Call: +44(0) 208 397 1407
Rated 4.75 / 5
Sell Your Gear Find Out More ›
Covid-19 Update Open as usual
Free Delivery On Orders Over £300 incl VAT

Libec RH45D Fluid Head

code: RH45D
  • £919.70
  • RRP: £990.00
Availability | Usually dispatched within 24 hours


  • 26.5 Max Payload
  • 75mm Half Bowl (Flat-Mount Compatible)
  • Continuous Adjustable Counterbalance
  • 2 Grades of Pan Drag

Libec RH45D (RH-45D, RH/45D, RH 45D) Fluid Head

Designed for ENG cameras weighing up to 26.5 lb, the RH45D Fluid Head from Libec features a unified ball/flat mount design. The base of the tripod can fit either in a standard 75mm bowl or on a flat mount with a 3/8"-16 screw. Having both options available means you can transfer the RH45D from a tripod with a bowl mount to a flat-mount slider.

To achieve proper balance, the head includes a sliding camera plate with 1.6" of fore/aft adjustment. The screw and locating pin are moveable to orient the plate on the camera to achieve the best possible balance. Once the camera is balanced, the continuous counterbalance and pan/tilt drag controls provide a smooth action with reduced backlash and unnecessary "bouncing."

Included with the head is a PH-6B pan handle. The handle is extendable for better reach or more precise movement. The bar can be placed on the right or left side of the head by screwing it onto one of the rosettes.

Continuous Counterbalance

  • This fluid head is equipped with an continuously adjustable counterbalance system that can be fine-tuned to provide the correct amount of counterforce that corresponds to the weight and angle of your camera. Different cameras can be used and correct counterbalance can be set for each camera configuration.

Fluid Drag System

  • The fluid drag mechanism reduces backlash that can occur at the beginning or end of panning/tilting moves.

Low Temperature Performance

  •  The RH45D is rated to be used in temperatures down to -40°F without seriously impacting the performance of the fluid drag system.

Camera Plate

  • Camera Plate Features: Sliding Balance Plate
  • Balance Plate Sliding Range: 3.2" / 80 mm

Tripod Platform

  • Base Mount: 75 mm Half Ball, 3/8"-16 Thread

Pan & Tilt

  • Drag Control: Tilt: Continuous, Tilt: 3-Step
  • Vertical Tilt: +90° to -70°


  • Load Capacity: 26.5 lb / 12 kg
  • Counter Balance: Continuous (10 to 23 lb / 4.5 to 10.5 kg)
  • Base Diameter: 2.95" / 75 mm
  • Operating Temperature: -40 to 140°F / -40 to 60°C
  • Weight: 5.5 lb / 2.5 kg

In the box

  • Libec RH45D Fluid Head
  • Libec PH-6B Extendable Pan Bar Handle for RH25D and RH45D Video Heads
Be the first to review Libec RH45D Fluid Head. Write a review ›