Manfrotto Xpro Monopod, used

Manfrotto Xpro Monopod, used(FMP59560LPSH) Excellent condition, 3 months warranty  Manfrotto's XPRO Video Monopod with MVH500 head has been designed for professional videography. It has a max weight limit of 5kg enabling the use of bigger and heavier rigs. The monopod features Manfrotto's state-of-the-art leg construction with the perfect combination of rigidity and locking safety. A full fluid base ensures shooting smoothness on pan, tilt, and swivel. Its 3 retractable feet make it extremely sturdy, whilst its counterbalance system allows you to manage heavy equipment.    

Manfrotto HiLite 1.8 x 2.15m Shapers & Masks

Manfrotto HiLite 1.8 x 2.15m Shapers & Masks   The HiLite Shapers & Masks includes three opaque black panels (1x 86cm wide, 2x 66cm wide) that hang on the front of the HiLite background 1.8 x 2.15m LL LB8867 (not included). The shapers allow the photographer maximum control of the width of the strip of light leaving the HiLite softbox. Alternatively, the photographer can split the light into two strips on either side of the shaper panel. Each position offers a different lighting effect on the subject allowing the photographer to be as creative as they wish.   This set also includes three optional masks, which attach to the top and the sides of the HiLite. These ensure no light is spilled from the top or the sides of the HiLite giving the photographer complete control especially when shooting in small spaces.   The shapers attach to the Hilite very easily. They are supplied with a collapsible aluminium pole that simply clips to the top of the HiLite and the shapers then hang from the pole. To ensure maximum stability two specially designed HiLite sand bags are included which sit over the lower HiLite rods.

Manfrotto Skylite Rapid Frame Midi 1.5 x 1.5m (5' x 5')

Skylite Rapid Frame Midi 1.5 x 1.5m (5' x 5'), LL LR815 (LL_LR815, LL/LR815, LL-LR815, LR815) The Skylite Rapid Frame Midi 1.5 x 1.5m is an Aluminium frame for Skylight Rapid frame system. Fabrics for the Skylite frames are available separately so that you can mix and match as you choose.This frame is designed to be used with the 1.5 x 1.5m fabric covers.

Manfrotto Advanced Befree Backpack III

Advanced Befree Backpack III, MB MA3-BP-BF (MB/MA3-BP-BF, MB_MA3-BP-BF, MB-MA3-BP-BF, MA3-BP-BF) The Manfrotto Advanced Befree backpack III is big enough for a large DSLR kit, devices and personal belongings.The lower compartment with a rear opening, holds DSLR camera such as Canon 5D Mark IV with a 70/200 mm f/2.8 lens attached and up to 6 additional lenses.The padded camera compartment features the brand-new Manfrotto M-Guard™ Protection System. Made of special high-density EVA foam, it provides exceptional shock absorbing response with a super slim profile. The customizable folding patterns allow maximum versatility to fully protect camera gear while maximizing the use of space.There is also plenty of space for your personal belongings in the upper compartment. The dedicated device compartment can hold a 15 inch laptop along with a 9.7 inch tablet and can be opened easily without moving your camera equipment or personal belongings. This ease of access is especially handy at airport security checks.Designed for versatility, the Advanced Befree can be used as a camera backpack, a laptop backpack or a daypack. It can transform to a travel daypack in an instant by removing internal dividers and collapsing the center partition to merge the two sections. This backpack for photographers from the acclaimed Advanced collection is made of tough, high performance materials. Carry your tripod in 2 ways: either secure it with the durable side strap or inside the expandable tripod side pocket for increased protection - the new Befree Advanced tripod series fits perfectly there. The same pocket can be used to carry a DJI Osmo mobile. The bag is lined by several internal and external pockets to organize your accessories and personal items.A rain cover is also included for wet weather. This customizable design with the added security of rear access is perfect for professionals and amateur photographers heading out for day trips or long-distance travel.

Manfrotto SAND BAG 35 KG

SAND BAG 35 KG, G300 (MAN-G300, MAN_G300, MAN/G300, MAN G300) Extra large sandbag for weighting down lighting stands, tripod legs or booms. Made of durable black nylon.

Manfrotto Advanced Fast Backpack M III

Advanced Fast Backpack M III, MB MA3-BP-FM (MB_MA3-BP-FM, MB-MA3-BP-FM, MB/MA3-BP-FM, MA3-BP-FM) A multi-function camera and laptop Backpack for fast paced shooting. The Manfrotto Advanced Fast backpack III was designed to be extremely versatile to meet your different preference of use: double side access to main gear compartment, top access for personal items or a second camera body as you prefer, front opening to arrange easily your entire camera set up. The bag was designed to easily hold a full-frame mirrorless camera with an attached 70-200 mm f/4 along with 3 additional lenses and a flash.The backpack is divided into two compartments: the bottom half is dedicated to photography gear and contains additional padding for added security, while the top half can be used for personal items or a second camera body if you prefer.The padded camera compartment features the brand-new Manfrotto M-Guard™ Protection System which is made of special high-density EVA foam, it provides exceptional shock absorbing response with a super slim profile. The customized folding patterns allow maximum versatility to fully protect camera gear while maximizing the use of space.The bag includes a compartment which can store a 15 inch laptop. Two additional external side zippered pockets allow for extra personal items along on a shoot, and the clever frontal tripod straps allow for a travel size tripod to be attached to the bag.All external fabric are treated making the bag water repellantwhich can be further reinforced by the supplied raincover in case of adverse weather conditions.

Manfrotto Advanced Travel Backpack M III

Advanced Travel Backpack M III, MB MA3-BP-T (MB-MA3-BP-T, MB_MA3-BP-T, MB/MA3-BP-T, MA3-BP-T) A must have compact, easy to carry camera and laptop backpack for your travels. The Manfrotto Advanced Travel Backpack III for DSLR or Mirrorless is an original bag that stores and carries your camera gear and media accessories. With an upper and lower section design reachable from just one side of the bag plus an expandable side pocket, you can customise this bag to fit your exact needs. It can store a DSLR such as a Canon EOS 5D mark IV with an additional 3-4 lenses depending on size (such as a 16-35/2.8, 24-70/2.8 or a 70-200/2.8). Alternatively, it can hold a full-frame mirrorless camera such as full frame Sony Alpha with a 70-200 mm f/4 plus DJI Mavic Pro 2 with multiple batteries and remote control.The padded camera compartment features the brand-new Manfrotto M-Guard™ Protection System. Made of special high-density EVA foam, it provides exceptional shock absorbing response with a super slim profile. The customizable folding patterns allow maximum versatility to fully protect camera gear while maximizing the use of space.If more room is needed an extendable padded side pocket gives additional space for a travel size tripod or a handheld gimbal such as a DJI Osmo Mobile 2. In addition, the bag also comes with a smart front external tripod connection.Handy side access points keep your kit within easy reach so you’ll never miss that essential shot, and the top compartment is ideal for your accessories and personal items. This design means you’ll never have to fiddle around to get hold of what you need either. Other features include a dedicated 15 inch laptop pocket, padded to add an extra layer of protection, and easy to reach when you’re on the move. This bag can even be transformed into a daypack as you please by simply removing the dividers.All external fabric are treated making the bag water repellant which can be further reinforced by the supplied raincover in case of adverse weather conditions.

Manfrotto Element MII Video Monopod Twis

Element MII Video Monopod Twis, MVMELMIIA4LIVE (MAN-MVMELMIIA4LIVE, MAN_MVMELMIIA4LIVE, MAN/MVMELMIIA4LIVE, MAN MVMELMIIA4LIVE) The go-to product for hobbyist and traveller videographers, this sturdy and ultra-portable Manfrotto video monopod kit, is ideal for shooting weddings, corporate videos, interviews and documentaries and all those dynamic situations where agility and precision really count.Compact, lightweight and brilliantly smooth, it combines sophisticated performance with simplicity of use. It’s quick and easy to both fold down and pack away and works perfectly for CSC and DSLR cameras.ELEMENT MII Video Monopod Kit incorporates a non-detachable compact fluid video head which, thanks to the Manfrotto Fluid Drag System, gives ultra-smooth and flawless tilting.It is supremely light and stable , being able to support up to 4Kg. ELEMENT MII Video Monopod Kit has been engineered to deliver maximum portability, with a removable, collapsible pan bar and fully foldable, extra-lightweight head and base feet.The entire kit weighs just 1Kg and folds to a compact length of 60cm. Able to be collapsed, packed away in no time and carried anywhere with ease, this kit truly offers best-in-class stability that’s perfect for on-the-go.The Element MII Video Monopod features high-performing, ergonomic twist locks. These make set-up and adjustment much easier and more comfortable, while also offering maximum grip, quick leg opening and extreme compactness. The locking mechanismThe Element MII Video Monopod also has an incredibly smooth panning action, thanks to the patented, lightweight fluid cartridge in the base. Leveraging the judder-free base sphere, tilt position can be reached on the most uneven surfaces, allowing users to take advantage of pan fluidity in all sorts of conditions.The Element MII Video Monopod’s lightweight aluminium body makes it easy to carry, plus the durable design means it stays totally rigid when the sections are fully open.Like all Manfrotto products, the Element MII Fluid Video Monopod Kit is made to the highest quality and design standards. Aside from its wealth of high-performing features, the beautiful aesthetics and striking red leg graphics put it in a class apart.

Manfrotto Advanced Hybrid Backpack M III

Advanced Hybrid Backpack M III, MB MA3-BP-H (MB_MA3-BP-H, MB/MA3-BP-H, MB-MA3-BP-H, MA3-BP-H) Extremely versatile 3-in-1 camera bag: backpack, shoulder bag, and top-handle bag.The Manfrotto Advanced Hybrid backpack III is your perfect carry-on travel companion for urban photography.It is all in one bag that can be used as a top-handle bag, a shoulder bag or a backpack. Flexibility is no longer an issue and all needs are catered for. Simply attach or remove the shoulder strap to get the carrying solution needed. Unzip the back to access the backpack’s shoulder straps and you are ready for action.It is designed for both DSLRs and CSCs along with your laptop. It was design with dedicated storage for personal items and photo gear in the main quick access compartment. Its interior can hold a DSLR or mirrorless camera with up to 2 lenses.The padded camera compartment features the brand-new Manfrotto M-Guard™ Protection System. Made of special high-density EVA foam, it provides exceptional shock absorbing response with a super slim profile. The customizable folding patterns allow maximum versatility to fully protect camera gear while maximizing the use of space.There is plenty of space for your personal belongings as well, including a separate laptop compartment which can hold a 14 inch laptop. By simply removing the internal camera pouch, it instantly becomes a travel daypack or daybag. The durable side strap accomodates for your small tripod such as a Befree Advanced series tripod. The padded shoulder straps also provide maximum carrying comfort and weight distribution.All external fabric are treated making the bag water repellant which can be further reinforced by the supplied raincover in case of adverse weather conditions.

Manfrotto Light Duty Grip Ball Head

LIGHT DUTY GRIP BALL HEAD, 324RC2 (MAN-324RC2, MAN_324RC2, MAN/324RC2, MAN 324RC2) Easy-to-use and transport, the Light Duty Grip Ball Head is an ideal choice for new photographers. Adjust to the perfect angle in a flash for better shooting accuracy. This tripod head is super lightweight and compact so you won't even notice it in your kit bag.Made from durable and reliable aluminium, the Light Duty Grip Ball Head is designed to last. It has an innovative horizontal joystick to help you move around quickly and without hesitation. The lock mechanism comes equipped with friction control so you can be sure everything is tightly in place when you’re in position.This clever piece of equipment features an innovative built-in spirit level, helping you achieve an accurate angle position every single time. The quick release camera plate helps you setup faster. All the tools you need to improve your shots, all in one convenient package.

Manfrotto PL Backloader backpack S

PL Backloader backpack S, MB PL2-BP-BL-S The Manfrotto PRO Light Backloader Camera backpack is a professional camera bag specifically designed to provide unparalleled gear protection and modularity to fit the preference and workflow of any professional photographer or filmmaker. The Pro Light backpacks usher in the all-new M-Guard Protection System specifically designed and laboratory tested to guarantee the highest level of protection and shock resistance especially on areas of the bag where protection is most crucial. M-Guard dividers are made of high-density EVA foam that provides exceptional shock absorption while maintaining a super slim profile. In addition, the SAS-TEC, a viscoelastic memory foam and multi-impact endurance, adds a structural reinforcement on the base of the backpack providing extra shock absorbing properties.The PRO Light Backloader comes with a safe rear access into the camera gear compartment. The Backloader S holds 2-3 full frame mirrorless cameras (no vertical grip attached) on the main compartment plus multiple lenses. Alternatively the internal organization arrangement can be customized to meet different storage needs with the moveable interior panel that split the internal space: the top compartment can be dedicated 30% to personal items and the other 70% dedicated to gear easily accessed from the rear opening.The top access point can also serve as an alternative for reaching into the most used cameras or lenses. It also has front pockets for small items along with a 15 inch laptop compartment. The Backloader features dual side tripod connection for travel sized tripods, an adjustable chest strap, and a DuoFace sun and rain cover that repels moisture and reflects sunlight.The backpack is made of water-repellant RipStop nylon/polyester fabric with reinforcement yarns, duraflex hardware, YKK zippers, hypalon reinforcement, trims and pullers make the pack both ultra-lightweight and strong enough to withstand the most intense use.

Manfrotto 40"X40" CUTTER

40"X40" CUTTER, I1023 (MAN-I1023, MAN_I1023, MAN/I1023, MAN I1023) Cutters and Floppies stop light completely and are used to control or cut illumination sources, whether natural or artificial. They can also be used to protect camera lenses from flare. This cutter is made from black commando fabric and measures 120X120cm.

Manfrotto MAGIC ARM KIT

MAGIC ARM KIT, 143 (MAN-143, MAN_143, MAN/143, MAN 143) Functional and practical, the Magic Arm Kit is an essential part of any photographer’s or content creator’s kit. Made to the highest quality Italian standards, the tough and hard wearing aluminium material makes this all in one solution a highly dependable accessory.Includes (1x) Magic Arm (143N), (1x) Camera/Umbrella Bracket (143BKT), (1x) Super Clamp (035), (1x) Super Clamp.A highlight of this product is its smart centre lever, especially made to lock for all three main movements during your photography and video work. This fast and secure solution gives you assurance that there won't be any unwanted slips or problems when you need to focus on getting that perfect shot.The design of the Magic Arm balances strength with flexibility. Weighing a mere 1.7kg, the Magic Arm can securely hold weights up to 3kg while also extending to a maximum length of 53cm. With reliable features and uncompromised build quality, you can trust this kit to handle the most demanding of photography work.Designed to give you everything you need in one bag, it includes a camera bracket, a super clamp, and a handy backlight base. All in all, this gives you the complete magic photo arm set.Each end of this arm is equipped with a standard-size 16mm spigot which is Anti-Rotation Super Clamp 035 Compatible and features one 1/4” female thread attachment on one side and 3/8” female thread attachment on the other. In addition, the arm is compatible with a whole host of Manfrotto Lighting Accessories such as floor stands, Clamps, Camera Brackets and more. This gives you a fully compatible and functional magic photo arm you may take with you wherever you go. The perfect item of photography equipment to support LED lights, studio lighting and studio equipment, in fact just about anything in or out of the studio needed to be positioned flexibly and securely!

Manfrotto PL Backloader backpack M

PL Backloader backpack M, MB PL2-BP-BL-M The Manfrotto PRO Light Backloader Camera Backpack M is a professional camera bag specifically designed to provide unparalleled gear protection to fit the preference and workflow of any professional photographer or filmmaker.The PRO Light backpacks usher in the all-new M-Guard™ Protection System specifically designed and laboratory tested to guarantee the highest level of protection and shock resistance especially on areas of the bag where protection is most crucial. M-Guard™ dividers are made of high-density EVA foam that provide exceptional shock absorption while maintaining a super slim profile. In addition the SAS-TEC, a viscoelastic memory foam and multi-impact endurance, adds a structural reinforcemnt on the base of the backpack providing extra shock absorbing properties. For an even better worry-free experience, a TSA approved padlock can be used to secure the steel wire puller to close the main compartment.The PRO Light Backloader comes with a safe rear access into a fully padded camera gear compartment with customizable interiors. For full shooting experience, the Backloader M holds 2-3 full frame DSLR or mirrorless cameras with portrait grip on the main compartment plus multiple lenses.Alternatevely the internal organization arrangement can be customized to meet different storage needs thanks to a moveable interior panel that can split the internal space in 2 additional different ways: the top compartment can be dedicated to the 20% to personal items and easily accessed by the quick top opening and the other 80% to gear or interchangeably carry 80% personal items and 20% camera gear.The top access point serves as an alternative for reaching into the most used cameras or lenses. In front is a multi-section compartment both internal end extrenal for small accessories and personal items along with a laptop section that holds a 15” laptop. The Backloader features a double-sided tripod connection for travel sized tripods, an adjustable chest strap for better carrying, and a DuoFace sun and rain cover that repels moisture and reflects sunlight to keep the gear cool and dry all day long.The backpack is made of water-repellant RipStop nylon/polyester fabric with reinforcement yarns to achieve a balance of light weight, unique look, and high capacity performance. Duraflex® hardware, YKK® zippers, hypalon reinforcement, trims and pullers make the pack both ultra-lightweight and strong enough to withstand the most intense use to ensure long-term protection for large amounts of gear.

Manfrotto 48"X48" CUTTER

48"X48" CUTTER, I1024 (MAN-I1024, MAN_I1024, MAN/I1024, I1024) Cutters and Floppies stop light completely and are used to control or cut illumination sources, whether natural or artificial. They can also be used to protect camera lenses from flare. This floppy cutter is made from black commando fabric and measures 120X120cm.

Manfrotto HiLite 1.8m x 2.15m  (6' X 7') Shapers & Masks

HiLite 1.8m x 2.15m  (6' X 7') Shapers & Masks, LL LB8967  (LL_LB8967, LL-LB8967, LL/LB8967, LB8967) The HiLite Shapers & Masks includes three opaque black panels (1x 86cm wide, 2x 66cm wide) that hang on the front of the HiLite background 1.8 x 2.15m LL LB8867 (not included). The shapers allow the photographer maximum control of the width of the strip of light leaving the HiLite softbox. Alternatively, the photographer can split the light into two strips on either side of the shaper panel. Each position offers a different lighting effect on the subject allowing the photographer to be as creative as they wish.This set also includes three optional masks, which attach to the top and the sides of the HiLite. These ensure no light is spilled from the top or the sides of the HiLite giving the photographer complete control especially when shooting in small spaces.The shapers attach to the Hilite very easily. They are supplied with a collapsible aluminium pole that simply clips to the top of the HiLite and the shapers then hang from the pole. To ensure maximum stability two specially designed HiLite sand bags are included which sit over the lower HiLite rods.

Manfrotto C-STAND 18

C-STAND 18, A2018FJCB (MAN-A2018FJCB, MAN_A2018FJCB, MAN/A2018FJCB, MAN A2018FJCB) Turtle base chrome plated steel stand in black with 3 sections and 2 risers.Legs fold flat for easy storage.This stand has a maximum payload of 8kg and maximum height of 1.75m.The stand is also available in chrome plated steel. Legs fold flat for easy storage.The A2018F in chrome steel black is a 20'' 3 section, 2 riser fixed base C-Stand (max height of 1.75m/68.9''). Avenger C-Stands feature captive locking handles that do not vibrate free, use a black paint process that is more durable than powder coating and perform in the most demanding environments. Avenger C-Stands finishes are second to none and provide long lasting durability. They are the most durable in the industry! This Avenger kit will work flawlessly with flags, gobos, floppies, cutters and all types of lighting whether you be on motion picture sets, shooting video or working in photo studios. Recommended accessories: D600CB Boom, D200B, D520LB, G200-1

Manfrotto PL Frontloader backpack M

PL Frontloader backpack M, MB PL2-BP-FL-M (MB-PL2-BP-FL-M, MB_PL2-BP-FL-M, MB/PL2-BP-FL-M, PL2-BP-FL-M) The Manfrotto PRO Light Frontloader camera backpack M is a professional camera bag specifically designed to provide unparalleled gear protection to fit the preference and workflow of any professional photographer or filmmaker.For professional photographers and filmmakers working on assignments, the camera bag that carry and protect their cameras are equally crucial in making the creative process happen. The PRO Light backpacks usher in the all-new M-Guard™ Protection System specifically designed and laboratory tested to guarantee the highest level of protection and shock resistance especially on areas of the bag where protection is most crucial. M-Guard™ dividers are made of high-density EVA foam that provide exceptional shock absorption while maintaining a super slim profile . In addition, the SAS-TEC, a viscoelastic memory foam and multi-impact endurance, adds a structural reinforcement on the base of the backpack provide extra shock absorbing properties. For an even better worry-free experience, a TSA padlock can be used to secure the steel wire puller to close the main compartment.The PRO Light Frontloader offers a fully padded gear compartment with customizable interiors that can be accessed through a front access door. A secondary single side door offers quick access to most used gear that can fit a full frame camera without portrait grip with an attached 70-200mm f/2.8 lens with a service pocket on the interior panel for crucial small accessories. It features a side tripod attachment, a checkpoint friendly 15” laptop compartment, adjustable chest and waist straps, along with a DuoFace sun and rain cover for moisture and heat protection.A compartment with multiple pockets for small accessories is positioned on the front to give you fast access to all your working accessories.This backpack is built to keep professional gear protected while providing optimal comfort even in long periods of carrying . The harness system not only distributes weight evenly from the shoulders to the waist and hips but also maximizes breathability thanks to a contoured EVA mesh panel.The backpack is made of water-repellant RipStop nylon/polyester fabric with reinforcement yarns to achieve a balance of light weight, unique look, and high capacity performance. Duraflex hardware, YKK zippers, hypalon reinforcement, trims and pullers make the pack both ultra-lightweight and strong enough to withstand the most intense use to ensure long-term protection for large amounts of gear. It also conveniently comes with a DuoFace sun/rain cover, which provides extra protection in rough weather and reflects sunlight, keep gear cool and dry all day long.

Manfrotto Advanced Rolling bag III

Advanced Rolling bag III, MB MA3-RB (MB-MA3-RB, MB/MA3-RB, MB_MA3-RB, MA3-RB) The Advanced Camera Rolling bag III is 100% photographic gear bag designed for DSLR and mirrorless cameras able to hold multiple lenses and accessories.This two-wheel rolling bag fits international carry-on size restrictions* and can accommodate a mirrorless camera with 70-200 mm f/4, a second camera body and up to 5-6 lenses. The main full front opening features heavy duty 10mm YKK® zippers while the padded camera compartment features the brand-new Manfrotto M-Guard™ Protection System. Made of special high-density EVA foam, these special dividers provide exceptional shock absorbing response with a super slim profile. The customizable folding patterns allow maximum versatility to fully protect camera gear while maximizing the use of space.In addition, the internal panel is lined see-through pockets to organize small camera accessories, cables, memory cards, etc, as well as a pocket that fits a 15 inch laptop. The bag also features dual side connection straps to carry 2 tripods or even a water bottle. It is equipped with a durable 2-stage retractable handle for better ease of transport. The interior dividers are removable, and converts into a travel luggage with 2 cross straps for storing clothes and personal items.All external fabric are treated making the bag water repellant which can be further reinforced by the supplied raincover in case of adverse weather conditions.*Always check with your airline before flying for their current carry-on requirements. Be aware that overloading the bag will cause it to expand.

Manfrotto Rail 4M (13,2ft) Black

RAIL 4M (13,2FT) BLACK, FF6004B (MAN-FF6004B, MAN_FF6004B, MAN/FF6004B, MAN FF6004B) Anodized rail 4M long.

Manfrotto 48"X48" FLOPPY CUTTER

48"X48" FLOPPY CUTTER, I1031 (MAN-I1031, MAN_I1031, MAN/I1031, MAN I1031) Cutters and Floppies stop light completely and are used to control or cut illumination sources, whether natural or artificial. They can also be used to protect camera lenses from flare. This floppy cutter is made from black commando fabric and measures 120X120cm.

Manfrotto 24"X72" FLOPPY CUTTER

24"X72" FLOPPY CUTTER, I1030 (MAN-I1030, MAN_I1030, MAN/I1030, MAN I1030) Cutters and Floppies stop light completely and are used to control or cut illumination sources, whether natural or artificial. They can also be used to protect camera lenses from flare. This cutter is made from black commando fabric and measures 120X120cm.

Manfrotto Reloader Tough H-55FOAM;Roller

Reloader Tough H-55FOAM;Roller, MB PL-RL-TH55-F (MB_PL-RL-TH55-F, MB-PL-RL-TH55-F, MB/PL-RL-TH55-F, PL-RL-TH55-F) The new PRO Light Reloader Tough H-55 case is designed for travelling professional photographers and videographers. Hermetic, waterproof, and impact resistant, these Tough cases are built to resist to the toughest conditions of use and certified to resist temperatures from °C min -33 / max +90 (°F min -27.4 / max +194 );Built to perfectly protect all types of equipment contents and based on lightweight materials with a secure release latch system. They are IP67 tested meaning that there is no ingress of dust and withstands temporary immersion in water for 30 minutes. Manufactured and designed in Italy, the Tough H-55 is ideal for travellers who do not want to compromise between safety and portability. This case fits airline carry-on size restrictions* and is provided with a two stage telescopic handle with self-locking system to prevent unwanted opening when carrying and transporting, and the automatic pressure release valve provides automatic regulation of the interior air pressure when on a flight. The two wheels have a larger diameter, silent and stable during transport, giving optimal stability, strength, and made to be durable to last over time. The new PRO Light Reloader Tough H-55 is provided with 4 layers of pre-cubed foam and convoluted foam for the lid. The convoluted foam in the lid helps to firmly keep the stored equipment when the case is closed. The 4 layers of pre-cubed foam allows you to customize the insert to your own indsividual equipment and the four layers help for an easier initial setup and arrangement. The Tough H-55 features exclusive design functions that make it compatible with Manfrotto Tough Modular accessories. Four metal pins allow you to easily attach Tough Tripod bag and laptop bag (sold separately) for a more modular carrying experience.*Always check with your airline before flying for their current carry-on requirements.

