Call: +44(0) 208 397 1407
Fax: +44(0) 208 307 5055
Email: Sales@digibroadcast.com
Free Delivery On Orders Over £300 incl VAT
Read Our Blog For Industry News & Tips
Sell Your Gear Find Out More ›
Free Delivery On Orders Over £300 incl VAT
Sell Your Gear
warranty on this product

Sennheiser Dante Kit MEG 14-40 basic with SL DI 4 XLR Interface, Four MAT 133 Table Stands, & Four MEG 14-40 Gooseneck Microphones

code: 508208
  • £1,541.67
  • RRP: £1,541.67
Item Available | Usually dispatched within 24 hours
Loading...

Features

  • Great speech-intellibility
  • Phantom power via PoE
  • Remote controllable gain level
  • Daisy-chaining possible

Sennheiser 508208 (508/208, 508-208, 508 208, 50-82-08) (Dante-Kit MEG 14-40 basic, Dante/Kit MEG 14-40 basic, Dante Kit MEG14-40 basic) Dante Kit MEG 14-40 basic with SL DI 4 XLR Interface, Four MAT 133 Table Stands, & Four MEG 14-40 Gooseneck Microphones 

The MAT 133-S with the MEG 14-40 is as versatile as it is easy to operate. Experience clearly structured meetings and discussions as the intuitive handling will lead the focus on the content – not the technology. The proven Sennheiser KE 10 capsule provides best speech intelligibility.

Powered by the SL DI 4 XLR with just a standard XLR 3 cable, the microphone is integrated in a bigger setup with a finger snap and makes even spontaneous discussion setups possible.

The SL DI 4 XLR four input Dante™ preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante™ system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR.

 

MEG 14-40

  • Impedance: < 100 Ω 
  • Dimensions: length: 450 mm (17,72") 
  • Transducer principle (Microphone): pre polarised condenser microphone 
  • Frequency response: 50 Hz - 20 kHz 
  • Weight: 147 g (4,72 oz) 
  • Pick-up pattern: cardioid 
  • Operating temperature: 0° ... + 40 °C 
  • Equivalent noise level: 26 dB (A) 
  • Equivalent noise level weighted as per CCIR 468-3: 37 dB 
  • Maximum sound pressure level (passiv): 130 dB SPL 
  • Power supply: P12 - P48 V 
  • Current consumption: 3 mA 

MAT 133-S

  • Dimensions: 120 x 170 x 43 mm (BTH / WDH) 
  • Connector: Mic in: XLR-3F 
  • Connector: Mic out: XLR-3M 
  • Connector: Logic: clip contact for logic, Pin assignment: trigger signal at the logic connector: Logic in (external LED control), GND, Logic out (switch signal) 
  • Weight: 1210 g 
  • Phantom powering: P 24 - P 48 
  • Operating temperature: -10° - +50°C 
  • Current consumption: 3.7 mA 
  • Output voltage: Logic out: high level output voltage > 2.4 V, low level output voltage < 0.4 V 
  • Output voltage: Logic in: high level input voltage > 2.0 V, low level input voltage < 0.8 V 
  • Colour: LED light ring: red / green 

SL DI 4 XLR

  • Power consumption: 500 mA 
  • Phantom powering: P 48 
  • Power supply: 12 V DC 
  • Powering: 12V DC or 802.3af PoE 
  • Communication: Dante Interface 
  • Connection: Audio In: 4x XLR3F Ethernet / Dante ™: 2x RJ 45 (1x with PoE) PowerLink: 2x 2pole connector 

In The Box

  • 1 SL DI 4 XLR
  • 4 MAT 133-S
  • 4 MEG 14-40
Be the first to review Sennheiser Dante Kit MEG 14-40 basic with SL DI 4 XLR Interface, Four MAT 133 Table Stands, & Four MEG 14-40 Gooseneck Microphones. Write a review ›
Top