Godox V1ProS Sony Camera Flash with SU-1

Godox GD-V1ProS (GD/V1ProS, GD_V1ProS, GDV1ProS, GD V1ProS) V1ProS Sony Camera Flash with SU-1 The Godox V1Pro TTL Li-ion Round Head Camera Flash Speedlight is an updated version of the V1, which features a revolutionary round shape instead of the traditional rectangular shape. The Godox V1Pro's round flash head enables it to produce smooth-gradated lighting with natural-looking fall-off and more pleasing results. The V1Pro TTL speedlight also features a magnetic modifier mount, enabling it to be used with a plethora of magnetic modifiers available for it. Powered by a High-Capacity 7.2V/2980mAh Rechargeable Lithium-ion Battery and featuring TTL and High-Speed Sync, Stroboscopic Multi-Flash, and a built-in 2.4GHz flash receiver, the Godox V1Pro is perfect for shooting Weddings, Portraits, Events, Fashion, Sports, Fitness and Advertising. Up to 100 Continuous Full-Powered Shots The V1Pro round head speedlight has redefined what's possible in photography. Breaking free from the constraints of thermal protection, the Godox V1Pro can produce a staggering one hundred full-powered consecutive flashes, allowing your creativity to run wild without missing any key moments. The New and Innovative SU-1 External Flash The pioneers at Godox have created the revolutionary detachable fill flash, called the SU-1. This allows a Godox V1Pro round head to serve as both the bounce flash and fill flash simultaneously. Its detachable design also gives you a more compact and lightweight flash solution when required. Buttery-Smooth Graduated Lighting The V1Pro’s round head lens design enables it to produce smooth-gradated lighting with natural falloff, as opposed to the harsh lighting produced by traditional rectangular speedlites. This makes the Godox V1Pro on-camera flash perfect for events, weddings, and portraits. Compatible with the Godox 2.4GHz X-system The V1Pro TTL speedlite is fully compatible with the Godox 2.4GHz ONE System, enabling it to be triggered using either an X1 (ST-III),  X2 (ST-III+), XPro (ST-IV), XProII, or X3 flash triggers, with full TTL or manual capabilities. It can also be used in conjunction with other flashes in the Godox X Trigger System. The Godox V1Pro round head flash is compatible with Canon, Nikon, Sony, Olympus, Panasonic, and Fuji camera systems.

Sony HVL-F60RM.CE7 High-speed flash

Sony HVL-F60RM.CE7 (HVLF60RM.CE7, HVLF60RMCE7, HVL-F60RM, hvlf60rm) High-speed flash The HVL-F60RM clip-on flash unit features high GN602 power, high-speed continuous shooting support, and fast operation that are ideal for advanced to professional users. Wireless radio commander/receiver functionality is included. GN60 Power and Wide Range Lens Focal Lengths Supported The high GN6010 output of this clip-on flash unit provides plenty of power for a wide range of shooting situations. 20mm to 200mm (14mm with wide panel) lens focal lengths are supported with corresponding flash coverage. The focal length can be selected as required. Continuous Shooting Support Charge cycle time is 1.7 seconds11, or just 0.6 seconds11 with the External Battery Adaptor (FA-EBA1) (optional) for continuous shooting. Proper flash synchronisation is maintained during continuous shooting, minimising flash misfires and ruined shots. Sony Original Quick Shift Bounce Quickly shift from horizontal to vertical orientation, 90° left or right, upward by up to 150°, and downward by 8° for flexible positioning and optimum lighting when frame angles need to be changed quickly. A refined compact mechanism is ideally matched to E-mount cameras, complementing the compact convenience and portability of the E-mount system. Custom Keys and TTL Flash Memory Functions can be freely assigned to the unit’s four-way controller, centre button, and control wheel for easy access when required. What’s more, TTL flash output can be memorized and recalled when needed for immediate use or use after minor adjustment. This is another feature that can simplify manual workflow and save time. Direct Output Adjustment An independent light output level button (LEVEL -/+ button) allows direct control of output or compensation for efficient workflow. A comprehensive display facilitates adjustments and flash output level confirmation, and also provides intuitive access to flash output settings for paired wireless flashes. [1] LEVEL -/+ button [2] LCD panel. Reliability in Challenging Environments A dust and moisture resistant12 design ensures reliable operation in harsh environments. A Rain Guard (optional) provides even further protection and reliability. Another feature that contributes to reliability is a metal Multi Interface Shoe. All of these features add up to enhanced reliability in challenging situations. Stable Wireless Radio Communication Both optical remote flash triggering and wireless radio triggering are supported.  One HVL-F60RM mounted on a compatible camera13 paired with off-camera units provides reliable, interference-free radio communication in conditions that would make optical communication difficult. Slow sync, rear-curtain sync, and multi flash are supported. Multi Flash Radio Control Up to 15 flash units can be assigned to up to 5 groups14 for wireless flash control at distances of up to 30 meters. Optional Wireless Radio Commander (FA-WRC1M) and Wireless Radio Receiver (FA-WRR1) units allow the HVL-F60RM to be used with Sony flash units that do not have built-in radio wireless capability, as well as the radio-capable HVL-F45RM. P-TTL Flash Control Appropriate flash output is determined by using pre-flash to measure exposure. LED Light and AF Assist Not only for studio, but also for outdoor shooting, a built-in LED light is very useful. It also functions as an AF assist light to ensure accurate autofocus operation in dim lighting. The LED can make manual focus easier in dark situations too. Bounce Adaptor The supplied bounce adaptor can be attached for extra diffusion that will illuminate a wider area than the bare flash and also create softer shadows. Use the bounce adaptor with the wide panel to enhance the effect even further. Colour Filters The supplied colour filters can be used to match or complement existing lighting in order to achieve natural white balance or create a specific atmosphere. Sync Terminal (IN/OUT) The sync terminal can function as either an input or an output. As an input it can receive the trigger signal from a flash meter when setting up exposure, for example. As an output it can relay the flash trigger to an external monobloc flash or similar for expanded multi-flash versatility. High-Speed Sync Normal maximum flash sync speeds mean that the shutter speed must be stopped down when using daylight fill flash, making it difficult to produce background bokeh. High-speed sync allows the flash to be synchronised to the full range of shutter speeds15 so that large apertures can be used to create bokeh wherever desired. Selectable Light Distribution Three light distribution settings are available: “STD” for standard distribution, “CENTER” for GN priority, and “EVEN” for wide-angle priority. Flash Ready Beep A “ready” beep informs the user when the flash has fully recharged and is ready for the next exposure, even when using wireless flash. Remote Release The remote release function can be used to remotely activate a camera shutter in synchronisation with one or more flash units, making it possible to simultaneously shoot a single subject from multiple angles, for example. Multi/Micro USB Terminal The flash unit can be connected to a computer via its Multi/Micro USB terminal for convenient software updating.

