General Power requirements: AC 100 to 240V, 50/60 Hz, DC +12V, Battery Power consumption: AC: 65 W, DC: 55 W Operating temperature: -5 to +45C (+23 to 113F) Storage temperature: -20 to +60C (-4 to +140F) Humidity: 20 to 90% (relative humidity) Mass: 7.4 kg (16 lb 5 oz) Dimensions (W x H x D)...
PHU-120K Specifications: Interface: ExpressCard™/34 USB2.0 Transfer speed: 24 MBps (190 Mbps) Operating voltage: DC 12 V ±0.5 V, Battery: 14.6 + 1.8V /–0.0 V Power consumption: TYP. Approx.2.5 W, MAX. Approx.4.0 W Operating temperature: 0° C to 40° C Operating relative...
General Recording Format : F65RAW Power Requirements : 11 to 17 V DC Power Consumption : Approx. 37 W (when recording at F65RAW 23.98PsF mode) Operating Temperature : 0°C to 40°C 32°F to 104°F Storage Temperature : -20°C to +60°C -4°F to +140°F Humidity : 10% to 95% (no condensation) Mass : 1.8 kg (excluding control panel...
Remote Control Unit Compatible with the JVC GY-HD251E Camera Camera control up to 100m via multicore cable HD and SD analogue component signals HD/SD SDI in and out Studio CCU with HD SDI for the GY-HD251E/GY-HM790 Camera's. KeyFeatures: HD/SD SDI in and out (through), in conjunction with GY-HD251E and JVC special 26-pin...
VITEC Proxsys PA SeriesWhat we think:Many buyers think Digital asset management (DAM) is just too complex, too expensive and suitable only for big organizations. Proxsys PA will change all that. It's a turnkey system that combines local online video storage with a tape drive for long-term archiving. Not only does it support media and video...
Features : Digital signal transmission ensures high-quality, degradation-free images. The base station and camera adaptor can be separated up to a distance of 328' (100 meters). Connection with two BNC cables allows transmission of HD digital images, return images, tally signals, mic signals, and genlock signals. Connection of...
TV1-CMDVIU2IN TV ONE Dual DVI-U Input Card (2x DVI-U (DVI, HDMI, RGB/YUV, CV, YC) via DVI-I)
Video Choreography Design Possibilities
C3-540 CORIO®master offers a new, more efficient approach to building video systems. Using TV One's latest CORIO®3 technology, it gives the user access to new levels of video processing power to achieve new heights of creative and dynamic video displays. All this is possible in one 4RU chassis.
CORIO®3 video
processing technology allows the use of layouts which define where each output is used. Outputs can be independently rotated through 360º in real-time, without adding delay, for use in creative video wall applications. Projectors can be used off axis with brightness controls to aid in an even distribution of the projected image. Warping controls allow for projection on curved surfaces. Multiple layouts can be used at the same time or one layout can be designed to tie multiple projectors or monitors together as one large image.
Edge blending, monitor walls and multiple projectors can show any combination of inputs by setting up canvases to design each layout without the limitation of a monitor or projector dedicated to just one source input. Multiple canvases can be used at the same time to define multiple layouts to aid in choreographing a video design. To further assist functionality, multiple windows can be used to design a canvas with the capability to resize and rotate each window on the canvas which is then sent to the predefined layout. The same canvas can be sent to more than one layout design. This allows for duplication in more than one area or used for status display on one monitor of the entire canvas.
The CORIOmaster also includes a multi-viewer to monitor the inputs to aid in previewing the sources during live events or used as a status monitor in various types of installations. Graphic images can be loaded into the CORIOmaster to use as backgrounds as well as for use on each canvas.
Control of the CORIOmaster is provided by a multiplatform software package that provides an intuitive way of setting up layouts and defining the canvas to be used for each layout. Presets can be saved and recalled. Changes can be made to the canvas and then transferred to the layout.
The flexibility to use various input formats and the ability to up, down, and cross covert those signals on the outputs of the CORIOmaster to various displays and projectors of any format allow for easy installation without the use of multiple pieces of equipment to accomplish the same task all accomplished in a 4RU chassis.
The CORIOmaster is high power in its capabilities, but low in its power consumption. It typically requires only 160 watts, fully loaded. A traditional video system that performs the same tasks can consume ten times as much energy. Over its life, that is a lot of savings.
