Datavideo DATA-HC800 Water Resistant Hard Case - XXL

Datavideo (DATA-HC800, DATAHC800, DATAHC800) This Hard Case from Datavideo is a Heavy Duty case made from super strong polypropylene. It's water, dust and crush resistant to ensure you keep your gear protected.  Trunk style with retractable handle and wheels Highly crush resistant Rubber seals to protect valuable equipment from water & dust Handy pull-out handle and wheels for easy transporting Constructed from Polypropylene

Datavideo DATA-RMC185 KMU Controller - Dedicated Control Surface

Datavideo (DATA-RMC185, DATARMC185, DATA RMC185) The RMC-185 is a cost effective physical controller designed specifically for control of the KMU series 4K Multi-Camera Processor. The RMC-185 interfaces with the KMU-100 via an RS-422 interface. This dedicated controller allows operators to make smooth zoom and pan/tilt motions by using the joystick. 4 presets are available that hold scale, position, motion path and speed of all 4 individual 3Gb/s outputs, per channel. Buttons allow start/stop/reset of motion in a predefined speed of every individual output.

Datavideo DATA-SE650 4 Input HD Digital Video Switcher

Datavideo (DATA-SE650, DATASE650, DATA SE650) The Datavideo SE-650 is a small, costeffective, professional HD digital video switcher. It offers two HD-SDI and two HDMI inputs that support video formats up-to 1080i. It features two HDMI outputs and a user assignable HD-SDI output. The SE-650 is the perfect device for small scale video production using professional cameras and HDMI equipment. The SE-650 also features an audio mixer with microphone and unbalanced RCA audio inputs. Advanced tools include Chromakey, Luma key, PiP, wipe generator, still store and tally.

Datavideo DATA-HBT11 HDBaseT Receiver

Datavideo (DATA-HBT11, DATAHBT11, DATA HBT11) The HBT-10 HDBaseT transmitter and HBT-11 receiver provide a maximum transmission distance of 100 meters. The pair supports video transmission up to 4K resolutions over Ethernet. With a 48V power source connected to the HBT-11 HDBaseT receiver, the HBT-11 can also remotely power the transmitter using Power over Ethernet (PoE). The HBT-10 transmitter can power external devices from the 12V/30W DC output. DVIP control can be achieved over the same Ethernet cable. In other words, HDMI video, DVIP control signals and Power over Ethernet (PoE) can be transmitted between the transmitter and the receiver using a single Ethernet cable.

Datavideo DATA-CB62 CB-62

Datavideo DATA-CB62 (DATACB62, DATA/CB62, data-cb62) CB-62HDMI Active Optical Cable - 100MCB-62 is an HDMI Active Optical Cable (AOC) with high performance, low power consumption and low cost.Using Optical Fiber to replace traditional copper wire enables longer cable runs to transmit 4K@60Hz UltraHD image up to 100 meters.Compared with the traditional copper wire, the cable is much longer, slimmer with better signal quality and also EMI/EMC compliant.The cable does not require an external power supply.

Datavideo DATA-CB61 CB-61

Datavideo DATA-CB61 (DATACB61, DATA/CB61, data-cb61) CB-61HDMI Active Optical Cable - 50MCB-61 is an HDMI Active Optical Cable (AOC) with high performance, low power consumption and low cost.Using Optical Fiber to replace traditional copper wire enables longer cable runs to transmit 4K@60Hz UltraHD image up to 100 meters.Compared with the traditional copper wire, the cable is much longer, slimmer with better signal quality and also EMI/EMC compliant.The cable does not require an external power supply.

Datavideo DATA-CB60 CB-60

Datavideo DATA-CB60 (DATACB60, DATA/CB60, data-cb60) CB-60HDMI Active Optical Cable - 30MCB-60 is an HDMI Active Optical Cable (AOC) with high performance, low power consumption and low cost.Using Optical Fiber to replace traditional copper wire enables longer cable runs to transmit 4K@60Hz UltraHD image up to 100 meters.Compared with the traditional copper wire, the cable is much longer, slimmer with better signal quality and also EMI/EMC compliant.The cable does not require an external power supply.