Manfrotto PL Multiloader backpack M

PL Multiloader backpack M, MB PL2-BP-ML-M (MB-PL2-BP-ML-M, MB_PL2-BP-ML-M, MB/PL2-BP-ML-M, PL2-BP-ML-M) The Manfrotto PRO Light Multiloader camera backpack is a professional camera bag specifically designed to provide unparalleled gear protection to fit the preference and workflow of any professional photographer or filmmaker.For professional photographers and filmmakers working on assignments, the camera bag that carry and protect their cameras are equally crucial in making the creative process happen.The PRO Light backpacks usher in the all-new M-Guard™ Protection System specifically designed and laboratory tested to guarantee the highest level of protection and shock resistance especially on areas of the bag where protection is most crucial. M-Guard™ dividers are made of high-density EVA foam that providing exceptional shock absorption while maintaining a super slim profile. In addition the SAS-TEC, a viscoelastic memory foam and multi-impact endurance, adds a structural reinforcement on the base of the backpack provide extra shock absorbing properties. For an even better worry-free experience, a TSA padlock can be used to secure the steel wire puller to close the main compartment.The PRO Light Multiloader offers 4 points off access for the ultimate carrying flexibility. The main front access door opens into the fully padded camera gear compartment. Two side doors allow for quick access to strategically placed cameras or lenses for a quick gear change, and the top access allows for a quick grab of the most used gear.The Multiloader backpack offers an entirely modular bag that has 3 different carrying configurations. With the use of different combinations of the harness and straps, it can be carried as either a backpack for maximum comfort, a sling bag for speedy lens changing, or as a duffle bag for on-the-go full gear access.It also offers a side attachment that can carry a full-sized tripod (up to the 055 series) and a front attachment that can be split into 2 to carry monopods or small light stands. It also features a checkpoint friendly 15” laptop compartment, adjustable torso height, double chest straps and a padded waist belt for load distribution.This backpack is built to keep professional gear protected while providing optimal comfort even in long periods of carrying. The harness system not only distributes weight evenly from the shoulders to the waist and hips but also maximizes breathability through a contoured EVA mesh panel. The backpack is made of water-repellant Ripstop nylon/polyester fabric with reinforcement yarns to achieve a balance of light weight, unique look, and high capacity performance.Duraflex hardware, YKK zippers, hypalon reinforcement, trims and pullers make the pack both ultra-lightweight and strong enough to withstand the most intense use to ensure long-term protection for large amounts of gear. It also comes with a DuoFace sun/rain cover, which provides extra protection in rough weather and reflects sunlight, keep gear cool and dry all day long.

Manfrotto Chroma Key FX Cover Green

Manfrotto Chroma Key FX Cover Green, MLBG4301CG (MAN-MLBG4301CG, MAN_MLBG4301CG, MAN/MLBG4301CG, MAN MLBG4301CG) The Manfrotto Chroma Key FX Background Cover Green includes: One clip on Chroma Key Green cover only, (frame and carry case not included).The Chroma Key FX Background is Manfrotto’s all in one portable Chroma Key background solution, tailored to most demanding content creators, videographers and cinematographers working on the move.The cover measures 3.9 x 2.8m (12.7 x 9.1ft), With an impressive workable background surface area of 11.2m² (120.5ft²). The Manfrotto Chroma Key FX background is the largest reusable all in one Chroma Key background kit available. The large surface area makes it ideal for use when shooting wide and low camera angles, as well as moving subjects that would otherwise prove unachievable with a smaller surface. The ability to reuse this kit time and time again make it an invaluable asset with a return on investment after just one or two uses when compared to a non-re-usable build.The Chroma Key fabric features a unique and innovative clip system which allows it to be fastened directly onto the frame quickly and easily, creating a smooth and seamless background designed to key out effortlessly. Alternative Green and Blue fabric covers are available separately to provide an alternative keying surface dependant on the scenario or subject, making this invaluable kit adaptable and versatile in many different shoot situations.Available in green and blue. Individual covers are available separately for users who may want to switch between Chroma Key Green and Blue.

Manfrotto Chroma Key FX Cover Blue

Manfrotto Chroma Key FX Cover Blue, MLBG4301CB (MAN-MLBG4301CB, MAN/MLBG4301CB, MAN_MLBG4301CB, MAN MLBG4301CB) The Manfrotto Chroma Key FX Background Cover Blue includes: One clip on Chroma Key Blue cover only, (frame and carry case not included).The Chroma Key FX Background is Manfrotto’s all in one portable Chroma Key background solution, tailored to most demanding content creators, videographers and cinematographers working on the move.The cover measures 3.9 x 2.8m (12.7 x 9.1ft), With an impressive workable background surface area of 11.2m² (120.5ft²). The Manfrotto Chroma Key FX background is the largest reusable all in one Chroma Key background kit available. The large surface area makes it ideal for use when shooting wide and low camera angles, as well as moving subjects that would otherwise prove unachievable with a smaller surface. The ability to reuse this kit time and time again make it an invaluable asset with a return on investment after just one or two uses when compared to a non-re-usable build.The Chroma Key fabric features a unique and innovative clip system which allows it to be fastened directly onto the frame quickly and easily, creating a smooth and seamless background designed to key out effortlessly. Alternative Green and Blue fabric covers are available separately to provide an alternative keying surface dependant on the scenario or subject, making this invaluable kit adaptable and versatile in many different shoot situations.Available in green and blue. Individual covers are available separately for users who may want to switch between Chroma Key Green and Blue.

Manfrotto Reloader Tough H-83 PL; Roller

Reloader Tough H-83 PL; Roller, MB PL-RL-TH83 (MB-PL-RL-TH83, MB/PL-RL-TH83, MB_PL-RL-TH83, PL-RL-TH83) The new PRO Light Reloader Tough H-83 case is designed for travelling professional photographers and videographers. Hermetic, waterproof, and impact resistant, Tough cases are built to resist to the toughest conditions of use and certified to resist temperatures from -33 to 90 °C (-27.4 to 194 °F); Built to perfectly protect all types of equipment contents, they are based on lightweight materials with a secure release latch system. They are IP67 tested meaning that there is no ingress of dust and withstands temporary immersion in water for 30 minutes. Manufactured and designed in Italy, the Tough H-83 is ideal for travellers who do not want to compromise between safety and portability. This case fits checked-in size airline restrictions* and is provided with a 2 stage telescopic handle with self-locking system to prevent unwanted opening when carrying and transporting, and the automatic pressure release valve provides automatic regulation of the interior air pressure when on a flight. The two wheels have a larger diameter, keeping silent and stable during transport, giving optimal stability, strength, and made to be durable to last over time.The Tough H-83 features exclusive design functions that make it compatible with Manfrotto Tough Modular accessories. Six metal pins allow you to easly attach Tough Tripod bag and laptop bag (sold separately) for a more modular carrying experience.*Always check with your airline before flying for their current carry-on requirements.

Manfrotto Telscpic Post Ext.Frm 85-203cm

TELSCPIC POST EXT.FRM 85-203CM, FF3248 (MAN-FF3248, MAN/FF3248, MAN_FF3248, MAN FF3248) A telescopic system for the balanced suspension of loads. Adjustable in height with automatic positioning at the desired position. A female attachment with safety plug and locking lever is fitted at each end. The safety plug has a latch with push-button release latch with push-button release. To adjust the balance of the load, rotate the handle clockwise or counterclockwise. It sustains loads from 1.5kg up to 12kg max.

Manfrotto Video/Movie Prof Trpd Blk

VIDEO/MOVIE PROF TRPD BLK, 117B (MAN-117B, MAN_117B, MAN/117B, MAN 117B) Stainless steel extension legs and extra sturdy leg locks make this the robust choice for video crews around the world. Features built-in spirit level at the shoulder and telescopic mid level spreader. Comes complete with rubber feet and retractable metal spike.

Manfrotto Befree GT Carbon Alpha

BEFREE GT CARBON ALPHA, MKBFRTC4GTA-BH (MKBFRTC4GTA/BH, MKBFRTC4GTA_BH, MKBFRTC4GTA BH, MKBFRTC4GTA) Manfrotto’s Befree GT carbon α professional travel tripod and ball head kit is a special version of the Befree GT Carbon dedicated to all Sony α camera users who want maximum performance and stability in all shooting positions.The plate is designed to match Sony α7 and Sony α9 camera bodies*, to ensure perfect grip, even in the most angled camera shots. The front jut of the plate physically blocks the camera, preventing any play both on tilt and rotational movements, always keeping the camera stuck to the head plate. The result is impressive camera stability, which takes image sharpness to the highest level. The plate is also fully compatible with the world’s most widespread standard head attachments: Manfrotto RC2 and Arca-swiss style. With this aluminium plate fixed to the camera, all Manfrotto heads and almost all tripod heads on the market featuring Arca-style attachments can be set up rapidly and effortlessly, without disassembling components.Befree GT carbon α is dedicated to professional photographers who need superior performance in the most lightweight format. It’s the most professionally advanced solution in Manfrotto’s wide range of Travel Tripods. It is the perfect combination of portability - only 43cm/16.93in when folded - and impressive stability, ensuring flawless and effortless operation even with a 10kg/22.03lbs equipment load. Its ergonomic design makes operating the Manfrotto Befree GT Befree GT carbon α comfortable, fast and secure, enabling even the most demanding photographers to set their equipment up quickly and easily, so their focus stays on catching the perfect shot. The spider is developed to ensure maximum stability on all types of terrain, including the most uneven ones, always keeping the camera completely steady and ready to capture the sharpest images. The spider featured on this innovative model also has an Easy Link, just like Manfrotto’s professional 190 & 055 tripods, allowing photographers to enhance their creativity by adding accessories that make their images unique and unforgettable. If you like, adding lights or reflectors, you can now capture amazing outdoor shots that were previously only achievable with heavy accessorised tripods.It features the M-lock, the new twist lock developed by Manfrotto to satisfy anyone looking for a fast, easy to use, compact solution. Moreover, the M-Lock has no protruding parts and its mechanism closes perfectly around the head, enabling the Befree GT carbon α to slip in and out of its storage pocket effortlessly.Its ergonomic leg-angle selector is designed to be used smoothly by both right and left-handed photographers, enabling everyone to change shooting perspectives intuitively and to find the right tripod setting without losing focus on the shot they want.The Befree GT carbon α can easily be set to three independent leg angle positions, guaranteeing full shooting versatility for all the creative ideas that can emerge outdoors.This tripod is kitted out with Manfrotto’s advanced 496 aluminium Centre ball head (MH496-BH) , a portable yet powerful and intuitive head that allows smooth and precise camera movement. This advanced ball head combines practicality with high performance and features three independent controls that give it the versatility to suit any environment. A main ergonomic knob manages the sphere lock, an integrated friction control knob adjusts the ball tension so that equipment weight is always perfectly balanced and shots framed effortlessly; an independent panoramic knob keeps the horizon flat and moves the camera horizontally, enabling astonishing landscape shots. Framing on the 496 is easier and opens limitless options, so you can pursue any angle you can think of.The head mounts a unique plate that makes it fully compatible with the world’s most widespread standard head attachments: Manfrotto RC2 and Arca-swiss style. With this aluminium plate fixed to the camera, all Manfrotto heads and almost all tripod heads on the market featuring Arca-swiss style attachments can be set up rapidly and effortlessly, with no need for disassembling components.The Befree GT carbon α is the best professional travel tripod for all photographers who want maximum performance both from their tripod and, above all, from their α cameras from Sony. This sturdy yet lightweight travel tripod is the optimal combination of solidity, portability, easy set up and operation. It is built to allow photographers to express their individuality and achieve the most daring and exceptional shots using their camera with the confidence of being supported by a professional solution that will never let them down. * All details of camera’s compatibility are available in the Download section.

Manfrotto Triman Camera Trpd Blk W/O HD

TRIMAN CAMERA TRPD BLK W/O HD, 028B (MAN-028B, MAN/028B, MAN_028B, MAN 028B) The ideal, user-friendly studio tripod. The strong, sturdy and incredibly clever Triman Camera Tripod is packed with innovative features to make each and every shoot a breeze, speeding up you work, and ensuring safe, smooth, and accurate working even when you're under pressure. This stand has a geared column for smooth movements, and a threaded 9.5mm mount on the base of the column for those super-low shots.A twin shank leg design enables you to take straight shots, every single time, as does a handy built-in spirit level. This also helps you to set up faster than ever, with just a quick glance to check you're in perfect position. Not only this, this professional standard studio tripod also has rubber feet with retractable spikes, so you can keep everything steady, regardless of what the shoot entails.Extra standout features include a centre column strut for even greater stability, a mid-level spreader for incredible control, and a handy carry strap, making it an easy-to-transport item of kit. This studio tripod has been especially designed for cameras up to medium-format too, so you have the flexibility to use the kit you need on the day, whether it’s for studio or industrial applications.

Manfrotto AUTOMATIC FOLDING DOLLY

AUTOMATIC FOLDING DOLLY, 181 (MAN-181, MAN/181, MAN_181, MAN 181) Single lever braking system controls all three 80mm wheels. Includes 3/8'' attachment which allows you to fix a head for low angle shooting. It folds legs for transporting and storage.

Manfrotto Automatic Folding Dolly Black

AUTOMATIC FOLDING DOLLY, 181B (MAN-181B, MAN/181B, MAN_181B, MAN 181B) Single lever braking system controls all three 80mm wheels. Includes 3/8'' attachment which allows you to fix a head for low angle shooting. It folds legs for transporting and storage.

Manfrotto VIDEO/MOVIE HEAVY DOLLY

VIDEO/MOVIE HEAVY DOLLY, 114 (MAN-114, MAN/114, MAN_114, MAN 114) Heavy duty, super sturdy dollies are designed for use with large still and video tripods. They feature large 127mm individually braked wheels with cable guards. Folds for transporting.

Manfrotto Triaut Camera Trpd Blk

TRIAUT CAMERA TRPD BLK, 058B (MAN-058B, MAN_058B, MAN 058B, MAN/058B) The versatile, practical and reliable studio tripod. you can't go wrong with the 058B Triaut Camera Tripod. This is a stand built for any situation and any terrain, for serious professionals. Giving you all the scope and control you need to create beautiful pictures regardless of the environment, this stand really is a must-have for any photographer. And it’s made to top quality standards in Italy, so you can be sure it'll stand the test of time.This dynamic studio tripod has plenty of noteworthy features, starting with it's clever automatic leg release system. This allows you to either release one leg to tweak your position, or all three at the same time, so you can work fast and smart. It also has a spirit level built in, for even greater control and speed, meaning you can simply adjust to the precise angle with a glance. And it has built-in telescopic struts, easily activated by a quick release plate. This addition enables you to quickly capture a whole variety of perspectives without any fuss or excess fiddling.Versatile and user-friendly, this stand is ideal for both indoor and outdoor shoots. This is partly helped by it's mid-level spreader and rubber feet with retractable spikes, meaning you can stay completely steady, even on rough terrain. It’s portable too, with it's very own, comfortable carrying strap included. That way, you can move from shoot to shoot without any inconvenience. Simply unstack, hook it over you shoulder, and you're good to go.

Manfrotto Pro Scrim All In One Kit Med

Pro Scrim All In One Kit Med, MLLC1201K (MAN-MLLC1201K, MAN_MLLC1201K, MAN MLLC1201K, MAN/MLLC1201K) The Manfrotto Pro Scrim All In One Kit 1.1x2m Medium includes: 1x lightweight frame, 3x textile covers; (black, double-sided silver/white bounce and 1.25 stop diffuser), 2x grip heads, 2x ears and carry case.The Pro Scrim All In One includes all of the essential components required for creative image makers to take control of their lighting set up by bouncing, diffusing and flagging the light source. They allow the user to master their set up using one compact and easily transportable kit, ideal for demanding professionals who wants to keep their creative options open, whilst remaining as lightweight and portable as possible when working on the move.The kit effortlessly folds down into its own rigid carry case with an impressive compact folded size of just 102 x 24 x 19cm (40.1 x 9.4 x 7.4in) making it extremely transportable.Set up time of this game changing kit takes just minutes thanks to the rapid assembly lightweight aluminium frame featuring an internal elastic cord, ensuring all the framework stays together. The innovative clip on textile covers are another huge time saver, as it allows them to be fastened directly onto the frame quickly and easily. Changing to an alternative textile cover couldn’t be easier, just unclip the attached cover with ease and then attach another straight onto the frame, no time consuming bungee corded assembly required. In addition, the rigid cases zip up internal compartment and Velcro straps keep everything securely in place ready for the next shoot.Another fantastic feature of this kit is the durable cine style ears, fasten them on either side of the frame and then drop them into the chrome steel grip heads. The frame can then be positioned exactly where it is needed when fastened to any pair of sturdy light stands with a 16mm (5/8”) spigot.These extremely versatile light control kits are sure to capture the imagination of today’s creative imagemakers. Their compact form factor, super-fast set up time and innovative design makes it easier than ever to carry essential lighting tools for a range of lighting situations, opening a whole host of creative opportunities.Available in four different sizes; Small 1.1m x 1.1m (3.6 x 3.6ft), Medium 1.1m x 2m (3.6 x 6.5ft), Large 2m x 2m (6.5 x 6.5ft) and Extra Large 2.9m x 2.9m (9.5ft)

Manfrotto Butterfly Pipe Corner Kit

BUTTERFLY PIPE CORNER KIT, H9000 (MAN-H9000, MAN_H9000, MAN/H9000, MAN H9000) This kit, containing corners and supports, provides an easy way of making frames of any dimension, using standard aluminium pipes.

Manfrotto 6X6 MODULAR FRAME

6X6 MODULAR FRAME, H600M (MAN-H600M, MAN_H600M, MAN/H600M, MAN H600M) These heavy duty 3mm square section tubes slot and pin-lock together, rapidly providing a stable frame for lighting control textiles. By reducing or adding tubes you can create any frame size.

Manfrotto Chroma Key FX Background Green

Manfrotto Chroma Key FX Background Green, MLBG4301KG (MAN-MLBG4301KG, MAN/MLBG4301KG, MAN MLBG4301KG, MAN-MLBG4301KG, 4301KG) The Manfrotto Chroma Key FX Background Kit Green includes: Three ultra-fast assembly aluminium frames, one clip on Chroma Key Green cover, four hinge clips, two tensioning bars and one soft carrying bag.The Chroma Key FX Background is Manfrotto’s all in one portable Chroma Key background solution, tailored to most demanding content creators, videographers and cinematographers working on the move.With an impressive overall set up size of 4m (13’1”) wide and 2.9m (9.5’) tall and a workable background surface area of 11.2m² (120.5ft²) (Chroma key fabric cover measures 3.9 x 2.8m (12.7 x 9.1ft), the Manfrotto Chroma Key FX background is the largest reusable all in one Chroma Key background kit available. The large surface area makes it ideal for use when shooting wide and low camera angles, as well as moving subjects that would otherwise prove unachievable with a smaller surface. The ability to reuse this kit time and time again make this kit an invaluable asset with a return on investment after just one or two uses when compared to a non-re-usable build. This portable background kit quickly and effortlessly packs down into a convenient carry bag with a surprisingly compact folded size of just 103cm x 30cm (40.5” x 11.8”) and weighing only 9.8kg (21.6lb) the Chroma Key FX Background is extremely transportable and ideal for working on location.Made up of three rigid but lightweight aluminium framed sections coupled together with four hinge clips, the Chroma Key FX Background can stand up independently by folding in the outer frames to create a wraparound effect or can be leant against a wall to utilise the full width of the system.The frames benefit from an elastic cord running through it which ensures ultra-fast assembly of the frame and prevents any components being misplaced when the kit is packed away. The two included tensioning bars ensure the background is pulled taut and virtually crease free for more accurate keying and reduced post-production time. The entire background kit can be ready to go in just ten minutes meaning users can spend less time building and instead focus on the shoot at hand.The included Chroma Key fabric features a unique and innovative clip system which allows it to be fastened directly onto the frame quickly and easily, creating a smooth and seamless background designed to key out effortlessly. Alternative Green and Blue fabric covers are available separately to provide an alternative keying surface dependant on the scenario or subject, making this invaluable kit adaptable and versatile in many different shoot situations.Available in green and blue. Individual covers are available separately for users who may want to switch between Chroma Key Green and Blue.

Manfrotto Chroma Key FX Background Blue

Manfrotto Chroma Key FX Background Blue, MLBG4301KB (MAN-MLBG4301KB, MAN/MLBG4301KB, MAN_MLBG4301KB, 4301KB) The Manfrotto Chroma Key FX Background Kit Blue includes: Three ultra-fast assembly aluminium frames, one clip on Chroma Key Blue cover, four hinge clips, two tensioning bars and one soft carrying bag.The Chroma Key FX Background is Manfrotto’s all in one portable Chroma Key background solution, tailored to most demanding content creators, videographers and cinematographers working on the move.With an impressive overall set up size of 4m (13’1”) wide and 2.9m (9.5’) tall and a workable background surface area of 11.2m² (120.5ft²) (Chroma key fabric cover measures 3.9 x 2.8m (12.7 x 9.1ft), the Manfrotto Chroma Key FX background is the largest reusable all in one Chroma Key background kit available. The large surface area makes it ideal for use when shooting wide and low camera angles, as well as moving subjects that would otherwise prove unachievable with a smaller surface. The ability to reuse this kit time and time again make this kit an invaluable asset with a return on investment after just one or two uses when compared to a non-re-usable build. This portable background kit quickly and effortlessly packs down into a convenient carry bag with a surprisingly compact folded size of just 103cm x 30cm (40.5” x 11.8”) and weighing only 9.8kg (21.6lb) the Chroma Key FX Background is extremely transportable and ideal for working on location.Made up of three rigid but lightweight aluminium framed sections coupled together with four hinge clips, the Chroma Key FX Background can stand up independently by folding in the outer frames to create a wraparound effect or can be leant against a wall to utilise the full width of the system.The frames benefit from an elastic cord running through it which ensures ultra-fast assembly of the frame and prevents any components being misplaced when the kit is packed away. The two included tensioning bars ensure the background is pulled taut and virtually crease free for more accurate keying and reduced post-production time. The entire background kit can be ready to go in just ten minutes meaning users can spend less time building and instead focus on the shoot at hand.The included Chroma Key fabric features a unique and innovative clip system which allows it to be fastened directly onto the frame quickly and easily, creating a smooth and seamless background designed to key out effortlessly. Alternative Green and Blue fabric covers are available separately to provide an alternative keying surface dependant on the scenario or subject, making this invaluable kit adaptable and versatile in many different shoot situations.Available in green and blue. Individual covers are available separately for users who may want to switch between Chroma Key Green and Blue.

Manfrotto 8X8 Modular Butterfly Frame

8X8 MODULAR BUTTERFLY FRAME, H800M (MAN-H800M, MAN_H800M, MAN/H800M, MAN H800M) These heavy duty 3mm square section tubes slot and pin-lock together, rapidly providing a stable frame for lighting control textiles. By reducing or adding tubes it is possible to create frames of any size.

Manfrotto Fold Away Frame 6"X6"

FOLD AWAY FRAME 6"X6", H2006 (MAN-H2006, MAN_H2006, MAN/H2006, MAN H2006) This unique overhead frame allows rapid fold-out and set-up, ready to mount on stands in seconds. Precisely engineered, the hinged connection points will easily fold to move the frame from set to set or through doorways without having to remove the fabric.

Manfrotto Pro Scrim All In One Kit Large

Pro Scrim All In One Kit Large, MLLC2201K (MAN-MLLC2201K, MAN/MLLC2201K, MAN_MLLC2201K, MAN MLLC2201K) The Manfrotto Pro Scrim All In One Kit 2x2m Large includes: 1x lightweight frame, 3x textile covers; (black, double-sided silver/white bounce and 1.25 stop diffuser), 2x grip heads, 2x ears and carry case.   The Pro Scrim All In One includes all of the essential components required for creative image makers to take control of their lighting set up by bouncing, diffusing and flagging the light source. They allow the user to master their set up using one compact and easily transportable kit, ideal for demanding professionals who wants to keep their creative options open, whilst remaining as lightweight and portable as possible when working on the move.   The kit effortlessly folds down into its own rigid carry case with an impressive compact folded size of just 102 x 24 x 19cm (40.1 x 9.4 x 7.4in) making it extremely transportable.   Set up time of this game changing kit takes just minutes thanks to the rapid assembly lightweight aluminium frame featuring an internal elastic cord, ensuring all the framework stays together. The innovative clip on textile covers are another huge time saver, as it allows them to be fastened directly onto the frame quickly and easily. Changing to an alternative textile cover couldn’t be easier, just unclip the attached cover with ease and then attach another straight onto the frame, no time consuming bungee corded assembly required. In addition, the rigid cases zip up internal compartment and Velcro straps keep everything securely in place ready for the next shoot.   Another fantastic feature of this kit is the durable cine style ears, fasten them on either side of the frame and then drop them into the chrome steel grip heads. The frame can then be positioned exactly where it is needed when fastened to any pair of sturdy light stands with a 16mm (5/8”) spigot.   These extremely versatile light control kits are sure to capture the imagination of today’s creative imagemakers. Their compact form factor, super-fast set up time and innovative design makes it easier than ever to carry essential lighting tools for a range of lighting situations, opening a whole host of creative opportunities.   Available in four different sizes; Small 1.1m x 1.1m (3.6 x 3.6ft), Medium 1.1m x 2m (3.6 x 6.5ft), Large 2m x 2m (6.5 x 6.5ft) and Extra Large 2.9m x 2.9m (9.5ft)

Manfrotto Fold Away Frame 8"X8"

FOLD AWAY FRAME 8"X8", H2008 (MAN_H2008, MAN-H2008, MAN/H2008, MAN H2008) This unique overhead frame allows rapid fold-out and set-up, ready to mount on stands in seconds. Precisely engineered, the hinged connection points will easily fold to get the frame from set to set or through doorways without having to remove the fabric.

Manfrotto Pro Scrim All In One Kit XL

Pro Scrim All In One Kit XL, MLLC3301K (MAN-MLLC3301K, MAN MLLC3301K, MAN_MLLC3301K, MAN/MLLC3301K, 3301K) The Manfrotto Pro Scrim All In One Kit 2.9x2.9m Extra Large includes: 1x lightweight frame, 2x textile covers; (black and 1.25 stop diffuser), 2x grip heads, 2x ears and carry case.   The Pro Scrim All In One includes all of the essential components required for creative image makers to take control of their lighting set up by diffusing and flagging the light source. They allow the user to master their set up using one compact and easily transportable kit, ideal for demanding professionals who wants to keep their creative options open, whilst remaining as lightweight and portable as possible when working on the move.   The kit effortlessly folds down into its own rigid carry case with an impressive compact folded size of just 102 x 24 x 19cm (40.1 x 9.4 x 7.4in) making it extremely transportable.   Set up time of this game changing kit takes just minutes thanks to the rapid assembly lightweight aluminium frame featuring an internal elastic cord, ensuring all the framework stays together. The innovative clip on textile covers are another huge time saver, as it allows them to be fastened directly onto the frame quickly and easily. Changing to an alternative textile cover couldn’t be easier, just unclip the attached cover with ease and then attach another straight onto the frame, no time consuming bungee corded assembly required. In addition, the rigid cases zip up internal compartment and Velcro straps keep everything securely in place ready for the next shoot.   Another fantastic feature of this kit is the durable cine style ears, fasten them on either side of the frame and then drop them into the chrome steel grip heads. The frame can then be positioned exactly where it is needed when fastened to any pair of sturdy light stands with a 16mm (5/8”) spigot.   These extremely versatile light control kits are sure to capture the imagination of today’s creative imagemakers. Their compact form factor, super-fast set up time and innovative design makes it easier than ever to carry essential lighting tools for a range of lighting situations, opening a whole host of creative opportunities.   Available in four different sizes; Small 1.1m x 1.1m (3.6 x 3.6ft), Medium 1.1m x 2m (3.6 x 6.5ft), Large 2m x 2m (6.5 x 6.5ft) and Extra Large 2.9m x 2.9m (9.5ft)

Manfrotto CF 3-Stage Video Tripod,75/100

CF 3-STAGE VIDEO TRIPOD,75/100, 536 (MA-536, MA/536, MA_536, MA 536) Super sturdy, compact and with an impressive reach. Our ingenious MPRO Carbon Fibre 3-Stage Video Tripod ticks all the boxes for professionals looking for a reliable, versatile, and capable tripod. Thanks to its four section design, you can easily set up, and disassemble in a flash, so you’ll never waste time on a shoot.   Among its many superior design features are its noteworthy height capabilities. Reaching from 26cms to 203cms, you won’t be hampered when it comes to getting the shot you need. Ergonomic as well as flexible, a 100mm bowl gives you great control when levelling your equipment. And it has a leg angle selector. That means you can adjust the legs quickly and precisely.   It comes with screw-in 75/100mm adapter. So you’ll be ready to go with any industry standard half ball heads.

