Portabrace Porta Brace RS-HDC3500 Rain Cover for the Sony HDC-3500 Camera

Porta Brace RS-HDC3500 Rain Cover for the Sony HDC-3500 Camera(RS-HDC3500, RSHDC3500, RS/HDC3500) The Porta Brace Rain Slicker is designed to protect the Sony HDC-3500 camcorder from rain, dirt, and dust while in operation. Zippers, flaps, touch fasteners, and vinyl windows allow you to reach critical controls and view meters. The Rain Slicker is easy to put over the camera, microphone, windscreen, batteries, and pistol grip. A Rain Fly covers the entire top of the camera to seal the handle opening. The slicker is constructed of waterproof Taslan nylon with a soft tricot interior layer that protects the camera. In addition to being waterproof, the Taslan material is breathable and allows heat from the camera to escape while the cover is deployed. The adjustable neoprene lens gasket creates a tight seal around the lens, while an included detachable visor adds extra protection against droplets reaching the glass. The vinyl windows keep dirt and moisture out but allow quick visual checks on important meters, indicator lights, and switches. The main body is made from waterproof Taslan nylon material and is protected by a soft layer of nylon tricot, adding significantly to the durability of the coating. The battery end of the rain slicker has adjustable flaps which can be shortened to fit a slim battery, or lengthened to wrap around larger batteries. Wireless mics can also be accommodated. Sealed hook-and-loop fastener openings afford plenty of access to hand controls and the power supply while keeping your equipment dry.   A Rain Fly covers the entire top of the camera to seal the handle opening.

Portabrace Porta Brace Audio case for Sound Device 888 recorder

Porta Brace Audio case for Sound Device 888 recorder(AO-888) Carefully crafted carrying equipment for professional film & video crews

Portabrace WPC-SET WPC-1ORB & WPC-2ORB Wheeled Production Case Set (Black)

Portabrace WPC-SET (WPC_SET, WPC/SET, WPC SET) (WPC/1ORB) (WPC 2ORB) WPC-1ORB & WPC-2ORB Wheeled Production Case Set (Black)  Portabrace wheeled production cases are rugged rolling transport cases designed to protect and carry a wide range of lighting, grip and production gear, electronics, accessories, batteries, cable, and more. The cases have a lightweight yet rigid and highly-protective frame. The frame has a layer of padding and is covered in water-resistant, military-grade 1000d Cordura® fabric and water-proofed nylon-bonded triple-tacked stitching for long life and superior water-resistance in a range of unpredictable production conditions. Easily cleaned as necessary. The Wheeled Production Case's padded-rigid walls are reinforced with extra layer of lightweight rigid protection for carrying extra heavy loads. The case interior can be organized into a custom divider setup using the included padded rigid dividers. There are oversized exterior pockets for extra storage. Removable Off-Road Wheel System Each "WPC" features our removable wheel system that provides maximum stability and a smooth rolling experience while also allowing you to remove the wheels to prevent axle damage during air or van transport. The smooth rolling high-performance off-road removable wheels are made of solid rubber and have off-road treads for superior rolling on almost any surface. The wheels have smooth-rolling ball bearings and solid-steel axles to allow you to pull heavy loads comfortably and confidently.

Portabrace WPC-3ORB Wheeled Production Case (Large, Black)

Portabrace WPC-3ORB (WPC_3ORB, WPC/3ORB, WPC 3ORB) Wheeled Production Case (Large, Black) The WPC-3ORB (Large Wheeled Production Case) is a rugged rolling transport case designed to protect and carry a wide range of lighting, grip and production gear, electronics, accessories, batteries, cable, and more. The case has a lightweight yet rigid and highly-protective frame. The frame has a layer of padding and is covered in water-resistant, military-grade 1000d Cordura® fabric and water-proofed nylon-bonded triple-tacked stitching for long life and superior water-resistance in a range of unpredictable production conditions. Easily cleaned as necessary. The case's padded-rigid walls are reinforced with extra layer of lightweight rigid protection for carrying extra heavy loads. The case interior can be organized into a custom divider setup using the included padded rigid dividers. There are oversized exterior pockets for extra storage. Removable Off-Road Wheel System The WPC-3ORB features our removable wheel system that provides maximum stability and a smooth rolling experience while also allowing you to remove the wheels to prevent axle damage during air or van transport. The smooth rolling high-performance off-road removable wheels are made of solid rubber and have off-road treads for superior rolling on almost any surface. The wheels have smooth-rolling ball bearings and solid-steel axles to allow you to pull heavy loads comfortably and confidently.

Portabrace WPC-3OR Wheeled Production Case (Large, Blue)

Portabrace WPC-3OR (WPC_3OR, WPC/3OR, WPC 3OR) Wheeled Production Case (Large, Blue) The WPC-3OR (Large Wheeled Production Case) is a rugged rolling transport case designed to protect and carry a wide range of lighting, grip and production gear, electronics, accessories, batteries, cable, and more. The case has a lightweight yet rigid and highly-protective frame. The frame has a layer of padding and is covered in water-resistant, military-grade 1000d Cordura® fabric and water-proofed nylon-bonded triple-tacked stitching for long life and superior water-resistance in a range of unpredictable production conditions. Easily cleaned as necessary. The case's padded-rigid walls are reinforced with extra layer of lightweight rigid protection for carrying extra heavy loads. The case interior can be organized into a custom divider setup using the included padded rigid dividers. There are oversized exterior pockets for extra storage. Removable Off-Road Wheel System The WPC-3OR features our removable wheel system that provides maximum stability and a smooth rolling experience while also allowing you to remove the wheels to prevent axle damage during air or van transport. The smooth rolling high-performance off-road removable wheels are made of solid rubber and have off-road treads for superior rolling on almost any surface. The wheels have smooth-rolling ball bearings and solid-steel axles to allow you to pull heavy loads comfortably and confidently. There is a retractable handle for pulling the case and comfortable suede leather handles for picking the case up during transport.

Portabrace WBU-1ORB Wheeled Bucket Case (Black)

Portabrace WBU-1ORB (WBU_1ORB, WBU/1ORB, WBU 1ORB) Wheeled Bucket Case (Black) The Wheeled Bucket Case is perfect for transporting and shipping the Mac Pro Tower or field video equipmnent.  The padded, rigid, hollow-core frame provides maximum protection in a lightweight format.  The case exterior is made using durable, 1000-denier Cordura® fabric with a waterproof, anti-skid lining on the bottom.   Roll the Wheeled Bucket Case smoothly over almost any surface with its off-road inline skate wheels and strong steel axle.   There's a large front pocket to store cables and an a small vinyl window for displaying a press pass or other identification. Available in Signature Blue or Midnight Black.

