1049 Eng 2 MCF Tripod System FSB 10 Including FSB 10 T Fluid Head

Sachtler 1049 (10/49, 104 9, 104-9) Eng 2 MCF System FSB 10 Including FSB 10 T Fluid Head The Sachtler FSB 10 T Fluid Head is a versatile 100 mm solution for projects that need a light, strong and reliable gear addition. When you need speed as well as high performance, the convenient Touch & Go release plate makes attaching your camera securely as simple as clicking it into place. The camera platform’s sliding range of 60 mm and payload of up to 12 kg, supports the majority of today’s digital cinemas. The 100 mm levelling ball makes balancing the fluid head on your tripod fast, while its flat base means you can mount it on any flat surface. Once you are ready to shoot, Sachtler’s unique frictionless leak-proof fluid damping, with five horizontal and vertical grades of drag, means that you’ll never have uncontrolled jerks or vibrations ruining your tilts and pans. This high level of performance is guaranteed in any environment, including sub-zero shoots, meaning that Sachtler FSB 10 T Fluid Head won’t let you down when you need it. When you need to work quickly and effectively, you need a tripod that won’t slow you down. The best-selling Sachtler dual-extractible ENG 2CF carbon fibre tripod gives you optimal stability and reliable performance in every environment. Lightweight and twist-resistant, the one-piece carbon fibre design features a 100 mm bowl with tube diameter of 22 mm. The Sachtler quick clamping system makes locking the tripod in place securely as simple as three quick movements. This tripod’s dual extension provides improved reliability, boosting height range and carrying a payload of 40 kg. Weighing in at 2.4 kg with a transport length of 70 cm, the Sachtler ENG 2 CF provides a balance between lightweight and durability so that you never have to sacrifice performance for comfort and transportability.

80W/h Rechargeable Li-Ion V-Mount Battery

Sony BP-L80S (BPL80S, BP L80S, BP/L80S, bp-l80s) 80W/h Rechargeable Li-Ion V-Mount Battery The new BP-L80S joins the existing BP-L60S, BP-GL65 and BP-GL95 rechargeable Li-ion batteries in the Sony line-up. It uses the same technology as the BP-L60S but has a higher capacity of 83.5Wh.  The BP-L80S is ideal for use with the complete range of DVCAM, XDCAM, MPEG IMX, Digital Betacam and HDCAM camcorders, and can also be used with portable VTRs (such as the HDW-S280/1 and SRW-1) and battery powered picture monitors.  The BP-L and BP-GL series batteries share many operational characteristics. Both have been designed to be highly durable and reliable, making them suitable for the harshest environments encountered in the most demanding ENG and EFP applications.  There are, however, some differences in operational characteristics between the BP-L and BP-GL batteries, providing a choice of battery type depending upon the specific requirements of the user.   The BP-L80S is ideally suited to applications where the battery has to supply a high current (e.g. where the camcorder is being used with lights powered from the camcorder) and where cells are charged and then stored for a number of days before use.  The BP-GL95 is ideally suited to applications where a lower current is being supplied (e.g. where just the camcorder is being used), where the lightest possible battery is required and where there is a very quick turn around time between charging and use.  

A2030DCB C-Stand 30 With Detachable Base

Manfrotto A2030DCB (MAN-A2030DCB, MAN/A2030DCB, MAN_A2030DCB, MANA2030DCB, man_a2030dcb) C-Stand 30 With Detachable Base A turtle base chrome plated steel stand in black finish with 3 sections and 2 risers. The base is detachable for easy transport. This stand has a maximum payload of 10kg and maximum height of 3m. The stand is also available in chrome plated steel. Legs fold flat for easy storage.  

Air Fluid Head

Miller 1042 (10-42, 10/42, 10 42, 1-04-2) Air Fluid Head AIR Fluid head is purpose-built for new entrants into the field of videography and for professionals who want a lightweight travel companion for payloads up to 5kg (11lbs). For that fast action set-up the dual position counterbalance and 60mm camera-plate travel assist quick and easy balancing in both standard and heavier camera configurations. Whatever your application the AIR will always impress you and your clients. Constructed of lightweight high-strength die-cast alloy and rigid composite polymers, featuring precision ball bearing supported pan and tilt movements, AIR is extremely durable and robust delivering silky smooth pan-tilt fluid actions to match camera payloads up to 5kg (11Ibs). AIR fluid drag system is uniquely designed to employ smooth start and soft stop technology with no variation in performance over a wide range of temperatures and environments. AIR is a lightweight compact choice that will deliver good dependable results for many years. It meets the demands of professional storytellers and comes with the reliability and “THE RIGHT FEEL” that are the hallmarks of every Miller product.

APD Audio Power Distribution Box

Hawk-Woods APD (AP-D, AP/D, apd) Audio Power Distribution Box The Hawk-Woods APD Power Distribution Adaptor provides todays sound recordist with a massive amount of available power - and all from the industry standard NP battery range. Designed as a convenient alternative to a battery box, or similar heavy duty additional power source. The APD allows the operator to utilise the battery range most are already carrying by taking up to 6 NP batteries NP-50, NP-98. 12V regulated output is provided via four female XLRs and also by four Hirose sockets which are switched in pairs. The power potential with this piece of equipment is phenomenal; if six Hawk-Woods NP-98 batteries are inserted, there is 588 Watts of available power. With a side mounted handle, it can be either trolley-mounted or hand-held to suit individual requirements.

Battery Accessory Kit

Sony ACC-U60 (ACC_U60, Acc/U60, Acc U60) Battery Accessory KitConsists of BC-U2 charger, two BP-U60 batteries, and a 16 GB SxS-1™ memory card.

Battery Adapter - 4-Pin XLR to V-Mount

Sony BKP-L551 (BKPL551, BKP/L551, bkp-l551) Battery Adapter - 4-Pin XLR to V-MountThe Sony BKP-L551 V-Mount to 4-pin XLR DC male connector battery adapter for PDW-D1. This allows equipment with a 4-Pin XLR power input to utilize V-Mount batteries. Along with the PDW-D1 this adapter will work with other XDCAM equipment. Works with range of Sony camcorders and decks Used with F35/F23 CineAlta cameras, and HDW-S280 and PDW-HD1500 recorders. More battery options Power Supply Capability from BP-GL/IL/L/M Series battery via XLR-4-pin connector.  

Battery Charger for Olivine Batteries

Sony BC-L90 (BCL90, BC L90, BC/L90, bc-l90) Battery Charger for Olivine Batteries The BC-L90 is a 2-slot battery charger that provides extra fast charging times for the BP-FL75 Olivine battery. The innovative BP-FL75 battery uses Olivine – Lithium Iron Phosphate – instead of conventional Lithium Ion cathodes. The result is a substantial increase in charge-discharge cycles compared to previous Sony batteries. The BP-FL75 offers perfect integration with PMW-F55 and PMW-F5 cameras. It takes 70 minutes for the BP-FL75 to be fully charged to 75Wh capacity, providing more than 1-hour operation of the PMW-F55 and PMW-F5 working with the AXS-R5 recorder. Compatible with other Sony V-Mount batteries The BC-L90 also offers normal charging time for Sony V-Mount batteries, increasing the versatility of the charger.  

