 not only offers pinpoint accuracy but also AF speed significantly surpassing the original Contax N series AF cameras. (Tailored to single-lens reflex cameras with a traditional phase-detection autofocus system, Contax N lenses are not compatible with contrast-detection autofocus mirrorless cameras such as A7S Mark II.) Get a glimpse of the ergonomic experience of the original Contax N1 camera by using the lens' own aperture ring in aperture priority and manual exposure modes on A9, A7 series, A6500 and A6300. Fully automatic exposure and shutter priority are also available. A customizable button on the adapter can be assigned to more than 50 different functions on an A9, A7 series, A6500 or A6300 camera, including depth-of-field preview. Putting that button on the hand-grip side would have matched a genuine Contax N camera, but since that would have been next to Sony's lens release button, we opted to place this customizable button on the other side of the adapter instead, right where the thumb of your left hand is. The workmanship and attention to detail are evident from the signature Metabones design and the two electrical contacts carrying power, which are thicker in the same way as a genuine Contax N series autofocus camera. The inside of the adapter is flocked with felt to minimize internal reflection. A tripod foot compatible with Arca-Swiss style quick release is included. Metabones has a proven track record of firmware stability and timely firmware support. Firmware is user-upgradable via the adapter's micro USB port. Metabones adapters relay distance information from the lens to the camera body to enable full 5-axis in-body image stabilization of the A9, A7 Mark III series, A7 Mark II series and A6500. (The Contax 645 Makro-Planar 4/120 lens does not report distance information and supports only 3-axis in-body image stabilization.) Contax made history by offering the world's first full-frame digital camera, Contax N-Digital, in 2002. All Contax products had been discontinued by 2005, leaving some of the finest autofocus optics ever made in search of a successor. None of these lenses feature optical image stabilization, and this is where the 5-axis in-body image stabilization (SteadyShot INSIDE) of Sony A9, A7 Mark III series, A7 Mark II series and A6500 comes in as a much-needed complement. The heritage lives on, with the very same Carl Zeiss lenses from the dawn of full-frame digital photography now leveraging the latest and greatest mirrorless camera features and poised to benefit from further technological advances in the future. Speed Booster® ULTRA Speed Booster® ULTRA uses an advanced 5-element/4-group optical design by Caldwell Photographic Inc., incorporating ultra-high index tantalum-based optical glass to achieve extraordinary optical performance with improved corner sharpness, distortion and reduced vignetting. Speed Booster® ULTRA has a magnification of 0.71x,  effectively reducing the crop factor of APS-C cameras from 1.5x to 1.07x. The Speed Booster® ULTRA design makes very effective use of exotic materials at the furthest limit of glassmaking technology, and as a result is well corrected for use with virtually all full-frame SLR lenses regardless of exit pupil distance. Thus, the Speed Booster ULTRA performs extremely well with professional-grade f/2.8 zoom lenses such as the Carl Zeiss Vario-Sonnar T*2,8/17-35. Similarly, high-speed fixed focal length lenses such as the Carl Zeiss Planar T* 1,4/50 and Carl Zeiss Planar T* 1,4/85 will be transformed into f/1.0 lenses with excellent contrast and resolution from the center all the way to the edges of the image. Like all Metabones Speed Boosters, the Speed Booster ULTRA is optimized to fully account for the camera’s filter stack located near the sensor surface. This is especially critical at the extremely large apertures made possible by Speed Booster technology. As a result of this careful optimization, the complete range of Contax N and Contax 645 lenses will function flawlessly when adapted to Sony E-mount APS-C format camera bodies. (Speed Booster ULTRA cannot be used to adapt a Contax 645 lens to a full-frame E-Mount camera such as the A9 and the A7 series.)

Metabones MB_PL-X-BT1 ARRI PL Lens to Fujifilm X-mount T CINE Adapter

Metabones MB_PL-X-BT1 (MB_PL/X/BT1, MB_PL_X_BT1, MB_PL-X/BT1, mb_pl-x-bt1) ARRI PL Lens to Fujifilm X-mount T CINE Adapter Mount ARRI PL-mount lenses on your FUJIFILM X-Mount camera with this Metabones Camera Adapter. Aluminum body construction with chrome-plated mounts creates a precision fit with no gap, play, or wiggling. Felt material flocks the inside and bolsters optical quality by minimizing internal light reflections while a satin finish on the outside gives this adapter an OEM look. This adapter is designed to reach infinity focus while retaining the proper registration distance for maintaining optical quality when you are using CRC lenses or other lenses with floating elements. Because your camera's body cap cannot attach to the lens adapter, a rigid-and-removable locking dust cover is provided that allows you to disconnect your lens, leave the adapter mounted, and keep your camera's sensor protected during transportation. Additionally, a removable Arca-type tripod food is included for use with heavier lenses.

