Manfrotto MAN-154B 154 Triple Microphone Holder Bar (Black)

Manfrotto MAN-154B (MAN154B, MAN/154B, 154B, MAN 154B) 154 Triple Microphone Holder Bar (Black). The Manfrotto 154 Triple Microphone Holder accommodates up to three microphones of any type. The entire bar mounts onto a stand or bracket with 16 mm pin and measures 65cm in length.

Manfrotto MAN-MBOOMCFVR-S Virtual Reality Carbon Fiber Extension Boom Small

Manfrotto MAN-MBOOMCFVR-S (MAN_MBOOMCFVR_S, MAN/MBOOMCFVR/S, MAN MBOOMCFVR S) Virtual Reality Carbon Fiber Extension Boom Small The Carbon Fiber Boom Pole for VR Camera (Medium) from Manfrotto provides rigid, lightweight support for your virtual reality camera weighing up to 4.4 pounds. This versatile, 4-section pole reduces vibrations, and extends from 2' to 6.6', enabling you to shoot above your surroundings. Rubber-gripped anti-twist locks fasten quickly and firmly, preventing unintended slips. For increased camera compatibility, the VR Camera Boom Pole features an interchangeable mount with 3/8"-16 and 1/4"-20 screws as well as a 1/4"-20 female thread. The 1/4"-20 thread enables you to mount the pole to a tripod or other support, increasing your camera position options.

Manfrotto FF3249 Telescop Post 60 To 128cm

Manfrotto FF3249 (FF 3249, FF-3249 FF/3249 3249) Telescop Post 60 To 128cm   Telscpic Post Extendable from 60-128cm A telescopic system for the balanced suspension of loads. Adjustable in height with automatic positioning at the desired position. A female attachment with safety plug and locking lever is fitted at each end. The safety plug has a latch with push-button release latch with push-button release. To adjust the balance of the load, rotate the handle clockwise or counterclockwise. It sustains loads from 1.5kg up to 12kg max.

Manfrotto FF3514N86 Pantograph 3,8M W/5/8"Attachm

Manfrotto FF3514N86 Pantograph 3,8M W/5/8"Attachm The pantograph is made of aluminium (P-Al MgSi UNI 3569) and manufactured according to DIN 15560-46. The attachments at both ends of the pantograph are 16mm, male on the bottom and female on the top. The load is supported by a steel cable of 2mm. diameter (safety factor 12). Loads up to 12Kg can be suspended using only the patented friction device, while loads up to a maximum of 18kg require the use of the optional springs. The pantograph can be regulated to keep suspended loads from 1 to 18kg perfectly balanced. By turning the coulored notched ring you can adjust the pantograph’s friction; this will ensure that the load remains stable when set in position, but that it will move smoothly up and down when necessary. In any case, it is always advisable to use the springs to aid raising your pantograph. When choosing the additional spring(s) for your pantograph, you will first need to know exactly which model of pantograph you have, in order that you can select the spring of the correct length. If you have one of the new compact pantographs (with grey-painted ''scissors''), look at the colour of notched ring the 2m version has a red notched ring, while the 3.8m version has a blue notched ring. After having identified the length of the pantograph, choose the appropriate spring(s) by refering to the table below.

Manfrotto MAN-H2000M Avenger Modular Overhead Frame 20x20

Manfrotto MAN-H2000M (MAN/H2000M, MAN_H2000M, MANH2000M, MAN H2000M, H2000M, man-h2000m) Avenger Modular Overhead Frame 20x20 These heavy duty 3mm square section tubes slot and pin-lock together, rapidly providing a stable frame for lighting control textiles. By reducing or adding tubes it is possible to create frames of any size.

Manfrotto 427B-4-0 Operating Pole 1.4m to 4.0m

Manfrotto 427B-4-0 (427B/4/0, 427B_4_0, 427B40, 427B 4 0, 427b-4-0, 427B-4,0) Operating Pole 1.4m to 4.0m The Manfrotto 427B-4,0 Operating Pole has 4 sections and 3 risers. With a diameter of 28, 24, 20, 16mm. The minimum extension is 160cm and the max extension is 400cm. The closed length is 142cm.

Manfrotto 427B-6-5 Operating Pole 1.9m to 6.5m

Manfrotto 427B-6-5 (427B/6/5, 427B_6_5, 427B65, 427B 6 5, 427b-6-5, 427B-6,5) Operating Pole 1.9m to 6.5m The Manfrotto 427B-6,5 Operating Pole has 4 sections and 3 risers. With a diameter of 28, 24, 20, 16mm. The minimum extension is 220cm and the max extension is 650cm. The closed length is 200cm.