Canon 1957C006 Speedlite 470EX-AI Flash

Canon 1957C006 (470 EX-AI, 470-EX-AI, 470_EX_AI, 470ex-ai) Speedlite 470EX-AI Flash Powerful mid-range Speedlite for professionally-lit images This powerful mid-range Speedlite offers an exciting way to take professionally-lit images quickly. Thanks to a motorised bounce and swivel head that automatically adjusts itself to ensure the correct angle, natural flattering, lighting is assured. Professional lighting made easy See how the Speedlite 470EX-AI anticipates every lighting situation A flash that reacts The motorised flash head automatically adjusts itself, ensuring the bounce angle is always correct for improved lighting where natural and professional looking flash images are required. Powerful, flexible and quick to adjust With a Guide Number of 47m the Speedlite 470EX-AI is ideal for lighting large groups and bouncing light from walls and ceilings for softer, more natural results. Light further and wider A built-in zoom head aims to match the angle of the flash’s output to the viewing angle of the lens being used, and operates across a 24-105mm zoom range (full frame equivalent). Clear, detailed display The dot-matrix display enables a display of characters for more detailed information while the LCD panel displays all the flash settings and is very easy to read. Creative lighting possibilities The Speedlite 470EX-AI can be fired off-camera using optical triggering. This allows EOS cameras featuring a built-in Integrated Speedlite Transmitter to fire the flash from up to 10m away, without the need for extra equipment.

Dedolight DLOBML2 LedZilla2 Mini On-board LED Light Head 8W

Dedolight DLOBML2 (DL-OBML2, DL/OBML2, DL_OBML2, dlobml2) LedZilla2 Mini On-board LED Light Head 8W The Dedolight Mini-DLOB 2 LED On Board Light is the second generation of this well-engineered versatile neat fixture, it takes advantage of the latest LED chip technology and has great output coupled with control and high colour fidelity for great skin tones. Single, high-power colour correct LED

Dedolight DLOBML-IR860 REDZilla Mini On-board InfraRed LED Light Head 860nm

Dedolight DLOBML-IR860 (DLOBML/IR860, DLOBML_IR860, dlobml-ir860) REDZilla Mini On-board InfraRed LED Light Head 860nmThe 860nm iRedZilla IR LED Light Head from Dedolight is an on-camera shoe-mountable infrared LED designed for shooting in low or no-light environments using a camera's night-shot function. The iRedZilla can illuminate a range of up to 130' and its beam angle can be adjusted between 4 and 56°. The LED light head is dimmable down to 5%. The light projected from the 860nm iRedZilla is invisible to the human eye.Optional battery shoes are compatible with Panasonic, Canon, and Nikon mini-DV batteries (sold separately). Alternatively, an Anton Bauer / PAG system, a car cigarette lighter output, or a battery belt can be used as a power source. The applications of the iRedZilla include night shooting, infrared photography, surveillance systems, machine vision systems, and wildlife observation.