Metabones MB_CN-E-BT1 Contax N Lens to Sony E-mount T Smart Adapter

Metabones MB_CN-E-BT1 (MB_CN/E/BT1, MB_CN_E_BT1, MB_CN-E/BT1, mb_cn-e-bt1) Contax N Lens to Sony E-mount T Smart Adapter Owners of legendary Carl Zeiss optics in Contax N-Mount have long demanded a trusted migration path to mirrorless cameras. With the advent of Metabones® Contax N-Mount to Sony E-Mount Smart Adapter, the longing is over. Built upon the foundation of Metabones' past success, phase-detection autofocus on A9, A7R Mark III, A7 Mark III, A7R Mark II, A7 Mark II, A6500 and A6300 not only offers pinpoint accuracy but also AF speed significantly surpassing the original Contax N series AF cameras. (Tailored to single-lens reflex cameras with a traditional phase-detection autofocus system, Contax N lenses are not compatible with contrast-detection autofocus mirrorless cameras such as A7S Mark II.) Get a glimpse of the ergonomic experience of the original Contax N1 camera by using the lens' own aperture ring in aperture priority and manual exposure modes on A9, A7 series, A6500 and A6300. Fully automatic exposure and shutter priority are also available. A customizable button on the adapter can be assigned to more than 50 different functions on an A9, A7 series, A6500 or A6300 camera, including depth-of-field preview. Putting that button on the hand-grip side would have matched a genuine Contax N camera, but since that would have been next to Sony's lens release button, we opted to place this customizable button on the other side of the adapter instead, right where the thumb of your left hand is. The workmanship and attention to detail are evident from the signature Metabones design and the two electrical contacts carrying power, which are thicker in the same way as a genuine Contax N series autofocus camera. The inside of the adapter is flocked with felt to minimize internal reflection. A tripod foot compatible with Arca-Swiss style quick release is included. Metabones has a proven track record of firmware stability and timely firmware support. Firmware is user-upgradable via the adapter's micro USB port. Metabones adapters relay distance information from the lens to the camera body to enable full 5-axis in-body image stabilization of the A9, A7 Mark III series, A7 Mark II series and A6500. (The Contax 645 Makro-Planar 4/120 lens does not report distance information and supports only 3-axis in-body image stabilization.) Contax made history by offering the world's first full-frame digital camera, Contax N-Digital, in 2002. All Contax products had been discontinued by 2005, leaving some of the finest autofocus optics ever made in search of a successor. None of these lenses feature optical image stabilization, and this is where the 5-axis in-body image stabilization (SteadyShot INSIDE) of Sony A9, A7 Mark III series, A7 Mark II series and A6500 comes in as a much-needed complement. The heritage lives on, with the very same Carl Zeiss lenses from the dawn of full-frame digital photography now leveraging the latest and greatest mirrorless camera features and poised to benefit from further technological advances in the future.

Metabones MB_PL-EFR-BT1 ARRI PL Lens to Canon RF mount T CINE Adapter (EOS R)

Metabones MB_PL-EFR-BT1 (MB_PL/EFR/BT1, MB_PL_EFR_BT1, MB_PL-EFR/BT1, mb_pl-efr-bt1) ARRI PL Lens to Canon RF mount T CINE Adapter (EOS R) Mount ARRI PL-mount lenses on your Canon RF-Mount camera with this Metabones Camera Adapter. Aluminum body construction with chrome-plated mounts creates a precision fit with no gap, play, or wiggling. Felt material flocks the inside and bolsters optical quality by minimizing internal light reflections while a satin finish on the outside gives this adapter an OEM look. This adapter is designed to reach infinity focus while retaining the proper registration distance for maintaining optical quality when you are using CRC lenses or other lenses with floating elements. Because your camera's body cap cannot attach to the lens adapter, a rigid-and-removable locking dust cover is provided that allows you to disconnect your lens, leave the adapter mounted, and keep your camera's sensor protected during transportation. Additionally, a removable Arca-type tripod food is included for use with heavier lenses.

Dedolight DV6B Vacuum Mount with Locking Swivel Joint and 5/8" Stud

Dedolight DV6B (DL-DV6B, DL/DV6B, DL_DV6B, dv6b) Vacuum Mount with Locking Swivel Joint and 5/8" Stud Dedolight 152 mm (Approx. 6 Inch) diameter vacuum cup creates a powerful suction, enabling you to mount the dedolight head securely to windows, doors or other flat, nonporous surfaces. The swivel joint has a 16mm (Approx. 5/8 Inch) stud for easy mounting of light fixtures up to 15 kg (Approx. 33 lbs).

Dedolight DV3GA Suction Mount with Articulated Arm for Ledzilla

Dedolight DV3GA (DL-DV3GA, DL/DV3GA, DL_DV3GA, dv3ga) Suction Mount with Articulated Arm for Ledzilla The Dedolight Suction Mount with Articulated Arm for DLOBML makes it possible for you to mount the Ledzilla DLOBML (DedoLight On Board Mini LED) on a window or any other flat plane surface. This 3" (7.5 cm) suction mount comes with a vacuum pump and an articulating arm for maximum flexibility in placing the DLOBML. The Dedolight DLOBML is a tiny-but-powerful on-camera (usually) LED light. Makes it possible to mount the DLOBML light on a window or other flat, smooth surface

Canon Codex Digital Raw Recorder for EOS C700 - Gold Mount

Canon 3165V706 (316-65V706, 316 5V706, 316/5V706, 3165V-706) (EOS/C700, EOS-C700, EOS C700) Codex Digital Raw Recorder for EOS C700 - Gold Mount Record Digital Raw with the C700 Recorder Module Gold Mount  Enjoy the full potential of the C700 camera with the Codex Digital Raw Recorder developed with Canon. Using the attachment accessory included with the C700, simply piggyback the recorder on the C700. The built-in V-mount battery plate powers both the recorder and the camera simultaneously. Hinging on the well-established Codex Digital workflow, this recorder can write 12-bit 4K-resolution raw sensor data to Codex Digital Capture Drive 2.0 SSDs at up to 120 fps. XF-AVC or ProRes files can be recorded in-camera, simultaneously, for versatile workflow options.

Canon Codex Digital Raw Recorder for EOS C700 - V-Mount

Canon 3165V705 (316 5V705, 316-5V705, 316/5V705, 316/5V/705) (EOSC700, EOS/C700, EOS-C700) Codex Digital Raw Recorder for EOS C700 - V-Mount  Enjoy the full potential of the C700 camera with the Codex Digital Raw Recorder developed with Canon. Using the attachment accessory included with the C700, simply piggyback the recorder on the C700. The built-in V-mount battery plate powers both the recorder and the camera simultaneously. Hinging on the well-established Codex Digital workflow, this recorder can write 12-bit 4K-resolution raw sensor data to Codex Digital Capture Drive 2.0 SSDs at up to 120 fps. XF-AVC or ProRes files can be recorded in-camera, simultaneously, for versatile workflow options.  