BP-820 Medium Capacity 1780mAh Battery Pack

Canon BP-820 (BP820 BP 820) Medium Capacity (1780mAh) Battery Pack for G/X Series Camcorders, G30, XA20 & XA25 The Canon BP-820 Lithium Battery For G30 / XA20 / XA25 is a small and lightweight battery pack designed to be charged and used without ever losing its ability to a charge. The battery has a voltage of 7.4V and a capacity of 1780mAh.

BP-828 High Capacity 2670mah Battery Pack

Canon BP-828 (BP828 BP 828) High Capacity (2670mAh) Battery Pack for G/X Series Camcorders, G30, XA20 & XA25 The Canon BP-828 High capacity Lithium Battery for G30 / XA20 / XA25 is a small and lightweight battery pack designed to be charged and used without ever losing its ability to a charge. The battery has a voltage of 7.4V and a capacity of 2670mAh.

Compact and lightweight AC adaptor / single channel battery charger

Sony AC-DN10 (ACDN10, AC DN10, AC/DN10, ac-dn10) Compact and lightweight AC adaptor / single channel battery charger The AC-DN10 is a compact and lightweight AC adaptor/charger. It has a maximum 100W DC power supply and features a V-mount mechanism for direct attachment to compatible camcorders. Battery Charging function Direct attachment to the V-shoe of a camcorder High Speed Charging: Around 2 times faster than AC-DN1/DN2B XLR-4-pin output to power other equipment Quick charging--- a BP-GL95 can be fully charged in approximately 145 minutes Can charge batteries while supplying AC power to other equipment  

CP33 Cheese Plate with IDX Plate

Shape SH-CP33IDX (SH_CP33IDX, SHCP33IDX, SH/CP33IDX, SH CP33IDX) CP33 Cheese Plate with IDX Plate The Shape CP33 Cheese Plate with IDX Plate is a 15mm rod-mount cheese plate with an IDX V-Mount battery plate screwed onto one side. The plate is 1/4" thick and features 33 threaded holes for accessories to be screwed into. These holes run end to end, from one side of the plate to the other. Four of the holes are 10/32" and the rest are 1/4" and 3/8". The IDX plate covers many of the holes from one side, but you can still screw into these holes from the other side as long as the screws are not much longer than the 1/4" thickness of the plate. The holes at the very corners of the plate are untouched by the IDX plate and can be used to attach accessories or devices like AJA's Ki Pro Mini. Screws are included for a Ki Pro Mini and for an Anton Bauer battery plate. The cheese plate is precision-machined as one piece.

curve-bk Steadicam Curve for GoPro HERO Action Cameras Black

GoPro curve-bk Steadicam Curve for GoPro HERO Action Cameras Black Fits HERO, HERO2, and HERO3 Fits HERO3+ and HERO4 Handheld Mechanical Stabilization Provides Isolation from Shake/Vibration - create smooth handheld video footage Helps Reduce "Rolling Shutter" Handle Folds for Transport  Extremely lightweight and small enough to carry in your pocket Requires LCD BacPac

D-8161A 190wh digital gold mount battery

D-8161A 190Wh Digital Gold Mount Bettery The Swit D-8161A is a lightweight 190Wh gold mount digital camera battery in SWIT DIBAS system. It has a 4-level LED indicator to give you a view of remaining power before mounting to camera, and a connecting shoe for wireless receiver S-7002. The D-8161A has a built-in intelligent circuit that has multiple protections of abnormal current, voltage and temperature.The D-4200 battery watch can also be connected, enabling it to read battery information such as exact remaining capacity, running time, real-time power, voltage, circuit and so on. Li-Ion 14.4v 190Wh 4 level power indicator

DATA-HC800 Water Resistant Hard Case - XXL

Datavideo (DATA-HC800, DATAHC800, DATAHC800) This Hard Case from Datavideo is a Heavy Duty case made from super strong polypropylene. It's water, dust and crush resistant to ensure you keep your gear protected.  Trunk style with retractable handle and wheels Highly crush resistant Rubber seals to protect valuable equipment from water & dust Handy pull-out handle and wheels for easy transporting Constructed from Polypropylene

DC-78 Battery Power Unit for ECM-88, ECM-44 and ECM-77 Microphones

Sony DC-78 (DC/78, DC_78, DC78, DC 78, dc-78) Battery Power Unit for ECM-88, ECM-44 and ECM-77 Microphones The DC-78 is a compact and in-line power supply for the Sony lavalier microphone range. It can be used to configure the popular ECM-44/77BC and ECM-88 for use as wired microphones. - Designed for use with Sony lavalier microphones equipped with a Sony 4-pin (SMC9-4P) connector - Two-way powering: battery operation (using an AA-size (LR6) alkaline battery) or external DC operation (12 to 48 V) - Supplied with an SMC9-4S input connector and an XLR 3-pin output connector Flexibility The DC-78 allows 'wireless ready' Sony ECM microphones (such as ECM-44BC, 77BC and 88) to be converted for use as wired microphones. The DC-78 is a compact in-line unit, with a 4-pin socket for the ECM microphone, a AA battery compartment and an XLR output connector. The DC-78 provides the flexibility of additional working methods, for example the microphone can be easily switched between a wireless and wired modes. Versatilite powering options The DC-78 allows Sony ECM microphones to powered for wired use, either by the internal AA battery or an external 48volt phantom powering.

Dual Slots SXS Pro+ and USB 3.0 Card Reader/Writer

Sony SBAC-UT100 (SBACUT100, SBAC UT100, SBAC/UT100, sbac-ut100) Dual Slots SXS Pro+ and USB 3.0 Card Reader/Writer High speed transfers from SxS PRO+ and SxS-1 cards with dual slots and daisy-chain operation The SBAC-UT100 SxS PRO+ and SxS-1 memory card reader/writer works on both Windows-based PCs and Macintosh computers. The unit provides 2x Thunderbolt 2 (TB2) interface for Mac and USB 3.0 interface for Mac and Windows for high-speed transfer of audio-visual material. The reader is also compatible with a USB 2.0 interface. Daisy-chain connection is possible to connect up to 6 units, providing up to 12 card slots. High speed transfers Read speeds of approx. 360 Mbps for two cards simultaneously from latest SxS Pro+ and SxS-1 cards using Thunderbolt 2. Daisy-chain operation Connect up to 6 units, providing up to 12 card slots, allowing simultaneous ingest up to 1800 Mbps total (300 Mbps each slot).  

Dual V-Mount Battery Fast Charger for BP-FLX75

Sony BC-L70A (BCL70A, BC/L70A, bc-l70a) (BP/FLX75, BP_FLX75) Dual V-Mount Battery Fast Charger for BP-FLX75 The BC-L70A can charge the BP-FLX75 Olivine lithium-ion battery in only 65 minutes. It is also capable of simultaneous, continuous charging of up to two lithium-ion* battery packs. The BC-L70A has the same light weight and compact dimensions as its predecessor, the BC-L70. Note: The BC-L70A cannot charge nickel metal hydride battery packs BP-M50 or BPM100. Efficient charging for two battery packs The BC-L70A features an advanced charging system that allows quick, efficient charging; up to two battery packs can be attached and charged simultaneously. Battery back-up Should the AC power cord be accidentally unplugged from the AC power source, a charged lithium-ion battery pack attached to the BC-L70A provides an alternate back-up power to the connected device.