Manfrotto F1200 Column Arm and Tree Lighting Support

Manfrotto F1200 (MAN-F1200, MAN/F1200, MAN_F1200, MANF1200, f1200) Column Arm and Tree Lighting Support This column arm has both a 16mm spigot and a 28mm bushing. It is 51cm (20 in) long and is secured to a column by means of 2 straps (supplied).

Manfrotto E710 Junior Drop Down Pin

Manfrotto E710 (MAN-E710, MAN/E710, MAN_E710, MANE710, e710) Junior Drop Down Pin This Avenger E710 Junior Drop Down Pin is used on the end of a boom arm to maintain a constant downward angle of a mounted light fixture as the angle of the boom arm is changed. It mounts with a 1 1/8 inch pin and ends in a combo 1 1/8" receiver and 5/8" pin.

Manfrotto D800KIT Grip Kit

Manfrotto D800KIT (MAN-D800KIT, MAN/D800KIT, MAND800KIT, MAN_D800KIT, d800kit) Grip Kit Set of accessories that work on their own or in combination with stands to support scrims, flags and lighting fixtures to provide precision and secure control. Kit comprises of: D200B Black grip head. E600 Snap-in 16mm pin. D520B Black 40'' extension arm.

Manfrotto D750 Telescopic Polyholder

Manfrotto D750 (MAN-D750, MAN/D750, MAN_D750, MAND750, man_d750) Telescopic Polyholder This telescopic polystyrene holder can extend from 91cm to 156cm (from 35 to 61 in) . Polystyrene is the most widely used light bouncer but is not the easiest to handle, this holder grips any thickness.

Manfrotto D650 Junior Boom Arm with Counterweight

Manfrotto D650 (MAN-D650, MAN/D650, MAN_D650, MAND650, d650) Junior Boom Arm with Counterweight Boom arms allow you to position your lights to reach the most difficult positions. This junior boom arm can support a payload up to 40kg and extends up to 3m. It also includes a strong steel counterweight for smooth operation and stability.

Manfrotto D600CB Mini Boom Arm With Sliding Attachment Black

Manfrotto D600CB (MAN-D600CB, MAN/D600CB, MAN_D600CB, MAND600CB, d600cb) Mini Boom Arm With Sliding Attachment Black This mini boom arm in black chrome finish extends from 117cm to 212cm. It allows you to position your lights in the most difficult angles. Strong steel counterweight allows for smooth operation and stability. It is also provided with a hook for the counterweight and features a 16mm male attachment.

Manfrotto D570 Extension Arm with Swivel 16mm Pin

Manfrotto D570 (MAN-D570, MAN/D570, MAN_D570, MAND570, d570) Extension Arm with Swivel 16mm Pin This chrome plated steel arm is a 91cm extension arm with a swiveling 16mm pin. The arm includes a grip head to mount it on stand with a female 16mm attachment.

Manfrotto D530L 40'' Extension Grip Arm and Grip Head

Manfrotto D530L (MAN-D530L, MAN/D530L, MAN_D530L, d530l) 40'' Extension Grip Arm and Grip Head This chrome plated steel arm i it provides an extended grip point for scrims and flags or small lights. Pipe length is 102cm. It includes a D200 grip head. Also available in black.

Manfrotto D390 Universal Flextension Kit

Manfrotto D390 (MAN-D390, MAN/D390, MAN_D390, MAND390, MAN D390, man_d390) Universal Flextension Kit The D390 Universal Flextension Kit allows you to mount the flex arm to the camera and use the flag as a lens shade to eliminate flare.

Manfrotto D340 Camera Flextension Kit

Manfrotto D340 (MAN-D340, MAN/D340, MAN_D340, MAND340, d340) Camera Flextension Kit Use the D340 Flextension Kit with Flag as a lens shade by mounting it on a Super Clamp or light stand. This kit includes a 3/8" adapter for smaller stand tops.

Manfrotto D250 GAG GOBO Silver Double Grip Head

Manfrotto D250 (MAN-D250, MAN/D250, MAN_D250, MAND250, man_d250) GAG GOBO Silver Double Grip Head This double grip head is a very flexible tool that allows different uses for example doubling up scrims and flags.

Manfrotto D244N Variable Friction Arm

Manfrotto D244N (MAN-D244N, MAN/D244N, MAN_D244N, MAND244N, man_d244n) Variable Friction Arm The Avenger Variable Friction Arm is a fully articulated accessory with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360° using a rubberized T-handle. The handle allows tension control via partial loosening for safe and precise positioning of a light head or camera. The arm It has 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads. The arm is compatible with the wide variety of gripware available with 5/8" receivers.

Manfrotto D220 Baby Grip Helper

Manfrotto D220 (MAN-D220, MAN/D220, MAN_D220, MAND220, MAN D220, man_d220) Baby Grip Helper Just as the name suggests, the Grip Helper is like three Grip Heads in one. Two independent grip heads sandwich a third with a fixed 16mm pin. This system allows multiple light control accessories to mount in front of fixtures without the need for extra light stands. The Grip Helper is constructed of polished aluminum alloy and weighs 2.43 lb.

Manfrotto D210JB Snap In Grip Head Black 5mm Female

Manfrotto D210JB (MAN-D210JB, MAN/D210JB, MAN_D210JB, MAND210JB, MAN D210JB, man_d210jb) Snap In Grip Head Black 5mm Female Avenger's most popular grip accessory. The D210JB grip head has hundreds of functions. Unlike any other grip head, it utilises a series of washers for extra locking torque and the use of automotive-quality brake pad discs for secure, non-slip security. This version connect has a 17,5mm female attachemnt. You can connect it with additional E600 snap-in pin or E600C steel version to attach it to the original Super Clamp.

Manfrotto D100 Double Grip Head

Manfrotto D100 (MAN-D100, MAN/D100, MAN_D100, MAN D100, man_d100) Double Grip Head The Avenger D100 Double Grip Head is a combination of two joined 2.5" grip heads, mounted on a steel plate with a 3/8" (10mm) diameter rod. The D100 allows mounting of double the amount of light modifiers as the standard head.

Manfrotto C888UH Triple Telescopic Hanger with Universal Head

Manfrotto C888UH (MAN-C888UH, MAN/C888UH, MAN_C888UH, MAN C888UH, man_c888uh) Triple Telescopic Hanger with Universal Head Avenger triple telescopic hanger with universal head is a chrome-plated steel single riser with an integrated universal head that can support lights overhead. It can hold a payload up to 40kg depending on the attachment used. Can extend up to 1.61m. Attachment types are: 16mm male and 28mm female.

Manfrotto C827 Long Telescopic Hanger With Universal Head

Manfrotto C827 (MAN-C827, MAN/C827, MAN_C827, MANC827, man_c827) Long Telescopic Hanger With Universal Head Avenger long telescopic hanger with universal head is a chrome-plated steel single riser with an integrated universal head that can support lights overhead. It can hold a payload up to 40kg depending on the attachment used. Can extend up to 3.81m. Attachment types are: 16mm male and 28mm female.

Manfrotto C822 Long Telescopic Hanger With Stirrup

Manfrotto C822 (MAN-C822, MAN/C822, MAN_C822, MAN C822, c822) Long Telescopic Hanger With Stirrup This long telescopic hanger is designed in strong steel making it ideal for light attachments or suspending fixtures. It can support up to 40kg and extends up to 3.79m. It also includes a stirrup.

Manfrotto C820 Telescopic Hanger With Stirrup

Manfrotto C820 (MAN-C820, MAN/C820, MAN_C820, MAN C820, c820) Telescopic Hanger With Stirrup This telescopic hanger is designed in strong steel making it ideal for light attachments or suspending fixtures. It can support up to 40kg and extends up to 1.97m. It also includes a stirrup. It includes a safety pin.

Manfrotto C626 Long Steel Stand Extension

Manfrotto C626 (MAN-C626, MAN/C626, MAN_C626, MAN C626, c626) Long Steel Stand Extension Chrome-plated Steel Construction, 1 1/8" Junior Male to 1 1/8" Junior Female, 5/8" Baby Pin

Manfrotto C624 Universal Head Extension Medium

Manfrotto C624 (MAN-C624, MAN/C624, MAN_C624, MAN C624, c624) Universal Head Extension Medium Chrome-plated Steel Construction, 1 1/8" Junior Male to 1 1/8" Junior Female, 5/8" Baby Pin

Manfrotto C622 Universal Head Extension Small

Manfrotto C622 (MAN-C622, MAN/C622, MAN_C622, MAN C622, c622) Universal Head Extension Small The Avenger C622 Small Universal Head Extension allows you to add a riser, Junior stand extension or offset arm to a Junior light stand (1 1/8" female). A 5/8" pin is also built into the C622 to add a Baby (5/8") extension or to provide a 5/8" pin for Junior stands without universal heads.

Manfrotto C590 Conka Bonka Stand Extensions

Manfrotto C590 (MAN-C590, MAN/C590, MAN_C590, MAN C590, c590) Conka Bonka Stand Extensions This is a chrome-plated Avenger/Manfrotto C590 Conka Bonka Stand Extension Kit . This three piece kit can be used to extend the height or reach of a cine-stand or boom. Each extension is fitted with a junior stud on one end, and a locking junior receptor on the other. Their respective lengths are: 26.6"/67.5cm, 10.6"/27cm, 6.0"/15cm.

Manfrotto C4486 MP Eye Coupler Swivel Tilt 200

Manfrotto C4486 (MAN-C4486, MAN/C4486, MAN_C4486, MANC4486, c4486) MP Eye Coupler Swivel Tilt 200 The Manfrotto C4486 MP Eye Coupler Swivel Tilt 200 truss support is equipped with a tilting mechanism which avoids torsion problems caused by lifting a truss using two stands simultaneously. The base expands from approximately 8 - 16".

Manfrotto C4485 MP Eye Coupler Swivel Tilt 150

Manfrotto C4485 (MAN-C4485, MAN/C4485, MAN_C4485, MANC4485, c4485) MP Eye Coupler Swivel Tilt 150 The Manfrotto C4485 MP Eye Coupler Swivel Tilt 150 truss support is equipped with a tilting mechanism which avoids torsion problems caused by lifting a truss using two stands simultaneously. The base expands from approximately 6 - 10".

Manfrotto C339UH Grab Clamp W/Universal Head

Manfrotto C339UH (MAN-C339UH, MANC339UH, MAN_C339UH, man-c339UH) Grab Clamp W/Universal Head. Grab clamp with universal head. Grab clamp provided with a universal fixed (non-rotating) head.  

Manfrotto C339BB Grab Clamp with 5/8" Baby Bushing

Manfrotto C339BB (MAN-C339BB, MANC339BB, MAN_C339BB, man-c339BB) Grab Clamp with 5/8" Baby Bushing. Similar to the C339, the C339BB comes with a 5/8" bushing complete with push button for extra-safe attachment. The C339BB is flexible and fast to use due to its pincer jaw design and rapid lock and release mechanism. It can be fixed to a wide range of supports than traditional clamps and is suitable for use in television, video, photographic studios, theatres and rigging structures. The Grab Clamp will hold all kinds of lights, scenery, monitors and much more. The Grab Clamp has been designed to be mounted on a wide range of beams, pipes and bars, whether round, square, or rectangular in section. It needs no adapter - just open and clamp it!

Manfrotto C339SP Grab Clamp with 100mm Spinning Pulley

Manfrotto C339SP (MAN-C339SP, MANC339SP, MAN_C339SP, man-c339SP)Grab Clamp with 100mm Spinning Pulley. The C339SP is fitted with a 100mm diameter pulley to offer a quick and robust hanging point for TV and theatre sceneries. The grab clamp has been designed to be mounted on a wide range of beams, pipes and bars, whether round, square, or rectangular in section. It needs no adapter - just open and clamp it. Fast and easy to use due to its pincer jaw design and rapid lock and release mechanism, the C339SP can be fixed to a wide range of supports than traditional clamps, and is suitable for use in television, video, photographic studios, theatres and rigging structures.

Manfrotto C339 Grab Clamp

Manfrotto C339 (MAN-C339, MANC338, MAN_C338, man-c338) Grab Clamp. Grab clamp supplied with a 12.5 mm not threaded hole for custom fixings.

Manfrotto C338 Quick Action Baby Clamp

Manfrotto C338 (MAN-C338, MAN/C338, MAN_C338, MANC338, man_c338) Quick Action Baby Clamp This slim and lightweight aluminium clamp is ideal to hang all types of luminaries.It features a T handle and in order to meet all safety requirements the clamp has also been designed with a dedicated slot for flexible steel safety cables. Pipe size 20-52mm.

Manfrotto C337 Quick Action Junior Clamp with T-Knob

Manfrotto C337 (MAN-C337, MAN/C337, MAN_C337, MANC337, man_c337) Quick Action Junior Clamp with T-Knob The Avenger C337 Quick Action Junior Clamp with 28mm Receiver is the perfect partner for lights with a 28mm Junior Spigot and 28mm pins. Designed with a unique fast quick action mechanism which locks down the clamp quickly, followed by minor adjustments using the rubber covered T-Handle. Made in gravity cast aluminium, this clamp is ideal to hang all types of lights and luminaires in TV studios and theatres. Its incredible ''coupling range'' means it can clamp onto most industry standard pipe diameters (Pipes ranging from 40-70mm). To meet all safety requirements, the Avenger C337 has been designed with a dedicated slot for flexible steel safety cables, has a built in safety pin to secure the load or adapters mounted into this clamp. T-Top rubber T-Handle cover included to improve grip. This clamp is TÜV certified. Recommended Accessories: E200, C155, D400, C626

Manfrotto B9005R Ratchet Handle for Strato Safe Stand

Manfrotto B9005R (MAN-B9005R, MAN/B9005R, MAN_B9005R, MANB9005R, man_b9005r) Ratchet Handle for Strato Safe Stand This Avenger B9005R Ratchet Handle for the Strato Safe Stand is a replacement handle with a sure-grip vinyl-rubber handle end that snaps and locks into position. Its ratcheting action allows you to reposition the handle or make a series of small cranking adjustments in tight situations where a full 360-degree turn is not possible.

Manfrotto B9000P Rubber Filled Wheel Set For Strato Safe

Manfrotto B9000P (MAN-B9000P, MAN/B9000P, MAN_B9000P, MANB9000P, man_b9000p) Rubber Filled Wheel Set For Strato Safe Set of 3 Rubber Filled for strato safe stands. Supplied with double brake mechanism that can lock wheels and pivot separately. Pivoting mechanism has 12 locking positions

Manfrotto B9000 Hard Wheel Set For Strato Safe

Manfrotto B9000 (MAN-B9000, MAN/B9000, MAN_B9000, MANB9000, man_b9000) Hard Wheel Set For Strato Safe Set of three wheels for Strato Safe Stands, it is supplied with double-brake mechanism that can lock wheel and pivot separately.

Manfrotto B70XXFFW Foam Fill Wheels For Long John Silver

Manfrotto B70XXFFW (MAN-B70XXFFW, MAN/B70XXFFW, MAN_B70XXFFW, MANB70XXFFW, b70xxffw) Foam Fill Wheels For Long John Silver Set of 3 foam fill wheels for use with the Long John Silver and Strato Safe Stand. Providing a smooth movement on a variety of surface types.

Manfrotto B7043CS-1 Strato Safe Stand 3 Riser w/Braked Wheels

Manfrotto B7043CS-1 (MAN-B7043CS-1, MAN/B7043CS/1, MAN_B7043CS_1, MANB7043CS1, b7043cs-1) Strato Safe Stand 3 Riser w/Braked Wheels The Avenger B7043CS-1 Flat Jumper Strato Safe Stand 43 is built in chrome steel and gravity cast aluminum, comprising of 3 risers and 4 sections. This stand surpasses industry requirements for safe operation and is part of the Strato Safe family that can lift heavy loads up to 70kg/154lbs. Each section uses a uniquely designed gear box that uses a ratchet crank handle to safely raise each riser into place. The ratchet crank handle can conveniently be stored to the top casting of the stand and is always available when needed. Braked rubber wheels are sold with this stand and allow for easy moving in studio and other smooth and semi-smooth surfaces. This stand comes with a 087WBK wind brace kit for extra securing of the load when required. Other wheel options are available if required. (B9000P). Avenger works hard to develop and certify gear for different markets! The B7043CS-1 along with being TÜV rated is also CE certified and has a CE declaration. Don't settle for copies that try to emulate this TÜV and CE certified stand.

Manfrotto B150P-1 Strato Safe Stand 4 Riser

Manfrotto B150P-1 (B150P/1, B150P_1, B150P1, B150P 1, b150p-1) Strato Safe Stand 4 Riser The Avenger B150P-1 Strato Safe Crank Up Stand is a beast of a stand with exceptional performance and uses rubber filled wheels (B9000P) for better movement over different types of terrain. This stand has a humorous industry nickname and it is used commonly by grips and gaffers worldwide. It is built in Chrome Steel and Gravity Cast aluminium, comprising of 4 Risers and 5 sections. This stand surpasses industry requirements for safe operation and is part of the Strato Safe family that can lift heavy loads up to 220lbs./100kg. Each section uses a uniquely designed gear box that uses a ratchet crank handle to safely raise each riser into place. The ratchet crank handle can conveniently be stored to the top casting of the stand and is always available when needed. Hard Rubber braked wheels are sold with this stand and allow for easy moving in studio and across many different surfaces. This stand comes with a 087WBK wind brace kit for extra securing of the load when required. Avenger works hard to develop and certify gear for different markets! The B150P-1 along with being TÜV rated is also CE certified and has a CE declaration. Don't settle for copies that try to emulate this TÜV and CE certified stand.

Manfrotto AVCSA1301B Triple C Roller Case

Manfrotto AVCSA1301B (MAN-AVCSA1301B, MAN/AVCSA1301B, MANAVCSA1301B, MAN_AVCSA1301B, man_avcsa1301b) Triple C Roller Case This ultra-tough, hardwearing case is designed and built for the professional imagemaker working on location. It allows them to transport all their essential C-Stand accessories in one convenient carrying solution, ensuring everything is easily accessible and close to hand when arriving at a shoot. With its external dimensions of 128cm x 28cm x 40cm (50.4in x 11in x 15.7in) this roller case has plenty of storage capacity and can carry up to a maximum load of 35kg (77.1lbs). Tailored for carrying up to three turtle base (detachable) C-Stand kits and accessories, the spacious main compartment features high-density closed cell and cross link foam dividers to create three sections for detachable C-Stand columns and a fourth section with adjustable reinforced straps to securely stow extension arms. Includes two removable padded storage trays, ideal for grip heads, clamps and other small accessories, keeping equipment safe and secure. Up to three C-Stand turtle bases can be neatly stored by securely fastening them to the inner lid dividers using the adjustable quick release webbing straps, keeping them separate from the rest of the gear and making it easy to access the right components quickly. The large internal zip pocket is ideal for foldable light controls such as flags and scrims, this pocket can be split into two using the Velcro fastening and features a viewing window making it easy to find even the smallest accessory. The shell of this rugged case is constructed from hard ABS honeycomb and durable water-resistant 900D Polyester, with high quality YKK® RC zippers with moulded grip pull cords throughout. It also features strong anti-abrasion protective reinforcement in key high wear areas, as well as durable rubber feet, bumpers and back rails to further protect the case when navigating uneven terrain and obstacles. The strong exterior padded handles on the top and side panels and replaceable shock-absorbing wheels allow for both single and two-person handling for ease of manoeuvrability on location. Two large zip pockets which help to keep essential tools and accessories easily available and a convenient luggage tag holder allows for clear identification. All of these features combined with the black finish, Avenger blue detailing, bold branding and crafted design make this all in one carrying solution stylish as well as functional. The perfect carrying solution allowing the creative imagemaker to arrive on set ready to roll!

Manfrotto A9000NB Wheel Set with Brakes (Black)

Manfrotto A9000NB (MAN-A9000NB, MAN/A9000NB, MAN_A9000NB, MANA9000NB, man_a9000nb) Wheel Set with Brakes (Black) This set of 3 braked wheels are Ø:100mm and are ideal for 20 x 20 and 25 x 25mm square legs to accessorise stands.

Manfrotto A9000N Wheel Set with Brakes (Silver)

Manfrotto A9000N (MAN-A9000N, MAN/A9000N, MAN_A9000N, MANA9000N, man_a9000n) Wheel Set with Brakes (Silver) This set of 3 braked wheels are Ø:100mm and are ideal for 20 x 20 and 25 x 25mm square legs to accessorise stands.

Manfrotto A5043 Roller Stand 43 with Low Base

Manfrotto A5043 (MAN-A5043, MAN/A5043, MAN_A5043, MANA5043, man_a5043) Roller Stand 43 with Low Base This Avenger roller stand with 4 sections and 3 risers features steel legs and column, and risers in aluminium. It can support a payload up to 12kg and can reach a maximum height of 4.30m. It features wheels for easy transportation and a low base for extra stability.

Manfrotto A5033 Roller Stand 33 with Folding Base

Manfrotto A5033 (MAN-A5033, MAN/A5033, MAN_A5033, MANA5033, man_a5033) Roller Stand 33 with Folding Base This Avenger roller stand with 4 sections and 3 risers features steel legs and column, and risers in aluminium. It can support a payload up to 12kg and it can reach a maximum height of 3.30m. It features wheels for easy transportation and its legs fold up for better storage.

Manfrotto A5029 Roller Stand 29 with Low Base

Manfrotto A5029 (MAN-A5029, MAN/A5029, MAN_A5029, MANA5029, man_a5029) Roller Stand 29 with Low Base This Avenger roller stand with 3 sections and 2 risers features steel legs and column, and risers in aluminium. It can support a payload up to 12kg and can reach a maximum height of 2.90m. It features wheels for easy transportation and a low base for extra stability.

Manfrotto A4041B Boom Stand 41 Aluminium Black

Manfrotto A4041B (MAN-A4041B, MAN/A4041B, MAN_A4041B, MANA4041B, man_a4041b) Boom Stand 41 Aluminium Black The Avenger boom stand 41 is a black aluminium stand with 4 sections and 3 risers. The stand is supplied with a sandbag counterweight(empty) for maximum stability. It can support a maximum payload of 10kg and can reach a maximum height of 4.13m. It also features 1 levelling leg for easy use on uneven surfaces.

Manfrotto A4039CS Boom Stand 39 Steel

Manfrotto A4039CS (MAN-A4039CS, MAN/A4039CS, MAN_A4039CS, MANA4039CS, man_a4039cs) Boom Stand 39 Steel The Avenger boom stand 39 is a steel stand with 4 sections and 3 risers. The stand is supplied with a sandbag counterweight (empty) for maximum stability. It can support a maximum payload of 12kg and can reach a maximum height of 3.92m. It also features 1 levelling leg for easy use on uneven surfaces.

Manfrotto A3065CS Overhead Stand 65 Steel With Wide Base

Manfrotto A3065CS (MAN-A3065CS, MAN/A3065CS, MAN_A3065CS, MANA3065CS, man_a3065cs) Overhead Stand 65 Steel With Wide Base These overhead stands have been designed with a built-in grip head for supporting poles, tubes and overhead frames. This chrome steel stand has 5 sections and 4 risers. It features 2 levelling legs for use on uneven terrain. This stand can support a maximum payload of 30kg and can reach a maximum height of 6.38m.

Manfrotto A3059CS Overhead Stand 58 Steel with Braked Wheels

Manfrotto A3059CS (MAN-A3059CS, MAN/A3059CS, MAN_A3059CS, MANA3059CS, man_a3059cs) Overhead Stand 58 Steel with Braked Wheels These overhead stands have been designed with a built-in grip head to use supporting poles, tubes and overhead frames. This chrome steel stand has 4 sections and 3 risers. It also features braked wheels for easy transport. This stand can support a maximum payload of 40kg and can reach a maximum height of 5.78m.

Manfrotto A3056CS Overhead Steel Stand 56 Steel with Wide Base

Manfrotto A3056CS (MAN-A3056CS, MAN/A3056CS, MAN_A3056CS, MANA3056CS, man_a3056cs) Overhead Steel Stand 56 Steel with Wide Base The overhead stands have been designed with a built-in grip head for supporting poles, tubes and overhead frames. This chrome steel stand has 4 sections and 3 risers. It features 1 levelling leg so you can even use the stand on rough terrain. It's also compatible with braked wheels A9000N. This stand can support a maximum payload of 40kg and can reach a maximum height of 5.57m.

Manfrotto A3043CS Overhead Stand 43 Steel With Braked Wheels

Manfrotto A3043CS (MAN-A3043CS, MAN/A3043CS, MAN_A3043CS, MANA3043CS, man_a3043cs) Overhead Stand 43 Steel With Braked Wheels The overhead stands have been designed with a built-in grip head for easy use with supporting poles, tubes and overhead frames. This chrome steel stand has 4 sections and 3 risers. It features braked wheels for easy transport. This stand can support a maximum payload of 40kg and can reach a maximum height of 4.32m.

Manfrotto A3042CS Overhead Stand 42 Steel

Manfrotto A3042CS (MAN-A3042CS, MAN/A3042CS, MAN_A3042CS, MANA3042CS, man_a3042cs) Overhead Stand 42 Steel These overhead stands have been designed with a built-in grip head to use supporting poles, tubes and overhead frames. This chrome steel stand has 4 sections and 3 risers. It can support a maximum payload of 40kg and can reach a maximum height of 4.23m.

Manfrotto A2033LKIT C-Stand Kit 33 With Sliding Leg

Manfrotto A2033LKIT (MAN-A2033LKIT, MAN/A2033LKIT, MAN_A2033LKIT, MANA2033LKIT, man_a2033lkit) C-Stand Kit 33 With Sliding Leg This kit includes a turtle base chrome plated steel stand (code A2033L) with 3 sections and 2 risers. It also includes D200grip head and D520 40'' (124cm) extension arm that provides extended grip point for scrim, flags and small lights. It features one sliding leg to keep the stand steady on uneven surfaces. This stand has a maximum payload of 10kg and maximum height of 3.28m.

