Camrade CAM-SC-CVR-L securityCover Large

Camrade CAM-SC-CVR-L (CAM/SC-CVR-L, CAM/SC/CVR/L, CAMSCCVRL, CAM SC CVR L) securityCover Large At the conclusion of a shooting day, camera operators typically need to de-rig their equipment. This process entails disconnecting various accessories like lenses and viewfinders. But what if you could avoid this hassle altogether? Our security cover provides a seamless solution, allowing you to safeguard your entire camera setup right on location. With this cover, you can protect your camera in a matter of seconds, eliminating the need for disassembly and storage. This safes valuable time and money. Thanks to its integrated steel wire mesh, the securityCover offers not only protection against inclement weather but also theft protection.

CamRade travelMate 360

CamRade travelMate 360 (CAM_TM_360, CAM/TM/360, CAM TM 360) T The travelMate 360 is created to carry on board most airplanes and fits the overhead compartment. If room is limited, the rotating wheels with a 360° radius can be detached to minimise the outer measurements of the bag. Strong but lightweight padding allows this bag to carry cameras with a maximum length of 45 cm/ 17.7 inches. On the front, a separate compartment is added to store your laptop or tablet. Various pockets and slits on both the inside and outside of the bag help you store and organise several smaller items like documents, memory cards, cables and tools. The soft-padded interior includes removable dividers with extra wide hook and loop fasteners for better adhesion to the fabric. This makes it easy to arrange the main compartment into sections to fit to your personal requirements. Some of the smart gimmicks added to these bags are the straps on the side of the main compartment flap to prevent it from falling open, and a complimentary LED light with motion sensor that lights up as soon as you open up the bag!

Portabrace RIG-3SRKOR Large RIG Camera Case and Interior Kit with Off-Road Wheels

Portabrace RIG-3SRKOR (RIG_3SRKOR, RIG/3SRKOR, RIG 3SRKOR) Large RIG Camera Case and Interior Kit with Off-Road Wheels The RIG-3SRKOR is a large, rigid-frame protective carrying case with removable off-road wheels. The case's Shoot-Readysymbol ® design allows for the camera rig to be transported with minimal or no breakdown of the rig components. This case works great with many different camera rig setups including Canon C-Series, Arri Alexa, Blackmagic Design cameras, and Sony cameras. The case walls are constructed of lightweight, rigid, hollow-core plastic that maximizes protection without being too heavy. The main compartment is accessed via strong YKKsymbol ® zippers and a secure Velcro-fastened front flap. The main compartment is padded and can be configured to meet your needs using the included 7-inch x 13-inch padded divider, camera tie-down cinch, and camera support foam block. The case also comes with two padded lens cups, a comfortable heavy-duty sued shoulder strap, and a handy white balance card. There are two large exterior accessory pockets and a front slip pocket for various quick-need items. The RIG-3SRKOR comes with a retractable handle and off-road wheels that are removable to prevent axle damage during air travel. The off-road wheel system has solid rubber tires with off-road treads, ball-bearings for extra-smooth rolling over almost any surface, and solid-steel axles for reliable strength and performance. This large and flexible case is durable and complete with accessory items that will assure your gear is held safely and comfortably in place. The case is made from rugged 1000 denier Cordura and features 1" thick padding surrounding a hollow-core plastic frame. The bottom is bolstered by a layer of waterproof rubber to assist with ground protection. It's carried by wheeling or using its two top suede leather carry handles or an optional HB-1040 suede leather shoulder strap.

Portabrace POL-FS5 Polar Bear Camera Cover for Sony PXW-FS5 Camera

Portabrace POL-FS5 (POL_FS5, POL/FS5, POL FS5) Polar Bear Camera Cover for Sony PXW-FS5 Camera The POL-FS5 Polar Bear Camera Cover is designed to keep the Sony PXW-FS5 warm in cold temperatures. It has a black nylon fabric exterior and is thickly padded and constructed of high-loft insulation.  The interior is lined with a temperature-stabilizing, phase-change material (PCM) that helps keep warm air in the camera chamber. Air activated warmers can be placed inside the case to maintain interior temperatures in extreme cold temperatures (Portabrace Polar Covers have been tested at minus 50 degrees Fahrenheit). The POL-FS5 can be used with a matte box or standard lens.  The attached insulated lens cover protects the lens in transport and prevents condensation from forming when bringing the camera and Polar Bear case in from the cold.  Touch Fastener strips line the interior of the Polar Bear for arranging optional air activated hand-warmers (Portabrace Polar Heat Packs).  Two-hand openings at the lens and one by the viewfinder are enclosed with cotton cuffs that keep hands warm.  The POL-FS5 has three sets of zippers that make it simple to put the cover on and take it off.  The snug bottom zipper around the tripod plate, keeping out the cold when using the camera on a tripod. 