DV-90R DV Fitting-DC-Jack (BP90) 2.1mm 12V

Hawk-Woods DV-90R (DV_90R, DV/90R, DV 90R) DV Fitting-DC-Jack (BP90) 2.1mm 12V The DV-90R is a step-up power adaptor offering a convenient portable source for todays broadcast recordists. It can be used in conjuction with our DV-F970 or the Sony NPF battery series. The 12W step-up in power is transfered from the battery via a BP90 flying lead, this is fully regulated to 12V

DV-MC4 4-Channel Simultaneous MDV Fast Charger

Hawk-Woods DV-MC4 (DV_MC4, DV/MC4, DV MC4) 4-Channel Simultaneous MDV Fast Charger The DV-MC4 is a four channel simultaneous fast charger. It has been designed for use with the DV-Link 970L and standard DV-970 batteries, plus all Sony NPF series of Li-Ion batteries. Its tough portable design allows for convenient storage, a priority when considering and new fast charger.

DV-SQN2S DV Fitting- Hirose 4-pin Male 2 Hirose Outputs 12V

Hawk-Woods DV-SQN2S (DV_SQN2S, DV/SQN2S, DV SQN2S) DV Fitting- Hirose 4-pin Male 2 Hirose Outputs 12V The DV-SQN2S can be used as a portable power source for most audio equipment. As well as two switched Hirose auxiliary connectors it features a Hirose flying lead. It is a 24W adapter with a 2A 12v regulator. Compatible with both Hawk-Woods own range and the Sony series of NPF batteries, the DV-SQN2S offers the perfect portable power solution.

DV-SQN4S DV Fitting-Hirose 4-pin Male 4 Hirose Outputs

Hawk-Woods DV-SQN4S (DV_SQN4S, DV/SQN4S, DV SQN4S) DV Fitting-Hirose 4-pin Male 4 Hirose Outputs  The DV-SQN4S has been designed to run directly from Hawk-Woods DV-F or Sony NPF series of batteries DV-F970 / DV-F980. The output is directly from the battery on the flying lead (60CM), set in series. So the flying lead will be up at 14v. You will need two batteries on this unit in order to take power out.  The 4x Hirose chassis mount connectors are all regulated to 12v outputs and are switched in pairs.

GA0006 Camera Storage Case - blue

SP Gadgets GA0006 (GA 0006, GA-0006, GA/0006) Camera Storage Case - blue Features: Organise your GoPro camera and accessories with the SP POV case This compact and easy to use case keeps your camera set protected at all times With perfectly shaped compartments for your GoPro camera, up to two BacPacs, sd card, housing doors and all your leads The sleek design and lightweight feel will make it easy to carry and keep your camera in tip top condition This case is an essential product for all GoPro users and compliments the GoPo range perfectly Compatable with all GoPro cameras

High Capacity Battery (5900mAh) for F-Series Cameras

Sony BP-FL75 (BP_FL75, BP/FL75, BP FL75, BPFL75) High Capacity Battery (5900mAh) for F-Series Cameras The innovative BP-FL75 battery uses Olivine – Lithium Iron Phosphate – instead of conventional Lithium Ion cathodes. The result is a substantial increase in charge-discharge cycles compared to previous Sony batteries. It also takes only 70 minutes to be fully charged with the BC-L90 fast battery charger. Perfect integration with PMW-F55 and PMW-F5 cameras. The BP-FL75 is same height as the PMW-F55 and PMW-F5 cameras, making the camera and battery package ergonomically streamlined for ease of use. Fully charged, the BP-FL75 provides more than 1-hour operation of the PMW-F55 and PMW-F5 working with the AXS-R5 recorder.  

Lithium-ion Battery (56Wh) with power out terminal

Sony BP-U60T (BPU60T, BP U60T, BP/U60T, bp-u60t) Lithium-ion Battery (56Wh) with power out terminal The BP-U60T (85 Wh) Lithium-ion battery supports professional video shooting in both the field and the studio. The battery has a 4 Pin 2A (Max) power output. The BP-U60T powers XDCAM handy camcorders such as the PMW-200, PMW-150 andPMW-100, as well as the PMW-50 portable deck. The battery provides power for more than two hours, depending on the camcorder. Intelligent INFO function displays battery status in camcorder The BP-U60T is equipped with a professional INFOfunction that shows the remaining capacity, chargingtime, and charge cycles on INFO-compatibleequipment such as Sony chargers and camcorders.

Lithium-ion battery pack 66 Wh capacity

Sony BP-GL65A (BPGL65A, BP GL65A, BP/GL65A, bp-gl65a) Lithium-ion battery pack 66 Wh capacity The Sony BP-GL65 is a Lithium Ion chemistry battery for professional camcorders and VTRs that accept V-mount batteries. This battery has a power capacity of 65 Watt Hours, enough to run a 40 watt draw over 1 ½ hours. With interactive features and lithium chemistry's light weight, these batteries offer advanced reliability and portability. Advanced Info Feature  The BP-GL series of batteries offer the most accurate power consumption and run-time information for PDW, MSW, and HDW series camcorders. Power remaining data is viewed right through the viewfinder in 10% increments. For other camera systems the LED display gives accurate power-remaining information in 20% increments Discharge Power Curve Unlike other battery chemistries, these Li-Ion batteries provide full power output with consistent voltage over the entire run-time. Low voltage battery power often triggers a warning signal once voltage falls below a certain level, usually 12 volts. The BP-GL batteries provide at least 14.4 volts almost up to the very end of their power supply.  

NP-F970 Battery and AC-VQ1051D Adaptor/Charger Kit

Sony ACC-L1BP (ACC_L1BP, ACC L1BP, ACCL1BP) (NP_F970 , NP/F970) (AC_VQ1051D, AC VQ1051D) NP-F970 Battery and AC-VQ1051D Adaptor/Charger Kit Sony NP-F970 (NPF970) high capacity L-series Li-Ion battery pack (6600mAH) This battery provides the longest running time of all L series batteries, with approximately 4-5 hours operation on an HVR-Z1E or up to 7 hours on a DSR-PD170P. Incorporates Sony InfoLithium technology which enables compatible camcorders to accurately report the charge remaining. VQ1051D AC Adaptor / Charger AC Adaptor / Charger for L series InfoLITHIUM™ batteries. Quick charging of up to two batteries. LCD displays battery charge status. This accessory kit offers real flexibility for professionals, giving longer battery life and faster re-charging than ever before. The AC-VQ1051D can provide AC power to your camcorder or quickly charge two InfoLITHIUM L series batteries in sequence. The NP-F970 high capacity, long-lasting battery powers your camcorder longer than any other battery in the L-series, and because its InfoLITHIUM you'll be able to see the remaining battery life displayed on your camcorders screen  

NP-F970 L-series Info-Lithium Battery 2 Pack (7.2v, 6300mAh)

Sony 2Np-F970/B (2Np/F970/B, 2Np_F970/B, 2NpF970/B) (NP_F970, NP/F970) NP-F970 L-series Info-Lithium Battery 2 Pack (7.2v, 6300mAh) Small and lightweight, Sony's Lithium-ion batteries can be charged or discharged anytime without developing memory effect. This means they never lose their ability to hold a full charge. They also display remaining battery time on the LCD as well as in the viewfinder by continuously communicating with the camcorder. InfoLithium battery packs have a built-in micro processor that accurately calculates remaining battery life in minutes.