Metabones MB_SPEF-E-BT4 Canon EF to Emount T CINE Speed Booster ULTRA 0.71x (Black Matt)

Metabones MB_SPEF-E-BT4 (MB_SPEF_E_BT4, MB/SPEF/E/BT4, MB SPEF E BT4) Canon EF to Emount T CINE Speed Booster ULTRA 0.71x (Black Matt) Realize the full potential of your full-frame Canon EF-Mount glass on your APS-C and Super35 format Sony E-Mount cameras with this Metabones Canon EF to Sony E-Mount T Speed Booster ULTRA II 0.71x. Utilizing advanced optics, this adapter will increase the apparent angle of view of your full-frame lens by 0.71x, effectively combating the crop factor of an APS-C camera. This also increases the apparent sharpness of your image while also increasing the maximum aperture by 1 stop, making your full-frame lens look as if it were mounted on a full-frame camera. Further improving on previous generations of Smart Adapters, this fifth-generation model now features a rubber gasket to protect the camera's mount from dust and moisture, offers a status notification LED light to check operation modes, and provides a dedicated switch that controls in-body image stabilization of select cameras. Also, this version is compatible with the Sony PXW-FS7 Mark II video camera. This adapter is equipped with numerous capabilities thanks to the use of a high-performance 32-bit processor. The features include support for both phase-detect and contrast-detect AF systems, as well as the ability to control the aperture from the camera body. Smooth iris effects are possible on select lenses, and 5-axis stabilization is available thanks to communication of distance information with supported lenses. Also, it features a programmable function button, enables electronic (focus-by-wire) manual focusing, transmits EXIF data to the camera, and works with in-lens image stabilization. Additionally, distance and zoom is displayed on certain camcorders and mirrorless cameras, auto magnify can be enabled, and it can automatically switch into APS-C mode, depending on the lens used. Beyond electronic communication, the adapter has many physical advantages as well, such as a black felt flocking on the inside of the adapter that prevents reflections. For larger lenses, there is a removable Arca-type compatible tripod foot with a 1/4"-20 thread on the base. Allows users to adapt a full-frame Canon EF-Mount lens to an APS-C/Super35 Sony E-Mount camera, or a full-frame camera in APS-C mode. Advanced 5-element in 4-group optical construction uses ultra-high index tantalum-based glass, increasing the angle of view of a full-frame lens by 0.71x, and the maximum aperture by one stop. This effectively compensates for the 1.5x crop factor of APS-C cameras and provides an image like that of a full-frame lens on a full-frame camera. Electronic contacts permit transmission of data between the lens and camera enabling autofocus, auto exposure, image stabilization, aperture control from the camera body, saving EXIF information, and more. Status notification LED light on the adapter will show the user what mode the adapter is currently in. Dedicated switch for controlling in-body image stabilization. Programmable function button for rapid access to commonly used settings and features. Support for phase-detect AF with the a7R II, a7 II, a6500, and a6300 cameras. Compatible with Sony PXW-FS7M2 (Mark II) camera. Smooth iris support with select Canon (2009 and later), Tamron (SP series 2013 and later), and Sigma (2016 and later) lenses. Enables electronic manual focusing on lenses, such as the Canon EF 85mm f/1.2L II, that use a focus-by-wire system. Support for distance and zoom display, auto magnify, and auto APS-C Size Capture settings on select cameras. Internal felt flocking prevents reflections. Removable Arca-type compatible tripod foot with 1/4"-20 thread. Powered by camera body.  

Sony Custom Rack Mounting Kit CCU-590P and CCU-TX50

Sony RMM-301 (RMM301, RMM/301, rmm-301)(CCU/590P, CCU_590P)(CCU TX50, CCU/TX50) Custom Rack Mounting Kit CCU-590P and CCU-TX50The Sony RMM-301 is the custom rack mounting kit for both the HDFX-100/S Triax adapters and CCU-550D Triax camera controller. This kit allows the camera controller to be mounted on a standard 19" wide equipment rack system.

Sony Rackmount Kit for PFV-L10 Interface Unit

Sony RMM-10 (RMM10, RMM/10, rmm-10) (PFV/L10, PFV_L10) Rackmount Kit for PFV-L10 Interface Unit The RMM-10 rack mount kit is designed to work with the MVS Series switchers and PFV-L10 interface unit. Standard rack mounting Allows the units to be rack mounted in all standard racks.

MTF MTSUPM43E M/43 & E Mount Support

MTF MTSUPM43E (MTS-UPM43E, MTS UPM43E, MTS/UPM43E, mtsupm43e) M/43 & E Mount Support Designed and built in the UK to compliment all MTF Micro 4/3 and E mount adaptors.     Fits any 15mm support bar system.     Protects camera lens mounts from damage.     Holds all adaptors firmly to avoid lens rotation while adjusting zoom and focus.     Bridge section doubles as a support for long SLR lenses.  

MTF MTB4S16PL B4 2/3" to Super16 PL Adaptor

MTF MTB4S16PL (MTB-4S16PL, MTB 4S16PL, MTB/4S16PL, mtb4s16pl) B4 2/3" to Super16 PL Adaptor For MFT Cameras with Super 16mm Sensors   Less than 1 Stop of Light Loss Use B4 2/3" lenses on a PL mount camera with a Super16 sensor. This means you can take advantage of Sony's new 2K Super16 crop mode on the F5 and F55, as well as the 2K mode on RED's Epic and Scarlet cameras. MTF own stainless steel C Mount. Please note: although it has a PL mount, this adaptor will not cover anything larger than a Super16 size sensor. If you have a sensor that is larger than Super16, you can use the MTF B4 2/3" to Arri PL Adaptor. There will be approximately 0.8 stop of light loss when using this adaptor. We recommend you use HD lenses for the highest quality possible. Other Camera Fits: PL mount, Red Epic PL, Red Scarlet PL, Sony PMW-F5, Sony PMW-F55 Other Lens Fits:   B4 2/3"

Metabones MB_SPALPA-E-BM2 ALPA to Emount Speed Booster ULTRA 0.71x (Black Matt)