Manfrotto A2033LJ C-Stand 33 With Sliding Leg

Manfrotto A2033LJ (MAN-A2033LJ, MAN/A2033LJ, MAN_A2033LJ, MANA2033LJ, man_a2033lj) C-Stand 33 With Sliding Leg Turtle base chrome plated steel stand with 3 sections and 2 risers. It features one sliding leg to keep the stand steady on uneven surfaces. This stand has a maximum payload of 10kg and maximum height of 3.28m. The stand is also available in a black finish version. This stand features a female top attachemnet of 17,5mm.

Manfrotto A2030DKIT Turtle Base C-Stand Grip Arm Kit

Manfrotto A2030DKIT (MAN-A2030DKIT, MAN/A2030DKIT, MAN_A2030DKIT, MANA2030DKIT, man-a2030dkit) Turtle Base C-Stand Grip Arm Kit The A2030DKIT in silver comes complete with the A2030D 40'' 3 Section, 2 riser Turtle Base Chrome Steel C-Stand (max height of 3m/118'') a D200 2 1/2in grip head and a 40'' D520 Grip Arm. Avenger C-Stands feature captive locking handles that do not vibrate free are triple chrome plated and perform in the most demanding environments. Couple this with the unbeatable braking power of the D200 grip head and D520 grip arm, this Avenger kit will work flawlessly with gobos, floppies, cutters and all types of lighting whether you be on motion picture sets, shooting video or working in photo studios.

Manfrotto A2025LCB C-Stand 25 With Sliding Leg

Manfrotto A2025LCB (MAN-A2025LCB, MAN/A2025LCB, MAN_A2025LCB, MANA2025LCB, man_a2025lcb) C-Stand 25 With Sliding Leg Turtle base chrome plated steel stand in black finish with 3 sections and 2 risers. Legs folds flat for easy storage. This stand has a maximum payload of 10kg and maximum height of 3.28m. It features one sliding leg for easy use on uneven surfaces. The stand is also available in chrome plated steel.

Manfrotto A2020 C-Stand Column 20

Manfrotto A2020 (MAN-A2020, MAN/A2020, MAN_A2020, MANA2020, man_a2020) C-Stand Column 20 Chrome steel three sections column with 16mm female top attachment and 28mm female bottom receiver

Manfrotto A2018LJCB C-Stand 18 Sliding Leg

Manfrotto A2018LJCB (MAN-A2018LJCB, MAN/A2018LJCB, MAN_A2018LJCB, MANA2018LJCB, man_a2018ljcb) C-Stand 18 Sliding Leg The Avenger Century stand is unlike any other. Fitted with captive handles that do not vibrate free; utilizing a new lightweight steel making them up to 1kg lighter but just as strong; triple chrome plating resistant to corrosion; collar castings that pro.

Manfrotto A2018LJ C-Stand Sliding 175cm J Type

Manfrotto A2018LJ (MAN-A2018LJ, MAN/A2018LJ, MAN_A2018LJ, MANA2018LJ, man_a2018lj) C-Stand Sliding 175cm J Type It is a steel 3-stage 2-riser stand. The surface is chrome treated. The pipe diameter is φ35, 30, 25 mm. Leg φ25 mm.

Manfrotto A2018FCB C-Stand 18 Black Finish Version

Manfrotto A2018FCB (MAN-A2018FCB, MAN/A2018FCB, MAN_A2018FCB, MANA2018FCB, man_a2018fcb) C-Stand 18 Black Finish Version Turtle base chrome plated steel stand in black with 3 sections and 2 risers. Legs fold flat for easy storage. This stand has a maximum payload of 8kg and maximum height of 1.75m. The stand is also available in chrome plated steel. Legs fold flat for easy storage.

Manfrotto A2016DCB C-Stand 16 with Detachable Base Black

Manfrotto A2016DCB (MAN-A2016DCB, MAN/A2016DCB, MAN_A2016DCB, MANA2016DCB, man_a2016dcb) C-Stand 16 with Detachable Base Black Turtle base chrome plated steel stand in black with 3 sections and 2 risers. The base is detachable allowing easy transport. This stand has a maximum payload of 10kg and maximum height of 1.55m. The stand is also available in chrome plated steel.

Manfrotto A2014CB C-Stand Column 14

Manfrotto A2014CB (MAN-A2014CB, MAN/A2014CB, MAN_A2014CB, MANA2014CB, man_a2014cb) C-Stand Column 14 Chrome steel three sections column with 16mm female top attachment and 28mm female bottom receiver

Manfrotto A2014 C-Stand Column 14

Manfrotto A2014 (MAN-A2014, MAN/A2014, MAN_A014, MANA2014, man_a2014) C-Stand Column 14 Chrome steel three section column rising from 60cm to 139 cm (26.8in to 54.7in) with a 16mm female top attachment and 28mm female bottom receiver

Manfrotto A2009CB C-Stand Mini Base Black

Manfrotto A2009CB (MAN-A2009CB, MAN/A2009CB, MAN_A2009CB, MANA2009CB, man_a2009cb) C-Stand Mini Base Black Turtle base century stands are our most versatile, perfectly designed to allow you to use the base separately, as a backlight stand, or with various sized columns to meet your needs. The base can be used alone as a very low stand or with columns of different heights. It features a 28mm receiver. Legs fold flat for easy storage

Manfrotto A2009 C-Stand Base

Manfrotto A2009 (MAN-A2009, MAN/A2009, MAN_A2009, MANA2009, man_a2009) C-Stand Base Turtle base century stands are our most versatile, perfectly designed to allow you to use the base separately, as a backlight stand, or with various sized columns to meet your needs. The base can be used alone as a very low stand or with columns of different heights. It features a 28mm receiver. Legs fold flat for easy storage

Manfrotto A2007CB C-Stand Mini Base Chrome Black Steel

Manfrotto A2007CB (MAN-A2007CB, MAN/A2007CB, MAN_A2007CB, MANA2007CB, man_a2007cb) C-Stand Mini Base Chrome Black Steel Turtle base century stands are our most versatile, perfectly designed to allow you to use the base separately, as a backlight stand, or with various sized columns to meet your needs. The base can be used alone as a very low stand or with columns of different heights. It features a 28mm receiver. Legs fold flat for easy storage. The smaller footprint of this base allows for use in tighter spaces.

Manfrotto A2007 C-Stand Mini Base

Manfrotto A2007 (MAN-A2007, MAN/A2007, MAN_A2007 MANA2007, man_a2007) C-Stand Mini Base Turtle base century stands are our most versatile, perfectly designed to allow you to use the base separately, as a backlight stand, or with various sized columns to meet your needs. The base can be used alone as a very low stand or with columns of different heights. It features a 28mm receiver. Legs fold flat for easy storage

Manfrotto A120J Low Boy Combo Stand W. Sliding Leg

Manfrotto A120J (MAN-A120J, MAN/A120J, MAN_A120J, MANA120J, man_a120j) Low Boy Combo Stand W. Sliding Leg Chrome steel stand with 3 sections, 2 risers and 1 levelling leg. Please note this stand also features a female top attachment of 17,5mm (Japanese Type).

Manfrotto A1045B Combo Aluminium Stand 45 Black

Manfrotto A1045B (MAN-A1045B, MAN/A1045B, MAN_A1045B, MANA1045B, man_a1045b) Combo Aluminium Stand 45 Black Avenger Combo Stand 45 is a black aluminium stand with 4 sections and 3 risers. It's a heavy duty stand that can support a payload up to 30kg and can reach a maximum height of 4.50m. It is compatible with A900NB braked wheels which are sold separately. It features a 5/8'' (16mm) male stud top attachment and a 1''1/8 (28mm) female receiver. It also features 1 levelling leg to keep the stand steady on uneven surfaces.

Manfrotto A1035B Combo Aluminium Stand 35 Black

Manfrotto A1035B (MAN-A1035B, MAN/A1035B, MAN_A1035B, MANA1035B, man_a1035b) Combo Aluminium Stand 35 Black Avenger Combo Stand 35 is a black aluminium stand with 3 sections and 2 risers. It's a heavy duty stand that can support a payload up to 30kg and can reach a maximum height of 3.50m. It is compatible with A900NB braked wheels which are sold separately. It has a 5/8'' (16mm) male stud top attachment and a 1''1/8 (28mm) female receiver. It also features 1 levelling leg to keep the stand steady on uneven surfaces.

Manfrotto A1010CS Combo Stand 10 Steel

Manfrotto A1010CS (MAN-A1010CS, MAN/A1010CS, MAN_A1010CS, MANA1010CS, man_a1010cs) Combo Stand 10 Steel Avenger Combo Stand 10 is a chrome steel stand with 2 sections and 1 riser. It's a heavy duty stand that can support a payload up to 30kg and can reach a maximum height of 1m. It has a 5/8'' (16mm) male stud top attachment and a 1''1/8 (28mm) female receiver. It also features 1 levelling leg to keep the stand steady on uneven surfaces.

Manfrotto A0045CS Baby Stand 45 Steel

Manfrotto A0045CS (MAN-A0045CS, MAN/A0045CS, MAN_A0045CS, MANA0045CS, man_a0045cs) Baby Stand 45 Steel This is a chrome plated steel stand with 4 sections and 3 risers. The stand can hold a maximum payload of 9kg and can reach a maximum height of 4.50m. The stand features 1 levelling leg for easy operation on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto A0045B Baby Stand 45 Aluminium Black

Manfrotto A0045B (MAN-A0045B, MAN/A0045B, MAN_A0045B, MANA0045B, man_a0045b) Baby Stand 45 Aluminium Black This is a black aluminium stand with 4 sections and 3 risers. The stand can hold a maximum payload of 10kg and can reach a maximum height of 4.50m. The stand has 1 levelling leg so you can easily use it on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto A0040CS Baby Stand 40 Steel

Manfrotto A0040CS (MAN-A0040CS, MAN/A0040CS, MAN_A0040CS, MANA0040CS, man_a0040cs) Baby Stand 40 Steel This is a chrome plated steel stand with 4 sections and 3 risers. The stand can hold a maximum payload of 9kg and can reach a maximum height of 4m. The stand features 1 levelling leg for easy operation on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto A0040B Baby Stand 40 Aluminium Black

Manfrotto A0040B (MAN-A0040B, MAN/A0040B, MAN_A0040B, MANA0040B, man_a0040b) Baby Stand 40 Aluminium Black This is a black aluminium stand with 4 sections and 3 risers. The stand can hold a maximum payload of 9kg and can reach a maximum height of 4m. The stand has 1 levelling leg so you can easily use it on uneven surfaces. It also features a top attachment of 5/8'' (16mm).

Manfrotto A0035CS Baby Steel Stand 35

Manfrotto A0035CS (MAN-A0035CS, MAN/A0035CS, MAN_A0035CS, MANA0035CS, man_a0035cs) Baby Steel Stand 35 This is a chrome plated steel stand with 4 sections and 3 risers. The stand can hold a maximum payload of 9kg and can reach a maximum height of 3.50m. The stand features 1 levelling leg for easy operation on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto A0035B Aluminum Baby Stand 350cm

Manfrotto A0035B (MAN-A0035B, MAN/A0035B, MAN_A0035B, MANA0035B, man_a0035b) Aluminum Baby Stand 350cm A black aluminum stand with a 4-stage 3-riser configuration. It can hold up to 9 kg of equipment and can be extended to a height of 3.50 m. Equipped with one leveling leg for easy use even on rough terrain . It also has a 5/8 inch (16mm) top attachment.

Manfrotto A0030CS Steel Baby Stand 300cm

Manfrotto A0030CS (MAN-A0030CS, MAN/A0030CS, MAN_A0030CS, MANA0030CS, man_a0030cs) Steel Baby Stand 300cm This is a chrome plated steel stand with 4 sections and 3 risers. The stand can hold a maximum payload of 10kg and can reach a maximum height of 3m. The stand has 1 levelling leg for easy use on uneven surfaces. It features a 5/8'' (16mm) top attachment.

Manfrotto A0025B Aluminum Black Baby Stand 250cm

Manfrotto A0025B (MAN-A0025B, MAN/A0025B, MAN_A0025B, MANA0025B, man_a0025b) Aluminum Black Baby Stand 250cm This is a black aluminium stand with 3 sections and 2 risers. The stand can hold a maximum payload of 4kg and can reach a maximum height of 2.50m. The stand features 1 levelling leg for easy use on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto A0017 Avenger Baby Stand 17

Manfrotto A0017 (MAN-A0017, MAN/A0017, MAN_A0017, MANA0017, man_A0017) Avenger Baby Stand 17 This stand features steel legs and aluminium risers and is available in silver only. The stand has 3 sections and 2 risers, can support a maximum payload of 4kg and can reach a maximum height of 1.75m. It has 1 levelling leg so you can use it on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto A0010 Avenger Baby Stand 10

Manfrotto A0010 (MAN-A0010, MAN/A0010, MAN_A0010, MANA0010, man_a0010) Avenger Baby Stand 10 This stand features steel legs and aluminium risers and is available in silver only. The stand has 3 sections and 2 risers, can support a maximum payload of 15kg and can reach a maximum height of 1m. It has 1 levelling leg so you can use it on uneven surfaces. It also features a 5/8'' (16mm) top attachment.

Manfrotto 699 Safety Collar 40mm

Manfrotto 699 (MAN-699, MAN/699, MAN_699, MAN699, man_699) Safety Collar 40mm Secondary safety system for all speaker stands. When locked into position, it stops upper stand sections from dropping when you open the stand locking knob.

Manfrotto 649 Quick-Release Clamp

Manfrotto 649 (MAN-649, MAN/649, MAN_649, MAN649, MAN 649, man_649) Quick-Release Clamp Different from the other versions that are used mainly on round pipes, this version will also work on square and rectangular tubes. Extremely light, with a good ''coupling range'', this version also offers an incredible number of attachment sizes. Ideal for photographic applications and dedicated accessories. Pipe size 5-80mm.

Manfrotto 622CS Chrome Steel Microphone Stand

Manfrotto 622CS (622-CS, 622/CS, 622_CS, 622 CS, 622cs) Chrome Steel Microphone Stand The Manfrotto 622CS is an anodized aluminum microphone stand with a round cast iron base and features a "Quick release and lock" collar for quick and easy height adjustments from 1 - 1.95 m.

Manfrotto 622B Aluminum Microphone Stand (Black)

Manfrotto 622B (MAN-622B, MAN/622B, MAN_622B, MAN622B, man_622B) Aluminum Microphone Stand (Black) The Manfrotto Squeeze-Release Microphone Stand with Base is an anodized aluminum microphone stand with a round cast iron base and features a "Quick release and lock" collar for quick and easy height adjustments.

Manfrotto 613PAR T-Bar 2,650mm for Six PAR 57/64 Luminaires

Manfrotto 613PAR (613-PAR, 613/PAR, 613_PAR, 613 PAR, 613par) T-Bar 2,650mm for Six PAR 57/64 Luminaires Constructed from zinc steel and able to support up to 13.23 lb, the 8.7' Manfrotto T-Bar for PAR Cans allows you to mount six PAR 57 or 64 lights on one bar. Ideal for DJs, small theater productions, conventions, and entertainment venues, the T-Bar has six M10 screws with wing nuts for the lights, and a 1-1/8" Junior pin for stand mounting.

Manfrotto 432-3-7B Black Autopole 2 2.1-3.7m

Manfrotto 432-3-7B (432/3/7B, 432_3_7B, 43237B, 432-3.7B, 432-3,7B) Black Autopole 2 2.1-3.7m The hardworking autopole for big or small spaces. The Autopole 2 is ideal for creating backgrounds whatever space you have to work with. Because it extends from between 210cms and 370 cms, it can be adjusted to fit the area, whether that’s in the studio or on location. This ingenious and flexible system means you can create super-professional results every time, without any hassle. Aside from being nifty and functional, this autopole is made to last. It’s crafted from durable aluminium, and painted black for a stylish finish. This means that it’s strong enough to support what you need on the day, while being lightweight enough to pack away and carry to the next stop easily. Not only that, it has a smart cantilever system, enabling you to get everything into place with a few swift movements. To keep things extra secure, there’s an integrated safety lock, so when you're set up there’s no chance of slipping or wobbling. This helps the autopole to carry heavier loads with ease. Plus, rubber cups at each end give you a totally firm footing, regardless of the ground you're on, so you can be extra sure that you're completely stable.

Manfrotto 432-3-7 Autopole 2 2.1-3.7m

Manfrotto 432-3-7 (432/3/7, 432_3_7, 43237, 432-3.7, 432-3,7) Autopole 2 2.1-3.7m This 82.7-145.7" Manfrotto Deluxe Silver Single Autopole 2 was designed to serve the needs of image makers, decorators, and set designers. The brushed aluminum pole mounts between the floor and ceiling of a studio, or between any two flat, fixed surfaces and is secured with a large, spring-lock handle. A rubber foot at each end prevents abrasion damage. Extensions are available to accommodate higher ceilings or changes in the user's requirements. Accessories for the Autopole 2 include super clamps, hooks, grip arms, and background support systems. A spring-loaded tip combined with rubber suction cups on top and bottom provide greater security. Floor-to-ceiling or wall-to-wall, this Autopole provides strong vertical or horizontal support for lighting.

Manfrotto 432-2-7B Short Deluxe Autopole 2, Black

Manfrotto 432-2-7B (432/2/7B, 432_2_7B, 43227B, 432-2.7B, 432-2,7B) Short Deluxe Autopole 2, Black The 432-2.7B Short Deluxe Autopole 2 from Manfrotto, with a black aluminum finish, mounts between the floor and ceiling of a studio with a larger, stronger spring-lock handle than a standard Autopole. If the studio ceiling is higher than 8.8', then Autopole bases, extensions, or the standard-sized Autopole 2 may be ordered separately. Autopoles support backgrounds, lights, and grip arms with the addition of Super Clamps, hooks, and crossbars. Strong support for backgrounds, lights, and grip. May also be used as a crossbar in a door or entranceway

Manfrotto 432-2-7 Autopole 2 1.5-2.7m

Manfrotto 432-2-7 (432/2/7, 432_2_7, 43227, 432 2 7, 432-2,7) Autopole 2 1.5-2.7m Provided with Autopole2 locking system with 2 settings for thrust tension. Extends from 150cm to 270cm. Pole diameter: 45mm and 40mm.

Manfrotto 420NSB Combi Boom Stand Black

Manfrotto 420NSB (420-NSB, 420/NSB, 420_NSB, 420 NSB, 420nsb) Combi Boom Stand Black Light up your studio shoots like never before. This Aluminium Light Stand is perfect for portrait and product photographers due to its highly manoeuvrable, lightweight design, which allows you to set it up and pack it away quickly. This boom stand is ideal for smaller studios, where photographers have more limited framing and shooting options. Its height ranges from 1.1 to 2.1 metres so you can use it for an extensive range of shoots. By not having to use multiple stands, you can minimise your costs and maximise space. Better still, you can easily fit this portable stand in your kitbag without all the weight and bulk of a sandbag. Intuitively designed with a sturdy aluminium build, this boom stand allows you to improve background and overhead lighting so you can shoot more precisely. It's particularly well suited to light or medium lighting equipment, and acts as a boom stand when used with a sandbag.This product does not include the sandbag.

Manfrotto 420CSUNS Convertible Boom Stand with Steel Base

Manfrotto 420CSUNS (420-CSUNS, 420/CSUNS, 420_CSUNS, 420 CSUNS, 420csuns) Convertible Boom Stand with Steel Base Light up each and every shoot to perfection. This fantastic Combi-Boom Stand is made for small spaces, so it’s perfectly suited to studio work. Not only that, it’s packed with a whole list of user-friendly features to keep you on track with minimal fuss, and it’s ultra-easy to take with you. A removable base only adds to this clever portability, so you can store this stand or pack it into you bag as needed without fuss. This light stand is perfectly made for studio work, with lockable wheels that allow you to effortlessly move around, and stay steady when you're in position. Not only that, it’s easy to store and take with you from place to place, sliding feet add to it's compact and easy to use capabilities. And because it comes without a sandbag, it’s even easier to take with you as you travel. Plus, it's strong enough to hold several lights at once, making it not only portable, but heavy-lifting too. Giving you a whole world of creative possibilities, this stand has a diameter of 35mm and reaches right up to 250cms, ticking off just the right dimensions for studio work. A smart spring loading arm allows for ultra-precise height modifications too, so you can glide from one position to the next with complete accuracy, and without any wobbles. And you can convert it into a boom with just the press of a lever, so you really do have the ultimate two-in-one studio solution.

Manfrotto 420CSU Combi-Boom Stand HD

Manfrotto 420CSU (420-CSU, 420/CSU, 420_CSU, 420 CSU, 420csu) Combi-Boom Stand HD Light up each and every shoot to perfection. This fantastic Combi-Boom Stand is made for small spaces, so it’s perfectly suited to studio work. Not only that, it’s packed with a whole list of user-friendly features to keep you on track with minimal fuss, and it’s ultra-easy to take with you. A removable base only adds to this clever portability, so you can store this stand or pack it into you bag as needed without fuss. This light stand is perfectly made for studio work, with lockable wheels that allow you to effortlessly move around, and stay steady when you're in position. Not only that, it’s easy to store and take with you from place to place, sliding feet add to it's compact and easy to use capabilities. And it's strong enough to hold several lights at once, making it not only portable, but heavy-lifting too. Giving you a whole world of creative possibilities, this stand has a diameter of 35mm and reaches right up to 392cm, ticking off just the right dimensions for studio work. A smart spring loading arm allows for ultra-precise height modifications too, so you can glide from one position to the next with complete accuracy, and without any wobbles. This stand weighs 5,6kg and holds a maximum payload of 12kg.

Manfrotto 396B-2 2-Section Double Articulated Arm with Camera Attachment

Manfrotto 396B-2 (396B/2, 396B_2, 396B2, 396B 2, 396b-2) 2-Section Double Articulated Arm with Camera Attachment Excellent performance: robustness, lightness and versatility... these are the features of the new double articulated arm range. The 396 family has been developed to provide greater robustness than the 196 range and to support heavier loads (upto 5kg), though keeping versatility thanks to its extendable sliding arm system (extends upto 625mm), further enhanced by its quick lock system. The new bottom attachment adds to the strength and versatility of the 396, with a spigot that combines both a hexagonal part (for anti-rotation fixing to the Superclamp system) and a universal adapter section (for fitting to a wide range of stands, clamps and accessories). The top attachment is provided with a camera bracket with 16mm spigot and camera attachment, while the bottom attachment is provided with a double-anchored 16mm hexagonal/universal spigot.

Manfrotto 396AB-3 Double Arm 3-Secion

Manfrotto 396AB-3 (396AB/3, 396AB_3, 396AB3, 396AB 3, 396ab-3) Double Arm 3-Secion Excellent performance: robust, light and versatile - these are the features of the new double articulated arm range. The 396 family has been developed to provide greater robustness than the 196 range and to support heavier loads (upto 5kg), maintaining versatility thanks to its extendable sliding arm system (extends upto 860mm), further enhanced by its quick lock system. The new bottom attachment adds to the strength and versatility of the 396, with a spigot that combines both a hexagonal part (for anti-rotation fixing to the Superclamp system) and a universal adapter section (for fitting to a wide range of stands, clamps and accessories). The top attachment is provided with a 16mm spigot 3/8'' light attachment, while the bottom attachment is provided with a double-anchored 16mm hexagonal/universal spigot.

Manfrotto 396AB-2 Double Arm 2-Section

Manfrotto 396AB-2 (396AB/2, 396AB_2, 396AB2, 396AB 2, 396ab-2) Double Arm 2-Section Excellent performance: robustness, lightness and versatility... these are the features of the new double articulated arm range. The 396 family has been developed to provide greater robustness than the 196 range and to support heavier loads (upto 5kg), though keeping versatility thanks to its extendable sliding arm system (extends upto 625mm), further enhanced by its quick lock system. The new bottom attachment adds to the strength and versatility of the 396, with a spigot that combines both a hexagonal part (for anti-rotation fixing to the Superclamp system) and a universal adapter section (for fitting to a wide range of stands, clamps and accessories). Top attachment: 16mm spigot 3/8'' light attachment. Bottom attachment: Double-anchored 16mm hexagonal/universal spigot.

Manfrotto 375 Multiclip

Manfrotto 375 (MAN-375, MAN/375, MAN_375, MAN375, man_375) Multiclip This versatile double clip can be used to hold gels in front of lights or small reflecting panels.

Manfrotto 374 Wheel Set 160mm With Brakes

Manfrotto 374 (MAN-374, MAN/374, MAN_374, MAN374, man_374) Wheel Set 160mm With Brakes This is a set of 3 braked wheels that are 6.3 inches (160mm) in diameter. Designed to be used in extreme conditions of overload. These wheels, having a wide tread, sink into soft ground much less than any other model. Compatible with the following stand: 387XU.

Manfrotto 335AS Additional Socket For Super Clamp

Manfrotto 335AS (335-AS, 335/AS, 335_AS, 335 AS, 335as) Additional Socket For Super Clamp The Manfrotto 335AS Pro Socket provides an an additional 5/8" socket to a Super Clamp. Supplied with a safety pin mechanism, identical to the one used on the Super Clamp, and a built in slot, that can be used for safety cables.

Manfrotto 3355 Bracketed Stand for Collapsible Backgrounds

Manfrotto 3355 (MAN-3355, MAN/3355, MAN_3355, MAN3355, man_3355) Bracketed Stand for Collapsible Backgrounds This Manfrotto Bracketed Stand for Backgrounds is perfect for supporting Lastolite collapsible backgrounds. Since it has five sections, support strength is maintained as the fixture is raised; most of the column remains inside the main shaft. Quick Set Up Sets up easily in the matter of seconds Aluminum Locking Collars Made from pressure die cast aluminum Standard Top Stud Fitted with a 5/8" top stud Double Braced Leg Base Provides extra stability, giving the stand more strength

Manfrotto 3301 Rapid Adapter - 5/8" to Long 3/8" Diameter Stud

Manfrotto 3301 (MAN-3301, MAN/3301, MAN_3301, MAN3301, man_3301) Rapid Adapter - 5/8" to Long 3/8" Diameter Stud Most lighting fixtures accept the standard top stud on light stands, which meaures 5/8 inches in diameter. For those fixtures that accept nothing larger than 3/8 in studs, order the Manfrotto 3301 Rapid Adapter (5/8" to Long 3/8" Diameter Stud) to fit your fixture onto your standard light stand.

Manfrotto 320PX Perspex Panel For Mini Table

Manfrotto 320PX (320-PX, 320/PX, 320_PX, 320 PX, 320px) Perspex Panel For Mini Table The Manfrotto 320PX Plexiglass Panel is a white translucent plexiglass that mounts with touch fastener tape, and may be tilted/bent upward and locked into place, to any angle up to 90°, for totally seamless backgrounds. It is designed to fit the Manfrotto 320 shooting table frame, but may be suitable for your own shooting table frame.

