Battery rated at 5800mAh at 7.2VDC Compatible with the AJ-PX270 and AG-AC8 camera recorders Battery level indicator Longer run times than previous models
General Accessory Type Battery mounting base Width 4.1 in Depth 1.7 in Height 4.7 in Weight 15.98 oz Accessories Intended For Camcorder Connections DC power input, 2 x DC power output Miscellaneous Material Aluminum Packaging Info Package Weight 1.8 lb Box Dimensions (LxWxH) 6.9 x 6.9 x 3.1"
Dimensions Height: 4.29 in. (109 mm) Width: 4.41 in. (112 mm) Depth: 1.52 in. (39 mm) Weight Approximately 0.94 lbs (425 g), Module Only Construction Aluminum Alloy Operating Temperature 0°C to 40°C (32°F to 104°F) Storage Temperature –20°C to 50°C (–4°F to 122°F) Connectors CHARGE IN (6-Pin 1B LEMO) AUX POWER OUT (2-Pin 0B LEMO)...
Mount / Series Type REDVOLT Chemistry Lithium-Ion Capacity (Wh) 37 Wh Amp-Hours 2.5 Ah Output Voltage 14.8 VDC Operating Temperature 32 to 104°F / 0 to 40°C Storage Temperature -4 to 68°F / -20 to 20°C Charging Temperature 32 to 113°F / 0 to 45°C Dimensions (W x H x D) 3.23 x 1.69 x...
Swit LB-CA50 Battery, Used
3 month warranty
LB-CA50 is the replacement battery for Canon BP-A60 battery, power Canon EOS
C300mk2 and C200 cameras via additional D-tap to camera DC-IN cable.
73Wh / 5.1Ah capacity
With 14.4V nominal voltage, the LB-CA50 has 73Wh / 5.1Ah capacity and can run approx. 6 hours on Canon EOS C300mk2 camera when LCD monitor is on.
D-tap to DC-IN cable
The special D-tap cable PA-B2L4 is for LB-CA50 battery to power Canon EOS
C300mk2 and C200 cameras.
Charge via D-tap socket
The LB-CA50 can only be charged via D-tap socket. SWIT provides the Dual D-tap heads 3A portable charger PC-U130B2 to charge LB-CA50 battery.
It takes 3 hours and 30 minutes to charge 2 LB-CA50 batteries from 0 to 100%.
Build-in 5V 1A USB socket
LB-CA50 has a 5V/1A USB-A power output socket to power cell phone or other devices. Press the “Check” button to trigger on USB output and the USB output will automatically switched off if no devices detected for a period of time, to save energy.
4-level LED Power Indicator
The LB-CA50 battery has the 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using.
Nominal Voltage: 14.4V
Capacity: 73Wh , 5.1Ah
Max output power
Total: 50W, 3.5A
Pins: 50W, 3.5A
USB: 5W, 1A
Applicable camera : Canon EOS C300MK2, Canon EOS C200 Net weight : Approx 410g Dimensions : 41.5×69.6×96.1mm
Swit LB-CA50 (LB-CA50, LB-CA50, LB-CA50) Canon EOS-C300MK2 Battery Pack
3 month warranty
LB-CA50 is the replacement battery for Canon BP-A60 battery, power Canon EOS
C300mk2 and C200 cameras via additional D-tap to camera DC-IN cable.
73Wh / 5.1Ah capacity
With 14.4V nominal voltage, the LB-CA50 has 73Wh / 5.1Ah capacity and can run approx. 6 hours on Canon EOS C300mk2 camera when LCD monitor is on.
D-tap to DC-IN cable
The special D-tap cable PA-B2L4 is for LB-CA50 battery to power Canon EOS
C300mk2 and C200 cameras.
Charge via D-tap socket
The LB-CA50 can only be charged via D-tap socket. SWIT provides the Dual D-tap heads 3A portable charger PC-U130B2 to charge LB-CA50 battery.
It takes 3 hours and 30 minutes to charge 2 LB-CA50 batteries from 0 to 100%.
Build-in 5V 1A USB socket
LB-CA50 has a 5V/1A USB-A power output socket to power cell phone or other devices. Press the “Check” button to trigger on USB output and the USB output will automatically switched off if no devices detected for a period of time, to save energy.
4-level LED Power Indicator
The LB-CA50 battery has the 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using.
