Tilta Full Camera Cage For Sony FX9,Used

Tilta Full Camera Cage For Sony FX9,Used Excellent condition 3 months warranty  The Tilta camera cage for the Sony PXW-FX9 provides protective armor to minimize wear and supports various accessories. The multi-functional top plate is designed to fit the original and new top handles, while the LWS baseplate is compatible with Tilta Dovetails, VCT, and supports rod-based accessories via 15mm rods. The cage also features an integrated shoulder pad and dual rosettes for extender arms, making it handheld ready. In addition, the Tilta battery plate, available in gold mount or V-mount, can be attached to the back of the top plate and provides increased power for both the FX9 and accessories. The baseplate is also equipped with a Sony VCT-U14 compatible baseplate, ergonomic shoulder pad, and Arri Standard Rosette connections for easy handheld operation. With a built-in lens adapter support bracket and multiple mounting points, the cage offers both protection and versatility for your camera system.      

TILTA ES-T18-BTP-V Battery Plate for Sony PXW-FX9 - V-Mount, Used

TILTA ES-T18-BTP-V Battery Plate for Sony PXW-FX9 - V-Mount, Used 3 Months Warranty, Good Condition The Tilta Battery Plate for Sony PXW-FX9 Cage attaches directly to the back of the top plate on the Tilta FX9 Camera Cage and hugs the back side of the camera. The battery plate provides several different power outputs to allow you to power accessories and adjusts to various distances from the camera body.

TILTA HDA-SRK Speed Rail Car Mounting Kit

TILTA HDA-SRK (HDA/SRK, HDA_SRK, HDASRK, HDA SRK) Speed Rail Car Mounting Kit Arm your vehicle with the Speed Rail Car Mounting Kit designed for the Hydra Predator and other car mounted shock absorbing arms! This kit allows you to build custom speed rail rigs to support various shock absorbing arms in multiple configurations. The kit is built around 6 pieces of speed rail, of two different sizes, that can be used on their own or interconnected to create longer pieces for specific rigging needs. The 4 adjustable mounting clamps allow you to connect the speed rail in almost any configuration. The kit includes 4 high capacity suction cups, each individually rated for 50 kg or around 110lbs. These suction cups connect to the speed rail via adjustable clamps, allowing them to be placed in almost any position in order to accommodate most vehicles easily. Utilizing 4 suction cups allows you to build an incredibly stabile foundation in which to mount shock absorbing arms or other equipment. The included Front Tow Hook Adapter allows you to connect the system to any vehicle that already has that mounting point. which helps create a secure connection that relies on more than just suction.

TILTA GSS-T03 Float Dual Handle Support System

TILTA GSS-T03 (GSS/T03, GSS_T03, GSST03, GSS T03) Float Dual Handle Support System This variation of the original Tilta Float Kit is specifically designed to support the Dual Handle Power Supply Bracket for RS2 while providing increased stability and comfort while operating. This kit includes the Support Vest, Stabilizing Arm and Carrying Case from the original kit, and newly features the Dual Handle Power Supply Bracket, RS2 Remote Control Handle, and Manfrotto Adapter. This Adapter allows you to mount your Dual Handle system directly to the Tilta Float Stabilizing Arm which offers a more controlled and comfortable gimbal shooting experience.  This Adapter was developed in collaboration with our DJI Ecosystem User Group’s modification expert, Vaho Mat, who has been helping users of our fast growing community expand the functionality of their RS2 rigs. The Dual Handle Power Supply Bracket lets you power your RS2 via a Gold or V-Mount battery while providing additional stability and features multiple mounting points for attaching accessories. The Power Supply Bracket allows you to mount the RS2’s Battery Handle for additional battery life on the left side of the bracket, while the threads and NATO adapter on the right side allow for mounting the included Remote Control Handle. This handle allows you to control the Pan and Tilt of your RS2 as well as additional settings such as the run stop and photo functions of your camera. The handle’s Focus Wheel allows you to wirelessly control either a DJI or Nucleus Series Lens Control Motor. The Float’s spring-loaded stabilizing arm and support vest are designed to redistribute the weight closer to your body, allowing you to operate the rig longer than traditional gimbal setups. The new Manfrotto Adapter uses a standard sized Manfrotto plate, which allows you to quickly switch between compatible Manfrotto tripod heads and the Tilta Float Arm. This adapter can also be used directly with camera bodies when not using the Dual Handle Bracket as it can provide additional comfort while operating and increased stability while producing an organic handheld look.

TILTA GSS-T01-V Float Handheld Gimbal Support System

TILTA GSS-T01-V (GSS/T01-V, GSS/T01/V, GSST01V, GSS T01 V) Float Handheld Gimbal Support System The Tilta Float System works in conjunction with the DJI RS 2 and RS3 Pro to provide a small, compact camera stabilizer system to allow you to accomplish smooth cinematic camera movements with smaller camera setups. The counterweight-based post provides further stabilization for your setup beyond what the gimbal is already doing to allow for the smoothest possible free flowing camera movement imaginable. The spring-loaded arm and support vest design puts the weight of the rig onto your torso, allowing for longer operating times before the user gets fatigued. The included Wireless Thumb Controller allows you to wirelessly control the Ronin as well as a Nucleus M or Nucleus Nano follow focus motor. This unit is designed to be mounted to the yoke of your Tilta Float via the system’s Monitor Bracket. The Controller powers via Go Pro 5-8 Batteries and features a USB-C port that can be used for future firmware updates. Please note we do not recommend powering the unit via this port. The included Lower Back Support and Single Shoulder Strap provides additional weight distribution ensuring comfortable operation over any duration. Multiple power options provide more flexibly when powering the Ronin. The system can power the gimbal via Gold Mount, V-Mount, TB50, or the Battery Handle itself via optional accessories. *The Float is compatible with any gimbal under the weight limit that can mount via 1/4″-20 threads and can power via 2 Pin Lemo or an internal battery, however, it can only wirelessly control the RS2 and RS3 Pro* **The Float does not have power outputs other than the 2 Pin Lemo designed for powering the RS2** ***The Internal Post Cable can handle 14.8V and 3A with maximum ability to handle 6A***  

