DPA 4071-FM (DPA4071FM DPA-4071-FM DPA/4071/FM) Miniature Omnidirectional Microphone, Presence Boost, Beige including Lavalier Clip
The New d:screetâ„¢ 4071 Miniature Microphones are the versatile workhorses that adapts to your needs. With eminent sound quality, a large range of accessories, and adapters available for all pro wireless systems, the d:screet Miniature Mics are the obvious choice for any application requiring a big sound and a small footprint.
An outstanding speech and vocal mic, the d:screetâ„¢ 4071 will make your voice heard and intelligible. Use it for all ENG/EFP and even applications which require small microphones that are resistant to moisture, extreme temperature change and humidity.
When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut has been incorporated in the d:screet 4071 capsule so the built-in pre amp (and the wireless system) will have much larger headroom. Furthermore, it removes distant rumbling from cars, trains, airplanes, etc.
Another and equally important consideration is that when placing a microphone on the body, espcially on the chest, the frequency range of the consonants is damped, resulting in poor intelligibility. The d:screet 4071 has a built-in boost to compensate for this loss. Especially for ENG work the d:screet 4071 is perfect because almost no ENG mixer leaves any possibility for a compensation of this kind.
The New d:screetâ„¢ 4071 Miniature Omnidirectional Microphones are available for purchase from May 2014 and is available in four colors: black, brown, beige and white.
With very low noise and an extremely high sensitivity, the d:screetâ„¢ Miniature Mics offer the most clear, transparent, and natural sound available on the miniature mic market. The mics are capable of handling up to 144 dB peak before clipping, and with a linear response and low distortion and an extremely large dynamic range, they sound great no matter the application.
The d:screetâ„¢ 4071 Miniature Mics are designed to withstand the toughest of conditions. Our unique Double Vent Protection System allows for a great resistance to humidity and sweat. Our d:screet Miniature Omnidirectional Mics design features a reinforced cable relief which is built to withstand the constant twists, bends, and pulls that are part of the everyday use. With a gold treated diaphragm and microphone housing plus a kevlar reinforced cable, the d:screets are made to endure.
The d:screet 4071 Miniature Omnidirectional Microphones are the reliable workhorse you can count on.
The d:screetâ„¢ Miniature Microphones are the versatile workhorses that adapts to your needs. With eminent sound quality, a large range of accessories, and adapters available for all pro wireless systems, the d:screet Miniature Mics are the obvious choice for any application requiring a big sound and a small footprint.
The d:screetâ„¢ Miniature Microphones and accessories allow for a broad range of applications. Whether reproducing the voice or an instrument in either a film, theater, television, or other close-miking settings, the mics will not disappoint.
Specifications for d:screet™ 4071 Omnidirectional Microphone, Low-cut, Presence Boost
|Pre-polarized condenser element with vertical diaphragm|
|100 Hz – 15 kHz with typ. 5 dB soft boost at 4 – 6 kHz|
|6 mV/Pa ved 1 kHz; -44.4 dB re. 1 V/Pa|
|Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))|
|Typ. 38 dB (max. 40 dB)|
|68 dB (A)|
|< 1 % THD up to 123 dB SPL peak; < 1 % up to 120 dB SPL RMS sine|
|Typ. 97 dB|
|30 – 40 ohm|
|Up to 300 m (984 ft)|
|For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.|
|Black, beige or white|
|9 g (0.32 oz) incl. cable and MicroDot connector|
|5.4 mm (0.2 in)|
|17 mm (0.67 in)|
|1.8 m (5.9 ft)|
|1.6 mm (0.06 in)|
|Positively increasing sound pressure produces positive going voltage on MicroDot pin|
|-10 to 45°C (14 to 113°F)|