Portabrace PKB-27DSLR Suitcase Style Soft Case with Divider Kit

Portabrace PKB-27DSLR (PKB_27DSLR, PKB/27DSLR, PKB 27DSLR) Suitcase Style Soft Case with Divider Kit Portabrace Packer Cases are perfect for carrying HDSLR cameras, lenses, small matte-boxes and all other accessories. The suitcase-style lid gives you quick, full access to your equipment. Each Packer case comes with a comfortable suede shoulder strap, an interior divider kit, padded accessory pouches, camera-stabilizing straps, and a white balance card.  Packers are available in 4 different sizes based on Portabrace Hard Case shell sizes (PB-2600 - PB-2750).

Portabrace LR-3BOR Light Run Bag with Off-Road Wheels for Lights & Accessories (Black)

Portabrace LR-3BOR (LR_3BOR, LR/3BOR, LR 3BOR) Light Run Bag with Off-Road Wheels for Lights & Accessories (Black) The Light Run Bag is a durable, lightweight 1000-denier Cordura® case designed to carry lighting heads and compact light stands or other lighting or camera accessories.  The LR-3BOR has smooth-rolling, off-road wheels with ball-bearings and solid steel axels for added strength.  The wheels are also removable to help prevent damage during air-travel.  The interior main compartment and the large front pocket are padded for extra protection. There are exterior pockets that will hold AC cords, cables, gel rolls and reflectors. A padded interior divider kit is included that can be positioned to create three separate compartments or a single large compartment. There are suede leather handles for carrying and a comfortable suede leather shoulder strap is included for carrying over the shoulder.

CamRade run&gun Backpack Large

CamRade run&gun Backpack Large ( CAM/R&GBACKP/LARGE, CAM R&GBACKP LARGE, CAM-R&GBACKP/LARGE, cam-r&gbackp-large )  The run&gunBackpack Large offers room for professional cameras up to 52 cm and 20.5 inches (in length) and allows you to safely transport your camera, ready for action! This bag has YKK® zippers with a zipper lock hole, that open the front flap. It has various pockets and slits to store and organize several smaller items like documents, memory cards, cables and tools. The soft-padded interior includes removable dividers which make it easy to arrange the main compartment into sections to fit your requirements. On both sides of the bag you’ll find pockets for all your necessary gear. In the back of the bag a special compartment is added for laptop or tablet storage. When you use this spacious and comfortably balanced run&gunBackpack with soft padded straps, your freedom of movement stays intact while having all your gear right there at the tip of your fingers.

CamRade run&gun Bag XL

CamRade run&gunBag XL ( CAM/R&GB/XL, CAM R&GB XL, CAMR&GBXL, cam-r&gb-xl )  The run&gunBag XL is especially designed for professional cameras up to 65 cm and 25.6 inches (in length) and offers the possibility to safely transport your camera, completely assembled, ready for action! This bag has double (blue) YKK® zippers that open the top flap in one easy pull. Stow away your camera, accessories, tape, batteries, chargers, cables and tools in this easy to use run&gunBag from camRade. The soft-padded interior includes removable dividers which make it easy to arrange the main compartment into sections to fit your requirements. Carry the bag with the included comfortable padded shoulder strap, the soft handle, or transport it safely on a trolley. (The zippered opening on the back of the bag allows you to attach it securely to a trolley). On the front of the bag you’ll find a large pocket for your cables and accessories. Inside, two mesh pockets (made of waterproof material) make it easy to store smaller items and documents. A cinch strap in the main compartment keeps your camera secured during transportation. The bottom of the bag is equipped with a protective armored plate, covered by a waterproof non-slip cover. Together with the reinforced inserts this provides a rigid lightweight frame which safeguards your camera equipment in any situation.

CamRade run&gun Bag Medium

Camrade CAM-R&GB-MEDIUM (CAM/R&GB/MEDIUM, CAM-RGM, CAM RGM, CAM R&GB MEDIUM, CAM R&GBMEDIUM, cam-r&gb-medium ) run&gunBag Medium The run&gunBag Medium is especially designed for professional cameras up to 50 cm and 19.7 inches (in length) and offers the possibility to safely transport your camera, completely assembled, ready for action! This bag has double (blue) YKK® zippers that open the top flap in one easy pull. Stow away your camera, accessories, batteries, chargers, cables and tools in this easy to use, run&gunBag from camRade. The soft-padded interior includes removable dividers which make it easy to arrange the main compartment into sections to fit your requirements. Carry the bag with the included comfortable padded shoulder strap, the soft handles, or transport it safely on a trolley. (The zippered opening on the back of the bag allows you to attach it securely to a trolley). On the front of the bag you’ll find a large pocket for your cables and accessories. Inside, two mesh pockets (made of waterproof material) make it easy to store smaller items and documents. A cinch strap in the main compartment keeps your camera secured during transportation. The bottom of the bag is equipped with a protective armored plate, covered by a waterproof non-slip cover. Together with the reinforced inserts this provides a rigid lightweight frame which safeguards your camera equipment in any situation.