Portabrace WCS-3ORB Large Wheeled Case for Carrying C-Stand and Accessories

Portabrace WCS-3ORB (WCS_3ORB, WCS/3ORB, WCS 3ORB) Large Wheeled Case for Carrying C-Stand and Accessories The Porta-Brace WCS-3ORB Wheeled C-Stand Case is designed for transporting multiple sets of c-stands (up to 37" long) or other heavy loads of studio, audio, video and film equipment. The case is constructed of a strong semi-rigid interior frame covered with 1,000 denier abrasion-resistant Cordura nylon fabric. There is thick padding around the case that provides extra protection for case contents. It has off-road inline skate wheels with ball bearings and solid steel axles for smooth rolling over almost any surface. It has 2 overlapping carrying handles. A set of fold down dividers is provided which allows customizing of storage compartments.  The WCS-3ORB now comes with a SAN-2B and a CS-B9 padded pouch. Abrasion-resistant, 1000-denier Cordura nylon Interior dividers included for customizing interior 2 large side accessory pockets for cables Comfortable suede carrying handles Removable off-road inline skate wheels  

Portabrace WPC-1ORAUD Wheeled Production Case (Blue)

Portabrace WPC-1ORAUD (WPC_1ORAUD, WPC/1ORAUD, WPC 1ORAUD) Wheeled Production Case (Blue) The WPC-1ORAUD Wheeled Production Case is made for transporting all kinds of  audio equipment. The cases are designed to be used for handling gear on location as well as transporting apparatus to the job site. They are constructed of a strong ridged interior frame covered with 1000 denier Cordura nylon fabric, with padded protection all around. The WPC-1ORAUD has off-road inline skate wheels with strong steel axles for improved stability and traction. A retractable telescoping steel handle is mounted on top for portability.Case Basics Lightweight production case for heavy loads for studio, audio, video and film equipment Divider kit is provided which allows customizing of an infinite number of storage compartments. Material 1000 denier water-resistant Cordura nylon Strong ridged interior frame Fully padded all around the interior Pockets Two exterior front pockets Two large side pockets Top pocket Rear slip pocket Carrying Options Retractable telescoping steel handle Off road rubber wheels with long axles on the wheels for good tracking  

Portabrace SZW-3B Size Wize Production Travel Case (Black)

Portabrace SZW-3B (SZW_3B, SZW/3B, SZW 3B) Size Wize Production Travel Case (Black) The Size Wize Camera Case was developed with air travel in mind to carry all kinds of equipment and accessories. The overall allowable size for hand luggage is currently 45" (L+W+H) on most airlines, and this bag is exactly that. The case carries the greatest amount of equipment with you within airline maximum size limitations. The unique, rigid-wall construction optimizes interior space and provides maximum protection for your equipment. In addition, your Size Wize Production Case features a snag free travel cover, a heavy duty shoulder strap, and our new movable partition system.

Portabrace SLR-1 DSLR Carrying Case (Blue)

Portabrace SLR-1 (SLR_1, SLR/1, SLR 1) DSLR Carrying Case (Blue) The SLR Camera Cases is a durable case for field photography. There is a padded, rigid-frame interior with adjustable camera tie-down strap that secures your camera in place. A padded divider-kit system organizes and protects camera & accessories. Carry using the suede handles or comfortable shoulder strap.

Portabrace SC-HPX500 Cover for Panasonic AG-HPX500B (Blue)

Portabrace SC-HPX500 (SC_HPX500, SC/HPX500, SC HPX500) Cover for Panasonic AG-HPX500B (Blue) Case Archive items are for custom order only. Please contact us for pricing and order specifications.  

Portabrace RS-XF705 Custom Rain Cover for Canon XF705 Camera

Portabrace RS-XF705 (RS_XF705, RS/XF705, RS XF705) Custom Rain Cover for Canon XF705 Camera The RS-XF705 is custom-fit to each Canon camera model. Clear vinyl windows and zippered openings provide easy camera access for optimum functionality in the field. The slicker is made from 3-ply nylon Taslan with a soft tricot backed lining. The unique Taslan material is both waterproof and breathable, which allows heat to escape without sacrificing protection from rain and dust.   An elastic neoprene gasket grips the camera lens to help secure the case on the camera and to form a water and dust-resistant seal.  There's a black fabric hood that covers fold-out video LCD monitors for improved visibility in the field.

Portabrace RS-URSA Rain Slicker for Blackmagic URSA (Black)

Portabrace RS-URSA (RS_URSA, RS/URSA, RS URSA) Rain Slicker for Blackmagic URSA (Black) The RS-URSA is a custom-fit rain cover for the Blackmagic URSA camera. It's made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera and reduces noise during operation. The Taslan material is both waterproof (1000MM waterproof rating) and breathable (1000G/M² breathability rating), which provides protection from rain and dust while also allowing for heat from the camera to escape. Clear Vinyl windows are used to provide unobstructed visibility of camera controls and the viewfinder. Velcro-sealed openings are carefully placed to provide full access to controls and power supply without allowing water to seep in. The adjustable lens gasket creates a tight seal around a wide range of lens sizes, including cinema lenses and matte boxes.  The waterproof material that forms the cover around the lens also adjusts to accomodate different lens lengths.

Portabrace RS-NX5UB Compact HD Rain Slicker (Black)

Portabrace RS-NX5UB (RS_NX5UB, RS/NX5UB, RS NX5UB) Compact HD Rain Slicker (Black) The Compact HD Rain Slicker RS-NX3/1 is custom fit to the Sony HXR-NX5U camera model. Velcro-sealed flaps, clear vinyl windows and zippered openings provide maximum protection and optimum ease of operation. Special triple-layer, tricot-finished, nylon is used around the body of the camera to repel water at the case surface.  Cameras with fold-out video screens are shrouded with a black fabric hood that makes viewing LCD monitors easier on sunny days.

Portabrace RS-C3500II Rain Slicker for C100/C300/C300 II/C500 Camera

Portabrace RS-C3500II (RS_C3500II, RS/C3500II, RS C3500II) Rain Slicker for C100/C300/C300 II/C500 Camera Protect your Canon C300 Mark II or C500 from rain and dust. The RS-C3500II is made from Nylon Taslan material with a soft tricot interior that won't scratch your equipment. The Taslan material is both waterproof (1000MM waterproof rating) and breathable (1000G/M² breathability rating), which keeps the camera dry while also preventing the camera from overheating. A clear Vinyl window provides an unobstructed view of the controls. The RS-C3500II can be used with view-finder and shoe-mount grip in place.

Portabrace RS-C200 Custom-Fit Rain Cover for Canon C200 Camera

Portabrace RS-C200 (RS_C200, RS/C200, RS C200) Custom-Fit Rain Cover for Canon C200 Camera Protect your Canon C200 from rain and dust. The RS-C200XL is made from Nylon Taslan material with a soft tricot interior that won't scratch your equipment. The Taslan material is both waterproof (1000MM waterproof rating) and breathable (1000G/M² breathability rating), which keeps the camera dry while also preventing the camera from overheating. A clear Vinyl window provides an unobstructed view of the controls. The RS-C200XL can be used with view-finder and shoe-mount grip in place.

