DPA FIDF10-2 (FIDF102, FIDF10 2, FIDF10/2, fidf10-2) d:fine Dual-Ear Directional Headset Mic, Beige, 120 mm Boom, TA4F Mini-XLR
d:fineâ„¢ Dual-ear Directional Headset Microphone
Pristine audio quality
Dual-ear mounting for active situations
Rejects background noise
Adapts to all pro wireless systems
The DPA d:fineâ„¢ headset has the leading position when it comes to headworn microphones by combining absolute pristine audio quality with unique and simple mechanical solutions along side an extensive accessory line.
The d:fine has been ergonomically designed to fit easily and seamlessly. It will adjust to fit any ear size and head shape while mounting securely and hardly visible on both ears. The dual-ear mount is dedicated for more active situations and will be safe in even the most rigorous and energetic performance applications.
Just by rotating the boom and the earhooks, the microphone can be moved from left to right ear, or into the optimum position. The d:fine directional rejects side and background noise while creating higher separation from nearby sound sources which improves the gain-to-feedback ratio and gives more channel control. Yet still, natural voice intelligibility is preserved along with its very high SPL capabilities one can both speak and sing with no hint of distortion. This is where the DPA d:fine is head and shoulders above its competition.
Intensive protection against pop/wind noise is integrated in the microphone design and windscreens are included. Also included is a capsule protection cap, a cable clip which anchors the cable to your clothing and a color coded cable clip offering easy recognition of a specific headset among many.
A service connector splits the cable from the microphone boom and allows for quick exchange of cable lengths/colors/connectors and is valuable for servicing broken cables.
Available in black, beige, and brown, the DPA d:fine is delivered in a neat, professional roadworthy box with extra room for accessories like transmitters, batteries and more.
The DPA accessory line includes windscreens, power supplies and adapters or cables with fixed connectors (MicroDot, 3-pin Lemo, TA4F mini XLR, Mini-jack).
Whats in the box
Microphone (boom, ear-hook, cable)
Cable clip which anchors the cable to your clothing
Make-up and moisture filter (DUA0523) pre-mounted on the mic
Five identification rings and one make-up cover (DUA0585)
Three windscreens (DUA0531)
d:fine is also available in these versions:
Specifications for d:fine™ Dual-ear Directional Headset Microphone
Directional characteristics: Cardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range, ± 2 dB, Near field 2-3 cm (0.8-1.2 in): 100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz
Sensitivity, nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 28 dB(A) re. 20 µPa (max. 30 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 40 dB (max. 42 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 66 dB(A)
Total Harmonic Distortion (THD):
Dynamic range: Typ. 95 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: From MicroDot: 30 - 40 ohm. From DAD6001-BC: 100 ohm
Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Output balance principle: Signal balanced with DAD6001-BC XLR adapter
Common Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power +/- 4 V with DAD6001-BC XLR adapter
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter.
Weight: Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz).
Microphone head size (h x w x d): 9.5 x 5.3 x 2.9 mm (0.37 x 0.21 x 0.11 in)
Capsule diameter: 5.4 mm (0.2 in)
Mic boom length: 120 mm (4.7 in)
Cable length: 1.3 m (4.3 ft)
Cable color: Black or beige
Cable diameter: 1.6 mm (0.06 in)
Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
Electro Magnetic Compatibility (EMC): Fully compatible
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%