NPB-SQN4S NP1 Power Adaptor

Hawk-Woods NPB-SQN4S (NPB_SQN4S, NPB/SQN4S, NPB SQN4S) NP1 Power Adaptor The NPB-SQN4S is fitted with an SQN(Hirose) connector and also fully loaded with four switched auxiliaries (Hirose Connectors). These outputs are fused and a low battery voltage indicator fitted.

NPC-SQN4S 4 Aux Switched Power Adaptor SQN

Hawk-Woods NPC-SQN4S (NPC_SQN4S, NPC/SQN4S, NPC SQN4S) 4 Aux Switched Power Adaptor SQN NPC Power Adaptors have all the benifits of the NPB range but are supplied in a different format. The orientation of the fitted adaptor, means that the switches more accessible when its used vertically in a sound bag. The NPC-SQN4S is fitted with a Hirose(SQN) connector and also features four switched auxiliaries (Hirose sockets). These outputs are fused and a low battery voltage indicator fitted.

NPC-XLR4S 4 Aux Switched Power Adaptor XLR4 (F)

Hawk-Woods NPC-XLR4S (NPC_XLR4S, NPC/XLR4S, NPC XLR4S) 4 Aux Switched Power Adaptor XLR4 (F) NPC Power Adaptors have all the benefits of the NPB range but are supplied in a different format. The orientation of the fitted adaptor, means that the switches more accessible when it's used vertically in a sound bag. The NPC-XLR4S is fitted with an XLR Female connector and also features four switched auxiliaries (Hirose sockets). These outputs are fused and a low battery voltage indicator fitted.

NPU-SQN4S NP1 Power Adaptor

Hawk-woods NPU-SQN4S (NPU/SQN4S, NPU SQN4S, NPUSQN4S, npu-sqn4s) NP1 Power Adaptor NPU adaptors have been designed to be used with the battery standing on its end with the adaptor on top. This gives easy access to the two featured switches and LED indicator. The NPU has fully regulated outputs, a voltage selector switch allows the user to select between either 9.6 or 12 volts, depending on specific equipment being powered.  The NPU-SQN4S has four switched Hirose sockets and a Hirose(SQN) flying lead.

ODBK-102 Power Supply Unit

Sony ODBK-102 (ODBK102, ODBK/102, odbk-102) Power Supply Unit The ODBK-102 power supply unit works with the ODS-L60E PetaSite scalable library and the ODS-D77F fibre channel drive unit. The Optical Disc family of data storage products is designed to provide an extended life cycle for storing and archiving all forms of audio-visual assets and data files for the very long term.Ideal for deep archive and near-online archiveThe Sony Optical Disc Archive system is ideal for deep archive for very long term archiving, such as broadcaster archives where data tape does not provide the assurance or meet the need for write-once, very long-term archive requirements. It provides second copy archive at a remote site and is ideal for business continuity/disaster recovery, post house and production back-up and for video, film and stock footage archives or national archives. The system can also be used for news and sports clips that need to be near-online and as an on-line browse and proxy clip store.

Olivine-Type Lithium Ion V-Mount Battery Pack (75Wh)

Sony BP-FLX75 (BPFLX75, BP FLX75, BP/FLX75, bp-flx75) Olivine-Type Lithium Ion V-Mount Battery Pack (75Wh) The innovative BP-FLX75 battery uses Olivine – Lithium Iron Phosphate – instead of conventional Lithium Ion cathodes. The result is a substantial increase in charge-discharge cycles compared to previous Sony batteries – effectively doubling the battery’s lifespan. It also takes only 65 minutes to be fully charged with the BC-L90 and BC-L70A fast battery charger while still being compatible with older Sony chargers.  

PAN-AGVBR118G 11800mAh 7.28V Battery for AG-DVX200 & AJ-PX270

Panasonic PAN-AGVBR118G ( AGVBR118G, PANAGVBR118G, PAN/AGVBR118G, PAN AGVBR118G) 11800mAh 7.28V Battery for AG-DVX200 & AJ-PX270 The Panasonic AG-VBR118G 11800mAh 7.28V Battery joins Panasonic's new range of AG-series of high-performance batteries, boasting a larger capacity (11800mAh) and longer operating times. This battery is compatible with the Panasonic AJ-PX270, PX230, and AG-DVX200 camcorders.

PAN-AGVBR59E 5900mAh 7.28V Battery for AG-DVX200 AJ-PX270

Panasonic PAN-AGVBR59E ( AGVBR59E, PAN/AGVBR59E, PANAGVBR59E, PAN AGVBR59E) 5900mAh 7.28V Battery for AG-DVX200 AJ-PX270 The Panasonic AG-VBR59E 5900mAh 7.28V Battery for AG-DVX200 & AJ-PX270. Capacity: 5900mAh 7.28V Dimensions: 41,3 x 51,3 x 69,6mm Weight: Approx. 230g

PAN-AGVBR89G 8850mAh 7.28V Battery for AG-DVX200 & AJ-PX270

Panasonic PAN-AGVBR89G ( AGVBR89G, PAN/AGVBR89G, PANAGVBR89G, PAN AGVBR89G) 8850mAh 7.28V Battery for AG-DVX200 & AJ-PX270 The Panasonic AG-VBR89G 8850mAh 7.28V Battery for Panasonic AG-DVX200, AJ-PX270, AJ-PX230, AJ-PG50, AG-AC90A, AG-AC8, HC-X1000, and HC-MDH2 camcorders offers twice the recording time, and half the charging time. This battery joins Panasonic’s new AG-series of high-performance batteries, boasting a larger capacity (8850mAh) and longer operating times.

Pdv-64N large cassette blank tape without memory

64 minute DVCAM (large cassette) blank tape without memory   DESCRIPTION:-   The Sony PDV-64N 64 Minute DVCAM Videocassette is a compact professional digital video tape format for broadcast and professional users. It is made to record and playback massive amounts of video and audio data with higher carrier-to-noise (C/N) ratios, less dropouts and more durability. DVCAM videocassette made for broadcast and professional users.Metal evaporation process for improved packing density and increased C/N ratio.DLC Protective Layer for extra durability.

Power Supply & Fast Dual Charger Kit

Sony ACC-V1BPA (ACC V1BPA,  ACCV1BPA,  ACC/V1BPA, acc-v1bpa) Power Supply & Fast Dual Charger Kit Make sure your camcorder is always ready to shoot with the ACC-V1BPA dual charger/AC adaptor and InfoLITHIUM® rechargeable battery kit. Sony's ACC-V1BPA accessory kit includes the AC-VQV10 dual charger / AC adaptor and an NP-FV100 high capacity InfoLITHIUM® battery. This accessory kit offers real flexibility for professionals, giving longer battery life and faster re-charging than ever before. The AC-VQV10 can provide AC power to your camcorder or quickly charge two InfoLITHIUM batteries in sequence. It is fully compatible with InfoLITHIUM V, H & P series batteries. The NP-FV100 high capacity, long-lasting battery powers your camcorder longer than any other battery in the V-series, and has a 15% capacity increase over the NP-FH100. And because it's InfoLITHIUM you'll be able to see the remaining battery life displayed on your camcorder's screen.