Nominal Voltage: 14.4V
Capacity: 73Wh , 5.1Ah
Max output power
Total: 50W, 3.5A
Pins: 50W, 3.5A
USB: 5W, 1A
Applicable camera : Canon EOS C300MK2, Canon EOS C200 Net weight : Approx 410g Dimensions : 41.5×69.6×96.1mm
DSM-U84 Fits directly to the camera ( Without a Cable) Minutes remaining displays in viewfinder Capacity: 84Wh 14.8V/5.8Ah Typical camera run-time: over 4 hours 4 LED Fuel gauge Dimensions: Depth 78mm – Width 42mm – Height 69mm Weight: 412g approx
DSM-U84 Fits directly to the camera ( Without a Cable) Minutes remaining displays in viewfinder Capacity: 84Wh 14.8V/5.8Ah Typical camera run-time: over 4 hours 4 LED Fuel gauge Dimensions: Depth 78mm – Width 42mm – Height 69mm Weight: 412g approx
DSM-U84 Fits directly to the camera ( Without a Cable) Minutes remaining displays in viewfinder Capacity: 84Wh 14.8V/5.8Ah Typical camera run-time: over 4 hours 4 LED Fuel gauge Dimensions: Depth 78mm – Width 42mm – Height 69mm Weight: 412g approx
Sony XDCA-FS7 Extension Unit, used
3 months warranty
Extension Unit offers multicamera support for PXW-FS7 including Apple ProRes
422 encoding
While the PXW-FS7 XDCAM camera comes with internal XAVC and MPEG-2 recording on XQD media you can attach the optional XDCA-FS7 Extension Unit. The box is attachable via a MultiPin connector so there are no hassles about cables.
The Extension Unit offers additional I/O connectors like Timecode and Genlock for multi-camera operation or the possibility to use common V-Mount batteries. It also allows RAW data output to record 12-bit RAW footage on the AXS-R5 (in combination with HXR-IFR5), or another third party RAW recorder via the FS RAW Interface. The XDCA-FS7 will encode the video stream into the Apple ProRes 422 codec, which is then recorded on to the internal XQD media.
Apple ProRes 422 recording
A built-in Full HD ProRes encoding function enables ProRes-format recording to an XQD card in the camera.
* Firmware update, early 2015.
Allows 12-bit RAW recording on an external recorder
The XDCA-FS7 is needed for PXW-FS7 to record 12-bit RAW footage on the
AXS-R5 (in combination with HXR-IFR5), or another third party RAW recorder.
The RAW data will be outputted via the FS RAW Interface on the extension unit and is fully compatible with the NEX-FS700 RAW data.
Multi-camera operation
Enables Timecode and Genlock for multi-camera operation or the possibility to use common V-Mount batteries.
Attaches seamlessly to PXW-FS7 camera
The Extension Unit XDCA-FS7 can be connected directly to the PXW-FS7 XDCAM camera to enable the use of functions that support the operator's shooting style or workflow. The unit is attachable via a MultiPin connector so there are no hassles about cables. When using larger lenses, the Extension Unit will balance any possible front heaviness and increase the stability on the shoulder as well.
Apple ProRes 422 recording on XQD card
A built-in Full HD ProRes encoding function enables ProRes-format recording to an XQD card in the camera.
* Firmware update, early 2015.
Allows 12-bit RAW recording on an external recorder
The XDCA-FS7 needed for PXW-FS7 to record 12-bit RAW footage on the AXS-R5 (in combination with HXR-IFR5), or another third party RAW recorder.
Additional I/O connectors for multi-camera operation, plus power support for additional accessoriess
Timecode and Genlock for multi-camera operation. The unit also provides power connection for additional accessories and or the possibility to use common V-Mount batteries.
Welcome to the range of used batteries and power supplies for all kinds of broadcast industry equipment here at DigiBroadcast. Browse all of our second hand camera batteries and power supplies below and find yourself a bargain!
You can save yourself a great deal of money by buying ex demo and display equipment and that is exactly what we have here. Our used batteries and power supplies have only been used in a store environment in order to show customers products hands-on before they decide to buy This means that all of our second hand equipment is virtually brand new, having never been used for any real project or work.
At DigiBroadcast you can also buy brand new equipment including batteries, camcorders, lenses and sound equipment. Or, why not discover some more great deals in our full range of used broadcast industry equipment.