TILTA HDA-SRK Speed Rail Car Mounting Kit

TILTA HDA-SRK (HDA/SRK, HDA_SRK, HDASRK, HDA SRK) Speed Rail Car Mounting Kit Arm your vehicle with the Speed Rail Car Mounting Kit designed for the Hydra Predator and other car mounted shock absorbing arms! This kit allows you to build custom speed rail rigs to support various shock absorbing arms in multiple configurations. The kit is built around 6 pieces of speed rail, of two different sizes, that can be used on their own or interconnected to create longer pieces for specific rigging needs. The 4 adjustable mounting clamps allow you to connect the speed rail in almost any configuration. The kit includes 4 high capacity suction cups, each individually rated for 50 kg or around 110lbs. These suction cups connect to the speed rail via adjustable clamps, allowing them to be placed in almost any position in order to accommodate most vehicles easily. Utilizing 4 suction cups allows you to build an incredibly stabile foundation in which to mount shock absorbing arms or other equipment. The included Front Tow Hook Adapter allows you to connect the system to any vehicle that already has that mounting point. which helps create a secure connection that relies on more than just suction.

TILTA ESR-T13-RB-V Sony Venice Rialto Backpack

TILTA ESR-T13-RB-V (ESR/T13-RB-V, ESR/T13/RB/V, ESR T13 RB V, ESRT13RBV) Sony Venice Rialto Backpack The Sony Venice Rialto Backpack incorporates a dovetail and small baseplate to mount the Rialto camera body onto. When coupled with the sensor block’s cage, it provides you with a comfortable, ergonomic way to operate and transport your whole Rialto camera setup. The backpack also has a battery plate.

TT-C06-D-07 19mm Studio Tilta-Standard to ARRI-Standard Base Plate

TILTA TT-C06-D-07 (TT/C06-D-07, TT/C06/D/07, TTC06D07, TT C06 D 07) 19mm Studio Tilta-Standard to ARRI-Standard Base Plate This 19mm studio baseplate is designed to adapt a Tilta standard baseplate to an Arri standard baseplate to allow you to use your camera rig on an Arri standard-sized dovetail. The top section of the baseplate that allows for this function can also be removed and replaced with a flat top, which allows it to double as a regular Arri standard-sized baseplate. It uses a hard-anodized surface design and is CNC-milled from a lightweight and durable high-impact aluminum 7075 alloy.

TILTA UH-T04 Universal Pro Hand Grip System

TILTA UH-T04 (UH/T04, UH_T04, UHT04, UH T04) Universal Pro Hand Grip System This high strength universal hand grip system clamps directly onto the rods of your camera setup, allowing for super fast transitions from shoulder mounted operation to other camera mounts and back again. Simply snap the bridge onto the rods and lock it down via a tightening screw. This system comes in two different designs: one that offers mounting points to 15mm LWS and 15mm studio rod systems and another that offers mounting points to 15mm LWS and 19mm studio rod systems. This snap-on design ensures that you will not have to remove accessories that are already attached to the rods. The rig is extremely stable, solid, and durable. The hand grips have high density foam for comfort, support, and stability which can also be rotated 360 degrees via stainless steel Arri Standard Rosettes. Furthermore, the three-joints design allows for operator flexibility and comfort. The Rosette Extension Handles can be extended to fit your needs.  

TILTA UBP-V Universal Battery Plate

TILTA UBP-V (UBP/V, UBP_V, UBPV, UBP V) Universal Battery Plate Universal Battery Plate is designed to be used with a variety of camera systems. It’s available in either V-mount or gold mount versions and has several different power outputs as well as SDI in/out ports. Simply attach one of the various available P-tap cables from one of the P-tap outputs on the battery plate and connect the other end into your camera’s power input port. This provides an efficient way to power your camera as well as external accessories that you’d like to use in your setup. *Note: The Tilta Universal Battery Plate does NOT come with a camera power cable. Power Cables for specific cameras must be purchased separately. Please check the input voltage of your camera to insure adequate power. Never over power your camera with a power cable as this may burn out your camera. Tilta is NOT responsible for user error in over powering your camera devices.

TILTA ESR-T08-A Camera Cage for RED V-RAPTOR Basic Kit

TILTA ESR-T08-A (ESR/T08-A, ESR/T08/A, ESRT08A, ESR T08 A) Camera Cage for RED V-RAPTOR Basic Kit Arm your camera with the Basic Kit for RED V-RAPTOR. The Full Camera Cage provides protective armor for the RED V-Raptor and greatly expands your options for mounting accessories. The cage features both ¼”-20 and 3/8”-16 threads, integrated NATO Rails for Side Handles and two Arri compatible rosettes. The base of the cage also provides several mounting options for attaching your camera to various quick release systems and natively supports the included LWS Baseplate. The included 15mm LWS Baseplate and two 15mm Rods allow you to utilize rod based accessories such as matte boxes and follow focus systems. Under the Baseplate you’ll find a Tilta Standard Dovetail Receiver which can be adapted to support Arri Standard Dovetails via our optional Tilta Standard to Arri Standard Multi-Functional Baseplate. This baseplate can also mount to third party quick release plates via 1/4″-20 and 3/8″-16 threads. The Top Plate and Rear Top Plate offer expanded options for mounting accessories without interfering with the camera’s ventilation. The Top Plates include 1/4″-20 and 3/8”-16 mounting points both with and without locating pins and a Cold Shoe Receiver. The Rear Top Plate also includes exhaust vents engineered to mimic the V-Raptor’s integrated ventilation system in order to provide maximum cooling capability. The Top Handle attaches to both the Top Plate and Front Top Plate which creates a secure point of contact for handling and operating your camera while also providing additional mounting points for accessories. This Top Handle features both 1/4”-20 and 3/8”-16 mounting points with locating pins as well as one cold shoe receiver. This Top Handle can also be broken down into a more compact configuration that only requires the Front Top Plate to mount, which better accommodates lightweight camera builds. The Top Handle’s newly designed 15mm rod mount allows you to mount a single 15mm rod either parallel or perpendicular to the Top Handle, allowing for more flexibility when mounting electronic viewfinders or external monitors. The included Bottom Mounting Plate attaches near the bottom of the Camera Cage, offers additional ¼”-20 mounting points with locating pins, and serves as an alternative location to mount the Advanced I/O Module. (not included) The Right and Left Side Single Rod Holders mount along the side of the Full Camera Cage and provide a lightweight alternative to the baseplate.