Call: +44(0) 208 397 1407
Rated 4.97 / 5
Sell Your Gear Find Out More ›
Free Delivery On Orders Over £300 incl VAT

Miller 3747 CX8 75 Sprinter II 2 Stage Carbon Fibre Tripod System with Mid-Level Spreader and Softcase

code: 3747
  • £2,962.89
  • RRP: £3,249.00
Status   |   Usually dispatched within 24 hours


  • Compact, light and versatile
  • 75mm ball levelling
  • Perfect for payloads to 0-12kg (26.4bs)
  • 15+0 CB Plus selectable counterbalance positions
  • Ergonomically located CB Plus switch
  • 5+0 selectable positions of fluid pan and tilt drag
  • Positive selection radial ring controls
  • 2-stage dual action lock extension
  • Lightweight carbon fibre legs
  • Comes with 2-stage tripod bag

Miller 3747 (37-47, 37/47, 37 47, 37_47) CX8 75 Sprinter II 2 Stage Carbon Fibre Tripod System with Mid-Level Spreader and Softcase

Mount your DSLR, mirrorless, cine, or ENG camera using this complete CX8 Head and 75 Sprinter II Carbon Fiber Tripod with Mid-Level Spreader and Case system from Miller for your studio or field video production. The system includes a CX8 fluid head, a fixed-length pan handle, a 75 Sprinter II carbon fiber tripod, a mid-level spreader, a set of rubber feet, and a soft carry case.

The CX8 fluid head features a 16-step counterbalance system, a 5-step pan/tilt drag, a side-load plate, and a maximum payload of 26.4 lb. The 75 Sprinter II carbon fiber tripod supports a maximum payload of up to 66.1 lb, features a 75mm bowl head and spiked feet, supports a mid-level spreader, and has a built-in carry handle. Read more below about the items in this kit.

Miller CX8 Fluid Head

The Miller CX8 Fluid Head is designed to accommodate a wide payload range with 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to support camera setups up to 26.4 pounds, adequate for small cinema cameras with rigs or medium sized ENG camcorders. Securing your camera or rig is easy. The sideload plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations. The plate offers 2.4" of sliding range to balance your rig.

To survive fast-paced shooting environments, the CX8 is die-cast from a lightweight, yet durable metal alloy with composite polymers and precision ball-bearings for smooth mechanical operation. Even in harsh conditions, the CX8 will perform reliably. The base of the CX8 is a 75mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CX8 in dark environments. A fixed length pan handle is included, and a second rosette is available for attaching an optional second pan handle.

Miller 75 Sprinter II 2-Stage Carbon Fiber Tripod (Mid-Level Spreader Ready)

The Miller 75 Sprinter II 2-Stage Carbon Fiber Tripod is a quick-setup solution for a tripod head with 75mm ball base. Its lightweight, dual-action flip locks and rigid carbon fiber construction allow for durability without compromising usability in ENG, EFP, and other pro video applications.

Unlike many traditional multistage designs, both flip locks are located on the same section for easy reaching, no matter the height setting. The feet have integrated steel spikes to add stability on rough or uneven terrain. The fast setup is complemented by an in-line carry handle for portability on set or in the field. Compatible mid-level spreaders, rubber feet, and dollies are available separately.

Two-stage carbon fiber tripod for heads with 75mm ball

Maximum payload up to 66.1 lb

Compatible with separately available mid-level spreader

Height extends from 23.6 to 60.4"

Built-in carry handle for portability

Miller Basic Mid-Level Spreader for 75 Sprinter II Tripods

Set up your tripod quickly and safely with this Basic Mid-Level Spreader from Miller. The spreader is compatible with 75 Sprinter II tripods and easily latches onto the tripod legs. The telescopic design extends from a 15.8 to a 25" diameter and allows users to set the tripod leg angle for rapid setup. The durable aluminum spreader helps to stabilize the entire camera system, and its arms are secured with locking latches.

Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)

The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.

Miller Pan Handle for Compass15 and Compass20 Fluid Heads

The Miller Pan Handle for Compass15 and Compass20 Fluid Heads is a 16mm fixed-length pan arm. The main tube is black-anodized aluminum alloy and features a comfortable rubber grip.

Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)

Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems. The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.

  • Payload Range: 0-12kg (0-26.4lbs)
  • Weight: 6.7kg (14.8lbs)
  • Height Range: 767-1697mm (30.2-66.8")
  • Transport Length: 867mm (34.1”)
  • Counterbalance Positions: 16 selectable positions (15+0)
  • Pan Tilt Drag: 5 selectable fluid drag positions + 0
  • Pan Tilt Locks: Positive lock caliper brake system
  • Tilt Range: +90° / -75°
  • Pan Range: 360°
  • Camera Platform: Quick release, side load camera plate
  • Sliding Range: 60mm (2.4")
  • Mounting Base: Ø75mm (2.9") ball levelling
  • Height Above Bowl: 167mm (6.6")
  • Illuminated Controls: Bubble level
  • Pan Handle: Fixed length 390mm (15.4")
  • Temperature Range: -40° to +65°C (-40° to +150°F)
  • Leg Extension: 2-stage
  • Lock Type: HS dual action
  • Leg Material: Carbon fibre

In the Box

  • 1x 75 Sprinter II 2-Stage Tripod – Carbon Fibre (1620)
  • 1x CX8 Fluid Head (1093)
  • 1x Basic Mid-Level Spreader (593)
  • 3x Rubber Feet (475)
  • 1x Pan handle – fixed with clamp (679)
  • 1x Arrowx Softcase (3502)
Be the first to review 3747 CX8 75 Sprinter II 2 Stage Carbon Fibre Tripod System with Mid-Level Spreader and Softcase. Write a review ›