DPA VO4-classic d:vote Touring Kit 4 mics and accessories for Normal SPL
â€¢ Excellent frequency and phase response
â€¢ Capable of handling extremely high SPLs
â€¢ Compact, discreet size
â€¢ Versatility in mounting options
â€¢ Detachable cable and versatile gooseneck extender
Ready for on-the-road-use for rental companies, musicians or theatres, the d:vote 4099 Rock Touring Kits offer a wide selection of microphones and accessories selected for typical use.
The close microphone placement to sound levels like violins or guitars requires microphones with normal sensitivity in order not to clip the following input stages.
A detachable lightweight cable from gooseneck to the XLR adapter makes it convenient to mount the mic on an instrument before connecting it. The extremely flexible cable does not weigh down the instrument. In case of cable break, service is easy and fast.
The low profile and unobtrusive design provides visual elegance along with uncompromised sound quality and accurate dynamics for the vast majority of instruments.
The unique and flexible clip-on system provides fast, stable and repeatable positioning. The mics can be easily positioned at different angles via the flexible gooseneck to match different radiation patterns and allow a variety of sound nuances. The d:vote 4099 Touring Kits include a 3-pin XLR phantom power adapter with belt clip.
Standard gooseneck length is 140 mm (5.5 in), which can be altered with the optional gooseneck extension unit, adding another 50% to the length, helping to achieve exactly the sweet spot for the instrument.
A wide range of connection adapters makes it possible to use DPA miniature microphones with all professional UHF, VHF or digital wireless system available plus 48 V Phantom.
The packages include:
4 x d:voteâ„¢ 4099 Instrument Microphones
4 x Microdot adapters
4 x Miniature Microphone Cables
4 x Clips for Violin
2 x Clips for Cello
1 x Clips for Guitar
1 x Clips for Sax/Trumpet
1 x Universal Clips
1 x Clip for Bass
1 x Peli Case
Transducer Type Pre-Polarized Condenser
Polar Pattern Supercardioid
Principle of Operation Pressure Gradient
Frequency Range 20 Hz to 20 kHz
+/- 2 dB, 20 cm Distance: 80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz
Sensitivity 2 mV/Pa; -54 dB Reference: 1 V/Pa (Nominal, +/- 3dB)
Equivalent Noise Level Typ. 28 dB(A) Reference: 20 µPa (Maximum 31 dB(A)) (A-Weighted)
Signal to Noise Ratio 66 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL)
Total Harmonic Distortion (THD) < 1 % up to 123 dB SPL peak
< 1 % up to 120 dB SPL RMS sine
Dynamic Range 95 dB
Maximum SPL 152 dB (Peak Before Clipping)
Output Impedance MicroDot: 30 to 40 Ω
XLR: 100 Ω
Cable Drive Capability XLR: 984' (300 m)
Output Balance Principle Signal balanced with XLR adapter
Power Supply Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems
48 V phantom power ±4 V with XLR adapter
Current Consumption MicroDot: 1.5 mA
XLR Adapter: 3.5 mA
CMRR XLR Adapter: > 60 dB @ 50 Hz to 15 kHz
Polarity Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Operating Temperature -40° to 113°F (-40° to 45°C)
Relative Humidity Up to 90%
Gooseneck Length: 5.5" (140 mm)
Capsule Diameter 0.2" (5.4 mm)
Microphone Length 1.8" (45 mm)