Manfrotto 320PSLB Mini Still Life Table Black without Cover

Manfrotto 320PSLB (320-PSLB, 320/PSLB, 320_PSLB, 320 PSLB, 320pslb) Mini Still Life Table Black without Cover Smaller version of Still Life Table model 220, black painted, but without perspex cover. Size of panel: 150 x 78cm. Distance from floor to flat surface: 70cm. Height with back in vertical position: 157cm. Adjustable tilting back and adjustable front legs.

Manfrotto 320PSL Mini Still Life Table without Cover

Manfrotto 320PSL (320-PSL, 320/PSL, 320_PSL, 320 PSL, 320psl) Mini Still Life Table without Cover Smaller version of Still Life Table model 220, but without perspex cover. Size of panel: 150 x 78cm. Distance from floor to flat surface: 70cm. Height with back in vertical position: 157cm. Adjustable tilting back and adjustable front legs.

Manfrotto 320 Mini Still Life Table

Manfrotto 320 (MAN-320, MAN/320, MAN_320, MAN320, MAN 320, man_320) Mini Still Life Table Smaller version of Still Life Table model 220. Size of panel: 150 x 78cm. Distance from floor to flat surface: 70cm. Height with back in vertical position: 157cm. Adjustable tilting back and adjustable front legs.

Manfrotto 299BBASE Small Brake Base Black

Manfrotto 299BBASE (299B-BASE, 299B/BASE, 299B_BASE, 299B BASE, 299bbase) Small Brake Base Black This base can be used for backlights of most sizes. Simply add a century stand column to create your own rolling stand. For leg storage fold up in a small package. Complete with braked wheels and 1 levelling leg.

Manfrotto 299B Baby Studio Stand Black

Manfrotto 299B (299-B, 299/B, 299_B, 299 B, 299b) Baby Studio Stand Black Black steel base, silver anodised aluminium sections, complete with wheels. 3 sections, 2 risers. 1 levelling leg.

Manfrotto 298B 3-Section Aluminium Studio Stand Black

Manfrotto 298B (298-B, 298/B, 298_B, 298 B, 298b) 3-Section Aluminium Studio Stand Black Black steel base, silver anodised aluminium sections, complete with wheels. 3 sections, 2 risers. 1 levelling leg.

Manfrotto 2983 Adjustable Background Holder Crossbar

Manfrotto 2983 (MAN-2983, MAN/2983, MAN_2983, MAN2983, man_2983) Adjustable Background Holder Crossbar This is an Adjustable Background Holder Crossbar from Manfrotto that is adjustable from 3.7 - 9.0'. It has horizontal and vertical 5/8" sockets to accept light stands with matching studs.

Manfrotto 297FBASE Large Foot Base Black

Manfrotto 297FBASE (297F/BASE, 297F_BASE, 297F BASE, 297fbase) Large Foot Base Black Manfrotto Studio Black Large Foot Base with 1 levelling leg, complete with feet.

Manfrotto 297BBASE Large Brake Base Black

Manfrotto 297BBASE (297B-BASE, 297B/BASE, 297B_BASE, 297B BASE, 297bbase) Large Brake Base Black The Mafrotto 297B Wheeled Stand Base is suitable for mounting light or heavy-weighted fixtures close to the floor or ground. It has a Junior (1-1/8") female receptor for larger fixtures, and a Baby (5/8") stud for smaller fixtures. It folds for easy transport and storage.

Manfrotto 220PX Perspex Cover For Still Life Table

Manfrotto 220PX (220-PX, 220/PX, 220_PX, 220 PX, 220px) Perspex Cover For Still Life Table White, translucent perspex cover for back or front lighting. Size of panel: 200 x 122cm.

Manfrotto 220PSLB Still Life Table Black Without Cover

Manfrotto 220PSLB (220-PSLB, 220/PSLB, 220_PSLB, 220 PSLB, 220pslb) Still Life Table Black Without Cover Still Life Table black with a 200cm x 122cm panel. Distance from floor to flat surface: 83cm. Height with back on vertical position: 193cm. Adjustable tilting back.

Manfrotto 220PSL Still Life Table Without Cover

Manfrotto 220PSL (220-PSL, 220/PSL, 220_PSL, 220 PSL, 220psl) Still Life Table Without Cover Still Life Table with a 200cm x 122cm panel. Distance from floor to flat surface: 83cm. Height with back on vertical position: 193cm. Adjustable tilting back.

Manfrotto 220 Still Life Table

Manfrotto 220 (MAN-220, MAN/220, MAN_220, MAN220, man_220) Still Life Table Convenient, versatile, and dependable, this still life table is the perfect companion for studio photographers. Designed for capturing items in single or group shots, this accessory adds a professional touch to your kit. Featuring a translucent Perspex cover, this still life table is easy to light from the back or the front. Adjust the lighting to your desired angle thanks to this innovative add-on. Easy to assemble and disassemble, you can set it up in seconds without the need for tools. When you're done for the day, simply take it apart and tuck it neatly in you studio. It’s compact design ensures that it won't take up space, making it a smart replacement for bulky, handmade tables. The Plexiglas measures 125cm by 79cm, and can quickly be mounted with the included fastener tape. The impressive panel reaches a vertical height of 193cm when the back is in it's vertical position. With a dimension of 200 cm by 122 cm, you'll be able to capture a wide range of items in their best light. Also featuring an adjustable tilting back, you'll be able to make small adjustments with ease. This still life table can also be fitted with wheels for easy manoeuvrability. Make those product shots stand out with this nifty accessory that takes your work to the next level. Designed in Italy with the highest standards of quality, it’s built to last and withstand heavy use.

Manfrotto 203 Extension Arm for Mini Clamp

Manfrotto 203 (MAN-203, MAN/203, MAN_203, MAN203, man_203) Extension Arm for Mini Clamp The Manfrotto 203 Extension Arm extends a small light head 4.72" (12 cm) from your #171 Mini Clamp. It includes a #013 double-ended spigot that has a 1/4"-20 and a 3/8" screw thread.

Manfrotto 172 Mini Counterweight

Manfrotto 172 (MAN-172, MAN/172, MAN_172, MAN172, MAN 172, man_172) Mini Counterweight The Manfrotto 172 Counter Balance Weight is a 3 lbs (1.4kg) counterweight that clamps on tubes 13 to 30mm thick.

Manfrotto 170B Mini Floor-To-Ceiling Pole (Black)

Manfrotto 170B (170-B, 170/B, 170_B, 170b, 170 B) Mini Floor-To-Ceiling Pole (Black) This black Mini Floor-to-Ceiling Pole from Manfrotto is a spring-loaded autopole that extends from 5.7' to 10.8' that helps support lights, grip arms, or booms. It mounts between the floor and ceiling or possibly in other locations like wall to wall.

Manfrotto 170 Mini Floor-To-Ceiling Pole

Manfrotto 170 (MAN-170, MAN/170, MAN_170, MAN170, MAN 170, man_170) Mini Floor-To-Ceiling Pole This silver Mini Floor-to-Ceiling Pole from Manfrotto is a spring-loaded autopole that extends from 5.7' to 10.8' that helps support lights, grip arms, or booms. It mounts between the floor and ceiling or possibly in other locations like wall to wall.

Manfrotto 169 Five Socket Bracket

Manfrotto 169 (MAN-169, MAN/169, MAN_169, MAN169, MAN 169, man_169) Five Socket Bracket 100cm long T Bar with 5 x 28mm sockets for attaching up to 5 lighting fixtures. Designed to fit on stand or bracket with 28mm socket. When load on one side only, max load capacity: 15kg.

Manfrotto 146CS Steel High Stand Extension

Manfrotto 146CS (146-CS, 146/CS, 146_CS, 146 CS, 146cs) Steel High Stand Extension This Manfrotto 146CS High Steel Stand Extension attaches to the top of your heavy duty stand and extends its height an additional 53 - 123.6" (1.4 x 3.1 m). It has two locking riser sections. It tops off with a removable #3094 reversible Baby (5/8") stud with 3/8" and 1/4"-20 thread. It also will accept a Junior (1-1/8") stud.

Manfrotto 146B Aluminium High Stand Extension Black

Manfrotto 146B (146-B, 146/B, 146_B, 146 B, 146b) Aluminium High Stand Extension Black This Manfrotto 146B High Aluminum Stand Extension attaches to the top of your heavy duty stand, and extends its height an additional 53 - 123.6" (1.4 x 3.1 m). It has two locking riser sections. It tops off with a removable #3094 reversible Baby (5/8") stud with 3/8" and 1/4"-20 thread. It also will accept a Junior (1-1/8") stud.

Manfrotto 143R Magic Arm With Superclamp

Manfrotto 143R (143-R, 143/R, 143_R, 143 R, 143r) Magic Arm With Superclamp The Manfrotto Magic Arm is your extra arm in the studio. An articulated arm with one centre lever to lock all three pivot points. Ideal for mounting a camera, light, gobo, etc, at the exact angle you need it. Incorporates 5/8" male studs on ball joints at both ends with 3/8" and 1/4-20" female thread. Length: 53cm. Supplied with Super Clamp 035.

Manfrotto 142CS Steel Extension 2-Section Stand

Manfrotto 142CS (142-CS, 142/CS, 142_CS, 142 CS, 142cs) Steel Extension 2-Section Stand The Manfrotto 2 Section Steel Extension Pole has 1 riser: It's bottom attachment is a 1 1/8" TV Spigot, designed to fit into your Cine Stand, or other stand that has a Junior receptor top. Its minimum extension is 4.3 ft ((1.3 m), the maximum is 7.25 ft (2.2 m).

Manfrotto 142B Aluminium Extension 2-Section Stand, Black

Manfrotto 142B (142-B, 142/B, 142_B, 142 B, 142b) Aluminium Extension 2-Section Stand, Black The Manfrotto 142B Aluminum Stand Extension extends the height of your heavy duty cine stand 49.2 - 82.7" (1.2 - 2.1 m). It has two black sections, one riser.

Manfrotto 126CSU Heavy Duty Stand

Manfrotto 126CSU (126-CSU, 126/CSU, 126_CSU, 126 CSU, 126csu) Heavy Duty Stand Reliable, heavy-duty, and sturdy, this black Steel Heavy Duty Stand is the perfect choice for professional photographers using high-end equipment. Handle your lighting with ease in the studio or on location with this top-quality pick. Designed to safely support a maximum payload of up to 40kg, this 3-section stand is impressive and features the latest innovations. It's strong, double-braced legs keep your lighting stable, no matter the environment. Simply lock them in place to you designed height, and get to work knowing that the legs won't budge. Featuring a levelling leg for added safety, you can use this stand in rougher environments. With a weight of 8.3kg and added safety features, it won't easily be knocked over by strong winds or unexpected movements. Able to reach a maximum height of 333cm, you'll be able to achieve the shot you're looking for. With a universal head type 14 with a 28mm socket and a 16mm stud, this steel stand is compatible with a wide range of equipment such as 109, 110 and 110G wheel sets.

Manfrotto 126BSUAC Air-Cushioned Heavy Duty Steel Stand, Black

Manfrotto 126BSUAC (126B-SUAC, 126B/SUAC, 126B_SUAC, 126B SUAC, 126bsuac) Air-Cushioned Heavy Duty Steel Stand, Black Lightweight, secure, and dependable, this Air-cushioned Heavy Duty Junior Stand gets the job done with ease. Manufactured in Italy and meeting only the highest quality of design standards, it’s a powerful addition for on-the-go photographers and videographers. Perfect for both indoor and outdoor use, this stand is a must-have piece of equipment for both studio and location-based content creators and image makers. Benefiting from air-cushioning is that it keeps your movements smooth and sure, but you also won't need to worry about damage to your photography equipment or catching your fingers during accidental retraction. In addition to features such as a levelling leg and double-braced legs it provides a solid support, no matter the environment. Rest assured knowing that your equipment is secure thanks to the stands locking features and professional design. The impressive specifications go on to make this stand indispensable for even the most demanding creative professionals moving from location to location. It is capable of safely supporting an impressive payload of up to 40kg, despite it's extremely lightweight design and meaning it provides the stability and quality required without having to compromise on portability. In addition with a closed length of 1.3m and extending to a maximum height of 3.33m it suits a wide range of purposes. With a universal head type 14 with a 28mm socket and 16mm stud, this stand is ideal for an extensive range of equipment. Compatible with wheel sets 109, 110 & 110G.

Manfrotto 126BSU Heavy Duty Steel Stand, Black

Manfrotto 126BSU (126-BSU, 126/BSU, 126_BSU, 126 BSU, 126bsu) Heavy Duty Steel Stand, Black Lightweight, secure, and dependable, this Heavy Duty Junior Stand gets the job done with ease. Manufactured in Italy and meeting only the highest quality of design standards, it’s a powerful addition for on-the-go photographers and videographers. Perfect for both indoor and outdoor use, this stand is a must-have piece of equipment for both studio and location-based content creators and image makers. Equipped with a levelling leg and a double-braced legs it provides a solid support, no matter the environment. Rest assured knowing that your equipment is secure thanks to the stands locking features and professional design. The impressive specifications go on to make this stand indispensable for even the most demanding creative professionals moving from location to location. It is capable of safely supporting an impressive payload of up to 40kg, despite it's extremely lightweight design and meaning it provides the stability and quality required without having to compromise on portability. In addition with a closed length of 131cm and extending to a maximum height of 3.33m it suits a wide range of purposes. With a universal head type 14 with a 28mm socket and 16mm stud, this stand is ideal for an extensive range of equipment. Compatible with wheel sets 109, 110 & 110G.

Manfrotto 126BMUAC Air-Cushioned Levelling Leg LE Stand Black

Manfrotto 126BMUAC (126B-MUAC, 126B/MUAC, 126B_MUAC, 126B MUAC, 126bmuac) Air-cushioned Levelling Leg LE Stand Black Black aluminium stand, air cushioned. 2 sections, 1 riser. 40, 35mm. Leg diameter: 22mm. 1 levelling leg.

Manfrotto 111CSU Steel Tall Strand 1 Levelling Leg

Manfrotto 111CSU (111-CSU, 111/CSU, 111_CSU, 111 CSU, 111csu) Steel Tall Strand 1 Levelling Leg The tall, nifty and user-friendly Steel Tall Stand. The Tall Stand is ideal for almost any shoot, combining far-reaching capabilities with clever features to make it a breeze to use. One such feature is it's small footprint of 102cm. This enables you to work even in the tightest spaces, so you can get perfect results every single time. Plus, it’s made to Italy’s world-leading quality standards, so you can be sure it’s built to last. Other standout features include a chrome plated steel design, giving you total strength even with heavier payloads. It has 3 sections and 2 risers, enabling you to extend and retract with minimal fuss, and the legs are double braced for extra stability, so you'll never have to worry about this stand buckling under the strain. Capable of lifting up to 25 kg, you certainly have the kit for almost any job with this Tall Stand in you bag. One levelling leg gives you easy ability to adjust to perfection. In the package you'll find a universal head type 14 featuring a 28mm socket with 16mm stud, making it compatible with almost any attachment.

Manfrotto 111BSU Tall 3-Sections Stand 1 Levelling Leg, Black

Manfrotto 111BSU (111-BSU, 111/BSU, 111_BSU, 111 BSU, 111bsu) Tall 3-Sections Stand 1 Levelling Leg, Black Everything you need for any shoot - the Steel Tall Stand is made for both location and studio shoots, so you can be sure you've got the right stand for the job, regardless of what’s needed on the day. Not only that, it’s made for professionals on-the-go, with a lightweight design that makes it an easy piece of kit to carry around. Other great features include smart double leg bracing, giving you ultimate stability when you're set-up, so you'll never have to worry about your gear slipping at the crucial moment. Despite being light enough to transport without any bother, it’s heavy-lifting too. It can support up to 25kgs, so you really can be sure that this stand is up to the challenge, whatever the shoot demands. To make life even easier, this must-have stand includes universal head type 14 for total adaptability, plus a 28mm socket and a 16mm stud. This gives you everything you need in one neat package. Adding to it's portability, it can be folded away when not in use too, thanks to a 3-section design plus 2 risers, while a levelling leg enables you to get a firm footing, whatever the terrain.

Manfrotto 110G 100mm Locking Caster Set

Manfrotto 110G (MAN-110G, MAN/110G, MAN_110G, MAN 110G, MAN110G, man_110g) 100mm Locking Caster Set Wheel set of three with brakes and adapter for 22mm diameter legs. These wheels can support a maximum payload of 100kg.

Manfrotto 110 75mm Wheel With Brakes And Adapter

Manfrotto 110 (MAN-110, MAN/110, MAN_110, MAN110, man_110) 75mm Wheel With Brakes And Adapter The Manfrotto 110 Braked Caster Set is a set of 3 75mm diameter braked wheels with adapter for any light stand legs that are 22mm in diameter. They slip onto the leg ends, and are locked in place using a hex wrench. They are specifically compatible with the following Manfroto stands: 007U, 008U, 008XU, 008BU, 126U, 145U, 608BU, 626BU, 645BU.

Manfrotto 104G Wheel Set 100mm With Brakes

Manfrotto 104G (104-G, 104/G, 104_G, 104 G, 104g) Wheel Set 100mm With Brakes The ultimate wheel set for studio work. This essential Wheel Set is a must-have addition to any professional’s kit, made to complement a whole variety of stands, so you can simply attach when needed. Made to Italy’s world-leading quality standards, these nifty wheels are made to glide across a variety of different surfaces too, so you'll only ever need one set of wheels in your bag. Sturdy as well as smooth moving, each wheel in this 3-pack are 100mm in diameter, this gives you total stability, even on the trickiest shoots. They also come complete with a top attachment with a M10 screw, enabling you to pair them up with whatever camera stand you need on the day. And they come in a stylish grey colour, so they'll blend in nicely with almost any type of kit used. Aside from their smooth rolling action, these wheels also have firm, and totally reliable brakes. That way, you'll never have to worry about any slips or dangerous drifting of equipment again, even when you're supporting heavier loads or working on glossier surfaces. These wheels can support a maximum weight of 100kg.

Manfrotto 104 Wheel Set With Brakes

Manfrotto 104 (MAN-104, MAN/104, MAN_104, MAN104, man_104) Wheel Set With Brakes Manfrotto braked wheels with M10 Thread mounts.

Manfrotto 1005BAC-3 Aluminium Ranker Air-Cushioned Light Stand Quick Stack 3-Pack, Black

Manfrotto 1005BAC-3 (1005BAC/3, 1005BAC_3, 1005BAC3, 1005BAC 3, 1005bac-3) Aluminium Ranker Air-Cushioned Light Stand Quick Stack 3-Pack, Black The 3-Pack Ranker Stand includes three of the Ranker Lighting Stand which are super easy to use, making them the ideal choice for any professional looking to support equipment such as Studio Lighting, LED lights and a large array of studio equipment and photography accessories in the studio or on location. Top features include Manfrotto’s own Quick Stack System, clever air cushioning and a durable aluminium design. This makes it both lightweight and strong. Plus, it’s incredibly easy to transport and store thanks to an ingenious collapsible system which provides a slim profile when folded. Thanks to its aluminium frame, this light stand can hold up to an impressive 10kg, making it perfect even for heavier loads. The great benefit of the air cushioning is that it keeps your movements smooth and sure, but you also won't need to worry about damage to your photography equipment or catching your fingers during accidental retraction. Manfrotto’s Quick Stack System allows for multiple stands of the same type to be neatly and securely clipped together for storage in the studio and for transportation when working on location, supporting your creativity by ensuring your lighting support is always on hand and you can be set up within moments. This stand features a 16mm (5/8”) upright and 90 degree angled female socket and includes a 16mm removable and reversible spigot with a 1/4” and 3/8” thread, so pairing it up with any accessory you need is quick and simple. Plus, has an extra wide 106cm footprint, giving you all the stability you need, even on tricky terrain.

Manfrotto 099B Extension For Light Stands, Black

Manfrotto 099B (MAN-099B, MAN/099B, MAN_099B, MAN099B, MAN 099B, man_099B) Extension For Light Stands, Black The Manfrotto 099B Three Section Extension Pole extends from 35 to 92" (0.89 - 2.3 m). It will accept and lock onto a stand top that has a Baby (5/8") stud. It has three sections (two risers) and tops off with a Baby stud with a 3/8" thread.

Manfrotto 098SHB Black Short Wall Boom

Manfrotto 098SHB (098-SHB, 098/SHB, 098_SHB, 098 SHB, 098shb) Black Short Wall Boom Unlike the Auto Boom, which may be attached to a wall or a stand, this Manfrotto 098SHB Short Wall Boom arm must be attached to a wall. It has a black finish, and includes a double ended stud for mounting a fixture.

Manfrotto 098B Black Wall Boom

Manfrotto 098B (MAN-098B, MAN/098B, MAN_098B, MAN098B, man_098B) Black Wall Boom Wall mounted boom arm. 2 section (diameter 35, 29mm). Rotation: 160 degrees vertically and 180 degrees horizontally. 4,5kg load at maximum extension (210cm). Minimum extension: 120cm.

Manfrotto 094 Expan Chain Stretcher

Manfrotto 094 (MAN-094, MAN/094, MAN_094, MAN094, man_094) Expan Chain Stretcher This is an Manfrotto 094 Weight for Plastic Expan Chain. It keeps the chain tangle-free and tidy.

Manfrotto 093 Large Cable Clip 28mm to 40mm

Manfrotto 093 (MAN-093, MAN/093, MAN_093, MAN093, MAN 093, man_093) Large Cable Clip 28mm to 40mm The Manfrotto 093 Cable Clip, Large (Set of Four) (Black) are made to keep light cables gathered to the light stand. For light stand riser diameters from 28-40mm. Package of four (Allen wrench not included).

Manfrotto 087WBK Windbracing Kit For 087NW

Manfrotto 087WBK (087-WBK, 087/WBK, 087_WBK, 087 WBK, 087wbk) Windbracing Kit For 087NW The Manfrotto 087WBK Wind Bracing Kit consists of 3 ropes for all the stands with attachment type 14, and Super Wind-Up 387U.

Manfrotto 087PA Peg Adapter Set For 069/083/08

Manfrotto 087PA (087-PA, 087/PA, 087_PA, 087 PA, 087pa) Peg Adapter Set For 069/083/08 To be used where, for safety reasons, the stand must be secured to the floor. Set of three.

Manfrotto 085BSL Light Boom 35 Black A25 without Stand

Manfrotto 085BSL (085-BSL, 085/BSL, 085_BSL, 085 BSL, 085bsl) Light Boom 35 Black A25 without Stand Diameter 35mm. 3 section boom arm complete with Pivoting Clamp 123, Counter Weight 022, cable clips and locking key. Load: 6kg at maximum extension (250cm) with 7kg of counter weight. Weight: 2.2kg, boom only. Dismantled length: 100cm. Assembled: 280cm.

Manfrotto 085B Light Boom 35 Black A25 With Cine

Manfrotto 085B (085-B, 085/B, 085_B, 085 B, 085b) Light Boom 35 Black A25 With Cine Diameter Black 35mm 3 section boom arm complete with Pivoting Clamp 123, Counter Weight 022, Cine Stand 3071 with casters, cable clips and locking key, boom only.

Manfrotto 081 Background Baby Hooks

Manfrotto 081 (MAN-081, MAN/081, MAN_081, MAN081, man_081) Background Baby Hooks The 081 is the perfect product for every photographer who wants to support a background paper very quickly and easily using the stands. The ''Baby Hook for Expan” is easily attachable to the 16mm (5/8’’) connection on top riser of the stand.

Manfrotto 070CSU Follow Spot Stand

Manfrotto 070CSU (070-CSU, 070/CSU, 070_CSU, 070 CSU, 070csu) Follow Spot Stand Heavy-duty, reliable and strong enough for heavy gear. The Follow Spot Stand ticks all the right boxes if you're looking for a professional standard stand that gives you the flexibility to move around easily. It’s made from hardwearing materials, with chrome plated steel legs for additional strength, and to Italy’s world-class quality standards, so you can trust this stand to last, even in the busiest studio. The chrome plated steel certainly makes this a stand to be reckoned with in terms of strength, but to add to this, the legs are double braced meaning it is strong enough to support up to 40kg. To add to these great features, this stand also has a levelling leg for super steady shots, even on the roughest ground. It's low height makes it easy for a lighting technician to follow a subject seamlessly and without obstruction. Plus, it comes with a universal head type 14, along with a 28mm socket and a 16mm stud, which makes it compatible with a whole range of photographic devices.

Manfrotto 070BU Black Aluminium Follow Spot Stand

Manfrotto 070BU (070-BU, 070/BU, 070_BU, 070 BU, 070bu) Black Aluminium Follow Spot Stand Reliable, lightweight, and dependable, this Follow Spot Stand supports heavy professional equipment with ease. Capture your best shots no matter where you are thanks to this portable solution that’s ready for anything. Made with durable black aluminium, it features 2 sections and 1 riser and is designed for high-end photography equipment. This stand can comfortably support a maximum payload of up to 18 kg with it's chrome-plated steel legs. Rest assured that your gear is always safe and that your stand won't buckle under pressure. Also lightweight for it's size, weighing only 7.5kg, it is a practical and portable solution for photographers moving from location to location. Equally suited for indoor or outdoor shooting, this stand features a leveling leg for added stability and reliability. Take it out on uneven terrain and counterbalance any balancing issues thanks to the leveling leg. It's low height also enables lighting technician to smoothly follow subjects without any obstruction. Featuring a universal head type 14 with 28mm socket and a 16mm stud, this follow spot stand is universally compatible with most photographic equipment, so you can use it time and time again. Built with the highest standards of quality and manufactured in Italy, it’s built to last and withstand the tests of time.

Manfrotto 024B Light Boom Assembly Black

Manfrotto 024B (024-B, 024/B, 024_B, 024 B, 024b) Light Boom Assembly Black This Back Light Boom attaches to the shaft of most lightstands with diameters of 19, 20, 25, 28mm. The top tube diameter: 25mm 3 sections boom arm complete with Pivoting Clamp 124, Counter Weight G-Peso 023, cable clips and locking key. The ful assembled length is 200cm.

Manfrotto 012B Backlite Stand Black

Manfrotto 012B (012-B, 012/B, 012_B, 012 B, 012b) Backlite Stand Black Perfect for busy professionals. The backlight photo stand features a durable aluminium 2-section column and black steel base for maximum rigidity and a long lifespan. Use it for capturing those trickier, hard-to-capture shots, and easily store it in you kitbag when you're not using it. One of the highlights is the 60cm maximum footprint, which will keep you equipment stable on rougher terrain. Packaged as two sections with a riser, this stand is incredibly easy to set up and put away in your kit. With a flexible 6.4mm and 9.5mm screw, and a 16mm stud, you can use it with an extensive range of equipment. Enjoy more shooting freedom, and easily attach fixtures at ground level or via the pole, which is included in this pack. This backlight photo stand is also remarkably compact when closed, measuring just 48cm in it's smallest position. When fully opened, it extends to an impressive 85cm, yet you can compose from as low as 9cm when required. Look forward to more creative control at every moment. Take your skills to a whole new level and never let anything get in the way of that perfect shot.

