Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Email: Sales@digibroadcast.com
Free Delivery On Orders Over £150
Read Our Blog For Industry News & Tips
Sell Your Gear Find Out More ›

DPA ST4015A, ST4015 A, ST4015-A, ST4015/A Stereo Pair w. 2 x 4015A, Clips, Windscreens in Peli Case

code: ST4015A
  • £2,299.00
  • RRP: £2,650.00
Item Available | Usually dispatched within 24 hours
Loading...
Free Delivery On Orders Over £150

DPA ST4015A (ST4015 A, ST4015-A,  ST4015/A) Stereo Pair w. 2 x 4015A, Clips, Windscreens in Peli Case

 

FEATURES:

  • Wide pickup area and natural sound
  • Ambience pickup with some directionality
  • Carefully matched within ±1 dB
  • PeliTM Case transportation and protection

Recording orchestras or other acoustic ensembles sometimes requires a compromise between blending in the room reverberation and a more precise localization. The wide cardioid (also known as hemispheric) design covers a greater sound angle and is also an excellent choice for grand piano, guitar, marimba, and percussion, or as a spot mic for groups in a symphony orchestra.

The DPA ST4015A is a complete DPA 4015A Stereo Pair with two carefully factory-matched wide cardioid microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer.

The specially selected DPA 4015A microphones are matched within ±1 dB on both frequency response and sensitivity.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.

Included in this kit:

  • Two carefully matched 4015A wide cardioid microphones, sturdy PeliTM case, holders, and windscreens.

Specifications for d:dicate™ ST4015A Stereo Pair with 4015A Wide Cardioids

Directional pattern: Wide cardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range, ± 2 dB, at 60 cm: 40 Hz - 20 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB(A)
Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
Dynamic range: Typ. 121 dB
Max. SPL, peak before clipping: 159 dB
Switchable attenuator: 0 dB / -20 dB
Output impedance: < 200 ohm
Minimum load impedance: 2 kohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 60 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color: Matte black
Weight: 158 g (5.6 oz)
Microphone diameter: 19 mm (0.75 in)
Capsule diameter: 19 mm (0.75 in)
Microphone length: 170 mm (6.7 in)
Output voltage, RMS: > 5 V
Polarity: +V at pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%
Matching tolerance: ± 1 dB
Phase deviation for kit: < 10°

 

Be the first to review DPA ST4015A, ST4015 A, ST4015-A, ST4015/A Stereo Pair w. 2 x 4015A, Clips, Windscreens in Peli Case. Write a review ›
Build Your Own Bundle
Top