Portabrace RIG-6SR Camera Bag (Black)

Portabrace RIG-6SR (RIG_6SR, RIG/6SR, RIG 6SR) Camera Bag (Black) The black RIG-6SR Camera Bag from Porta Brace is a get-up-and-go bag for the videographer who needs a lightweight and very durable case that is basically designed to be "stow and go". Made from tough 1000-denier Cordura nylon and complemented by interior foam padding, this is a rough and ready bag that holds your large HDSLR or cine-style camera, fully assembled, in shooting position. Simply unzip the single middle zipper that runs down the center of the bag, grab your camera and shoot. When finished, replace the rig, zip up the bag and move on.  The bag is part of Porta Brace's RIG series where the basic shell is empty but can be customized with any number of optional accessories purchased from Porta Brace's Online Case Builder. Items such as straps, lens cups, camera stabilizers, padded pouches, camera pillows and iPad pouches can be bought to tailor the case to suit your needs. Switch them in and out to accommodate your daily requirements. A long exterior front zippered pocket holds more accessories such as cables and adapters or other quick access items, The case is carried by two strong suede leather handles or its side pull handle. A handy front D-Ring is included for attaching keys, ID holder or small pouch. Soft, run-style bag with single zipper that runs down the middle to provide quick and easy access to your rig This bag can be customized to suit your shooting and gear needs by purchasing any number of optional accessories from Porta Brace's Online Case Builder; optional RIG-KIT1, standard interior kit is available for this bag Holds rig in shooting position Zipper opens along full length of bag to expose the contents Long front zippered accessory pocket Dual suede leather handles; side pull handle Front D-Ring for keys 1000-denier Cordura nylon; Veltex and foam padding  

Portabrace RB-3B Lightweight Run Bag, Large for A/v Production Accessories (Black)

Portabrace RB-3B (RB_3B, RB/3B, RB 3B) Lightweight Run Bag, Large for A/v Production Accessories (Black) The New RUN BAG has a new zipper facing to keep even more water out should you forget and leave the case out in the rain. The main compartment is foam padded with a padded rigid bottom. Two dividers span the 7" width with a 12" divider in between (with zippered slip pocket), providing a useful array of subdivisions. Fold them out of the way for one large compartment. A shoulder strap is included.

Portabrace RB-2B Lightweight Run Bag, Medium for Audio and Video Production Accessories (Black)

Portabrace RB-2B (RB_2B, RB/2B, RB 2B) Lightweight Run Bag, Medium for Audio and Video Production Accessories (Black) The New RUN BAG has a new zipper facing to keep even more water out should you forget and leave the case out in the rain. The main compartment is foam padded with a padded rigid bottom. Two dividers span the 7" width with a 12" divider in between (with zippered slip pocket), providing a useful array of subdivisions. Fold them out of the way for one large compartment. A shoulder strap is included.

Portabrace QS-2 Quick Slick Camera Case

Portabrace QS-2 (QS/2, QS_2, QS 2) Quick Slick Camera Case The Porta Brace QS-2 Quick Slick Camera Case is a quick to put on, compact rain and dust protection case for basic camcorder configurations. The Lens gasket grips lens shade for a quick easy seal against wind driven elements. Easy access is accomplished with a fold over top cuff that seals around light post and shoulder straps. It opens wide for tape exchanges. The Quick Slick is designed for camcorders with an internal focus lens and stock microphone. The Combination of zipper and stretchy neoprene makes the viewfinder easy to put on then snug up for tight fit. It has a Neoprene microphone opening, viewfinder seal, light post access, waterproof handle access, a vinyl window for visual checks, a tight lens seal and a full skirt for tripod use.

Portabrace POL-XF105 Polar Mitten Camera Case for Canon XF105

Portabrace POL-XF105 (POL_XF105, POL/XF105, POL XF105) Polar Mitten Camera Case for Canon XF105 Polar Mitten Camera Cases are designed to keep your camera functioning properly in cold weather.  They are thickly padded with high-loft insulation material.  Air-activated warmers are placed along the case interior to keep battery, recorder, lens and hands warm in extreme cold temperatures (Tested at “50 degrees Fahrenheit). The insulated lens cap protects the lens in transport and also prevents condensation from forming when bringing the camera in from the cold. Each Polar Mitten Case comes with 4 air-activated heat packs.  Additional packs (PHP-2) can be ordered directly. 

Portabrace POL-PXWZ280 Polar Mitten Camera Case for Sony PXW-Z280

Portabrace POL-PXWZ280 (POL_PXWZ280, POL/PXWZ280, POL PXWZ280) Polar Mitten Camera Case for Sony PXW-Z280 Polar Mitten Camera Cases are designed to keep your camera functioning properly in cold weather.  They are thickly padded with high-loft insulation material.  Air-activated warmers are placed along the case interior to keep battery, recorder, lens and hands warm in extreme cold temperatures (Tested at –50 degrees Fahrenheit). The insulated lens cap protects the lens in transport and also prevents condensation from forming when bringing the camera in from the cold. Each Polar Mitten Case comes with 4 air-activated heat packs.  Additional packs (PHP-2) can be ordered directly. 

Portabrace POL-PXWZ150 Polar Mitten Camera Case for Sony PXWZ150

Portabrace POL-PXWZ150 (POL_PXWZ150, POL/PXWZ150, POL PXWZ150) Polar Mitten Camera Case for Sony PXWZ150 Polar Mitten Camera Cases are designed to keep your camera functioning properly in cold weather.  They are thickly padded with high-loft insulation material.  Air-activated warmers are placed along the case interior to keep battery, recorder, lens and hands warm in extreme cold temperatures (Tested at –50 degrees Fahrenheit). The insulated lens cap protects the lens in transport and also prevents condensation from forming when bringing the camera in from the cold. Each Polar Mitten Case comes with 4 air-activated heat packs.  Additional packs (PHP-2) can be ordered directly. 

Portabrace POL-PX270 Polar Mitten Camera Case for Panasonic AJ-PX270

Portabrace POL-PX270 (POL_PX270, POL/PX270, POL PX270) Polar Mitten Camera Case for Panasonic AJ-PX270 Polar Mitten Camera Cases are designed to keep your camera functioning properly in cold weather.  They are thickly padded with high-loft insulation material.  Air-activated warmers are placed along the case interior to keep battery, recorder, lens and hands warm in extreme cold temperatures (Tested at 50 degrees Fahrenheit). The insulated lens cap protects the lens in transport and also prevents condensation from forming when bringing the camera in from the cold. Each Polar Mitten Case comes with 4 air-activated heat packs.  Additional packs (PHP-2) can be ordered directly. 