Power Supply Extension Unit

Sony HXCE-FB70//U (HXCEFB70//U, HXCE/FB70//U, hxce-fb70//u) Power Supply Extension Unit Extends fibre connection from 250m to 10km The HXCE-FB70 is an extension module for the fibre connection between the CA-FB70 optical fibre adaptor and HXCU-FB70 optical fibre CCU. It receives power via a fibre from the HXCU-FB70. It then connects to the CA-FB70 with a single mode fibre cable. In this case, it can extend the extension distance from 250m to 250m + 10km if the CA-FB70 is powered locally. The HXCE-FB70 is designed to work with the HXC-D70 and PMW-320/350/500 camcorders. Full HD picture quality and connection for all signals The HXCE-FB70 provides the excellent picture images as well as flexible integration and the possibility to extend the operation with all signals (Tally, Intercom, Video Return and Prompter) in full HD.  

Power Supply Unit

Sony ODBK-101 (ODBK101, ODBK/101, odbk-101) Power Supply Unit The ODBK-101 power supply unit works with the ODS-L30M PetaSite scalable library and the ODS-D77F fibre channel drive unit. The Optical Disc family of data storage products is designed to provide an extended life cycle for storing and archiving all forms of audio-visual assets and data files for the very long term.Ideal for deep archive and near-online archive The Sony Optical Disc Archive system is ideal for deep archive for very long term archiving, such as broadcaster archives where data tape does not provide the assurance or meet the need for write-once, very long-term archive requirements. It provides second copy archive at a remote site and is ideal for business continuity/disaster recovery, post house and production back-up and for video, film and stock footage archives or national archives. The system can also be used for news and sports clips that need to be near-online and as an on-line browse and proxy clip store.

PROPHET 4 In 1 Gimbal With Detachable Head

Came-TV CAME-PROPHET (CAMEPROPHET, CAME PROPHET, CAME/PROPHET) 4 In 1 Gimbal With Detachable Head. The CAME-Prophet is the successor to our very successful CAME-Argo gimbal. Both the Prophet and Argo are designed to support small to medium sized DSLRs with a maximum payload of 6.6 lbs (3 kg). However, while the Argo contains a dedicated 2-handed setup, the Prophet comes with a single handed pistol grip handle (similar to the CAME-Optimus), but with the option to use them with a variety of compatible two-handed accessories - including the Orbit-One Ring Mount, Dual Handles and Tessera The updated frame design also allows for the Prophet Gimbal to be operated completely inverted or underslung. The pan motor can be configured on either side of the camera to provide efficient cable routing and access to either side of the camera. All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation. The Prophet model also features encoders helps extend battery running time and allows quick and easy calibration. The battery life can run up to 10 hours on a single charge. The single handle has a built in Joystick. The CAME-Prophet has a quick release camera plate along with tool-less adjustments for easy and fast camera balancing.

Quad Li-Ion Battery Charger, DC Out 6A

Sony BC-L160 (BCL160, BC L160, BC/L160, bc-l160) Quad Li-Ion Battery Charger, DC Out 6A Sony is pleased to introduce the new BC-L160 Lithium Ion Battery Charger. This new portable four (4) position charger is the successor model to the BC-M150, and offers simultaneous four battery charging. The BC-L160 offers several enhancements from the previous model such as high/low (H/L) charge voltage selection, selectable fast/slow, silent (F/S) charge model selection, as well as the ability to selectively skip the trickle charge sequence to prolong battery life. The BC-L160 is also equipped with an LCD display for easy checking of the current charging status, with indicators for Charging Capacity, Charging Cycle Time, Estimated Charging Time, Charge Mode, and Skip Function (trickle charge). A Battery Diagnostic feature is also added with the new BC-L160 (CH1 slot only). Please note: The new BC-L160 is for use with Sony professional V-Mount type lithium-ion batteries only.

Rechargeable Lithium-ion Battery - V-Mount 95Wh

Sony BP-GL95A (BPGL95A, BP/GL95A, bp-gl95a) Rechargeable Lithium-ion Battery - V-Mount 95WhThe BP-GL Series Lithium-ion Battery Packs come with a durable V-mount mechanism, which provides high compatibility with a variety of Sony professional camcorders, some portable VTRs, and video monitors.Compact and powerful High power in a compact and lightweight body.

Redundant Power Supply Unit for XDCAM

Sony XDBK-101 (XDBK101, XDBK/101, xdbk-101) Redundant Power Supply Unit for XDCAM The XDBK-101 is the redundant power supply option for the XDS-1000, XDS-PD1000, and XDS-PD2000 Professional Media Station units.

RP-BP970 Li-Ion Battery Pack

Redpro RP-BP970 ( RP/BP970 , RP BP970 , RPBP970) Li-Ion Battery Pack   Small and lightweight, REDPRO RP-BP970 Info-Lithium Battery Pack (6600mAh) Provides the Advantages of Lithium-Ion, meaning it can be charged or discharged at anytime without developing memory effect. This means the battery never loses its ability to hold a full charge. The Redpro RP-BP970 Lithium-Ion Battery (7.4V, 6600mAh) is a replacement for the Canon BP-970. This battery will charge Canon GL1, GL2, XL H1; Canon Xf100, Xf105, Xf300 and Xf305 proffesional camcorders *This battery will also charge Canon EOS C100, EOS C300 and EOS C500, but the battery cover will not close When it comes to Recording Time, the RP-BP970 Battery can provide up to 18 hours of Continuous Recording Time. Super Long Battery Life 4.2 x more Power than standard Battery Lithium-ion cells with no 'Memory Effect'. Highly Efficient, Compact and light-weight Environmentally-friendly: 100% free of lead, Cadmium and Mercury           What's in the box:     1 x RP-BPF970 Battery Pack Such is the reliability of RedPro products, All RedPro products come with a 2 year manufacturer's warranty

RP-CAHDBT-001 Battery Charger Plate for GoPro AHDBT-001

HedBox RP-CAHDBT-001 (RP-CAHDBT/001, RP/CAHDBT/001, RP_CAHDBT_001, rp-cahdbt-100) Battery Charger Plate for GoPro AHDBT-001 Plate for Gopro This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs:  Gopro - AHDBT-001

RP-CAHDBT-201 Battery Charger Plate for GoPro HERO 3 and HERO3+

HedBox RP-CAHDBT-201 (RP-CAHDBT/201, RP/CAHDBT/201, RP CAHDBT 201, rp-cahdbt-201) Battery Charger Plate for GoPro HERO 3 and HERO3+ Plate for Gopro This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs:  Gopro - AHDBT-002, AHDBT-301, AHDBT-302

RP-CAHDBT-401 RP-DC20/DC10 Battery Charger Plate

HedBox RP-CAHDBT-401 (RP/CAHDBT/401, RP CAHDBT 401, RP-CAHDBT/401, rp-cahdbt-401) RP-DC20/DC10 Battery Charger Plate GoPro: AHDBT-401

RP-CBCF10E Battery Charger Plate for Panasonic BC-F10E, BC-G10

HedBox RP-CBCF10E (RP/CBCF10E, RP CBCF10E, RP_CBCF10E, rp-cbcf10e) Battery Charger Plate for Panasonic BC-F10E, BC-G10. Plate for Panasonic This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. With this plate you can charge next Battery Packs:  Panasonic- BC-F10E ; BC-G10

