DPA 4041-S (4041S 4041 S 4041/S) Large Diaphragm Microphone, Solid State, 130 V
The 4041-S is an omnidirectional microphone that uses the Large Diaphragm Capsule MMC4041 with the totally transparent MMP4000-S Solid State Preamplifier.
The cartridge MMC4041 can be unscrewed from the preamplifier which allows for the exchange of the preamplifier module.
The frequency response from 10 Hz to 20 kHz with a 4-6 dB soft boost around 8 kHz matches the response of the highly acclaimed Type 4040 Hybrid Microphone.
Specifications for d:dicate™ 4041-S Large Diaphragm Microphone, Solid State, 130 V
|Principle of operation:||Pressure|
|Cartridge type:||24 mm (1 in) condenser w. stainless steel diaphragm|
|Frequency range, ± 2 dB:||10 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz|
|Sensitivity, nominal, ±2 dB:||90 mV/Pa;-21 dB re. 1 V/Pa|
|Equivalent noise level A-weighted:||Max. 7 dB(A) re. 20 µPa|
|Equivalent noise level ITU-R BS.468-4:||Max. 19 dB|
|S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):||87 dB|
|Total harmonic distortion (THD):||< 1% THD up to 126 dB SPL peak|
|Dynamic range:||Typ. 119 dB|
|Max. SPL, peak before clipping:||144 dB|
|Output impedance:||Matches external power supply input|
|Cable drive capability:||From microphone to external power supply: Up to 20 m (66 ft). From external power supply: Up to 300 m (984 ft)|
|Power supply:||Via external power supply|
|Connector:||7-pin modified XLR-M (High Voltage)|
|Weight:||190 g (6.7 oz)|
|Length:||170 mm (6.7 in)|