Portabrace MOH-702L Protective Visor Hood for SmallHD 702

Portabrace MOH-702L (MOH_702L, MOH/702L, MOH 702L) Protective Visor Hood for SmallHD 702 The MOH-702L Monitor Hood is a lightweight rain cover and field viewing visor for use with the Small HD 702 monitor. The case is constructed using Nylon Taslan® material that is both water-resistant and breathable. This allows the cover to protect the 702 monitor from rain while allowing heat generated from the monitor to escape. The 9-inch long visor dramatically reduces glare and improves screen visibility. The rim of the visor is lined with a padded, soft material to prevent skin irritation when viewing. There is an access flap to the accessory shoe for mounting the monitor and case to the top of your HDSLR.

Portabrace LR-4GLCCB Glidecam Carrying Case (Black)

Portabrace LR-4GLCCB (LR_4GLCCB, LR/4GLCCB, LR_4GLCCB) Glidecam Carrying Case (Black) The Glidecam Carrying Case from Porta Brace is a rigid framed, heavy-duty case that is designed for worry-free transport of your Glidecam stabilizer system. This case has 2 heavily padded dividers as well as a BK-ZC stuff sack. The Veltex­-lined interior keeps your Glidecam safe while running to shoots across town or even when you throw the case in the trunk of your car.

Portabrace LPB-LED4 Carrying Case for 4 Litepanels 1X1 Lights (Midnight Black)

Portabrace LPB-LED4 (LPB_LED4, LPB/LED4, LPB LED4) Carrying Case for 4 Litepanels 1X1 Lights (Midnight Black) The LP-LED4 Carrying Cases is designed to carry 4 (LED4) Lite Panel 1X1's or similar LED lights. Each case is made using 1000-denier Cordura® material that is foam-padded to protect the light panels during transport. There is a thick, foam-padded "U" shape at the base of the case for extra protection against drops. The top-loading zipper design gives you quick access to your light panel during setup. A comfortable suede leather shoulder strap is included for carrying the cases and light over your shoulder.

Portabrace LPB-LED2 Carrying Case for Multiple Lite Panels 1X1 (Midnight Black)

Portabrace LPB-LED2 (LPB_LED2, LPB/LED2, LPB LED2) Carrying Case for Multiple Lite Panels 1X1 (Midnight Black) The LP-LED2 Carrying Case for Multiple Lite Panels 1X1 (Midnight Black) is made of water resistant 1000 denier Cordura nylon with closed-cell foam padded interior and thick U-shaped foam at the bottom. There is a removable interior divider. The top-loading zipper design gives quick access to the panels. The case has an external pocket for cables and batteries, a soft, padded pouch for carrying gels and 2 side exterior light stand pockets. It is carried by 2 handles with suede leather covered overlapping grips or an included shoulder strap with suede leather covered pad. Case Basics Fits Multiple Lite Panels 1X1 squares Removable interior divider Material Water resistant 1000 denier Cordura nylon Closed-cell foam padded interior Thick U-shaped foam at the bottom Pockets External touch fastener pocket for cables and batteries Soft, padded pouch for carrying gels Two exterior side light stand pockets Large rear slip pocket Vinyl ID Window Large interior mesh pocket Carrying options Carry handles with suede leather covered overlapping grips Shoulder strap with suede leather covered pad Compatible with multiple Lite Panels 1X1  

Portabrace LP-1B Light Pack Case (Black)

Portabrace LP-1B (LP_1B, LP/1B, LP 1B) Light Pack Case (Black) The LP-1B Carrying Case is a long and narrow rigid-frame case ideal for transporting and protecting small light heads and stands or long, 800mm lens kits. It is constructed using abrasion-resistant 1000-denier Cordura® nylon treated with an extra layer of waterproof protection.  There is a lightweight, rigid-core frame lined with 1-inch thick soft padding, covered with a soft Veltex® lining.  Padded bendable dividers are included for separating contents inside the case.  The bottom of the case is lined with an anti-skid rubber material, which makes water and dirt easy to wipe off. Included with the LP-1 is a comfortable suede-leather (HB-1040) Shoulder Strap, five (5) Bendable Dividers, one (1) Small Medium Fleece Pillow for cushioning equipment and a 9-inch by 9-inch Padded Stuff Sack(PB-B9) for storing delicate accessories. Suggested uses for the LP-1B Multiple Lowel PRO Power Tungsten LED Lights Lowel Tota or similar tungsten light kits Mole Richardson Nooklite kits 24-inch Kino Flo daylight and tungsten tubes along with a ballast and header cable Small light stands and miscellaneous grip-heads Small tripods and other film and video accessories 800mm Lenses such as Canon, Nikon or Sigma  

Portabrace DCO-3U Rigid-Frame Protection for Carrying HDSLR Camera and Lenses (L)

Portabrace DCO-3U (DCO_3U, DCO/3U, DCO 3U) Rigid-Frame Protection for Carrying HDSLR Camera and Lenses (L) The DCO-3U has a special design that widens towards the front of the case in order to fit a camera assembled with a matte box and follow focus. The DCO-3U Camera Case has a padded, hollow-core rigid frame that provides maximum protection for your equipment while remaining lightweight. The case exterior is constructed using durable Cordura material (1000-denier).  There are soft suede-leather carrying handles and a comfortable heavy-duty suede shoulder strap. The DCO-3U comes with a heavy-duty, suede leather shoulder strap, CS-B9 Pouch, PB-812 Pouch, PB-LCP-4 Lens Cup, 2 Positionable Stuffer Blocks, White Balance Card, and camera tie-down strap.

Portabrace DCO-2U Rigid-Frame Protection for Carrying HDSLR Camera and Lenses (M) (Signature Blue)

Portabrace DCO-2U (DCO_2U, DCO/2U, DCO 2U) Rigid-Frame Protection for Carrying HDSLR Camera and Lenses (M) (Signature Blue) The Digital Camera Organizer has a rigid-frame that provides an extra level of protection. The DC Organizer is the ideal case for field photography and video. The case has 7 pockets; one exterior large mesh pocket, 1 exterior large zipper pocket, 2 side pockets with 2 mesh pockets, interior pocket and the lid contains 2 zippered mesh pockets. This case comes with a Shoulder Strap, PB-B6 Pouch, PB-B9 Pouch, PB-LCP-4 Lens Cup (4-inch), PB-LCP-7 Lens Cup (7-inch), (2) 5x9 Bendable Dividers, Medium Sized Pillow Stuffer, Stuffer Block, Camera Cradle and Cinch Strap.

