Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Free Delivery On Orders Over £250
Read Our Blog For Industry News & Tips
Sell Your Gear Find Out More ›

DPA FIDF00-M2 d:fine Dual-Ear Directional Headset Mic Beige

code: FIDF00-M2
  • £495.00
Item out of Stock | Usually dispatched within 24 hours
Free Delivery On Orders Over £250

DPA FIDF00-M2 (FIDF00M2, FIDF00 M2, FIDF00/M2, fidf00-m2) d:fine Dual-Ear Directional Headset Mic Beige Short 100 mm Boom MicroDot

d:fineâ„¢ Dual-ear Directional Headset Microphone 

Pristine audio quality

Dual-ear mounting for active situations

Rejects background noise

Adapts to all pro wireless systems

The DPA d:fineâ„¢ headset has the leading position when it comes to headworn microphones by combining absolute pristine audio quality with unique and simple mechanical solutions along side an extensive accessory line.

The d:fine has been ergonomically designed to fit easily and seamlessly. It will adjust to fit any ear size and head shape while mounting securely and hardly visible on both ears. The dual-ear mount is dedicated for more active situations and will be safe in even the most rigorous and energetic performance applications.

Just by rotating the boom and the earhooks, the microphone can be moved from left to right ear, or into the optimum position. The d:fine directional rejects side and background noise while creating higher separation from nearby sound sources which improves the gain-to-feedback ratio and gives more channel control. Yet still, natural voice intelligibility is preserved along with its very high SPL capabilities one can both speak and sing with no hint of distortion. This is where the DPA d:fine is head and shoulders above its competition.

Intensive protection against pop/wind noise is integrated in the microphone design and windscreens are included. Also included is a capsule protection cap, a cable clip which anchors the cable to your clothing and a color coded cable clip offering easy recognition of a specific headset among many.

A service connector splits the cable from the microphone boom and allows for quick exchange of cable lengths/colors/connectors and is valuable for servicing broken cables.

Available in black, beige, and brown, the DPA d:fine is delivered in a neat, professional roadworthy box with extra room for accessories like transmitters, batteries and more.

The DPA accessory line includes windscreens, power supplies and adapters or cables with fixed connectors (MicroDot, 3-pin Lemo, TA4F mini XLR, Mini-jack).


Whats in the box

Microphone (boom, ear-hook, cable)

Cable clip which anchors the cable to your clothing

Make-up and moisture filter (DUA0523) pre-mounted on the mic

Five identification rings and one make-up cover (DUA0585)

Three windscreens (DUA0531)



d:fine is also available in these versions:

directional, single-ear



Specifications for d:fine™ Dual-ear Directional Headset Microphone

Directional characteristics: Cardioid

Principle of operation: Pressure gradient

Cartridge type: Pre-polarized condenser

Frequency range: 20 Hz - 20 kHz

Frequency range, ± 2 dB, Near field 2-3 cm (0.8-1.2 in): 100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz

Sensitivity, nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa

Equivalent noise level, A-weighted: Typ. 28 dB(A) re. 20 µPa (max. 30 dB(A))

Equivalent noise level, ITU-R BS.468-4: Typ. 40 dB (max. 42 dB)

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 66 dB(A)

Total Harmonic Distortion (THD):

Dynamic range: Typ. 95 dB

Max. SPL, peak before clipping: 144 dB

Output impedance: From MicroDot: 30 - 40 ohm. From DAD6001-BC: 100 ohm

Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapter

Output balance principle: Signal balanced with DAD6001-BC XLR adapter

Common Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter

Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power +/- 4 V with DAD6001-BC XLR adapter

Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter.

Connector: MicroDot

Weight: Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz).

Microphone head size (h x w x d): 9.5 x 5.3 x 2.9 mm (0.37 x 0.21 x 0.11 in)

Capsule diameter: 5.4 mm (0.2 in)

Mic boom length: 120 mm (4.7 in)

Cable length: 1.3 m (4.3 ft)

Cable color: Black or beige

Cable diameter: 1.6 mm (0.06 in)

Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)

Electro Magnetic Compatibility (EMC): Fully compatible

Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)

Relative Humidity (RH): Up to 90%

Be the first to review DPA FIDF00-M2 d:fine Dual-Ear Directional Headset Mic Beige. Write a review ›