Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Email: Sales@digibroadcast.com
Free Delivery On Orders Over £250
Read Our Blog For Industry News & Tips
Sell Your Gear Find Out More ›

DPA ST2006A, ST2006, A ST2006-A, ST2006/A Stereo Pair w. 2 x 2006A, Clips, Windscreens in Peli Case

code: ST2006A
  • £1,299.00
  • RRP: £1,465.00
Item Available | Usually dispatched within 24 hours
Loading...
Free Delivery On Orders Over £250

DPA ST2006A (ST2006, A ST2006-A, ST2006/A) Stereo Pair w. 2 x 2006A, Clips, Windscreens in Peli Case

FEATURES:

  • Sensitivity selected pair
  • Acoustic authenticity
  • Linear in a large frequency bandwidth
  • PeliTM Case transportation and protection

The DPA ST2006A is a complete DPA 2006A Stereo Pair with two handpicked omni microphones, selected on sensitivity within ±1.5 dB.

As main AB stereo pair the 2006As deliver precise acoustic fingerprint and true tone. Orchestra, acoustic piano, guitar, wind instruments and choirs are among the most evident applications for this high-value-for-money pair.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone and accessory inlays.

Included in this kit:

  • Two carefully matched 2006A omni microphones, sturdy PeliTM case, holders, and windscreens.

 

Specifications for d:dicate™ ST2006A Stereo Pair with 2006A Omnis

Directional pattern: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
Frequency range: 20 Hz - 20 kHz
Frequency range, ± 2 dB: 50 Hz - 20 kHz with typ. 3 dB soft boost at 14 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A)
Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 130 dB SPL peak
Dynamic range: Typ. 114 dB
Max. SPL, peak before clipping: 141 dB
Switchable attenuator: 0 dB / -20 dB
Output impedance: < 200 ohm
Minimum load impedance: 2 kohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 60 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color: Matte black
Weight: 160 g (5.6 oz)
Microphone diameter: 19 mm (0.75 in)
Length: 164 mm (6.5 in)
Output voltage, RMS: > 5 V
Polarity: +V at pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%
Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB

 

Be the first to review DPA ST2006A, ST2006, A ST2006-A, ST2006/A Stereo Pair w. 2 x 2006A, Clips, Windscreens in Peli Case. Write a review ›
Build Your Own Bundle
Top