DPA Modular Active Cable, MicroDot, Side, 1.8 m (5.9 ft)

DPA MMP-GS (MMPGS, MMP/GS, MMP GS, MMP.GS) Modular Active Cable, MicroDot, Side, 1.8 m (5.9 ft) The MMP-G Modular Active Cable is an ultra-transparent preamplifier. It can be combined with any modular capsule in the d:dicate Recording Microphones Series. The MMP-G also features a MicroDot connector, which allows the microphone to be linked with all leading wireless miking solutions through the extensive range of DPA adapters.  The MMP-G is available in two variations, MMP-GR with the cable extending from the rear or MMP-GS with the cable extending from the side. For one of the highest-quality wireless instrument miking solutions on the market, attach your favorite d:dicate Microphone Capsule to a MMP-G Modular Active Cable. Then you can seamlessly connect them to the GSM4000 Gooseneck Mount for d:dicate. This combination allows you to create a wireless solution with your favorite d:dicateMicrophone.

DPA Modular Active Cable, MicroDot, Rear, 1.8 m (5.9 ft)

DPA MMP-GR (MMPGR, MMP/GR, MMP_GR, MMP.GR) Modular Active Cable, MicroDot, Rear, 1.8 m (5.9 ft) The MMP-G Modular Active Cable is an ultra-transparent preamplifier. It can be combined with any modular capsule in the d:dicate™ Recording Microphones Series. The MMP-G also features a MicroDot connector, which allows the microphone to be linked with all leading wireless miking solutions through the extensive range of DPA adapters.  The MMP-G is available in two variations, MMP-GR with the cable extending from the rear or MMP-GS with the cable extending from the side.

DPA Modular Active Cable, XLR, Side, 3 m (9.8 ft)

DPA MMP-ES (MMPES, MMP/ES, MMP ES, MMP.ES) Modular Active Cable, XLR, Side, 3 m (9.8 ft)  The d:dicate MMP-ES Modular Active Side Cable by DPA Microphones is a microphone preamp. It is used with any d:dicate modular capsule for capturing audio in applications such as with hanging mics or low-profile table or instrument mics. The MMP-ES features a high quality preamp built with a 12mm housing and a 3-pin XLR connector. The capsule attaches to a cable with a length of 3 meters or optionally up to 30 meters. The preamp features impedance balancing with active drive to reject radio frequency interference. This model is built with a side mounted cable. The preamp is ultra transparent and features the DPA designed impedance balancing with active drive to reject radio frequency interference Can be combined with any DPA d:dicate modular capsule

DPA d:dicate 2011ES Twin Diaphragm Cardioid Mic, Side Cable, XLR

DPA 2011ES (2011/ES, 2011 ES, 2011_ES, 2011.ES) d:dicate 2011ES Twin Diaphragm Cardioid Mic, Side Cable, XLR  The 2011ES Cardioid Microphone, Active Side Cable from DPA is designed for capturing audio and can be used in various environments, including theater, recording studios, broadcast TV, and similar applications. It features a cardioid directional pattern and a frequency range of 20 Hz to 20 kHz. The microphone contains an MMP-E active cable preamp, which splits amplification and phantom power duties. Additionally, the microphone offers a modular capsule with high-quality directivity control and radio frequency interference rejection. The 2011ER capsule is also suitable for capturing instruments in sound reinforcement applications. The capsule's twin diaphragm is designed to provide a fast impulse response and large frequency bandwidth, resulting in low inherent noise. The microphone's modular design allows users to manually switch optional capsules for enhanced versatility and performance. The preamp terminates with a 12mm attachment at one end and an XLR connector at the other. The 2011ER features a compact appearance and includes a SM4000-C Suspension Mount.

DPA d:dicate 2011ER Twin Diaphragm Cardioid Mic, Rear Cable, XLR

DPA 2011ER (2011/ER, 2011 ER, 2011_ER, 2011.ER) d:dicate 2011ER Twin Diaphragm Cardioid Mic, Rear Cable, XLR The 2011ER Cardioid Microphone, Active Rear Cable from DPA is designed for capturing audio and can be used in various environments, including theater, recording studios, broadcast TV, and similar applications. It features a cardioid directional pattern and a frequency range of 20 Hz to 20 kHz. The microphone contains an MMP-E active cable preamp, which splits amplification and phantom power duties. Additionally, the microphone offers a modular capsule with high-quality directivity control and radio frequency interference rejection. The 2011ER capsule is also suitable for capturing instruments in sound reinforcement applications. The capsule's twin diaphragm is designed to provide a fast impulse response and large frequency bandwidth, resulting in low inherent noise. The microphone's modular design allows users to manually switch optional capsules for enhanced versatility and performance. The preamp terminates with a 12mm attachment at one end and an XLR connector at the other. The 2011ER features a compact appearance and includes a SM4000-C Suspension Mount.

DPA Mic Base, Black, MicroDot

DPA DM6000-BM (DM6000BM, DM6000/BM, DM6000_BM, DM6000.BM) Mic Base, Black, MicroDot The Microphone Base comes with a built-in shock mount system that gives very good suppression of unwanted handling noise from a table or the like. Hidden mounting holes below the top cover make it possible to permanently affix the unit to a flat surface for an exclusive appearance. The audio cables are an integral part of the Microphone Base unit.