Manfrotto 008BUAC Cine Air-Cushioned Stand with Leveling Leg

Manfrotto 008BUAC (008-BUAC, 008/BUAC, 008_BUAC, 008 BUAC, 008buac) Cine Air-Cushioned Stand with Leveling Leg The two-section, black Manfrotto Alu Cine Air-Cushioned Stand with Leveling Leg rises to a height of 7' and can support up to 6.6 lb at maximum extension. It has a leveling leg which extends and locks, adding stability when it is used on uneven terrain or stairs. The stand folds down to 44" in length, weighs 11.4 lb, and has a combo 1-1/8" receiver and 5/8" stud with 3/8"-16 male thread.

Manfrotto 008BU Aluminium 2-Section Stand Black

Manfrotto 008BU (008-BU, 008/BU, 008_BU, 008 BU, 008bu) Aluminium 2-Section Stand Black The adaptable, robust and portable cine stand. Everything you need for any shoot is there with this super-clever Cine Stand. It’s made for both location and studio shoots, so you can be sure you've got the right stand for the job, regardless of what’s needed on the day. Not only that, it’s made for professionals on-the-go, with a lightweight design that makes it an easy piece of kit to carry around. Other great features include smart double leg bracing, giving you ultimate stability when you're set-up, so you'll never have to worry about you gear slipping at the crucial moment. Despite being light enough to transport without any bother, it’s heavy-lifting too. It can support up to 15kgs, so you're really can be sure this stand is up to the challenge, whatever the shoot demands. To make life even easier, this must-have cine stand includes universal head type 14 for total adaptability, plus a 28mm socket and a 16mm stud. This gives you everything you need in one neat package. Adding to it's portability, it can be folded away when not in use too, thanks to a 2-section design plus riser, while a levelling leg enables you to get a firm footing, whatever the terrain.

Manfrotto 007CSU Steel Senior Stand

Manfrotto 007CSU (007-CSU, 007/CSU, 007_CSU, 007 CSU, 007csu) Steel Senior Stand Ergonomically designed for heavy equipment. Our black Steel Senior Stand is for photographers who demand stable lighting wherever they shoot. This stand includes cleverly designed self-lock collars and a 3-section stand that remains firmly locked at the specified height. The strong chrome-plated steel legs include 2 section risers for reaching the desired height. Better still, this stand can handle a payload of up to 20kg, so don't be afraid to use it with some of your heavier lighting gear! Set up the stand in seconds, quickly raise or reduce the height, and level it firmly even on uneven terrain thanks to the sturdy levelling leg (included). Another great feature is the universal head type 14 with a 28mm socket and 16mm stud, which are compatible with a wide range of equipment. Compose your photos in your unique style and never let anything get in the way of that perfect shot. Compatible wheel sets: 109, 110, 110G.

Manfrotto 007BUAC Air Cushioned Aluminium Senior Stand, Black

Manfrotto 007BUAC (007-BUAC, 007/BUAC, 007_BUAC, 007 BUAC, 007buac) Air Cushioned Aluminium Senior Stand, Black Heavy-duty, dependable, and portable, the Black Air Cushioned Senior Stand is ideal for on-the-go photographers. Lightweight, yet able to withstand heavy payloads, it gets the job done with great efficiency. Featuring 3 sections with 2 risers, the intuitive self-locking collars ensure that your stand will stay put at you desired height without hassle. Extending to a maximum height of 315cm, it is ideal for capturing a wide range of shots. Weighing a mere 3kg, it is capable of safely supporting a maximum payload of 12 kg, and it folds away to 122cm when closed for easily portability. Set up quickly without catching you gear or fingers thanks to the air-cushioned parts. Extremely easy to raise and to lower, you'll be able to smoothly adjust the stand’s height without any fuss. This stand includes a universal head type 14 with a 28mm socket with a 16mm for added versatility. It also features a levelling leg for stable shooting in a variety of environments. Take it with you and take you practice to the next level. Designed in Italy with the highest standard of quality, this stand was made to withstand the tests of time and function like new throughout it's long lifespan.

Manfrotto 007BSU Black Chrome Plated 3-Section Steel Stand

Manfrotto 007BSU (007-BSU, 007/BSU, 007_BSU, 007 BSU, 007bsu) Black Chrome Plated 3-Section Steel Stand Heavy-duty, dependable, and secure, the Steel Senior Stand is a powerful tool for photographers and videographers using high-end equipment. Designed to withstand the heaviest of payloads, it's the ideal lighting stand for professionals looking to protect their gear and get the job done with efficiency. Featuring 3 sections with 2 risers, the intuitive self-locking collars ensure that you photo stand will stay put at your desired height without hassle. This means that the legs won't lose their grip and slide during shooting, saving you time and energy. Extending to a maximum height of 325cm, it is ideal for capturing a wide range of shots. Weighing 7.3kg and capable of safely supporting an impressive a maximum payload of 20kg, it folds away to 122cm so it can be neatly stored away when not in use. Including a universal head type 14 with a 28mm socket with a 16mm, you can use it with a variety of equipment for great versatility. It also features a levelling leg for stable shooting in a variety of environments. Take it with you and take you practice to the next level. Designed in Italy with the highest standard of quality, this stand was made to withstand the tests of time and function like new throughout it's long lifespan.

Manfrotto MVKBFRTC-LIVE Befree Live Carbon Fibre Tripod Twist With Video Head

Manfrotto MVKBFRTC-LIVE (MVKBFRTC/LIVE, MVKBFRTC_LIVE, MVKBFRTC LIVE, MVKBFRTCLIVE, mvkbfrtc-live) Befree Live Carbon Fibre Tripod Twist With Video Head ''Manfrotto’s Befree Live Carbon is the most portable travel video tripod kit , dedicated to hobbyist videographers and vloggers who want extremely lightweight , high-end support that ensures maximum performance when they are on the go . Shooting astonishing outdoor videos becomes an easy and enjoyable job thanks to its compact size and minimal weight (just 1,38kg/3.04lbs). The aim of Befree live carbon is to fulfil an increasing demand from independent content creators for a lightweight, ergonomic travel tripod that is easy to carry for video recording with DSLRs, compact system cameras or small camcorders. It features a lightweight tripod spider developed to keep cameras perfectly stable on all types of terrain, including the most uneven ones, always keeping the camera completely steady and ready to capture amazing video footage. This model features the new locking system called the M-lock , the new twist lock developed by Manfrotto to satisfy anyone looking for a fast, easy to use, compact solution . Moreover, the M-Lock has no protruding parts, and its mechanism closes perfectly around the head, enabling the Befree Live to slip into and out of its storage pocket effortlessly. Its ergonomic leg-angle selector is designed to be used by both right and left-handed videographers, enabling everyone to change shooting perspectives intuitively and to find the right tripod height without losing focus on the shot they want to achieve. The Befree Live carbon can easily be set to three independent leg angle positions, guaranteeing full shooting versatility for all the creative ideas that can emerge outdoors. The solid yet lightweight spider featured on this innovative model also has the Easy Link , just like Manfrotto’s professional 190 & 055 tripods. This allows videographers to enhance their creativity by adding accessories that make their footage unique and unforgettable. If you like, adding lights or reflectors, you can now capture amazing outdoor footage that was previously only achievable with heavily accessorized tripods. The Befree Live carbon’s small size does compromise sturdiness or image quality. The carbon fibre legs are developed to cut weight down to an absolute minimum while ensuring best-in-class stability and rigidity that guarantees very smooth movements to match the Befree Live Fluid Head (MVH400AH) , which features a fluid drag system on pan and tilt and keeps your camera perfectly balanced thanks to its sliding video plate. Easy to use and set up, the Befree Live Fluid Head has two intuitive on/off knobs that lock and unlock the head’s pan and tilt movements separately. This lightweight carbon travel video tripod is the optimal combination of portability, solidity, easy set-up and operation. It is built to allow videographers to express their creative nature using their camera with the confidence of being supported by a professional solution they can rely on. Befree Live is available also in aluminium.

Manfrotto MVH502A-546BK-1 Fluid Video Head Aluminium Tripod With Sliding Plate

Manfrotto MVH502A-546BK-1 (MVH502A/546BK/1, MVH502A_546BK_1, MVH502A546BK1, MVH502A,546BK-1, mvh502a-546bk-1) Fluid Video Head Aluminium Tripod With Sliding Plate Have total freedom to capture the perfect shot. The ingenious Professional Fluid Video System, Aluminium with Sliding Plate makes your job even easier, thanks to its long list of intuitive design features and high-functioning capabilities. This clever tripod with fluid video head gives you professional quality pan and tilt, extra easy set up, and the freedom to collapse and tidy away into a neat, compact package when you’re done. This clever piece of kit consists of a fluid video head, and a pro video tripod with a mid-level spreader, giving you everything you need in one box. The mount features a 75mm half ball, so you’ll be able to get into the perfect position in a jiffy. Versatile and smart, this tripod with fluid video head can even support wider HDSLR and interchangeable lens cameras. The fluid drag system counterbalances loads up to 4kg, but it’s capable of holding normal loads up to 7kg, so you’ll never have to worry about wobbling from one angle to the next, whatever equipment you’re using. Linking your photo head to accessories like external monitors, lights and microphones is a doddle too. Two easy link connectors give you the flexibility to attach whatever the job demands. And when the mount is up, it’s totally secure. It can support up to 20kg, making it super strong, all down to its die cast aluminium crown, and rigid two-stage design. The legs lock firmly in place at just a flick of a handle, spiked rubber feet and rubber overshoes keep a steady grip even on tricky terrain, and it’s versatile enough to pair with a number of different dollies.

Manfrotto MVGBF-CF Fast GimBoom Carbon Fibre

Manfrotto MVGBF-CF (MVGBF/CF, MVGBF CF, MVGBF_CF, MVGBFCF, mvgbf-cf) Fast GimBoom Carbon Fibre GimBoom is the revolutionary new FAST boom developed by Manfrotto with universal fitting for your Gimbal. From ground level to overhead position (drone perspective), the new Manfrotto GimBoom allows you to get more versatile and flexible use from your Gimbal, raising your production values to the next level. Thanks to its standard 3/8” and 1/4” top attachment screw, the GimBoom guarantees an easy connection with your Gimbal. It’s exceptionally compact (hand baggage size with 51cm minimum operating height) and lightweight (800g.) And, thanks to its carbon-fibre construction - capable of taking a payload of 6.5 kg at maximum extension - the GimBoom is also incredibly strong. The unique FAST Twisting Lock makes it quick and simple to deploy and extend, allowing the user to control the entire boom with a single gesture. With two risers and three telescopic sections, the full extended length is more than double (1.15m/45.27in) the minimum operating length (0.51m/20.07in), while the intuitive graphic design means locking and unlocking the boom have never been easier. Three thread connectors arranged at 120° on the top of the middle section enable the GimBoom to pair with dedicated GimBoom accessories, with a handy rubber cap to avoid damage when placing it on the ground.

Manfrotto MTPIXIEVO-WH PIXI EVO 2-Section Mini Tripod (White)

Manfrotto MTPIXIEVO-WH (MTPIXIEVO/WH, MTPIXIEVO_WH, MTPIXIEVO WH, MTPIXIEVOWH, mtpixievo-wh) PIXI EVO 2-Section Mini Tripod (White) A wide range of shooting options for the mobile photographer. The PIXI EVO 2-Section Mini Tripod is compact enough to carry with you and offers diverse framing possibilities for your photographer work. Extremely lightweight and compact, the PIXI EVo 2-Section Mini Tripod is perfect for transportation. Combined with its sturdy aluminium structure, and you've got a reliable piece of equipment you can count on throughout your photography career. The kit also boasts two different leg angles complete with sliding selector. Additional features include the two-section legs that can be adjusted in five simple steps. This will improve your stability on uneven surfaces. You're sure to maintain that perfect shot thanks to this innovative technology. When looking for the right angle, the PIXI EVO 2-Section Mini Tripod is made to help. The camera can tilt to a full 90°, ideal for taking your pictures and recordings in portrait mode. Developed for entry-level DSLRs, this kit supports a wide range of devices up to 2.5Kg. This wide range compatibility gives you the freedom to use cameras and accessories of your choice. This choice is also available to you in terms of colour. The PIXI EVO 2-Section Mini Tripod comes in white, black and red-anthracite.

Manfrotto MTALUVR Virtual Reality Aluminium 4-Section Tripod

Manfrotto MTALUVR (MTALU-VR, MTALU/VR, MTALU_VR, MTALU VR, mtaluvr) Virtual Reality Aluminium 4-Section Tripod The VR Big Aluminium Base is the partner of choice for 360° photographers and videographers. It combines professional performance with minimalist design. This compact, robust aluminium tripod is perfect for use with the VR Medium Aluminium extension boom MBOOMAVR (not included) and comes with a specially designed aluminium adapter to connect the MBOOMAVR extension laterally and achieve maximum stability, even when you need to get several meters off the ground. The tripod has aluminium legs equipped with the M-lock system - a fast twist-locking mechanism that secures and releases the leg sections - enabling the tripod to be set up in seconds and letting photographers concentrate on the shots they want to capture. The M-lock can be engaged or disengaged with a single 90° rotation movement. The tripod has 4 independent leg-angle positions for increasing footprint, enabling the base to ensure maximum stability when the 360° camera needs to be high above the ground.

Manfrotto MT290XTC3 290 XTRA CARBON CF 3 Section Tripod

Manfrotto MT290XTC3 (MT-290-XTC3, MT/290/XTC3, MT_290_XTC3, MT 290 XTC3, mt290xtc3) 290 XTRA CARBON CF 3 Section Tripod Work creatively with total control. The 290 Xtra Carbon Fibre Tripod is designed for professionals or hobbyists looking for a reliable, user-friendly and high functioning photo tripod. This is a must-have in any kitbag offering superior features, and total convenience from set-up right through to the end of the shoot. And because it’s both lightweight and collapsible, you can easily dismantle it and pack it away when you're finished. It’s also the biggest in the 290 range, so it’s perfect for carrying heavy equipment. One of this tripods’s standout features has to be it's lightweight carbon composite legs. Apart from making this an easy-to-carry piece of kit, the use of carbon composite means that the legs stay totally rigid when up, so you won't have to worry about them buckling under pressure, or vibrating when you're working to catch that perfect shot. There are 3 legs to this stand, which can be easily folded down when not in use, and speedily put up when you're starting the shoot. To combat any signs of wear and tear, the durable, tension-adjustable magnesium leg locks can be tightened as required, extending the stand’s lifespan even further. Getting started is a doddle too. you simply screw the monopod directly onto the tripod mount beneath your camera, and adapt for other gear as required with the handy, universal 6.35mm and 9.5mm attachments.

Manfrotto MSQ6 Q6 Top Lock Quick Release Adaptor, Complete With Plate

Manfrotto MSQ6 (MS-Q6, MS/Q6, MS_Q6, MS Q6, msq6) Q6 Top Lock Quick Release Adaptor, Complete With Plate This adaptor allows you to fit the Manfrotto Q6 Top Lock quick release system to an existing photo head. The Top Lock system has been developed to offer photographers a fast, easy to use and very secure camera quick release mechanism suitable for heavy pro equipment. The camera plate clicks into the clamp from above, and as soon as it engages, it triggers a safety pin that stops the plate and camera from sliding out accidentally. Even before the clamp is locked, the camera is securely supported. Made from lightweight aluminum, the clamp has 3 bubble spirit levels (one for each axis of rotation) to facilitate precise framing and help produce straight images in-camera, ensuring the camera's full frame is usable and reducing post-production time. A Q6 Arca-compatible plate is supplied with the adaptor. Spare plates can be purchased separately. This adapter is compatible with the following Manfrotto heads: MH054M0, MH054M0-Q2, MH054M0-Q5 MH055M0, MH055M0-Q2, MH055M0-Q5, MH055M0-RC4 MH057M0, MH057M0-Q5, MH057M0-RC4 468MG, 468MGRC0, 468MGRC2, 468MGRC3, 468MGRC4, 468MGRC5 MHXPRO-BHQ2

Manfrotto MS050M4-RC4 L Bracket RC4

Manfrotto MS050M4-RC4 (MS050M4/RC4, MS050M4_RC4, MS050M4 RC4, MS050M4RC4, ms050m4-rc4) L Bracket RC4 The Manfrotto L bracket is a unique accessory designed for all the professional photographer who would like to change photo formats in an easy and fast way by quickly flipping the camera from horizontal to vertical position. Manfrotto L Bracket combines lightness with maximum support. The magnesium structure provides a sturdy solution in terms of stability, lightweight, and transportability for all types of equipment. Special anti-rotational systems perfectly fit around the camera body guaranteeing a strong and firm grip keeping stable any heavy professional equipment. This accessory helps to extend the vertical and horizontal range of movement, keeping the camera’s weight centered over the tripod and avoiding lens movement when flipping from landscape to portrait position. The L Bracket is adaptable to different models of camera body maintaining high level of precision and ergonomics. The RC4 quick release based on the 410PL plate provides a quick and stable lock for heavy equipment thanks to the large contact area.

Manfrotto MS050M4-Q5 L Bracket Q5

Manfrotto MS050M4-Q5 (MS050M4/Q5, MS050M4_Q5, MS050M4 Q5, MS050M4Q5, ms050m4-q5) L Bracket Q5 The Manfrotto L bracket is a unique accessory designed for all the professional photographer who would like to change photo formats in an easy and fast way by quickly flipping the camera from horizontal to vertical position. Manfrotto L Bracket combines lightness with maximum support. The magnesium structure provides a sturdy solution in terms of stability, lightweight, and transportability for all types of equipment. Special anti-rotational systems perfectly fit around the camera body guaranteeing a strong and firm grip keeping stable any heavy professional equipment. This accessory helps to extend the vertical and horizontal range of movement, keeping the camera’s weight centered over the tripod and avoiding lens movement when flipping from landscape to portrait position. The L Bracket is adaptable to different models of camera body maintaining high level of precision and ergonomics. The Q5 quick release based on the 501PL plate provides a perfect weight balance for heavy equipment.

Manfrotto MS050M4-Q2 L Bracket Q2

Manfrotto MS050M4-Q2 (MS050M4/Q2, MS050M4_Q2, MS050M4 Q2, MS050M4Q2, ms050m4-q2) L Bracket Q2 The Manfrotto L bracket is a unique accessory designed for all the professional photographer who would like to change photo formats in an easy and fast way by quickly flipping the camera from horizontal to vertical position. Manfrotto L Bracket combines lightness with maximum support. The magnesium structure provides a sturdy solution in terms of stability, lightweight, and transportability for all types of equipment. Special anti-rotational systems perfectly fit around the camera body guaranteeing a strong and firm grip keeping stable any heavy professional equipment. This accessory helps to extend the vertical and horizontal range of movement, keeping the camera’s weight centered over the tripod and avoiding lens movement when flipping from landscape to portrait position. The L Bracket is adaptable to different models of camera body maintaining high level of precision and ergonomics. The Q2 quick release based on the 200PL-14 plate offers increased ergonomics, speed and reduced weight.

Manfrotto MPMXPROC4 XPRO 4-Section CF Monopod with Quick Power

Manfrotto MPMXPROC4 (MPM-XPRO-C4, MPM/XPRO/C4, MPM_XPRO_C4, MPM XPRO C4, mpmxproc4) XPRO 4-Section CF Monopod with Quick Power The new 4-section XPRO Monopod is a professional carbon fibre monopod made to satisfy photographers who leverage the height of their monopod to get above crowds and to achieve a wide range of shooting angles. When paired with the  234RC photo monopod head and a camera, the shooting experience is enhanced and framing speed and versatility increase dramatically. It is the perfect combination of performance and portability: easy to carry while quickly moving from one shooting spot to another, with the tremendous stiffness and solidity of carbon fibre legs. This monopod is compatible with Manfrotto’s full fluid base (MVMXPROBASE) and allows you to transform your photo monopod into a professional full fluid video monopod. The innovative FLUIDTECH solution allows for a 3D fluid movement – on pan, tilt and swivel, with a pioneering technology based on a spherical system located inside the base which deliver ultimate smoothness through an expanded range of perspectives. The three retractable feet make it extremely portable when folded and allow the monopod to be easily carried everywhere. The MVMXPROBASE can be attached to the XPRO Photo Monopod+ by unscrewing the foot at the bottom of the monopod and convert the photo monopod to a video one for smooth video footage. The MVMXPROBASE is compatible with all XPRO Photo Monopods+, but the MMXPROA3B. The MPMXPROC4 is a 4-section lightweight photo camera monopod that supports up to 7kg and weighs a mere 0.6kg. Its 100% carbon fibre legs ensure the monopod’s supreme rigidity and high absorption of micro movements for excellent image quality. Combined with the Quick Power Lock (QPL), which strongly locks the lever thanks to an easy ergonomic mechanism, it eliminates unwanted jerky movements. Thanks to the newly designed leg warmer which provides exceptional grip and the dual 1/4'' - 3/8'' photo camera fixing screw, this new generation of monopods is handier, faster and more versatile out in the field. The MPMXPROC4 replaces the Manfrotto 694CX.

Manfrotto MKELMII4BL-BH Element MII Aluminium Blue

Manfrotto MKELMII4BL-BH (MKELMII4BL/BH, MKELMII4BL_BH, MKELMII4BL BH, MKELMII4BLBH, mkelmii4bl-bh) Element MII Aluminium Blue Perfect for hobbyist and aspiring photographers who use compact cameras, CSCs and DSLRs cameras Manfrotto Element MII Aluminium Blue is lightweight on your shoulders and stable on the ground. The Element MII Collection is the evolution of the Element Big range. Element MII, which stands for both MADE IN ITALY and MARK 2, offers high quality, flawless construction, stylish design, and several exciting upgrades and valuable features. Ultra-compact, lightweight and reliable, the Element MII Aluminium Blue delivers superior construction and must-have features and it is ideal for setting your creativity free on the go. It reaches up to 160 cm, folds down to 42.5 cm and weighs only 1,55 kg. The Element MII Aluminium Blue carries a payload of up to 8kg, which means it is also suitable for heavier zoom lenses where a sturdy tripod is essential for crisp photos. The aluminium ball head enables Element MII users to enjoy the smoothest movement for framing their shots and firmly locks gear in place. It features a dual-lock design with a large primary knob for controlling the ball’s movement and a smaller secondary knob for engaging the 360° independent pan. The head comes with an included high-quality techno polymer 200PL-PRO Light plate is both strong and lightweight and compatible with Arca-type and Manfrotto RC2 head attachments. Its rubber inserts grip tightly, even on the most angled shots. The sturdy aluminium spider consistently delivers exceptional stability and reliability in the field. Its ingenious core keeps size to a minimum by housing the patented leg angle selectors, which allow quick leg angle switching for rapid and accurate camera positioning. The rapid leg opening system and ergonomic twist-locks firmly lock the legs into position, allowing instant set up and keeping your attention on the shot. Photographers can rely on the hook located at the bottom of the centre column to add additional weight for extra stability when needed. The vibrant, eye-catching colours and graphics make these model perfect for expressing your individuality. Element MII Aluminium Blue easily follows you everywhere and is always comfortable to carry thanks to its padded carry bag.

Manfrotto MKELMII4BK-BH Element MII Aluminium Black

Manfrotto MKELMII4BK-BH (MKELMII4BK/BH, MKELMII4BK_BH, MKELMII4BK BH, MKELMII4BKBH, mkelmii4bk-bh) Element MII Aluminium Black Perfect for hobbyist and aspiring photographers who use compact cameras, CSCs and DSLRs cameras Manfrotto Element MII Aluminium Black is lightweight on your shoulders and stable on the ground. The Element MII Collection is the evolution of the Element Big range. Element MII, which stands for both MADE IN ITALY and MARK 2, offers high quality, flawless construction, stylish design, and several exciting upgrades and valuable features. Ultra-compact, lightweight and reliable, the Element MII Aluminium Black delivers superior construction and must-have features and it is ideal for setting your creativity free on the go. It reaches up to 160 cm, folds down to 42,5 cm and weighs only 1,55 kg. The Element MII Aluminium Black carries a payload of up to 8kg, which means it is also suitable for heavier zoom lenses where a sturdy tripod is essential for crisp photos. The aluminium ball head enables Element MII users to enjoy the smoothest movement for framing their shots and firmly locks gear in place. It features a dual-lock design with a large primary knob for controlling the ball’s movement and a smaller secondary knob for engaging the 360° independent pan. The head comes with an included high-quality techno polymer 200PL-PRO Light plate is both strong and lightweight and compatible with Arca-type and Manfrotto RC2 head attachments. Its rubber inserts grip tightly, even on the most angled shots. The sturdy aluminium spider consistently delivers exceptional stability and reliability in the field. Its ingenious core keeps size to a minimum by housing the patented leg angle selectors, which allow quick leg angle switching for rapid and accurate camera positioning. The rapid leg opening system and ergonomic twist-locks firmly lock the legs into position, allowing instant set up and keeping your attention on the shot. Photographers can rely on the hook located at the bottom of the centre column to add additional weight for extra stability when needed. The vibrant, eye-catching colours and graphics make these model perfect for expressing your individuality. Element MII Aluminium Black easily follows you everywhere and is always comfortable to carry thanks to its padded carry bag.

Manfrotto MKCONVR Virtual Reality Kit W/ Pixi Evo And Aluminium Extension

Manfrotto MKCONVR (MKCON-VR, MKCON/VR, MKCON_VR, MKCON VR, mkconvr) Virtual Reality Kit W/ Pixi Evo And Aluminium Extension The Manfrotto PIXI EVO kit is designed to support small 360° cameras. The kit consists of a specially adapted version of the PIXI EVO and a 4-section aluminium pole with a ¼ male thread to attach a camera. The pole can also be detached from the base and used as a selfie stick. For further technical details and complete payload range, check the specifications and instruction manual in the download area.