Physical Properties
The C3-540 has 16 Uuniversal AV Module slots available and the CORIOmaster automatically recognizes the modules inserted as either input or output modules. There is no dedicated input or output slots when using 2-Channel DVI-U or 3G-SDI modules. This flexibility allows end user configurations to be based on their own needs. Additional DVI-U or 3G-SDI modules can be added later in spare slots without having to reset the unit. All AV modules are hot swappable and recognized for immediate auto configuration.
CORIOmaster also provides independent Up, Down and Cross conversion for every output between a variety of analog and digital video formats thru 3G-SDI and WUXGA. The modules selected determine what format will be accommodated and the matrix size. Signal parameters of the incoming video may be adjusted. All settings are stored in non-volatile memory and are retained even when power is switched off. User defined presets are also available to customize settings for various applications.
All the functions can be controlled via serial connection via RS-232/422/485, USB or IP. A front panel LCD option makes direct setup easy. The unit is housed in a standard 4RU rackmount case and features an optional redundant hot swappable internal PSU and power inlet.
TV1-CM3GSDI2IN TV ONE 2 x SDI Input Card (2x 3G/HD/SD-SDI via BNC)
Video Choreography Design Possibilities
C3-540 CORIO®master offers a new, more efficient approach to building video systems. Using TV One's latest CORIO®3 technology, it gives the user access to new levels of video processing power to achieve new heights of creative and dynamic video displays. All this is possible in one 4RU chassis.
CORIO®3 video
processing technology allows the use of layouts which define where each output is used. Outputs can be independently rotated through 360º in real-time, without adding delay, for use in creative video wall applications. Projectors can be used off axis with brightness controls to aid in an even distribution of the projected image. Warping controls allow for projection on curved surfaces. Multiple layouts can be used at the same time or one layout can be designed to tie multiple projectors or monitors together as one large image.
Edge blending, monitor walls and multiple projectors can show any combination of inputs by setting up canvases to design each layout without the limitation of a monitor or projector dedicated to just one source input. Multiple canvases can be used at the same time to define multiple layouts to aid in choreographing a video design. To further assist functionality, multiple windows can be used to design a canvas with the capability to resize and rotate each window on the canvas which is then sent to the predefined layout. The same canvas can be sent to more than one layout design. This allows for duplication in more than one area or used for status display on one monitor of the entire canvas.
The CORIOmaster also includes a multi-viewer to monitor the inputs to aid in previewing the sources during live events or used as a status monitor in various types of installations. Graphic images can be loaded into the CORIOmaster to use as backgrounds as well as for use on each canvas.
Control of the CORIOmaster is provided by a multiplatform software package that provides an intuitive way of setting up layouts and defining the canvas to be used for each layout. Presets can be saved and recalled. Changes can be made to the canvas and then transferred to the layout.
The flexibility to use various input formats and the ability to up, down, and cross covert those signals on the outputs of the CORIOmaster to various displays and projectors of any format allow for easy installation without the use of multiple pieces of equipment to accomplish the same task all accomplished in a 4RU chassis.
The CORIOmaster is high power in its capabilities, but low in its power consumption. It typically requires only 160 watts, fully loaded. A traditional video system that performs the same tasks can consume ten times as much energy. Over its life, that is a lot of savings.
Physical Properties
The C3-540 has 16 Uuniversal AV Module slots available and the CORIOmaster automatically recognizes the modules inserted as either input or output modules. There is no dedicated input or output slots when using 2-Channel DVI-U or 3G-SDI modules. This flexibility allows end user configurations to be based on their own needs. Additional DVI-U or 3G-SDI modules can be added later in spare slots without having to reset the unit. All AV modules are hot swappable and recognized for immediate auto configuration.
CORIOmaster also provides independent Up, Down and Cross conversion for every output between a variety of analog and digital video formats thru 3G-SDI and WUXGA. The modules selected determine what format will be accommodated and the matrix size. Signal parameters of the incoming video may be adjusted. All settings are stored in non-volatile memory and are retained even when power is switched off. User defined presets are also available to customize settings for various applications.
All the functions can be controlled via serial connection via RS-232/422/485, USB or IP. A front panel LCD option makes direct setup easy. The unit is housed in a standard 4RU rackmount case and features an optional redundant hot swappable internal PSU and power inlet.
TV1-HDBTXSC2OUT1ETH TV ONE 2 x HDBaseT Out 1 x Ethernet Input (single Cat.5e/6) for CORIO Matrix Only
TV1-HDBTSC2OUT1ETH TV ONE 2 x HDBaseT Out 1 x Ethernet Input (single Cat.5e/6)
Scaler Modules Provide
Options
TV1-CMHDSDI4IN TV ONE 4 x SDI Input Card (4x HD/SD-SDI via BNC)
Video Choreography Design Possibilities
TV1-CM3GSDISC2OUT TV ONE 2 x SDI Output Card with scaling (2x 3G/HD/SD-SDI via BNC)
Video Choreography Design Possibilities
TV1-CM3GSDIXSC2OUT TV ONE 2 x SDI Output Card with scaling for CORIO Matrix Only (2x 3G/HD/SD-SDI)
Scaler Modules Provide
Options
TV1-CMAUD8IN8OUT TV ONE Audio Interface Module (8x Inputs and 8x Outputs via HD-44 Connector)
Video Choreography Design Possibilities
TV1-CMDVIUMON2OUT TV ONE Monitoring Card (2x DVI-U via DVI-I Connectors)
Video Choreography Design Possibilities
TV1-C3-510-1001 TV ONE CorioMaster Mini Chassis 5 Slots for Audio/Video Modules + 2 Dedicated DVI Input Up to 12 I/O for DVI, HDMI, 3G-SDI, RGB/YPbPr (Factory Installed) With Blank Front Panel and Single Power Supply. IP & RS-232 Interface Edge Blending, Video Wall Processing, Multiviewer, Windowing
TV1-C2-6104A TV ONE C2-6104A CORIOview 4-Window DVI-I Multiviewer Max Resolutions - DVI: 1920x1200, 1080p, Analog RGB: 2048x2048, 1080p Inputs: 4x DVI-I plus 1x DVI-I for Background and Cascading. Output: 1x DVI-I Options: Tally Module
CORIOview C2-6104 4-Window DVI-I Processor is based on TV One's exclusive CORIO®2 technology and has four 3G-SDI inputs plus a DVI-I input (for window, cascade or background use) to place up to 4 sizeable windows on a single DVI-I / 3G SDI output. Each window is powered by a CORIO®2 scaler providing full PIP flexibility.
3G-SDI resolutions up to 1080p60 are supported. High performance de-interlacing with motion-adaptive noise reduction are available for interlaced SDI and YPbPr sources. The unit provides a DVI-I output as well as a duplicate 3G-SDI capable output.
All settings are stored in non-volatile memory and are retained even when power is switched off. Ten user defined presets (controllable directly from the front panel or external communications) are also available to customize settings for various applications. A built-in LCD and menu system aids quick setup. Functions can be controlled via the front panel Push Buttons, RS-232/ RS-422/RS-485 or Ethernet.
Color borders and source labeling are also provided for each window. Four Still Image Stores are built into the unit which can each display one of ten user loadable graphic images to be used in place of an input. The 5th input is available for use as a window source, background to the 4 windows, or as a cascade input from another CORIOview unit thus adding 4 more windows per unit.
The CORIO®tool Suite integrates fully with the unit and most third party control systems interface directly with the entire C2 range of products.
Variable Zoom to 10X allows you to enlarge any part of the graphic image to fill the entire computer screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting multiple images next to each other, with full positional controls.
Colored stereo audio bars are available for each window, and show the live audio activity of an SDI source.
Advanced Features include Genlock, Chromakey, Lumakey and Mixing. The Key Mode allows any window to be keyed over any other with variable priority / layer control. The keyed image may be faded in and out.
The unit is housed in a 1RU case with rack mount ears provided and is powered from a standard 110-240v supply.
The TV One CORIOview C2-6104A 4-window DVI-I Processor is a multi-window video processor that allows display of up to 4 substantially sized windows on a single DVI-I output. Four, high performance CORIO2 Scaling Engines power the 4 windows respectively, providing complete PIP flexibility. CORIO2 is a proprietary technology integrated into chipsets to allow for freedom from constraints imposed by third-party chipsets.
Conditions of obsolescence can be eliminated as firmware can be upgraded from the support website. Five DVI-U inputs, sustained by the exclusive CORIO2 technology, offer similar features as DVI-I inputs, with the additional capability of accepting composite video signals. The fifth input is reserved only for reference, background usage or cascading of multiple units.
Four internal still image stores are incorporated into the CORIOview C2-6104A Processor, each allowing the display of one of ten user loadable images in place of an input. DVI-D resolution of 1920x1200@60Hz and 1080p, along with a DVI-A analog resolution of 2048x2048@60Hz is possible at any refresh rate. A wide range of analog inputs such as RGBHV/RGBS/RGsB/YPbPr/CV are supported by the CORIOview C2-6104A 4-window DVI-I Processor, providing a high measure of flexibility.
TV1-C2-2375A TV ONE C2-2375A Universal 3G Up/Down/Cross Converter w/Audio Processing. Max HD-SDI 1080p/60 (3G) Inputs: 2x 3G/HD/SD-SDI, 2x DVI-U (DVI, YUV, YPbPr, RGB, CV, YC), 1x SDI & BB Ref Outputs: 2x 3G/HD/SD-SDI, 2x DVI-U (DVI, YUV, YPbPr, RGB, CV, YC) Options: Tally, Clock, Redundant Power Supply, Audio Interface for A2-7300 Series
TV1-1T-C2-750 TV ONE One Task C2-750 Dual PIP DVI-I Scaler With Key, Mix & Seemless Switching. Max Resolution 1920x1200, 1080p Inputs: 2 x DVI-I Output : 1 x DVI-I HDCP Compliant, HDMI Compatible, Two Integral Still Image Stores. IR + RS-232
TV1-LM1750HD TV ONE LM1750HD 17"" High Definition Universal LCD Rackmount Monitor Inputs: SD/HD-SDI, HDMI, PC, YC, YUV/YPbPr via 3-BNC 2xCV via BNC, 5xStereo PC resolutions up to 1400x900, 1080p. HDMI up to 1080p Front Panel Tally Indicators with external input. RS-232. NTSC-PAL Auto-detection
LM-1750HD is a high performance Multi-format 17 Colour LCD Monitor for the broadcast and professional market. A multitude of video signal formats may be accurately monitored. The high brightness, wide viewing angle, excellent contrast ratio and high definition colour result in an outstanding image. The unit features inputs for SDI (either SD or HD) with an active output, HDMI, Analogue RGBHV, YUV or YPbPr Component Video and 2x Composite Video. An YC input is available and can be used in lieu of one of the Composite inputs. NTSC and PAL Television Standards are supported and automatically detected. Five Stereo inputs are also provided and dual internal speakers driven by a 3 watt amplifier provide stereo audio monitoring capability. Front panel Tally LED can be activated external via the DB9 connector.
The Menu contains all the necessary controls to adjust Contrast, Brightness, Sharpness, Colour, Hue, Black Stretch and other parameters necessary for optimum monitor performance. Results of these adjustments can be viewed via the On Screen Display. A Sync Delay (Pulse Cross) mode allows viewing of the vertical and horizontal sync and vertical blanking intervals. A Blue Only mode facilitates accurate monitor setup when viewing color bars.
The metal case has a standard VESA mount on the rear panel. A rackmount kit is included that can tilt up or down. Although the monitor has excellent viewing angles, the tilt feature can be beneficial when circumstances necessitate mounting the monitor considerably above or below normal eye level.
Recording Format 24fps 25fps 30fps 50fps 60fpsApple ProRes 422 (HQ) (10-Bit compressed 1080p HD) 670 644 580 2K/1080p HD Video (Uncompressed 10-bit DPX) 87 84 70 2K/1080p HD Video (Uncompressed 12-bit DPX) 74 72 70 42 35 ARRIRAW 16:9 100 97 80 46 40ARRIRAW 4:3 (48fps top speed = 38 minutes) 76 73 60 Canon...
Power requirements: AC 100 V to 240 V, 50/60 Hz Power consumption: 80 W (with 1 drive) 100 W (with 2 drives)* Operation temperature: 5C to 40C / 41F to 104F Storage temperature: -20C to +60C / -4F to +140F Operating humidity: 20% to 90% (at 25C/77F, no condensation) Mass: 28 kg (with 1 drive...
XDS-1000 Specs Mass: 17 kg (37 lb 8 oz) Dimension (W x H x D): 424 x 132 x 460 mm (16 3/4 x 5 1/4 x 18 1/8 inches) Power Requirements: AC 100 V to 240 V, 50 Hz/60 Hz, 190 W Recording time, 50 Mbps Video: Approx. 12.5 W (while recording, EVF On,...
It features output scaling capabilities, and is HDCP compliant.