RP-CBLC12 Battery Charger Plate for Panasonic BL-C12, BLC12PP, BLC12E

HedBox RP-CBLC12 (RP/CBLC12 , RP CBLC12 , RP_CBLC12, rp-cblc12) Battery Charger Plate for Panasonic BL-C12, BLC12PP, BLC12E Plate for Panasonic This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs:  Panasonic - BL-C12

RP-CBLF19 Battery Charger Plate for Panasonic

HedBox RP-CBLF19 (RP/CBLF19, RP CBLF19, RP_CBLF19, pr-cblf19) Battery Charger Plate for Panasonic Plate Foe Panasonic This Battery Plate is designed to use with HedBox Digital Dual Charger. Use to fit Battery Pack on HedBox Battery Charger model RP-DC20 & RP-DC10 -Panasonic | DMW-BLF19 ; DMW-BLF19E ; DMW-BLF19PP This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs: Panasonic - DMW-BLF19

RP-CBP808 Battery Charger Plate for Canon BP-808

HedBox RP-CBP808 (RP/CBP808, RP CBP808, RP_CBP808, rp-cbp808) Battery Charger Plate for Canon BP-808 Plate for Canon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  CANON - BP-808 ; BP-809 ; BP-819 ; BP-827

RP-CBX1 Battery Charger Plate for Sony NP-BX1

HedBox RP-CBX1 (RP/CBX1 , RP CBX1 , CBX1) Battery Charger Plate for Sony NP-BX1. Battery plate for Sony This Battery Plate is designed to use with HedBox Digital Dual Charger.  This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20.   According to the model plate Digital Dual Charger. Automatically set Charging Voltage and the Charging Current for the designed Battery Pack.  With this plate you can charge next Battery Packs: Sony - NP-BX1

RP-CD16 Battery Charger Plate for Panasonic CGR-D08

HedBox RP-CD16 (RP/CD16, RP CD16, RP_CD16, pr-cd16) Battery Charger Plate for Panasonic CGR-D08 This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs: PANASONIC - CGR-D08 ; CGR-D16 ; CGR-D28 ; CGR-D120 ; CGR-D210 ; CGR-D220 ; CGR-D320 ; CGR-D54S ; VW-VBD25 ; CGR-S602

RP-CEL12 Battery Charger Plate for Nikon EN-EL12

HedBox RP-CEL12 (RP/CEL12, RP CEL12, RPCEL12, RP_CEL12, rp-cel12) Battery Charger Plate for Nikon EN-EL12 Plate for Nikon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs: Nikon- EN-EL12

RP-CEL15 Battery Charger Plate for Nikon EN-EL15

HedBox RP-CEL15 (RP/CEL15, RP CEL15, RPCEL15, RP_CEL15, rp-cel15) Battery Charger Plate for Nikon EN-EL15 Plate for Nikon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs:  Nikon - EN-EL15

RP-CEL20 Battery Charger Plate for Nikon EN-EL20

HedBox RP-CEL20 (RP/CEL20, RP CEL20, RP CEL20, RP_CEL20, rp-cel20) Battery Charger Plate for Nikon EN-EL20 Plate for Nikon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  Nikon - EN-EL20

RP-CEL3 Battery Charger Plate for Nikon EN-EL3

HedBox RP-CEL3 ( RP/CEL3, RP CEL3, RP_CEL, RPCEL3, rp-cel3) Battery Charger Plate for Nikon EN-EL3 Plate for Nikon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  Nikon - EN-EL3 ; EN-EL3E ; NP150

RP-CF915 Battery Charger Plate for Canon F-915

HedBox RP-CF915 (RP/CF915, RP CF915, RP_CF915, rp-cf915) Battery Charger Plate for Canon F-915 Plate for Canon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  CANON - F-915 ; F-930 ; F-945 ; BP-911 ; BP-915 ; BP-930 ; BP-930G ; BP-950G ; BP-970G ; BP-975

RP-CLP-E10 Battery Charger Plate for Canon LP-E10

HedBox RP-CLP-E10 (RP/CLP/E10, RP-CLP/E10, RP CLP E10, rp-clp-e10) Battery Charger Plate for Canon LP-E10 Plate for Canon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs:  CANON - LP-E10

RP-CLP-E6 Battery Charger Plate for Canon LP-E6

HedBox RP-CLP-E6 (RP-CLP/E6, RP/CLP/E6, RP CLP E6, rp-clp-e6) Battery Charger Plate for Canon LP-E6 Plate for Canon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  Canon - LP-E6  HedBox RP-LPE6 battery

RP-CLP-E8 Battery Charger Plate for Canon LP-E8

HedBox RP-CLP-E8 (RP/CLP/E8, RP-CLP/E8, RP CLP E8, rp-clp-e8) Battery Charger Plate for Canon LP-E8 Plate for Canon This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  Canon - LP-E8

RP-CNP-W126 Battery Charger Plate

HedBox RP-CNP-W126 (RP/CNP/W126, RP CNP W126, RP-CNP/W126, rp-cnp-w126) Battery Charger Plate This Battery Plate is designed to use only with HedBox Digital Dual Battery Charger models RP-DC20 and RP-DC10. This Economic Option allows you to Charge many different Batteries types, all with one Charger. Acording to the model plate Digital Dual Charger Automatically set Charging Voltage and the Charging Current for the designed Battery Pack. This leave no space for charging error! This plate can be used on Battery Pack Model: - Fujifilm: NP-W126

RP-CVBG130 Battery Charger Plate for Panasonic VW-VBG130

HedBox RP-CVBG130 (RP-CVB-G130, RP-CVB/G130, RPCVB-G130, RPCVBG130) Battery Charger Plate for Panasonic VW-VBG130. Plate for Panasonic This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error! With this plate you can charge next Battery Packs: PANASONIC - VW-VBG130 ; VW-VBG130-K

RP-CVBG6 Battery Charger Plate for Panasonic VW-VBG6

HedBox RP-CVBG6 (RP/CVBG6 , RP CVBG6 , RP_CVBG6, rp-cvbg6) Battery Charger Plate for Panasonic VW-VBG6 Plate for Panasonic This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:  PANASONIC - VW-VBG6

RP-CVF808 Battery Charger Plate

HedBox RP-CVF808 (RP/CVF808, RP CVF808, RP_CVF808, rp-cvf808) Battery Charger Plate This Battery Plate is designed to use with HedBox Digital Dual Charger. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20. According to the model plate Digital Dual Charger Automaticaly set Charging Voltage and the Charging Current for the designed Battery Pack. That leave no space for charging error!  With this plate you can charge next Battery Packs:   JVC - BN-VF808 ; BN-VF815 ; BN-VF823

S-8428 jvc bn-v series dv battery

Swit S-8428 (S8428, S 8428, S/8428, s8428) JVC BN-V Series DV Battery, 7.2V - 22.3Wh S-8428 is a 7.2V, 21Wh Li-ion DV battery compatible with JVC BNV series battery V428U. The build-in intelligent circuit has multiple protections of abnormal current, voltage and temperature. Features: 7.2V 21Wh capacity JVC BNV series battery compatible

