Model : RP-DC30 Traveler Battery Charger AC Power In : AC 110 – 240V , 50/60Hz DC Power In : DC 12V Power Consumption : Max 35W Power Output : DC 3.6V – 8.4V. 800 mA (Max) (auto-change the voltage according to the installed optional charging plate) DC Power Input : DC 12V / 25W...
Capacity: 49wh (14.8vdc, 3.3Ah) Size: 5.1 x 3.6 x 1.55 Weight: 1.3lbs. Normal Runtime: approx. 8.25 hours (Sony A7 w/o accessories) Max Continuous Load: 8A
Material of Construction: Shock-Resistant, PPS Aircraft-Grade Materials Battery Mount: 1 x Gold Mount, 1 x V-Mount Dimensions: 3.38 x 5.5 x 1" / 8.59 x 13.97 x 2.54 cm Weight: 0.44 lb / 0.2 kg Packaging Info Package Weight: 0.8 lb Box Dimensions (LxWxH): 8.6 x 5.3 x 2.3"
Model: VLM-FX9 Type: V-Lok Weight: 282g Size: 8.4 x 12 x 8 cm Nominal Voltage: 19.5v Number of D-Taps: 2 Number of USB: 1
Dimensions (W x H x D): 41.5 x 46.1 x 69.7 mm (1 11/16 x 1 7/8 x 2 3/4 inches) Mass: Approx. 235 g (8.3 oz) Maximum/nominal voltage: 16.4 V DC/14.4 V DC Capacity: 35 Wh Charging time (using the BC-U1A/U2A): Approx. 90 minutes Operating temperature (when discharging / charging): -20°C to + 45°C...
Capacity: 3.4Ah 50Wh Voltage: 14.8V Working Current: 8A (max.) USB-A Output: 5V/2.4A | 9V/2A | 12V/1.5A USB-C In/Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.2A Micro USB Input: 5V/3A D-Tap In- / Output: Yes (1x) Dimensions: 100(L)mm*71(W)mm*35(H)mm Max. Current: 8.0A Weight: 310g
Nominal Capacity:7200mAh
Dimensions HxWxD(cm): 15.4 x8.4 x4 Weight: 255g Power Output: 35 Watts / 12V regulated Output Types: 1x Power-Con (12V regulated) 2x Hirose (12V regulated) Fused with a self-resetting device Compatible with Sony V-Mount products Radio mic bracket (compatible with the HW RMH range) Lightweight construction
Dimensions HxWxD(cm): 15.2 x8.5 x7.5 Weight: 530g Charging Channels: 1 Charging Current of 2.3A Universal Mains Input Ultra Small & Ultra Light V-Lok & Sony BPL Compatible
Maximum Output| 120W / 10A Dimensions| 96(W) x 135(H) x 27(D) mm Weight| 200g approx
Height: 101 mm Width: 101 mm
Compatible Batteries: NP-L7S Compatible Chargers: All ENDURA chargers Dimensions: 76(W) x 143(H) x 41(D) mm Weight: 270 grams approx.
XLR Pin Assignment: 1. ( – ), 4. ( + ) D-Tap Output Voltage: 12~16.8V DC Maximum Plate Output: 120W/10A Dimensions: 67(W) x 106(H) x 35(D) mm Weight: 270 grams approx.
SPECIFICATION:Input Voltage:Quick Charge Current:Dimensions:Weight: AC100~240V 50/60Hz 2.3A: Li-ion batteries151(W) x 70(H) x 212(D) mm800g approx.
Maximum Output for D-Tap:: 50W Dimensions:: 3.25(W) x 5.59(H) x 0.47(D) inches Weight: P-V2: 0.36 lbs. approx.
Max D-Tap Output: 50W Dimensions: 82.5(W) x 142(H) x 12(D) mm Weight: 180g approx.
SPECIFICATION: Quick charge current: All ENDURA & NP-style Li-ion batteries - 2.3A.; Ni-Cad batteries – 1.9A Input Voltage: AC100-240V 50/60Hz Dimensions: 5.94(W)x3.11(H)x8.35(D) inches Weight: 2.09 lbs approx Compatible batteries: All IDX ENDURA System Li-ion batteries and all IDX NP-style Li-ion batteries via A-E2NP charger adaptor.4-pin XLR power supply connecting cable is included (10 ft.).
PAG 9304 PAGlink PL96T Time Battery
Model 9304 FEATURES:
The PL96T is a high-power, intelligent linking battery, and part of the PAGlink system.
PAGlink is the only system that allows you to combine the capacities of two to eight batteries in any state of charge, to achieve super-high capacities and a higher current-draw capability.