Metabones MB_SPALPA-E-BM2 (MB_SPALPA_E_BM2, MB/SPALPA/E/BM2, MB SPALPA E BM2) ALPA to Emount Speed Booster ULTRA 0.71x (Black Matt) The ALPA Lens to Sony E-Mount Camera Speed Booster ULTRA from Metabones improves upon the original Metabones Speed Booster with a 5 element/4 group optical design that incorporates ultra-high refractive index tantalum-based glass for improved sharpness and reduced distortion and vignetting. The Speed Booster ULTRA allows a full frame ALPA lens to be mounted to an APS-C format E-Mount camera and in doing so, increases the angle of view and increases the maximum aperture by approximately one f/stop.  When a lens intended for full frame sensors or 35mm film is mounted to a camera with an APS-C sized sensor, it transmits a larger area of light than the smaller sensor was built to accept and therefore the effective angle of view of the lens decreases. The Speed Booster condenses light from the lens and projects it onto the APS-C sensor allowing the sensor to utilize all of the lens' light and effectively reduces the crop factor of and APS-C E-Mount camera from 1.5x to 1.07x, producing a full-frame angle of view with an APS-C sensor. A corresponding increase in the maximum aperture of one f/stop makes the lens more effective in low-light situations and able to create a shallow depth of field.  Metabones Speed Boosters are quality made using precision-machined brass with chromium plating on both the camera body and the lens side of the booster in order to ensure smooth mounting, quality aesthetic, and durability. This adapter has a detachable tripod foot that is compatible with Arca Swiss, Markins, and Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster. These speed boosters are only fully compatible with mirrorless cameras housing APS-C or smaller image sensors. They will physically fit the Sony full frame mirrorless cameras, but the camera must be set in Crop Mode to fully support the speed booster's functions. Allows a full frame ALPA lens to be mounted to an E-mount APS-C format camera and in doing so, increases the angle of view and increases the maximum aperture by one f/stop. The Speed Booster ULTRA design incorporates ultra-high index tantalum-based optical glass for enhanced optical performance with improved corner sharpness and reduced distortion and vignetting. This glass technology and optical design perform extremely well with professional-grade f/2.8 zoom lenses and high-speed fixed focal length lenses such as a 50mm f/1.2 which will perform as a 35.5mm f/0.9 lens with high contrast and resolution from the center to the edges of the image. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on speed booster and no adjustments are required to fit your lens. Both the camera-side and the lens-side of the speed booster are made of brass which is precision-machined and chrome-plated. The Speed Booster uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens. The exterior features a black satin surface finish. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The speed booster features a detachable tripod foot which is compatible with Arca Swiss, Markins, Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster.  

Metabones MB_SPNFG-X-BM2 Nikon G to Xmount Speed Booster ULTRA 0.71x (Black Matt)

Metabones MB_SPNFG-X-BM2 (MB_SPNFG_X_BM2, MB/SPNFG/X/BM2, MB SPNFG X BM2) Nikon G to Xmount Speed Booster ULTRA 0.71x (Black Matt) The Nikon F-Mount G Lens to Fujifilm X-Mount Camera Speed Booster ULTRA from Metabones improves upon the original Metabones Speed Booster with a 5 element/4 group optical design that incorporates ultra-high refractive index tantalum-based glass for improved sharpness and reduced distortion and vignetting. The Speed Booster ULTRA allows a full frame Nikon F-Mount G lens to be mounted to an APS-C format X-Mount camera and in doing so, increases the angle of view and increases the maximum aperture by approximately one f/stop. It is compatible with NIKKOR F mount and F Mount G lenses including AI and non-AI mounts. When a lens intended for full frame sensors or 35mm film is mounted to a camera with an APS-C sized sensor, it transmits a larger area of light than the smaller sensor was built to accept and therefore the effective angle of view of the lens increases. The Speed Booster condenses light from the lens and projects it onto the APS-C sensor allowing the sensor to utilize all of the lens' light and effectively reduces the crop factor of and APS-C E-Mount camera from 1.5x to 1.07x, producing a full-frame angle of view with an APS-C sensor. A corresponding increase in the maximum aperture of one f/stop makes the lens more effective in low-light situations and able to create a shallow depth of field.  Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster. A built-in clickless aperture control ring enables manual control of aperture from the speed booster. This 8-stop ring with clearly marked 1/2-stop markings is shipped as clickless. Metabones Speed Boosters are quality made, using precision-machined brass with chromium plating on both the camera body and the lens side of the booster in order to ensure smooth mounting, quality aesthetic, and durability. A matte black interior reduces internal reflections and a black satin finish external surface matches with most camera bodies and lenses. This adapter has a tripod foot that is compatible with Arca Swiss, Markins, and Photo Clam ball heads, and can be removed if needed with an included hex key. Allows a full frame Nikon F-Mount G lens to be mounted to an Fujifilm X-mount APS-C format camera and in doing so, increases the angle of view and increases the maximum aperture by one f/stop. The Speed Booster ULTRA design incorporates ultra-high index tantalum-based optical glass for enhanced optical performance with improved corner sharpness and reduced distortion and vignetting. This glass technology and optical design perform extremely well with professional-grade f/2.8 zoom lenses and high-speed fixed focal length lenses such as a 50mm f/1.2 which will perform as a 35.5mm f/0.9 lens with high contrast and resolution from the center to the edges of the image. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on speed booster and no adjustments are required to fit your lens. Both the camera-side and the lens-side of the speed booster are made of brass which is precision-machined and chrome-plated. The Speed Booster uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens. The exterior features a black satin surface finish. A built-in clickless aperture control ring enables manual control of aperture from the speed booster. This 8-stop ring with clearly marked 1/2-stop markings is shipped as clickless. The speed booster is compatible with NIKKOR F mount and F Mount G lenses including AI and non-AI mounts. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The speed booster features a detachable tripod foot which is compatible with Arca Swiss, Markins, Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster. Two hex keys included with the product, one to detach the tripod foot and another to tighten a mounting screw 

Metabones MB_SPNFG-E-BM2 Nikon G to Emount Speed Booster ULTRA 0.71x (Black Matt)