TILTA GSS-T02 Float Handheld Support System

TILTA GSS-T02 (GSS/T02, GSS_T02, GSST02, GSS T02) Float Handheld Support System This variation of the original Tilta Float Kit is specifically designed for supporting cameras in handheld configurations without an RS2 Gimbal. This kit includes the Support Vest, Stabilizing Arm and Carrying Case from the original kit, and features the new Manfrotto Adapter specifically for handheld rigging. This Adapter allows you to mount your camera system directly to the Tilta Float Stabilizing Arm which offers a more controlled and comfortable handheld shooting experience. This adapter uses a standard sized Manfrotto plate, which allows you to quickly switch between compatible Manfrotto tripod heads and the Tilta Float Arm. This Adapter was developed in collaboration with our DJI Ecosystem User Group’s modification expert, Vaho Mat, who has been helping users of our fast growing community expand the functionality of their RS2 rigs. This kit is the perfect option for supporting the DJI Ronin 4D, allowing you to better stabilize and comfortably operate the camera longer, all while taking full advantage of the 4D’s built in stabilization. This adapter can also be used for other camera systems as it offers support for more comfortable handheld shooting over longer periods of time. The spring-loaded stabilizing arm and support vest are designed to redistribute the weight closer to your body, allowing you to operate the rig longer than traditional handheld setups. The Lower Back Support provides additional weight distribution ensuring comfortable operation over any duration. This new handheld focused Tilta Float Kit will allow you to take full advantage of the Float Arm for additional comfort while operating and increased stability while producing an organic handheld look.

TILTA ESR-T15-V Camera Cage for Sony Venice 2 - V Mount

TILTA ESR-T15-V (ESR/T15-V, ESR/T15/V, ESRT15V, ESR T15 V) Camera Cage for Sony Venice 2 - V Mount Expand the functionality of your Sony Venice Camera Body with our new Camera Cage for Sony Venice 2! The frame of this cage is constructed from a high quality, CNC-milled aluminum alloy that offers additional protection and mounting options for accessories. The cage itself supports accessories via Cold Shoe, NATO Rail, 1/4″-20 threads and 3/8″-16 threads with locating pins. The updated Battery Plate for Sony Venice 2 comes in both Gold Mount or V-mount and integrates with the Top Plate via an external cable, which provides reliable power and communication to the cage’s various ports. This cable also accommodates and is fully compatible with the larger size of the external recording module that can be attached to the rear of the camera. This greatly expands your options for powering accessories and wirelessly triggering the camera. The Top Plate utilizes a built-in communication cable similar to our previous Venice System and provides Run Stop functionality to all of the cage’s 3-Pin Fischer R/S ports. The Venice’s EVF can also be mounted to the Top Plate via 15mm LWS rods that can be secured near the front of the plate. The Top Handle features an adjustable design that allows it to easily slide on and off of the Top Plate which is compatible with the Venice’s Original Top Handle as well. This is a convenient solution for quickly adjusting the balance of the camera after a lens change or when adapting the camera for Steadicam/Gimbal setups. An optional Top Handle Extension can be mounted to expand the handle so that it wraps around the Battery Plate. This offers some additional mounting options as well as a unique way to operate the camera especially at lower angles. The Baseplate includes a built-in shoulder pad and is natively compatible with Tilta-Standard Dovetails. An optional Tilta Standard to Arri Standard Multi-Functional Baseplate can be utilized to adapt this cage to mount onto an Arri Standard Dovetail if needed. Compatible with both the Sony Venice and Sony Venice 2!

TILTA ESR-T13-RES-V Camera Cage and Backpack System for Sony Venice Rialto - V Mount

TILTA ESR-T13-RES-V (ESR/T13-RES-V, ESR/T13/RES/V, ESRT13RESV, ESR T13 RES V) Camera Cage and Backpack System for Sony Venice Rialto - V Mount Arm your camera with this Tilta camera cage specifically designed for the Sony Venice Rialto. It provides a high quality aluminum, CNC-milled protective armor for the sensor block of the camera that has several ¼”-20 and ⅜”-16 mounting points for attaching accessories. A battery plate, available in either gold mount or V-mount, can be mounted to the back of the sensor block. This then sends power to a 3-pin Fischer and 2-pin Lemo port on the front of the cage to allow you to power accessories. The included 3-pin Fischer cable sends communication from the camera’s 3-pin communication port to a 3-pin Fischer port on the back of the cage which then sends R/S functionality to a 3-pin R/S port on the front of the cage. Note: this R/S port can only send run stop and cannot provide power to any accessories. Two extension arms and wooden handles are included in the kit to allow you to attach to the cage’s two Arri standard rosettes that are on the sides, giving you a comfortable way to operate. The kit also includes a backpack that incorporates a dovetail and small baseplate to mount the camera body onto so that you have a comfortable, ergonomic way to operate and transport your whole Rialto camera setup.  