It is the only system that allows you to charge batteries whilst linked.
PAGlink batteries can be used individually or linked to power a variety of cameras including: high-definition broadcast cameras, digital cinema and 3D camera set-ups, HDSLRs and handheld camcorders.
An individual PAGlink battery has a capacity of 96 watt-hours, making it unrestricted, in quantity, for air transportation. Linking two batteries doubles the capacity to 192Wh; three batteries provide 288Wh. No other system offers as much power.
Hard-wearing, heavy duty contacts are incorporated for high-current applications. The rated maximum continuous output is 12A when linked (8A individually).
PAGlink is smarter. Other manufacturers use more expensive cell-technology to sustain a current draw of only 10A, while PAGlink achieves a superior 12A, using cheaper, standard Li-Ion technology.
As well as being smarter, PAGlink batteries are smaller and lighter, with a higher energy density than any linking system marketed to date.
Linked batteries form a high speed serial network that enables them to communicate with each other to control charge and discharge.
The rear battery can be hot-swapped for constant, uninterrupted camera power.
The battery features long-life, premier-quality Li-Ion cells, which have no memory effect, and are completely recyclable. In keeping with PAGs total battery design philosophy it is designed and constructed to provide the longest possible working life.
The PL96T Time Battery incorporates a numeric run-time and capacity display, unique to PAG. Remaining run-time is shown, on-load, expressed in hours and minutes, to a resolution of 1 minute. Remaining capacity is shown as a percentage (1% increments).
The display maintains its accuracy by tracking the performance, and adjusting calibration values to compensate for the ageing of the cells, and does not require a periodic â€Ëœserviceâ€â„¢ charge.
The PL96T can be linked to a PL96e battery to provide a numeric display of remaining run-time for all linked batteries.
PAGlink batteries support four different data systems that display capacity in the camera viewfinder: Sony, IDX, Red and Anton-Bauer, and adapt automatically when connected.
PAGlink batteries store data in their microprocessor, such as capacity, voltage, number of cycles and software version, which can be revealed using the PAGlink Battery Reader (Model 9647), to assist with the management of battery stocks.
The battery software can be updated using a PAGlink Battery Programmer, ensuring that you benefit from PAGs continually advancing technology.
PAGlink batteries can be charged while linked, using any reputable V-Mount Li-Ion charger.
The new, 2-position PL16 charger (Model 9707) will simultaneously charge up to 16 PAGlink batteries (8 on each position), from any state of charge.
PAGlink batteries display their individual status during charging. When using the PL16 charger, the PL96T numeric display can be inverted, for legibility, with a single button press, and reverts automatically after removal from the charger.
The PL96T has been independently tested and certified to comply with UN transport safety regulations. Its capacity is below 100 watt-hours and it is therefore suitable for air transport on passenger aircraft, in hand-luggage, without quantity restriction.
The batterys advanced electronic protection system is fail-safe and features Parylene coated circuits to protect against electrolyte.
Enhanced low temperature performance allows PAGlink batteries to operate at -20°C.
Chemistry: LI-ION Volts: 7.4V (Compatible with 7.2V) Capacity: 6600mAh
Power Requirements: AC 100 to 240V, 50/60 Hz Power consumption: Less than 168 VA DC output: Max. 16.8 V, 6A Operating tempurature: 0 to +45 degrees C (32 to 113 degrees F) Dimensions (w x h x d): 60 x 237 x136mm (2 3/8 x 9 3/8 x 5 3/8 inches) w/o projection Mass: Approx....
Input: AC 100V-240V 50/60Hz Charging output: DC 8.4V, 2A×2 Adapting output: DC 8.4V, 4A Applicable battery: S-8945, Canon BP series BP-930/945 Applicable camera: Canon XM1/XM2, XL1/XL2, XH-A1/G1/H1 Dimension: 136×110×47mm Weight: 0.36kg
Power input: AC 100V-240V 50/60Hz Charging output: DC 8.4V, 2A×2 Adapting output: DC 8.4V, 3.5A Applicable battery: S-8972, S-8970, S-8770, SONY L series NP-F770/970/960/950 Applicable camera: SONY HVR-V1E, HVR-Z1E/Z7E, etc Dimension: 136×110×47mm Weight: 0.36kg
Power input: AC 100V-240V 50/60Hz Charging output: DC 16.7V, 1.9A Adapting output: DC 12V, 1.9A Applicable battery: S-8U65 S-8U95, SONY BP-U60, BP-U30 Applicable camera: SONY PMW-EX1/EX3, PMW-100/200 Dimension: 136×110×53mm Weight: 0.38kg
Output voltage DC 14.4V Cable length Approx 2ft/0.6m