Metabones MB_SPNFG-E-BM2 (MB_SPNFG_E_BM2, MB/SPNFG/E/BM2, MB SPNFG E BM2) Nikon G to Emount Speed Booster ULTRA 0.71x (Black Matt) The Nikon F-Mount Lens to Sony E-Mount Camera Speed Booster ULTRA from Metabones improves upon the original Metabones Speed Booster with a 5 element/4 group optical design that incorporates ultra-high refractive index tantalum-based glass for improved sharpness and reduced distortion and vignetting. The Speed Booster ULTRA allows a full frame Nikon F-Mount lens to be mounted to an APS-C format E-Mount camera and in doing so, increases the angle of view and increases the maximum aperture by approximately one f/stop. It is compatible with NIKKOR F mount and F Mount G lenses including AI and non-AI mounts. When a lens intended for full frame sensors or 35mm film is mounted to a camera with an APS-C sized sensor, it transmits a larger area of light than the smaller sensor was built to accept and therefore the effective angle of view of the lens decreases. The Speed Booster condenses light from the lens and projects it onto the APS-C sensor allowing the sensor to utilize all of the lens' light and effectively reduces the crop factor of and APS-C E-Mount camera from 1.5x to 1.07x, producing a full-frame angle of view with an APS-C sensor. A corresponding increase in the maximum aperture of one f/stop makes the lens more effective in low-light situations and able to create a shallow depth of field.  etabones Speed Boosters are quality made using precision-machined brass with chromium plating on both the camera body and the lens side of the booster in order to ensure smooth mounting, quality aesthetic, and durability. This adapter has a detachable tripod foot that is compatible with Arca Swiss, Markins, and Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster. A built-in clickless aperture control ring enables manual control of aperture from the speed booster. This 8-stop ring with clearly marked 1/2-stop markings is shipped as clickless. These speed boosters are only fully compatible with mirrorless cameras housing APS-C or smaller image sensors. They will physically fit the Sony full frame mirrorless cameras, but the camera must be set in Crop Mode to fully support the speed booster's functions. Allows a full frame Nikon F-Mount lens to be mounted to an E-mount APS-C format camera and in doing so, increases the angle of view and increases the maximum aperture by one f/stop. The Speed Booster ULTRA design incorporates ultra-high index tantalum-based optical glass for enhanced optical performance with improved corner sharpness and reduced distortion and vignetting. This glass technology and optical design perform extremely well with professional-grade f/2.8 zoom lenses and high-speed fixed focal length lenses such as a 50mm f/1.2 which will perform as a 35.5mm f/0.9 lens with high contrast and resolution from the center to the edges of the image. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on speed booster and no adjustments are required to fit your lens. Both the camera-side and the lens-side of the speed booster are made of brass which is precision-machined and chrome-plated. The Speed Booster uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens. The exterior features a black satin surface finish. A built-in clickless aperture control ring enables manual control of aperture from the speed booster. This 8-stop ring with clearly marked 1/2-stop markings is shipped as clickless. The speed booster is compatible with NIKKOR F mount and F Mount G lenses including AI and non-AI mounts. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The speed booster features a detachable tripod foot which is compatible with Arca Swiss, Markins, Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster.  

Metabones MB_SPLR-X-BM2 Leica R to Xmount Speed Booster ULTRA 0.71x (Black Matt)

Metabones MB_SPLR-X-BM2 (MB_SPLR_X_BM2, MB/SPLR/X/BM2, MB SPLR X BM2) Leica R to Xmount Speed Booster ULTRA 0.71x (Black Matt) The Leica R Lens to Fujifilm X-Mount Camera Speed Booster ULTRA from Metabones improves upon the original Metabones Speed Booster with a 5 element/4 group optical design that incorporates ultra-high refractive index tantalum-based glass for improved sharpness and reduced distortion and vignetting. The Speed Booster ULTRA allows a full frame Leica R lens to be mounted to an APS-C format X-Mount camera and in doing so, increases the angle of view and increases the maximum aperture by approximately one f/stop.  When a lens intended for full frame sensors or 35mm film is mounted to a camera with an APS-C sized sensor, it transmits a larger area of light than the smaller sensor was built to accept and therefore the effective angle of view of the lens increases. The Speed Booster condenses light from the lens and projects it onto the APS-C sensor allowing the sensor to utilize all of the lens' light and effectively reduces the crop factor of and APS-C E-Mount camera from 1.5x to 1.07x, producing a full-frame angle of view with an APS-C sensor. A corresponding increase in the maximum aperture of one f/stop makes the lens more effective in low-light situations and able to create a shallow depth of field.  Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster.  Metabones Speed Boosters are quality made, using precision-machined brass with chromium plating on both the camera body and the lens side of the booster in order to ensure smooth mounting, quality aesthetic, and durability. A matte black interior reduces internal reflections and a black satin finish external surface matches with most camera bodies and lenses. This adapter has a tripod foot that is compatible with Arca Swiss, Markins, and Photo Clam ball heads, and can be removed if needed with an included hex key. Allows a full frame Leica R lens to be mounted to an Fujifilm X-mount APS-C format camera and in doing so, increases the angle of view and increases the maximum aperture by one f/stop. The Speed Booster ULTRA design incorporates ultra-high index tantalum-based optical glass for enhanced optical performance with improved corner sharpness and reduced distortion and vignetting. This glass technology and optical design perform extremely well with professional-grade f/2.8 zoom lenses and high-speed fixed focal length lenses such as a 50mm f/1.2 which will perform as a 35.5mm f/0.9 lens with high contrast and resolution from the center to the edges of the image. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on speed booster and no adjustments are required to fit your lens. Both the camera-side and the lens-side of the speed booster are made of brass which is precision-machined and chrome-plated. The Speed Booster uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens. The exterior features a black satin surface finish. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The speed booster features a detachable tripod foot which is compatible with Arca Swiss, Markins, Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster. Two hex keys included with the product, one to detach the tripod foot and another to tighten a mounting screw  

Metabones MB_SPLR-E-BM2 Leica R to Emount Speed Booster ULTRA 0.71x (Black Matt)

