Rycote 010321 Super-Shield Kit, Medium

code: 10321
Status   |   Usually dispatched within 24 hours
Loading...

Rycote 010321 Super-Shield Kit, Medium

The Super-Shield Kit is a complete windshield and shock mounting system for shotgun microphones from 200-250mm in length

Main Benefits:

Lightweight basket windshield system with a minimum number of parts, simple to use.

Configurable for aerodynamic and centre-of-mass balance.

Excellent wind noise reduction and lyre-standard isolation from handling noise.

 

Removable fur Windjammer to add the highest levels of wind noise suppression.

The Super-Shield Kit is a complete windshield and shock mounting system for shotgun microphones from 200-250mm in length.

Suspension

The Super-Shield Suspension provides your microphone isolation from shocks and vibrations, thanks to its patented Lyre technology. The Lyre cuts handling noise with any axial microphones, without the use of rubbers or elastic and is the accepted broadcast industry standard. The suspension is suitable for microphones 19mm (3/4”) to 25mm (1”) in shaft diameter, using two snap-in, pinch-release Lyre suspensions, that can be slotted into any of six positions for perfect balance and fit. The suspension comes supplied with an 18” (450mm) highly flexibility microphone cable.

Windshield

The Super-Shield Windshield is made up from two “pods” which attach to the central chassis. They are lightweight, durable baskets made from flexible grey plastic netting with a screening material attached. The windshield has a twist lock system onto the suspension chassis ring, and when fitted completely surround the whole microphone, connector and suspension. This system creates a still volume of air around the microphone, which provides excellent wind-noise reduction, with minimal High-Frequency loss.

Windjammer

The Windjammer is a high-quality synthetic fur cover which provides excellent protection against extreme wind noise.

The Super-Shield Windjammer is handmade in the UK from highest quality materials available, which are specially designed and manufactured for the purpose. As a result it has very little detrimental effect on the high frequencies in the audio being captured.


Includes:

  • 1 x 010420 Super-Shield, Rear Pod (All sizes)
  • 1 x 020521 Super-Shield, Windjammer (Medium)
  • 1 x 017013 45cm XLR-3F/3M cable (3.0mm)
  • 1 x 010422 Super-Shield, Front Pod (Medium)
  • S-Series Chassis and Handle

 


Compatible with:

  • Audio-Technica AT 4073a (BP4073)
  • DPA 4017
  • Neumann KMR 81i
  • RODE NTG-1
  • RODE NTG-3
  • Sanken CS 2
  • Schoeps CMIT 5U
  • Sennheiser MKH 416
  • Shure VP82
  • Shure VP89S
  • Sony ECM 670
  • Sony ECM 678
  • Neumann KMR-81D
  • RØDE NTG-4+

 


Super-Shield Kit, Medium

Part no.010321

Suitable for: Mics 19/25mm, from 200-250mm length

Body length: 300mm

Overall Length: 400mm

Max. Diameter: 100mm

Net Weight*: 662 gram

*Net weight includes Suspension, pistol grip, XLR cable, Windshield & Windjammer

 
Be the first to review 010321 Super-Shield Kit, Medium. Write a review ›