S-8D28 li-ion dv battery

Swit S-8D28 Panasonic Style Battery   The Swit S-8D28 is a 7.2V 22.3Wh DV battery which is comparable to the Panasonic CGP-D28.   Key Features:   ·                     Li-Ion 7.2v 22.3Wh   ·                     Panasonic CGA series battery compatible   ·                     For use with DVC30, DVX100   ·                     Dimensions: 60x36x55mm

S-8M71 sony qm style dv battery

Swit S-8M71 (S8M71, S 8M71, S/8M71, s8M71, s 8M71) Sony QM Style DV Battery, 7.2V - 22.3Wh S-8M71 is a 7.2V, 21Wh Li-ion DV battery compatible with SONY DV battery NP-QM71/71D/91/91D. The build-in intelligent circuit has multiple protections of abnormal current, voltage and temperature. Features: 7.2V 21Wh capacity SONY NP-QM series battery compatible

SDSDXPA-512G-G46 512GB Extreme Pro SDXC 95MB/s Card

Sandisk SDSDXPA-512G-G46 (SDSDXPA512GG46, SDSDXPA 512G G46, SDSDXPA/512G/G46, sdsdxpa-512g-g46) 512GB Extreme Pro SDXC 95mb/s Card SanDisk Extreme Pro 512GB SDXC UHS-I 95MB/s U3 V30 4K Memory Card High-speed SD card for DSLR, mirrorless & 4K video recording The SanDisk Extreme Pro 512GB SDXC UHS-I memory card is designed for professional photographers and videographers who need reliable, high-capacity storage for demanding shoots. With fast read speeds and U3/V30 ratings, it’s ideal for capturing 4K UHD video and high-speed burst photography. Perfect for: DSLR & mirrorless cameras 4K UHD video recording Professional photography (burst shooting) Camcorders & broadcast use Content creators & videographers ⚙️ Key Features: 512GB storage capacity – ideal for long shoots and large files Up to 95MB/s read speed – fast data transfer UHS-I, U3 & V30 rated – supports 4K UHD video recording Reliable performance for professional use Durable design – built to withstand tough shooting environments  

SDSDXPK-064G-GN4IN Extreme Pro SDXC 64GB - 300/MB/s UHS-II

Sandisk SDSDXPK-064G-GN4IN (SDSDXPK064G-GN4IN, SDSDXPK/064G-GN4IN, sdsdxpk-064g-gn4in) Extreme Pro SDXC 64GB - 300/MB/s UHS-II For super-fast continuous burst mode shots, maximum post-production workflow efficiency, and high-performance video recording, get SanDisk Extreme PRO SDHC and SDXC UHS-II cards.  The high-performance SDHC and SDXC memory cards boast shot speeds up to 260MB/s6 (1733X) and transfer speeds up to 300MB/s6 (2000X). UHS Speed Class 3 (U3) supports 32GB to 128GB of Full HD and cinema-quality 4K video recording.  Optimised for cameras that support the new UHS-II standard, SanDisk Extreme PRO SDHC and SDXC UHS-II cards deliver the uncompromising results that professional photographers demand. Key Features Designed for professionals Professional cameras and high-resolution camcorders deserve the power, performance, capacity, and reliability of SanDisk's latest innovations. This is why professional photographers and videographers trust SanDisk® memory cards. Speeds of up to 300MB/s read and 260MB/s write For maximum efficiency, SanDisk Extreme PRO SDHC and SDXC UHS-II Cards deliver extremely fast transfer speeds of up to 300MB/s for post-production workflow. Write speeds of up to 260MB/s handle rapid shots, sequential burst mode, and RAW plus JPEG capture with ease. Cinema-quality 4K video capture With UHS Speed Class 3 (U3) rating, SanDisk Extreme PRO SDHC and SDXC UHS-II cards let you capture uninterrupted cinema-quality 4K and Full HD video. This makes them ideal for professionals recording extreme sports and other fast-action activities without dropping frames. Designed to withstand extreme environments SanDisk Extreme PRO SDHC and SDXC UHS-II Cards are shockproof, temperature-proof, waterproof and X-ray-proof, so you can enjoy your adventures without worrying about the durability of your memory card. Easy file recovery with RescuePRO® deluxe software The card comes with a RescuePRO Deluxe data recovery software download offer. This software makes it easy to recover files that have been accidentally deleted (download required). Choose the amount of storage you need The amount of capacity you need depends on the types of files you have, how big they are, and how many there are.

SL-1 1-Channel NP1 Charger

Hawk-Woods SL-1 (SL_1, SL/1, SL 1) 1-Channel NP1 Charger The Hawk-Woods SL-1 is suitable for charging one Lithium-ion NP1 battery at a time. This is a low cost unit offering a compact solution as both a camera operators primary charger, or for those requiring a spare unit just for backup.

SPRY 4 In 1 Gimbal With Detachable Head

Came-Tv CAME-SPRY (CAME SPRY, CAMESPRY, CAME/SPRY) 4 In 1 Gimbal With Detachable Head. In an effort for 100% customer satisfaction we would like you to know all the basic steps and information before purchasing our gimbals to insure that you know what goes into owning one. The CAME-TV SPRY is our innovative 4-in-1 gimbal that comes with three different heads that can be quickly interchanged to hold a smart phone, GoPro, and point-and-shoot cameras up to 1.1 lbs . When using most Sony cameras (ex: Sony RX100), there are 4 buttons located on the handle that will allow you to control the camera directly such as zooming in out, picture focus, and image capture/video record. The included Bluetooth remote will control an iPhone when coupled with the "BT Shutter" application. The pan motor can be configured on either side of the camera to provide efficient cable routing and access to either side of the cameras and phone. All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation. The SPRY Battery Foot is an optional part that includes a larger battery for longer run time and has threaded mounting incorporated in the base to allow mounting. Some creative mounting options could be a skateboard or underslung on a car, the threaded mount allow for mounting to a fixed object.

SSL-JVC75 7.4V Battery System

IDX SSL-JVC75 (SSL_JVC75, SSL/JVC75, SSL JVC75) 7.4V Battery System This high-capacity IDX Battery from JVC is designed for the JVC GY-HM600U, GY-HM650U, and GY-HMQ10U cameras and JVC DT-X series monitors. It features a 7.4V output and 55Wh capacity and offers a proprietary IDX 7.2V X-Tap output for powering various accessories simultaneously with the camera/monitor. The optional C-XTAP2 X-Tap open leads cable is required for using the X-Tap connector.