CamRade transPorter Medium

CamRade transPorter Medium( CAM/TRANSPORTER/MEDIUM, CAM TRANSPORTER MEDIUM, CAM-TRANSPORTER/MEDIUM, cam-transporter-medium )  The transPorter Medium is a flexible yet sturdy bag that fits a professional camcorder up to 45 cm/ 17.7 inches. Pockets of many shapes and sizes are added in the front and back pouch for easy access. In the main compartment a mesh pocket with zipper is located, together with a strap to secure your camera and 2 removable dividers. This allows you to organize your gear completely to your liking. The bag is supplied with three accessory protection items; a pouch to store an extra lens, a cover for the lens and hood on the camera and a pouch to store small items such as cables. The items can be secured inside the bag but can also be used separately, which allows you more flexibility. The bag is made of water-resistant 1000 denier grey Cordura® fabric. Due to its triangular shape it is easy to fold the bag together for storage, so it takes up a minimum of space when not in active use.

CamRade camBag 750 - Black

CamRade camBag 750 - Black ( CAM/CB/750/BL, CAM CB 750 BL, CAM CB 750 BL, cam-cb-750-bl )  The camBag 750 – Black is a compact, soft padded and lightweight camera bag that fits a professional ENG/documentary style camera up to 75 cm/ 29.5 inch, including accessories. The camBag is made of water resistant 1000 denier Cordura® nylon with reinforced sides. This creates a solid frame that protects your gear in the most extreme conditions. To accommodate all necessary accessories, this bag has various pockets and compartments on both the inside and the outside. Suede padded hand grips and a removable shoulder strap allow you to carry the bag comfortably in any situation. A flap with zipper on the back of the bag allows you to attach it securely to a trolley. The camBag 750 has a reinforced viewfinder section that protects it from damage and a double zippered lid which closes in the middle of the bag for quick and easy access. Due to the design of this bag it’s possible to keep most matteboxes on the camera during storage or transportation

Peli™ 1740 Long Case integral wheels 1059 x 345 x 302

Peli 1740 Long Case integral wheels (1059 x 345 x 302)  The Peli 1740 is unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Peli case that offers total protection for your equipment. The Peli 1740  is made of Ultra High Impact structural copolymer that makes it strong and durable. The Peli 1740 has wide-track, polyurethane wheels (for stable mobility) to ensure extended towing durability. Designed to either be moved manually or stacked on pallets, the Peli 1740 also has four extra-deep base-to-lid locking cleats that ensure maximum stacking stability. The Peli 1740 has 2 Automatic Pressure Equalization Valves,Comfortable wide handles,Heavy duty wheels with stainless steel bearings and is Inter-StackableWith the Peli 1740 your  equipment can fit into the high density foam if required for total subjection and protection against impact, vibration or shock. A padlock facility (also an integral part of the moulding) keeps your property safe from roving hands. The peli 1740 has outer padlock holes that have reinforced metal padlock protectors to ensure the case cannot be easily cut or pried open.     Weight With Foam 12.25kg     Weight Without Foam 9.98kg     Buoyancy maximum 121.11kg     2 Automatic Pressure Equalization Valves     Heavy duty wheels with stainless steel bearings     Comfortable wide handles     Inter-Stackable     6-peice foam set (optional)     Waterproof     Crushproof     Chemical resistant     Optional Foam set     Stainless steel hardware     Unconditional Lifetime Guarantee of Excellence     Available in black     Stackable    

Peli™ 1560 Case Inc wheels & extendable handle 516 x 390 x 228

Peli 1560 Case Inc. wheels & extendable handle (516 x 390 x 228)  The new Peli 1560 has durable, ball-bearing, polyurethane wheels and an extension handle for easy transportation. It has all the great features of Peli  Protector Cases, This Peli 1560 comes with a choice of foam or padded dividers for total protection of the gear inside.The Peli 1560 also comes with rubberised front and side grips for added comfort when carrying. An o-ring seal and an automatic pressure equalization valve ensure the case is completely watertight. The double step latches make opening easy, while still providing strong enough force to keep the case securely closed when dropped or knocked. The Peli 1560 also features outside padlock receptacles, which have new metal reinforced padlock protectors to ensure that the case cannot be easily cut or prized open.As with all Peli Protector cases, the Peli  1560 offers strength and performance against extreme conditions, rough handling, dust and water, and carries the legendary you break it we replace it lifetime guarantee.     Made of Ultra-High Impact Copolymer     Watertight, Airtight, Dustproof     15-piece Divider Set     Built-in Pressure Equalization Valve     Two Double Throw Latches     Padlock Protectors     Rubber Over-molded Handles     Retractable Pull Handle     Built-in Wheels     Waterproof     Crushproof     Chemical resistant     Optional Foam set or padded divider set     Stainless steel hardware     Unconditional Lifetime Guarantee of Excellence     Available in 4 different colours     Extendable handle and exterior mounted urethane wheels Note: Lid organizer is not included.