Call: +44(0) 208 397 1407
Rated 4.75 / 5
Sell Your Gear Find Out More ›
Covid-19 Update Open as usual
Free Delivery On Orders Over £300 incl VAT

Wooden Camera Master Top Handle with Universal Center Screw Channel

code: WC-253100
  • £723.16
  • RRP: £785.00
Availability | Usually dispatched within 24 hours


  • While cameras like the RED DSMC2 and similar can benefit from specific MTH brackets, this centre channel will attach to just about any camera top and top cheeseplate
  • Modular handle for attaching to top, over the back, and down behind the battery
  • Combine with AIR EVF Mount for ideal rental house configuration
  • Great for Panasonic VariCams, URSA Mini, Canon C700, and many more

Wooden Camera WC-253100 (WC 253100, WC_253100, WC/253100, WC253100) Master Top Handle with Universal Center Screw Channel

Master Top Handle (Universal Centre Screw Channel) is a modular handle system designed for larger camera builds and back of camera operation. The handle features two centre screws channels that can accommodate spacings up to 92mm (3.6 inches) apart and can be installed on a wide variety of cameras. The Master Top Handle attaches to the top of the camera by 1/4-20 or 3/8-16 screws making it extremely secure and ARRI locating pins can be installed to match the MAP-2 on Alexa Mini and Top Plate (VariCam LT).

Included in the kit is the main handle section which has a hot shoe mount in front as well as a 15mm rod opening with thumbscrew. Also attached to the front is a 15mm LW rod bracket for adding pass through top rods or our AIR EVF Systems. The rear portion of the handle also features a 15mm opening and is clamped down using an M4 screw. 1/4-20 and 3/8-16 mounting points are available on three sides, as well as the ARRI standard accessory mount.

Three extensions, in different lengths and a bend piece, are included to build the handle out further over the lens area, toward the rear, over the module and battery area, and down the back side behind the battery.

Extensions are added easily and securely by inserting at the correct angle aligning the tab and slot, rotating clockwise, and then pushing in again. This multi-action attachment method prevents the extensions from accidentally being removed. Once pushed into place, simply tighten the screw to keep it locked in position.

  • Weight: 824 g (1.85 lbs)
  • Dimensions: 100.16 x 196.85 x 476.25 mm (4x 7.75 x 18.75 in)

In the box

  • 1x Wooden Camera Universal Handle
Be the first to review Wooden Camera Master Top Handle with Universal Center Screw Channel. Write a review ›