Portabrace CTC-MINI Traveler Camera Case (Signature Blue)

Portabrace CTC-MINI (CTC_MINI, CTC/MINI, CTC MINI) Traveler Camera Case (Signature Blue) The Traveler is constructed using abrasion-resistant ultra-durable Cordura® Nylon (1000-denier) for long-life reliability in harsh field conditions. Portabrace Cordura material is also woven with an extra layer of water-resistant treatment and is cold-crack tested at -40°F for 4 hours. The case also has one-inch thick foam padding, reinforced by hollow-core plastic on the bottom and sides that combine to provide maximum protection in a lightweight format.   A layer of non-slip, water-proof material has been added to the exterior bottom panel of the case to provide even greater protection against water and dirt when the case is placed on the ground. This waterproof layer can easily be wiped clean.  The Traveler Case is sewn using triple bonded nylon threads and our all thread-ends are flamed to extend the life of the case and strengthen seems. Back-tacking stitch methodology is used to create superior strength along seams and at the connection points of the carry handles and solid-steel strap rings. During transport, the padded side walls fit snugly against the camera. A padded foam support block (CC-STUFFER) is also included, which sticks to the bottom of the case using Velcro® to support the lens and provide an extra level of protection against bumps when you're on the move.  The case is designed with a single, extra durable YKK® zipper that opens the case up wide to make accessing the camera quick. There's a "zipper hood" made using Cordura® material that runs the length of the zipper in order to extend the life of the zipper and prevent water from rain or splashing to get inside the case. A padded genuine-suede shoulder strap is included for superior carry comfort and durability. There is a single 6-inch x 3-inch x 5 inch exterior pocket ideal for carrying additional small accessories. This pocket has a press-pass / ID window for conveniently displaying your credentials. An additional, longer exterior pocket (12-inch x 3-inch x 4-inch) is ideal for a shotgun mic or grip-control and arm.

Portabrace CTC-2 Traveler Camera Case (Signature Blue)

Portabrace CTC-2 (CTC_2, CTC/2, CTC 2) Traveler Camera Case (Signature Blue)  The Porta Brace CTC-2 Traveler Camera Case (Signature Blue) is a 1000 denier Cordura nylon carrying case designed to carry small camcorders such as; Canon XL-1, JVC GY-HD100, Panasonic AG-460 or Sony DSR-200 and accessories. It features padded protection for the camera and extra protection for delicate view finders. The case has 1.0" thick foam reinforced by plastic on the front and back sides. The bottom has a no-sag, hollow core base with foam padding and a foam block to help position the camera. A non-slip bottom layer wipes clean easily and provides extra water proof protection. The CTC-2 has exterior and interior pockets that provide room for batteries, tapes, tripod plate, and accessories. It is carried by a suede leather shoulder strap or a suede carrying handle. A white balance card is included. Construction 1000 denier Cordura nylon Rigid corrugated plastic sides 1.0" padded foam interior Full over the top twin, super-duty YKK zippers with a zipper facing that extends over the zipper to keep rain and debris from entering Pockets Front pockets for extra batteries and tapes, AC power supply or tripod plate. Rear zippered, mesh slip pockets Large interior mesh slip pocket Small interior mesh pocket for battery or cell phone ID window Armored viewfinder space and viewfinder guard for protection White balance card is included Carrying Options Suede leather covered shoulder strap Suede leather covered carrying handle Rings for carrying cable and alternate camera strap Seat belt loop to secure case to car seat belt Heavy-duty swivel clips.  

Portabrace CS-UX90 Custom-Fit Camera Case for Panasonic AG-UX90

Portabrace CS-UX90 (CS_UX90, CS/UX90, CS UX90) (AG_UX90, AG/UX90) Custom-Fit Camera Case for Panasonic AG-UX90 The CS-UX90 camera case is designed to protect and organize the Panasonic AG-UX90 and essential accessories. The case's unique opening has a single, durable YKK® zipper that runs the entire length of the case to provide an extra-wide opening for easily removing and replacing the camera and other case contents.  The case comes with a Camera Cradle designed to secure your camera in place inside the case, even during rough travel conditions. A White Balance Card with convenient wrist strap is also included. The CS-UX90 is made from durable abrasion-resistant 1000-denier Cordura nylon that has been treated with a protective urethane waterproof coating (DWR). The case body is constructed using ¾-inch foam and the bottom panel is reinforced with 8.0mm hollow core plastic and an extra layer of foam. The exterior bottom is lined with a layer of anti-skid Slip-Not material that provides an extra level of protection against water, dirt and grime. The main zipper is protected by a Cordura flap to help prevent damage and keep water from entering the case. ""Concealed Zippers"" are used, which ""reverse"" the zipper facings to prevent snagging and extend life of the zippers. High-quality, bonded thread is used and double-seamed in areas that typically support more weight or are susceptible to additional wear and tear. All thread-ends are burned to prevent loose threads or running on seams. Genuine suede is used to provide extra comfort and durability to the carrying handles and a comfortable nylon shoulder strap is included. The removable strap hassteel clasps that clip to the CS-UX90's strong, nickel-plated steel rings. There is a full-length exterior pocket that measures, which is ideal for cables, a shotgun mic, or an optional rain cover. There's also a long slip-pocket on the back of the case that is ideal for carrying the White Balance Card (included), owner's manuals, airline tickets, and other documents.

Portabrace CLK-OB/SEC Sudio Camera Security Cover & Protection

Portabrace CLK-OB/SEC (CLKOBSEC, CLK OB/SEC, CLK/OB/SEC, CLK OB SEC) Sudio Camera Security Cover & Protection. The CLK-OB/SEC offers complete weather protection for stadium cameras.  The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M² breathability rating), allowing heat from the camera to escape while the cover is deployed.  Long sleeves help keep you dry and three (3) hand-warmer pockets in each sleeve maintain warmth to keep your arms and hands working the camera at cold, outdoor events. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through.

Portabrace CC-3ENGOR Rigid-frame Case, Reinforced Viewfinder Protection & Removable Wheels

Portabrace CC-3ENGOR (CC3ENGOR, CC\3ENGOR, CC 3ENGOR, CC-3-ENGOR) Rigid-frame Case, Reinforced Viewfinder Protection & Removable Wheels The CC-3ENGOR is a rigid-frame ENG-style Shoot Ready camera case that has removable off-road wheels. The lightweight removable wheel system means there's no more need to carry around a trolley. When you want to carry your case, simply pull off the wheels and use the comfortable suede handles or the leather pull handle. Easily replace the wheels when you want to pull the case. The off-road inline skate wheels have solid-rubber tires and ball bearings to smoothly roll over almost any surface. The case has a lightweight, hollow-core rigid frame surrounded by a layer of padding and ballistic-grade 1000-denier Cordura material. There are 2 large exterior pockets ideal for carrying tablet computers, microphones, cables, spare batteries and other accessories. The interior is lined with soft copper-colored Veltex that both protects the equipment and allows you to reposition the interior divider panels anywhere along the inside of the case. 4 padded dividers (1x 24" and 3 6") are included help secure the camera and create compartments for accessories. A camera tie-down strap is also included to further secure the camera during transport.