TILTA ESR-T13-RB-V Sony Venice Rialto Backpack

TILTA ESR-T13-RB-V (ESR/T13-RB-V, ESR/T13/RB/V, ESR T13 RB V, ESRT13RBV) Sony Venice Rialto Backpack The Sony Venice Rialto Backpack incorporates a dovetail and small baseplate to mount the Rialto camera body onto. When coupled with the sensor block’s cage, it provides you with a comfortable, ergonomic way to operate and transport your whole Rialto camera setup. The backpack also has a battery plate.

TT-C06-D-07 19mm Studio Tilta-Standard to ARRI-Standard Base Plate

TILTA TT-C06-D-07 (TT/C06-D-07, TT/C06/D/07, TTC06D07, TT C06 D 07) 19mm Studio Tilta-Standard to ARRI-Standard Base Plate This 19mm studio baseplate is designed to adapt a Tilta standard baseplate to an Arri standard baseplate to allow you to use your camera rig on an Arri standard-sized dovetail. The top section of the baseplate that allows for this function can also be removed and replaced with a flat top, which allows it to double as a regular Arri standard-sized baseplate. It uses a hard-anodized surface design and is CNC-milled from a lightweight and durable high-impact aluminum 7075 alloy.

TILTA UH-T04-15S Universal Pro Hand Grip System for 15mm LWS and 15mm Studio Rod System

TILTA UH-T04-15S (UH/T04-15S, UH/T04/15S, UHT0415S, UH T04 15S) Universal Pro Hand Grip System for 15mm LWS and 15mm Studio Rod System This high strength universal hand grip system clamps directly onto the rods of your camera setup, allowing for super fast transitions from shoulder mounted operation to other camera mounts and back again. Simply snap the bridge onto the rods and lock it down via a tightening screw. This system comes in two different designs: one that offers mounting points to 15mm LWS and 15mm studio rod systems and another that offers mounting points to 15mm LWS and 19mm studio rod systems. This snap-on design ensures that you will not have to remove accessories that are already attached to the rods. The rig is extremely stable, solid, and durable. The hand grips have high density foam for comfort, support, and stability which can also be rotated 360 degrees via stainless steel Arri Standard Rosettes. Furthermore, the three-joints design allows for operator flexibility and comfort. The Rosette Extension Handles can be extended to fit your needs.

TILTA UH-T04 Universal Pro Hand Grip System

TILTA UH-T04 (UH/T04, UH_T04, UHT04, UH T04) Universal Pro Hand Grip System This high strength universal hand grip system clamps directly onto the rods of your camera setup, allowing for super fast transitions from shoulder mounted operation to other camera mounts and back again. Simply snap the bridge onto the rods and lock it down via a tightening screw. This system comes in two different designs: one that offers mounting points to 15mm LWS and 15mm studio rod systems and another that offers mounting points to 15mm LWS and 19mm studio rod systems. This snap-on design ensures that you will not have to remove accessories that are already attached to the rods. The rig is extremely stable, solid, and durable. The hand grips have high density foam for comfort, support, and stability which can also be rotated 360 degrees via stainless steel Arri Standard Rosettes. Furthermore, the three-joints design allows for operator flexibility and comfort. The Rosette Extension Handles can be extended to fit your needs.  

TILTA UBP-V Universal Battery Plate

TILTA UBP-V (UBP/V, UBP_V, UBPV, UBP V) Universal Battery Plate Universal Battery Plate is designed to be used with a variety of camera systems. It’s available in either V-mount or gold mount versions and has several different power outputs as well as SDI in/out ports. Simply attach one of the various available P-tap cables from one of the P-tap outputs on the battery plate and connect the other end into your camera’s power input port. This provides an efficient way to power your camera as well as external accessories that you’d like to use in your setup. *Note: The Tilta Universal Battery Plate does NOT come with a camera power cable. Power Cables for specific cameras must be purchased separately. Please check the input voltage of your camera to insure adequate power. Never over power your camera with a power cable as this may burn out your camera. Tilta is NOT responsible for user error in over powering your camera devices.

TILTA TT-H03 Professional Handgrip Side Arms with Foam Handgrips - Pair

TILTA TT-H03 (TT/H03, TT_H03, TTH03, TT H03) Professional Handgrip Side Arms with Foam Handgrips - Pair This pair of hand grips feature Arri standard rosette connections so they can be attached to any compatible rosette. The adjustable, extendable arms allow you to adjust the angle and length of the hand grips for maximum operating comfort.

TILTA WLC-T03-HL Nucleus-M Handle Grip - Left

TILTA WLC-T03-HL (WLC/T03-HL, WLC/T03/HL, WLCT03HL, WLC T03 HL) Nucleus-M Handle Grip - Left Nucleus M Left Hand Grip allows you to control your Nucleus M and Nucleus Nano wireless focus motors. The left hand grip can control a single motor assigned by the AC Finger Knob. Individual motor torque can be changed from the handle’s menu. Remote start/stop is possible by plugging a compatible Nucleus-M R/S cable into the open 7-pin port of a motor. This then gives you R/S capabilities through the Hand Grip’s REC button. A-B stops can be created for the Finger Knob and the throw can be adjusted for shorter or longer throws. Powered by (2) 18650 Batteries – NOT included. Handle can be powered by the 7-pin port by the camera.

TILTA FF-T05 Single-sided Cine Follow Focus

TILTA FF-T05 (FF/T05, FF_T05, FFT05, FF T05) Single-sided Cine Follow Focus This single-sided follow focus has a 1:1 hand wheel-to-gear ratio for extremely accurate focus pulls. It attaches to both 15mm LWS and 19mm rod supports by snapping onto the rods. This allows you to adjust, mount and remove it without the need to remove other accessories that are also mounted onto the rods such as matte boxes and lens supports. The gear is attached to a swivel that allows you to rotate it against the lens for a tight fit. You can also slide the whole unit from side-to-side, allowing you to easily adjust to fit any size of lens.

