Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Email: sales@digibroadcast.com
Rated 4.74 / 5 stars trustedshops.co.uk
Free Delivery On Orders Over £300 incl VAT
Sell Your Gear Find Out More ›
Free Delivery On Orders Over £300 incl VAT

DPA d:fine 4166 Slim Omni Flex Earset Mic, 110 mm Boom, Brown, MicroDot

code: 4166-OL-F-C00-LE
  • £394.20
  • RRP: £435.00
Item Available | Usually dispatched within 24 hours
Loading...

The d:fine 4166 Omnidirectional Headset Microphone 4166 OL F C00 LE (4166-OL-F-C00-LE, 4166_OL_F_C00_LE, 4166/OL/F/C00/LE) combines the legendary sound of the d:fine 4066 Omnidirectional Capsule with a lightweight and flexible headset system. This condenser mic is easy and fast to adjust and it offers clean and transparent sound quality with lots of headroom. The capsule itself is the same type as the d:fine 4066, but is attached to an interchangeable boom arm.Like all of the microphones in the range, the d:fine 4166 Omnidirectional Headset Microphone offers accurate, natural voice intelligibility and very high SPL capabilities. Users can both speak and sing into the mic with no hint of distortion.This microphone is available as an earset (d:fine 4166) or headset (d:fine 4266). Earset variants are the quickest to put on and often the best choice when miking needs to be fast and easy for example for conference use. Headset variants sit more securely around the head and are ideal for active performance situations where the person wearing the headset won't feel the presence of the microphone. Both types are ergonomically designed to fit comfortably and easily. This mic adjusts to fit any ear size and head shape while at the same time it mounts securely and is hardly visible. By rotating the boom and the ear hook, the microphone can be easily used on either the left or the right ear. The connector splits the cable from the microphone boom allowing you to swap broken cables and / or wireless connectors quickly.Three boom lengths are available to accommodate different applications and head sizes: 40 mm (1.6 in), 90 mm (3.5 in) and 110 mm (4.3 in). The 110 mm (4.3 in) is the standard choice for most users.A bit about omnisAn omnidirectional microphone has sensitivity at all angles - in principle picking up sound equally from all directions. This gives you extremely natural and realistic sound compared to a cardioid mic. Omni mics are often used for picking up ambient sounds, as well as miking a large sound source such as a choir in a recording situation. Unfortunately, due to their pickup pattern, omnis can also produce a lot of feedback in live situations.Nonetheless, we recommend that you try a DPA omni first because, when used close to the sound source, the equal frequency response makes these mics a flexible addition in your audio toolbox. It will often give a more natural sound, it can handle extremely high sound pressure levels, it does not suffer from proximity effect and is not as sensitive to wind, pop or handling noise.

Specifications Directional pattern Omnidirectional Principle of operation Pressure Cartridge type Pre-polarized condenser Frequency range 20 Hz - 20 kHz Frequency range, ±2 dB 20 Hz - 20 kHz with 3 dB soft boost at 8 - 15 kHz Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A)) Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB) S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 68 dB(A) Total harmonic distortion (THD) < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine Dynamic range Typ. 97 dB Max. SPL, peak before clipping 144 dB Output impedance From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter Output balance principle Signal balanced with DAD6001-BC XLR Adapter Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter Power supply (for full performance) Min. 5 V to max. 50 V through DPA adapter for wireless systems Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter Connector MicroDot Color Black or beige Weight Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz) Microphone diameter 5.4 mm (0.21 in) Microphone length Boom length: Normal: 120 mm (4.7 in), Medium: 100 mm (3.9 in) Cable length 1.3 m (4.3 ft) Cable color Black or beige Cable diameter 1.6 mm (0.06 in) Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter) Electromagnetic compatibility (EMC) Fully compatible Temperature range -40°C to 45°C (-40°F to 113°F) Relative humidity (RH) Up to 90%
Be the first to review DPA d:fine 4166 Slim Omni Flex Earset Mic, 110 mm Boom, Brown, MicroDot. Write a review ›
Top