Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Email: Sales@digibroadcast.com
Free Delivery On Orders Over £250
Read Our Blog For Industry News & Tips
Sell Your Gear Find Out More ›

DPA ST4011C, ST4011 C, ST4011-C, ST4011/C Stereo Pair w. 2 x 4011C, Clips, Windscreens in Peli Case

code: ST4011C
  • £2,089.00
  • RRP: £2,420.00
Item Available | Usually dispatched within 24 hours
Loading...
Free Delivery On Orders Over £250

DPA ST4011C (ST4011 C,  ST4011-C,  ST4011/C) Stereo Pair w. 2 x 4011C, Clips, Windscreens in Peli Case

  FEATURES:

  • Excellent for both PA/Live and recording 
  • Carefully matched within ± 1 dB
  • Low profile mounting options
  • PeliTM Case transportation and protection

Whenever a small, lightweight, inconspicuous microphone for top-quality sound is required, the compact design and uniform unidirectional response of our versatile 4011C makes it the perfect choice. They are particularly popular as spot mics for classical recording and on-stage close mics for live sound.

The DPA ST4011C is a complete DPA 4011C Stereo Pair with two carefully factory-matched first order cardioid microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer.

The specially selected DPA 4011C microphones are matched within ±1 dB on both frequency response and sensitivity.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.

Included in this kit:

  • Two carefully matched 4011C cardioid microphones, sturdy PeliTM case, holders, and windscreens.

 

Specifications for d:dicate™ ST4011C Stereo Pair with 4011C Compact Cardioids

Directional pattern: Cardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range, ± 2 dB, at 30 cm: 40 Hz - 20 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB(A)
Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
Dynamic range: Typ. 121 dB
Max. SPL, peak before clipping: 152 dB
Output impedance: < 200 ohm
Minimum load impedance: 2 kohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 50 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color: Matte black
Weight: 58 g (2 oz)
Microphone diameter: 19 mm (0.75 in)
Capsule diameter: 19 mm (0.75 in)
Microphone length: 64 mm (2.5 in)
Output voltage, RMS: > 4 V
Polarity: +V at pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%
Matching tolerance: ± 1 dB
Phase deviation for kit: < 10°

 

Be the first to review DPA ST4011C, ST4011 C, ST4011-C, ST4011/C Stereo Pair w. 2 x 4011C, Clips, Windscreens in Peli Case. Write a review ›
Build Your Own Bundle
Top