Manfrotto MKBFRTC4GT-BH Befree GT Carbon Fibre Tripod Twist Lock with Ball Head

Manfrotto MKBFRTC4GT-BH (MKBFRTC4GT/BH, MKBFRTC4GT_BH, MKBFRTC4GTBH, MKBFRTC4GT BH, mkbfrtc4gt-bh) Befree GT Carbon Fibre Tripod Twist Lock with Ball Head Manfrotto’s Befree GT carbon travel tripod and ball head kit is the ideal solution for professional photographers who need superior performance in the most lightweight format. Befree GT is the most professionally advanced solution in Manfrotto’s wide range of Travel Tripods. It is the perfect combination of portability - only 43cm/16.93in when folded - and impressive stability, ensuring flawless and effortless operation even with a 10kg/22.03lbs equipment load. Its ergonomic design makes operating the Manfrotto Befree GT comfortable, fast and secure, enabling even the most demanding photographers to set their equipment up quickly and easily so their focus stays on catching the perfect shot. Befree GT features a new solid spider developed to ensure maximum stability on all types of terrain, including the most uneven ones, always keeping the camera completely steady and ready to capture the sharpest images. It features the M-lock, the new twist lock developed by Manfrotto to satisfy anyone looking for a fast, easy to use, compact solution. Moreover, the M-Lock has no protruding parts and its mechanism closes perfectly around the head, enabling the Befree GT to slip into and out of its storage pocket effortlessly. Its ergonomic leg-angle selector is designed to be used smoothly by both right and left-handed photographers, enabling everyone to change shooting perspectives intuitively and to find the right tripod setting without losing focus on the shot they want. The Befree GT can easily be set to three independent leg angle positions, guaranteeing full shooting versatility for all the creative ideas that can emerge outdoors. The spider featured on this innovative model also has an Easy Link, just like Manfrotto’s professional 190 & 055 tripods, allowing photographers to enhance their creativity by adding accessories that make their images unique and unforgettable. If you like, adding lights or reflectors, you can now capture amazing outdoor shots that were previously only achievable with heavy accessorised tripods. This tripod is kitted out with Manfrotto’s advanced 496 aluminium Centre ball head (MH496-BH) , a portable yet powerful and intuitive head that allows smooth and precise camera movement. This advanced ball head combines practicality with high performance and features three independent controls that give it the versatility to suit any environment. A main ergonomic knob manages the sphere lock, an integrated friction control knob adjusts the ball tension so that equipment weight is always perfectly balanced and shots framed effortlessly; an independent panoramic knob keeps the horizon flat and moves the camera horizontally, enabling astonishing landscape shots. Framing on the 496 is easier and opens limitless options, so you can pursue any angle you can think of. The head mounts a unique plate that makes it fully compatible with the world’s most widespread standard head attachments: Manfrotto RC2 and Arca-swiss style. With this aluminium plate fixed to the camera, all Manfrotto heads and almost all tripod heads on the market featuring Arca-swiss style attachments can be set up rapidly and effortlessly, with no need for disassembly components. Befree GT is the best professional travel tripod for all photographers who want maximum performance, even when they’re travelling. This sturdy yet lightweight travel tripod is the optimal combination of solidity, portability, easy set up and operation. It is built to allow photographers to express their individuality and achieve the most daring and exceptional shots using their camera with the confidence of being supported by a professional solution that will never let them down.

Manfrotto MKBFRTA4GT-BH Befree GT Aluminum Tripod Twist Lock With Ball Head

Manfrotto MKBFRTA4GT-BH (MKBFRTA4GT/BH, MKBFRTA4GT_BH, MKBFRTA4GT BH, MKBFRTA4GTBH, mkbfrta4gt-bh) Befree GT Aluminum Tripod Twist Lock With Ball Head Manfrotto’s Befree GT aluminium travel tripod and ball head kit is the ideal solution for professional photographers who need superior performance when they’re travelling. Befree GT is the most professionally advanced solution in Manfrotto’s wide range of Travel Tripods. It is the perfect combination of portability - only 43cm/16.93in when folded - and impressive stability, ensuring flawless and effortless operation even with a 10kg/22.03lbs equipment load. Its ergonomic design makes operating the Manfrotto Befree GT comfortable, fast and secure, enabling even the most demanding photographers to set their equipment up quickly and easily so their focus stays on catching the perfect shot. Befree GT features a new solid spider developed to ensure maximum stability on all types of terrain, including the most uneven ones, always keeping the camera completely steady and ready to capture the sharpest images. It features the M-lock, the new twist lock developed by Manfrotto to satisfy anyone looking for a fast, easy to use, compact solution. Moreover, the M-Lock has no protruding parts and its mechanism closes perfectly around the head, enabling the Befree GT to slip into and out of its storage pocket effortlessly. Its ergonomic leg-angle selector is designed to be used smoothly by both right and left-handed photographers, enabling everyone to change shooting perspectives intuitively and to find the right tripod setting without losing focus on the shot they want. The Befree GT can easily be set to three independent leg angle positions, guaranteeing full shooting versatility for all the creative ideas that can emerge outdoors. The spider featured on this innovative model also has an Easy Link, just like Manfrotto’s professional 190 & 055 tripods, allowing photographers to enhance their creativity by adding accessories that make their images unique and unforgettable. If you like, adding lights or reflectors, you can now capture amazing outdoor shots that were previously only achievable with heavy accessorised tripods. This tripod is kitted out with Manfrotto’s advanced 496 aluminium Centre ball head (MH496-BH), a portable yet powerful and intuitive head that allows smooth and precise camera movement. This advanced ball head combines practicality with high performance and features three independent controls that give it the versatility to suit any environment. A main ergonomic knob manages the sphere lock, an integrated friction control knob adjusts the ball tension so that equipment weight is always perfectly balanced and shots framed effortlessly; an independent panoramic knob keeps the horizon flat and moves the camera horizontally, enabling astonishing landscape shots. Framing on the 496 is easier and opens limitless options, so you can pursue any angle you can think of. The head mounts a unique plate that makes it fully compatible with the world’s most widespread standard head attachments: Manfrotto RC2 and Arca-swiss style. With this aluminium plate fixed to the camera, all Manfrotto heads and almost all tripod heads on the market featuring Arca-swiss style attachments can be set up rapidly and effortlessly, with no need for disassembly components. Befree GT is the best professional travel tripod for all photographers who want maximum performance, even when they’re travelling. This sturdy yet lightweight travel tripod is the optimal combination of solidity, portability, easy set up and operation. It is built to enable photographers to express their uniqueness and to achieve the most daring and exceptional shots using their camera with the confidence of being supported by a professional solution that will never let them down. The Befree GT Aluminium Travel Tripod Twist, ball head kit is also available in carbon fibre.

Manfrotto MKBFRTA4BK-BH Befree Advanced Aluminum Travel Tripod Twist With Ball Head

Manfrotto MKBFRTA4BK-BH (MKBFRTA4BK/BH, MKBFRTA4BK_BH, MKBFRTA4BKBH, MKBFRTA4BK BH, mkbfrta4bk-bh) Befree Advanced Aluminum Travel Tripod Twist With Ball Head Manfrotto’s Befree advanced Twist aluminium travel tripod and ball head kit is the ideal solution for advanced hobbyist photographers who always want maximum performance, including when they’re travelling. Its ergonomic design makes operating the Manfrotto Befree advanced intuitive and fast, enabling even the most demanding photographers to set their equipment up quickly and easily so their focus stays on catching the desired shot. Befree advanced features a new spider developed to ensure perfect stability on all types of terrain, including the most uneven, always keeping the camera completely steady and ready to capture sharp images. This model introduces a new locking system called the M-lock, the new twist lock developed by Manfrotto to fully satisfy everyone looking for a fast, easy to use, compact solution. Moreover, the M-Lock has no protruding parts and its mechanism closes perfectly around the head, enabling the Befree advanced can slip into and out of its storage pocket effortlessly. Its ergonomic leg-angle selector is designed to be used by both right and left-handed photographers, enabling everyone to change shooting perspectives intuitively and to find the right tripod height without losing focus on the shot they want. The Befree advanced can easily be set to three independent leg angle positions, guaranteeing full shooting versatility for all the creative ideas that can emerge outdoors. The spider featured on this innovative model also provides the Easy Link, just like Manfrotto’s professional 190 & 055 tripods, allowing photographers to enhance their creativity by adding accessories that make their images unique and unforgettable. If you like adding lights or reflectors, you can now capture amazing outdoor shots that were previously only achievable with heavy accessorized tripods. The tripod is kitted out with Manfrotto’s Advanced 494 aluminium Center ball head, a small but powerful and intuitive head that allows quick and precise camera movement. The 494 Center ball head features three independent controls: a main knob for managing the sphere lock, an integrated friction control knob that adjusts the ball tension so that equipment weight is always perfectly balanced and shots framed effortlessly; an independent panoramic knob that keeps the horizon flat and moves the camera horizontally, enabling astonishing landscape shots. The head mounts a unique plate that makes it fully compatible with the world’s most widespread standard head attachments: Manfrotto RC2 and Arca-swiss style. With this aluminium plate fixed to the camera, all Manfrotto heads and almost all tripod heads on the market featuring Arca-swiss style attachments can be set up rapidly and effortlessly, with no need for disassembly components.< Befree advanced is the best travel tripod for passionate photographers who want maximum performance, even when they’re travelling. This lightweight travel tripod is the optimal combination of portability, solidity, easy set-up and operation. It is built with the unique goal of enabling individuals to express their nature using their camera with the confidence of being supported by a professional solution. The Befree advanced Aluminium Travel Tripod Twist, ball head kit is available in black, red and blue.

Manfrotto MKBFRLA4BK-BH Befree Advanced Aluminum Travel Tripod Lever With Ball Head

Manfrotto MKBFRLA4BK-BH (MKBFRLA4BK/BH, MKBFRLA4BK_BH, MKBFRLA4BK BH, MKBFRLA4BKBH, mkbfrla4bk-bh) Befree Advanced Aluminum Travel Tripod Lever With Ball Head The Manfrotto Befree advanced Lever aluminium travel tripod and ball head kit is the ideal solution for advanced hobbyist photographers who want maximum performance and stability at all times - including when they’re travelling. Its ergonomic design makes operating the Manfrotto Befree advanced intuitive and fast, enabling even the most demanding photographers to set their equipment up quickly and easily so their focus stays on catching the desired shot. The Befree advanced features a new pider developed to ensure perfect stability on all types of terrain, including the most uneven, always keeping the camera completely steady and ready to capture sharp images.

Manfrotto MKBFRLA4B-BHM Befree 2N1 Aluminium Tripod Lever With Monopod

Manfrotto MKBFRLA4B-BHM (MKBFRLA4B/BHM, MKBFRLA4B_BHM, MKBFRLA4B BHM, MKBFRLA4BBHM, mkbfrla4b-bhm) Befree 2N1 Aluminium Tripod Lever With Monopod The Manfrotto Befree 2n1 aluminium travel tripod with lever lock and ball head kit is the ideal solution for advanced hobbyist photographers who want versatility and maximum performance combined in one simple solution, ideal for travelling. Its ergonomic design makes operating the Manfrotto Befree 2n1 intuitive and fast, enabling even the most demanding photographers to set their equipment up quickly and easily, so they can completely focus on catching the desired shot. The Befree 2n1 features an integrated full size aluminium monopod that can be easily mounted in a few steps. By simply unlocking the dedicated mechanism on the leg with the leg warmer on, and pulling out the tripod column, the two solid aluminium blocks can be joined together with the dedicated cap screwed under the column. The monopod can easily hold up to 5kg (11 lbs) payload. This model also provides a new locking mechanism called the QPL Travel lever, a brand-new system developed by Manfrotto, that brings the full locking power of the professional QPL lever on professional Manfrotto tripods like the 190 & 055 collections, to a more lightweight version that is ideal for travel. The new on-off mechanism makes set-up and adjustment easy and secure, providing full stability in all its configurations when the tripod is open. The ergonomic leg-angle selector is designed to be used by both right and left-handed photographers, enabling everyone to change shooting perspectives intuitively, and to find the right tripod height without losing focus on the shot they want. The Befree 2n1 can easily be set to three independent leg angle positions, guaranteeing full shooting versatility for all the creative ideas that can emerge outdoors. The spider is developed to ensure perfect stability on all types of terrain, including the most uneven, always keeping the camera completely steady and ready to capture sharp images. It features the Easy Link, just like Manfrotto professional 190 & 055 tripods, allowing photographers to enhance their creativity by adding accessories that make their shot unique and unforgettable. Photographers who love adding lights or reflectors can now take amazing outdoor shots that were previously only achievable with heavy accessorized tripods. The tripod is kitted out with Manfrotto’s Advanced 494 aluminium Center ball head, a small but powerful and intuitive head that allows quick and precise camera movement. The 494 Center ball head features three independent controls: a main knob for managing the sphere lock, an integrated friction control knob that adjusts the ball tension so that equipment weight is always perfectly balanced and shots framed effortlessly; an independent panoramic knob that keeps the horizon flat and moves the camera horizontally, enabling astonishing landscape shots. The head mounts a unique plate that makes it fully compatible with the world’s most widespread standard head attachments: Manfrotto RC2 and Arca-swiss style. With this aluminium plate fixed to the camera, all Manfrotto heads and almost all tripod heads on the market featuring Arca-style attachments can be set up rapidly and effortlessly, with no need for disassembling components. Befree 2n1 is the best travel tripod for passionate photographers who need an all-in-one solution that is perfect for travelling. This lightweight travel tripod is the optimal combination of portability, solidity, easy set-up and operation, and thanks to the detachable legs it allows any photographers to choose the proper support to bring with them, minimizing weight and size. It is built with the unique goal of enabling individuals to express their nature using their camera with the confidence of being supported by a professional solution.

Manfrotto MKBFRLA4BK-3W Befree 3-Way Live Advanced Kit

Manfrotto MKBFRLA4BK-3W (MKBFRLA4BK/3W, MKBFRLA4BK_3W, MKBFRLA4BK 3W, MKBFRLA4BK3W, mkbfrla4bk-3w) Befree 3-Way Live Advanced Kit The Befree 3-Way Live Advanced is an innovative model joining the Manfrotto’s flagship tripod family, Befree Advanced, for travel photography and videography, specifically developed for hobbyist and amateur photographers and videographers who want maximum performance and versatility in an all-in-one compact support. The Befree 3-Way Live Advanced is the first travel tripod kit on the market developed for both photo and video applications. It combines both precision and versatility with innovative and unique features to help photographers and video artists create premium quality video or stills capture. All the users must do is unleash their creativity. The kit consists of the brand-new Manfrotto’s Befree 3-way Live Head kitted out with the successful Befree Advanced aluminium tripod. It fulfils the need of a dual-purpose photo/video camera kit, following the current camera trend and usage, which see new cameras combining high-quality photo performances with a full-frame sensor and 4K video recording and the complementarity of these two worlds in daily use. The Manfrotto’s Befree 3-way Live Head, the innovative Manfrotto’s travel 3-way fluid head, features fully foldable handles for unparalleled compactness, and remarkable sturdiness, carrying a payload of up to 6kg. This pioneering head perfectly meets the customer need of experiencing video and photo applications with only one ultra-versatile support. Featuring the high-performance Befree Fluid Drag System, with its smoothest level of control, both on panoramic and tilt movements, this head is exceptionally easy to fine-tune the composition to frame and film as accurately as possible. The high-performance fluid used represents the latest in Manfrotto’s fluid head technology, built to offer the smoothest level of control and movements and exceptional stability even in extreme temperatures (-30°/ +70°). The long panoramic handle, the portrait position and the 3 bubble levels complete the head, guaranteeing full shooting precision and versatility, to promote creative ideas and stunning outdoor shoots. The tripod head also features the unique 200PL-PRO plate, made of a high-quality aluminium body and fully compatible with Manfrotto RC2 & Arca-Swiss type head attachments: with 2 rubber inserts that maximise grip, even on the most angled shots. Moreover, the head's plate-holder is also compatible with 501PL video plate, to ensure the perfect balance even with longer lenses. The ergonomic design of the kit makes operating the Manfrotto Befree 3-Way Live Advanced intuitive and fast, enabling even the most demanding users to set their equipment up quickly and easily, without losing sight of their desired shot. The spider is developed to ensure perfect stability on all types of terrain, including the most uneven, always keeping the camera completely steady and ready to capture sharp images and smooth videos. The QPL Travel lever leg locking system makes set up and adjustment easy and secure, providing full stability in all configurations when the tripod is open. The ergonomic leg-angle selector is designed to be used by both right and left-handed users, enabling everyone to change shooting perspectives intuitively and find the right tripod height without losing focus on the shot they want to capture. The travel tripod can easily be set to three independent leg angle positions, guaranteeing full shooting versatility for all the creative ideas that can emerge outdoors. The spider featured on this innovative model also provides an Easy Link, just like Manfrotto’s professional 190 & 055 tripods. This allows photographers and videographers to enhance their creativity by adding accessories that make their shot unique and unforgettable. Creative users who love adding lights or reflectors can now take amazing outdoor shots that were previously only achievable with heavy accessorised tripods. Manfrotto Befree 3-Way Live Advanced is the best travel tripod for passionate photographers and videographers who want maximum performance in a lightweight format. It is the optimal combination of portability, solidity, easy set-up and operation. It is built with the unique goal of enabling individuals to express their talent using their camera with the confidence of a superior support solution.

Manfrotto MKBFRLA-3W Befree 3-Way Live Advanced Tripod

Manfrotto MKBFRLA-3W (MKBFRLA/3W, MKBFRLA_3W, MKBFRLA 3W, MKBFRLA3W, mkbfrla-3w) Befree 3-Way Live Advanced Tripod The tripod Befree 3-Way Live Advanced Designed for Sony's Alpha Cameras is an innovative model joining the Manfrotto’s flagship tripod family, Befree Advanced, for travel photography and videography, specifically developed for Sony’s Alpha camera users who want maximum performance and stability in all shooting positions. The Befree 3-Way Live Advanced Designed for Sony’s Alpha Cameras is the first travel tripod kit on the market developed for both photo and video applications. It combines both precision and versatility with innovative and unique features to help photographers and video artists create premium quality video or stills capture. All the users must do is unleash their creativity. This special version features a customised version of the Manfrotto 200PL-PRO camera plate specifically designed to perfectly match Alpha 7 series and Alpha 9* and it is also enriched by an exclusive leg graphic and cinnabar colour details on the head that match Alpha camera design. The kit consists of the brand-new Manfrotto’s Befree 3-way Live Head kitted out with the successful Befree Advanced aluminium tripod. It fulfils the need of a dual-purpose photo/video camera kit, following the current camera trend and usage, which see new cameras combining high-quality photo performances with a full-frame sensor and 4K video recording and the complementarity of these two worlds in daily use. The Manfrotto’s Befree 3-way Live Head, the innovative Manfrotto’s travel 3-way fluid head, features fully foldable handles for unparalleled compactness, and remarkable sturdiness, carrying a payload of up to 6kg. This pioneering head perfectly meets the customer need of experiencing video and photo applications with only one ultra-versatile support. Featuring the high-performance Befree Fluid Drag System, with its smoothest level of control, both on panoramic and tilt movements, this head is exceptionally easy to fine-tune the composition to frame and film as accurately as possible. The high-performance fluid used represents the latest in Manfrotto’s fluid head technology, built to offer the smoothest level of control and movements and exceptional stability even in extreme temperatures (-30°/ +70°). The long panoramic handle, the portrait position and the 3 bubble levels complete the head, guaranteeing full shooting precision and versatility, to promote creative ideas and stunning outdoor shoots. The plate is designed to match Sony Alpha 7 series and Alpha 9 camera bodies*, to ensure perfect grip, even in the most angled camera shots. The front jut of the plate physically blocks the camera, preventing any play both on tilt and rotational movements, always keeping the camera stuck to the head plate. The result is impressive camera stability, which takes image sharpness to the highest level. The plate is also fully compatible with the world’s most widespread standard head attachments: Manfrotto RC2 and Arca-swiss style. With this aluminium plate fixed to the camera, all Manfrotto heads and almost all tripod heads on the market featuring Arca-style attachments can be set up rapidly and effortlessly, without disassembling components. The ergonomic design of the kit makes operating the Manfrotto Befree 3-Way Live Advanced Designed for Sony’s Alpha Cameras intuitive and fast, enabling even the most demanding users to set their equipment up quickly and easily, without losing sight of their desired shot. The spider is developed to ensure perfect stability on all types of terrain, including the most uneven, always keeping the camera completely steady and ready to capture sharp images and smooth videos. The QPL Travel lever leg locking system makes set up and adjustment easy and secure, providing full stability in all configurations when the tripod is open. The ergonomic leg-angle selector is designed to be used by both right and left-handed users, enabling everyone to change shooting perspectives intuitively and find the right tripod height without losing focus on the shot they want to capture. The tripod can easily be set to three independent leg angle positions, guaranteeing full shooting versatility for all the creative ideas that can emerge outdoors. The spider featured on this innovative model also provides an Easy Link, just like Manfrotto’s professional 190 & 055 tripods. This allows photographers and videographers to enhance their creativity by adding accessories that make their shot unique and unforgettable. Creative users who love adding lights or reflectors can now take amazing outdoor shots that were previously only achievable with heavy accessorised tripods. Manfrotto Befree 3-Way Live Advanced Designed for Sony’s Alpha Cameras is . It is the optimal combination of portability, solidity, easy set-up and operation. It is built with the unique goal of enabling individuals to express their talent using their Alpha camera with the confidence of a superior support solution. * All details of camera’s compatibility are available in the Download section

Manfrotto MK290XTA3-BH 290 Xtra Aluminium 3-Section Tripod Kit with Ball Head

Manfrotto MK290XTA3-BH (MK290XTA3/BH, MK290XTA3_BH, MK290XTA3 BH, MK290XTA3BH, mk290xta3-bh) 290 Xtra Aluminium 3-Section Tripod Kit with Ball Head The perfect tripod with head set for new photographers. The 290 Xtra Aluminium 3-Section Tripod Kit with Ball Head has everything you need in one handy bag. Designed to professional standards, this smart tripod with head kit won’t let you down, even during the most challenging situations. And it’s built to last. Fashioned from hard-wearing but lightweight aluminium, it won’t be a chore to carry, and it’s strong when up. The stand comes in 3-sections, with aluminium leg tubes and a specially designed, high-performance top casting that works under pressure, and delivers maximum stability whatever the shoot demands. Added aluminium leg locks keep everything firmly in place and can be adjusted as needed to increase tension, and this function works even after heavy use, extending the stand’s lifespan longer. Not only that, it’s super easy to use too. 4 leg angle positions give you freedom to move, and a centre column allows you to extend your height range. Other great features include rubber leg warmers to give you ultimate grip whatever the weather, and a centre ball head. This makes it a full tripod with head set, and the ball head has a great spherical movement, plus a quick release plate. So you’ll be able to glide from one angle to the next while you work, and set up speedily. That way, you’ll be able to capture new frames quickly and effectively. And it comes with its very own made-to-measure shoulder bag, just to make life even easier. MK290XTA3-BH is supplied with 496RC2 Ball Head

Manfrotto MK290XTA3-3W 290 Xtra Aluminium 3-Section Tripod with Head

Manfrotto MK290XTA3-3W (MK290XTA3/3W, MK290XTA3_3W, MK290XTA3 3W, MK290XTA33W, mk290xta3-3W) 290 Xtra Aluminium 3-Section Tripod with Head The intuitive, incredibly usable tripod with head set for savvy amateurs. You’ll always have everything you need to hand with the 290 Xtra Aluminium 3-Section Tripod Kit with 3-Way Head. Designed to meet the demands of the most challenging shoots, this great tripod with head comes with a shoulder bag for easy transportation, and plenty of standout features to make getting that perfect shot even easier. Designed for photographers just starting out, every part of this set is easy to use. The 3-section tripod is totally rigid thanks to robust but lightweight aluminium leg tubes, with innovative top casting to further enhance durability and performance. The handy leg locking levers are tension adjustable, meaning you can even alter to combat wear and tear, making this stand last longer. And rubber leg warmers give you all the stability you need, whatever the weather or terrain. Once you’re set up, you can shoot from all angles with 4 leg angle positions available, or use the centre column to increase your height range. Plus, this is a full tripod with headset, so you get a 3-way photo head included. This camera head is easy to slot into your bag, with retractable levers to compact it down, and independent controls on all three axes, you’ll never miss a shot. The head is made from technical polymer, making it lightweight and durable, and features an essential quick release plate for extra security and even easier set-up. MK290XTA3-3W is supplied with MH804-3W Head

Manfrotto MHXPRO-BHQ6 XPRO Magnesium Ball Head with Top Lock Plate

Manfrotto MHXPRO-BHQ6 (MHXPRO/BHQ6, MHXPRO_BHQ6, MHXPRO BHQ6, MHXPROBHQ6, mhxpro-bhq6) XPRO Magnesium Ball Head with Top Lock Plate Outstanding performance and security for your camera gear. The Manfrotto XPRO Ball Head, with its stand-out design and innovative technical features, gives you guaranteed security when shooting with heavy camera gear. It has an effective triple locking system to keep your device stable, and three wedges that prevent drift by enclosing and locking the sphere. Look forward to shake-free shots every time you shoot with this tripod head. With two levelling bubbles you can make quick adjustments with the locking knobs open, and keep your camera perfectly balanced with the friction control. Frame and shoot with greater flexibility, and achieve much sharper images that will help you stand out from the crowd. The XPRO Ball Head offers remarkable portability for photographers on the go. It has a sturdy yet lightweight magnesium body that is only 0.52kg. However, it can support a very impressive payload of up to 10kg so you can use it with a wide variety of devices. The new polymer rings also represent a substantial improvement on previous versions, and ensure smoother, more accurate camera movement without unpleasant grease. For a fast, effortless setup, this camera is inserted from above rather than from the side. A safety mechanism is released when the plate engages with the clamp, which prevents your equipment from falling and becoming damaged. The Manfrotto XPRO Ball Head includes an innovative Arca-Swiss-compatible MSQ6PL plate and a Top Lock, and has been manufactured to high standards in Italy.

Manfrotto MHXPRO-3WG XPRO Geared Three-way Pan/Tilt Tripod Head

Manfrotto MHXPRO-3WG (MHXPRO/3WG, MHXPRO_3WG, MHXPRO3WG, MHXPRO 3WG, mhxpro-3wg) XPRO Geared Three-way Pan/Tilt Tripod Head For photographers looking for nothing less than precision. The highly portable XPRO Geared Three-way pan/tilt Head has the lightest and most precise body in the Manfrotto range. Rigid and strong, it features micrometric knobs so you can position your camera in the desired position in just seconds. With a payload of up to 4kg and a head weighing only 0.75kg, you benefit from a sturdy, stable tripod head that's incredibly light to carry. Frame images with even greater precision thanks to the geared movement, which will enable you to compose your images one micro-step at a time on all three axes. To adjust the frame, just push the knob against the level to loosen the locking system. The knobs have also been carefully designed to ensure ergonomic comfort, no matter how much you frame and shoot. With the standard 200PL plate included, you needn't worry about switching plates when using different Manfrotto heads. This is always attached to the camera, meaning you can get ready to shoot photos or videos in almost no time. For your assurance, this product has a 10-year warranty and has been designed with premium materials and advanced engineering processes in Italy for guaranteed quality. Geared technology by Manfrotto is also patent pending.