TILTA FF-T04-V2 Dual-Sided Follow Focus Kit

TILTA FF-T04-V2 (FF/T04-V2, FF/T04/V2, FFT04V2, FF T04 V2) Dual-Sided Follow Focus Kit This dual-sided follow focus has a 1:1 hand wheel-to-gear ratio for extremely accurate focus pulls. The dual-sided design allows you to adjust your lens’ focus from either side of the camera. It attaches to both 15mm LWS and 19mm rod supports by snapping onto the rods. This allows you to adjust, mount and remove it without the need to remove other accessories that are also mounted onto the rods such as matte boxes and lens supports. The gear is attached to a swivel that allows you to rotate it against the lens for a tight fit. You can also slide the whole unit from side-to-side, allowing you to easily adjust to fit any size of lens.

TILTA FF-T03 Single-sided DSLR Follow Focus

TILTA FF-T03 (FF/T03, FF_T03, FFT03, FF T03) Single-sided DSLR Follow Focus This single-sided follow focus is designed to be used with DSLR cameras and other small camera rigs. It can be used with 15mm LWS rod setups. Two adjustable hard stops on the focus wheel to allow for accurate focus pulls. There’s also an adjustable damping knob so that you can adjust the hand wheel’s tension to your liking.  

TILTA ESR-T08-THE Top Handle Extension for RED V-RAPTOR

TILTA ESR-T08-THE (ESR/T08-THE, ESR/T08/THE, ESR T08 THE, ESRT08THE) Top Handle Extension for RED V-RAPTOR This Extension Accessory for RED V-RAPTOR allows you to extend your Top Handle which offers additional mounting points and increased flexibility when handling. This Extension includes a removable section that further extends the handle if needed to accommodate larger batteries. The curved design of this handle extension is a great option for expanding ways in which you can operate the camera particularly at lower angles.

TILTA ESR-T08-TH Top Handle for RED V-RAPTOR

TILTA ESR-T08-TH (ESR/T08-TH, ESR/T08/TH, ESRT08TH, ESR T08 TH) Top Handle for RED V-RAPTOR This Top Handle attaches to both the Top Plate and Front Top Plate for RED V-RAPTOR which creates a secure point of contact for handling and operating your camera while also providing additional mounting points for accessories. This Top Handle features both 1/4”-20 and 3/8”-16 mounting points with locating pins as well as one cold shoe receiver. This Handle mounts to our Top Plates via four ¼”-20 screws for improved security especially when supporting heavier camera builds. This Handle can also be broken down into a more compact configuration that only requires the Front Top Plate to mount in order to better accommodate lightweight camera builds. The newly designed 15mm rod mount allows you to mount a single 15mm rod either parallel or perpendicular to the Top Handle, allowing for more flexibility when mounting electronic viewfinders or external monitors.

TILTA ESR-T08-BP-AB Battery Plate for RED V-RAPTOR - Gold Mount

TILTA ESR-T08-BP-AB (ESR/T08-BP-AB, ESR/T08/BP/AB, ESRT08BPAB, ESR T08 BP AB) Battery Plate for RED V-RAPTOR - Gold Mount This Battery Plate adapts the RED V-RAPTOR’s Micro V-Mount Battery Plate to either a Gold Mount or Full Sized V-Mount Battery Plate as well as provides a convenient slot to power and mount the Advanced I/O Module (not included). The V-Mount option features an adjustable plate that allows you to fine tune the height of your battery in relation to the camera body. This allows you to better accommodate different sized batteries and helps keep your build balanced and clean. When using our Top Plate, you can install the Battery Plate Security Attachment for an additional point of contact between your Battery Plate and Camera Cage.

TILTA ESR-T08-B-AB Camera Cage for RED V-RAPTOR Advanced Kit

TILTA ESR-T08-B-AB (ESR/T08-B-AB, ESR/T08/B/AB, ESR T08 B AB, ESRT08BAB) Camera Cage for RED V-RAPTOR Advanced Kit Arm your camera with the Advanced Kit for RED V-RAPTOR. The Full Camera Cage provides protective armor for the RED V-Raptor and greatly expands your options for mounting accessories. The cage features both ¼”-20 and 3/8”-16 threads, integrated NATO Rails for Side Handles and two Arri compatible rosettes. The included 15mm LWS Baseplate and two 15mm Rods allow you to utilize rod based accessories such as matte boxes and follow focus systems. Under the Baseplate you’ll find a Tilta Standard Dovetail Receiver which can be adapted to support Arri Standard Dovetails via our optional Tilta Standard to Arri Standard Multi-Functional Baseplate. The Top Plate and Rear Top Plate offer expanded options for mounting accessories without interfering with the camera’s ventilation. The Top Plates include 1/4″-20 and 3/8”-16 mounting points, both with and without locating pins and a single Cold Shoe Receiver. The Rear Top Plate also includes exhaust vents engineered to mimic the V-Raptor’s integrated ventilation system in order to provide maximum cooling capability. The Top Handle attaches to both the Top Plate and Front Top Plate which creates a secure point of contact for handling and operating your camera while also providing additional mounting points for accessories. This Top Handle features both 1/4”-20 and 3/8”-16 mounting points with locating pins as well as one cold shoe receiver. This Top Handle can also be broken down into a more compact configuration that only requires the Front Top Plate to mount in order to better accommodate lightweight camera builds. The Top Handle’s newly designed 15mm rod mount allows you to mount a single 15mm rod either parallel or perpendicular to the Top Handle, allowing for more flexibility when mounting electronic viewfinders or external monitors. The included Bottom Mounting Plate attaches near the bottom of the Camera Cage, offers additional 1/4”-20 mounting points with locating pins, and serves as an alternative location to mount the Advanced I/O Module. The Right and Left Side Single Rod Holders mount along the side of the Full Camera Cage which provide a lightweight alternative to the baseplate. The included Battery Plate adapts the RED V-RAPTOR’s Micro V-Mount Battery Plate to either a Gold Mount or Full Sized V-Mount Battery Plate, as well as provides a convenient slot to power and mount the included Advanced I/O Module. The V-Mount option features an adjustable plate that allows you to fine tune the height of your battery to better accommodate different sized batteries which helps keep your build balanced and clean. This Advanced I/O Module utilizes an integrated V-RAPTOR EXT Cable that expands communication with the camera body and offers increased functionality for Run Stop and Timecode via additional ports. This Module can be mounted in a few different locations on the V-Raptor’s Camera Cage including the Top Handle, Top Plate, Bottom Mounting Plate or the integrated slot on the Battery Plate which can provide power and support the module. When mounting the module in different locations other than the Battery Plate, the module can be powered via a 2 Pin Lemo input.

