The NT1000 1" Studio Condenser Microphone from Rode features transformerless circuitry, giving the mic an ultra-low self-noise level of 6 dBA. It can be used to capture audio for both vocal and instrument applications and is well-suited for grand piano and drum overheads. It is built with a 3-pin XLR connector and requires 24 or 48V phantom power to operate. Also included is a RM2 ring-mount microphone stand and a ZP1 padded zip pouch.
Cardioid Polar Pattern
The cardioid pick-up pattern is effective in minimizing noise from off-axis sections of the microphone such as monitors, instruments, room ambiance, etc.
The gold-plated diaphragm provides transparent signal reproduction and frequency response. The diaphragm is internally shockmounted, providing protection against potential damage.
Wide Frequency Response
The NT1000's 20 Hz to 20 kHz frequency response allows the microphone to be used in a variety of applications.
Acoustic Principle: Pressure Gradient
Active Electronics: Unity-gain closed-loop impedance converter; JFET input with bipolar buffering
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100Ω
Maximum SPL: 140dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level: 13.0dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 6dB-A
Power Options: +48V phantom power+24V phantom power
Dimensions: 209.00mmH x 54.00mmW x 54.00mmD
Output: XLR Output
In the Box
Rode NT1000 1" Studio Condenser Microphone
Stand Mount for NTK/NT1000 & Condenser Microphones
ZP1 Zip Pouch
Be the first to review Rode NT1000 Studio Condenser Microphone. Write a review ›