Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Free Delivery On Orders Over £250
Read Our Blog For Industry News & Tips
Sell Your Gear Find Out More ›

DPA VO10-classic d:vote Touring Kit

code: VO10-classic
  • £3,800.00
Item out of Stock | Usually dispatched within 24 hours
Free Delivery On Orders Over £250

DPA VO10-Classic d:vote 4099 Classic Touring Kit, 10 Mics and accessories for Normal SPL

• Excellent frequency and phase response

• Capable of handling extremely high SPLs

• Compact, discreet size

• Versatility in mounting options

• Detachable cable and versatile gooseneck extender

Ready for on-the-road-use for rental companies, musicians or theatres, the d:vote 4099 Rock Touring Kits offer a wide selection of microphones and accessories selected for typical use.

The close microphone placement to sound levels like violins or guitars requires microphones with normal sensitivity in order not to clip the following input stages.

A detachable lightweight cable from gooseneck to the XLR adapter makes it convenient to mount the mic on an instrument before connecting it. The extremely flexible cable does not weigh down the instrument. In case of cable break, service is easy and fast.

The low profile and unobtrusive design provides visual elegance along with uncompromised sound quality and accurate dynamics for the vast majority of instruments.

The unique and flexible clip-on system provides fast, stable and repeatable positioning. The mics can be easily positioned at different angles via the flexible gooseneck to match different radiation patterns and allow a variety of sound nuances. The d:vote 4099 Touring Kits include a 3-pin XLR phantom power adapter with belt clip.

Standard gooseneck length is 140 mm (5.5 in), which can be altered with the optional gooseneck extension unit, adding another 50% to the length, helping to achieve exactly the sweet spot for the instrument.

A wide range of connection adapters makes it possible to use DPA miniature microphones with all professional UHF, VHF or digital wireless system available plus 48 V Phantom.

The packages include:

  • 10 x d:voteâ„¢ 4099 Instrument Microphones
  • 10 x Microdot adapters
  • 10 x Miniature Microphone Cables
  • 8 x Clips for Violin
  • 3 x Clips for Cello
  • 2 x Clips for Piano
  • 4 x Clips for Guitar
  • 2 x Clips for Sax/Trumpet
  • 2 x Universal Clips
  • 2 x Clips for Bass
  • 2 x Clips for Drum
  • 1 x Peli Case


Transducer Type Pre-Polarized Condenser

Polar Pattern Supercardioid

Principle of Operation Pressure Gradient

Frequency Range 20 Hz to 20 kHz

+/- 2 dB, 20 cm Distance: 80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz

Sensitivity 2 mV/Pa; -54 dB Reference: 1 V/Pa (Nominal, +/- 3dB)

Equivalent Noise Level Typ. 28 dB(A) Reference: 20 µPa (Maximum 31 dB(A)) (A-Weighted)

Signal to Noise Ratio 66 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL)

Total Harmonic Distortion (THD) < 1 % up to 123 dB SPL peak

< 1 % up to 120 dB SPL RMS sine

Dynamic Range 95 dB

Maximum SPL 152 dB (Peak Before Clipping)

Output Impedance MicroDot: 30 to 40 Ω 

XLR: 100 Ω

Cable Drive Capability XLR: 984' (300 m)

Output Balance Principle Signal balanced with XLR adapter

Power Supply Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems

48 V phantom power ±4 V with XLR adapter

Current Consumption MicroDot: 1.5 mA

XLR Adapter: 3.5 mA

Connector MicroDot

CMRR XLR Adapter: > 60 dB @ 50 Hz to 15 kHz

Polarity Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)

Operating Temperature -40° to 113°F (-40° to 45°C)

Relative Humidity Up to 90%

Gooseneck Length: 5.5" (140 mm)

Capsule Diameter 0.2" (5.4 mm)

Microphone Length 1.8" (45 mm)

Be the first to review DPA VO10-classic d:vote Touring Kit. Write a review ›
Build Your Own Bundle