TILTA ESR-T08-A Camera Cage for RED V-RAPTOR Basic Kit

TILTA ESR-T08-A (ESR/T08-A, ESR/T08/A, ESRT08A, ESR T08 A) Camera Cage for RED V-RAPTOR Basic Kit Arm your camera with the Basic Kit for RED V-RAPTOR. The Full Camera Cage provides protective armor for the RED V-Raptor and greatly expands your options for mounting accessories. The cage features both ¼”-20 and 3/8”-16 threads, integrated NATO Rails for Side Handles and two Arri compatible rosettes. The base of the cage also provides several mounting options for attaching your camera to various quick release systems and natively supports the included LWS Baseplate. The included 15mm LWS Baseplate and two 15mm Rods allow you to utilize rod based accessories such as matte boxes and follow focus systems. Under the Baseplate you’ll find a Tilta Standard Dovetail Receiver which can be adapted to support Arri Standard Dovetails via our optional Tilta Standard to Arri Standard Multi-Functional Baseplate. This baseplate can also mount to third party quick release plates via 1/4″-20 and 3/8″-16 threads. The Top Plate and Rear Top Plate offer expanded options for mounting accessories without interfering with the camera’s ventilation. The Top Plates include 1/4″-20 and 3/8”-16 mounting points both with and without locating pins and a Cold Shoe Receiver. The Rear Top Plate also includes exhaust vents engineered to mimic the V-Raptor’s integrated ventilation system in order to provide maximum cooling capability. The Top Handle attaches to both the Top Plate and Front Top Plate which creates a secure point of contact for handling and operating your camera while also providing additional mounting points for accessories. This Top Handle features both 1/4”-20 and 3/8”-16 mounting points with locating pins as well as one cold shoe receiver. This Top Handle can also be broken down into a more compact configuration that only requires the Front Top Plate to mount, which better accommodates lightweight camera builds. The Top Handle’s newly designed 15mm rod mount allows you to mount a single 15mm rod either parallel or perpendicular to the Top Handle, allowing for more flexibility when mounting electronic viewfinders or external monitors. The included Bottom Mounting Plate attaches near the bottom of the Camera Cage, offers additional ¼”-20 mounting points with locating pins, and serves as an alternative location to mount the Advanced I/O Module. (not included) The Right and Left Side Single Rod Holders mount along the side of the Full Camera Cage and provide a lightweight alternative to the baseplate.

TILTA ESR-T07-V Camera Cage for Alexa Mini LF/Mini - V Mount

TILTA ESR-T07-V (ESR/T07-V, ESR/T07/V, ESRT07V, ESR T07 V) Camera Cage for Alexa Mini LF/Mini - V Mount Arm your camera with this Tilta camera cage specifically designed for the Arri Alexa Mini LF and Alexa Mini. It provides a high quality aluminum, CNC-milled protective armor for your camera that has several ¼”-20 and ⅜”-16 mounting points for attaching accessories. The Tilta Standard Battery Plate for Arri Alexa Mini LF/Mini Cage, available in either Gold Mount or V-Mount, integrates with the camera body to provide several power and video in and outputs. Pins on the top NATO rail of the plate directly communicate with the top plate and top handle when attached which transfers power output functionality to them. The Top Plate Power Connection Module offers power distribution off the top plate while the Top Handle Power Connection Module offers power distribution off the top handle. These allow you to power your accessories from virtually anywhere on the cage. The battery plate is attached to a sliding bridge mount so you can move it away from the back of the camera body to access the various buttons and ports and then slide it back right up to the camera body for a compact setup while operating. An EVF holder can be mounted off the top plate which allows for 360 degree rotation so that you can customize how you want to view your Alexa Mini LF/Mini EVF while operating. Top handle extensions are included to allow you to extend the length of the top handle over the back of the setup for more comfortable operating in various positions. Left and right side arms help to fully stabilize the cage and provide protection as well as a variety of mounting points to all sides of the cage. These side arms include Arri Standard Rosette connections which allow you to easily connect handles for a compact handheld operating setup. On the bottom of the cage is a 15mm LWS baseplate that allows you to attach various accessories via 15mm rods. The plate can mount to a Tilta Standard Dovetail to allow you to easily slide on and off of an operating setup. The optional Tilta Standard to Arri Standard Multi-Functional Baseplate can be purchased to adapt this cage to mount onto an Arri Standard Dovetail if needed.  