Datavideo DATA-WR500 WR-500 Bluetooth Teleprompter Remote Control

Datavideo DATA-WR500 (DATAWR500, DATA WR500, DATA/WR500, data-wr500) WR-500 Bluetooth Teleprompter Remote Control Bluetooth Teleprompter Remote Control Script controller: play/pause, speed Up/show down text scroll, next/previous break marker To be used with TP-100 / TP-300 / TP-500 / TP-600 prompter rigs Compatible with Android / iOS devices Wired or wireless connection Features Bluetooth 4 – for longer battery life & enhanced range Automatic pairing (via the DV Prompter app) Tablet / Phone Compatibility Bluetooth 4 required   * check the tablet/phone manufacturers specifications

Datavideo DATA-KMU100 KMU-100 UltraHD to HD Multiviewer Converter

Datavideo DATA-KMU100 (DATAKMU100, DATA KMU100, DATA/KMU100, data-kmu100) KMU-100 UltraHD to HD Multiviewer Converter   Shortlisted for the IABM's 2016 Game Changer Award, and winner of 3 independent awards at NAB 2016, the KMU-100 is a unique 4K multi-camera production solution that delivers multiple virtual full HD (up to 1080p) scaled camera angles with minimal installation cost and simple operation. The basic concept is straightforward: the output of a single 4K/UHD camera is connected to KMU-100, which then displays up to four 16x9 user-defined cropped windows that are sent out as four separate HD signals through HD-SDI. These user defined windows can be scaled to zoom in on a particular subject that you would like to highlight on the 4K signal. An additional 4K camera can be connected to allow up to eight defined outputs from the two 4K signals. In essence, with KMU-100 a single 4K camera can be used to deliver a true 4-camera HD production, without the need to install, manage, operate and balance multiple cameras. KMU-100 is quick to set up and exceptionally easy to use.  As an option, the Datavideo RMC-180 camera controller can be added to easily pan, tilt, and zoom to create the user defined windows on the 4K signal. You can set up shots in advance and save them as presets, or you can do it in real-time.

Datavideo DATA-RMC260 RMC-260 SE-1200MU Digital Video Switcher remote controller

Datavideo DATA-RMC260 (DATARMC260, DATA RMC260, DATA/RMC260, data-rmc260) RMC-260 SE-1200MU Digital Video Switcher remote controller   The RMC-260 is a cost effective remote controller designed specifically for the SE-1200MU Digital Video Switcher.  The RMC-260 interfaces with the SE-1200MU via an RS-232 interface.   The RMC-260 is a switcher-style controller, an alternative to the PC Controller software of SE-1200MU, all keys on the unit are clearly defined for quick and easy operation. Features: SE-1200MU Digital Video Switcher remote controller A switcher style keyboard for SE-1200MU operation Clear key definitions Support Keyers enable and function assignment quickly Save user behavior to user memory keys and load them quickly Two keyers with two corresponding knobs for assignment of Keyer 1/2 sources XPT (Cross Point Assignment) Take button to switch between PVW and PGM views FTB button fades the PGM view to a black screen Cross Dissolve button applies cross-dissolve transition effect to switching between PGM and PVW views Still Grab function captures the instantaneous video image RS-232 interface for communication between RMC-220 and SE-1200MU   Bright LED lighting Includes: RMC-260 - SE-1200MU Digital Video Switcher remote controller RS-232 Transmission Cable   Power Adapter

Datavideo DATA-DAC90 DAC-90 SDI Audio De-embedded Box

Datavideo DATA-DAC90 (DATADAC90, DATA DAC90, DATA/DAC90, data-dac90) DAC-90 SDI Audio De-embedded Box The DAC-90 is an audio de-embedder box with useful function that allows users to de-embed 16 analogue audio signals (4 at a time) from SDI video signal. It features 3G/HD/SD-SDI to support up to 1080p/60 video format, automatically detecting and switching between the different formats and provides 4 mini XLR audio connectors for outputting analogue audio to audio devices such as monitors, recorders, switchers, and audio mixers.   The Audio box also has SMPTE and EBU switchable settings and the De-embedded audio signal can be assigned by using the built-in DIP switches. Features: Audio De-Embedder De-Embed Audio from SDI Signal Automatically detects 3G, HD, SD signal 4 x Analogue Mini XLR Audio outputs Assignable De-embedded audio signal Audio level indicator display SMPTE and EBU Audio level switchable   Control via DIP Switches