Portabrace CBA-NX5 Camera BodyArmor For Sony HXR-NX5U Video C

Portabrace CBA-NX5 (CBANX5, CBA\NX5, CBA NX5, CBA-NX-5) Camera BodyArmor For Sony HXR-NX5U Video C The Camera BodyArmor For Sony Video Cameras from Porta Brace provides custom protection for your video camera at all times. The waterproof exterior and view window provide full access to all camera controls so you can continue shooting regardless of weather conditions. For additional protection, the built-in Rain Top protects the camera from rain and snow while the padded lining protects the camera against impact.

Portabrace CBA-HPX300B Full-time Protection from Bumps and Scratches Removable Rain Protection Stores in Case Pocket

Portabrace CBA-HPX300B (CBAHPX300B, CBA\HPX300B, CBA HPX300B, CBA-HPX-300B) Full-time Protection from Bumps and Scratches Removable Rain Protection Stores in Case Pocket Camera BodyArmor for Panasonic broadcast cameras is a custom-fit, padded, protective cover made using a water-resistant, highly abrasive-resistant, soft-feel fabric. Camera BodyArmor protects your camcorder from bumps, hits and scratches. It also reduces the risk of camcorder damage due to precipitation, dust, and other harsh conditions. The back end is expandable to accommodate various sized batteries and wireless microphone combinations. All CBAs for broadcast cameras include a reversible, pull-out Rain Top that's white (reflective) on one side for shooting in the hot sun and black on the other side for cold shoots and rain. The padded interior of the CBA is lined with breathable Leno Mesh to maximize airflow between the cover and camera.

Portabrace CAR-2AUD Lightweight Carrying Case for Pro Audio Equipment

Portabrace CAR-2AUD (CAR2AUD, CAR\2AUD, CAR 2AUD, CAR-2-AUD)  Lightweight Carrying Case for Pro Audio Equipment The Audio Cargo Case has an ultra-light design, featuring dual-rigidity foam for maximum equipment protection. It is designed to fit a recorder, mixer, Portabrae AR or MXC bag, wireless mics, batteries, headphones and a harness. This rugged case is constructed using long-life materials including 1000-denier Cordura® nylon and solid steel clip rings. Reversed zippers and a slip-not anti-skid waterproof bottom panel are used for increased water-resistancy and durability. Arrive at your location knowing everything you need is packed, organized and accessible. There are front and back slip pockets for cast frequency cards, documents, and cables.  The 2 side pockets are perfect for extra batteries, tape, cables, and small tools.  The interior of the case is made using a copper-colored Veltex that contrasts against camera and lenses for clear visibility of the case contents. Completely customize your interior setup using the positionable interior divider system, including 1 horizontal divider,  1 6 x 9 padded pouch, and a set of 3 6-inch Piggin' Strings.  

Portabrace BK-XF300 Soft Backpack Camera Case

Portabrace BK-XF300 (BKXF300, BK\XF300, BK XF300, B-K-XF300) Soft Backpack Camera Case The Portabrace Soft Backpack Camera Case (BKS-2XM) is a "flexible" carrying system that adapts to your changing equipment needs.  From a simple DSLR camera and lens to a full rig with tripod and laptop, the BK-XF300 will keep your gear organized and protected. The case's unique design expands in both length and depth to accomodate a wide range of equipment sizes. Customize the interior divider kit again and again as your equipment needs change. There's a tripod pocket and cinch on one side, a large storage pocket on the other, and a padded laptop pouch that can hold laptops up to 17. Constructed using 1000-denier Cordura fabric, the BK-XF300 is both flexible and durable, ideal for travel and field work. The BK-XF300 meets most airline carry-on requirements. always call ahead and check with the airline regarding their specific carry-on policy for your flight.

Portabrace BK-5DMARKIV Backpack & Slinger-Style Carrying Case for Canon 5D Mark IV and Accessories

Portabrace BK-5DMARKIV (BK5DMARKIV, BK\5DMARKIV, BK 5DMARKIV, B-K-5DMARKIV ) Backpack & Slinger-Style Carrying Case for Canon 5D Mark IV and Accessories The BK-5DMARKIV backpack / sling-pack is specifically sized and customized for the Canon 5D Mark IV and accessories. The case is constructed using water and rip-resistant 1000d Cordura fabric and water-proofed nylon-bonded triple-tacked stitching for superior water-resistance in a range of unpredictable production conditions. The case has padded, adjustable shoulder harnesses and a breathable-mesh contoured back pad for maximum comfort while carrying your 5D kit as a backpack. You can also quickly adjust the straps to use the case as a sling-pack for fast, Shoot-Ready® side-access to your Canon 5D or spare lenses. The main compartment interior lid has organizing pockets for memory cards and an iPad (or similar-sized tablet). The tablet can be used while in the pocket for convenient quick access. The BK-5DMARKIV camera backpack comes with multiple padded-dividers for customizing your case interior to your specific equipment setup. The multi-function side pocket is ideal for organization and transport of a wide range of accessories including tripods and stands, media, chargers, lenses, etc. This case also includes one (1) 7-inch Portabrace Lens Cup and two (2) 4-inch Portabrace Lens Cups for extra protection and enhance field-use of extra lenses.

Portabrace BK-2NR Lightweight, Rigid-Frame Video Camera Backpack

Portabrace BK-2NR (BK2NR, BK\2NR, BK 2NR, B-K-2NR) BK-2NR Lightweight, Rigid-Frame Video Camera Backpack Here at PortaBrace we’ve developed a reputation for tough bags and cases that professionals depend on. With the BK-2NR Lightweight Rigid-Frame Video Camera Backpack we’re continuing that tradition. While lightweight and easy to carry--thanks to non-slip straps, a waist belt and removable straps, and extra closed-cell foam padding--the BK-2NR is also extremely strong thanks to its rigid frame. Made from corrugated plastic, the frame protects a camcorder up to 12” long. Other features of the pack that protect your camcorder include two removable 7 x 13” dividers (one of them corrugated), a camera cradle, a PB-SMP small pillow, and a CC stuffer block. Of course, the 1000-denier Cordura exterior provides the same look and strength of other PortaBrace bags. Additional items included with the pack are the PB-B6 pouch, the PB-B9 pouch, awhite balance card, and the CARA-BRNZ carabiner and flashlight combo. The BK-2NR backpack also features 15 pockets of various shapes and sizes. A padded interior pocket holds a laptop up to 17”, while the side tripod pocket with cinch strap keep your tripod safe and secure. You can also store gear in the two side hook and loop pockets for easy access, or the three side slip pockets, a front hook and loop pocket (with interior slip pocket), or front mesh pockets. The bag also has four clear interior vinyl zipper pockets so you can easily find what you’re looking for.  