TILTA ES-T20-B-V Camera Cage for Sony FX6 Advanced Kit

TILTA ES-T20-B-V (ES/T20-B-V, ES/T20/B/V, EST20BV, ES T20 B V) Camera Cage for Sony FX6 Advanced Kit Arm your camera with the Tilta Camera Cage for Sony FX6 Advanced Kit The Multi-Functional Top Plate for Sony FX6 fits snugly around the FX6’s original top handle and supports our optional Top Handle for FX6 which can be adjusted for balance and includes a monitor mount for the FX6’s LCD Monitor Bracket. The Top Plate also includes Dual 15mm LWS rod adapters which allow you to easily mount accessories via 15mm rods above your lens. The Quick Release Baseplate for Sony FX6 also allows you to attach various accessories via 15mm LWS rods on either the front or back side of the baseplate. The Dual Arri Rosettes allow for mounting additional accessories such as extended arms or handles for handheld shooting. The Baseplate natively connects to our Tilta Standard Dovetails and can be adapted to Arri Standard via our Tilta Standard to Arri Standard Multi-Functional Baseplate. A built-in lens adapter support bracket is also included on the front side of the plate. The Side Arm for Sony FX6 offers even more protection and provides several 1/4″-20 and 3/8″-16 mounting points with threads for various locating pins to allow you to mount a variety of accessories. The Side Arm also includes a reserved space for 3 reusable Camera Index Stickers for professional and clear labeling of your camera’s position in multi-camera environments. The Wireless Video Mounting Bracket for Sony FX6 allows you to mount various Wireless Video Transmitters via a 90 degree 1/4″-20 threaded bracket. This allows for clean and convenient mounting of wireless video transmitters and other similar accessories. The Battery Plate for Sony FX6 V-Mount Type I quickly mounts and locks into the battery chamber of the Sony FX6 and can be further secured by a connection to the Multi Functional Top Plate. The Battery Plate features 2x 14.8V P-Tap ports, 1x 14.8V 2 Pin Lemo Port, and 1x 5V USB Port. *Please Note the Battery Plate must be connected via the FX6’s DC port to provide power* WARNING: The Rosette Mount on the Baseplate may need to be removed to provide additional clearance for the Sony FX6 Side Handle.  Please exercise caution when rotating the handle as to not scratch it against the cage and remove the Rosette Mount if needed. 

TILTA ES-T20-BTP-V Battery Plate for Sony FX6

TILTA ES-T20-BTP-V (ES/T20-BTP-V, ES/T20/BTP/V, EST20BTPV, ES T20 BTP V) Battery Plate for Sony FX6 This Battery Plate quickly mounts and locks into the battery chamber of the Sony FX6 and can be further secured by a connection to the Multi Functional Top Plate. This allows you to use higher capacity Gold or V-Mount batteries to power your camera setup, keeping battery swaps to a minimum. *Please Note the Battery Plate must be connected via the FX6’s DC port to provide power*

TILTA ES-T20-C-V Camera Cage for Sony FX6 Vertical Mounting Kit - V Mount

TILTA ES-T20-C-V (ES/T20-C-V, ES/T20/C/V, EST20CV, ES T20 C V) Camera Cage for Sony FX6 Vertical Mounting Kit - V Mount Arm your camera with the Tilta Camera Cage for Sony FX6 Vertical Mounting Kit The Multi-Functional Top Plate for Sony FX6 fits snugly around the FX6’s original top handle and supports our optional Top Handle for FX6 which can be adjusted for balance and includes a monitor mount for the FX6’s LCD Monitor Bracket. The Top Plate also includes Dual 15mm LWS rod adapters which allow you to easily mount accessories via 15mm rods above your lens. The Adjustable Top Handle can rotate 180 degrees to fulfill your vertical shooting needs. The handle is also adjustable forward and backwards in either position to help you find your camera’s center of gravity. The Quick Release Baseplate for Sony FX6 allows you to attach various accessories via 15mm LWS rods on either the front or back side of the baseplate. The Dual Arri Rosettes allow for mounting additional accessories such as extended arms or handles for handheld shooting. The Baseplate natively connects to our Tilta Standard Dovetails and can be adapted to Arri Standard via our Tilta Standard to Arri Standard Multi-Functional Baseplate. A built-in lens adapter support bracket is also included on the front side of the plate. The Side Arm for Sony FX6 offers even more protection and provides several 1/4″-20 and 3/8″-16 mounting points with threads for various locating pins to allow you to mount a variety of accessories. The Side Arm also includes a reserved space for 3 reusable Camera Index Stickers for professional and clear labeling of your camera’s position in multi-camera environments. The Vertical Mounting Plate features a built in cold shoe, 1/4″-20 and 3/8″-16 threads for mounting wireless video transmitters, on-board monitors, external microphones and other accessories while shooting vertically. The Wireless Video Mounting Bracket for Sony FX6 allows you to mount various Wireless Video Transmitters via a 90 degree 1/4″-20 threaded bracket. This allows for clean and convenient mounting of wireless video transmitters and other similar accessories. The Battery Plate for Sony FX6 V-Mount Type I quickly mounts and locks into the battery chamber of the Sony FX6 and can be further secured by a connection to the Multi Functional Top Plate. The Battery Plate features 2x 14.8V P-Tap ports, 1x 14.8V 2 Pin Lemo Port, and 1x 5V USB Port. *Please Note the Battery Plate must be connected via the FX6’s DC port to provide power* WARNING: The Rosette Mount on the Baseplate may need to be removed to provide additional clearance for the Sony FX6 Side Handle.  Please exercise caution when rotating the handle as to not scratch it against the cage and remove the Rosette Mount if needed.