Datavideo DATA-DAC91 Audio Embedder

Datavideo DATA-DAC91 (DATADAC91, DATA DAC91, DATA/DAC91, data-dac91) Audio Embedder The DAC-91 is an embedded audio box with useful functions that allow users to embed 2 channels of analogue audio into SDI video signal. It features 3G/HD/SD-SDI to support up to 1080p/60 video format, automatically detecting and switching between the different formats and provides mini XLR and RCA audio connectors for inputting analogue audio.   The Audio box also has audio level adjustment by using the built-in DIP switches. Features: Audio Embedder Embed Audio into an SDI Signal Automatically detects 3G, HD, SD signal 4 x Analogue Audio inputs (Mini XLR x 2, RCA x 2) Audio level indicator display Audio level adjustment   Control via DIP Switches

Datavideo DATA-CG250 Notebook Character Generator

Datavideo DATA-CG250 (DATACG250, DATA CG250, DATA/CG250, data-cg250) Notebook Character Generator Using a standard laptop, it enables users to create and deliver attractive on-screen graphics and titles in real-time. It is easy to operate, designed to be intuitive and responsive under the pressure of a live event. CG-200 and TC-200 works with standard Windows laptops with an HDMI interface and supports vision mixers with and without a DSK. Until now, real-time PC titling software has required an additional SDI adapter card to be fitted into a desktop PC. For live programming on location, a computer-based character generator can be problematic, in terms of the physical bulk of the PC, the need for an additional screen and the power requirement. CG-200 and TC-200 makes professional CG on the run a reality. DSK mode - As software only, CG-200 and TC-200 can work with a vision mixer equipped with a DSK. In this mode, CG-200 and TC-200 can be set up as the key source or fill source. It can work with any vision mixer (such as the Datavideo SE-2800 and SE-3000) that has a downstream keyer (DSK). Overlay mode -  The Title Overlay mode overcomes the lack of a DSK in the vision mixer. Using the small external TC-200 hardware unit, The HDMI output from the laptop is embedded with the SDI output from a camcorder, VTR or vision mixer.

Datavideo DATA-VP737 Composite Signal Repeater

Datavideo DATA-VP737 (DATAVP737, DATA VP737, DATA/VP737, data-vp737) Composite Signal Repeater VP-737 is a composite video signal repeater which consists of a transmission and receiver unit.   VP-737 is able to extend composite video source signal up to 200 meters away over Cat5e (or better) cable. With no software configuration required, the installation and setup is quick and hassle-free. Features: Wired composite video transmission as far as 200 meters Completely adaptive - quick, easy installation and setup, no configuration required   Cat5e extension design makes use of existing Cat 5e or better wiring infrastructures

Datavideo DATA-SE1200MU 6 Input Rackmount HD Mixer

Datavideo DATA-SE1200MU (DATASE1200MU, DATA SE1200MU, DATA/SE1200MU, data-se1200mu) 6 Input Rackmount HD Mixer Whether you are filming a seminar or conference, conducting a live outside broadcast or shooting inside a production studio, the Datavideo SE-1200MU HD video switcher enables you to switch seamlessly between video sources and blend high-quality digital content on the fly.   SE-1200MU a small, portable computer controlled 1RU rack mountable switcher. It features a 6-Channel HD video input that is incredibly reliable, unlike PC-based systems that are prone to crashing mid production.   SE-1200MU streams out multi-view screen video in real-time to a control PC for monitoring and control remotely. It is designed to be fully controlled from any Windows Laptop / PC and Android tablet / iPad / Mac with the included SE-1200 software control panel.   SE-1200MU includes four SDI and two HDMI inputs with embedded audio and an internal frame synchronizer so you can use sources without gen-lock such as consumer HDMI cameras or even computers for live PowerPoint™ presentations.   Two assignable SDI and two HDMI outputs for connecting an HD recorder, monitor and a streaming encoder, plus two Balanced XLR audio inputs for connecting an external audio mixers. Other features include chromakey, lumakey, DSK, PIP, still stores, audio delay, tally and RJ-45/RS-232 remote control interface.