Portabrace BK-2N Lightweight, Rigid-Frame Video Camera Backpack

Portabrace BK-2N (BK2N, BK\2N, BK 2N, B-K-2N) Lightweight, Rigid-Frame Video Camera Backpack The BK-2N Backpack Camera Case, Medium (Signature Blue) is a padded 1000 denier Cordura backpack made to carry various camcorders up to 12" long with a laptop computer and tripod. The case has a padded pocket that will hold a 17" laptop computer, side tripod pocket with a cinch strap, camera cradle and additional accessory pockets. It includes a PB-B6 pouch, PB-B9 pouch, PB-SMP small pillow, CC stuffer block and a white balance card. The backpack has extra foam padding and non-slip material on the shoulder, removable waist straps, and padded side support straps. A LI-GLW illumination strip light pocket is included. Construction 1000 denier Cordura nylon Non-absorbent closed-cell foam padding Removable soft divider 7.0 x 11" Removable ridged divider 7.0 x 11" PB-SMP small pillow to protect camcorder CC stuffer block to cushion camcorder Zipper closure Pockets Padded laptop pocket for 17" laptop computer Two side hook and loop pockets Side mesh pocket Three side slip pockets Front mesh pockets Front hook and loop pocket with interior slip pocket Four clear interior vinyl zipper pockets Side tripod pocket with cinch strap

Portabrace RIG-REDEPICTOR Rigid-Frame Case with Off-Road Wheels for Camera Rigs

Portabrace RIG-REDEPICTOR (RIGREDEPICTOR, RIG REDEPICTOR, RIG/REDEPICTOR) Rigid-Frame Case with Off-Road Wheels for Camera Rigs The RIG-2SRKOR Camera Case with interior kit is designed to carry camera rigs fully assembled or with minimal disassembly of the rig components.  The RIG-2SRKOR has smooth-rolling, off-road wheels with ball-bearings and solid steel axels for added strength.  The wheels are also removable to prevent damage during air-travel.  Ideal for mid-size rigs like the Zacuto Fee-NG or Redrock Micro ultraCage, this large and extremely flexible case is durable and complete with accessory items that will assure your gear is held safely and comfortably in place. Arrive at your venue in Shoot Ready™ format knowing everything you need is packed, organized and accessible. The case is made from rugged 1000-denier Cordura® and features 1" thick padding surrounding a hollow-core plastic frame. The bottom is bolstered by a layer of waterproof rubber to assist with ground protection. It's carried by its two top suede leather carry handles or removable suede leather shoulder strap. The main compartment is accessed via strong YKK® zippers and a secure Velcro strip along the front flap. The compartment is empty and can be configured to meet your needs using Porta Brace's included 7" x 13" divider, Camera Tie-down Cinch and Camera Support Block (foam block). The case also comes with two padded lens cups and a handy white balance card. Two large accessory side pockets are accompanied by a front slip pocket for various accessories. RIG Camera Case Features:  Heavy Duty "Shoot Ready" TM transport for complete RIG style cinema and DSLR cameras Save time, avoid camera set-up and break down Light-weight, padded rigid-frame for maximum protection and stackability Padded genuine-suede shoulder strap included for superior carry comfort and durability Organizing accessories included- lens cups, pouches, dividers, equipment tie-downs, padded stabilizing block, white balance card 1000d Cordura brand nylon and triple bonded nylon threads for rugged long-life construction and performance in harsh field conditions Proprietary Portabrace heavy-duty, smooth rolling off-road (OR) removable wheels, high-performance bearings, and solid steel axles for a wide range of extreme field and urban production conditions  Side storage pocket 

Portabrace PB-26LENS Padded Cordura Lens Case (Black)

Portabrace PB-26LENS (PB26LENS, PB/26LENS, PB 26LENS) Padded Cordura Lens Case (Black) The Porta Brace PB-26LENS Padded Cordura Lens Case comes with a padded divider system designed specifically for protecting and transporting camera lenses. The case has a lightweight, rigid frame that is surrounded with thick padding. The case exterior is made of durable, water-resistant 1000-denier Cordura, and the interior has a soft Veltex lining that cushions lenses and also attaches to the hook & loop fastener-based dividers at any point of contact. This allows you to fully customize your interior according to your current equipment needs. The Divider Kit comes with eight DK-C4 4.0” padded dividers and one 15.0” padded divider. The dividers are copper-colored for improved visibility of lenses inside the case.

Portabrace CTC-URSAMINI Traveler Carrying Case for URSA Mini

Portabrace CTC-URSAMINI (CTC_URSAMINI, CTC/URSAMINI, CTC URSAMINI) Traveler Carrying Case for URSA Mini Looking for a lightweight, highly-protective compact case for the Blackmagic Design URSA Mini? Then the CTC-URSAMINI Traveler-Style Camera Case is the perfect case for you! The CTC-URSAMINI fits the Blackmagic URSA Mini camera, with or without shoulder pad, lens and viewfinder. The case has a specially designed padded EVF compartment for protecting the delicate viewfinder, which allows you to spend less time and energy breaking down your URSA Mini compact camera rig. The Traveler is constructed using abrasion-resistant ultra-durable Cordura® Nylon (1000-denier) for long-life reliability in harsh field conditions. Portabrace Cordura material is also woven with an extra layer of water-resistant treatment and is cold-crack tested at -40°F for 4 hours. The case also has one-inch thick foam padding, reinforced by hollow-core plastic on the bottom and sides that combine to provide maximum protection in a lightweight format.   A layer of non-slip, water-proof material has been added to the exterior bottom panel of the case to provide even greater protection against water and dirt when the case is placed on the ground. This waterproof layer can easily be wiped clean.  The Traveler Case is sewn using triple bonded nylon threads and our all thread-ends are flamed to extend the life of the case and strengthen seems. Back-tacking stitch methodology is used to create superior strength along seams and at the connection points of the carry handles and solid-steel strap rings. During transport, the padded side walls fit snugly against the camera. A camera cinch is included, which straps around the camera and pulls tight for added stability. A padded foam support block (CC-STUFFER) is also included, which sticks to the bottom of the case using Velcro® to support the lens and provide an extra level of protection against bumps when you're on the move. There's a removable padded Lens Cup perfect for protecting a spare lens. The Lens Cup has Velcro® to stick to the interior of the case, or it can be pulled out and worn on your belt using the belt-strap feature. A soft, padded CS-B9 accessory pouch is perfect for providing extra protection and organization to small accessories inside the case. The case is designed with a single, extra durable YKK® zipper that opens the case up wide to make accessing the camera quick. There's a "zipper hood" made using Cordura® material that runs the length of the zipper in order to extend the life of the zipper and prevent water from rain or splashing to get inside the case. A padded genuine-suede shoulder strap is included for superior carry comfort and durability. There is a single 6-inch x 3-inch x 5 inch exterior pocket ideal for carrying additional small accessories. This pocket has a press-pass / ID window for conveniently displaying your credentials. An additional, longer exterior pocket (12-inch x 3-inch x 4-inch) is ideal for a shotgun mic or grip-control and arm.

