Browse here at DigiBroadcast for a wide range of studio cables at fantastic prices. Our audio cables are comprised of high-quality materials and designed especially for use within the broadcasting industry. Among our stock, you’ll find products from the industry’s leading brands, including Datavideo, Sennheiser and Sony to name just a few, all of whom are providers of the highest quality audio cabling. If you’re searching for related products, discover our selection of wireless transmission products plus sound spares and accessories.
Connector 1 : HDMI Type-A Male Connector 2 : HDMI Type-A Male Cable Length : 11.8 to 17.7" / 30 to 45 cm Packaging Info Package Weight : 0.15 lb Box Dimensions (LxWxH) : 5.1 x 3.5 x 0.6"
Features: Multi-functional controller to remote control camera, TLM-430 Look Back monitor & DN-60A CompactFlash card recorder Controls Camcorder Pause / Record / Zoom plus Record on Datavideo DN-60A Recorder Zoom Control with variable speed Controls switch to return feed input on Datavideo TLM-430 Look Back Monitor Mounts on to Tripod Arm Supports Sony LANC Control - suitable for many...
DATAVIDEO DATA-CB47 (DATACB47 DATA CB47 DATA/CB47) All-in-One Cable (BNC and 5-pin XLR Intercom) - 50M
DATAVIDEO DATA-CB31 (DATACB31 DATA CB31 DATA/CB31) 50M All in One Video Cable Set
DATAVIDEO DATA-CB46 (DATACB46 DATA CB46 DATA/CB46) All-in-One Cable (BNC and 5-pin XLR Intercom) - 30M
POLECAM RC150 (RC 150 RC-150 RC/150) RCP MK IV RX unit (when ordering remember to specify the cables you will need)
• Control of up to six cameras
• Different camera types accommodated
• Compatible with major manufacturers' cameras; e.g. Camera Corps, Hitachi, Indiecam, JVC, Panasonic, Sony, Toshiba, etc.
• Allows remote operation of Polecam recommended Toshiba and Indiecam cameras
• Remote receiver box (RX) complements the Polecam RCP
• Colour balance, master pedestal, gain, detail and other engineering parameters can be remotely adjusted
• High signal robustness >1500 metres
• Iris control
• Option of joystick remote control for POLECAM pan & tilt head available
• Rack mountable
• Red and green operator tally lights
• Integrates easily into any OB or multicamera set-up
The new Mark IV Polecam universal Remote Control Panel (RCP) provides comprehensive control of up to six camera types using a single balanced audio sine wave data signal.
A remote receiver box (RX unit) complements the RCP Transmitter (TX unit) is operable in excess of 1500m away (at 1200 baud). The data signal can be integrated with many professional RF audiolink systems. The RX Box provides both a 12v DC supply and control data to the camera.
The RCP is ideal for both multi-camera studio and OB work.
A POLECAM rig could be left without an operator and the positional pan and tilt unit be remotely controlled by the RCP in an OB vehicle. e.g. Behind the goal in football.
The new Polecam Universal RCP MK IV remote control panel allows comprehensive and intuitive control of up to six different camera types from a single unit. The control format used is a highly robust audio sine-wave data signal which can run at 1,200, 2,400 or 4,800 baud. This allows the RCP to be linked via balanced audio cable to the RX Box receiver which can be located up to and beyond 1,500 metres away, depending on baud rate and cable quality. The RX Box provides both 12 V DC and control data to the camera. It incorporates a camera channel select switch, all other functions including baud rate selection and camera type being automatic. Other facilities provided by the RX Box include dual tally drive outputs and remote activation of devices such as lens blowers and windscreen wipers.
The Universal RCP MK IV is compatible with ultra-compact HD cameras from manufacturers such as Camera Corps, Hitachi, Panasonic, Sony and Toshiba. Pan, tilt and iris motor drive outputs are also provided. Parameters such as colour balance, master pedestal, gain and detail can be remotely adjusted provided these features are supported within the camera itself. A single pan, tilt and iris drive connector (six-pin LEMO) is provided for integration with a Polecam system and can also be configured to complement various OEM pan/tilt heads and lenses.
Each camera-selection push button on the RCP, when activated, displays the most recently selected menu for its camera. Frequently-used menus for a particular camera type are thus instantly available. Other controls include dedicated white-balance and black-balance buttons, colour-bars selector, black level controls for the red and blue channels plus master black level and iris/exposure. Data output parameters can be adjusted via DIP switches and a data level control.
"For the Polecam user, the Universal RCP MKIV is essential to multi-camera studio and OB work. It can be mounted alongside the existing camera RCPs, enabling colour matching and other adjustments by the engineers. It can also be used to allow pan and tilt of a pre-positioned Polecam rig, behind a football goal for example, to be remotely controlled from an OB vehicle. The panel is very easy to operate, extremely versatile and highly compact: just 110 mm long, 105 mm wide and 60 mm deep. For the multi-camera user, it provides economical control of multiple different cameras from a single panel."
DATAVIDEO DATA-DDC4012H (DDC4012H, DDC 4012 H) In-Line XLR DC to DC 9-12v Converter
High Power Version : Supports 48v / for use with PD-6
9-30v XLR Input, Switchable 7.2/12v 2.1mm Locking Collar DC Output