Datavideo DATA-MC2 MC-2 Spare Gooseneck XLR Microphone for ITC-100

Datavideo DATA-MC2 (DATAMC2, DATA MC2, DATA/MC2, data-mc2) MC-2 Spare Gooseneck XLR Microphone for ITC-100 Gooseneck XLR Microphone for ITC-100 intercom system

Datavideo DATA-AD200 6-Channel Audio Delay/Mixer

DATAVIDEO DATA-AD200 (DATAAD200, DATA AD200, DATA/AD200, data-ad200) 6-Channel Audio Delay/Mixer with Level Adjustment   Datavideo AD–200 is an integration of 6-Channel audio delay with a matrix mapping function of 4-Channel outputs Audio Mixer, a combination design with front panel and main unit, 2 separate parts by 1RU rack mount design which can be easily installed to OB Van or customized rack. Features: 4-CH balanced audio inputs, 2-CH AUX inputs selectable of Mic/Line level 4-CH balanced audio outputs, 2-CH unbalanced-audio outputs Support up to 3sec audio delay adjustment for each input channel Audio level adjustment of each input 6-CH Audio mixer and matrix router to 4-CH audio outputs

Datavideo DATA-VP597 2*6 3G-SDI HD/SD SDI Distribution Amplifier

DATAVIDEO DATA-VP597 (DATAVP597, DATA VP 597) VP-597 2*6 3G-SDI HD/SD SDI Distribution Amplifier  Datavideo VP-597 is a six output SDI distribution amplifier with A/B inputs switching control (non-locked). It supports 3G/HD/SD SDI video with embedded Audio and re-clock design for long distance transmission. Two source inputs can be controlled by an A/B panel switch or thru GPI remote control interface. VP-597 is ideal for simple A/B source switching to multiple HD displays or it can be used as a backup 3G/HD/SD SDI input sources switcher for live events. Incredible power in a tiny unit: great for simple A/B source switching to multiple HD displays. Also, you'll never be short of SDI outputs again, giving you massive flexibility, plus you can instantly incorporate secondary backup equipment into your live workflow. Features: 2 x 3G/HD/SD-SDI inputs 6 x 3G/HD/SD-SDI distribution outputs with re-clock Supports embedded Audio SDI Two input video sources can be controlled by A/B switch or GPI remote (non-locked) DC-12V Supported video formats: 3G-SDI 1080P 50/59.94/60 HD-SDI 1080P 23.98/24/25/30 1080i 50/59.4/60 720P 50/59.94/60 SD-SDI 525i /625i  

Datavideo DATA-DAC70 Up / Down / Cross Converter with VGA

DATAVIDEO DATA-DAC70 (DATADAC70, DATA DAC 70) DAC-70 Up / Down / Cross Converter with VGA The DAC-70 SD/HD/3G-SDI Up/Down/Cross Converter from Datavideo converts between SD, HD, and 3G formats. It supports 10-bit video processing and accepts VGA, HDMI, and SD/HD-3G-SDI video input signals and automatically converts them to the selected output format. The DAC-70 supports resolutions up to 1080p60 and up to 8 channels of embedded SDI or HDMI audio. An analog L/R audio input is also provided. Thanks to a built-in mini-USB port, the converter is firmware upgradeable for support of future video formats. A 12V / 1A power supply and cord comes included. Low SDI jitter with long cable lengths Compatible with optional RMK-2, for holding multiple converters and distribution amplifiers in a 2RU space Compatible with the MB-4 battery adapter Compatible with MB-5 strap adapter    