Portabrace CINEMA-SMUGGLERP Soft Case for Cinema Cameras (Platinum)

Portabrace CINEMA-SMUGGLERP (CINEMASMUGGLERP, CINEMA SMUGGLERP, CINEMA/SMUGGLERP) Soft Case for Cinema Cameras (Platinum) The CINEMA-SMUGGLERP is a durable, versatile soft-sided camera case for carrying compact cinema camera setups. The case is constructed using ballistic-grade, 1000-denier Cordura nylon with interior frame. The case fits a wide range of cinema camera and modular-rig configurations.  An extra layer of waterproof Slip-Not material lines the bottom of the case for maximum protection against water when placing the case on the ground.  The CINEMA-COMPACT camera case can be carried using the soft suede-leather handles or comfortable nylon SuperStrap strap with anti-skid bottom layer. There is a large zippered pocket on the back of the case, which is ideal for storing cables, filters, and small accessories.  A large  front pocket is designed to carry shotgun mics, spare batteries, and other small accessories.

Portabrace CINEMA-BACKPACKP Backpack for Cinema Camera Rig (Platinum)

Portabrace CINEMA-BACKPACKP (CINEMABACKPACKP, CINEMA/BACKPACKP , CINEMA BACKPACKP) Backpack for Cinema Camera Rig (Platinum) The CINEMA-BACKPACKP is a durable, versatile soft-sided camera case backpack for carrying cinema camera setups. The case is constructed using ballistic-grade, 1000-denier Cordura nylon with an ultra-lightweight 1-inch thick interior foam frame.  The case fits a wide range of cinema camera and modular-rig configurations. Tapered design contact us for best camera fit.

Portabrace BK-1HDV Backpack for Small Compact HD Camcorder (Black)

Portabrace BK-1HDV (BK_1HDV, BK/1HDV, BK 1HDV) Backpack for Small Compact HD Camcorder (Black)  The BK-1HDV Backpack is designed to hold a small compact HD camera and accessories. The case is made using abrasion-resistant 1000-denier Cordura nylon material. The frame is made using a lightweight, 1-inch thick foam for extra protection for the camera and other contents. The interior is lined with soft Veltex material that prevents scratching of equipment and also allows the interior padded dividers to be placed in any position throughout the interior. The Veltex acts as a connector for the Velcro tips of the padded dividers. The BK-1HDV strap system allows you to use the comfortable backpack straps. The straps have thick padding and are lined with soft mesh material to maximize air-flow between the backpack and your body. The backpack straps tuck away when not in use.  There is a side pouch that carries small tripods and exterior pockets to hold additional accessories. There is also an interior pouch for a tablet computer (iPad compatible) with a clear vinyl cover so the tablet can be used while in the case. Thick padding and soft interior lining Tripod carrying pouch and cinch system Tablet pouch that allows the tablet to be used while stored Comfortable straps and suede leather handle for carrying

Portabrace CTC-1B Traveler Camera Case (Black)

Portabrace CTC-1B (CTC 1B, CTC_1B, CTC1B,CTC/1B) Traveler Camera Case (Black) The CTC-1B case has a specially designed padded EVF compartment for protecting the delicate viewfinder, which allows you to spend less time and energy breaking down your camera rig. The Traveler is constructed using abrasion-resistant ultra-durable Cordura® Nylon (1000-denier) for long-life reliability in harsh field conditions. Portabrace Cordura material is also woven with an extra layer of water-resistant treatment and is cold-crack tested at -40°F for 4 hours. The case also has one-inch thick foam padding, reinforced by hollow-core plastic on the bottom and sides that combine to provide maximum protection in a lightweight format.   A layer of non-slip, water-proof material has been added to the exterior bottom panel of the case to provide even greater protection against water and dirt when the case is placed on the ground. This waterproof layer can easily be wiped clean.  The Traveler Case is sewn using triple bonded nylon threads and our all thread-ends are flamed to extend the life of the case and strengthen seems. Back-tacking stitch methodology is used to create superior strength along seams and at the connection points of the carry handles and solid-steel strap rings. During transport, the padded side walls fit snugly against the camera. A padded foam support block (CC-STUFFER) is also included, which sticks to the bottom of the case using Velcro® to support the lens and provide an extra level of protection against bumps when you're on the move.  The case is designed with a single, extra durable YKK® zipper that opens the case up wide to make accessing the camera quick. There's a "zipper hood" made using Cordura® material that runs the length of the zipper in order to extend the life of the zipper and prevent water from rain or splashing to get inside the case. A padded genuine-suede shoulder strap is included for superior carry comfort and durability. There is a single 6-inch x 3-inch x 5 inch exterior pocket ideal for carrying additional small accessories. This pocket has a press-pass / ID window for conveniently displaying your credentials. An additional, longer exterior pocket (12-inch x 3-inch x 4-inch) is ideal for a shotgun mic or grip-control and arm.    

Portabrace CTC-4 Traveler Camera Case (Blue)

Portabrace CTC-4 (CTC4, CTC 4, CTC/4) Traveler Camera Case (Blue) The Traveler Camera Case series is specifically designed for cameras with ENG-style viewfinders.  The Traveler has thick foam padding, reinforced by hollow-core plastic on the bottom and sides.  A layer of non-slip, water-proof material has been added to the interior and exterior bottom panels of the case.  The interior, along with the foam support block, stabilize the camera inside the case.  The exterior wipes clean easily and provides extra water-proof protection. The armored plastic view finder protector provides extra support for fragile ENG-style viewfinders.  The zipper-facing extends over the zipper to keep rain and debris from getting inside the case during transport.  Six total pockets help you organize and protect batteries, tape stock, cables, filters, and your Portabrace Rain-Slicker.  Traveler cases fit many popular camera models such as: Sony PMW-EX1, PMW-EX3, HVR-Z7, Panasonic AG-HMC70, JVC HD-100U, and many more.

Portabrace DVO-2U DV Organizer Camera Case (Blue)

Portabrace DVO-2U (DVO2U, DVO 2U, DVO/2U, dvo-2u) DV Organizer Camera Case (Blue)  The DVO-2 DV Organizer Camera Case is designed to hold compact Mini DV camcorders and accessories. It is made from 1000 denier Cordura fabric with a new, slip-resistant, easy-clean rubber bottom.  The DVO-2 comes with padded interior dividers, a padded accessory pouch, white balance card, camera tie-down strap, camera stabilizer cradle, camera pillow, and comfortable suede shoulder strap.  The camera is held in place with a universal cradle and a camera tie-down strap.   The lightweight, rigid-frame design provides maximum protection for your camera and accessories, and comfortable carrying for you.