Steadicam Smoothee Handheld Video Stabilizer for iPhone 5

Steadicam Smoothee Handheld Video Stabilizer for iPhone 5 The Steadicam Smoothee for Apple iPhone 5 is a lightweight handheld video stabilizer designed to produce smoother and more professional-looking smartphone footage. Developed by Steadicam, one of the most recognised names in camera stabilisation technology, the Smoothee helps reduce unwanted shake and movement during handheld filming, making it ideal for mobile filmmaking, content creation, vlogging and video production. Designed specifically for the Apple iPhone 5 and iPhone 5S, the stabilizer features a dynamically balanced design and ergonomic handheld operation for improved shooting stability and fluid camera movement.   The Smoothee is widely used for mobile filmmaking, creative video production, walking shots and handheld tracking footage. Suitable For   Smartphone filmmaking Vlogging Video content creation Handheld tracking shots Walking footage Creative mobile video production

SxS Card Slot Option Board for PDW-HR1

Sony PDBK-MK1 (PDBKMK1, PDBK/MK1, pdbk-mk1) SxS Card Slot Option Board for PDW-HR1 The Sony SxS Card Slot Option Board for PDW-HR1 is an SxS Memory Card Adaptor that can be used as an option for adding 2 SxS card slots to the PDW-HR1 Professional Disc Field Station. You can use play content on SxS memory cards and copy content between professional discs and SxS memory cards via the optional board. You can directly browse files on SxS cards via the PDW-HR1 and also perform various clip transcoding and copy functions. You can copy data to and from the \UserData folder of the PDW-HR1 and thus maintain the original XDCAM EX card BPAV folder structure whenever required. Rewrapping or transcoding of XDCAM EX MP4 files to optical XDCAM MXF files during copy process is also possible using the SxS Card Slot Option Board for PDW-HR1. Consolidation of all footage on a disc using the MXF file format is also possible which is useful for XDCAM EX and optical XDCAM photographers. You can easily transcode and upconvert SD clips to HD as well as cross convert 720p material to 1080i material using the SxS Card Slot Option Board for PDW-HR1. SxS Memory Card Adaptor that can be used as an option for adding 2 SxS card slots to the PDW-HR1 Professional Disc Field Station Allow you to play content on SxS memory cards and copy content between professional discs and SxS memory cards via the optional board Allows you to directly browse files on SxS cards via the PDW-HR1 and also perform various clip transcoding and copy functions Allows copying data to and from the \UserData folder of the PDW-HR1 and thus maintaining the original XDCAM EX card BPAV folder structure whenever required Enables rewrapping or transcoding of XDCAM EX MP4 files to optical XDCAM MXF files during copy process Consolidates all footage on a disc using the MXF file format Transcodes and upconverts SD clips to HD as well as cross converts 720p material to 1080i material

V-Lok Battery Belt for Arricam 3P XLR (28.8V)

Hawk-Woods VL-B2 (VL_B2, VL/B2, VL B2) V-Lok Battery Belt for Arricam 3P XLR (28.8V) The VL-B2 is a high quality leather battery belt manufactured in the UK by Hawk-Woods. Two V-Lok battery plates allows the user to attach two V-Lok or V-Mount batteries and utilise it as a waist mounts power source. The battery fittings are wired in series giving a combined voltage of 28.8v via a XLR 3 pin socket ideal for powering high voltage film cameras.

V-Mount Dual Battery Adapter

Sony BKW-R4 (BKWR4, BKW/R4, bkw-r4) V-Mount Dual Battery AdapterThe Sony BKW-R4 V-Mount Dual Battery Adapter for SRMASTER Portable Recorder enables DC operation of the Sony F65 Digital Motion Picture camera and the SR-R4 SRMASTER portable recorder. LEMO 8-pin DC output connector 1 or 2 BP-GL95A batteries can be mounted Approximately 1.8 hours operating time for F65RS with 2 BP-GL95A batteries

V-Mount Dual Battery Adaptor for HDCAM or XDCAM Camcorder

Sony BKW-L200 (BKWL200, BKW/L200, bkw-l200) V-Mount Dual Battery Adaptor for HDCAM or XDCAM Camcorder Battery adapter for enabling the battery is connected to the HDCAM or XDCAM camcorder. The adaptor extends the operating time of HDCAM/XDCAM camcorders by allowing up to two BP-GL95A high capacity batteries to be mounted. The V-mount mechanism allows for direct attachment to an HDCAM or XDCAM camcorder. Battery adaptor works with BP-GL95A high capacity Li-Ion V-mount battery packs.

VL-4X4 4-Channel Simultaneous V-Lok Charger

Hawk-Woods VL-4X4 (VL_4X4, VL/4X4, VL 4X4) 4-Channel Simultaneous V-Lok Charger The VL-4X4 is a 4-Channel simultaneous charger for our V-Lok Lithium-Ion Battery range. This 4Ah charger will charge up to four of these Hawk-Woods batteries at the same time.

VL-B5 V-Lok Battery Belt - Dual Parallel XLR 4-pin

Hawk-Woods VL-B5 (VLB5, VL B5, VL/B5, vl-b5) V-Lok Battery Belt - Dual Parallel XLR 4-pin  The VL-B5 is a high quality leather battery belt manufactured in the UK by Hawk-Woods. V-Lok battery plates allow the user to attach V-Lok or V-Mount type batteries and utilize it as a waist mounts power source.  Very handy for powering your equipment on locations, ideal for maneuverability. Battery belts are highly convenient taking the weight off the camera, making light work of the task in hand.   This battery belt comes readily available with 2x camera fittings which will allow the use of two V-LOK batteries, These batteries will run in parallel so you will have combined wattage at nominal battery voltage. Power out can be taken from the XLR4 chassis mount on the camera fitting.   Should you require Anton-Bauer fittings please call our sales team to discuss this option. Features XLR4 chassis mount High Quality Leather   V-LOK compatible  

VL-BP1 BPU Fitting V-Lok Converter/Adapter

Hawk-Woods VL-BP1 (VLBP1, VL BP1, VL/BP1, vl-bp1) BPU Fitting V-Lok Converter/Adapter This handy compact adaptor allows you to attach Hawk-Woods BP-30U, BP-60U, BP-75U or Sony BPU-type batteries to a V-Lok/V-Mount fitting. This allows the user to power V-Mount cameras from BPU power plus charge BPU batteries on V-Lok/V-Mount chargers.  

VL-CFA2 V-Lok Arri Amira Fitting - 3x Power-con -1x Lemo 2-pin

Hawk-Woods VL-CFA2 (VLCFA2, VL CFA2, VL/CFA2, vl-cfa2) V-Lok Arri Amira Fitting - 3x Power-con -1x Lemo 2-pin Hawkwoods VL-CFA2 has been designed to allow Arri Amira users to power the Amira from 14.4v V-Lok batteries.Features Arri Amira Direct Camera Fitting 3x Power-Con (D-Tap) Outputs 1x Lemo 2-Pin OB Output   Suitable for Arri Amira Only      

VL-FS7 V-Lock Adaptor

Hawk-Woods VL-FS7 (VLFS7, VL FS7, VL/FS7, vl-fs7) V-Lock Adaptor The VL-FS7 is a direct V-Lok fitting for Sonys FS7 camera allowing the user to use high powered V-Lok batteries rather than BPU batteries which are the standard battery for the FS7 camera. The adaptor attaches via the lock in mechanism in the FS7s battery compartment and then finally screwed to the top of the camera body to secure in place.  Users have the benefit of 5x Power-con (D-Tap) outputs 11 - 17 volts allowing further equipment/accessories to be powered from the VL-FS7. Power is provided via a short DC Sony EX Jack cable through the FS7s DC Input.  

VLR-SQN4S Adaptor

Hawk-Woods VLR-SQN4S ( VLR/SQN4S , VLR SQN4S , VLRSQN4S ) Adaptor The stand-alone VLR-SQN4S V-Lok adaptor is an ideal option for sound recordists. It offers battery power distribution via a power-con socket, four regulated switchable hirose sockets and a Hirose plug on a flying lead.