Datavideo DATA-CB31 50M All in One Video Cable Set

DATAVIDEO DATA-CB31 (DATACB31 DATA CB31 DATA/CB31) 50M All in One Video Cable Set   Connections for:   50M All in One Video Cable Set 1 x HD/SD SDI cable 1 x CV cable for return video 1 x RJ45 connector for use with MCU-100 5-pin XLR for Talkback and Tally  

Datavideo DATA-CB30 30M All in One Video Cable Set

DATAVIDEO DATA-CB30 (DATACB30 DATA CB30 DATA/CB30) 30M All in One Video Cable Set   Connections for: 30M All in One Video Cable Set 1 x HD/SD SDI 1 x CV for return video 1 x RJ45 Connectors for use with MCU-200 5-pin XLRfor Talkback and Tally  

Datavideo DATA-CB23H 50M All in One Cable for Mobile Studios

DATAVIDEO DATA-CB23H (DATACB23H DATA CB23H DATA/CB23H) 50M All in One Cable for Mobile Studios 50M All In One for Mobile Studio / Mixer - Switchers 1 x 4-pin XLR power cable 1 x 5-pin XLR transmission cable for intercom 1 x 1.5C-2V 75Ω for video 1 x 1.5C-2V 75Ω for return video Connections for: Intercom & Tally Phantom Power Video (including HD-SDI) Return video for Look Back monitor    

Datavideo DATA-CB22H 30M All in One Cable for Mobile Studios

DATAVIDEO DATA-CB22H (DATACB22H DATA CB22H DATA/CB22H) 30M All in One Cable for Mobile Studios   30M All In One for Mobile Studio / Mixer - Switchers 1 x 4-pin XLR power cable 1 x 5-pin XLR transmission cable for intercom 1 x 1.5C-2V 75Ω for video 1 x 1.5C-2V 75Ω for return video Connections for: Intercom & Tally Phantom Power Video (including HD-SDI) Return video for Look Back monitor  

Datavideo DATA-CB47 All-in-One Cable BNC and 5-pin XLR Intercom 50M

DATAVIDEO DATA-CB47 (DATACB47 DATA CB47 DATA/CB47) All-in-One Cable (BNC and 5-pin XLR Intercom) - 50M Features:  50M All in One Video Cable Set 1 x BNC (HD-SDI compatible) 5-pin XLRfor Talkback and Tally  

Datavideo DATA-VP634 HD/SD SDI Repeater

DATAVIDEO DATA-VP634 (DATAVP634 DATA/VP634 DATA VP 634) VP-634 HD/SD SDI Repeater (for use with VP-633) 100m SDI Repeater (Unpowered)Features:     Extend the capabilities of SDI cable     1 x VP-633 with 3x VP-634 SDI repeaters can each extend the range by a further 200m (high quality SDI cable)     SDI Repeaters can be used in a chain, allowing runs of up to 1000m with good quality SDI cable.     Requires 1 x VP-633 in chain to supply power     Up to 3 VP-634 can be used with 1 x VP-633     3G, HD & SD-SDI Support    

Datavideo DATA-VP633 Powered HD/SD SDI Repeater

DATAVIDEO DATA-VP633 (DATAVP633 DATA VP 633 DATA/VP633) VP-633 Powered HD/SD SDI Repeater 100m SDI Repeater (Powered) Features: Extend the capabilities of SDI cables Upto 4 SDI Repeaters (1 x VP-633 plus 3 x VP-634) can be used in one chain, allowing runs of up to 1000m with good quality SDI cable VP-633 can repeat SDI signal upto a further 200m (SDI Cable dependant, 3G 100m max between repeaters) Add up to 3 x unpowered VP-634 for each additional 200m required (SDI Cable dependant) 12v DC PSU Supplied 3G, HD & SD-SDI Support