TILTA ES-T18-BTP-V Battery Plate for Sony PXW-FX9 - V-Mount

TILTA ES-T18-BTP-V (ES/T18-BTP-V, ES/T18/BTP/V, EST18BTPV, ES T18 BTP V) Battery Plate for Sony PXW-FX9 - V-Mount The Tilta Battery Plate for Sony PXW-FX9 Cage attaches directly to the back of the top plate on the Tilta FX9 Camera Cage and hugs the back side of the camera. The battery plate provides several different power outputs to allow you to power accessories and adjusts to various distances from the camera body.

TILTA ES-T18-AB Camera Cage for Sony PXW-FX9 - Gold Mount

TILTA ES-T18-AB (ES/T18-AB, ES/T18/AB, EST18AB, ES T18 AB) Camera Cage for Sony PXW-FX9 - Gold Mount Arm your camera with this Tilta camera cage specifically designed for the Sony PXW-FX9. Gold Mount Battery Plate The battery plate attaches to the included top plate on the back of your camera and allows you to power the camera and accessories. It provides two 2-pin LEMO and three D-Tap outputs, and comes with an external 4-pin XLR power input module. The battery plate can be adjusted back and forth from the back of the camera via a bracket to help optimally balance the camera on your shoulder. VCT-U14 Baseplate with Shoulder Pad The VCT-U14 baseplate features an ergonomic shoulder pad and a 15mm LWS rod mount on the front and back. Two 7.9" rods are included for attaching accessories such as a follow focus. Standard ARRI-style rosettes on the sides of the baseplate allow you to install extension arms or additional handgrips, and an integrated, adjustable lens support on the front provides support for longer, heavier lenses. The baseplate also features a quick release plate on the bottom that provides 1/4"-20 and 3/8"-16 tripod mount threads, and this plate is interchangeable with select other Tilta quick release plates. Top and Side Plates The top plate attaches to the top of the camera without interfering with the camera's original top handle. It features a 15mm rod clamp on top for mounting an EVF and accessories to included 1.8" short 15mm rods. The side plate connects the top plate with the baseplate, and both the top and side plates offer multiple 1/4"-20 and 3/8"-16 ARRI-style anti-twist threads to incorporate additional accessories.

TILTA BS-T10 15mm Quick Release Baseplate for Sony FS7

TILTA BS-T10 (BS/T10, BS_T10, BST10, BS T10) 15mm Quick Release Baseplate for Sony FS7 15mm LWS baseplate is used in conjunction with the Tilta for Sony FS7 camera rig. It’s set up as both a standard baseplate that can be attached to Sony VCT-U14 plates as well as an ergonomic shoulder pad, making it easy to go from tripod to handheld operating in no time. It also features mounting points for 15mm LWS rods on the back and front to allow you to use 15mm rods in a variety of ways (such as mounting accessories on the front and counterweights and/or a battery plate on the back). This plate also features Arri Standard Rosette connections on the left and right side to be able to attach hand grips for handheld operation.

TILTA BS-T01 15mm LWS Baseplate for Red DSMC2

TILTA BS-T01 (BS/T01, BS_T01, BST01, BS T01) 15mm LWS Baseplate for Red DSMC2 A 15mm LWS baseplate is used in conjunction with the Red DSMC2 line of Tilta camera cages. It’s set up to easily attach to the Tilta Standard Lightweight Dovetail Plate and has a very low profile to make your camera setup as compact as possible.

TILTA ARM-T03 Armorman 3.0 Gimbal Support System

TILTA ARM-T03 (ARM/T03, ARM_T03, ARMT03, ARM T03) Armorman 3.0 Gimbal Support System The Armorman 3.0 was designed to offer comfort and support while operating your gimbal by transferring the weight of the gimbal to your body’s core, taking significant weight off your arms. This allows you to operate your gimbal comfortably, for a much longer period of time while not sacrificing flexibility or performance. Two mechanical arms with shock-absorbing stabilized systems attach to the back of the adjustable vest or on top of the vest in high mode. When engaged, the arms have two adjustable tension knobs on each arm to allow you to adjust the tension in relation to the weight of your gimbal rig as well as your preferred operation style. The arms attach to any top bar gimbal system or gimbal ring system with the provided mounts or support cups, which you attach by just sliding the attachment right into the arms. Paired with the Universal Gimbal Ring Adapters and Nucleus M, the Armorman 3.0 can become a single operator system. When you’re done operating, simply disengage the arms by pulling the release cords for each arm (in regular mode) and then comfortably rest them on the sides of the vest with the attached arm receiver. This allows you to keep the vest on in-between shots and then when you’re ready to operate again, simply re-engage the arms and re-attach the gimbal. Supports systems up to 50lbs and gimbals with 25mm or 30mm diameters including the Advanced & Basic Ring Grips.  

TILTA ARM-T03-SC Armorman 3.0 Support Cup

TILTA ARM-T03-SC (ARM/T03-SC, ARM/T03/SC, ARMT03SC, ARM T03 SC) Armorman 3.0 Support Cup The Armor Man 3.0 Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms while they are in the lower operating position. When you want to attach the Armor Man to the gimbal, simply fit the side arms of the gimbal into the support cups and then re-grab the arms like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the handles.  

TILTA ARM-T03-NMSC Armorman 3.0 Nucleus-M Handle Support Cup

TILTA ARM-T03-NMSC (ARM/T03-NMSC, ARM/T03/NMSC, ARM T03 NMSC, ARMT03NMSC) Armorman 3.0 Nucleus-M Handle Support Cup The Armor Man 3.0 Nucleus-M Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when using the Nucleus-M’s hand grips with your gimbal system. When you want to attach the Armor Man to the gimbal, simply fit the gimbal-mounted Nucleus-M hand grips into the support cups and then re-grab the hand grips like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the hand grips.