Metabones MB_SPLR-E-BM2 (MB_SPLR_E_BM2, MB/SPLR/E/BM2, MB SPLR E BM2) Leica R to Emount Speed Booster ULTRA 0.71x (Black Matt) The Leica R Mount Lens to Sony E-Mount Camera Speed Booster ULTRA from Metabones improves upon the original Metabones Speed Booster with a 5 element/4 group optical design that incorporates ultra-high refractive index tantalum-based glass for improved sharpness and reduced distortion and vignetting. The Speed Booster ULTRA allows a full frame Leica R Mount lens to be mounted to an APS-C format E-Mount camera and in doing so, increases the angle of view and increases the maximum aperture by approximately one f/stop.  When a lens intended for full frame sensors or 35mm film is mounted to a camera with an APS-C sized sensor, it transmits a larger area of light than the smaller sensor was built to accept and therefore the effective angle of view of the lens decreases. The Speed Booster condenses light from the lens and projects it onto the APS-C sensor allowing the sensor to utilize all of the lens' light and effectively reduces the crop factor of and APS-C E-Mount camera from 1.5x to 1.07x, producing a full-frame angle of view with an APS-C sensor. A corresponding increase in the maximum aperture of one f/stop makes the lens more effective in low-light situations and able to create a shallow depth of field.  Metabones Speed Boosters are quality made using precision-machined brass with chromium plating on both the camera body and the lens side of the booster in order to ensure smooth mounting, quality aesthetic, and durability. This adapter has a detachable tripod foot that is compatible with Arca Swiss, Markins, and Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster. These speed boosters are only fully compatible with mirrorless cameras housing APS-C or smaller image sensors. They will physically fit the Sony full frame mirrorless cameras, but the camera must be set in Crop Mode to fully support the speed booster's functions. Allows a full frame Leica R Mount lens to be mounted to an E-mount APS-C format camera and in doing so, increases the angle of view and increases the maximum aperture by one f/stop. The Speed Booster ULTRA design incorporates ultra-high index tantalum-based optical glass for enhanced optical performance with improved corner sharpness and reduced distortion and vignetting. This glass technology and optical design perform extremely well with professional-grade f/2.8 zoom lenses and high-speed fixed focal length lenses such as a 50mm f/1.2 which will perform as a 35.5mm f/0.9 lens with high contrast and resolution from the center to the edges of the image. Precise fit and solid connection - lens has no play, gap or wiggling when mounted on speed booster and no adjustments are required to fit your lens. Both the camera-side and the lens-side of the speed booster are made of brass which is precision-machined and chrome-plated. The Speed Booster uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens. The exterior features a black satin surface finish. Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. The speed booster features a detachable tripod foot which is compatible with Arca Swiss, Markins, Photo Clam ball heads. Although the lens will fit physically, automatic diaphragm (AE metering), or other auto functions are not retained using this speed booster.  

Metabones MB_EF-m43-BT2 Canon EF to Micro Four Thirds T Adapter (Black Matt)

Metabones MB_EF-m43-BT2 (MB_EF_m43_BT2, MB/EF/m43/BT2, MB EF m43 BT2) Canon EF to Micro Four Thirds T Adapter (Black Matt) The T Smart Adapter for Canon EF or Canon EF-S Mount Lens to Select Micro Four Thirds-Mount Cameras from Metabones allows a Canon EF or EF-S mount lens to be mounted onto a Micro Four Thirds-mount camera. While doing so, the adapter is designed to support electronic communication between an attached camera and lens. If the lens includes autofocus, image stabilization, as well as camera-controlled aperture functions, this adapter is intended to allow those features to be used. If an attached lens is also capable of generating EXIF metadata when used with a directly compatible camera, the T Smart Adapter is designed to allow that information to be saved along with image files generated with a combination of the lens, a Micro Four Thirds-mount camera, and the adapter. By enabling camera-controlled aperture functions for a Canon EF or Canon EF-S Mount Lens when used with a Micro Four Thirds-mount camera, program, shutter-priority, aperture-priority, as well as manual modes can be set and used through the camera. Power for these functions is transferred from the camera to the lens, and when manual focusing is preferred with a compatible electronic lens and a Panasonic camera, an integrated jog dial that allows incremental aperture adjustment can be depressed to open the lens's aperture diaphragm to its largest setting. The resulting shallow depth-of-field can then be used to help ensure focus accuracy. When an image is taken with the T Smart Adapter, a matte black internal coating minimizes the potential for reflections within the adapter barrel, which could otherwise result in unwanted glare within the image. The T Smart Adapter is constructed from aluminum alloy for durability while minimizing weight. Its mounting rings are made with brass to further prevent wear-and-tear, and a detachable tripod foot is included that features 3/8" threads as well as compatibility with Arca-Swiss tripod heads. While the T Smart Adapter allows a Canon EF or EF-S mount lens to be mounted onto any Micro Four Thirds-mount camera, any functions that involve electronic communication currently require a Panasonic-brand Micro Four Thirds-mount camera. Allows a Canon EF or EF-S mount lens to be used with a Micro Four Thirds-mount camera Allows third-party, full-frame or APS-C EF-mount lenses to be used with a Micro Four Thirds-mount camera Supports electronic communication between camera and lens to enable autofocus, image stabilization, on-camera aperture control, and EXIF metadata generation when possible Internal coating minimizes reflections within the adapter barrel Integrated jog dial for incremental aperture adjustment and push-button access to lens's widest aperture setting when used with a compatible Panasonic camera Detachable, Arca-Swiss compatible tripod foot with 3/8" threads Aluminum-alloy components for weight reduction Brass mounting rings further prevent wear-and-tear Locking mechanism for secure attachment of lens with push-button release      

MTF MTABM43 ARRI BAYONET to MICRO 4/3 Adaptor

MTF MTABM43 (MT ABM43, MT-ABM43, MT/ABM43, mtabm43) ARRI BAYONET to MICRO 4/3 Adaptor Designed with the Blackmagic Pocket Cinema Camera in mind, MTF are proud to introduce the brand new Arri Bayonet to Micro Four Thirds adaptor. This adaptor allows you to use Arri Bayonet lenses on your new Pocket Camera, or on any other camera with a Micro Four Thirds mount.     MTF own stainless steel Mount. Provision to accept the MTF M/43 & E Mount Support. Please note: Super16 Arri Bayonet lenses will not cover cameras with a sensor larger than Super16. This includes the original Blackmagic Cinema Camera mFT and Panasonic Lumix cameras. Only 35mm Arri Bayonet lenses will cover these cameras with this adaptor. Other Camera Fits: Blackmagic Cinema Camera mFT, Blackmagic Pocket Cinema Camera, Micro Four Thirds Other Lens Fits:   Arri Bayonet