Datavideo DATA-PD4A Redundant Power Distribution System

DATAVIDEO DATA-PD4A (DATAPD4A DATA PD 4 A DATA/PD4A) PD-4A 1U Redundant Power Distribution  System for Mobile Video Studio Redundant Power Center This unit has two AC inputs as well as a DC input, and can offer 4 12V 5Amp + 2 12V 10Amp DC outputs via XLR. The unit also features a built-in time delay power on control to initiate each DC output terminal in sequence, and installed with an auto-recover  fuse in each input and output to protect everything connected. Features:   Ideal for any installed or Mobile Studio Input Connections - AC: 100-240V AC Max 6.3A, 50Hz or 60Hz (2x AC Input w/ Power Switch) - DC: 12V 300W   Output Connections - x3 12v 5A XLR DC Female - x2 12v 10A XLR DC Female   Redundant PowerWith two AC power supplies, the PD-4 will still supply energy to your devices, even if one power source fails. Built-in time delay power-on control to initiate each DC output termal in sequence   19" 1U rack size

Datavideo DATA-PD2A High Power 1U Power Distribution System

DATAVIDEO DATA-PD2A (DATAPD2A DATA PD 2 A DATA-PD-2-A) PD-2A High Power 1U Power Distribution  System for Mobile Video Studio Power Center Features: 400 watt rated power supply  (compared with PD-1's 300w) Input connections: AC: 100-240V AC Max 6.3 A, 50Hz or 60HZ. DC: 12V 400W Output connections: 4 x 12V DC 3A XLR, 2 x 12V DC 5A XLR & 2 x 12V DC 10A XLR Combine up-to 10 mains power supplies into a single convenient power connection

Datavideo DATA-TP500BB DSLR Tablet Teleprompter

DATAVIDEO DATA-TP500BB (DATATP500BB DATA/TP/500/BB DATA TP 500 BB) TP-500 DSLR Tablet Teleprompter Professional teleprompting made easy Hardware built to withstand the demanding conditions of professional shoots and software with high end features, our teleprompters are designed to be simple and straight forward to operate by the talent or remote operator. We use a high-quality mirror glass with a low iron content, meaning that the mirror has no tint. Suitable for tablets up to 11.6''  The TP-500 is designed to convert a small tablet computer into a low cost and effective prompter. The teleprompter houses any tablet with a minimum width of 110mm and maximum of 210mm measured in portrait orientation. A regular 10" iPad or Android alternative works best. Optional Bluetooth and wired remote control The WR-500 can be used to control Datavideo's powerful dvPrompter Plus app in Wired or Bluetooth modes. The controller allows you to pause and resume the scroll, increase and decrease speed, increase and decrease font size, jump to specific points within the script (break markers) and switch between scripts in the playlist.

Datavideo DATA-RMK2 Rackmount System for up to 8 x DAC Converters

DATAVIDEO DATA-RMK2 (DATARMK2 DATA RMK 2 DATA/RMK/2) RMK-2 Rackmount System for up to 8 x DAC Converters 2U Rackmount Kit • Mounts up to 8 x Datavideo  DAC Converters in a single 2U Rackframe• Single Power Connection• Suitable for DAC-8P, DAC-9P, DAC-60 and future DAC models Mini converters deliver a lot of power but are not designed for rack use. This clever product doesn't just provide a rack framework but also distributes an electrical supply to each DAC unit. The result is a centralized and fully flexible converter system, with greatly simplified wiring.