Manfrotto MHPANOVR Virtual Reality Panoramic Head With Multiple Sliding Plates

Manfrotto MHPANOVR (MH-PANOVR, MH/PANOVR, MH_PANOVR, MH PANOVR, mhpanovr) Virtual Reality Panoramic Head With Multiple Sliding Plates The VR Panoramic Head is essential for capturing 360o stills and videos. With its 4-kg payload, it works perfectly with Professional DSLRs. It features sliding plates to position the camera over the panoramic rotation axis, a sliding plate that rotates around the front/back tilt axis. These allow the camera to be rotated on both horizontal and vertical axes around the camera/lens nodal point, making it easy to achieve the most accurate 360o VR shots . Using this panoramic head enables photo stitching software to produce a precisely composed VR environment with minimum post-production or software correction. All its plates and rotation index guides feature clear markings to allow easy repositioning of the camera once nodal point position has been identified and noted down. The vertical bracket can be unlocked and rotated through 90° (then re-locked) so that the head takes up less space during transportation, ensuring that the sliding plate mechanisms are protected against knocks and bumps.

Manfrotto MH804-3W 3 Way Tripod Head Mark II With Retractable Levers

Manfrotto MH804-3W (MH804/3W, MH804_3W, MH8043W, MH804 3W, mh804-3w) 3 Way Tripod Head Mark II With Retractable Levers Everything you need for that perfect shot. The 3 Way Head Mark II in Adapto with retractable levers is both a lightweight and high-end photo tripod head. Independent control on all three axis lets you find the exact framing position you need. The patented spring function provides extra assistance for precise tilt movements. No matter what the shot, you'll be sure to fix on that perfect position. The essential quick release function on this tripod head gives you both safety and security. Even when lifting heavier off-centre loads, you can be rest assured of this kit's reliability at work. Smooth movements are complimented by the ergonomically designed rubber handle. You'll never have to waste time with fiddly controls again. The 3 Way Head Mark II is designed from lightweight technical polymer. This gives you the advantage of both a light weight and a strong frame. When you've completed your photography work, simply retract the tripod head and slot it into the supplied carrying case. Crafted to meet Italy's world leading standards in photography equipment, this kit will stand the test of time.

Manfrotto MH494 494 Centre Ball Head with Universal Round Disc

Manfrotto MH494 (MH-494, MH/494, MH_494, MH 494, mh494) 494 Centre Ball Head with Universal Round Disc For all amateurs and advanced photographers looking for a small yet powerful ball head, the 494 aluminium Center ball head enables fast and precise camera positioning. Lightweight and compact, the 494 Center ball head is ideal for anyone looking for a quick and easy solution that helps frame shots precisely. This tripod head is made of highly-resistant, lightweight aluminium, so it is both extremely portable and strong enough to cope with a payload up to 8 kg. It is the perfect solution for all kinds of mirrorless cameras with zoom lenses and even medium-format DSLRs. This advanced ball head combines practicality with high functionality and features three independent controls: a main knob for managing the sphere lock, an integrated friction control knob that adjusts the ball tension so that equipment weight is always perfectly balanced and shots framed effortlessly; an independent panoramic knob that keeps the horizon flat and moves the camera horizontally, enabling astonishing landscape shots. The 494 Center ball head presents an upper disc which acts as a universal attachment for extreme solidity and grip between the 494 Center ball head and your camera. The upper disc ensures maximum safety that your camera will remain safe in place throughout the whole photographic session. The 494 Center ball head with the universal upper disc performs perfectly for sports photography and studio photography styles. The 494 Center ball head’s design make it both extremely easy to set up and reliable to use in any configuration.

Manfrotto MH01HY-3W Befree 3-Way Live Tripod Head

Manfrotto MH01HY-3W (MH01HY/3W, MH01HY_3W, MH01HY3W, MH01HY 3W, mh01hy-3w) Befree 3-Way Live Tripod Head The Manfrotto’s Befree 3-way Live Head, is an innovative Manfrotto’s travel 3-way fluid head, which features fully foldable handles for unparalleled compactness, and remarkable sturdiness, carrying a payload of up to 6kg. This pioneering head perfectly meets the customer need of experiencing video and photo applications with only one ultra-versatile support. Featuring the high-performance Befree Fluid Drag System, with its smoothest level of control, both on panoramic and tilt movements, this tripod head is exceptionally easy to fine-tune the composition to frame and film as accurately as possible. The high-performance fluid used represents the latest in Manfrotto’s fluid head technology, built to offer the smoothest level of control and movements and exceptional stability even in extreme temperatures (-30°/ +70°). The long panoramic handle, the portrait position and the 3 bubble levels complete the head, guaranteeing full shooting precision and versatility, to promote creative ideas and stunning outdoor shoots. The tripod head also features the unique 200PL-PRO plate, made of a high-quality aluminium body and fully compatible with Manfrotto RC2 & Arca-Swiss type head attachments: with 2 rubber inserts that maximise grip, even on the most angled shots. Moreover, the head's plate-holder is also compatible with 501PL video plate, to ensure the perfect balance even with longer lenses. The ergonomic design makes operating the Manfrotto Befree 3-Way Live Head intuitive and fast, enabling even the most demanding users to set their equipment up quickly and easily, without losing sight of their desired shot.

Manfrotto MB-PL-RL-TL55 ProLight Reloader Tough-55 LowLid Carry-On Camera Roller Bag

Manfrotto MB-PL-RL-TL55 (MB PL-RL-TL55, MB PL RL TL55, MBPLRLTL55, MB_PL-RL-TL55, mb_pl-rl-tl55) ProLight Reloader Tough-55 LowLid Carry-On Camera Roller Bag The new Pro Light Reloader Tough L-55 case for DSLRs and premium CSCs is designed for professional travelling photographers and videographers. This case is Made in Italy with heavy-duty materials, based on lightweight and military standard, with an original Manfrotto style. IP67 testing approved: no ingress of dust and temporary immersion in water for 30 minutes. Manufactured and designed for travellers who do not want to compromise between safety and portability this case is cabin size compliant with most Airplane companies* and it is provided with 2 stage retractable trolley system. The new Pro Light Reloader Tough TL-55 has an internal removable camera organization unit with Manfrotto CPS adjustable dividers. The case can fit your DSLR with a 70/200 mm lens attached, a second camera body and 4-5 additional lenses depending on sizes. *Always check with your airline before flying for their current carry-on requirements. Be aware that overloading the bag will cause it to expand. Features Cabin Luggage This bag fits the standard to fit as carry-on luggage (due to ever changing restrictions, check with your carrier prior to departure) Camera Protection System Manfrotto's CPS – Camera Protection System has been specifically engineered and laboratory tested to garantee the highest level of protection and shock resistance where it really counts. External Tripod Connections This bag comes with the option and proper connections to attach your tripod externally. Flexi Dividers These custom designed dividers have the option to fold out of the way when needed or to be pulled out to protect your equipment in special situations. Interchangeable Dividers Both modular and easy to use, these dividers allow you to custom fit the inside of your bag around your gear by creating the exact size compartment for your gear.. Water Repellant A specially applied coating to the fabric which keeps resistant to moisture

Manfrotto MB-PL-RL-S55 Pro Light Reloader Spin-55 Carry-On Camera Roller Bag

Manfrotto MB-PL-RL-S55 (MB PL-RL-S55, MB PL RL S55, MBPLRLS55, MB_PL-RL-S55, mb_pl-rl-S55) Pro Light Reloader Spin-55 Carry-On Camera Roller Bag The new Pro Light Reloader Spin-55 Camera Roller Bag for DSLRs and premium CSCs is designed for professional travelling photographers. Manufactured and designed specifically for travellers, it fits international carry-on sizes*. This brand-new Pro Light roller bag is the hardside trolley of the collection: externally, it is made of polycarbonate material and internally of EVA molded tray to ensure lightweight and protection. It features 4 spinner double wheels to help carrying heavy gear and a front fast access for 15’’ laptop, accessories or a secondary access for photo gear. This roller bag comes with an internal organized pouch with CPS dividers for maximum flexibility of internal configuration that can be used as photo compartment or removed to use Spin-55 as normal travel luggage. It is equipped also with inner cross ribbons to hold personal items when using it as everyday suitcase. This roller bag can accommodate not only your DSLR attached with a 70/200 mm lens, a second DSLR body and up to 3-4 lenses as well as being able to comfortably fit a Premium CSC as a Sony A9 with additional lenses and a DJI Mavic Pro combo kit. Tailor your bag to suit your own equipment, with 12 protective dividers + 2 CPS internal dividers that can be easily adjusted depending what you’ve got going on that day. In addition it is equipped with 2 internal panel see-through pockets for organize all small camera accessories, cables, memory cards etc. *Always check with your airline before flying for their current carry-on requirements. Be aware that overloading the bag will cause it to expand. Features Cabin Luggage This bag fits the standard to fit as carry-on luggage (due to ever changing restrictions, check with your carrier prior to departure) Camera Protection System Manfrotto's CPS – Camera Protection System has been specifically engineered and laboratory tested to garantee the highest level of protection and shock resistance where it really counts. External Tripod Connections This bag comes with the option and proper connections to attach your tripod externally. Flexi Dividers These custom designed dividers have the option to fold out of the way when needed or to be pulled out to protect your equipment in special situations. Interchangeable Dividers Both modular and easy to use, these dividers allow you to custom fit the inside of your bag around your gear by creating the exact size compartment for your gear.. Laptop Compatible Protect your laptop during transport in the compartment. (See bag for exact sizes) Rain Protector Included fold out protector which when installed creates a barrier between the wet outside and dry inside of your bag. Water Repellant A specially applied coating to the fabric which keeps resistant to moisture

Manfrotto MB-PL-LW-99-2 Pro Light Rolling Organizer LW-99 V2

Manfrotto MB-PL-LW-99-2 (MB PL-LW-99-2, MB PL LW 99 2, MBPLLW992, MB_PL-LW-99-2, mb_pl-lw-99-2) Pro Light Rolling Organizer LW-99 V2 This extra large-sized Pro Light Rolling Organiser LW-99-2 is the ultimate storage solution for your lighting equipment. It features the shock-absorbing Camera Protection System that will deflect all knocks and bumps you may encounter when you are on the move and provides extra protection for your lighting kit. It offers stronger side grip handle, two rear transport wheels and a top grip handle. It also will not weigh you down on your travels because it is made from lightweight materials. In addition, because of the fact you can seal the organiser super-tight, it is easy to protect what is inside from bad weather or dust during storage. This roller bag is the ultimate companion for any photographer or videographer that is looking to travel with their expensive lighting equipment and accessories, and because it is a lightweight alternative to the bulky lighting holders, it is the first choice for professional photographers across the world. The LW-99-2 is stronger and features a reinforced structure than the previous version (MB PL-LW-99-2 replaces MB PL-LW-99). Features Interchangeable Dividers Both modular and easy to use, these dividers allow you to custom fit the inside of your bag around your gear by creating the exact size compartment for your gear.. Water Repellant A specially applied coating to the fabric which keeps resistant to moisture Camera Protection System Manfrotto's CPS – Camera Protection System has been specifically engineered and laboratory tested to garantee the highest level of protection and shock resistance where it really counts.

Manfrotto MB-PL-CC-197 Pro Light Camcorder Case 197

Manfrotto MB-PL-CC-197 (MB PL-CC-197, MB PLCC197, MB PL CC 197, MB_PL-CC-197, mb_pl-cc-197) Pro Light Camcorder Case 197 The compact camcorder case for on-the-go photographers. The Pro Light Camcorder Case 197 for PDW-750,PXW-X500, PMW-350K is the perfect carry solution for busy professionals. The outer shell is made from high-quality, non-rip nylon fabric, which repels water, and absorbs shock. It also has an aluminium frame right near the opening for extra durability. This makes it a reliable, hardwearing and practical case for any pressurised situation. A zippered opening reveals clever Manfrotto Flexi dividers, which not only add to the shock and vibration reduction design, they also bend to fit your equipment. As part of the innovative Camera Protection System (CPS) in the bottom compartment, this keeps everything secure and snug. The lens area is fully supported by a clever lens pillow, and there’s a full-length pocket for all your small items. Carrying this case is a breeze, thanks to 3 handles and a padded, detachable shoulder strap. Plus, it’s versatile enough to suit a range of cameras and equipment, including large camcorders and video DSLRs with medium video rig setup. Clever extra pockets give you the flexibility to organise and carry all your must-have extras too, so you'll never get caught out, whatever the day brings. Features Interchangeable Dividers Both modular and easy to use, these dividers allow you to custom fit the inside of your bag around your gear by creating the exact size compartment for your gear.. Water Repellant A specially applied coating to the fabric which keeps resistant to moisture Camera Protection System Manfrotto's CPS – Camera Protection System has been specifically engineered and laboratory tested to garantee the highest level of protection and shock resistance where it really counts. Trolley Connection For easy wheel along transportation simply slide the designated strap connector over any standard trolley or luggage handle.

Manfrotto MB-MBAG90PN Padded Tripod Bag 90cm

Manfrotto MB-MBAG90PN (MB/MBAG90PN, MB_MBAG90PN, MBMBAG90PN, MB MBAG90PN, mb_mbag90pn) Padded Tripod Bag 90cm ''Durable, comfortably, lightweight and secure. Traveling with your larger tripod can be easier and safe with the Manfrotto MBAG90PN Padded Tripod Bag. Able to accommodate a tripod with a head up to 85 cm long, this bag is designed with Thermoform padding to keep it in place. This not only prevents additional wear and tear, but offers comfortably carrying as well. Made to be durable and weatherproof, the bag was also designed to carry heavy loads more easily and transporting easier. The Thermoform acts as a buffer between your tripod's hard edges and the exterior, with the padding giving extra protection to the more vulnerable areas like the head. A full length zipper helps give a better opening to quickly remove or insert your tripod into the bag. There is also an inner pocket for extra accessories such as video head pan bars, keeping everything in one place. You'll appreciate the tripod bag's asymmetrical design making transport more comfortably, an adjustable shoulder strap, and two carrying handles. This bag was made to last while keeping your gear safe while on-the-go.'' Water Repellant A specially applied coating to the fabric which keeps resistant to moisture

Manfrotto MB-MBAG60N Unpadded Tripod Bag 60cm

Manfrotto MB-MBAG60N (MB/MBAG60N, MB_MBAG60N, MB MBAG60N, MBMBAG60N, MB MBAG 60N, mb_mbag60n) Unpadded Tripod Bag 60cm Intuitive, hardwearing and totally secure. This clever Unpadded Tripod Bag can transport a tripod with a head up to 75cms long. The ideal solution for photographers on-the-go, it allows you to travel light, and securely carry your tripod from one shoot to the next thanks to Thermoform internal padding. Innovative design features include an asymmetrical shape which enables you to carry your tripod with the head attached, so you’ll always be able to shoot in an instant. This durable bag can withstand even the wettest weather conditions, and it easily carries high quality gear safely, so you’ll have the all-important peace of mind when you’re in tough environments. It’s made to handle heavy use, and resist rips and abrasions. A thermoform padded end cup acts as a barrier between the delicate tripod head and exterior surfaces too. This tripod bag can be used to carry a range of tripods, and has a two-way zippered enclosure which runs along the length of the bag, so you can get hold of your kit in a moment, without any fiddling. To make things extra comfortably, the bag also has an adjustable shoulder strap, so you can carry it in the most natural way for you. Water Repellant A specially applied coating to the fabric which keeps resistant to moisture

Manfrotto MB-MBAG120PN Padded Tripod Bag 120cm

Manfrotto MB-MBAG120PN (MB/MBAG120PN, MB_MBAG120PN, MB MBAG120PN, MBMBAG120PN, mb_mbag120pn) Padded Tripod Bag 120cm Durable, comfortably, and secure. Traveling with your larger tripod can be easier and safe with the Manfrotto MBAG120PN Padded Tripod Bag. Able to accommodate a tripod with a head up to 115 cm long, this bag is designed with Thermoform padding to keep it in place. This not only prevents additional wear and tear, but offers comfortably carrying as well. Made to be durable and weatherproof, the bag was also designed to carry heavy loads while making transportation easier. The Thermoform acts as a buffer between your tripod's hard edges and the exterior, with the padding giving extra protection to the more vulnerable areas like the head. A full length zipper helps give a better opening to quickly remove or insert your tripod into the bag. There is also an inner pocket for extra accessories such as video head pan bars, keeping everything in one place. You'll appreciate the tripod bag's asymmetrical design making transport more comfortably, an adjustable shoulder strap, and two carrying handles. This bag was manufactured using high-quality materials and was made to last while keeping your gear safe while on-the-go. Water Repellant A specially applied coating to the fabric which keeps resistant to moisture

Manfrotto MB-MBAG100PNHD HD Padded Tripod Bag 100cm

Manfrotto MB-MBAG100PNHD (MB/MBAG100PNHD, MB_MBAG100PNHD, MB MBAG100PNHD, MBMBAG100PNHD, MB-MBAG-100PNHD, mb_mbag100pnhd) HD Padded Tripod Bag 100cm Long-lasting and ergonomically designed to carry heavy loads. The MBAG100PN HD padded tripod bag is perfect for storing tripods with heads up to 95cm long. With its clever asymmetrical design, adjustable shoulder strap, and two carrying handles, you can carry it with ease. Thanks to its high-quality Thermoform padded interior, this tripod bag is particularly durable and resistant to wear and tear. And because its waterproof, it's an ideal companion when your out shooting in the unpredictable weather. Better still, the Thermoform padding keeps your 475b tripod with the 400 or 405 head stable and secure, protecting it on both ends. Easily extend and fold your tripod in seconds, and keep it safely stored thanks to the bag's zippered closure, which can be fully opened. The padding will also act as a buffer between the tripod's exterior surface and hard edges, keeping the body and head resistant to damage. Plus, the inner pocket makes it easy for you to store and transport important accessories such as video head pan bars so you'll have everything you need for your shoot. With its high-quality materials and durable design, this padded tripod bag is guaranteed to keep your gear safe and secure while being the perfect companion for every on-the-go photographer. Water Repellant A specially applied coating to the fabric which keeps resistant to moisture

Manfrotto MB-MBAG100PN Padded Tripod Bag 100 cm

Manfrotto MB-MBAG100PN (MB/MBAG100PN, MB_MBAG100PN, MB MBAG100PN, MBMBAG100PN, MB-MBAG-100PN, mb_mbag100pn) Padded Tripod Bag 100 cm Durable, comfortably, and secure. Traveling with a larger tripod has never been easier than with the Manfrotto MBAG100PN padded tripod bag. Able to accommodate a tripod with a head up to 95 cm long, this bag is designed with Thermoform padding to keep it in place. This not only prevents additional wear and tear, but offers comfortably carrying as well. Made to be durable and weatherproof, the bag was also designed to carry heavy loads with easier transportation. The Thermoform acts as a buffer between your tripod's hard edges and the exterior, with the padding giving extra protection to the more vulnerable areas like the head. A full length zipper helps give a better opening to quickly remove or insert your tripod into the bag. There is also an inner pocket for extra accessories such as video head pan bars, keeping everything in one place. You'll appreciate the tripod bag's asymmetrical design making transport more comfortably, an adjustable shoulder strap, and two carrying handles. This bag was made to last while keeping your gear safe while on-the-go. Water Repellant A specially applied coating to the fabric which keeps resistant to moisture

Manfrotto 828 Horizontal Bar 3/8''

Manfrotto 828 (MAN-828, MAN/828, MAN_828, MAN828, man_828) Horizontal Bar 3/8'' The Manfrotto Double Camera Bracket allows two camera mounting positions on one camera support head on the Bogen/Manfroto Camera Stands. Attachment points are 3/8".

Manfrotto 826 Camera Support Platform

Manfrotto 826 (MAN-826, MAN/826, MAN_826, MAN826, man_826) Camera Support Platform This optional camera holder allows to put a second camera on the horizontal arm of your Studio Stand.

Manfrotto 824 Revolving Head Adapter

Manfrotto 824 (MAN-824, MAN/824, MAN_824, MAN824, man_824) Revolving Head Adapter Revolving head with 3/8'' threaded fitting.

Manfrotto 820 45 cm Side Column Extension

Manfrotto 820 (MAN-820, MAN/820, MAN_820, MAN820, man_820) 45cm Side Column Extension Manfrotto Horizontal 820 Extension Arm for Salon, Super Salon Stands It fits 0836 Salon and 0866 Super Salon Camera Stands. It extends the horizontal support arm 17.75". Use it for slant-board or "down" shots set up on the studio floor. Matching black finish.

Manfrotto 816-1 Tower Stand 230cm

Manfrotto 816-1 (816/1, 816_1, 816,1, 816+1, 8161) Tower Stand 230cm Our Top-of the-Line stand, the Super Salon 280 brings the ultimate in stability to new heights in your studio. The rugged column in mounted on a heavy-duty cast “T” base easy to move around because of its smooth-rolling wheels. They can be locked into position with just one step on the single control pedal. The Super Salon 280 has a 10cm diameter black anodised aluminium column and a 100cm horizontal camera arm that travels 62cm. Arm has precise rack and pinion drive, and is accurately counter-balanced to move smoothly up and down. The camera support platform allows movement in a solid angle of 360°. Supplied with counter-balanced crossarm, camera support platform and accessory tray.

Manfrotto 800 Mini Static Stand 162cm

Manfrotto 800 (MAN-800, MAN/800, MAN_800, MAN800, man_800) Mini Static Stand 162cm Sturdy, compact, and surprisingly affordable, the versatile Mini Static can handle cameras from 35mm to 4x5'' formats. Ideal for I.D., passport work and portraiture. Pneumatically damped black anodised aluminium column extends from a minimum of 92cm to a height of 162cm. A 3/8'' male thread on column top allows direct mounting of head. Cast iron base has two pivoting wheels for easy movement and individual locks.

Manfrotto 695SP2 Stainless Steel Retractable Spiked Foot Adapter

Manfrotto 695SP2 (695-SP2, 695/SP2, 695_SP2, 695 SP2, 695sp2) Stainless Steel Retractable Spiked Foot Adapter The Manfrotto 695SP2 rubber/metal spiked foot converts the 695 Magfiber monopod foot to a steel tip for firmer footing on soft ground. The spike is made of a special hard anodized aluminum alloy extremely resistant to corrosion. The retractable rubber tip makes this accessory one you can leave on the foot of the monopod at all times.

Manfrotto 695SC2 Suction Cup with Retractable Spike Foot

Manfrotto 695SC2 (695-SC2, 695/SC2, 695_SC2, 695 SC2, 695sc2) Suction Cup with Retractable Spike Foot This Manfrotto 695SC2 Suction Cup is a rubber suction cup foot that also feature a retractable stainless steel spike. The suction cup increases the footprint of the monopod leg by almost 20 times, giving much greater stability when needed. The steel tip provides a firmer footing on soft ground.

Manfrotto 526-1 Professional Fluid Video Head

Manfrotto 526-1 (MAN-526-1, MAN/526/1, MAN_526_1, MAN526-1, man_526-1) Professional Fluid Video Head The 526-1 Professional Fluid Video Head directly addresses the heavy-duty, high-end ENG and EFP video market by offering a feature-packed fluid video head that borrows all the combined benefits of our 500 series heads with the ability to support top weight loads over 35 lbs. The 526-1 features a replaceable and removable pan arm rosette so if any damage occurs to the side castings, only a small part needs to be replaced; large rubber padded knobs for better grip and all the controls (tilt and pan lock, tilt drag) are located on the left side so they can be easily found. The 526-1 offers our most precise fluid drag system comprised of three step settings for low, medium and high drag levels (numbered 1, 2 and 3), plus the additional no-drag setting (number 0) for such occasions as snap-pans/tilts. Counterbalance is achieved through an adjustable spring for camera weights between 17.5 and 33 lbs. The built-in 4-inch half-ball adapts to a number of our tripods with a 4-inch receiver, allowing the quick leveling of the camera with the aid of the bright leveling bubble. The 526-1 comes with one pan arm and the long 357PLV-1 plate.

Manfrotto 526-536K-1 526-1 Head with 536 CF Tripod System & Bag

Manfrotto 526-536K-1 (526/536K/1, 526_536K_1, 526536K-1, 526+536K-1, 526,536K-1, 526-536k-1) 526-1 Head with 536 CF Tripod System & Bag This kit contains the Manfrotto 526 Professional Fluid Video Head and the Manfrotto MPRO 536 Carbon Fiber 3-Stage Video Tripod. See Details Below. Carbon Fibre Tubing Manfrotto's carbon fibre tubing is popular among outdoor photographers because it's light in weight and also more rigid and supports heavier loads than aluminum, giving it a double advantage. Ergonomic Ergonomic and easy to use Ergonomic Leg Angle Selector This tripod features a newly designed ergonomic leg angle selector. This new angle selector improves the comfort and the precision in use. Magnesium Castings Lightweight magnesium is used for die-cast parts. Magnesium has a density of 1.74g/cm3 as opposed to aluminum's 2.70g/cm3 - a 35% reduction. Despite its lower weight, magnesium is more rigid than aluminum, and has the same strength per volume. Retractable Spiked Feet Retractable spiked feet mean you can use this both outdoors (with the spike extended for better grip on soft terrain, moss, plants, etc) and indoors on delicate floor surfaces (with the rubber foot covering the spike to avoid damage and give more stable non-slip support) Weight-Saving Construction Materials, design and construction techniques have been carefully selected to help save weight without sacrificing stability or strength

Manfrotto 438 Ball Camera Leveller

Manfrotto 438 (MAN-438, MAN/438, MAN_438, MAN438, man_438) Ball Camera Leveller The 438 is fitted between tripod and head and provides easy, fast levelling for tripods without built-in levelling mechanisms. Its range of movement is 10°.

Manfrotto 400 Studio Geared Head

Manfrotto 400 (MAN-400, MAN/400, MAN_400, MAN400, man_400) Studio Geared Head Heavy-duty, portable, and dependable, the Studio Geared Head gets the job done with ease. Offering precise geared movements in 3 directions, it’s a professional add-on to you kit that delivers reliably smooth shots. Designed for portability, it can handle heavy equipment without weighing you down. Made from lightweight and sturdy aluminium, this geared tripod head features rotating handles for sturdy pan and tilt movements. It also features a separate handle for side-to-side leveling. When not in use, the handles can conveniently be folded away for added portability. Ideal for traveling photographers, this tripod head weighs a mere 2.6kg, yet can handle an impressive payload of up to 10kg. Rest assured that you gear is safely in place and focus on capturing that perfect shot. it's intuitive design facilitates tricky 360° pans, +90 to -30° front tilts, and +90 to -30° lateral tilts. Thanks to the leveling bubble, you movements will be controlled, and you framing will be precise. This clever addition ensures that you'll save time and energy during you next shoot. Finally, the tension-holding round quick release plate keeps you camera in place, but can easily be released for fine tuning. Mount this geared tripod head to studio columns or larger tripods and protect your gear with great security and control. Included are three 6.35mm camera attachment screws for added versatility. Designing in Italy with the highest standards of quality, this tripod head was built to last and withstand the tests of time.

Manfrotto 393 Long Lens Monopod Bracket

Manfrotto 393 (MAN-393, MAN/393, MAN_393 MAN393, man_393) Long Lens Monopod Bracket Specifically developed for use with very long lenses on Monopods. Key features: Friction base which enables the bracket to pan on Monopod, also can be used on a tripod. Two rubber hand grips plus rubber protection to prevent damage to lens when tilted to maximum. Variable centre height adjustment in three steps.