Call: +44(0) 208 397 1407
Rated 4.75 / 5
Sell Your Gear Find Out More ›
Covid-19 Update Open as usual
Free Delivery On Orders Over £300 incl VAT

DJI Ronin 2 Professional Combo

code: 415014163
Special order item- Non Returnable
  • £5,414.83
  • RRP: £5,415.83
Status | Usually dispatched within 24 hours


  • Most versatile professional 3-axis stabilization system
  • Monocoque carbon fiber frame design
  • High torque motors supporting cameras up to 30 lbs
  • Fine tune balancing for precision control
  • Self-heating hot-swappable batteries
  • On-board power for camera and accessories
  • Integrated camera controls
  • Built-in GPS & compatible with DJI A3 Flight Controller

DJI 415014163 (415/014163, 415-014163 ,415/014/163, 415-014-163) (Ronin-2, Ronin/2, Ronin2) Ronin 2 Professional Combo

Ronin 2 exists to let filmmakers capture the scene they see in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car and keep it moving smoothly in flight.


Ronin 2 exists to let filmmakers capture the scene they see in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car and keep it moving smoothly in flight.

Accessory Support

With the new Ronin power hub, essential accessories such as DJI Focus and wireless video transmission systems could gain power and communicate data with Ronin 2.


A newly designed detachable Grip allows Ronin 2 to stand up on its own and is easily separated when the lower part of the hand grip is not needed.

Ronin 2 is also highly compatible with cable cams, drones, cranes, Steadicams, and more.


The simplicity of Ronin has been amplified with Ronin 2, making setup and use easier than ever. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.

Intergated Screen

A dedicated ultra-bright touch screen for settings and adjustments has been integrated into Ronin 2, streamlining and accelerating gimbal setup. Tactile buttons including motor pause are now easily within reach.

Intuitive Software

The extensively refined, redesigned and expanded Gimbal Assistant app, helps to create content with minimum effort via new features such as CamAnchor, Timelapse, and Panorama, providing a more intuitive and easier to use full control system for Ronin 2.


Power systems are now tightly integrated into Ronin 2, capable of powering its motors and the attached camera and accessories without dangling cables or multiple power systems. As it uses a dual battery system, filmmakers can hot swap to keep the camera and accessories powered and maximize shooting time.


Every element of Ronin 2 has been designed to maximize reliability, from materials to the splash-proof enclosed motor design, cable management, and redundancy. All of this creates a system that shines in the most demanding of shooting environments.

Accessory Powering

Two batteries on Ronin 2, and the ability to run with only one allows batteries to be charged and swapped without interrupting a shoot.

Installed cameras, monitors, or accessories, including the DJI Focus, can be powered by Ronin 2 batteries through integrated cabling and ports, eliminating dangling cables.

Carbon Fiber Build

A carbon fiber build enables Ronin 2 to perform well in extreme weather conditions. Light and durable, it is reliable in the most testing scenarios.

Ultra-Durable Batteries

Robust and resilient in extreme weather conditions, Ronin 2's self-heating batteries ensure stable power output for high-performance in temperatures as low as -4°F (-20°C) and high heat environments. Dual batteries capable of operating simultaneously and independently provide complete redundancy, keeping the shoot going.

Integrated GPS

The built-in GPS provides Ronin 2 with essential information for gimbal acceleration and speed, which is crucial for maintaining the camera’s position and the horizon level when moving at high speeds.


  • Built-In Functions: Operation Modes: Underslung Mode, Upright Mode, Briefcase Mode, Handheld, Car Mount, Aerial & Tripod Mode , Axis Modes: 3-axis, Pan-Lock, Built-in, independent IMU module, DJI Advanced 32-Bit ARM Processor, DJI Specialized Gimbal Drive Motors with Encoders, Dual Battery System, Bluetooth Module, D-Bus Receiver Supported, 2.4 GHz/5.8 GHz Receiver, Temperature Sensors, Built-in Touch Panel, Built-in GPS, USB Type-C Connection, Power and Video Signal through Slip Ring


  • Camera Tray Dimensions: Maximum depth from the center of gravity on camera base plate: 245 mm, Maximum height measured from top of the camera base plate: 165 mm
  • Maximum width: 180 mm
  • Accessory Power Connections: 14.4 V x 4 Camera Cage (Combined 8 A), 14.4 V x 2 Pan Motor (Combined 4 A), 14 V x2 P-Tap (8 A)
  • GCU Input Power: Intelligent Battery: 4280 mAh-22.8 V
  • Connections: 2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C
  • PC Assistant Software Requirements: Windows 7 or above; Mac OS X 10.11 or above
  • Mobile Assistant Software Requirements: iOS 9 or above; Android 4.4 or above

Mechanical & Electrical Characteristics

  • Working Current: Static current: 300 mA (@22.8 V), Dynamic current: 500 mA (@22.8 V), Locked motor current: Max 15 A (@22.8 V)
  • Run Time: 8 hours, 2.5 hours (when powering gimbal, camera and accessories at the same time)
  • Operating Temperature: -4°F ~ 122°F (-20°C ~ 50°C)
  • Weight: Including handle bar: 14 lb (6.4 kg), Excluding handle bar: 11 lb (5.0 kg)
  • Gimbal Dimensions: Excluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H), Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)

Working Performance

  • Load Weight (Reference Value): 30 lbs (13.6 kg)
  • Angular Vibration Range:  ± 0.02°
  • Maximum Controlled Rotation Speed: Pan axis: 360°/s, Tilt axis: 360°/s, Roll axis: 360°/s
  • Mechanical Endpoint Range: Pan axis control: 360° continuous rotation, Tilt axis control: ±135°, Roll axis control: ±220°
  • Controlled Rotation Range: Pan axis control: 360° continuous rotation, Tilt axis control: ±135°, Roll axis control: ±30°

In The Box

  • 1x Ronin 2 Gimbal
  • 1x Grip
  • 1x Remote Controller
  • 2x TB50 Intelligent Battery
  • 1x TB50 Battery Mount
  • 1x Battery Charger
  • 1x Battery Charger Power Cable
  • 1x Quad Charging Hub
  • 1x Ronin 2 Power Hub
  • 1x Camera Top Cross Bar
  • 1x Camera Base Plate
  • 1x Accessory Mount 115mm Rod
  • 1x 15mm Focus Rod Mount
  • 1x Ronin 2 Universal Mount
  • 1x Top Mounting Block
  • 1x MotionBlock
  • 1x Neck Strap
  • 1x Water Tight Protective Case (with custom foam)
  • 1x Accessories Package (Screws and Hex Keys)
  • 1x ARRI Alexa Mini Power Cable
  • 1x ARRI Alexa Mini Start/Stop Cable
  • 1x RED Power Cable
  • 1x RED RCP Control Cable
  • 1x Ronin 2 Power Cable
  • 1x 2-pin Power Cable
  • 1x DC Power Cable
  • 1x Triple P-TAP Breakout Box
  • 1x SDI IN Cable
  • 1x SDI OUT Cable
  • 1x USB Type-C Data Cable
  • 1x UART to D-BUS Cable
  • 1x Multi Tool
  • 5x Camera Screw 3/8-16
  • 5x Camera Screw 1/4-20
  • 8x Screws M4-10
  • 4x Screws M4-14
  • 4x Screws 1/4


Be the first to review DJI Ronin 2 Professional Combo. Write a review ›