Datavideo DATA-DAC60 Hd/Sd-Sdi to Vga Converter

DATAVIDEO DATA-DAC60 (DATADAC60 DATA/DAC60 DATA DAC 60) DAC-60 HD/SD-SDI to VGA Converter The Datavideo DAC-60 SD/HD/3G-SDI to VGA Scaler and Converter converts SD/HD/3G-SDI video signals into VGA signals for display on computer peripherals such as projectors and monitors. The DAC-60 features a loop-through input that passes the SDI input signal downstream without changing it. This allows you to feed the same video signals to both VGA and SDI based equipment. The unit auto detects the input format and scales it to the user selected VGA output format, which is indicated by the six LEDs. With the included software you can set the built-in processing amp (proc amp) to adjust Contrast, Hue and Saturation of the VGA signal. The SDI loop-through signal is unaffected by the proc amp settings. The unit is designed to be portable as it draws only 500 mA at 12 volts and weighs less than a pound. Format The DAC-60 is compatible with NTSC/PAL SD signals, as well as HD-SDI and 3G SDI signals. The unit will automatically detect scale and convert the input video signals into VGA compatible signals for display on VGA-based equipment. Image Adjustment The DAC-60 has a built in proc amp for image adjustment which are controllable via the included Windows software. Once image adjustments to the VGA output are complete, you can disconnect the DAC-60 from the computer and the unit will retain the image adjustment settings. Only the VGA output is affected and the SDI loop-through signal is unaffected by the proc amp. Output The mode selection button allows you to manually select from 8 different VGA resolution presets that the DAC-60 can output. Six LEDs provide immediate and positive indication of which VGA output format you have selected. The loop-through SDI signal remains unaffected by the VGA output settings and is available to feed a switcher or other SDI based equipment.

Datavideo DATA-ITC100 8 Channel Intercom System

DATAVIDEO DATA-ITC100 (DATAITC100 DATA ITC 100 DATA/ITC/100) ITC-100 8 Channel Intercom System Intercom System IN THE BOX: ITC-100 main unit 4 x ITC-100SL Slave Unit 4 x ITC-100SL Carrying Case 4 x 20m XLR to XLR Intercom Cable 4 x MC-1 Headset / Microphone MC-2 XLR Gooseneck Mic LP-1 XLR Gooseneck Light 12V 2.5A Power Supply Unit AC Power cord Instruction Manual Features:   Industry Standard 19" 1U rack design, for easy integration Supports 8-Way Intercom Additional external earphone and microphone interface Bi-colour tally light indicator * Selectable channel talk, broadcast to all or mute. Half-Duplex design for ITC-100SL to eliminate the environmental noise Enables communication between the camera crew Communication distance up to 200 meters Supplied complete with Gooseneck Microphone and Light In the production studio, good communication between the director, cameraman, lighting and control room is essential to produce a polished end result. The Datavideo ITC-100 Intercom System provides 8-Way talkback and tally indicators. The director can select to talk to an individual channel or to all channels simultaneously. The ITC-100 is a standard 19" 1U rack design, so it is easy to integrate into any rack system for using in the field or studio. ITC-100 includes 4 ITC-100SL Belt Packs. * When ITC-100 used with SE-800, RMC-140 or RMC-90 required to enable Tally Light feature ITC-100SL (Belt Pack) Pack Contents TD-2 - Camera Tally Light CB-3 - 20M Cable MC-1 - Headset / Microphone Slave unit for ITC-100 / ITC-100/6

Datavideo DATA-ITC100SL Additional Belt Pack for ITC-100

DATAVIDEO DATA-ITC100SL (DATAITC100SL DATA/ITC100SL DATA ITC 100 SL) Additional Belt Pack for ITC-100 (inc 20m cable, 1x Tally Light & Headset/Mic) In the production studio, good communication between the director, cameraman, lighting and control room is essential to produce a polished end result.   The Datavideo ITC-100 Intercom System provides 8-Way talkback and tally indicators. The director can select to talk to an individual channel or to all channels simultaneously.   The ITC-100 is a standard 19" 1U rack design, so it is easy to integrate into any rack system for using in the field or studio. ITC-100 includes 4 ITC-100SL Belt Packs.   * When ITC-100 used with SE-800, RMC-140 or RMC-90 required to enable Tally Light feature    ITC-100SLITC-100SL (Belt Pack) Pack Contents:     TD-1 - Camera Tally Light     CB-3 - 20M Cable     MC-1 - Headset / Microphone     Slave unit for ITC-100 / ITC-100/6  FEATURES:     Industry Standard 19" 1U rack design, for easy integration     Supports 8-Way Intercom     Additional external earphone and microphone interface     Bi-colour tally light indicator *     Selectable channel talk, broadcast to all or mute.     Half-Duplex design for ITC-100SL to eliminate the environmental noise     Enables communication between the camera crew     Communication distance up to 200 meters     Supplied complete with Gooseneck Microphone and Light