MTF Mtpl2x35 Pl 2x Extender

MTF MTPL2X35 (MT PL2X35, MT-PL2X35, MT/PL2X35, mtpl2x35) PL 2X Extender Double the focal length of your PL lens. Designed for use with 35mm and Super 35mm PL mount lenses.     MTF own stainless steel C mount. Please note: there is a light loss of 2 stops when using this adaptor. Other Camera Fits: AJA CION, Arri Alexa, Blackmagic URSA PL, Canon C300 PL, Canon C500 PL, PL mount, Red Epic PL, Red One PL, Red Scarlet PL, Sony PMW-F3, Sony PMW-F5, Sony PMW-F55 Other Lens Fits:   PL Mount  

MTF MTCANFDFZ CANON FD to SONY FZ Adaptor

MTF MTCANFDFZ (MT CANFDFZ, MT-CANFDFZ, MT/CANFDFZ, mtcanfdfz) CANON FD to SONY FZ Adaptor The worlds first Canon FD to Sony FZ adaptor. This adaptor allows you to Fit any Canon FD lens to Sony's new FZ-mount cameras, such as the F3, F5 and F55. (Please note. Using this adaptor will introduce a magnification factor of 1.5X with full frame lenses)     Original design for intuitive operation     Compatible with any current and future Sony FZ-mount cameras, such as the F3, F5 and F55     Built-in aperture activation pin     Flat black coated internal baffle     Impossible to damage lens during fitting and operation Other Camera Fits: Sony PMW-F3, Sony PMW-F5, Sony PMW-F55 Other Lens Fits:   Canon FD

MTF MTCANEFFZ Canon EF to Sony FZ Adaptor

MTF MTCANEFFZ (MT CANEFFZ, MT-CANEFFZ, MT/CANEFFZ, mtcaneffz) Canon EF to Sony FZ Adaptor   Canon EF to Sony FZ Adaptor An original design by Mike Tapa This is a mechanical adaptor with no electronics. The aperture on Canon EF lenses must be set beforehand. This adaptor allows you to fit any Canon EF mounted lens to Sony's new FZ-mount camera, such as the F3, F5 and F55. (Please note: Using this adaptor will introduce a magnification factor of 1.5X with full frame lenses)     Compatible with any current and future Sony FZ-mount cameras, such as the F3, F5 and F55.     Original design for intuitive operation.     Flat black coated internal baffle.     Impossible to damage lens during fitting and operation.   Other Camera Fits: Sony PMW-F3, Sony PMW-F5, Sony PMW-F55 Other Lens Fits: Canon EF

MTF MTB4CANEF B4 2/3" to Canon EF Adaptor

MTF MTB4CANEF (MTB 4CANEF, MTB-4CANEF, MTB/4CANEF, mtb4canef) B4 2/3" to Canon EF Adaptor The B4 2/3" broadcast lens to Canon EF adaptor is a useful way of utilising all of your B4 mounted lenses on APS-C and Super35 sized sensor cameras such as the Canon 7D, the Canon C300 and the Blackmagic Cinema Camera EF, as well as the upcoming Blackmagic Production Camera 4K. Please note: if using the adaptor with a Canon 1D C, the camera must be in video mode set to Super35 crop.     Solid all aluminium construction     Chrome plated Canon EF mount     Multi layer coated optics     Complete with support bridge     Complete with front and rear caps (Can only be used on B4 2/3" lenses with built in 2X extender engaged, HD lenses recomended)

Shape Canon C100 C300 C500 Shoulder Mount

Shape SH-C300SM (SHC300SM, SH/C300SM, SH C300SM, C300SM, sh-c300sm) Canon C100 C300 C500 Shoulder Mount The Canon C100 C300 C500 Shoulder Mount from SHAPE is a shoulder rig with light weight support (LWS) for the Canon Cinema EOS line of movie cameras. As the three have a similar profile, this rig is compatible with the C100, C300, and C500 models. The base plate features specially recessed rods to accommodate the these cameras' uniquely tall stature while ensuring proper centering of lenses in case a matte box is used. The system includes 15mm rods with the standard LWS spacing of 60mm. Because rod-based accessories are standardized you can use virtually any 15mm accessories for LWS you want with this rig. Types of accessories include, follow focuses, matte boxes, mounts for external audio and video recorders, EVFs, battery plates, cages, and more. The included rods are 18" in length and can be extended if needed. Handles and a shoulder pad allow you to use the Canon C100 C300 C500 Shoulder Mount on a tripod or hand-held. The handles feature rosettes and spring-loaded push-buttons so that the angle can be adjusted on the fly without having to loosen a screw. Both the hand grips and the shoulder pad clamp onto the rods using a single red knob that ratchets in case you can't turn it a full circle. Extension rods can be added behind the shoulder pad for attaching weights, battery plates, or other accessories intended for behind the camera or to help balance the load.

IDX BCC-CPA Power Adapter Kit for Blackmagic Cinema Camera

IDX BCC-CP(A) (BCCCPA, BCC CP A, BCC/CP/A, bcc-cp(a)) Adapter Kit for Blackmagic Cinema Camera. DX BCC-CP(A) (BCCCP-A) Blackmagic Cinema Camera Power Kit Containing 1x ET-PV2BM V-Mount Adapter and 1x A-CP(A) Cheese Plate and Clamp. Versatile Cheese Plate and ClampThe A-CP(A) aluminum cheese plate and clamp allows to attach IDX V-Mount P-V2 series plates on rod system in variety of mounting positions. Compatible with P-V2, P-VS2, P-V257, P-V284, P-V212, A-E2EOSC and ET-PV2BM for powering various cameras on a rod systemV-Mount Adaptor for Blackmagic Cinema CameraThe ET-PV2BM is designed to allow ENDURA batteries to power the Blackmagic Cinema Camera.  Based on the popular IDX V-Plate chassis with integral DC cable, it can be mounted on the A-CP(A) Universal Mount Cheese Plate for use on rig systems.  The ET-PV2BM also features 1 x D-Tap output (battery voltage) to power accessories.The ET-PV2BM and A-CP(A) together create the BCC-CP(A). If you are using the Blackmagic Cinema Camera on a 15mm mini rod system, the BCC-CP(A) is the perfect power accessory

MTF B4 2/3" to Arri PL adaptor

B4 2/3" to Arri PL adaptor Magnification:Lens Type  :   Mag. FactorSpec Build Quality:HE30 Aluminium Body Stainless steel PL mountWeight: 250 g

MTF B4 2/3" to 1/2" JVC Adaptor

B4 2/3" to 1/2" JVC Adaptor Magnification:   Lens Type:     Mag. FactorB4 2/3"     1.375XSpec Build Quality:HE30 aluminium bodyWeight: 60 g

MTF Nikon to Sony PMW-EX3 Adaptor

Nikon to Sony PMW-EX3 Adaptor Magnification:Lens Type:     Mag. FactorFull Frame     5.4XSpec Build Quality:Anodised HE30 aluminium body, brass nickel-plated Nikon mount.Weight: 100 g

MTF Canon FD to Sony PMW-EX3 Adaptor

Canon FD to Sony PMW-EX3 Adaptor Magnification:  Lens Type:     Mag. FactorCanon FD     5.4XSpec Build Quality:HE30 aluminium bodyWeight: 100 g

MTF Arri PL to Sony PMW-EX3

Arri PL to Sony PMW-EX3 Magnification:   Lens Type:     Mag. FactorPL 35mm     3.875XSpec Build Quality:HE30 aluminium bodyWeight: 150 g

MTF Canon EF to Sony PMW-EX3 adaptor

Canon EF to Sony PMW-EX3 adaptor Magnification:    Lens Type :    Mag. FactorFull Frame     5.4XSpec Build Quality:HE30 aluminium body, Brass Nickel plated Canon EF mountWeight: 100 g

MTF Nikon G to C mount adaptor

Nikon G to C mount adaptor Magnification:Lens Type     Mag. FactorSpec Build Quality:Weight: 100 g

MTF Canon EF to Micro 4/3 adaptor

Canon EF to Micro 4/3 adaptor Magnification:Lens Type :    Mag. FactorSpec Build Quality:Weight: 145 g

MTF Canon FD to Micro 4/3 Adaptor

Canon FD to Micro 4/3 Adaptor Lens Type :    Mag. FactorFull Frame     2XSpec Build Quality:HE30 aluminium body, stainless steel Micro 4/3 mountWeight: 100 g

MTF PL to Micro 4/3 Adaptor

PL to Micro 4/3 Adaptor Lens Type  :   Mag. FactorPL 35mm     1.5XSpec Build Quality:HE30 aluminium body, stainless steel Micro 4/3 mountWeight: 160 g

MTF B4 2/3" to Micro 4/3 Adaptor

B4 2/3" to Micro 4/3 Adaptor Lens Type  :   Mag. FactorNA     NASpec Build Quality:HE30 aluminium body, stainless steel Micro 4/3 mountWeight: 190 g

MTF Nikon G to Micro 4/3 Adaptor

Nikon G to Micro 4/3 Adaptor Lens Type  :   Mag. FactorFull Frame     2XNikon DX     1XSpec Build Quality:HE30 aluminium body, Brass Nickel plated Nikon mount, stainless steel Micro 4/3 mountWeight: 150 g

MTF MTB4SEM B4 2/3" to Sony E Mount Adaptor

MTF MTB4SEM  B4 2/3" to Sony E Mount Adaptor The B4 2/3" broadcast lens to Sony E mount adaptor is a useful way of utilizing all of your B4 mounted lenses on the Sony FS7 This adaptor is designed specifically to be used on the FS7 in 2k mode only. Can only be used on B4 2/3" lenses with built in 2X extender engaged, HD lenses recomended

MTF Canon FD to Sony E Mount Adaptor

Canon FD to Sony E Mount Adaptor Lens Type   :  Mag. FactorFull Frame     1.54XSpec Build Quality:HE30 aluminium body, stainless steel E mountWeight: 0 g

MTF PL to Sony E mount Adaptor

PL to Sony E mount Adaptor Lens Type :    Mag. FactorPL 35mm :    1.1XSpec Build Quality:HE30 aluminium body, stainless steel E mountWeight: 200 g  

Vocas 0350-0415 Monitor Support SHORT for 15 mm Rails

Vocas 0350-0415 (0350_0415, 0350/0415, 03500415, 0350-0415) Monitor Support SHORT for 15 mm Rails Vocas (0350-0415) Monitor support SHORT for 15mm bars. A monitor support that attaches directly to standard 15mm rails and allows the use of any monitor that can be mounted on a 1/4" screw. This support includes a Noga HoldIT arm of 4.2" in lenght

Vocas 0350-0410 Monitor Support LONG for 15 mm Rails

Vocas 0350-0410 (0350_0410, 0350/0410, 03500410, 0350-0410) Monitor Support LONG for 15 mm Rails The Vocas Monitor Support offers direct attachment to standard 15mm rails and provides support to monitors in professional video environments. Combined with the standard 15mm rails, you can use the Monitor Support with all monitors that can be mounted on 1/4" screws. Optimal viewing is possible due to the multiple position adjustment of the arm that attaches to the 15mm bracket. You can use the monitor support for monitors weighing up to 3.3 lb. For professional video environments Offers direct attachment to standard 15mm rails Allows use of all monitors mounted on 1/4" screws Offers optimal viewing via multiple position adjustment of the arm that attaches to the 15mm bracket Supports all monitors weighing up to 3.3 lb