TILTA TA-T32-A-B Camera Cage for Canon R5C Basic Kit – Black

TILTA TA-T32-A-B (TA/T32-A-B, TA/T32/A/B, TAT32AB, TA T32 A B) Camera Cage for Canon R5C Basic Kit – Black This Camera Cage offers enhanced protection for the Canon R5C while expanding mounting options for various camera accessories. The cage features an ARRI Rosette Connection, two cold shoe receivers, and NATO Rail connections on the top and left side of the cage. These connections are perfect options for mounting any of our optional Type IV/VI Side Handles or our Compact NATO Top Handle. The cage also features multiple ¼”-20 mounting points with locating pins, several M3 threads, and integrated slots for a shoulder strap. The included Quick Release Top Handle can mount to the cold shoe receiver found on the top of the cage and provides a convenient way to handle the camera and achieve low angle shots. The handle itself provides several 1/4”-20 and 3/8”-16 mounting points as well as two cold shoe receivers on the front and back of the handle. A 15mm horizontal rod mount is built into the handle to allow for various rigging possibilities such as mounting an EVF or external monitor via a 15mm rod. The optional Adjustable Top Handle can be attached to quickly switch between horizontal and vertical shooting configurations. The cage connects to your camera body via a ¼”-20 screw and utilizes an additional point of contact via a locating pin in order to prevent the camera from moving within the cage. The built in silicone cushion helps hold the camera body in place while protecting it from any scratches that could be caused by the cage. The base of the cage also provides a couple mounting options for securing the system to different quick release plates and natively supports our Smart V Mount Battery Baseplate and LWS Baseplate Type IV. The bottom plate allows you to easily access the battery compartment and also includes a slot for an included magnetic screwdriver. The included Clamp Attachment connects to the side of the cage and allows you to secure the included HDMI to Micro HDMI Adapter and an optional USB-C Cable. This accessory will help prevent these cables from coming loose when shooting and will provide additional protection for the ports on your camera body. This can be specifically helpful when using an external recorder as a loose cable could very possibly ruin a take if accidentally disconnected. The included Lens Mount Support Bracket attaches to the front of the cage via M3 screws and provides additional support for an RF to EF Lens Mount Adapter. This provides an additional point of contact between your cage and lens adapter which helps create a more secure connection and limits any shifts in the image that could be caused by follow focus systems.  

TILTA ESR-T06-C Arri ALEXA MINI Rig Kit 3

Tilta ESR-T06-C (ESRT06C, ESR T06 C, ESR/T06/C, esr-t06-c) Arri ALEXA MINI Rig Kit 3 Hollywood film industry standard inner cable control system. High quality aluminum material, Seiko CNC manufacturing and ultra hard anodic oxidation surface treatment. Attention to details, all locking screws are made of titanium alloy material. Versatile design, you can equip your ALEXA MINI camera in lightweight or professional style.   It’s perfect for gimbal system or large zoom lenses. Includes:  1 x 4*5.65 carbon fibre matte box(clamp-on) MB-T12 • 1 x Single-sided cinema follow focus（FF-T05） • 1 x 15mm lightweight baseplate • 1 x Base connection plate • 1 x Short top plate • 1 x Long top plate • 1 x 15mm top rod adapter • 2 x Side arm  • 1 x Handle  • 1 x EVF holder（ARRI standard interface） • 1 x EVF holder (dual rods)  • 1 x EVF holder(single rod) • 1 x Battery plate rod adapter • 2 x 15mm*150mm aluminium rod • 2 x 15mm*300mm aluminium rod • 2 x 15mm*200mm aluminium rod • 2 x 15mm rod connection screw  • 1 x(ESR-P02) standard battery plate(SDI in/out,3 power outputs,with P-TAP cable)

TILTA ESR-T06-B Arri ALEXA MINI Rig Kit 2

Tilta ESR-T06-B (ESRT06B, ESR T06 B, ESR/T06/B, esr-t06-b) Arri ALEXA MINI Rig Kit 2 Hollywood film industry standard inner cable control system. High quality aluminum material, Seiko CNC manufacturing and ultra hard anodic oxidation surface treatment. Attention to details, all locking screws are made of titanium alloy material. Versatile design, you can equip your ALEXA MINI camera in lightweight or professional style. It’s perfect for gimbal system or large zoom lenses. Includes: • 1 x12” dovetail plate（ARRI standard） • 1 x 15mm lightweight baseplate • 1 x Base connection plate • 1 x Short top plate • 1 x Long top plate • 1 x 15mm top rod adapter • 2 x Side arm  • 1 x Handle  • 1 x EVF holder（ARRI standard interface） • 1 x EVF holder (dual rods)  • 1 x EVF holder(single rod) • 1 x Battery plate rod adapter • 2 x 15mm*150mm aluminium rod • 2 x 15mm*300mm aluminium rod • 2 x 19mm*450mm stainless steel rod • 2 x 19mm*250mm stainless steel rod • 1 x(ESR-P02) standard battery plate(SDI in/out,3 power outputs,with P-TAP cable)

TILTA ESR-T06-A Arri ALEXA MINI Rig Kit 1

Tilta ESR-T06-A (ESRT06A, ESR T06 A, ESR/T06/A, esr-t06-a) Arri ALEXA MINI Rig Kit 1 Hollywood film industry standard inner cable control system. High quality aluminum material, Seiko CNC manufacturing and ultra hard anodic oxidation surface treatment. Attention to details, all locking screws are made of titanium alloy material. Versatile design, you can equip your ALEXA MINI camera in lightweight or professional style. It’s perfect for gimbal system or large zoom lenses.