Sachtler Video 18S1 tripod with ENG speed lock legs used
3 months warranty
Very Good condition
The Sachtler Video 18 S1 Fluid Head
The Video 18 S1 Fluid Head from Sachtler offers a broader payload range and a faster, simpler balancing system--it can now be balanced more quickly and easily than ever before. Due to the broader payload range, the Video 18 S1 is no longer limited to ENG and EFP uses and can now be used with a greater spectrum of cameras, including DSLRs. The new 16-step counterbalance system allows for exceptionally fine degrees of tuning. The Video 18 S1 can operate effectively with a minimum payload as light as 4.4 lb (2 kg).
Thanks to the fairly high density of the tripod heads in relationship to the camera, the heads are able to provide greater precision in panning than small and/or lightweight heads.
There is also a Boost Button for a quick payload range shift and the Video 18 S1 is therefore not only suitable for a DSLR camera shooting HD videos with a film-like setup and appropriate accessories, or more conventional digital and HDV camcorders in the ENG area (for example, when switching out a shoulder-mount camera for a handheld HDV camcorder or DSLR). The reliable Speedbalance technology enables quick and fine adjustment, no matter what camera you're using.
The Video 18 S1 can be used with a wide variety of cameras. The payload range can be switched between "High" and "Low" with the Boost Button, according to the weight of the camera.
The 16-step counterbalance guarantees a closely stepped balancing of the camera system. Seven horizontal and seven vertical adjustable grades of drag (+0) ensure jolt-free pans and tilts.
The parking position for spare screws (Pin, 1/4", 3/8") ensures that the operator can quickly locate the correct mounting hardware no matter which camera is being used.
Sachtler 5586 speed lock legs
The fastest Sachtler tripod SpeedLock CF is the perfect solution in the EB-range for camera bodies of up to 40 kg. The dual extractible tripod is locked with just three simple steps thanks to the patented quick clamping system. In addition, this best-seller boasts maximum torsional rigidity with its low weight of only 3 kg
Sachtler 7004 rubber feet
Set with 3 rubber feet for 100/150 mm tripods (except flowtech™, Cine tripods) and SOOM TriPod.
Sachtler 7007 mid level spreader
This Mid-Level Spreader from Sachtler fits all 100 and 150mm bowls (except for short tripods), OB-2000M, Cine 2000, and Cine 2000 medium tripods. It is used when shooting on uneven surfaces such as steps, rocky ground, or slopes. It allows for rapid setup and pull-down by keeping tripod legs at an equal or preset distance relative to each other. It attaches to the center bracket of a tripod and its arms are telescopic to allow for extension of a tripod leg without detaching the spreader.
Load Capacity 4-40 lbs (2-18kg)
Diameter/Thread 100mm Bowl, integrated flat base fitting
Counter Balance System 16 Steps + Boost Button
Quick Release/Wedge Plate Touch & Go Plate 16
Balance Plate 4.7" (120mm)
Tilt Drag 7 Steps
Tilt Range +90° to -70°
Tilt Lock Independent
Pan Drag 7 Steps
Pan Range 360°
Pan Lock Independent
Leveling Bubble/Illuminated Yes/Yes
Temperature Range -40° to +140°F (-40° to +60°C)
Height 6.8" (17.3cm)
Weight 7.3 lbs (3.3kg)
Sachtler 5586 speed lock legs:
Weight: 3 kg
Payload: 0-40 kg
Material: Carbon Fibre
Height range: 46 – 155 cm
Head fitting: 100 mm
Transport length: 70 cm
Sachtler 7004 rubber feet:
Weight: 0,58 kg
Payload: 95 kg
Diameter: 7,2 cm
Height: 4 cm
Sachtler 7007 mid level spreader:
Weight: 0,75 kg
Build Radius range: 28 – 46 cm
Sachtler 18S1 tripod kit includes the following: